When setting wide_width to 1, convert 'L' to 'l'. Otherwise, %Lx/%Lu/%Ld
will be passed to fprintf which will treat the argument as long long.
* bfd.c (_doprnt): Convert 'L' to 'l' when setting wide_width
to 1.
Fix GCC 4.2 warnings like:
cc1: warnings being treated as errors
binutils-gdb/bfd/dwarf2.c:1844: warning: declaration of ‘time’ shadows a global declaration
/usr/include/time.h:187: warning: shadowed declaration is here
binutils-gdb/bfd/dwarf2.c: In function ‘line_info_add_file_name’:
binutils-gdb/bfd/dwarf2.c:1854: warning: declaration of ‘time’ shadows a global declaration
/usr/include/time.h:187: warning: shadowed declaration is here
bfd/
* dwarf2.c (line_info_add_include_dir_stub): Replace time with
xtime.
(line_info_add_file_name): Likewise.
(decode_line_info): Likewise.
binutils/
* dwarf.c (display_debug_names): Replace index with xindex.
The outer caller elf_link_output_extsym in elflink.c is a traverse function on
all external symbol, and it will only call *finish_dynamic_symbol if some
conditions is meet. It is executed conditionally.
If the condition to trigger that assertion is satisified, it then won't satify
the outer check in finish_dynamic_symbol, so *finish_dynamic_symbol won't be
called that the assertion is expected to be dead code.
If elf_link_output_extsym is a traverse function that unconditionally called
on external symbols decided to be exported, then an assertion to make sure these
symbols are in sane status might make sense.
bfd/
* elfnn-aarch64.c (elfNN_aarch64_finish_dynamic_symbol): Remove the
sanity check at the head of this function.
bfd/ChangeLog:
2017-07-03 Egeyar Bagcioglu <egeyar.bagcioglu@oracle.com>
* elfxx-sparc.c (_bfd_sparc_elf_finish_dynamic_symbol): Remove the
abort statement that was put for symbols that are not dynamic.
One way to print 64-bit bfd_vma or bfd_size_type values on 32-bit
hosts is to cast the value to long long and use the 'll' modifier in
printf format strings. However, that's awkward because we also
support the Microsoft C library printf that uses 'I64' as a modifier
instead, and having variants of translated strings would not endear us
to the translation project. So, rewrite the 'll' modifier in
_doprint for Microsoft. Even with that capability it's not so nice
for 32-bit code to need casts to long long, so this patch makes 'L' a
modifier for bfd_vma rather than an alias for 'll'.
I've then used the new 'L' modifier to fix selected format strings.
* bfd.c (_doprnt): Rewrite "ll" and "L" modifiers to "I64" for
__MSVCRT__. Support "L" modifier for bfd_vma. Formatting.
* elf.c (setup_group): Use "Lx" to print sh_size.
(_bfd_elf_setup_sections): Remove unnecessary cast and print
unknown section type in hex.
(copy_special_section_fields): Style fix.
(bfd_section_from_shdr): Correct format for sh_link. Use a
common error message for all the variants of unrecognized
section types.
(assign_file_positions_for_load_sections): Use "Lx" for lma
adjust error message.
(assign_file_positions_for_non_load_sections): Formatting.
(rewrite_elf_program_header): Formatting. Use "Lx" for
bfd_vma values in error messages.
* elfcode.h (elf_slurp_reloc_table_from_section): Cast
ELF_R_SYM value to type expected by format.
* elflink.c (elf_link_read_relocs_from_section): Use "Lx"
in error messages.
(elf_link_add_object_symbols): Use "Lu" for symbol sizes.
(elf_link_input_bfd): Use "Lx" for r_info.
(bfd_elf_gc_record_vtinherit): Use "Lx" for offset.
long long isn't supposed to be used without a configure test, to
support ancient compilers. Probably not terribly important nowadays.
* bfd.c (bfd_scan_vma): Don't use long long unless HAVE_LONG_LONG.
* coff-rs6000.c (FMT20): Handle hosts with 64-bit long and
Microsoft C library variant of long long format specifier.
(PRINT20): Cast value to bfd_uint64_t not long long.
* coffcode.h (coff_print_aux): Use BFD_VMA_FMT.
* coff-x86_64.c (coff_amd64_reloc): Use bfd_uint64_t rather than
long long. Don't cast to bfd_vma.
* elf32-score.c (score3_bfd_getl48): Likewise.
* vms-alpha.c (_bfd_vms_slurp_eisd): Likewise.
This function uses HAVE_LONG_LONG and HAVE_LONG_DOUBLE
* configure.ac: Invoke AC_CHECK_TYPES for long long. Invoke
AC_TYPE_LONG_DOUBLE.
* configure: Regenerate.
* config.in: Regenerate.
The dynrelro introduction wasn't implemented quite right for RISC-V,
as it didn't consider TLS copy relocs.
bfd/ChangeLog
2017-06-29 Andrew Waterman <andrew@sifive.com>
* elfnn-riscv.c (riscv_elf_adjust_dynamic_symbol): Fix TLS copy
relocs.
Prevent sparc backend making symbols dynamic unless they are undefined
weak. Use R_SPARC_RELATIVE for the symbols which are not dynamic in PIC.
This patch is tested on sparc64-unknown-linux-gnu, no regressions are
found.
bfd/ChangeLog:
2017-06-29 Egeyar Bagcioglu <egeyar.bagcioglu@oracle.com>
* elfxx-sparc.c (allocate_dynrelocs): Don't make a symbol dynamic
unless it is undefined weak.
* elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Set the flag
relative_reloc to direct non-dynamic symbols to R_SPARC_RELATIVE
relocation.
* elfxx-sparc.c (_bfd_sparc_elf_finish_dynamic_symbol): If symbol
is not dynamic in PIC, abort.
This fix is an adaption of the x86-64 PR ld/21402 fix to AArch64.
After the generic code deciding one symbol is not dynamic, AArch64 backend
only overrides the decision on undefined weak symbols.
bfd/
PR ld/21402
* elfnn-aarch64.c (elfNN_aarch64_allocate_dynrelocs): Only make
undefined weak symbols into dynamic.
(elfNN_aarch64_final_link_relocate): Generate runtime RELATIVE
relocation for non-dynamic symbols.
(elfNN_aarch64_finish_dynamic_symbol): Add sanity check.
There are quite a few duplicated code supporting several GP based
relocation types. They are:
BFD_RELOC_AARCH64_LD64_GOTOFF_LO15
BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC
BFD_RELOC_AARCH64_MOVW_GOTOFF_G1
These relocation types are supposed to be used for large memory model PIC/pic
mode under which we will have an initialized GP register points to the base of
GOT table, then these relocations are supposed to put the distance between GOT
entry and GOT table base address into the related instructions.
So, the parameters required to calculate the relocation should be the same as
BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15 etc, all of them are require the GOT entry
address and GOT table base address to perform the relocation.
This patch has removed those duplicated code when handling above listed
relocation types, grouped them with others as relocation types that are
require GOT table base address during performing relocation, reused the
existed GOT handling code.
The relocation calculation for these types before and after this patch should be
identical.
bfd/
* elfnn-aarch64.c (aarch64_relocation_aginst_gp_p): New function.
(elfNN_aarch64_final_link_relocate): Delete duplicated code for
BFD_RELOC_AARCH64_LD64_GOTOFF_LO15, BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC,
BFD_RELOC_AARCH64_MOVW_GOTOFF_G1.
* elfxx-aarch64.c (_bfd_aarch64_elf_resolve_relocation): Optimize the
support for them.
Newer Linux kernel versions offer two new register sets in support of the
z/Architecture's guarded storage facility: NT_S390_GS_CB, the
"guarded-storage registers", and NT_S390_GS_BC, the "guarded-storage
broadcast control block". This patch adds support for the respective core
notes sections to binutils.
bfd/ChangeLog:
* elf-bfd.h (elfcore_write_s390_gs_cb): Add prototype.
(elfcore_write_s390_gs_bc): Likewise.
* elf.c (elfcore_grok_s390_gs_cb): New function.
(elfcore_grok_s390_gs_bc): New function.
(elfcore_grok_note): Call them.
(elfcore_write_s390_gs_cb): New function.
(elfcore_write_s390_gs_bc): New function.
(elfcore_write_register_note): Call them.
binutils/ChangeLog:
* readelf.c (get_note_type): Add NT_S390_GS_CB and NT_S390_GS_BC.
include/ChangeLog:
* elf/common.h (NT_S390_GS_CB): New macro.
(NT_S390_GS_BC): Likewise.
Since it is impossible to read beyond the end of normal files, we only
need to check archive element size in _bfd_generic_get_section_contents
* libbfd.c (_bfd_generic_get_section_contents): Don't call
bfd_get_file_size. Check archive element size.
(_bfd_generic_get_section_contents_in_window): Likewise.
bfd_get_size and bfd_get_file_size should return the unsigned file
size. Otherwise they return negative values for file >= 2GB with
32-bit ufile_ptr.
bfd/
* bfd-in2.h: Regenerated.
* bfdio.c (bfd_get_size): Change return type to ufile_ptr.
(bfd_get_file_size): Likewise.
binutils/
* objdump.c (dump_relocs_in_section): Cast to ufile_ptr when
comparing against bfd_get_file_size return.
Add support for the Imagination interAptiv MR2 MIPS32r3 processor with
the MIPS16e2 ASE as per documentation, including in particular:
1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW
MIPS16e2 instructions[1], for assembly and disassembly,
2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE
regular MIPS instructions[2], for assembly and disassembly,
3. ELF binary file annotation for the interAptiv MR2 MIPS architecture
extension.
4. Support for interAptiv MR2 architecture selection for assembly, in
the form of the `-march=interaptiv-mr2' command-line option and its
corresponding `arch=interaptiv-mr2' setting for the `.set' and
`.module' pseudo-ops.
5. Support for interAptiv MR2 architecture selection for disassembly,
in the form of the `mips:interaptiv-mr2' target architecture, for
use e.g. with the `-m' command-line option for `objdump'.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 interAptiv Multiprocessing System Software User's Manual",
Imagination Technologies Ltd., Document Number: MD00904, Revision
02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific
Instructions", pp. 878-883
[2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917
include/
* elf/mips.h (E_MIPS_MACH_IAMR2): New macro.
(AFL_EXT_INTERAPTIV_MR2): Likewise.
* opcode/mips.h: Document new operand codes defined.
(INSN_INTERAPTIV_MR2): New macro.
(INSN_CHIP_MASK): Adjust accordingly.
(CPU_INTERAPTIV_MR2): New macro.
(cpu_is_member) <CPU_INTERAPTIV_MR2>: New case.
(MIPS16_ALL_ARGS): Rename to...
(MIPS_SVRS_ALL_ARGS): ... this.
(MIPS16_ALL_STATICS): Rename to...
(MIPS_SVRS_ALL_STATICS): ... this.
bfd/
* archures.c (bfd_mach_mips_interaptiv_mr2): New macro.
* cpu-mips.c (I_interaptiv_mr2): New enum value.
(arch_info_struct): Add "mips:interaptiv-mr2" entry.
* elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New
case.
(mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
(mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and
`bfd_mach_mips_interaptiv_mr2' entries.
* bfd-in2.h: Regenerate.
opcodes/
* mips-formats.h (INT_BIAS): New macro.
(INT_ADJ): Redefine in INT_BIAS terms.
* mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry.
(mips_print_save_restore): New function.
(print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment.
(validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort'
call.
(print_insn_args): Handle OP_SAVE_RESTORE_LIST.
(print_mips16_insn_arg): Call `mips_print_save_restore' for
OP_SAVE_RESTORE_LIST handling, factored out from here.
* mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case.
(RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros.
(mips_builtin_opcodes): Add "restore" and "save" entries.
* mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases.
(IAMR2): New macro.
(mips16_opcodes): Add "copyw" and "ucopyw" entries.
binutils/
* readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
* NEWS: Mention Imagination interAptiv MR2 processor support.
gas/
* config/tc-mips.c (validate_mips_insn): Handle
OP_SAVE_RESTORE_LIST specially.
(mips_encode_save_restore, mips16_encode_save_restore): New
functions.
(match_save_restore_list_operand): Factor out SAVE/RESTORE
operand insertion into the instruction word or halfword to these
new functions.
(mips_cpu_info_table): Add "interaptiv-mr2" entry.
* doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the
`-march=' argument list.
Fix incorrect adjustment of diff relocs when relaxing, and thus the
resulting source line to address mismatch.
Fix two issues when adjusting diff relocs to account for
deleted bytes.
1. Don't adjust the difference if the end address is the shrinked
insn's address i.e. use < instead of <=. The relaxation code deletes
count bytes from or after shrinked_insn_address, so the difference
between start_address and end_address should remain unchanged in this
case.
2. Adjust the reloc addend if the difference is to be adjusted and
symval + reloc addend is past the shrinked insn address. This is
because for a typical sym1 - sym2 diff reloc, sym1 is .text +
irel->r_addend, and the addend should be reduced to account for the
shrinked insn.
For example, assume the reloc value is .text + 0x8 with .text = 0, the
diff value in the object file = 0x4, and shrinked_insn_address = 0x4
with count = 0x2. Then the existing code writes 0x2 into the object
file to account for the deleted bytes, as shrinked_insn_address lies
between 0x8 and 0x8 - 0x4 = 0x4, but leaves the addend as is. The next
time the reloc is looked at, the code sees if a shrinked_insn_address
lies between 0x8 and 0x8 - 0x2 = 0x6, instead of 0x6 and 0x4. If there
happens to be one, then the diff value in the object file ends up
getting reduced again.
bfd/
2017-06-27 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
PR ld/13402
* elf32-avr.c (elf32_avr_adjust_diff_reloc_value): Adjust
reloc addend if necessary. Adjust diff only if
shrinked_insn_address < end_address.
ld/
2017-06-27 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
PR ld/13402
* testsuite/ld-avr/pr13402.d: New test.
* testsuite/ld-avr/pr13402.s: New test.
The symbol address in .eh_frame may be adjusted in
_bfd_elf_discard_section_eh_frame, and the content of .eh_frame will be
adjusted in _bfd_elf_write_section_eh_frame. Therefore, we cannot insert
a relocation whose addend symbol is in .eh_frame. Othrewise, the value
may be adjusted twice.
bfd/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* elfnn-riscv.c (perform_relocation): Support the new
R_RISCV_32_PCREL relocation.
(riscv_elf_relocate_section): Likewise.
* elfxx-riscv.c (howto_table): Likewise.
(riscv_reloc_map): Likewise.
* bfd-in2.h (BFD_RELOC_RISCV_32_PCREL): New relocation.
* libbfd.h: Regenerate.
gas/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* config/tc-riscv.c (md_apply_fix) [BFD_RELOC_32]: Convert to a
R_RISCV_32_PCREL relocation.
include/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* elf/riscv.h (R_RISCV_32_PCREL): New.
Make BFD agree with GAS and mark the LSI MiniRISC CW4010 processor core
(for an odd reason referred to as LSI R4010 across our code base) as a
MIPS II processor in BFD as well, fixing a bug that has been there since
forever and addressing linker warnings like:
$ as -m4010 empty.s -o 4010.o
$ ld -r 4010.o -o 4010-r.o
ld: 4010.o: warning: Inconsistent ISA between e_flags and .MIPS.abiflags
$
due to the ISA level being recorded as MIPS III in ELF file header's
`e_flags' vs MIPS II in the MIPS ABI Flags section:
$ readelf -Ah 4010.o
ELF Header:
Magic: 7f 45 4c 46 01 02 01 00 00 00 00 00 00 00 00 00
Class: ELF32
Data: 2's complement, big endian
Version: 1 (current)
OS/ABI: UNIX - System V
ABI Version: 0
Type: REL (Relocatable file)
Machine: MIPS R3000
Version: 0x1
Entry point address: 0x0
Start of program headers: 0 (bytes into file)
Start of section headers: 348 (bytes into file)
Flags: 0x20821000, 4010, o32, mips3
Size of this header: 52 (bytes)
Size of program headers: 0 (bytes)
Number of program headers: 0
Size of section headers: 40 (bytes)
Number of section headers: 11
Section header string table index: 10
Attribute Section: gnu
File Attributes
Tag_GNU_MIPS_ABI_FP: Hard float (double precision)
MIPS ABI Flags Version: 0
ISA: MIPS2
GPR size: 32
CPR1 size: 32
CPR2 size: 0
FP ABI: Hard float (double precision)
ISA Extension: LSI R4010
ASEs:
None
FLAGS 1: 00000000
FLAGS 2: 00000000
$
Available documentation[1][2] clearly indicates the LSI CW4010 processor
is only backwards compatible with the MIPS R4000 processor as far as the
latter's 32-bit instructions are concerned and consequently can only be
considered a MIPS II ISA implementation (with vendor extensions).
This fixes an LD testsuite failure:
FAIL: MIPS incompatible objects: "-march=r4010 -32" "-march=r4650 -32"
triggered for the `mips-sgi-irix5' and `mips-sgi-irix6' targets.
References:
[1] Paul Cobb, Bob Caulk, Joe Cesana, "The MiniRISC CW4010: A
Superscalar MIPS Processor ASIC Core", LSI Logic, July 1995,
presented at Hot Chips VII, Stanford University, Stanford,
California, August 1995
[2] "MiniRISC MR4010 Superscalar Microprocessor Reference Device", LSI
Logic, November 1996, Doc. No. DB09-000028-00, Order No. C15017
bfd/
* cpu-mips.c (arch_info_struct): Mark the 4010 32-bit.
* elfxx-mips.c (mips_set_isa_flags) <bfd_mach_mips4010>: Set
E_MIPS_ARCH_2 rather than E_MIPS_ARCH_3 in `e_flags'.
(mips_mach_extensions): Mark `bfd_mach_mips4010' as extending
`bfd_mach_mips6000' rather than `bfd_mach_mips4000'.
ld/
* testsuite/ld-mips-elf/lsi-4010-isa.d: New test.
* ld/testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
