The instruction encoding for the MIPS r6 sigrie instruction seems to be
incorrect. It's currently 0x4170xxxx (which overlaps with ei, di, evp,
and dvp), but should be 0x0417xxxx. See ISA reference[1][2].
References:
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies, Inc., Document
Number: MD00086, Revision 6.06, December 15, 2016, Table A.4 "MIPS32
REGIMM Encoding of rt Field", p. 452
[2] "MIPS Architecture For Programmers Volume II-A: The MIPS64
Instruction Set Reference Manual", Imagination Technologies, Inc.,
Document Number: MD00087, Revision 6.06, December 15, 2016, Table
A.4 "MIPS64 REGIMM Encoding of rt Field", p. 581
opcodes/
* mips-opc.c (mips_builtin_opcodes): Correct "sigrie" encoding.
gas/
* testsuite/gas/mips/r6.d: Update for "sigrie" encoding fix.
* testsuite/gas/mips/r6-n32.d: Likewise.
* testsuite/gas/mips/r6-n64.d: Likewise.
Checks for insn alignment were hopelessly confused when misaligned
data starts a new frag. The real-world testcase happened to run out
of frag space in the middle of emitting a trace-back table via
something like:
.byte 0 /* VERSION=0 */
.byte 9 /* LANG=C++ */
.byte 34 /* Bits on: has_tboff, fp_present */
.byte 64 /* Bits on: name_present */
.byte 128 /* Bits on: stores_bc, FP_SAVED=0 */
.byte 0 /* Bits on: GP_SAVED=0 */
.byte 2 /* FIXEDPARMS=2 */
.byte 1 /* FLOATPARMS=0, parmsonstk */
.long 0
.long 768 /* tb_offset: 0x300 */
.hword 45 /* Function name length: 45 */
.long 0x334e5a5f
.long 0x31766f70
.long 0x65744932
.long 0x69746172
.long 0x7a5f6e6f
.long 0x64504533
.long 0x5f534e50
.long 0x72463431
.long 0x61746361
.long 0x74535f6c
.long 0x74637572
.byte 0x45
.byte 0
The trigger being those misaligned .long's output for the function
name. A most horrible way to output a string, especially considering
endian issues..
PR 22819
* config/tc-ppc.c (md_assemble): Rewrite insn alignment checking.
(ppc_frag_check): Likewise.
* testsuite/gas/ppc/misalign.d,
* testsuite/gas/ppc/misalign.l,
* testsuite/gas/ppc/misalign.s: New test.
* testsuite/gas/ppc/misalign2.d,
* testsuite/gas/ppc/misalign2.s: New test.
* testsuite/gas/ppc/ppc.exp: Run them.
Correct a commit f0531ed6a4 ("Compress loads/stores with implicit 0
offset.") regression and remove a `-Wshadow' compilation error:
cc1: warnings being treated as errors
.../gas/config/tc-riscv.c: In function 'riscv_handle_implicit_zero_offset':
.../gas/config/tc-riscv.c:1194: error: declaration of 'expr' shadows a global declaration
.../gas/expr.h:180: error: shadowed declaration is here
make[4]: *** [tc-riscv.o] Error 1
which for versions of GCC before 4.8 prevents GAS for RISC-V targets
from being built. See also GCC PR c/53066.
gas/
* config/tc-riscv.c (riscv_handle_implicit_zero_offset): Rename
`expr' parameter to `ep'.
Report an error when an unsupported `.reginfo' section size is found in
`_bfd_mips_elf_section_processing', removing an assertion that triggers
at elfxx-mips.c:7105 in GAS when assembling input like:
.section .reginfo
.word 0xdeadbeef
and in `objcopy --rename-section' when renaming an incorrectly sized
section to `.reginfo'.
bfd/
* elfxx-mips.c (_bfd_mips_elf_section_processing): For
SHT_MIPS_REGINFO sections don't assert the correct size and
report an error instead.
binutils/
* testsuite/binutils-all/mips/mips-reginfo.d: New test.
* testsuite/binutils-all/mips/mips-reginfo-n32.d: New test.
* testsuite/binutils-all/mips/mips-reginfo.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* testsuite/gas/mips/reginfo-2.d: New test.
* testsuite/gas/mips/reginfo-2-n32.d: New test.
* testsuite/gas/mips/reginfo-2.l: New test stderr output.
* testsuite/gas/mips/reginfo-2.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
The PR22714 testcase is such that the input buffer processed by
do_scrub_chars ends on this line
1: bug "Returning to usermode but unexpected PSR bits set?", \@
right at the backslash. (The line is part of a macro definition.)
The next input buffer then starts with '@' which starts a comment on
ARM, and the check for \@ fails due to to == tostart. Now it would be
possible to simply access to[-1] in this particular case, but that's
ugly, and to be absolutely safe from people deliberately trying to
crash gas we'd need the read.c:read_a_source_file buffer passed to
do_scrub_chars to have a single byte pad at the start.
PR 22714
* app.c (last_char): New static var.
(struct app_save): Add last_char field.
(app_push, app_pop): Handle it.
(do_scrub_chars): Use last_char in test for "\@". Set last_char.
The .dc.a directive has wrong size (32 bits) on SPARC 64-bit because
the assembler sets the correct BFD architecture only at the very end
of the processing and it's too late for the directive. It's fixed by
defining TARGET_MACH and making it return a sensible default value.
gas/
* config/tc-sparc.h (sparc_mach): Declare.
(TARGET_MACH): Define to above.
* config/tc-sparc.c (sparc_mach): New function.
(sparc_md_end): Minor tweak.
ld/
* testsuite/ld-elf/pr22450.d: Remove reference to SPARC64.
Fix a commit 0a44bf6950 ("mips-vxworks support"),
<https://sourceware.org/ml/binutils/2006-03/msg00179.html>, regression
and override the choice of the `vxworks' target environment introduced
with commit ea3eed1500 ("Add generic vxworks GAS target."),
<https://sourceware.org/ml/binutils/2005-01/msg00052.html>, for
`mips-*-windiss' targets as they have not been converted to the VxWorks
target format introduced with the former commit, removing a GAS target
format selection failure:
Assembler messages:
Fatal error: selected target format 'elf32-bigmips-vxworks' unknown
on any assembly attempt with `mips-windiss' and equivalent target
configurations.
gas/
* configure.tgt: Use generic emulation for `mips-*-windiss',
overriding the blanket choice made for `*-*-windiss'.
Use `mips-*-sysv4*' rather than `mips-*-sysv4*MP*' to match the system
type for System V Release 4 MIPS targets, removing a GAS target
selection failure:
Assembler messages:
Fatal error: selected target format 'elf32-bigmips' unknown
on any assembly attempt with `mips-sysv4' and equivalent target
configurations. These would typically be called `mips-sni-sysv4'
(Sinix) vs `mips-dde-sysv4.2MP' (Supermax).
This corrects commit 8614eeee67 ("Traditional MIPS patches"),
<https://sourceware.org/ml/binutils/2000-07/msg00018.html>, making GAS
target selection match commit dd745cfae5 ("Traditional MIPS patches"),
<https://sourceware.org/ml/binutils/2000-07/msg00018.html>, and commit
3548145dcb ("Traditional MIPS patches"),
<https://sourceware.org/ml/binutils/2000-07/msg00018.html>, which added
support for these targets to BFD and LD respectively.
gas/
* configure.tgt: Use `mips-*-sysv4*' rather than
`mips-*-sysv4*MP*'.
Correct an issue with the `mips64*-ps2-elf*' target introduced with
commit e407c74b5b ("Support for MIPS R5900 (Sony Playstation 2)"),
<https://sourceware.org/ml/binutils/2012-12/msg00240.html> and make
the n32 ABI the default for GAS, consistently with how BFD and LD
are configured for this target.
gas/
* configure.ac: Also set `mips_default_abi' to N32_ABI for
`mips64*-ps2-elf*'.
* configure: Regenerate.
Remove an issue with `as --help' always reporting `o32' as the default
ABI regardless of what the default actually is, originally caused by
commit cac012d6d3 ("check mips abi x linker emulation compatibility"),
<https://sourceware.org/ml/binutils/2003-05/msg00187.html> missing an
update here.
gas/
* config/tc-mips.c (md_show_usage): Correctly indicate the
configuration-specific default ABI.
Correct a commit 25499ac7ee ("MIPS16e2: Add MIPS16e2 ASE support") GAS
bug and add missing help text for the `-mmips16e2' and `-mno-mips16e2'
options added with said commit.
gas/
* config/tc-mips.c (md_show_usage): Report `-mmips16e2' and
`-mno-mips16e2' options.
Remove spurious comments after the definition of ToC and ToU.
2018-01-19 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (ToC macro): Remove spurious comment.
(ToU macro): Likewise.
gas/
* testsuite/gas/riscv/c-zero-imm.s: Test addi that compresses to c.nop.
* testsuite/gas/riscv/c-zero-imm.d: Likewise.
opcodes/
* riscv-opc.c (match_c_nop): New.
(riscv_opcodes) <addi>: Handle an addi that compresses to c.nop.
Armv8-M Security Extensions introduced some Thumb-only opcodes
(eg. sg). These are defined using the TUE and TCE macros, setting the
Arm execution state related fields to 0/NULL.
This patch adds 2 new macros to avoid filling this field and clearly
identify Thumb-only instructions.
2018-01-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (ToC): Define macro.
(ToU): Likewise.
(insns): Make use of above macros for new instructions introduced in
Armv8-M.
Newly introduced instructions common to ARMv8-M Baseline and Mainline
are currently all marked as unconditional. However, all instructions but
sg (ie. blxns, bxns, tt, ttt, tta, ttat, vlldm and vlstm) do actually
support conditional execution. This patch fixes the definition of these
instructions accordingly.
2018-01-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (insns): Make blxns, bxns, tt, ttt, tta, ttat, vlldm
and vlstm conditionally executable and reindent parameters.
* testsuite/gas/arm/archv8m-cmse-main.s: Add conditional version of
aforementionned instructions.
Deprecations related to the use of the IT instruction introduced in
Armv8-A do not apply to Armv8-M Baseline and mainline. However the
warning logic do not distinguish between the various profiles and warn
whenever the architecture version is 8.
This patch adds a check to exclude M profile architectures from this
warning. This works as expected when -march is specified on the
command-line or a .arch/.cpu directive exist. However, in autodetection
mode the CPU/architecture targeted is only known once the instructions
have been all processed but this code is run when IT instruction is
processed. It is therefore not possible to distinguish between Armv8-M
and Armv8-A in that mode.
The approach chosen here is not to warn in autodetection mode. The udf.d
testcase that relied on that behavior to test deprecation warning for
Armv8-A is therefore updated to explicitely pass -march=armv8-a.
2018-01-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (it_fsm_post_encode): Do not warn if targeting M
profile architecture or if in autodetection mode. Clarify that
deprecation is for performance reason and concerns Armv8-A and Armv8-R.
* testsuite/gas/arm/armv8-ar-bad.l: Adapt to new IT deprecation warning
message.
* testsuite/gas/arm/armv8-ar-it-bad.l: Likewise.
* testsuite/gas/arm/sp-pc-validations-bad-t-v8a.l: Likewise.
* testsuite/gas/arm/udf.l: Likewise.
* testsuite/gas/arm/udf.d: Assemble for Armv8-A explicitely.
Occasionally I build an out-of-tree a.out target (m68k-amigaos). After
a system upgrade which included a newer compiler (clang 4) the build
produces warnings like this:
warning: macro expansion producing 'defined' has undefined behavior
[-Wexpansion-to-defined]
This is caused by the macro gas/config/aout_gnu.h:USE_EXTENDED_RELOC.
Since it is in a header file, the warning triggers for several files.
I am unsure what solution is preferable, thus I am suggesting two
patches:
a) keep the offending macro but define it explicitly to 0 and 1
b) replace the macro usage with its value where it is used.
Either patch removes the warning for clang. I did not check with a
recent GCC.
* gas/config/aout_gnu.h (USE_EXTENDED_RELOC): Explicitly
define to 0 and 1. Remove a dangling reference to "AMD 29000"
in a comment.
Just like their packed counterparts the memory operand is always 16
bytes wide, and the Disp8 scaling is the same for all of them. (As a
side note: I'm also surprised by there being AVX512VL variants of
these as well as the AVX512_4VNNIW ones - the SDM doesn't define any
such.)
Adjust the test cases also for the packed forms to actually live up to
their promise of testing correct Disp8 encoding.
gas/
* testsuite/gas/riscv/auipc-x0.d: New.
* testsuite/gas/riscv/auipc-x0.s: New.
opcodes/
* riscv-dis.c (maybe_print_address): If base_reg is zero,
then the hi_addr value is zero.
CSDB is a new instruction which Arm has defined. As it shares the
encoding space with NOP instructions, it is available from Armv3 in
Arm mode, and Armv6T2 in Thumb mode.
OK? If so, please commit on my behalf as I don't have commit rights
over here.
Thanks, James
---
opcodes/
2018-01-09 James Greenhalgh <james.greenhalgh@arm.com>
* arm-dis.c (arm_opcodes): Add csdb.
(thumb32_opcodes): Add csdb.
gas/
2018-01-09 James Greenhalgh <james.greenhalgh@arm.com>
* config/tc-arm.c (insns): Add csdb, enable for Armv3 and above
in Arm execution state, and Armv6T2 and above in Thumb execution
state.
* testsuite/gas/arm/csdb.s: New.
* testsuite/gas/arm/csdb.d: New.
* testsuite/gas/arm/thumb2_it_bad.l: Add csdb.
* testsuite/gas/arm/thumb2_it_bad.s: Add csdb.
CSDB is a new instruction which Arm has defined. It has the same encoding as
HINT #0x14 and is available at all architecture levels.
opcodes * aarch64-tbl.h (aarch64_opcode_table): Add "csdb".
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
gas * testsuite/gas/aarch64/system.d: Update expected results to expect
CSDB.
For historical reason, we allow movd/vmovd with 64-bit register and
memeory operands. But for vmovd, we failed to handle 64-bit memeory
operand. This has been gone unnoticed since AT&T syntax always treats
memory operand as 32-bit memory. This patch properly encodes vmovd
with 64-bit memeory operands. It also removes AVX512 vmovd with 64-bit
operands since GCC has
case TYPE_SSEMOV:
switch (get_attr_mode (insn))
{
case MODE_DI:
/* Handle broken assemblers that require movd instead of movq. */
if (!HAVE_AS_IX86_INTERUNIT_MOVQ
&& (GENERAL_REG_P (operands[0]) || GENERAL_REG_P (operands[1])))
return "%vmovd\t{%1, %0|%0, %1}";
return "%vmovq\t{%1, %0|%0, %1}";
and all AVX512 GNU assemblers set HAVE_AS_IX86_INTERUNIT_MOVQ, GCC won't
generate AVX512 vmovd with 64-bit operand.
gas/
PR gas/22681
* testsuite/gas/i386/i386.exp: Run x86-64-movd and
x86-64-movd-intel.
* testsuite/gas/i386/x86-64-movd-intel.d: New file.
* testsuite/gas/i386/x86-64-movd.d: Likewise.
* testsuite/gas/i386/x86-64-movd.s: Likewise.
opcodes/
PR gas/22681
* i386-opc.tbl: Properly encode vmovd with Qword memeory operand.
Remove AVX512 vmovd with 64-bit operands.
* i386-tbl.h: Regenerated.
gas/
* testsuite/gas/riscv/priv-reg.s: Add missing stval and mtval.
* testsuite/gas/riscv/priv-reg.d: Likewise.
include/
* opcode/riscv-opc.h (CSR_SBADADDR): Rename to CSR_STVAL. Rename
DECLARE_CSR entry. Add alias to map sbadaddr to CSR_STVAL.
(CSR_MBADADDR): Rename to CSR_MTVAL. Rename DECLARE_CSR entry.
Add alias to map mbadaddr to CSR_MTVAL.
Dot products deviate from the normal disassembly rules for lane indexed
instruction. Their canonical representation is in the form of:
v0.2s, v0.8b, v0.4b[0] instead of v0.2s, v0.8b, v0.b[0] to try to denote
that these instructions select 4x 1 byte elements instead of a single 1 byte
element.
Previously we were disassembling them following the normal rules, this patch
corrects the disassembly.
gas/
PR gas/22559
* config/tc-aarch64.c (vectype_to_qualifier): Support AARCH64_OPND_QLF_S_4B.
* gas/testsuite/gas/aarch64/dotproduct.d: Update disassembly.
include/
PR gas/22559
* aarch64.h (aarch64_opnd_qualifier): Add AARCH64_OPND_QLF_S_4B.
opcodes/
PR gas/22559
* aarch64-asm.c (aarch64_ins_reglane): Change AARCH64_OPND_QLF_S_B to
AARCH64_OPND_QLF_S_4B
* aarch64-dis.c (aarch64_ext_reglane): Change AARCH64_OPND_QLF_S_B to
AARCH64_OPND_QLF_S_4B
* aarch64-opc.c (aarch64_opnd_qualifiers): Add 4b variant.
* aarch64-tbl.h (QL_V2DOT): Change S_B to S_4B.
