cli_set_logging is declared but not defined. It's probably a leftover
from whenever interpreters were changed to use inheritance. This
patch removes the declaration. Tested by grep and rebuilding.
I noticed a few spots that were explicitly creating new references to
Py_True or Py_False. It's simpler here to use PyBool_FromLong, so
this patch changes all the places I found.
save_res stubs aren't written in ppc_build_one_stub, their offsets
(which are zero) should not be checked.
* elf64-ppc.c (ppc_build_one_stub): Don't check save_res offsets.
Let's show the current stub as well as the previous one. Of interest
is the current offset and a new field, id. Check that the build
hash table traversal is in the same order as sizing traversal too.
* elf64-ppc.c (struct ppc_stub_hash_entry): Add id.
(struct ppc_link_hash_table): Add stub_id.
(stub_hash_newfunc): Init id and symtype.
(dump_stub): New function, extracted from..
(dump_previous_stub): ..here. Deleted.
(ppc_build_one_stub): Sanity check stub id as well as offset.
Show current stub as well as previous.
(ppc_size_one_stub): Set stub id.
(ppc64_elf_size_stubs): Init stub_id before traversal.
(ppc64_elf_build_stubs): Likewise.
__attribute__((visibility("protected"))) void *foo() {
return (void *)foo;
}
gcc -fpic -shared -fuse-ld=bfd fails with the confusing diagnostic:
relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `foo' which may bind externally can not be used when making a shared object; recompile with -fPIC
Call _bfd_elf_symbol_refs_local_p with local_protected==true to suppress
the error. The new behavior matches gold and ld.lld.
Note: if some code tries to use direct access relocations to take the
address of foo (likely due to -fno-pic), the pointer equality will
break, but the error should be reported on the executable link, not on
the innocent shared object link. glibc 2.36 will give a warning at
relocation resolving time.
Follow-up to commit 90b7a5df15
("aarch64: Disallow copy relocations on protected data").
Commit 32f573bcb3 changed ld to produce
R_AARCH64_GLOB_DAT but that defeated the purpose of protected visibility
as an optimization. Restore the previous behavior (which matches
ld.lld) by defining elf_backend_extern_protected_data to 0.
I noticed that touching interps.h caused a lot of recompilation. I
tracked this down to mi-common.h including this file. This patch
moves the MI interpreter to mi-interp.h, which cuts down on
recompilation when modifying interps.h.
This changes interp::m_name to be a unique_xmalloc_ptr, removing some
manual memory management. It also cleans up the initialization of the
'inited' member, and moves the 'private:' and 'public:' keywords to
their proper spots.
If an executable has copy relocations for extern protected data, that
can only work if the shared object containing the definition is built
with assumptions (a) the compiler emits GOT-generating relocations (b)
the linker produces R_*_GLOB_DAT instead of R_*_RELATIVE. Otherwise the
shared object uses its own definition directly and the executable
accesses a stale copy. Note: the GOT relocations defeat the purpose of
protected visibility as an optimization, and it turns out this never
worked perfectly.
glibc 2.36 will warn on copy relocations on protected data. Let's
produce a warning at link time, matching ld.lld which has been used on
many aarch64 OSes.
Note: x86 requires GNU_PROPERTY_NO_COPY_ON_PROTECTED to have the error.
This is to largely due to GCC 5's "x86-64: Optimize access to globals in
PIE with copy reloc" which started to use direct access relocations for
external data symbols in -fpie mode.
GCC's aarch64 port does not have the change. Nowadays with most builds
switching to -fpie/-fpic, aarch64 mostly doesn't need to worry about
copy relocations. So for aarch64 we simply don't check
GNU_PROPERTY_NO_COPY_ON_PROTECTED.
* dwarf.c (fetch_indexed_string): Added new parameter
str_offsets_base to calculate the string offset.
(read_and_display_attr_value): Read DW_AT_str_offsets_base
attribute.
(process_debug_info): While allocating memory and initializing
debug_information, do it for do_debug_info also, if its true.
(load_separate_debug_files): Load .debug_str_offsets if exists.
* dwarf.h (struct debug_info): Add str_offsets_base field.
This patch has been pending for almost a year... However, I noticed that
llvm can already re-order the extensions, even if they are out of orders.
Not really sure if they can also re-order the single letter extensions,
but at least we can do this for the multi-letter extensions in binutils.
bfd/
* elfxx-riscv.c (riscv_parse_prefixed_ext): Removed the code which are
used to check the prefixed extension orders.
gas/
* testsuite/gas/riscv/march-fail-order-x-z.d: Removed since we will help
tp reorder the prefixed extensions for now.
* testsuite/gas/riscv/march-fail-order-x-z.l: Likewise.
* testsuite/gas/riscv/march-fail-order-x.d: Likewise.
* testsuite/gas/riscv/march-fail-order-x.l: Likewise.
* testsuite/gas/riscv/march-fail-order-z.d: Likewise.
* testsuite/gas/riscv/march-fail-order-z.l: Likewise.
According to the picture 28.1 in the current ISA spec, h is no larger the
multi-letter extension, it is a single extension after v. Therefore, this
patch fix the implementation, and use the single h to control hypervisor
CSRs and instructions, which we promised to do before.
bfd/
* elfxx-riscv.c (riscv_supported_std_ext): Added h with version 1.0 after v.
(riscv_supported_std_h_ext): Removed.
(riscv_all_supported_ext): Updated since riscv_supported_std_h_ext is removed.
(riscv_prefix_ext_class): Removed RV_ISA_CLASS_H.
(parse_config): Updated since riscv_prefix_ext_class is removed.
(riscv_recognized_prefixed_ext): Likewise.
(riscv_get_default_ext_version): Likewise.
(riscv_multi_subset_supports): Handle INSN_CLASS_H for hypervisor instructions.
(riscv_multi_subset_supports_ext): Likewise.
gas/
* config/tc-riscv.c (riscv_csr_class): Added CSR_CLASS_H and CSR_CLASS_H_32 for
hypervisor CSRs.
(riscv_csr_address): Likewise.
* testsuite/gas/riscv/csr-version-1p10.d: Updated since hypervisor CSRs are
controlled by single h extension for now.
* testsuite/gas/riscv/csr-version-1p10.l: Likewise.
* testsuite/gas/riscv/csr-version-1p11.d: Likewise.
* testsuite/gas/riscv/csr-version-1p11.l: Likewise.
* testsuite/gas/riscv/csr-version-1p12.d: Likewise.
* testsuite/gas/riscv/csr-version-1p12.l: Likewise.
* testsuite/gas/riscv/csr-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/csr-version-1p9p1.l: Likewise.
* testsuite/gas/riscv/h-ext-32.d: Added h to architecture string.
* testsuite/gas/riscv/h-ext-64.d: Likewise.
* testsuite/gas/riscv/march-fail-single-prefix-h: Removed since h is no
longer multi-letter extension.
* testsuite/gas/riscv/march-fail-unknown-h.d: Likewise.
include/
* opcode/riscv-opc.h: Control hypervisor CSRs by h extension, rather than
the privileged spec verisons.
* opcode/riscv.h (riscv_insn_class): Added INSN_CLASS_H.
opcodes/
* riscv-opc.c (riscv_opcodes): Control hypervisor instructions by h extension.
This commit adds 'H' to canonical extension ordering based on current
consensus (not officially ratified as a new ISA specification manual
but discussion for software compatibility is made).
bfd/ChangeLog
* elfxx-riscv.c (riscv_ext_canonical_order): Add 'H' for
canonical extension ordering based on current consensus.
Some strings returned by the riscv_multi_subset_supports_ext function
contain not just extension names but words like "and" and "or".
This commit wraps such strings with the gettext macro (_) for
internationalization in the future.
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports_ext): Wrap some
strings with the gettext macro to prepare future i18n.
This commit fixes inconsistent error message format involving compressed
funct<n> fields. In specific, funct6 had an error message with range
0..2^<n> ("0..64") unlike other funct<n> fields with 0..2^<n>-1
(e.g. funct4 with "0..15").
gas/ChangeLog:
* config/tc-riscv.c (riscv_ip): Fix inconsistent error message.
Using xmalloc makes the null check redundant since failing allocation
will exit the program. Instead use malloc and let the error be
conveyed up the call chain.
powerpc64le-linux-ld is failing the assertion in ppc_build_one_stub,
again apparently, which means a stub will overwrite the tail of a
previous stub. The difficulty with debugging these issues is that
it's not a problem with the stub that triggers the assertion, but the
previous stub in that section. This patch keeps track of the last
stub and adds a debug dump. Hopefully that will help.
* elf64-ppc.c (enum _ppc64_sec_type): Add sec_stub.
(struct _ppc64_elf_section_data): Add u.last_ent.
(dump_previous_stub): New function.
(ppc_build_one_stub): Keep track of previous stub, and dump it
when finding an overlapping stub.
We were failing to call prune_warnings appropriately, leading to
false-positive test failures on some platforms (observed on
sparclinux).
libctf/ChangeLog:
* testsuite/lib/ctf-lib.exp: Prune warnings from compiler and
linker output.
* testsuite/libctf-regression/libctf-repeat-cu.exp: Likewise,
and ar output too.
A missing paren led to an intended cast to avoid dependence on the size
of size_t in one argument of ctf_err_warn applying to the wrong type by
mistake.
libctf/ChangeLog:
* ctf-serialize.c (ctf_write_mem): Fix cast.
Right now, if you compile the same .c input repeatedly with CTF enabled
and different compilation flags, then arrange to link all of these
together, then things misbehave in various ways. libctf may conflate
either inputs (if the .o files have the same name, say if they are
stored in different .a archives), or per-CU outputs when conflicting
types are found: the latter can lead to entirely spurious errors when
it tries to produce multiple per-CU outputs with the same name
(discarding all but the last, but then looking for types in the earlier
ones which have just been thrown away).
Fixing this is multi-pronged. Both inputs and outputs need to be
differentiated in the hashtables libctf keeps them in: inputs with the
same cuname and filename need to be considered distinct as long as they
have different associated CTF dicts, and per-CU outputs need to be
considered distinct as long as they have different associated input
dicts. Right now there is nothing tying the two together other than the
CU name: fix this by introducing a new field in the ctf_dict_t named
ctf_link_in_out, which (for input dicts) points to the associated per-CU
output dict (if any), and for output dicts points to the associated
input dict. At creation time the name used is completely arbitrary:
it's only important that it be distinct if CTF dicts are distinct. So,
when a clash is found, adjust the CU name by sticking the number of
elements in the input on the end. At output time, the CU name will
appear in the linked object, so it matters a little more that it look
slightly less ugly: in conflicting cases, append an incrementing
integer, starting at 0.
This naming scheme is not very helpful, but it's hard to see what else
we can do. The input .o name may be the same. The input .a name is not
even visible to ctf_link, and even *that* might be the same, because
.a's can contain many members with the same name, all of which
participate in the link. All we really know is that the two have
distinct dictionaries with distinct types in them, and at least this way
they are all represented, any any symbols, variables etc referring to
those types are accurately stored.
(As a side-effect this also fixes a use-after-free and double-free when
errors are found during variable or symbol emission.)
Use the opportunity to prevent a couple of sources of problems, to wit
changing the active CU mappings when a link has already been done
(no effect on ld, which doesn't use CU mappings at all), and causing
multiple consecutive ctf_link's to have the same net effect as just
doing the last one (no effect on ld, which only ever does one
ctf_link) rather than having the links be a sort of half-incremental
not-really-intended mess.
libctf/ChangeLog:
PR libctf/29242
* ctf-impl.h (struct ctf_dict) [ctf_link_in_out]: New.
* ctf-dedup.c (ctf_dedup_emit_type): Set it.
* ctf-link.c (ctf_link_add_ctf_internal): Set the input
CU name uniquely when clashes are found.
(ctf_link_add): Document what repeated additions do.
(ctf_new_per_cu_name): New, come up with a consistent
name for a new per-CU dict.
(ctf_link_deduplicating): Use it.
(ctf_create_per_cu): Use it, and ctf_link_in_out, and set
ctf_link_in_out properly. Don't overwrite per-CU dicts with
per-CU dicts relating to different inputs.
(ctf_link_add_cu_mapping): Prevent per-CU mappings being set up
if we already have per-CU outputs.
(ctf_link_one_variable): Adjust ctf_link_per_cu call.
(ctf_link_deduplicating_one_symtypetab): Likewise.
(ctf_link_empty_outputs): New, delete all the ctf_link_outputs
and blank out ctf_link_in_out on the corresponding inputs.
(ctf_link): Clarify the effect of multiple ctf_link calls.
Empty ctf_link_outputs if it already exists rather than
having the old output leak into the new link. Fix a variable
name.
* testsuite/config/default.exp (AR): Add.
(OBJDUMP): Likewise.
* testsuite/libctf-regression/libctf-repeat-cu.exp: New test.
* testsuite/libctf-regression/libctf-repeat-cu*: Main program,
library, and expected results for the test.
GDB's documentation of the 'file' command says:
If you do not specify a directory and the file is not found in the
GDB working directory, GDB uses the environment variable PATH as a
list of directories to search, just as the shell does when looking
for a program to run.
The same is true for files specified via commandline options -s, -e,
and -se.
This commit adds a cross reference to the file command for these options.
* dwarf.h (struct debug_info): Add rnglists_base field.
* dwarf.c (read_and_display_attr_value): Read attribute DW_AT_rnglists_base.
(display_debug_rnglists_list): While handling DW_RLE_base_addressx,
DW_RLE_startx_endx, DW_RLE_startx_length items, pass the proper parameter
value to fetch_indexed_addr(), i.e. fetch the proper entry in .debug_addr section.
(display_debug_ranges): Add rnglists_base to the .debug_rnglists base address.
(load_separate_debug_files): Load .debug_addr section, if exists.
PR 29263
* configure.ac (ac_default_ld_warn_execstack): Default to 'no' for
HPPA targets.
(ac_default_ld_warn_rwx_segments): Likewise.
* configure: Regenerate.
* testsuite/ld-elf/elf.exp: Add the --warn-execstack command line
option to the command line when running execstack tests for the
HPPA target.
'finish_print' does not really belong in value_print_options -- this
is consulted only when deciding whether or not to print a value, and
never during the course of printing. This patch removes it from the
structure and makes it a static global in infcmd.c instead.
Tested on x86-64 Fedora 34.
PR exp/20630 points out a simple way to cause an assertion failure in
copy_type -- but this was found in the wild a few times as well.
copy_type only works for objfile-owned types, but there isn't a deep
reason for this. This patch fixes the bug by updating copy_type to
work for any sort of type.
Better would perhaps be to finally implement type GC, but I still
haven't attempted this.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=20630
The optimized insertion sort algorithm in `elf_link_adjust_relocs`
incorrectly assembled "runs" from unsorted entries and inserted them to an
already-sorted prefix, breaking the loop invariants of insertion sort.
This commit updates the run assembly loop to break upon encountering a
non-monotonic change in the sort key.
PR 29259
bfd/
* elflink.c (elf_link_adjust_relocs): Ensure run being inserted
is sorted.
ld/
* testsuite/ld-elf/pr29259.d,
* testsuite/ld-elf/pr29259.s,
* testsuite/ld-elf/pr29259.t: New test.
This patch makes it possible to allow Value.format_string() to return
nibbles output.
When we set the parameter of nibbles to True, we can achieve the
displaying binary values in groups of every four bits.
Here's an example:
(gdb) py print (gdb.Value (1230).format_string (format='t', nibbles=True))
0100 1100 1110
(gdb)
Note that the parameter nibbles is only useful if format='t' is also used.
This patch also includes update to the relevant testcase and
documentation.
Tested on x86_64 openSUSE Tumbleweed.
Make an introduction of a new print setting that can be set by 'set
print nibbles [on|off]'. The default value if OFF, which can be changed
by user manually. Of course, 'show print nibbles' is also included in
the patch.
The new feature displays binary values by group, with four bits per
group. The motivation for this work is to enhance the readability of
binary values.
Here's a GDB session before this patch is applied.
(gdb) print var_a
$1 = 1230
(gdb) print/t var_a
$2 = 10011001110
With this patch applied, we can use the new print setting to display the
new form of the binary values.
(gdb) print var_a
$1 = 1230
(gdb) print/t var_a
$2 = 10011001110
(gdb) set print nibbles on
(gdb) print/t var_a
$3 = 0100 1100 1110
Tested on x86_64 openSUSE Tumbleweed.
commit e5ab6af52d ("gdbserver: Add LoongArch/Linux support")
was merged into the master since GDB 12, so we should put the
news in the "Changes since GDB 12" section.
Thanks Tom Tromey for your correction [1], sorry for that.
[1] https://sourceware.org/pipermail/gdb-patches/2022-June/190122.html
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
When handling section names in quotes obj_elf_section_name calls
demand_copy_C_string, which puts the name on the gas notes obstack.
Such strings aren't usually freed, since obstack_free frees all more
recently allocated objects as well as its arg. When handling
non-quoted names, obj_elf_section_name mallocs the name. Due to the
mix of allocation strategies it isn't possible for callers to free
names, if that was desirable. Partially fix this by always creating
names on the obstack, which is more efficient anyway. (You still
can't obstack_free on error paths due to the xtensa
tc_canonicalize_section_name.) Also remove a couple of cases where
the name is dup'd for no good reason as far as I know.
PR 29256
* config/obj-elf.c (obj_elf_section_name): Create name on notes
obstack.
(obj_elf_attach_to_group): Don't strdup group name.
(obj_elf_section): Likewise.
(obj_elf_vendor_attribute): Use xmemdup0 rather than xstrndup.
With gcc 4.8/4.9, we run into this build failure (and other similar
ones):
/home/palves/gdb/binutils-gdb/src/gdb/location.h:224:59: error: could not convert ‘{0, LINE_OFFSET_UNKNOWN}’ from ‘<brace-enclosed initializer list>’ to ‘line_offset’
struct line_offset line_offset = {0, LINE_OFFSET_UNKNOWN};
^
The issue is that at around the GCC 4.8/4.9 era, a default member
initializer prevented the struct from being an aggregate, so you
cannot use aggregate initialization on them. That rule changed after
GCC 4.9 and GCC 5 & later uses new rules.
Fix this by not using aggregate initialization for struct line_offset.
The default member initization already leaves line_offset as {0,
LINE_OFFSET_UNKNOWN}, so initialization to those values can just go
away. The remaining cases are of the form {0, LINE_OFFSET_NONE}, and
those cases can be better rewritten to delay setting the sign field
until we know we have a valid offset.
Change-Id: I0506ea4a83c5fa2f15e159569db68b3b0a7509b4
This converts set_location_spec_string to a method of location_spec,
and makes the location_spec::as_string field protected, renaming it to
m_as_string along the way.
Change-Id: Iccfb1654e9fa7808d0512df89e775f9eacaeb9e0
This converts location_spec_to_string to a method of location_spec,
simplifying the code using it, as it no longer has to use
std::unique_ptr::get().
Change-Id: I621bdad8ea084470a2724163f614578caf8f2dd5
This converts location_spec_empty_p to a method of location_spec,
simplifying users, as they no longer have to use
std::unique_ptr::get().
Change-Id: I83381a729896f12e1c5a1b4d6d4c2eb1eb6582ff
