Commit Graph

85 Commits

Author SHA1 Message Date
Frank Ch. Eigler
f8611801b1 * remote-mips.c (mips_request): Use unsigned long during parsing
returned value from monitor, to prevent accidental sign extension.
1998-02-17 23:14:57 +00:00
Frank Ch. Eigler
a469b84c3b * Changed MIPS monitor interface code to be tolerant of slightly
different IDT/sim 6.0 behavior.  Extra time and laxness is alloted
  for monitor entry and exit.
1998-02-12 21:28:52 +00:00
Mark Alexander
138b5e6359 * remote-mips.c (_initialize_remote_mips): Fix DDB doc string. 1997-12-22 21:55:09 +00:00
Stan Shebs
501ad43a89 Remove sanitized-out Magic Cap support, will never be released 1997-10-06 19:38:43 +00:00
Mark Alexander
794868783d * remote-mips.c (mips-initialize): Work around flakiness in
some versions of PMON after loading a program.
1997-10-05 01:53:22 +00:00
Mark Alexander
f781fe93a6 * infrun.c (wait_for_inferior): Mark registers as invalid when
stepping over an instruction that triggered a watchpoint.
	* remote-mips.c: Numerous changes to support hardware breakpoints
	and watchpoints on LSI MiniRISC and TinyRISC boards.
	* mips-tdep.c: Move MIPS16-related macros to config/mips/tm-mips.h.
	(mips_breakpoint_from_pc): Account for different breakpoint
	instructions used by PMON and IDT monitor.
	* config/mips/tm-embed.h: Enable hardware breakpoints on embedded
	MIPS targets.
	* config/mips/tm-mips.h: Define breakpoint instructions for
	PMON and IDT monitor.  Move MIPS16-related macros here from
	mips-tdep.c.
1997-06-17 02:11:42 +00:00
Mark Alexander
8e7c36868b * remote-mips.c (mips_load): Ensure that PC gets updated
after a load on LSI target.
1997-04-15 00:09:24 +00:00
Mark Alexander
b68b97830b * remote-mips.c: Clean up comment and extraneous semicolon
for mips_monitor_prompt variable.
1997-03-27 22:25:51 +00:00
Mark Alexander
8e493b6178 * remote-mips.c: Add `set monitor-prompt' command. 1997-03-27 22:09:34 +00:00
Bob Manson
db38473ab8 * remote-mips.c (mips_exit_debug): Some IDT boards don't
send the full exit string.

Fixes a bug when trying to load to our mips IDT boards.
1997-03-06 03:36:05 +00:00
Mark Alexander
d6ca85a8ca * remote-mips.c: Put back the form feeds. 1997-02-27 22:14:22 +00:00
Mark Alexander
266454ca50 * remote-mips.c: Remove form feeds (^L) from source.
(mips_initialize): LSI PMON doesn't support 'set regsize' command.
	(pmon_wait): Don't need to exit and re-enter debug mode on LSI
	PMON after a continue; it causes target program misbehavior.
	(mips_fetch_register): Don't fetch unsupported registers; this
	cuts down on wasted serial traffic.
1997-02-27 21:45:29 +00:00
Mark Alexander
7061bb0ef3 * mips-tdep.c (non_heuristic_proc_desc): New function.
(find_proc_desc): Move non-heuristic proc search code into separate
	function.
	(gdb_print_insn_mips): Use non-heuristic method to find procedure
	descriptor, to avoid prologue examination when disassembling.
	* remote-mips.c: Add support for new "lsi" target (LSI MiniRISC
	aka MicroMeteor board).
	(mips_exit_debug): Prevent protocol reinitialization if an error
	occurs while exiting debug mode.
1997-02-11 02:48:55 +00:00
Mark Alexander
32dab60312 * remote-mips.c (common_breakpoint): Prevent 64-bit addresses
from being sent to 32-bit targets by masking off upper bits.
	* mips-tdep.c (heuristic_proc_start): Mask off upper 32 bits
	of PC on 32-bit targets.
	(mips16_heuristic_proc_desc): Recognize 'addiu s1,sp,n' as a
	frame setup instruction.
	(mips32_heuristic_proc_desc): Fix warning found by gcc -Wall.
	(mips16_skip_prologue): Recognize 'addiu s1,sp,n' as a valid
	prologue instruction.  Fix warnings and bugs found by gcc -Wall.
	* buildsym.c (finish_block): Improve handling of overlapping blocks;
	fixes problem on MIPS16 printing function arguments.
1997-02-09 17:36:49 +00:00
Mark Alexander
214e969267 * values.c (unpack_double): Make it compile with MSVC++ 2.x.
* remote-mips.c (S_IROTH): Define if not defined by stat.h, e.g.
	when using MSVC++.
	(common_open): Fix help string.
1996-12-19 17:45:57 +00:00
Mark Alexander
96431497ff * config/mips/tm-mips.h (ADDR_BITS_REMOVE, TARGET_READ_SP): Define.
(mips_addr_bits_remove): Declare.
	* mips-tdep.c (mips_push_dummy_frame): Fix heuristic-fence-post
	errors when hitting breakpoints during inferior function calls
	in 64-bit programs.
	(fix_sign_extension): Make public, rename to mips_addr_bits_remove.
	* utils.c (paddr_nz, preg_nz): New functions, similar to
	paddr and preg but don't print leading zeroes.
	* defs.h (paddr_nz, preg_nz): Declare.
	* remote-mips.c: Use paddr_nz instead of paddr throughout
	to reduce packet size.
	(pmon_end_download): Improve timeout error handling.
1996-11-27 03:40:02 +00:00
Mark Alexander
ee45546371 * mips-tdep.c: Replace hard-coded constants with MIPS_INSTLEN.
(common_breakpoint): Use paddr instead of %x to print 64-bit values.
	(heuristic_proc_desc): Add tests for 64-bit instructions.
	(init_extra_frame_info, mips_push_arguments): Recognize additional
	registers for EABI.
	* remote-mips.c: Extend DDB target to allow TFTP downloads.
	* config/mips/tm-mips.h (MIPS_LAST_ARG_REGNUM, MIPS_NUM_ARG_REGS):
	Define.
1996-11-22 04:50:46 +00:00
Jim Wilson
119dfbb7c1 Patches to add Irix6 host support. 1996-11-12 23:33:32 +00:00
Dawn Perchik
28444bf3a1 * mips-tdep.c, remote-mips.c, values.c, mdebugread.c,
config/mips/tm-mips.h: Add/fix bugs for 64-bit mips support.
	* defs.h: Cleanup; add prototypess
	* corefile.c: Change FIXME #ifdef
	* win32-nat.c: Include windefs instead of windows.h.
	* utils.c: Add routines for printing addresses and registers
	based on type size.
1996-11-11 21:02:55 +00:00
Stan Shebs
5dad831218 * remote-mips.c: Use the correct name everywhere (DDB) for NEC's
VR4300 target.
	(ddb_ops, pmon_ops): Fix the documentation strings.
1996-10-10 01:17:05 +00:00
Jackie Smith Cashion
1db0c2f75c Tue Sep 17 10:56:52 1996 James G. Smith <jsmith@cygnus.co.uk>
* remote-mips.c (pmon_wait): CAIRO PMON does not require forced
 	re-entry back into debug mode.
1996-09-17 10:03:02 +00:00
Jackie Smith Cashion
aeb8f981df Mon Sep 16 14:32:58 1996 James G. Smith <jsmith@cygnus.co.uk>
* remote-mips.c (mips_load): Ensure that the PC is explicitly
 	loaded after a load to a CAIRO PMON system.
1996-09-16 13:37:02 +00:00
Jackie Smith Cashion
5132850605 Fri Aug 30 15:07:14 1996 James G. Smith <jsmith@cygnus.co.uk>
* remote-mips.c: Provide support for CAIRO target board.
	(cairo_open, cairo_ops): Added.
	(mips_monitor_type): MON_CAIRO Added.
	(mips_enter_debug, mips_exit_debug, mips_initialize,
 	mips_fetch_registers, common_breakpoint, mips_load,
 	_initialize_remote_mips): Updated.

Add simple support for NEC CAIRO Vr4300 development board.
1996-08-30 14:15:27 +00:00
Fred Fish
857dcde8c2 * config/mips/nm-mips.h (get_longjmp_target): Add prototype.
* config/mips/nm-irix3.h (get_longjmp_target): Add prototype.
	* remote-mips.c (mips_read_processor_type): Remove prototype.
	* mips-tdep.c (gdb_print_insn_mips): Add prototype and make static.
	* irix5-nat.c (fetch_core_registers): Add prototype.
1996-08-14 08:46:24 +00:00
Geoffrey Noer
3308a10725 Removed EINVAL reference in remote-mips.c, and put a hardcoded 22 in its
place which reflects what the boards return.
1996-05-28 23:20:12 +00:00
Ian Lance Taylor
102f473b78 * remote-mips.c (encoding): Don't specify size, to avoid bug in
SunOS native compiler.
1996-04-19 19:05:00 +00:00
Jackie Smith Cashion
4f005fea32 Sun Mar 3 17:18:57 1996 James G. Smith <jsmith@cygnus.co.uk>
* remote-mips.c (common_breakpoint): Explicitly terminate the
 	returned buffer.
1996-03-03 17:20:15 +00:00
Fred Fish
c37c7c6ca3 * somsolib.c (som_solib_add): Use xmalloc rather than bare
unchecked call to malloc.
	* remote-mips.c (pmon_load_fast): ditto.
	* remote-mm.c (mm_open): ditto.
	* hpread.c (hpread_lookup_type): ditto.
	* remote-adapt.c (adapt_open): ditto.
1996-02-12 22:13:18 +00:00
Jackie Smith Cashion
090d784aaf Tue Jan 16 18:00:35 1996 James G. Smith <jsmith@cygnus.co.uk>
* remote-mips.c (pmon_opn, pmon_wait, pmon_makeb64, pmon_zeroset,
 	pmon_checkset, pmon_make_fastrec, pmon_check_ack,
	pmon_load_fast): New functions. Support for the PMON monitor world.
	(common_open): New function to merge support for different monitors.
	(mips_open): Use common_open().
	(mips_send_command): New function.
	(mips_send_packet): Scan out-of-sequence packets.
	(mips_enter_debug, mips_exit_debug): New functions.
	(pmon_ops): New target definition structure.

These changes provide the initial support for the PMON (3.0.83)
monitor that appears on the Cogent (CMA101) Vr4300 development
board. The changes do not affect the IDT monitor support, other than
in the area of dealing with out-of-sequence packets.
1996-01-16 18:24:44 +00:00
Stan Shebs
1f23375860 * remote-mips.c (mips_receive_header): Recognize \012 instead
of \n, but write \n when program sends a \012.
	* ser-mac.c (mac_input_buffer): Increase size of buffer.
1996-01-09 00:37:35 +00:00
Stu Grossman
4c5bc9f44c * remote-mips.c (mips_receive_header): Allow mips_syn_garbage to be
user-settable (via set syn-garbage-limit).  Setting it to -1 makes
	it unlimited.
1995-12-07 00:21:51 +00:00
Stu Grossman
9cacb47b67 * remote-mips.c (mips_initialize): Fix brain damage found by
Jamie.  Basically had case statement in the wrong place...
	* (mips_load):  Remove unnecessary `db tty0' command.  It's all
	handled by mips_initialize now.
1995-11-08 00:33:16 +00:00
Stu Grossman
afb6948757 * remote-mips.c (mips_initialize): Fix brain damage found by
Jamie.  Basically had case statement in the wrong place...
1995-11-08 00:06:58 +00:00
Jackie Smith Cashion
8b07d12c1f * remote-mips.c (mips_initialize): Updated to talk to VR4300 RISQ
monitor board.

The mips_initialize() code seemed to have a "funny" switch
statement. I also removed an unnecessary switch into debug monitor
mode just before the call to mips_initialize() in mips_load().
1995-11-07 15:05:04 +00:00
Stu Grossman
188c635fbb * Makefile.in (INTERNAL_CFLAGS): Add ENABLE_CFLAGS.
* fork-child.c (fork_inferior):  Add call to
	TARGET_CREATE_INFERIOR_HOOK to allow target specific code to get
	control just before the new process executes it's first instruction.
	* remote-mips.c (mips_initialize):  Cleanup a bit.  Don't try to
	receive a packet at first.  This speeds up initialization a lot.
	Use TARGET_MONITOR_PROMPT instead of "<IDT>".
	(common_breakpoint):  Use rresponse instead of rerrflg to inspect
	error code.
	* symfile.c (syms_from_objfile reread_symbols):  Call
	TARGET_SYMFILE_POSTREAD to allow target specific code to get
	control after reading new symbols.
	* target.h:  New macros TARGET_SYMFILE_POSTREAD, and
	TARGET_CREATE_INFERIOR_HOOK.  See above for descriptions.
	* config/mips/{irix5.mh nm-irix5.h}:  Delete nm-irix5.h.  Make
	NAT_FILE point directly at ../nm-sysv4.h.
	* config/mips/{mipsm3.mh nm-m3.h}:  Delete nm-m3.h.  Make
	NAT_FILE point directly at ../nm-m3.h.
	* config/mips/{mipsv4.mh nm-sysv4.h}:  Delete nm-sysv4.h.  Make
	NAT_FILE point directly at ../nm-sysv4.h.
	* config/mips/nm-mips.h:  Improve comment at top of file.
	* config/mips/tm-mips.h (TARGET_MONITOR_PROMPT):  Change
	definition into a proper string.
start-sanitize-gm
	* configure configure.in:  Add support for --enable-gm.
	(mips*-*-magic*):  Change target from magic to idt.
	* eval.c expprint.c expression.h parse.c remote-mips.c utils.c:
	Change GENERAL_MAGIC_HACKS to GENERAL_MAGIC.
	* magic.c magic.h:  Update files from GM.
	* config/mips/magic.mt:  Delete.  No longer necessary now that we
	use --enable mechanism.
	* config/mips/tm-idt.h:  Add GM stuff needed for remote GM box.
	* config/mips/tm-irix5.h:  Add GM stuff needed for native Irix box.
	* config/mips/tm-magic.h:  Move up to config/tm-magic.h.  Move all
	platform specific stuff into tm-irix.h and tm-idt.h.  Add defs for
	TARGET_SYMFILE_POSTREAD and TARGET_CREATE_INFERIOR_HOOK.
end-sanitize-gm
1995-11-04 19:02:42 +00:00
Stu Grossman
cd10c7e388 * breakpoint.c (breakpoint_re_set): #ifdef GET_LONGJMP_TARGET
around calls to create_longjmp_breakpoint.  Why install the
	breakpoints if we can't find the longjmp target?
	* infrun.c (wait_for_inferior):  Cleanup comments near call test.
	* remote-mips.c:  Fixed a bunch of prototypes to avoid char/int
	complaint from picky compilers.  Add comment to mips_expect.
	Replace all instances of sr_get_debug with remote_debug.
	* (mips_readchar):  Don't jam init string to monitor.
	mips_initialize() handles that.
	* (mips_receive_header):  Print better message when we get too
	much garbage.
	* (mips_request):  Allow caller to pass in buff to allow them to
	analyze the returned message.
	* (mips_initialize):  Re-do initialization to try sending a BREAK,
	a ^C, and then a download escape sequence.  Cleanup protocol
	startup.  Eliminate sleeps.  Clear breakpoints (if using monitor
	breakpoints).  Re-init frame.
	* (mips_detach):  Close down target.
start-sanitize-gm
	* (mips_resume):  Pass signal down to target.
	* (mips_create_inferior):  Start target with TARGET_SIGNAL_PWR.
end-sanitize-gm
	* (mips_wait):  Handle return status with registers, or breakpoint stuff.
	* (mips_kill):  Add ^C handling.
	* (mips_insert_breakpoint mips_remove_breakpoint):  Call new
	breakpoint stuff if enabled.
	* (calculate_mask remote_mips_set_watchpoint
	remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint):
	Hardware watchpoint/breakpoint stuff.
	* (common_breakpoint):  Common code for new monitor breakpoint commands.
	* (mips_load):  Don't use `prompt'.  It's a global variable.
	* top.c (dont_repeat_command):  New command for use in
	user-defined commands to suppress auto-repeat (by hittin return key).
start-sanitize-gm
	* utils.c (request_quit):  Call target_kill here.  Good idea.
	Needs a better implementation.
end-sanitize-gm
	* valops.c:  Add start of auto function-call abandonment capability.

start-sanitize-gm
	* c-exp.y:  Add code (currently disabled) to handle GM dynamic
	structures (it conflicts with @!).
	* eval.c (evaluate_subexp_standard):  ditto.
	* expprint.c (print_subexp dump_expression):  ditto.
	* expression.h (enum exp_opcode):  ditto.
	* parse.c (length_of_subexp):  ditto.
	* configure, configure.in:  Add mip*-*-magic* target.
	* magic.c magic.h:  Special routines to handle GM stuff (like
	stepping through dispatcher).
end-sanitize-gm
1995-10-27 17:48:36 +00:00
Jackie Smith Cashion
0e3a4b1e8e The revision 2.48 change (grossman 1995/10/16) had unfortunately
broken the prompt spotting for the <RISQ> variant of the IDT
monitor. Also took this opportunity to add the vr4300 configure.in
options.
1995-10-23 16:09:58 +00:00
Stu Grossman
4704fd9cab * remote-mips.c: Add support for speedy (about 10x faster)
downloads.
1995-10-16 19:02:41 +00:00
Jackie Smith Cashion
180fd370b1 Ideally the "remote-mips.c" prompt spotting code should be updated to
spot different prompts at run-time, so as to avoid having target
specific versions of gdb. This is a pending TODO.

Fri Sep  1 08:25:50 1995  James G. Smith  <jsmith@beauty.cygnus.com>

        * configure (mips64*vr4300*-*-elf): Support added.
        * remote-mips.c (mips_readchar): Change to allow build-time prompt
        string.
        * config/mips/tm-mips.h: Added TARGET_MONITOR_PROMPT.
        * config/mips/{vr4300.mt, vr4300el.mt, tm-vr4300.h,
        tm-vr4300el.h}: Added.
1995-09-01 15:33:14 +00:00
Fred Fish
6c9638b444 Update FSF address. 1995-08-02 03:41:12 +00:00
Jeff Law
43fc25c87e * inftarg.c (child_thread_alive): New function to see if a
particular thread is still running.
        (child_ops): Add child_thread_alive entry.
        * remote.c (remote_thread_alive): New function to see if a
        particular thread is still alive.
        (remote_ops): Add remote_thread_alive.
        * target.c (dummy_target): Add dummy entry for thread_alive.
        (cleanup_target): de_fault thread_alive too.
        (update_current_target): INHERIT thread_alive too.
        (debug_to_thread_alive): New function.
        (setup_target_debug): Add debug_to_thread_alive.
        * target.h (struct target_ops): Add to_thread_alive.
        (target_thread_alive): Define.
        * thread.c (info_threads_command): Don't call kill; use
        target_thread_alive instead.
        * config/nm-lynx.h (CHILD_THREAD_ALIVE): Define.
        * gdbserver/low-lynx.c (mythread_alive): New function.
        (mywait): Don't restart any threads after a new thread notification,
        let the generic code handle it.
        * gdbserver/low-sparc.c (mythread_alive): Dummy version.
        * gdbserver/low-sun3.c (mythread_alive): Likewise.
        * gdbserver/server.c (main): Handle thread_alive requests.
        * gdbserver/server.h (mythread_alive): Declare.
        * corelow.c (core_ops): Add dummy entry for thread_alive.
        * exec.c (exec_ops): Likewise.
        * m3-nat.c (m3_ops): Likewise.
        * monitor.c (monitor_ops): Likewise.
        * procfs.c (procfs_ops): Likewise.
        * remote-arc.c (arc_ops): Likewise.
        * remote-array.c (array_ops): Likewise.
        * remote-e7000.c (e7000_ops): Likewise.
        * remote-es.c (es1800_ops, es1800_child_ops): Likewise.
        * remote-mips.c (mips_ops): Likewise.
        * remote-pa.c (remote_hppro_ops): Likewise.
        * remote-sim.c (gdbsim_ops): Likewise.
        * sparcl-tdep.c (sparclite_ops): Likewise.

More lynx-6100 work
1995-07-13 21:40:22 +00:00
Stu Grossman
4887063b3c * defs.h maint.c monitor.c remote-mips.c remote.c: Add support
for `watchdog' variable.  This allows the user to put an upper
	limit on the amount of time that GDB will wait for the target to
	return from a step or continue operation.  This will primarily be
	used for the testsuite, where it is difficult to come up with a
	reasonable timeout for things like function calls, which can take
	as long as three minutes under some circumstances.  If the
	watchdog timer expires, GDB will generate an error that looks like
	`Watchdog has expired.', and will detach from the target.

	* remote-mips.c (mips_open):  Setup initial frame from target.
	Print it out so that user is told where the program is stopped
	when they attach.

	* remote-nrom.c:  Loads of cleanups.  Use serial code to open
	network connections.  Use expect() to wait for response to
	download command.

	* ser-tcp.c (tcp_open):  Retry connection if we get ECONNREFUSED.

	* serial.c serial.h (serial_open serial_fdopen serial_close):
	Allow users to open the same device multiple times.  They all get
	to share the same serial_t.  This is about the only way to have
	multiple active targets use the same device (for download and
	debug).

	* sparcl-tdep.c:  Keep #include <unistd.h> away from GO32.

	* target.c:  Add `targetdebug' variable.  If this is non-zero,
	then a special target is put at the top of the target stack which
	will cause all calls through the target vector to have their args
	and results printed out.
1995-06-08 22:42:36 +00:00
Jim Kingdon
73d3dbd4e6 * utils.c, complaints.c, language.c, monitor.c, remote-array.c,
remote-mips.c, remote-os9k.c, remote-st.c: Conditionalize use of
	stdarg rather than varargs on ANSI_PROTOTYPES not __STDC__; it
	must match the definition of PARAMS.
start-sanitize-gdbtk
        * gdbtk.c: Likewise.
end-sanitize-gdbtk
1995-05-19 14:15:48 +00:00
J.T. Conklin
85c613aaa7 * utils.c (fprintf_filtered, fprintf_unfiltered, fprintfi_filtered,
printf_filtered, printf_unfiltered, printfi_filtered, query, warning,
          error, fatal, fatal_dump_core): Use stdarg.h macros when compiling
          with an ANSI compiler.
        * complain.c (complain): Likewise.
        * language.c (type_error, range_error): Likewise.
        * monitor.c (monitor_printf, monitor_printf_noecho): Likewise.
        * remote-array.c (printf_monitor, debuglogs): Likewise.
        * remote-mips.c (mips_error): Likewise.
        * remote-os9k.c (printf_monitor): Likewise.
        * remote-st.c (printf_stdebug): Likewise.
        * gdbtk.c (gdbtk_query): Likewise.

        * defs.h, complain.h, language.h, monitor.h: Add prototypes to
          match above changes.

        * printcmd.c: Remove uneeded #include <varargs.h>.
        * remote-e7000.c: Likewise.

        * f-typeprint.c (f_type_print_base): Fix typo found by above
          changes.
1995-05-18 23:45:31 +00:00
Stan Shebs
ae55bdbcba * defs.h, infcmd.c (reg_names): Don't declare as constant.
* remote-mips.c (mips_open): Read and set the processor type.
	* mips-tdep.c (mips_set_processor_type): Always return an int.
1994-11-18 23:03:29 +00:00
Stu Grossman
78b459a7e7 * corelow.c, exec.c, inftarg.c, m3-nat.c, op50-rom.c, procfs.c,
remote-adapt.c, remote-e7000.c, remote-eb.c, remote-es.c,
	remote-hms.c, remote-mips.c, remote-mm.c, remote-mon.c,
	remote-nindy.c, remote-os9k.c, remote-pa.c, remote-sim.c,
	remote-st.c, remote-udi.c, remote-vx.c, remote-z8k.c, remote.c,
	w89k-rom.c, target.c, target.h:  Add support for target_stop().
	* gdbtk.c (gdb_stop):  Switch to target_stop().
	* ChangeLog:  Fix comment to make shebs happy...
1994-11-03 22:40:14 +00:00
Ian Lance Taylor
1a406ce8c4 * remote-mips.c (break_insn): Remove.
(BREAK_INSN, BREAK_INSN_SIZE): Define.
	(mips_insert_breakpoint): Use BREAK_INSN, not break_insn.
	(mips_remove_breakpoint): Likewise.
1994-10-06 16:42:52 +00:00
Stan Shebs
2b9fbee414 * remote-mips.c (mips_error): Place NORETURN macro correctly.
* TODO: Add item about START_INFERIOR_TRAPS_EXPECTED.
1994-09-15 00:22:11 +00:00
Jim Kingdon
e1f38ddf8e * remote-mips.c: Remove unused declaration of mips_load. 1994-08-17 14:46:57 +00:00
Kung Hsu
d48d9a282a Modified Files:
ChangeLog remote-mips.c

        * remote-mips.c (mips_open): add code to handle baud rate.
1994-08-10 17:37:56 +00:00