Because we are compiling .c files containing C++ code, clang++ complains
with:
clang: error: treating 'c' input as 'c++' when in C++ mode, this behavior is deprecated
If renaming all the source files to .cpp is out of the question, an
alternative is to pass "-x c++" to convince the compiler that we are
really compiling C++. It works fine with GCC too.
gdb/ChangeLog:
* Makefile.in (COMPILE.pre): Add "-x c++".
gdb/gdbserver/ChangeLog:
* Makefile.in (COMPILE.pre): Add "-x c++".
This patch converts functions extract_{unsigned,signed}_integer
to a function template extract_integer, which has two instantiations. It
also does the similar changes to store__{unsigned,signed}_integer,
regcache::raw_read_{unsigned,signed}, regcache::raw_write_{unsigned,signed},
regcache::cooked_read_{unsigned,signed},
regcache::cooked_write_{unsigned,signed}.
This patch was posted here
https://sourceware.org/ml/gdb-patches/2017-05/msg00492.html but the
problem was fixed in a different way. However, I think the patch is still
useful to shorten the code.
gdb:
2017-06-16 Alan Hayward <alan.hayward@arm.com>
Pedro Alves <palves@redhat.com>
Yao Qi <yao.qi@linaro.org>
* defs.h (RequireLongest): New.
(extract_integer): Declare function template.
(extract_signed_integer): Remove the declaration, but define it
static inline.
(extract_unsigned_integer): Likewise.
(store_integer): Declare function template.
(store_signed_integer): Remove the declaration, but define it
static inline.
(store_unsigned_integer): Likewise.
* findvar.c (extract_integer): New function template.
(extract_signed_integer): Remove.
(extract_unsigned_integer): Remove.
(extract_integer<LONGEST>, extract_integer<ULONGEST>): Explicit
instantiations.
(store_integer): New function template.
(store_signed_integer): Remove.
(store_unsigned_integer): Remove.
(store_integer): Explicit instantiations.
* regcache.c (regcache_raw_read_signed): Update.
(regcache::raw_read): New function.
(regcache::raw_read_signed): Remove.
(regcache::raw_read_unsigned): Remove.
(regcache_raw_read_unsigned): Update.
(regcache_raw_write_unsigned): Update.
(regcache::raw_write_signed): Remove.
(regcache::raw_write): New function.
(regcache_cooked_read_signed): Update.
(regcache::raw_write_unsigned): Remove.
(regcache::cooked_read_signed): Remove.
(regcache_cooked_read_unsigned): Update.
(regcache::cooked_read_unsigned): Remove.
(regcache_cooked_write_signed): Update.
(regcache_cooked_write_unsigned): Update.
* regcache.h (regcache) <raw_read_signed>: Remove.
<raw_write_signed, raw_read_unsigned, raw_write_unsigned>: Remove.
<raw_read, raw_write>: New.
<cooked_read_signed, cooked_write_signed>: Remove.
<cooked_write_unsigned, cooked_read_unsigned>: Remove.
<cooked_read, cooked_write>: New.
* sh64-tdep.c (sh64_pseudo_register_read): Update.
(sh64_pseudo_register_write): Update.
For some pc-relative relocations we want to allow them under PIC mode while
a normal global symbol defined in the same dynamic object can still bind
externally through copy relocation. So, we should not allow pc-relative
relocation against such symbol.
SYMBOL_REFERENCES_LOCAL should be used and is more accurate than the original
individual checks.
bfd/
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Use
SYMBOL_REFERENCES_LOCAL.
ld/
* testsuite/ld-aarch64/aarch64-elf.exp: Update test name
* testsuite/ld-aarch64/pcrel.s: Add new testcases.
* testsuite/ld-aarch64/pcrel_pic_undefined.d: Update the expected
warnings.
* testsuite/ld-aarch64/pcrel_pic_defined_local.d: Rename ...
* testsuite/ld-aarch64/pcrel_pic_defined.d: ... to this.
Update expected warnings.
Enforce CPU model for disassembler via its options, if it was specified in XML
target description, otherwise use default method of determining CPU implemented
in disassembler - scanning ELF private header. The latter requires
disassemble_info->section to be properly initialized. To make sure that
info->section is set in all cases this patch partially reverts [1] for ARC: it
reinstates arc_delayed_print_insn as a "print_insn" function for ARC, but
now this function only sets disassemble_info->section and then calls
default_print_insn to do the rest of the job.
Support for CPU in disassembler options for ARC has been added in [2].
[1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=39503f82427e22ed8e04d986ccdc8562091ec62e
[2] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=10045478d984f9924cb945423388ba25b7dd3ffe
gdb/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* arc-tdep.c (arc_disassembler_options): New variable.
(arc_gdbarch_init): Set and use it. Use arc_delayed_print_insn instead
of default_print_insn.
(arc_delayed_print_insn): Set info->section when needed,
use default_print_insn to retrieve a disassembler.
ELF Linker command line option to set stack size is "-z stack-size=SIZE",
not "-z stacksize=SIZE".
* exsup.c (elf_shlib_list_options): Display "-z stack-size=SIZE"
instead of "-z stacksize=SIZE".
As discussed at the PR, this patch tries to avoid COPY relocation generation
and propagate the original relocation into runtime if it was relocating on
writable section. The ELIMINATE_COPY_RELOCS has been set to true and it's
underlying infrastructure has been improved so that the COPY reloc elimination
at least working on absoluate relocations (ABS64) on AArch64.
BFD linker copy relocation elimination framwork requires the backend to always
allocate dynrelocs for all those relocation types that are possible to introduce
copy relocations. This is for adjust_dynamic_symbol hook to be able to get all
symbol reference information. Should one symbol is referenced by more than one
relocations, if there is any of them needs copy relocation then linker should
generate it.
bfd/
PR ld/21532
* elfnn-aarch64.c (ELIMINATE_COPY_RELOCS): Set to 1.
(elfNN_aarch64_final_link_relocate): Also propagate relocations to
runtime for if there needs copy relocation elimination.
(need_copy_relocation_p): New function. Return true for symbol with
pc-relative references and if it's against read-only sections.
(elfNN_aarch64_adjust_dynamic_symbol): Use need_copy_relocation_p.
(elfNN_aarch64_check_relocs): Allocate dynrelocs for relocation types
that are related with accessing external objects.
(elfNN_aarch64_gc_sweep_hook): Sync the relocation types with the change
in elfNN_aarch64_check_relocs.
ld/
* testsuite/ld-aarch64/copy-reloc-exe-2.s: New test source file.
* testsuite/ld-aarch64/copy-reloc-2.d: New test.
* testsuite/ld-aarch64/copy-reloc-exe-eliminate.s: New test source file.
* testsuite/ld-aarch64/copy-reloc-eliminate.d: New test.
* testsuite/ld-aarch64/copy-reloc-so.s: Define new global objects.
* testsuite/ld-aarch64/aarch64-elf.exp: Run new tests.
Since there are only 4 bnd registers, return "(bad)" for register
number > 3.
PR binutils/21594
* i386-dis.c (OP_E_register): Check valid bnd register.
(OP_G): Likewise.
PR binutils/21588
* rl78-decode.opc (OP_BUF_LEN): Define.
(GETBYTE): Check for the index exceeding OP_BUF_LEN.
(rl78_decode_opcode): Use OP_BUF_LEN as the length of the op_buf
array.
* rl78-decode.c: Regenerate.
TLS relaxation may change erratum 843419 sequences that those offending ADRP
instructions actually transformed into other instructions in which case there
is erratum 843419 risk anymore that we should avoid installing unnecessary
branch-to-stub.
gold/
* aarch64.cc (Insn_utilities::is_mrs_tpidr_el0): New method.
(AArch64_relobj<size, big_endian>::try_fix_erratum_843419_optimized):
Return ture for some TLS relaxed sequences.
This simple patch updates the documentation of "help run" in order to
mention that the shell used to start the inferior comes from the
$SHELL environment variable. It also mentions that this behaviour can
be disabled by using the "set startup-with-shell off" command.
gdb/ChangeLog:
2017-06-14 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/21574
* infcmd.c (_initialize_infcmd): Expand "help run" documentation
to mention $SHELL and startup-with-shell.
Get rid of the assumption that XCHAL_* macros are preprocessor
constants: don't use them in preprocessor conditionals or in static
variable initializers.
2017-06-14 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* elf32-xtensa.c (elf_xtensa_be_plt_entry,
elf_xtensa_le_plt_entry): Add dimension for the ABI to arrays,
keep both windowed and call0 ABI PLT definitions.
(elf_xtensa_create_plt_entry): Use selected ABI to choose upper
elf_xtensa_*_plt_entry endex.
(ELF_MAXPAGESIZE): Fix at minimal supported MMU page size.
gas/
* config/tc-xtensa.c (density_supported, xtensa_fetch_width,
absolute_literals_supported): Leave definitions uninitialized.
(directive_state): Leave entries for directive_density and
directive_absolute_literals initialized to false.
(xg_init_global_config, xtensa_init): New functions.
* config/tc-xtensa.h (TARGET_BYTES_BIG_ENDIAN): Define as 0.
(HOST_SPECIAL_INIT): New definition.
(xtensa_init): New declaration.
This is a follow-up to
[PATCH 0/6] Unify the disassembler selection in gdb and objdump
https://sourceware.org/ml/binutils/2017-05/msg00192.html
that is, opcodes is able to select the right disassembler, so gdb
doesn't have to select them. Instead, gdb can just use
default_print_insn. As a result, these print_insn_XXX are not used
out of opcodes, so this patch also moves their declarations from
include/dis-asm.h to opcodes/disassemble.h. With this change,
GDB doesn't use any print_insn_XXX directly any more.
gdb:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_gdb_print_insn): Call
default_print_insn instead of print_insn_aarch64.
* arm-tdep.c (gdb_print_insn_arm): Call
default_print_insn instead of print_insn_big_arm
and print_insn_little_arm.
* i386-tdep.c (i386_print_insn): Call default_print_insn
instead of print_insn_i386.
* ia64-tdep.c (ia64_print_insn): Call
default_print_insn instead of print_insn_ia64.
* mips-tdep.c (gdb_print_insn_mips): Call
default_print_insn instead of print_insn_big_mips
and print_insn_little_mips.
* spu-tdep.c (gdb_print_insn_spu): Call default_print_insn
instead of print_insn_spu.
include:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* dis-asm.h (print_insn_aarch64): Move it to opcodes/disassemble.h.
(print_insn_big_arm, print_insn_big_mips): Likewise.
(print_insn_i386, print_insn_ia64): Likewise.
(print_insn_little_arm, print_insn_little_mips): Likewise.
(print_insn_spu): Likewise.
opcodes:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c: Include disassemble.h instead of dis-asm.h.
* arm-dis.c: Likewise.
* ia64-dis.c: Likewise.
* mips-dis.c: Likewise.
* spu-dis.c: Likewise.
* disassemble.h (print_insn_aarch64): New declaration, moved from
include/dis-asm.h.
(print_insn_big_arm, print_insn_big_mips): Likewise.
(print_insn_i386, print_insn_ia64): Likewise.
(print_insn_little_arm, print_insn_little_mips): Likewise.
ld-gc/pr20022.d requires support for dynamic relocations in .text
section.
PR ld/20022
* testsuite/ld-gc/pr20022.d: Skip on targets without dynamic
relocations in .text section.
Symbol lookup in linker will always fail on targets with leading char
in symbol name since __start_SECNAME and __stop_SECNAME in C may be
___start_SECNAME and ___stop_SECNAME in assembly. Also tests with
--gc-sections always fails on targets without --gc-sections support.
* testsuite/ld-elf/pr21562a.d: Skip on targets with leading char
in in symbol name or without --gc-sections.
* testsuite/ld-elf/pr21562b.d: Likewise.
* testsuite/ld-elf/pr21562c.d: Likewise.
* testsuite/ld-elf/pr21562d.d: Likewise.
* testsuite/ld-elf/pr21562i.d: Likewise.
* testsuite/ld-elf/pr21562j.d: Likewise.
* testsuite/ld-elf/pr21562k.d: Likewise.
* testsuite/ld-elf/pr21562l.d: Likewise.
* testsuite/ld-elf/pr21562m.d: Likewise.
* testsuite/ld-elf/pr21562n.d: Likewise.
* testsuite/ld-elf/pr21562e.d: Skip on targets with leading char
in symbol name.
* testsuite/ld-elf/pr21562f.d: Likewise.
* testsuite/ld-elf/pr21562g.d: Likewise.
* testsuite/ld-elf/pr21562h.d: Likewise.
Symbol lookup in linker will always fail on targets with leading char
in symbol name since __start_SECNAME and __stop_SECNAME in C may be
___start_SECNAME and ___stop_SECNAME in assembly.
* testsuite/ld-elf/sizeofa.d: Skip on targets with leading char
in symbol name.
* testsuite/ld-elf/sizeofb.d: Likewise.
* testsuite/ld-elf/startofa.d: Likewise.
* testsuite/ld-elf/startofb.d: Likewise.
PR binutils/21587
* rx-decode.opc: Include libiberty.h
(GET_SCALE): New macro - validates access to SCALE array.
(GET_PSCALE): New macro - validates access to PSCALE array.
(DIs, SIs, S2Is, rx_disp): Use new macros.
* rx-decode.c: Regenerate.
The new test var-access.exp causes FAILs on i686. This is because the
test chooses the wrong name for DWARF register number 1: It uses
"edx" (which corresponds to DWARF register number 2), but should have used
"ecx" instead.
Also, the current logic in var-access.exp does not correctly distinguish
between a 64-bit and a 32-bit program on an x86-64 target. It uses the
64-bit register names for both.
These problems are fixed. In order to address the latter, the convenience
macros is_*_target are exploited where appropriate.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/var-access.exp: Use register name ecx instead of edx
on 32-bit x86 targets. Exploit is_*_target macros where
appropriate.
PR binutils/21589
* vms-alpha.c (_bfd_vms_get_value): Add an extra parameter - the
maximum value for the ascic pointer. Check that name processing
does not read beyond this value.
(_bfd_vms_slurp_etir): Add checks for attempts to read beyond the
end of etir record.
In some cases we've been replacing heap-allocated gdb_byte buffers
managed with xmalloc/make_cleanup(xfree) with gdb::vector<gdb_byte>.
That usually pessimizes the code a little bit because std::vector
value-initializes elements (which for gdb_byte means
zero-initialization), while if you're creating a temporary buffer,
you're most certaintly going to fill it in with some data. An
alternative is to use
unique_ptr<gdb_byte[]> buf (new gdb_byte[size]);
but it looks like that's not very popular.
Recently, a use of obstacks in dwarf2read.c was replaced with
std::vector<gdb_byte> and that as well introduced a pessimization for
always memsetting the buffer when it's garanteed that the zeros will
be overwritten immediately. (see dwarf2read.c change in this patch to
find it.)
So here's a different take at addressing this issue "by design":
#1 - Introduce default_init_allocator<T>
I.e., a custom allocator that does default construction using default
initialization, meaning, no more zero initialization. That's the
default_init_allocation<T> class added in this patch.
See "Notes" at
<http://en.cppreference.com/w/cpp/container/vector/resize>.
#2 - Introduce def_vector<T>
I.e., a convenience typedef, because typing the allocator is annoying:
using def_vector<T> = std::vector<T, gdb::default_init_allocator<T>>;
#3 - Introduce byte_vector
Because gdb_byte vectors will be the common thing, add a convenience
"byte_vector" typedef:
using byte_vector = def_vector<gdb_byte>;
which is really the same as:
std::vector<gdb_byte, gdb::default_init_allocator<gdb_byte>>;
The intent then is to make "gdb::byte_vector" be the go-to for dynamic
byte buffers. So the less friction, the better.
#4 - Adjust current code to use it.
To set the example going forward. Replace std::vector uses and also
unique_ptr<byte[]> uses.
One nice thing is that with this allocator, for changes like these:
-std::unique_ptr<byte[]> buf (new gdb_byte[some_size]);
+gdb::byte_vector buf (some_size);
fill_with_data (buf.data (), buf.size ());
the generated code is the same as before. I.e., the compiler
de-structures the vector and gets rid of the unused "reserved vs size"
related fields.
The other nice thing is that it's easier to write
gdb::byte_vector buf (size);
than
std::unique_ptr<gdb_byte[]> buf (new gdb_byte[size]);
or even (C++14):
auto buf = std::make_unique<gdb_byte[]> (size); // zero-initializes...
#5 - Suggest s/std::vector<gdb_byte>/gdb::byte_vector/ going forward.
Note that this commit actually fixes a couple of bugs where the current
code is incorrectly using "std::vector::reserve(new_size)" and then
accessing the vector's internal buffer beyond the vector's size: see
dwarf2loc.c and charset.c. That's undefined behavior and may trigger
debug mode assertion failures. With default_init_allocator,
"resize()" behaves like "reserve()" performance wise, in that it
leaves new elements with unspecified values, but, it does that safely
without triggering undefined behavior when you access those values.
gdb/ChangeLog:
2017-06-14 Pedro Alves <palves@redhat.com>
* ada-lang.c: Include "common/byte-vector.h".
(ada_value_primitive_packed_val): Use gdb::byte_vector.
* charset.c (wchar_iterator::iterate): Resize the vector instead
of reserving it.
* common/byte-vector.h: Include "common/def-vector.h".
(wchar_iterator::m_out): Now a gdb::def_vector<gdb_wchar_t>.
* cli/cli-dump.c: Include "common/byte-vector.h".
(dump_memory_to_file, restore_binary_file): Use gdb::byte_vector.
* common/byte-vector.h: New file.
* common/def-vector.h: New file.
* common/default-init-alloc.h: New file.
* dwarf2loc.c: Include "common/byte-vector.h".
(rw_pieced_value): Use gdb::byte_vector, and resize the vector
instead of reserving it.
* dwarf2read.c: Include "common/byte-vector.h".
(data_buf::m_vec): Now a gdb::byte_vector.
* gdb_regex.c: Include "common/def-vector.h".
(compiled_regex::compiled_regex): Use gdb::def_vector<char>.
* mi/mi-main.c: Include "common/byte-vector.h".
(mi_cmd_data_read_memory): Use gdb::byte_vector.
* printcmd.c: Include "common/byte-vector.h".
(print_scalar_formatted): Use gdb::byte_vector.
* valprint.c: Include "common/byte-vector.h".
(maybe_negate_by_bytes, print_decimal_chars): Use
gdb::byte_vector.
PR binutils/21591
* versados.c (versados_mkobject): Zero the allocated tdata structure.
(process_otr): Check for an invalid offset in the otr structure.
In particular this adds support for the epiphany-rtems target.
bfd/
* config.bfd (epiphany-*-elf): Accept epiphany-*-*.
ld/
* configure.tgt (epiphany-*-elf): Accept epiphany-*-*.
__start_SECNAME and __stop_SECNAME shouldn't be defined for "ld -r".
* ldlang.c (lang_set_startof): Skip if config.build_constructors
is FALSE.
* testsuite/ld-elf/sizeofc.d: New file.
* testsuite/ld-elf/startofc.d: Likewise.
I forgot this one, which is kind of related.
The function trace_start_error_with_name has moved in commit "Share
fork_inferior et al with gdbserver", so this additional include is
needed.
Fixes:
darwin-nat.c:1735:5: error: use of undeclared identifier 'trace_start_error_with_name'
trace_start_error_with_name ("close");
gdb/ChangeLog:
* darwin-nat.c: Include "nat/fork-inferior.h".
I happened to be build-testing on macOS and found this:
Undefined symbols for architecture x86_64:
"fork_inferior(char const*, std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> > const&, char**, void (*)(), void (*)(int), void (*)(), char const*, void (*)(char const*, char* const*, char* const*))", referenced from:
darwin_create_inferior(target_ops*, char const*, std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> > const&, char**, int) in darwin-nat.o
"startup_inferior(int, int, target_waitstatus*, ptid_t*)", referenced from:
gdb_startup_inferior(int, int) in fork-child.o
"trace_start_error(char const*, ...)", referenced from:
darwin_ptrace_me() in darwin-nat.o
"trace_start_error_with_name(char const*)", referenced from:
darwin_ptrace_me() in darwin-nat.o
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Adding fork-inferior.o fixes it. I factored out the Darwin bits that
are no architecture-specific in the section meant for that at the top.
I only built-tested this using Travis-CI, since I don't have access to
this platform.
gdb/ChangeLog:
* configure.nat: Factor out Darwin bits that are not
architecture-specific. Add fork-inferior.o.
Trying to build on AIX gives:
ld: 0711-317 ERROR: Undefined symbol: .trace_start_error_with_name(char const*)
ld: 0711-317 ERROR: Undefined symbol: .fork_inferior(char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, char**, void (*)(), void (*)(int), void (*)(), char const*, void (*)(char const*, char* const*, char* const*))
ld: 0711-317 ERROR: Undefined symbol: .startup_inferior(int, int, target_waitstatus*, ptid_t*)
Including fork-inferior.o in the build should help. I also factored out
the AIX bits that are not architecture-specific to be consistent with the other
OSes.
gdb/ChangeLog:
* configure.nat: Factor out AIX bits that are not
architecture-specific. Add fork-inferior.o.
Currently, linker will define __start_SECNAME and __stop_SECNAME symbols
only for orphaned sections.
However, during garbage collection, ELF linker marks all sections with
references to __start_SECNAME and __stop_SECNAME symbols as used even
when section SECNAME isn't an orphaned section and linker won't define
__start_SECNAME nor __stop_SECNAME. And ELF linker stores the first
input section whose name matches __start_SECNAME or __stop_SECNAME in
u.undef.section for garbage collection. If these symbols are provided
in linker script, u.undef.section is set to the section where they will
defined by linker script, which leads to the incorrect output.
This patch changes linker to always define referenced __start_SECNAME and
__stop_SECNAME if the input section name is the same as the output section
name, which is always true for orphaned sections, and SECNAME is a C
identifier. Also __start_SECNAME and __stop_SECNAME symbols are marked
as hidden by ELF linker so that __start_SECNAME and __stop_SECNAME symbols
for section SECNAME in different modules are unique. For garbage
collection, ELF linker stores the first matched input section in the
unused vtable field.
bfd/
PR ld/20022
PR ld/21557
PR ld/21562
PR ld/21571
* elf-bfd.h (elf_link_hash_entry): Add start_stop. Change the
vtable field to a union.
(_bfd_elf_is_start_stop): Removed.
* elf32-i386.c (elf_i386_convert_load_reloc): Also check for
__start_SECNAME and __stop_SECNAME symbols.
* elf64-x86-64.c (elf_x86_64_convert_load_reloc): Likewise.
* elflink.c (_bfd_elf_is_start_stop): Removed.
(_bfd_elf_gc_mark_rsec): Check start_stop instead of calling
_bfd_elf_is_start_stop.
(elf_gc_propagate_vtable_entries_used): Skip __start_SECNAME and
__stop_SECNAME symbols. Updated.
(elf_gc_smash_unused_vtentry_relocs): Likewise.
(bfd_elf_gc_record_vtinherit): Likewise.
(bfd_elf_gc_record_vtentry): Likewise.
ld/
PR ld/20022
PR ld/21557
PR ld/21562
PR ld/21571
* ld.texinfo: Update __start_SECNAME/__stop_SECNAME symbols.
* ldlang.c (lang_insert_orphan): Move handling of __start_SECNAME
and __stop_SECNAME symbols to ...
(lang_set_startof): Here. Also define __start_SECNAME and
__stop_SECNAME for -Ur.
* emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Mark
referenced __start_SECNAME and __stop_SECNAME symbols as hidden
and set start_stop for garbage collection.
* testsuite/ld-elf/pr21562a.d: New file.
* testsuite/ld-elf/pr21562a.s: Likewise.
* testsuite/ld-elf/pr21562a.t: Likewise.
* testsuite/ld-elf/pr21562b.d: Likewise.
* testsuite/ld-elf/pr21562b.s: Likewise.
* testsuite/ld-elf/pr21562b.t: Likewise.
* testsuite/ld-elf/pr21562c.d: Likewise.
* testsuite/ld-elf/pr21562c.t: Likewise.
* testsuite/ld-elf/pr21562d.d: Likewise.
* testsuite/ld-elf/pr21562d.t: Likewise.
* testsuite/ld-elf/pr21562e.d: Likewise.
* testsuite/ld-elf/pr21562f.d: Likewise.
* testsuite/ld-elf/pr21562g.d: Likewise.
* testsuite/ld-elf/pr21562h.d: Likewise.
* testsuite/ld-elf/pr21562i.d: Likewise.
* testsuite/ld-elf/pr21562j.d: Likewise.
* testsuite/ld-elf/pr21562k.d: Likewise.
* testsuite/ld-elf/pr21562l.d: Likewise.
* testsuite/ld-elf/pr21562m.d: Likewise.
* testsuite/ld-elf/pr21562n.d: Likewise.
* testsuite/ld-gc/pr20022.d: Likewise.
* testsuite/ld-gc/pr20022a.s: Likewise.
* testsuite/ld-gc/pr20022b.s: Likewise.
* testsuite/ld-gc/gc.exp: Run PR ld/20022 tests.
* testsuite/ld-gc/pr19161.d: Also accept local __start_SECNAME
symbol.
* testsuite/ld-gc/start.d: Likewise.
* testsuite/ld-x86-64/lea1a.d: Updated.
* testsuite/ld-x86-64/lea1b.d: Updated.
* testsuite/ld-x86-64/lea1d.d: Updated.
* testsuite/ld-x86-64/lea1e.d: Likewise.
Test -Ur with __start_SECNAME, __stop_SECNAME, .startof.SECNAME and
.sizeof.SECNAME. __start_SECNAME and __stop_SECNAME should be defined
to the start and the end of section SECNAME. .startof.SECNAME and
.sizeof.SECNAME should be undefined.
* testsuite/ld-elf/sizeof.d: New file.
* testsuite/ld-elf/sizeof.s: Likewise.
* testsuite/ld-elf/startof.d: Likewise.
* testsuite/ld-elf/startof.s: Likewise.
