Mark Eichin
2ec3d07cc7
only set PWD if it is already set (and likely wrong). from p3.
1992-09-18 07:37:38 +00:00
John Gilmore
4a63dfde28
Changes to make the gdb.tar.Z rule work better.
...
* Makefile.in (GDB_SUPPORT_DIRS): Add opcodes.
(DEVO_SUPPORT): Add configure.texi.
(bfd-ilrt.tar.Z): Remove ancient rule.
1992-09-18 06:59:58 +00:00
Mark Eichin
fc11b71ac4
from p3. Some shells leave PWD in the environment (old tcsh, ksh at least)
...
screws nested configures. "unset PWD" is the right answer, except that
Decstation sh doesn't *have* unset.
Note also that the send-pr build will fail if you have PWD in your
environment, because emacs also (foolishly) trusts it.
* configure: just set PWD=`pwd` at the top, since Ultrix sh
doesn't have unset and all success paths (and most error paths)
out set it anyway. (Note: should change all uses of ${PWD=`pwd`}
to just ${PWD} to avoid confusion.)
1992-09-18 06:16:37 +00:00
Ian Lance Taylor
c51083226c
Changes to make an installed cross-compiler find everything correctly.
...
Tue Sep 15 16:00:54 1992 Ian Lance Taylor (ian@cygnus.com )
* configure: always set $(tooldir) to $(libdir)/$(target_alias),
even for a native compilation.
1992-09-15 23:26:16 +00:00
Ian Lance Taylor
0012a471ae
Thu Sep 10 10:43:19 1992 Ian Lance Taylor (ian@cygnus.com)
...
* Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
pick up the machine and system specific header files.
1992-09-10 22:45:45 +00:00
Ian Lance Taylor
f68be6f088
Thu Sep 10 10:43:19 1992 Ian Lance Taylor (ian@cygnus.com)
...
* configure.in, config.sub: added new target m68010-adobe-scout,
with alias of adobe68k. Changed configure.in to check for
-scout before -sco* to avoid a false match.
1992-09-10 18:04:50 +00:00
Ian Lance Taylor
440868a029
Thu Sep 10 10:43:19 1992 Ian Lance Taylor (ian@cygnus.com)
...
* Makefile.in: added AS_FOR_TARGET, passed down in
TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
the C compiler to use to create programs which are run in the
build environment, set it to default to $(CC), and passed it down
in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
1992-09-10 17:45:18 +00:00
Ian Lance Taylor
5148923360
Wed Sep 9 12:21:42 1992 Ian Lance Taylor (ian@cygnus.com)
...
* Makefile.in: added TARGET_FLAGS_TO_PASS, CC_FOR_TARGET,
AR_FOR_TARGET, RANLIB_FOR_TARGET, NM_FOR_TARGET. Pass
TARGET_FLAGS_TO_PASS, which defines CC, AR, RANLIB and NM as the
FOR_TARGET variants, to newlib and libg++.
1992-09-09 19:24:23 +00:00
Ken Raeburn
a904db5348
build opcodes before gas or gdb
1992-09-09 03:15:37 +00:00
Steve Chamberlain
319a021edf
* Makefile.in: all-opcodes, cd into the right directory
1992-09-01 22:49:37 +00:00
Ian Lance Taylor
d257b46f88
Sun Aug 30 21:12:11 1992 Ian Lance Taylor (ian@cygnus.com)
...
* configure: added -program_transform_name option, used as
argument to sed when installing programs.
configure.texi: added documentation for -program_prefix,
-program_suffix and -program_transform_name.
1992-09-01 01:12:41 +00:00
John Gilmore
6e122179f3
Accept i486 where i386 ok.
1992-08-28 05:00:36 +00:00
Brendan Kehoe
de0f17d890
* config.sub: add we32k
1992-08-27 22:19:51 +00:00
Ian Lance Taylor
56dcef3cd2
Brought up from p3:
...
Mon Aug 24 14:05:14 1992 Ian Lance Taylor (ian@cygnus.com )
* Makefile.in: don't create all directories for ``make install'';
let the subdirectories create the ones they need.
1992-08-24 21:06:34 +00:00
David D. Zuhn
01b8752d28
fix INFO-DIR-ENTRY, new gen-info-dir
1992-08-04 08:20:51 +00:00
David D. Zuhn
dfa891fc11
clean up Makefile.in (install), configure.in (the parts that choose what not to build for a host or target)
1992-08-03 22:44:29 +00:00
Fred Fish
26fe0d7d42
* config.sub (ncr3000): Change i386 to i486.
1992-08-03 07:35:08 +00:00
K. Richard Pixley
b4edd96978
build in-place before other builds
1992-07-18 05:59:30 +00:00
K. Richard Pixley
ff34c090ce
remove stamp-co on very
1992-07-18 05:58:14 +00:00
K. Richard Pixley
dae8a4cf86
predicate stage3 and comparison on the existence of gcc
1992-07-18 05:56:28 +00:00
K. Richard Pixley
846b9d7b0d
recurse explicitly with -f test-build.mk when appropriate.
1992-07-18 05:54:04 +00:00
Steve Chamberlain
3ad0ef3736
* Makefile.in, configure.in: add tgas
1992-07-17 01:34:45 +00:00
K. Richard Pixley
06a0794409
progressive changes
1992-07-16 23:09:11 +00:00
K. Richard Pixley
2d115749d7
add libm
1992-07-16 23:06:53 +00:00
K. Richard Pixley
67b36a2352
ignore some stuff that comes from test-build.mk.
1992-07-16 23:06:03 +00:00
K. Richard Pixley
1775539efb
remove some stray cvsmerge crud
1992-07-16 23:05:20 +00:00
Stu Grossman
179798e1e0
* config/mh-solaris: Use -xs when compiling so that Sun-C puts
...
a symbol-table into the executable.
1992-07-08 07:04:02 +00:00
Fred Fish
a416804911
* config.sub: Add es1800 (m68k-ericsson-es1800).
1992-07-07 07:25:41 +00:00
Steve Chamberlain
4347369fb1
* configure: fix various problems with propogating
...
makefile_target_frag in subdirs.
* configure.in: config libgcc if its there
1992-06-23 01:32:47 +00:00
Stu Grossman
7d87ec828f
* config.sub: HPPA merge.
1992-06-19 22:20:16 +00:00
Fred Fish
65f14e33aa
* config/mh-ncr3000 (INSTALL): Don't use /usr/ucb/install,
...
it is broken on ncr 3000's.
1992-06-15 19:32:53 +00:00
John Gilmore
18eb7badc4
Add sun4sol2 => sparc-sun-solaris2.
1992-06-13 05:23:04 +00:00
Per Bothner
f0e9ba1e63
* config.sub: Add support for Linux.
...
* Makefile.in: Use $(FLAGS_TO_PASS) more consistently (at least for libg++).
1992-06-04 07:38:43 +00:00
David D. Zuhn
72754842fc
fix -nfp documentation
1992-06-03 03:06:02 +00:00
Michael Tiemann
2198e4ba24
Makefile.in (all-binutils): ar needs flex, so depend on all-flex.
1992-06-03 00:21:33 +00:00
David D. Zuhn
a5992d117e
recognize m680[1234] as separate processors now
1992-05-31 08:12:16 +00:00
David D. Zuhn
07f1d175cf
better error testing on perverse cases (eg, ./config.sub -sun3)
1992-05-31 04:04:03 +00:00
Michael Tiemann
49df230880
Add flex to the list of keepers. flex is needed to build GNU ld.
1992-05-29 02:49:34 +00:00
Michael Tiemann
ad1f7512f8
Pass $tooldir in FLAGS_TO_PASS. Define -aout in $os. Both of these
...
are needed to do a `make all install' for a vxworks68 target install.
1992-05-28 06:21:54 +00:00
Michael Tiemann
11ad114b76
Thu May 21 18:00:09 1992 Michael Tiemann (tiemann@rtl.cygnus.com)
...
* Makefile.in (tooldir): Define it.
(all-ld): Depend on all-flex.
1992-05-22 15:56:20 +00:00
K. Richard Pixley
9dba22c625
do not bury pwd into config.status, thus do fewer pwds
1992-05-08 20:29:39 +00:00
K. Richard Pixley
3b6f914fb4
print Building message only when subdir != . AND verbose
1992-05-08 19:34:32 +00:00
K. Richard Pixley
a98e98d368
remove -s, rework -v to better accomodate guested configures
1992-05-08 18:29:38 +00:00
K. Richard Pixley
a60ff51268
updated to 3 may
1992-05-08 15:32:25 +00:00
K. Richard Pixley
5bdf762bb8
pass INSTALL, INSTALL_DATA, INSTALL_PROGRAM on install
1992-04-30 15:58:03 +00:00
K. Richard Pixley
1dbe4d41aa
do not print subdir_do lines or recursion lines
1992-04-24 22:56:39 +00:00
K. Richard Pixley
618f57a9a2
add autoconf
1992-04-24 21:46:16 +00:00
K. Richard Pixley
92b9ed409a
configure: test for and move config.status pieces from subdir.
1992-04-23 01:07:40 +00:00
Fred Fish
58760cdaa2
Test for nonexistance of files before trying to mv them, to avoid numerous
...
nonexistance error messages.
1992-04-22 21:41:44 +00:00
K. Richard Pixley
53988f33e8
correct final line of config.status
1992-04-21 19:52:54 +00:00
K. Richard Pixley
86112802a9
configure: patch from eggert. Avoids a protection problem if the
...
original Makefile.in is read only.
1992-04-21 19:49:03 +00:00
K. Richard Pixley
196377eec6
configure: use move-if-change from gcc to create config.status. Some
...
makefiles depend on config.status to tell if a directory has been
reconfigured for a different host. This change prevents those
directories from remaking everything in the case where the reconfig
was only intended to rebuild a Makefile.
1992-04-21 19:36:11 +00:00
K. Richard Pixley
94c7ae212d
configure: test for config.sub with "config.sub sun4" rather than
...
"config.sub ${host_alias}". Otherwise we can't tell a bad host alias
from a missing config.sub.
1992-04-21 19:33:13 +00:00
K. Richard Pixley
9546e9b45c
correct makesrcdir when subdir is .
1992-04-21 04:05:37 +00:00
K. Richard Pixley
e1ca00723d
.NOEXPORT: so that children don't pick up false values for things like makefile frags
1992-04-16 02:57:23 +00:00
K. Richard Pixley
ee1dc1b77d
correction to makesrcdir for relative srcdir
1992-04-16 01:24:59 +00:00
Per Bothner
8becd045a3
* configure: Add support for 'subdirs' variable, which is
...
like 'configdirs', except that configure doesn't re-invoke
itself for subdirs, it just creates a Makefile for each subdir.
* configure.texi: Document subdirs.
1992-04-14 19:02:48 +00:00
David D. Zuhn
6adac399aa
updated configure.in to include flex
1992-04-14 01:51:00 +00:00
K. Richard Pixley
64d424c633
remove clean-stamps from clean
1992-04-14 01:44:23 +00:00
John Gilmore
347e3a00bb
We now configure gdbtest automatically if it's there.
1992-04-11 10:52:33 +00:00
Fred Fish
c4fb14b791
Add MINUS_G macro, default to -g, and pass on to recursive makes.
...
Recognize new ncr3000 config.
1992-04-11 06:13:43 +00:00
Per Bothner
6910a5ac8d
* config.sub: Don't canonicalize os value
...
newsos* to bsd (readline needs to check for newsos).
(This fix was earlier made Jan 31, but got re-broken.)
1992-04-07 23:52:37 +00:00
Stu Grossman
27c28d61ce
* configure.in: sco is an os, not a vendor!
1992-04-07 05:57:36 +00:00
Stu Grossman
dd7368a7cf
* configure: Quote $( better. Keep various shells happy.
1992-04-06 21:35:22 +00:00
K. Richard Pixley
079b2abe97
add send_pr. remove "force" from .stmp-gprof rule. Supress echoing of all the "if [ -d ... $(MAKE)" lines.
1992-03-31 06:35:16 +00:00
K. Richard Pixley
88578a2a10
re-add -rm
1992-03-25 18:34:46 +00:00
K. Richard Pixley
e855b0f8a8
add stamp-rcs to all
1992-03-25 07:51:57 +00:00
K. Richard Pixley
b4e2a59bef
remove gas from rs6000 build, use aix host fragment
1992-03-25 07:51:05 +00:00
K. Richard Pixley
0e693d0b0e
pass site_option to recursions
1992-03-25 07:49:53 +00:00
Stu Grossman
52963fb7e9
Add .stmp-readline to all.cross...
1992-03-20 00:53:45 +00:00
Stu Grossman
66cfe047e5
* Makefile.in (all.cross): Add .stmp-bfd.
1992-03-20 00:51:23 +00:00
Fred Fish
bb24c7e6f6
Add support for mmalloc library.
1992-03-15 01:21:52 +00:00
K. Richard Pixley
b7dd30ab1c
add stmp dependencies for a few more things
1992-03-14 02:45:00 +00:00
K. Richard Pixley
1cb49e8746
add libiberty stmp to all and all.cross
1992-03-12 12:56:53 +00:00
K. Richard Pixley
02a7ba9a40
remove force from dependencies, add grep to all
1992-03-11 10:08:54 +00:00
K. Richard Pixley
8fd24008f7
added check for conflicting configurations (srcdir vs not)
1992-03-11 06:24:19 +00:00
K. Richard Pixley
c9b0df66be
remove trailing slashes from srcdir so gdb-mode won't get cranky
1992-03-11 06:07:29 +00:00
K. Richard Pixley
9d98d2ac35
drop flex. make stamp files work
1992-03-11 05:57:50 +00:00
K. Richard Pixley
c1e4672ca0
use relative paths for configure and srcdir when possible
1992-03-11 05:50:05 +00:00
K. Richard Pixley
b74fd080fb
mkdir $(infodir) on install-info.
1992-02-25 01:08:38 +00:00
Stu Grossman
b0606560a3
* config.sub (near case $os): Don't convert newsos* to bsd!CVS:
1992-02-01 05:49:27 +00:00
Stu Grossman
92732c2789
* bfd/configure.in, config/mh-sco, gdb/config/mh-i386sco,
...
gdb/config/mt-i386v32, gdb/configure.in, readline/configure.in:
Fix SCO configuration stuff.
1992-01-31 00:24:21 +00:00
Per Bothner
4cc027e126
* Makefile.in: For libg++, make sure the -I pointing
...
to the gcc directory goes *after* all the libg++-local -I flags.
Also, move just-gcc dependency from just-libg++ to all-libg++.
1992-01-29 07:52:01 +00:00
Fred Fish
aa2e8c1c98
Add stratus configuration frags. Also submitted to FSF.
1992-01-19 01:04:42 +00:00
Stu Grossman
1a7cac26ae
* Makefile.in (DEV_SUPPORT): add configure.man.
1992-01-19 00:04:43 +00:00
Stu Grossman
c1e296fc1f
* config.sub(Decode manufacturer-specific): add -none*.
1992-01-18 23:36:54 +00:00
Stu Grossman
23e3e7f949
* Makefile.in: remove form feeds to make Sun's make happy.
...
(DEVO_SUPPORT): DOC.configure => cfg-paper.texi.
1992-01-18 02:03:00 +00:00
K. Richard Pixley
079399f6df
small changes to accomodate other versions of configure
1991-12-28 03:15:17 +00:00
K. Richard Pixley
25113b4647
flex joins the fray, also fixed clean-info in devo.
1991-12-28 01:27:15 +00:00
K. Richard Pixley
e488e58118
Be less sensitive to spaces in Makefile.in. Kills bug #556 .
1991-12-28 00:29:34 +00:00
K. Richard Pixley
62ddb92b9f
some changes suggested by rms
1991-12-27 00:31:34 +00:00
Fred Fish
7dac608620
Merge in some small additions from the FSF version (taken from the gcc
...
config.sub file) to bring the Cygnus and FSF versions into closer sync.
1991-12-26 18:15:48 +00:00
Fred Fish
5f32984ea6
Change svr4 references to sysv4.
1991-12-20 19:35:15 +00:00
K. Richard Pixley
0c72405d83
added -V for version number option
1991-12-19 23:55:06 +00:00
K. Richard Pixley
7d283cc12f
revised, updated, texinfo'd and renamed
1991-12-18 23:42:08 +00:00
K. Richard Pixley
7da1d33424
find config.subr again
1991-12-13 09:38:48 +00:00
K. Richard Pixley
f6031817bf
resync from rms
1991-12-13 09:17:37 +00:00
K. Richard Pixley
475576aef9
config.sub & config.subr merge
1991-12-12 06:30:17 +00:00
K. Richard Pixley
9a9e8e7f4b
revised install for dir.info
1991-12-12 06:25:48 +00:00
K. Richard Pixley
c466cfab84
infodir belongs in datadir
1991-12-11 04:15:50 +00:00
K. Richard Pixley
65fd9a4d8b
clean-gdbm on clean
1991-12-10 11:58:56 +00:00
K. Richard Pixley
bb07ee3ebd
install-gcc on install
1991-12-10 11:14:48 +00:00
K. Richard Pixley
806fd9fc4e
add decstation host makefile frag
1991-12-10 08:10:33 +00:00
K. Richard Pixley
e9712beec8
BISON now bison -y again
1991-12-10 08:05:11 +00:00
K. Richard Pixley
b26ff9d824
fix for bad directory tests
1991-12-10 00:49:07 +00:00
K. Richard Pixley
0e0643c7a6
* configure: \{1,2\} appears to be a sysv'ism. Use a different
...
regexp.
1991-12-07 10:32:08 +00:00
K. Richard Pixley
098676c9d9
Initial revision
1991-12-07 08:34:52 +00:00