The `got-dump-1' test case uses 32-bit addressing, so it makes no sense
to run it with the n64 ABI. And there is a corresponding `got-dump-2'
test already for the n64 ABI.
Use the per-ABI framework then to run the `got-dump-1' test explicitly
for o32 and n32 ABIs only.
ld/
* testsuite/ld-mips-elf/mips-elf.exp: Run `got-dump-1' for o32
and n32 ABIs only.
OpenBSD targets produce ELF64 files while the pattern dump expects ELF32
output and specific header sizes. Disable it for `mips64*-*-openbsd*'
for these targets then, removing these failures:
mips64-openbsd -FAIL: ld-mips-elf/attr-gnu-4-10
mips64el-openbsd -FAIL: ld-mips-elf/attr-gnu-4-10
ld/
* testsuite/ld-mips-elf/attr-gnu-4-10.d: Add `notarget' tag with
`mips64*-*-openbsd*'.
IRIX targets do not enable the production of a `.pdr' section in GAS by
default, which causes a failure with the `attr-gnu-4-10' test case due
to a difference resulting in the number and indices of sections produced
in linker output.
As the presence or absence of this section is not relevant to this test
case, just enable it unconditionally, fixing these regressions:
mips-sgi-irix5 -FAIL: ld-mips-elf/attr-gnu-4-10
mips-sgi-irix6 -FAIL: ld-mips-elf/attr-gnu-4-10
ld/
* testsuite/ld-mips-elf/attr-gnu-4-10.d: Add `as' tag with
`-mpdr'.
The `mips-sgi-irix6' target only supports IRIX linker emulations, but
most JALR relaxation tests request the relevant traditional emulation
instead, causing a link failure:
./ld-new: unrecognised emulation mode: elf32btsmipn32
Supported emulations: elf32bmipn32 elf32bsmip elf64bmip
This is clearly an omission from the conversion to use the per-ABI
framework made with commit 78da84f994 ("MIPS/LD/testsuite: Correct
mips-elf.exp test ABI/emul/endian arrangement"). These tests are also
endianness agnostic, which was missed in the conversion as well.
Remove the unnecessary explicit ABI and endianness options then and rely
on the per-ABI framework to get things right, removing this regression:
mips-sgi-irix6 -FAIL: MIPS relax-jalr-shared n32
ld/
* testsuite/ld-mips-elf/relax-jalr-n32-shared.d: Remove flags
related to ABI and endianness selection from the `as' and `ld'
tags.
* testsuite/ld-mips-elf/relax-jalr-n64.d: Likewise.
* testsuite/ld-mips-elf/relax-jalr-n64-shared.d: Likewise.
* testsuite/ld-mips-elf/mips-elf.exp: Remove `as' and `ld' tag
additions from the invocation of JALR relaxation tests.
There are only n64 linker emulations included with `mips64*-*-openbsd*'
targets, however the unaligned JALX tests insist on running across all
targets and force the n32 ABI, causing link errors with the targets
concerned, e.g.:
./ld-new: tmpdir/unaligned-jalx-0.o: ABI is incompatible with that of the selected emulation
./ld-new: failed to merge target specific data of file tmpdir/unaligned-jalx-0.o
./ld-new: tmpdir/unaligned-insn.o: ABI is incompatible with that of the selected emulation
./ld-new: failed to merge target specific data of file tmpdir/unaligned-insn.o
Convert the tests then to use the per-ABI framework and run them for the
o32 and n32 ABIs, removing these regressions:
mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 0
mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 1
mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 2
mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 3
mips64-openbsd -FAIL: MIPS16 JALX to unaligned symbol 0
mips64-openbsd -FAIL: MIPS16 JALX to unaligned symbol 1
mips64-openbsd -FAIL: microMIPS JALX to unaligned symbol 0
mips64-openbsd -FAIL: microMIPS JALX to unaligned symbol 1
mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 0
mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 1
mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 2
mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 3
mips64el-openbsd -FAIL: MIPS16 JALX to unaligned symbol 0
mips64el-openbsd -FAIL: MIPS16 JALX to unaligned symbol 1
mips64el-openbsd -FAIL: microMIPS JALX to unaligned symbol 0
mips64el-openbsd -FAIL: microMIPS JALX to unaligned symbol 1
Similar tests for the n64 ABI can be added separately, using suitable
dump patterns.
ld/
* testsuite/ld-mips-elf/unaligned-jalx-0.d: Remove `-32' from
the `as' tag.
* testsuite/ld-mips-elf/unaligned-jalx-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-2.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-3.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-mips16-0.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-mips16-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-micromips-0.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-micromips-1.d: Likewise.
* testsuite/ld-mips-elf/mips-elf.exp: Run unaligned JALX tests
with `run_dump_test_o32' and `run_dump_test_n32' rather than
`run_dump_test'.
Compact EH #7 tests use output templates that are not suitable for the
n64 ABI, which `mips64*-*-openbsd*' targets use by default, because the
contents of the sections examined are expected to be differnt. Disable
the tests then, removing these regressions:
mips64-openbsd -FAIL: Compact EH EB #7 with personality id and fallback FDE
mips64-openbsd -FAIL: Compact EH EL #7 with personality id and fallback FDE
mips64el-openbsd -FAIL: Compact EH EB #7 with personality id and fallback FDE
mips64el-openbsd -FAIL: Compact EH EL #7 with personality id and fallback FDE
Suitable corresponding tests for the n64 ABI can be added separately.
gas/
* testsuite/gas/mips/compact-eh-eb-7.d: Exclude for
`mips64*-*-openbsd*'.
* testsuite/gas/mips/compact-eh-el-7.d: Likewise.
In ld/emulparams/elf64bmip-defs.sh there is no explicit handling of the
`.interp' section, which causes it to be positioned in output at an odd
place.
Let's include it with INITIAL_READONLY_SECTIONS, just like o32/n32 do,
fixing a regression from commit 5a8e7be242 ("INITIAL_READONLY_SECTIONS
in elf.sc"), where the handling of n64 was missed due to an unfortunate
sequence of events where ld/emulparams/elf64bmip-defs.sh was only added
with commit 94bb04b3c6 ("Use .reginfo rather than .MIPS.options in n32
linker scripts") the day before.
Add test cases covering section ordering across the three ABIs. This
change also fixes ld/pr23658-2:
FAIL: Build pr23658-2
Co-Authored-By: Maciej W. Rozycki <macro@orcam.me.uk>
ld/ChangeLog:
* emulparams/elf64bmip-defs.sh: Include `.interp' with
INITIAL_READONLY_SECTIONS.
* testsuite/ld-mips-elf/pie-n64.d: Adjust addresses.
* testsuite/ld-mips-elf/sections-1-o32.rd: New test.
* testsuite/ld-mips-elf/sections-1-o32t.rd: New test.
* testsuite/ld-mips-elf/sections-1-n32.rd: New test.
* testsuite/ld-mips-elf/sections-1-n32t.rd: New test.
* testsuite/ld-mips-elf/sections-1-n32p.rd: New test.
* testsuite/ld-mips-elf/sections-1-n64.rd: New test.
* testsuite/ld-mips-elf/sections-1-n64t.rd: New test.
* testsuite/ld-mips-elf/sections-2-o32.rd: New test.
* testsuite/ld-mips-elf/sections-2-o32t.rd: New test.
* testsuite/ld-mips-elf/sections-2-n32.rd: New test.
* testsuite/ld-mips-elf/sections-2-n32t.rd: New test.
* testsuite/ld-mips-elf/sections-2-n32p.rd: New test.
* testsuite/ld-mips-elf/sections-2-n64.rd: New test.
* testsuite/ld-mips-elf/sections-2-n64t.rd: New test.
* testsuite/ld-mips-elf/sections.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
This reverts commit 32f1c80375. It had
two unrelated changes lumped together, one of which changed the meaning
of the `mipsisa64*-*-linux*' target triplets, which was not properly
evaluated.
The empty-address tests check that if a section is removed by ld due
to being empty then properties of that section don't affect following
addresses. The xcoff backend doesn't remove the empty .data section
created by empty-address-2* and empty-address-3* for some reason, and
therefore fails the test.
* testsuite/ld-scripts/empty-address-1.d: Accept more symbols.
* testsuite/ld-scripts/empty-address-2a.d: xfail for xcoff.
* testsuite/ld-scripts/empty-address-2b.d: Likewise.
* testsuite/ld-scripts/empty-address-3a.d: Likewise.
* testsuite/ld-scripts/empty-address-3b.d: Likewise.
This fixes failure of the "extract symbols" test for rs6000, where
--extract-symbols generates a non-zero sized .text. By the look of
coffcode.h the same problem might occur for coff/pe too, but doesn't
happen to trigger a test failure.
bfd/
* coffcode.h (coff_compute_section_file_positions): Don't
adjust size of !SEC_LOAD sections.
binutils/
* objcopy.c (setup_section): Clear SEC_LOAD for --extract-symbol.
The 'Zvkt' extension is listed on the added extensions in the GNU Binutils
version 2.41 (see binutils/NEWS). However, the support of this extension
was actually missing.
This commit adds actual support of this extension and adds implications
from 'Zvkn' and 'Zvks' superset extensions.
bfd/ChangeLog:
* elfxx-riscv.c (riscv_implicit_subsets) Add implications from
'Zvkn' and 'Zvks'. (riscv_supported_std_z_ext): Add 'Zvkt' to
the supported extension list.
In a review [1], I pointed out that applying the patch, git would say:
.git/rebase-apply/patch:147: new blank line at EOF.
However, since the empty line is in target-delegates.c (a generated
file), there's nothing the author can do about it. To avoid this
comment coming up again in the future, change make-target-delegates.py
to avoid the trailing empty line. Do this by making it output empty
lines before each entity, not after.
Since this needs removing a newline output in gdbcopyright, adjust
ada-unicode.py and gdbarch.py to avoid changes in the files they
generate.
[1] https://inbox.sourceware.org/gdb-patches/20230427210113.45380-1-jhb@FreeBSD.org/T/#m083598405bef19157f67c9d97846d3dd90dc7d1c
Change-Id: Ic4c648f06443b432168cb76603402c918aa6e5d2
Approved-By: Tom Tromey <tom@tromey.com>
While looking at the DAP spec, I noticed that the breakpointLocations
request is gated behind a capability. This patch changes gdb to
report this capability.
I've also added a comment to explain the fact that arguments to
breakpointLocations are not optional, even though the spec says they
are.
The canonical form to discard all sections not mentioned earlier in
the script is
/DISCARD/ : { *(*) }
not
/DISCARD/ : { *(.*) }
".*" happens to work with the usual section names starting with a dot,
but let's not promote something not quite right.
Two fixes in gdb.python/py-thread-exited.exp:
- fix the copyright notice validity range (PR testsuite/30687):
2022-202 -> 2022-2023, and
- add missing "require allow_python_tests".
Tested on x86_64-linux.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30687
This little patch makes the BPF assembler accept '#' as an inline
comment character, which clang -S seems to use.
gas/
* config/tc-bpf.c (comment_chars): Add '#'.
* doc/c-bpf.texi (BPF Special Characters): Add note that '#' may
be used for inline comments.
When building gdb with -O2 -fsanitize-threads, I ran into
a Werror=stringop-truncation.
The problem is here in coff_getfilename in coffread.c:
...
strncpy (buffer, aux_entry->x_file.x_n.x_fname, FILNMLEN);
buffer[FILNMLEN] = '\0';
...
The constant FILNMLEN is expected to designate the size of
aux_entry->x_file.x_n.x_fname, but that's no longer the case since commit
60ebc25751 ("Fixes a buffer overflow when compiling assembler for the MinGW
targets.").
Fix this by using "sizeof (aux_entry->x_file.x_n.x_fname)" instead.
Likewise in xcoffread.c.
Tested on x86_64-linux.
Approved-By: Tom Tromey <tom@tromey.com>
PR build/30669
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30669
As reported in PR testsuite/30633, when running test-case
gdb.dwarf2/typeddwarf.exp with target board native-gdbserver on Ubuntu
22.04.2, we run into:
...
(gdb) continue^M
Continuing.^M
^M
Program received signal SIGSEGV, Segmentation fault.^M
0x0000000000000001 in ?? ()^M
(gdb) FAIL: gdb.dwarf2/typeddwarf.exp: runto: run to main
...
We run into the FAIL as follows:
- due to using gdbserver, we attach at the point of the first instruction, in
_start
- we then set a breakpoint at main
- the test-case is a .s file, that has main renamed to _start in the assembly,
but not in the debuginfo
- setting a breakpoint at main sets the breakpoint at the same instruction
we're currently stopped at
- continue doesn't hit the breakpoint, and we return out of _start, which
causes a sigsegv
Note that this is for the amd64 case (using gdb.dwarf2/typeddwarf-amd64.S).
For the i386 case (using gdb.dwarf2/typeddwarf.S), setting a breakpoint in
main sets it one insn after function entry, and consequently the problem does
not occur.
The FAIL is a regression since commit 90cce6c055 ("[gdb/testsuite] Add nopie
in a few test-cases").
Without nopie the executable is PIE, with nopie it's static instead.
In the PIE case, we attach at the point of _start in the dynamic linker, and
consequently we do not skip the breakpoint in main, and also don't run into
the FAIL.
Fix this by:
- removing the -nostdlib setting, and
- renaming _start to main in both .S files.
The change to use -nostdlib and rename main to _start was originally added
in commit 6edba76fe8 (submitted here:
https://sourceware.org/pipermail/gdb-patches/2011-May/082657.html ) , I assume
to fix the problem now fixed by using nopie.
Tested on x86_64-linux.
Reported-By: Simon Marchi <simon.marchi@efficios.com>
Tested-By: Simon Marchi <simon.marchi@efficios.com>
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30633
With CLI, a session defining a command looks like:
...
(gdb) define foo
Type commands for definition of "foo".
End with a line saying just "end".
>bar
>end
(gdb)
...
With TUI however, we get the same secondary prompts, and type the same, but
are left with:
...
(gdb) define foo
Type commands for definition of "foo".
End with a line saying just "end".
(gdb)
...
Fix this by calling tui_inject_newline_into_command_window in
gdb_readline_wrapper_line, as is done in tui_command_line_handler.
Tested on x86_64-linux.
PR tui/30636
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30636
With a gdb build with -O2 -flto=auto and gcc 7.5.0 and test-case
gdb.gdb/python-helper.exp I run into:
...
(outer-gdb) continue^M
Continuing.^M
print 1^M
^M
Thread 1 "xgdb" hit Breakpoint 2, \
_Z11value_printP5valueP7ui_filePK19value_print_options (val=0x22e2590, \
stream=0x1f65480, options=0x7fffffffcdc0) at gdb/valprint.c:1193^M
1193 {^M
(outer-gdb) FAIL: gdb.gdb/python-helper.exp: hit breakpoint in outer gdb
...
This is the "value_print" variant of the problem with "c_print_type" I fixed
in commit 0d332f1112 ("[gdb/testsuite] Fix gdb.gdb/python-helper.exp with -O2
-flto=auto and gcc 7.5.0").
Fix this likewise.
Tested on x86_64-linux.
In gdb/tui/tui-layout.c, we have:
...
static window_types_map known_window_types;
...
and in gdb/python/py-tui.c:
...
/* A global list of all gdbpy_tui_window_maker objects. */
static intrusive_list<gdbpy_tui_window_maker> m_window_maker_list;
};
/* See comment in class declaration above. */
intrusive_list<gdbpy_tui_window_maker>
gdbpy_tui_window_maker::m_window_maker_list;
...
With a gdb build with -O0 or -O2, the static destructor calling order seems to be:
- first gdb/tui/tui-layout.c,
- then gdb/python/py-tui.c.
So when running test-case gdb.python/tui-window-factory.exp, we see the
following order of events:
- the destructor for known_window_types is called, which triggers calling the
destructor for the only element E of m_window_maker_list. The destructor
destroys E, and also removes E from m_window_maker_list, leaving it empty.
- the destructor for m_window_maker_list is called. It's empty, so it's a nop.
However, when building gdb with -O2 -flto=auto, the static destructor calling
order seems to be reversed.
Instead, we have these events:
- the destructor for m_window_maker_list is called. This doesn't destroy it's
only element E, but it does make m_window_maker_list empty.
- the destructor for known_window_types is called, which triggers calling the
destructor for E. An attempt is done to remove E from m_window_maker_list,
but we run into an assertion failure, because the list is empty.
Fix this by checking is_linked () before attempting to remove from
m_window_maker_list, similar to how things were addressed in commit 995a34b177
("Guard against frame.c destructors running before frame-info.c's").
Tested on x86_64-linux.
PR tui/30646
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30646
When running test-case gdb.base/step-over-syscall.exp without glibc debuginfo
installed, I get:
...
(gdb) continue^M
Continuing.^M
^M
Breakpoint 2, 0x00007ffff7d4405e in vfork () from /lib64/libc.so.6^M
(gdb) PASS: gdb.base/step-over-syscall.exp: vfork: displaced=off: \
continue to vfork (1st time)
...
but with glibc debuginfo installed I get instead:
...
(gdb) continue^M
Continuing.^M
^M
Breakpoint 2, 0x00007ffff7d4405e in __libc_vfork () at \
../sysdeps/unix/sysv/linux/x86_64/vfork.S:44^M
44 ENTRY (__vfork)^M
(gdb) FAIL: gdb.base/step-over-syscall.exp: vfork: displaced=off: \
continue to vfork (1st time)
...
The FAIL is due to a mismatch with regexp:
...
"Breakpoint \[0-9\]+, (.* in |__libc_|)$syscall \\(\\).*"
...
because it cannot match both ".* in " and the __libc_ prefix.
Fix this by using instead the regexp:
...
"Breakpoint \[0-9\]+, (.* in )?(__libc_)?$syscall \\(\\).*"
...
Tested on x86_64-linux.
This patch fixes the semantics of the neg and neg32 BPF instructions
in the simulator, and also updates the corresponding tests
accordingly.
Tested in target bpf-unknown-none.
This patch fixes the BPF_INSN_NEGR and BPF_INSN_NEG32R BPF
instructions to not use their source registers.
Tested in bpf-unknown-none.
opcodes/ChangeLog:
2023-07-26 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-opc.c (bpf_opcodes): Fix BPF_INSN_NEGR to not use a src
register.
gas/ChangeLog:
2023-07-26 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/alu.s: The register neg instruction gets only
one argument.
* testsuite/gas/bpf/alu32-be-pseudoc.d: Likewise.
* testsuite/gas/bpf/alu32-pseudoc.d: Likewise.
* testsuite/gas/bpf/alu32-pseudoc.s: Likewise.
* testsuite/gas/bpf/alu-pseudoc.d: Likewise.
* testsuite/gas/bpf/alu-be-pseudoc.d: Likewise.
* testsuite/gas/bpf/alu-pseudoc.s: Likewise.
* testsuite/gas/bpf/alu-be.d: Likewise.
* testsuite/gas/bpf/alu.d: Likewise.
* testsuite/gas/bpf/alu32-be.d: Likewise.
* testsuite/gas/bpf/alu32.d: Likewise.
* testsuite/gas/bpf/alu32.s: Likewise.
* doc/c-bpf.texi (BPF Instructions): Update accordingly.
get_symbol_name currently returns "" for the usual STT_SECTION symbols
generated by gas. That's not very helpful, return the section name.
Demangle local symbols too, fixing an inconsistency in
issue_discarded_error where global symbols are demangled.
* object.cc (Sized_relobj_file::get_symbol_name): Return a
std::string. Return section name for STT_SECTION symbols with
zero st_name. Sanity check st_name, and don't run off the end
of an improperly terminated .strtab. Demangle sym names.
* object.h (Sized_relobj_file::get_symbol_name): Update decl.
* target-reloc.h (issue_discarded_error): Adjust.
* powerpc.cc (Target_powerpc::Relocate::relocate): Report reloc
type and symbol for relocation overflows.
Since the 'Zca' extension is the new base of the compressed instructions,
this commit enables RVC *also* when the 'Zca' extension is enabled
via ".option arch" directive.
gas/ChangeLog:
* config/tc-riscv.c (s_riscv_option): Enable RVC also when the
'Zca' extension is enabled after an ".option arch" directive.
The version 1.0.4-1 of the code size reduction specification clarifies
that 'Zcf' implies 'F' and 'Zcd' implies 'D'.
cf:
<https://github.com/riscv/riscv-code-size-reduction/releases/tag/v1.0.4-1>
This commit adds those implications.
bfd/ChangeLog:
* elfxx-riscv.c (riscv_implicit_subsets): Add two implications,
'Zcf' -> 'F' and 'Zcd' -> 'D'.
gas/ChangeLog:
* testsuite/gas/riscv/march-imply-zcd.d: New test.
* testsuite/gas/riscv/march-imply-zcf.d: New test.
As per:
<https://github.com/riscv/riscv-code-size-reduction/issues/221>,
the 'Zcf' extension does not exist on RV64. This is reflected on the
version 1.0.4-1 of the code size reduction specification:
<https://github.com/riscv/riscv-code-size-reduction/releases/tag/v1.0.4-1>.
This commit prohibits the combination: RV64 (or any ISA with XLEN > 32)
and the 'Zcf' extension.
bfd/ChangeLog:
* elfxx-riscv.c (riscv_parse_check_conflicts): Prohibit
combination of RV64 and 'Zcf'.
gas/ChangeLog:
* testsuite/gas/riscv/march-fail-rv64i_zcf.d: New test.
* testsuite/gas/riscv/march-fail-rv64i_zcf.l: Likewise.
bfd
* peXXigen.c (_bfd_XXi_only_swap_filehdr_out): If inserting a timestamp, use the value held in the SOURCE_DATE_EPOCH environment variable, if it is defined.
binutils
* doc/binutils.texi (objcopy): Document change in behaviour of objcopy's --preserve-dates command line option.
ld
* pe-dll.c (fill_edata): If inserting a timestamp, use the value held in the SOURCE_DATE_EPOCH environment variable, if it is defined.
* ld.texi (--insert-timestamp): Document change in behaviour.
