gas * config/tc-riscv.c (riscv_set_arch): Whitelist the "q" ISA
extension.
(riscv_after_parse_args): Set FLOAT_ABI_QUAD when the Q ISA is
enabled and no other ABI is specified.
include * opcode/riscv-opc.h: Add support for the "q" ISA extension.
opcodes * riscv-opc.c (riscv-opcodes): Add support for the "q" ISA
extension.
* riscv-opcodes/all-opcodes: Likewise.
avrdis_opcode return type is unsigned short, but -1 at the end of
this function is returned. Additionally, print_insn_avr doesn't
handle when -1 (in case of memory error) is returned from
avrdis_opcode.
This patch changes avrdis_opcode returning int indicating the error,
and adds a new argument for instruction we got on success. The
opcode is 16-bit, so I change local variables type to uint16_t,
and include "bfd_stdint.h" as a result. On memory error,
print_insn_avr returns -1, which is a common convention among most
of print_insn_$ARCH functions.
opcodes:
2016-12-29 Yao Qi <yao.qi@linaro.org>
* avr-dis.c: Include "bfd_stdint.h"
(avrdis_opcode): Change return type to int, add argument
insn. Set *INSN on success.
(print_insn_avr): Check return value of avrdis_opcode, and
return -1 on error.
Add ASMACRO instruction support as per the MIPS16e ASE architecture
specifications [1][2], completing MIPS16e instruction set support.
[1] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Section 4.1 "MIPS16e Instruction Descriptions", p. 65
[2] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Section 1.1 "MIPS16e Instruction Descriptions", p. 66
include/
* opcode/mips.h: Document `0', `1', `2', `3', `4' and `s'
operand codes.
opcodes/
* mips16-opc.c (decode_mips16_operand): Add `0', `1', `2', `3',
`4' and `s' operand codes.
(mips16_opcodes): Add "asmacro" entry.
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: Update for
ASMACRO support.
gas/
* testsuite/gas/mips/mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-32@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-64@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-asmacro.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Simplify extended operand handling and only specially process immediates
which require bit shuffling, using the generic operand insertion and
extraction handlers for the '<' (5-bit shift amount) operand code in
particular. Require the least significant bit of all extended operand
forms to be (artificially) set to 0 for their special processing to
trigger.
gas/
* config/tc-mips.c (mips16_immed): Limit `mips16_immed_extend'
use to operands whose LSB position is zero.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Simplify processing of
extended operands.
* mips16-opc.c (decode_mips16_operand): Switch the extended
form of the `<' operand type to LSB position 22.
Replace `0' and `4' operand codes with `.' and `F' respectively to free
up the `0'-`4' consecutive range. No functional change.
gas/
* config/tc-mips.c (mips16_macro_build): Replace `0' and `4'
operand codes with `.' and `F' respectively.
(mips16_macro): Likewise.
include/
* opcode/mips.h: Replace `0' and `4' operand codes with `.' and
`F' respectively.
opcodes/
* mips16-opc.c (decode_mips16_operand): Replace `0' and `4'
operand codes with `.' and `F' respectively.
(mips16_opcodes): Likewise.
Identify non-extensible instructions in the MIPS16 opcode table and
disallow their use with the `.e' instruction size suffix in assembly and
do not interpret any EXTEND prefix present as a part of the instruction
in disassembly.
According to all versions of the MIPS16 ASE specifications the following
instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R,
I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA
and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e
ASE specifications it has been further clarified what was previously
implied, that non-extesiable instructions when preceded with an EXTEND
prefix must cause a Reserved Instruction exception [3][5].
Therefore in the presence of an EXTEND prefix none of these instructions
are supposed to be handled as extended instructions and supporting these
forms in disassembly causes confusion, and in the case of the RRR major
opcode it also clashes with the ASMACRO encoding.
References:
[1] "Product Description, MIPS16 Application-Specific Extension",
Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16
Instruction Set Summary", p. 5
[2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10
[3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39
[4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49
[5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41
[6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51
include/
* opcode/mips.h (INSN2_SHORT_ONLY): New macro.
gas/
* config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix
instruction size override for INSN2_SHORT_ONLY opcode table
entries.
* testsuite/gas/mips/mips16-extend-swap.d: Adjust output.
* testsuite/gas/mips/mips16-macro-e.l: Adjust error messages.
* testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-insn-e.l: New stderr output.
* testsuite/gas/mips/mips16-insn-t.l: New stderr output.
* testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-insn-e.s: New test source.
* testsuite/gas/mips/mips16-insn-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
opcodes/
* mips-dis.c (print_insn_mips16): Disallow EXTEND prefix
matching for INSN2_SHORT_ONLY opcode table entries.
* mips16-opc.c (SH): New macro.
(mips16_opcodes): Set SH in `pinfo2' for non-extensible
instruction entries: "nop", "addu", "and", "break", "cmp",
"daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu",
"drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv",
"dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j",
"jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg",
"not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu",
"srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb",
"seh", "sew", "zeb", "zeh", "zew" and "extend".
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: New test.
* testsuite/binutils-all/mips/mips16-extend-insn.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
Remove special casing for the `6' operand code used for the embedded
trap code of the BREAK and the SDBBP instructions to support supposedly
extended forms of these instructions.
According to all versions of the MIPS16 ASE specifications these
instructions are not extensible [1][2][3][4][5][7][8][10][11], and as
from revision 2.50 of the MIPS16e ASE specifications it has been further
clarified what was previously implied, that non-extesiable instructions
when preceded with an EXTEND prefix must cause a Reserved Instruction
exception [5][6][9][10].
Therefore supposedly extended BREAK and SDBBP instructions do not serve
their purpose anymore as they do not cause a Bp and a Debug exception
respectively and supporting these forms in disassembly only causes
confusion.
References:
[1] "Product Description, MIPS16 Application-Specific Extension",
Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16
Instruction Set Summary", p. 5
[2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10
[3] same, Table 18. "Extendable MIPS16 Instructions", p. 24
[4] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Table 3.8 "MIPS16e Special Instructions", p. 38
[5] same, Section 3.11 "MIPS16e Extensible Instructions, p. 41
[6] same, Table 3.15 "MIPS16e Extensible Instructions", p. 41
[7] same, Table 3.24 "MIPS16e RR Encoding of the Funct Field", p. 49
[8] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Table 1.8 "MIPS16e Special Instructions", p. 39
[9] same, Section 1.11 "MIPS16e Extensible Instructions", p. 42
[10] same, Table 1.15 "MIPS16e Extensible Instructions", pp. 42-43
[11] same, Table 1.24 "MIPS16e RR Encoding of the Funct Field", p. 50
gas/
* config/tc-mips.c (match_mips16_insn): Remove the `6' operand
code special case and its associated comment.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'6'>: Remove extended
encoding support.
Do not allow any explicitly coded EXTEND instruction to be automatically
scheduled into a jump delay slot, as an EXTEND prefix is coupled with
the next regular MIPS16 instruction and therefore swapping it with a
jump would change program's semantics; EXTEND is not architecturally
allowed to be present in a jump delay slot anyway.
opcodes/
* mips16-opc.c (mips16_opcodes): Set NODS in `pinfo' for
"extend".
gas/
* testsuite/gas/mips/mips16-extend-swap.d: New test.
* testsuite/gas/mips/mips16-extend-swap.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
Fix a regression introduced with commit 5e7fc731f8 ("MIPS/opcodes:
Also set disassembler's ASE flags from ELF structures"), further updated
with commit 4df995c771 ("MIPS/opcodes: Also set disassembler's ASE
flags from ELF structures"), and use autoconf to check for the presence
of `bfd_mips_elf_get_abiflags' in BFD.
opcodes/
* mips-dis.c (set_default_mips_dis_options): Use
HAVE_BFD_MIPS_ELF_GET_ABIFLAGS rather than BFD64 to guard the
call to `bfd_mips_elf_get_abiflags'.
* configure.ac: Check for `bfd_mips_elf_get_abiflags' in BFD.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add `libbfd.la'.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.
Instructions like "jal t0, foo" were erroneously creating symbol table
entries for t0 as well as foo, which causes linking problems. Fix by
reordering instruction alternatives so that t0 is first attempted to
be parsed as a register, rather than as a symbol.
* riscv-opc.c (riscv_opcodes): Reorder jal and call entries.
Limit MIPS16 instruction disassembly according to the ISA level and ASE
set selected, as with the regular MIPS and microMIPS instruction sets.
Retain the property of `objdump -m mips:16' disassembling all MIPS16
instructions however, regardless of any ISA level recorded in the binary
examined.
To validate the disassembler use the GAS test suite for its convenience
of running tests across multiple ISAs, even though placing the tests in
the binutils test suite would be more appropriate. Adjust the single
binutils test which depends on 64-bit instruction disassembly to have
the ISA level required actually recorded in the binary examined.
opcodes/
* mips-dis.c (mips_arch_choices): Use ISA_MIPS64 rather than
ISA_MIPS3 as the `isa' selection in the `bfd_mach_mips16' entry.
(print_insn_mips16): Check opcode entries for validity against
the ISA level and ASE set selected.
binutils/
* testsuite/binutils-all/mips/mips16-undecoded.s: Use `.module'
rather than `.set' to set the ISA level.
gas/
* testsuite/gas/mips/mips16-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16e-sub.d: New test.
* testsuite/gas/mips/mips16-64@mips16e-sub.d: New test.
* testsuite/gas/mips/mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-64@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16e-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-sub.s: New test source.
* testsuite/gas/mips/mips16e-sub.s: New test source.
* testsuite/gas/mips/mips16e-64-sub.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Switch to 32-bit MIPS16 opcode table entry interpretation, similar to
how the microMIPS opcode table is handled, for both the `match' and
`mask' fields, removing special casing for JAL and JALX instructions and
their `a' and `i' operand codes throughout, while retaining automatic
processing of extendable opcodes in assembly and disassembly.
In assembly disallow size enforcement suffixes as appropriate: `.t' for
both 32-bit instructions and macros and `.e' for macros only, making
macro handling consistent with the microMIPS instruction set.
In disassembly fully decode EXTEND prefixes prepended to unsupported
instruction encodings (according to the ISA selection) rather than
dumping them as hexadecimal data along with the following instruction,
removing all special casing for the EXTEND prefix and making its
handling rely on its opcode table entry, except where it is considered a
part of an extendable instruction.
include/
* opcode/mips.h (mips_opcode_32bit_p): New inline function.
gas/
* config/tc-mips.c (micromips_insn_length): Use
`mips_opcode_32bit_p'.
(is_size_valid): Adjust description.
(is_size_valid_16): New function.
(validate_mips_insn): Use `mips_opcode_32bit_p' in MIPS16
operand decoding.
(validate_mips16_insn): Remove `a' and `i' operand code special
casing, use `mips_opcode_32bit_p' to determine instruction
width.
(append_insn): Adjust forced MIPS16 instruction size
determination.
(match_mips16_insn): Likewise. Don't shift the instruction's
opcode with the `a' and `i' operand codes. Use
`mips_opcode_32bit_p' in operand decoding.
(match_mips16_insns): Check for forced instruction size's
validity.
(mips16_ip): Don't force instruction size in the `noautoextend'
mode.
* testsuite/gas/mips/mips16-jal-e.d: New test.
* testsuite/gas/mips/mips16-jal-t.d: New test.
* testsuite/gas/mips/mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16-jal-t.l: New stderr output.
* testsuite/gas/mips/mips16-macro-e.l: New stderr output.
* testsuite/gas/mips/mips16-macro-t.l: New stderr output.
* testsuite/gas/mips/mips16-jal-e.s: New test source.
* testsuite/gas/mips/mips16-jal-t.s: New test source.
* testsuite/gas/mips/mips16-macro-e.s: New test source.
* testsuite/gas/mips/mips16-macro-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Always handle `extend' and
`insn' together, with `extend' as the high-order 16 bits.
(match_kind): New enum.
(print_insn_mips16): Rework for 32-bit instruction matching.
Do not dump EXTEND prefixes here.
* mips16-opc.c (mips16_opcodes): Move "extend" entry to the end.
Recode `match' and `mask' fields as 32-bit in absolute "jal" and
"jalx" entries.
binutils/
* testsuite/binutils-all/mips/mips16-extend-noinsn.d: Adjust
test for separate EXTEND prefix disassembly.
Limit the DDIV, DDIVU, DREM, DREMU and DSUBU macros to the MIPS III
rather than MIPS I ISA. These macros expand to machine code sequences
including 64-bit instructions which require a 64-bit ISA. Entries for
those instructions are already correctly marked, however the marking is
ignored if entries are used in the process of macro expansion rather
than directly, making it possible to indirectly produce 64-bit machine
code even when output requested has been limited to a 32-bit ISA.
opcodes/
* mips16-opc.c (mips16_opcodes): Set membership to I3 rather
than I1 for the "ddiv", "ddivu", "drem", "dremu" and "dsubu"
INSN_MACRO entries.
gas/
* testsuite/gas/mips/mips16-macro.l: New list test.
* testsuite/gas/mips/mips.exp: Run the new test.
Limit the `SD ra, offset(sp)' instruction (I64/SDRASP major/minor
opcode) to the MIPS III rather than MIPS I ISA. This is a 64-bit
instruction requiring a 64-bit ISA. This bug has been there since
forever.
opcodes/
* mips16-opc.c (mips16_opcodes): Set membership to I3 rather
than I1 for the SP-relative "sd"/$ra entry (SDRASP minor
opcode).
gas/
* testsuite/gas/mips/mips16-sdrasp.d: New test.
* testsuite/gas/mips/mips16-sdrasp.l: New stderr output.
* testsuite/gas/mips/mips16-sdrasp.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
jalr rd,offset(rs1)
rather than
jalr rd,rs1,offset
This matches the format of other instructions.
* riscv-opc.c (riscv_opcodes): Change jr and jalr to "o(s)"
format.
We've decided to standardize on two flags for RISC-V: "-march" sets the
target architecture (which determines which instructions can be
generated), and "-mabi" sets the target ABI. We needed to rework this
because the old flag set didn't support soft-float or single-float ABIs,
and didn't support an x32-style ABI on RISC-V.
Additionally, we've changed the behavior of the -march flag: it's now a
lot stricter and only parses things we can actually understand.
Additionally, it's now lowercase-only: the rationale is that while the
RISC-V ISA manual specifies that ISA strings are case-insensitive, in
Linux-land things are usually case-sensitive. Since this flag can be
used to determine library paths, we didn't want to bake some
case-insensitivity in there that would case trouble later.
This patch implements these two new flags and removes the old flags that
could conflict with these. There wasn't a RISC-V release before, so we
want to just support a clean flag set.
include/
* elf/riscv.h (EF_RISCV_SOFT_FLOAT): Don't define.
(EF_RISCV_FLOAT_ABI, EF_RISCV_FLOAT_ABI_SOFT): Define.
(EF_RISCV_FLOAT_ABI_SINGLE, EF_RISCV_FLOAT_ABI_DOUBLE): Define.
(EF_RISCV_FLOAT_ABI_QUAD): Define.
bfd/
* elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Use
EF_RISCV_FLOAT_ABI_SOFT instead of EF_RISCV_SOFT_FLOAT.
binutils/
* readelf.c (get_machine_flags): Use
EF_RISCV_FLOAT_ABI_{SOFT,SINGLE,DOBULE,QUAD) instead of
EF_RISCV_{SOFT,HARD}_FLOAT.
gas/
* config/tc-riscv.h (xlen): Delete.
* config/tc-riscv.c (xlen): Make static.
(abi_xlen): New variable.
(options): Replace OPTION_{M32,M64,MSOFT_FLOAT,MHARD_FLOAT,MRVC}
with OPTION_MABI.
(md_longopts): Likewise.
(md_parse_option): Likewise.
(riscv_elf_final_processing): Likewise.
* doc/as.texinfo (Target RISC-V options): Likewise.
* doc/c-riscv.texi (OPTIONS): Likewise.
* config/tc-riscv.c (float_mode): Removed.
(float_abi): New type, specifies the floating-point ABI.
(riscv_set_abi): New function.
(riscv_add_subset): Only allow lower-case ISA names and require
them to start with "rv".
(riscv_after_parse_args): Likewise.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Default to the ELF's
XLEN when none is provided.
This is a mixed bag of format changes:
* Replacing constants with macros (0xffffffff with MINUS_ONE, for
example). There's one technically functional change in here (some
MINUS_ONEs are changed to 0), but it only changes the behavior of an
otherwise-unused field.
* Using 0 instead of 0x0 in the relocation table.
* There were some missing spaces before parens, the spaces have been
added.
* A handful of comments are now more descriptive.
* A bunch of whitespace-only changes, mostly alignment and brace
newlines.
bfd/
* elfnn-riscv.c: Formatting and comment fixes throughout.
* elfxx-riscv.c: Likewise.
(howto_table): Change the src_mask field from MINUS_ONE to 0 for
R_RISCV_TLS_DTPMOD32, R_RISCV_TLS_DTPMOD64, R_RISCV_TLS_DTPREL32,
R_RISCV_TLS_DTPREL64, R_RISCV_TLS_TPREL32, R_RISCV_TLS_TPREL64.
opcodes/
* riscv-opc.c: Formatting fixes.
gas/
* config/tc-riscv.c: Formatting and comment fixes throughout.
Correct commit 640c0ccdc9 ("some objdump -M options, better reg
dumps"), <https://sourceware.org/ml/binutils/2002-12/msg00706.html>, and
only execute code setting up disassembler options based on ELF file
structures if SYMTAB_AVAILABLE is set.
opcodes/
* mips-dis.c (set_default_mips_dis_options) [SYMTAB_AVAILABLE]:
Only examine ELF file structures here.
Complement commit 5e7fc731f8 ("MIPS/opcodes: Also set disassembler's
ASE flags from ELF structures") and fix an `--enable-targets=all' GDB
build regression on 32-bit hosts where the MIPS target is a secondary:
../opcodes/libopcodes.a(mips-dis.o): In function `set_default_mips_dis_options':
mips-dis.c:(.text+0x906): undefined reference to `bfd_mips_elf_get_abiflags'
collect2: error: ld returned 1 exit status
make[2]: *** [gdb] Error 1
by avoiding making a call to the `bfd_mips_elf_get_abiflags' function,
which is not available, because there is no MIPS/ELF BFD included in
32-bit BFD builds. This call is only made from a conditional code block
guarded by a check against `bfd_target_elf_flavour', which is dead in
such a configuration, however cannot be optimized away by the compiler.
Also some other MIPS BFDs may be available, such as a.out, ECOFF or PE,
so the disassembler has to remain functional.
opcodes/
* mips-dis.c (set_default_mips_dis_options) [BFD64]: Only call
`bfd_mips_elf_get_abiflags' here.
Respect any ASE flags recorded in ELF file structures for the purpose of
selecting instructions to be disassembled, preventing code from being
hex-dumped even though having been clearly indicated as valid at the
assembly time. Use date from the MIPS ABI flags structure if present,
and otherwise there may be an MDMX ASE flag set in the ELF file header.
For backwards compatibility only set extra flags and do not clear any,
preserving all previously set by the architecture selected to be
disassembled for.
include/
* elf/mips.h (Elf_Internal_ABIFlags_v0): Also declare struct
typedef as `elf_internal_abiflags_v0'.
bfd/
* bfd-in.h (elf_internal_abiflags_v0): New struct declaration.
(bfd_mips_elf_get_abiflags): New prototype.
* elfxx-mips.c (bfd_mips_elf_get_abiflags): New function.
* bfd-in2.h: Regenerate.
opcodes/
* mips-dis.c (mips_convert_abiflags_ases): New function.
(set_default_mips_dis_options): Also infer ASE flags from ELF
file structures.
binutils/
* testsuite/binutils-all/mips/mips-ase-1.d: New test.
* testsuite/binutils-all/mips/mips-ase-2.d: New test.
* testsuite/binutils-all/mips/mips-ase-3.d: New test.
* testsuite/binutils-all/mips/mips-ase-1.s: New test source.
* testsuite/binutils-all/mips/mips-ase-2.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
Move ELF file header flag interpretation code, used to set disassembler
options, beyond architecture setup. No functional change as the effects
of both code sections are disjoint from each other, but this provides
for a further expansion of ELF file header flag interpretation.
opcodes/
* mips-dis.c (set_default_mips_dis_options): Reorder ELF file
header flag interpretation code.
Fix the annotation of SP-relative SD instructions incorrectly marked as
reading from the PC rather than SP, which in turn prevented their 16-bit
forms from being scheduled into jump delay slots. This bug has been
there since forever.
opcodes/
* mips16-opc.c (mips16_opcodes): Set RD_SP rather than RD_PC in
`pinfo2' with SP-relative "sd" entries.
gas/
* testsuite/gas/mips/mips16-sprel-swap.d: New test.
* testsuite/gas/mips/mips16-sprel-swap.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
Correct the note about JALRC/JRC being compact jumps rather than
branches, and add a reference from where the remaining MIPS16e additions
live and the jumps used to be too, complementing commit ceb94aa50d
("Update insn_mo when converting to a MIPS16e compact jump"),
<https://sourceware.org/ml/binutils/2011-06/msg00369.html>.
opcodes/
* mips16-opc.c (mips16_opcodes): Update comments on MIPS16e
compact jumps.
The internal CN register representation for coprocessor fields used in aarch64
sys, sysl instructions are removed in this patch.
After the change, those fields are represented as immediate. Related checks are
added as well.
opcodes/
* aarch64-opc.c (aarch64_opnd_qualifiers): New CR value range
qualifier.
(operand_general_constraint_met_p): Remove case for CP_REG.
(aarch64_print_operand): Print CRn, CRm operand using imm field.
* aarch64-tbl.h (QL_SYS): Use CR qualifier.
(QL_SYSL): Likewise.
(aarch64_opcode_table): Change CRn, CRm operand class and type.
* aarch64-opc-2.c : Regenerate.
* aarch64-asm-2.c : Likewise.
* aarch64-dis-2.c : Likewise.
include/
* opcode/aarch64.h (aarch64_operand_class): Remove
AARCH64_OPND_CLASS_CP_REG.
(enum aarch64_opnd): Change AARCH64_OPND_Cn to AARCH64_OPND_CRn,
AARCH64_OPND_Cm to AARCH64_OPND_CRm.
(aarch64_opnd_qualifier): Define AARCH64_OPND_QLF_CR qualifier.
gas/
* config/tc-aarch64.c (AARCH64_REG_TYPES): Remove CN register.
(get_reg_expected_msg): Remove CN register case.
(parse_operands): rewrite parser for CRn, CRm operand.
(reg_names): Remove CN register.
* testsuite/gas/aarch64/diagnostic.s: Add a new test case.
* testsuite/gas/aarch64/diagnostic.l: Adjust error message.
Nowadays, memory error in rx disassembly is not handled, so if I
start a fresh GDB, and disassemble,
(gdb) set architecture rx
The target architecture is assumed to be rx
(gdb) disassemble 0x0,+4
Dump of assembler code from 0x0 to 0x4:
0x00000000: brk
0x00000001: brk
0x00000002: brk
0x00000003: brk
the output is wrong. This patch adds code to call dis->memory_error_func
on memory error, and longjmp to print_insn_rx. With this patch applied,
(gdb) set architecture rx
The target architecture is assumed to be rx
(gdb) disassemble 0,+4
Dump of assembler code from 0x0 to 0x4:
0x00000000: Cannot access memory at address 0x0
opcodes:
2016-12-12 Yao Qi <yao.qi@linaro.org>
* rx-dis.c: Include <setjmp.h>
(struct private): New.
(rx_get_byte): Check return value of read_memory_func, and
call memory_error_func and OPCODES_SIGLONGJMP on error.
(print_insn_rx): Call OPCODES_SIGSETJMP.
Nowadays, memory error in rl78 disassembly is not handled, so if I
start a fresh GDB, and disassemble,
(gdb) set architecture rl78
The target architecture is assumed to be rl78
(gdb) disassemble 0x0,+4
Dump of assembler code from 0x0 to 0x4:
0x00000000: nop
0x00000001: nop
0x00000002: nop
0x00000003: nop
the output is wrong. This patch adds code to call dis->memory_error_func
on memory error, and longjmp to print_insn_rl78_common. With this
patch applied,
(gdb) set architecture rl78
The target architecture is assumed to be rl78
(gdb) disassemble 0,+4
Dump of assembler code from 0x0 to 0x4:
0x00000000: Cannot access memory at address 0x0
opcodes:
2016-12-12 Yao Qi <yao.qi@linaro.org>
* rl78-dis.c: Include <setjmp.h>.
(struct private): New.
(rl78_get_byte): Check return value of read_memory_func, and
call memory_error_func and OPCODES_SIGLONGJMP on error.
(print_insn_rl78_common): Call OPCODES_SIGJMP.
This code has never been used throughout the repository history, and
likely not before either, as due to the assymetry of MIPS16 instruction
set encoding there are no 32-bit shift operations having their immediate
shift count placed in the position of the usual `rx' instruction field.
gas/
* config/tc-mips.c (mips16_macro_build) <'>'>: Remove case.
include/
* opcode/mips.h: Remove references to `>' operand code.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'>'>: Remove cases.
Make the `e' operand code used with raw EXTEND instructions use the
hexadecimal rather than decimal format, for consistency with what is
actually produced by code in `print_insn_mips16' dedicated to EXTEND
disassembly. Due to that special handling the operand code is only
interpreted for assembly however, which accepts either format either
way, so there is no functional change here.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'e'>: Use HINT rather
than UINT.
gas/
* testsuite/gas/mips/mips16-extend.d: New test.
* testsuite/gas/mips/mips16-extend.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
Use a tab rather than a space to separate `extend' and its uninterpreted
argument output, like with regular instructions. Separate hexadecimal
halves of undecoded extended instructions output with a space instead of
presenting them concatenated.
opcodes/
* mips-dis.c (print_insn_mips16): Use a tab rather than a space
to separate `extend' and its uninterpreted argument output.
Separate hexadecimal halves of undecoded extended instructions
output.
binutils/
* testsuite/binutils-all/mips/mips16-extend-noinsn.d: New test.
* testsuite/binutils-all/mips/mips16-extend-noinsn.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new test.
Complement commit dd8b7c222e ("MIPS: mips16e jalrc/jrc opcodes"),
<https://sourceware.org/ml/binutils/2005-07/msg00349.html>, and stop the
disassembler making a delay-slot adjustment for PC-relative operations
following either MIPS16e compact jumps, or undefined RR/J(AL)R(C)
encodings that have the `l' (link) and `ra' (source register is `ra')
bits set both at a time. Adjust code description for accuracy. Add a
suitable test case.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Avoid delay-slot
adjustment for PC-relative operations following MIPS16e compact
jumps or undefined RR/J(AL)R(C) encodings.
binutils/
* testsuite/binutils-all/mips/mips16-pcrel.d: New test.
* testsuite/binutils-all/mips/mips16-pcrel.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new test.
Fix a commit c2c4ff8d52 ("[AArch64] Add ARMv8.3 FCMLA and FCADD
instructions") build regression:
cc1: warnings being treated as errors
.../opcodes/aarch64-dis.c: In function 'aarch64_ext_sve_addr_rr_lsl':
.../opcodes/aarch64-dis.c:1324: error: declaration of 'index' shadows a global declaration
/usr/include/string.h:303: error: shadowed declaration is here
make[4]: *** [aarch64-asm.lo] Error 1
in a way following commit 91d6fa6a03 ("Add -Wshadow to the gcc command
line options used when compiling the binutils.").
opcodes/
* aarch64-asm.c (aarch64_ins_reglane): Rename `index' local
variable to `reglane_index'.
I got a report of a gdb crash for vle and further investigation showed an
attempt to disassemble an invalid memory range. I tracked the crash down
to the code in get_powerpc_dialect, where we fail to make sure we have a
valid section pointer before dereferencing it.
There is no such problem for rs6000-based disassembling.
opcodes/ChangeLog:
2016-12-08 Luis Machado <lgustavo@codesourcery.com>
* ppc-dis.c (get_powerpc_dialect): Check NULL info->section.
