bfd/
* mach-o.h (bfd_mach_o_dyld_info_command): Add rebase_content,
bind_content, weak_bind_content, lazy_bind_content,
export_content.
(bfd_mach_o_load_command): Add comments, add next field.
(mach_o_data_struct): Replace commands field by first_command
and last_command.
* mach-o.c (bfd_mach_o_append_command): New function.
(bfd_mach_o_bfd_copy_private_symbol_data): Add blank lines.
(bfd_mach_o_bfd_copy_private_section_data): Check flavour,
copy fields.
(bfd_mach_o_bfd_copy_private_header_data): Copy load commands.
(bfd_mach_o_pad4, bfd_mach_o_pad_command): New functions.
(bfd_mach_o_write_thread): Use macro instead of literal.
(bfd_mach_o_write_dylinker, bfd_mach_o_write_dylib)
(bfd_mach_o_write_main, bfd_mach_o_write_dyld_info): New
functions.
(bfd_mach_o_write_symtab_content): New function (extracted
from bfd_mach_o_write_symtab).
(bfd_mach_o_write_symtab): Split.
(bfd_mach_o_count_indirect_symbols): Move
(bfd_mach_o_build_dysymtab): Remove layout code.
(bfd_mach_o_write_contents): Rewritten to build commands in order.
(bfd_mach_o_count_sections_for_seg): Remove.
(bfd_mach_o_build_obj_seg_command): New function (extracted from
bfd_mach_o_build_seg_command).
(bfd_mach_o_build_exec_seg_command): New function.
(bfd_mach_o_build_dysymtab_command): Remove.
(bfd_mach_o_layout_commands): New function.
(bfd_mach_o_init_segment): New function.
(bfd_mach_o_build_commands): Major rework to handle non-object
files.
(bfd_mach_o_alloc_and_read, bfd_mach_o_read_dyld_content): New
function.
(bfd_mach_o_read_dyld_info): Clear content fields.
(bfd_mach_o_read_segment): Adjust call.
(bfd_mach_o_flatten_sections): Adjust as now load commands are
chained.
(bfd_mach_o_scan_start_address, bfd_mach_o_scan)
(bfd_mach_o_mkobject_init, bfd_mach_o_get_base_address)
(bfd_mach_o_lookup_command, bfd_mach_o_core_fetch_environment):
Likewise.
binutils/
* od-macho.c (dump_section_map): Adjust as load commands
are now chained.
(dump_load_command, dump_section_content): Likewise.
be placed towards the front of local GOT space, while entries addressed
via a 32-bit index are placed towards the rear.
Provided that there are fewer than ~16K local GOT entries addressed via
a 16-bit index in total, this should eliminate any relocation overflows
caused by such GOT entries being allocated beyond the addressable range.
bfd/
* elfxx-mips.c (struct mips_got_info): Delete assigned_gotno
field. Add assigned_low_gotno and assigned_high_gotno fields.
(mips_elf_create_local_got_entry): Update out-of-space condition.
Set index of new GOT entry to assigned_low_gotno if required by
the current relocation, else set it to assigned_high_gotno.
(mips_elf_set_global_gotidx): Replace uses of assigned_gotno
with assigned_low_gotno.
(mips_elf_multi_got): Initialize assigned_low_gotno and
assigned_high_gotno in secondary GOTs. Use assigned_low_gotno
in place of assigned_gotno when handling global GOT entries.
(mips_elf_lay_out_got): Initialize assigned_low_gotno and
assigned_high_gotno.
(_bfd_mips_elf_finish_dynamic_sections): Account for a possible
gap in the middle of local GOT space.
ld/testsuite/
* ld-mips-elf/elf-rel-xgot-n32.d: Update for new GOT layout.
* ld-mips-elf/elf-rel-xgot-n32-embed.d: Likewise.
* ld-mips-elf/elf-rel-xgot-n64.d: Likewise.
* ld-mips-elf/elf-rel-xgot-n64-embed.d: Likewise.
* ld-mips-elf/elf-rel-xgot-n64-linux.d: Likewise.
PR 16846
* elflink.c (_bfd_elf_merge_symbol): Ignore TLS mismatch when
current bfd is a plugin. Don't always set type_change_ok
when old bfd is a plugin.
The AArch64 TLSDESC to IE relaxation code uses a bit mask intended to
ensure that destination register in a relaxed ldr instruction is
always X0. The mask has an off by one error resulting in the most
significant bit of the destination register being retained in the
relaxed instruction. The issue generally appears when the compiler
emits TLS accesses code under high register pressure resulting in a
broken code sequence.
Fuss over bctr in call stubs.
* elf32-ppc.c (BA): Define
(ppc_elf_link_hash_table_create): Correct default_params.
(write_glink_stub): Pad small plt call stub with "ba 0" rather
than "nop" for ppc476_workaround.
(ppc_elf_finish_dynamic_sections): Likewise for branch table
and __glink_PLTresolve. Ensure plt call stub at end of page
doesn't allow fall-thru prefetch.
converts some address expressions into absolute values, but the PE format
only stores absolutes as 32-bits. This is a partial solution which attempts
to convert such absolute values back to section relative ones instead. It
fails for symbols like __image_base and ImageBase__, but it is unclear as to
whether these values are ever actually used by applications.
PR ld/16821
* peXXigen.c (abs_finder): New function.
(_bfd_XXi_swap_sym_out): For absolute symbols with values larger
than 1^32 try to convert them into section relative values
instead.
One last time-stamp. Now none of the doc rules using move-if-change
will run unnecessarily.
* Makefile.am ($(MKDOC)): New rule, depend on chew.stamp. Move
old rule to..
(chew.stamp): ..here.
(DISTCLEANFILES): Move *.stamp..
(MOSTLYCLEANFILES): ..to here.
* Makefile.in: Regenerate.
I got tired of watching chew.c being compiled a dozen or more times
each time I do a binutils build.
* Makefile.am (MKDOC): Use $@ in command.
(aoutx.texi): New rule, depend on aoutx.stamp. Move old rule..
(aoutx.stamp): .. to here. Don't depend on chew.c, depend on MKDOC
and omit recursive MAKE. Use $< in command.
(archive.texi, archures.texi, bfdt.texi, cache.texi, coffcode.texi,
core.texi, elf.texi, elfcode.texi, mmo.texi, format.texi, libbfd.texi,
bfdio.texi, bfdwin.texi, opncls.texi, reloc.texi, section.texi,
syms.texi, targets.texi, init.texi, hash.texi, linker.texi): Similarly.
(DISTCLEANFILES): Remove *.stamp.
* Makefile.in: Regenerate.
I got the ppc476 workaround wrong. bctr (and bctrl) as the last
instruction in a page can hit the icache bug if the preceding mtctr
insn is close by, and the destination is in the first few instructions
on the next page. This scenario can occur with code generated by gcc
to implement switch statements, or in code generated to call by
function pointer.
To prevent the bctr problem it is also necessary to remove other
instructions that otherwise would be safe.
bfd/
* elf32-ppc.c (ppc_elf_relocate_section): Remove bctr from list
of safe ppc476 insns at end of page. Also remove non-branch insns.
Expand comments.
ld/
* emultempl/ppc32elf.em (no_zero_padding, ppc_finish): New functions.
(LDEMUL_FINISH): Define.
The testcase in pr16417 comment #6 produces a map file showing
libpthread.so.0 (write@@GLIBC_2.2.5)
ie. missing the file referencing the symbol.
* elflink.c (_bfd_elf_add_default_symbol): Pass poldbfd when
merging non-default sym.
bfd/
* mach-o-i386.c (bfd_mach_o_i386_swap_reloc_out): Use target index
of output_section.
* mach-o-x86-64.c (bfd_mach_o_x86_64_swap_reloc_out): Ditto.
section before dereferencing.
(pe_print_idata, pe_print_edata, pe_print_reloc)
(rsrc_print_section): Don't bother interpreting the contents
of sections which have no contents.
long type instead of long long meant that bfd_seek (SET) could be called with a
negative offset.
PR ld/16803
* elf.c (_bfd_elf_set_section_contents): Use correct type to hold
file position.
