PR 27411
* config/tc-arm.c (do_t_add_sub): Correct error message.
* testsuite/gas/arm/pr27411.s: New test.
* testsuite/gas/arm/pr27411.d: New test driver.
* testsuite/gas/arm/pr27411.l: Expected error output for new test.
A number of targets, bfin, rl78, rx, can show odd failures when
bfd/reloc.c changes BFD_RELOC_* enum values, if recompiling over a
build dir with existing objects. The problem is caused by
bfin-parse.o and similar not being recompiled and so using stale
BFD_RELOC_* values. This isn't fixed by making bfin-parse.c depend on
bfd/reloc.c, which isn't necessary anyway. bfin-parse.o should have
been recompiled due to bfd/bfd.h changing when extracted bfd/reloc.c
BFD_RELOC_* values change, but that wasn't happening. The problem is
that automake generates a makefile that loads gas/config/.deps/
dependency file for objects with corresponding sources mentioned in
EXTRA_as_new_SOURCES. Unless we want to mess around generating
explicit dependencies, I think that mean moving some object files to
the build gas/config/. This patch does that, removing some hacks for
m68k-parse.c that should no longer be necessary, and removes some
rules that catered to old bison producing code that triggers compiler
warnings.
PR 23691
* Makefile.am (TARGET_CPU_CFILES): Split off config/xtensa-relax.c..
(TARGET_CPU_HFILES): ..and config/xtensa-relax.h..
(TARGET_EXTRA_FILES): ..to here. Add config/bfin-lex-wrapper.c,
and use alongside TARGET_CPU_CFILES.
(EXTRA_DIST): Update location of generated .c files.
(config/m68k-parse.c): New rule replacing m68k-parse.c rule.
(config/bfin-parse.c, config/rl78-parse.cm config/rx-parse.c),
(config/bfin-lex.c, config/bfin-lex-wrapper.@OBJEXT@): Similarly.
(itbl-lex-wrapper.@OBJEXT@): Simplify to just the needed
dependencies.
(itbl-parse.@OBJEXT@): Delete rule using NO_WERROR.
(itbl-parse.c, itbl-parse.h): Tidy.
* config/bfin-lex-wrapper.c: Include config/bfin-lex.c.
* config/bfin-lex.l: Include config/bfin-parse.h.
* configure.ac (extra_objects): Move object files corresponding
to .y and .l files now in config/ to config/.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
Make the opcode/riscv-opc.c and include/opcode/riscv.h tidy, move the
spec versions stuff to bfd/cpu-riscv.h. Also move the csr stuff and
ext_version_table to gas/config/tc-riscv.c for internal use. To avoid
too many repeated code, define general RISCV_GET_SPEC_NAME/SPEC_CLASS
macros. Therefore, assembler/dis-assembler/linker/gdb can get all spec
versions related stuff from cpu-riscv.h and cpu-riscv.c, since the stuff
are defined there uniformly.
bfd/
* Makefile.am: Added cpu-riscv.h.
* Makefile.in: Regenerated.
* po/SRC-POTFILES.in: Regenerated.
* cpu-riscv.h: Added to support spec versions controlling.
Also added extern arrays and functions for cpu-riscv.c.
(enum riscv_spec_class): Define all spec classes here uniformly.
(struct riscv_spec): Added for all specs.
(RISCV_GET_SPEC_CLASS): Added to reduce repeated code.
(RISCV_GET_SPEC_NAME): Likewise.
(RISCV_GET_ISA_SPEC_CLASS): Added to get ISA spec class.
(RISCV_GET_PRIV_SPEC_CLASS): Added to get privileged spec class.
(RISCV_GET_PRIV_SPEC_NAME): Added to get privileged spec name.
* cpu-riscv.c (struct priv_spec_t): Replaced with struct riscv_spec.
(riscv_get_priv_spec_class): Replaced with RISCV_GET_PRIV_SPEC_CLASS.
(riscv_get_priv_spec_name): Replaced with RISCV_GET_PRIV_SPEC_NAME.
(riscv_priv_specs): Moved below.
(riscv_get_priv_spec_class_from_numbers): Likewise, updated.
(riscv_isa_specs): Moved from include/opcode/riscv.h.
* elfnn-riscv.c: Included cpu-riscv.h.
(riscv_merge_attributes): Initialize in_priv_spec and out_priv_spec.
* elfxx-riscv.c: Included cpu-riscv.h and opcode/riscv.h.
(RISCV_UNKNOWN_VERSION): Moved from include/opcode/riscv.h.
* elfxx-riscv.h: Removed extern functions to cpu-riscv.h.
gas/
* config/tc-riscv.c: Included cpu-riscv.h.
(enum riscv_csr_clas): Moved from include/opcode/riscv.h.
(struct riscv_csr_extra): Likewise.
(struct riscv_ext_version): Likewise.
(ext_version_table): Moved from opcodes/riscv-opc.c.
(default_isa_spec): Updated type to riscv_spec_class.
(default_priv_spec): Likewise.
(riscv_set_default_isa_spec): Updated.
(init_ext_version_hash): Likewise.
(riscv_init_csr_hash): Likewise, also fixed indent.
include/
* opcode/riscv.h: Moved stuff and make the file tidy.
opcodes/
* riscv-dis.c: Included cpu-riscv.h, and removed elfxx-riscv.h.
(default_priv_spec): Updated type to riscv_spec_class.
(parse_riscv_dis_option): Updated.
* riscv-opc.c: Moved stuff and make the file tidy.
Since SHF_GNU_RETAIN is allowed on all sections, strip SHF_GNU_RETAIN
when checking incorrect section attributes.
PR gas/27412
* config/obj-elf.c (obj_elf_change_section): Strip SHF_GNU_RETAIN
when checking incorrect section attributes.
* testsuite/gas/elf/elf.exp: Run section28 and section29.
* testsuite/gas/elf/section28.d: New file.
* testsuite/gas/elf/section28.s: Likewise.
* testsuite/gas/elf/section29.d: Likewise.
* testsuite/gas/elf/section29.s: Likewise.
CVTPI2PD with a memory operand, unlike CVTPI2PS, doesn't engage MMX
logic. Therefore it
- has a proper AVX equivalent (CVTDQ2PD) and hence can be subject to
SSE2AVX translation and SSE checking,
- should not record MMX use in the respective ELF note.
This undoes a change to md_assemble() that 32930e4edb ("x86: Support
GNU_PROPERTY_X86_ISA_1_V[234] marker") did without any explanation. This
broke a CVTPI2PS property test that a subsequent test will add, and the
updates to existing tests also demonstrate what was wrong: For example,
AVX insns update the full YMM, even if a Vex128 variant is in use.
VZERO{ALL,UPPER} modify YMM registers despite having no operands.
While {,V}{LD,ST}MXCSR don't modify XMM registers, MXCSR and XMMn
collectively form underlying machine state.
opcodes/
* s390-mkopc.c (main): Accept arch14 as cpu string.
* s390-opc.txt: Add new arch14 instructions.
include/
* opcode/s390.h (enum s390_opcode_cpu_val): Add
S390_OPCODE_ARCH14.
gas/
* config/tc-s390.c (s390_parse_cpu): New entry for arch14.
* doc/c-s390.texi: Document arch14 march option.
* testsuite/gas/s390/s390.exp: Run the arch14 related tests.
* testsuite/gas/s390/zarch-arch14.d: New test.
* testsuite/gas/s390/zarch-arch14.s: New test.
* configure.ac (follow-debug-links): Add option to enable or
disable the following of debug links by default. Set the
default for the option to be 'follow'.
* dwarf.c (do_follow_links): Initialise with DEFAULT_FOR_FOLLOW_LINKS.
(dwarf_select_sections_by_names): Add no-follow-links option.
(dwarf_select_sections_by_letter): Add 'N' option.
* objdump.c (usage): Add conditional text describing the
follow links option.
(slurp_symtab): Ensure that there is a NULL entry at the end
of the symbol table.
(slurp_dynamic_symtab): Likewise.
(dump_bfd): When extending the symbol table, ensure that there
is still a NULL entry at the end.
* readelf.c (usage): Add conditional text describing the
follow links option.
* doc/binutils.texi: Update documentation for objcopy and
readelf.
* doc/debug.options.texi: Update documentation of the
follow-links option.
* config.in: Regenerate.
* configure: Regenerate.
* testsuite/binutils-all/compress.exp: Add the -WN option to
objdump command lines that are not expecting to follow links.
* testsuite/binutils-all/readelf.exp: Add the
--debug-dump=no-follow-links option to tests that are not
expecting to follow debug links.
gas * testsuite/gas/mach-o/sections-1.d: Stop automatic debug link
following.
* testsuite/gas/xgate/insns-dwarf2.d: Likewise.
ld * testsuite/ld-elf/sec64k.exp: Stop readelf from automatically
following debug links.
Some hppa gas targets treat anything starting in the first column as a
label, so directives can't start there. Also, binutils_assemble and
run_dump_test cleverly edit test source to suit the hppa .comm
directive which has a different syntax to most targets. The editing
means we can't match source file names in dumps. Finally, hppa gas
complains if instructions are emitted without a ".text" or similar
directive.
* testsuite/gas/all/pr27381.err: Don't match source file name.
* testsuite/gas/all/pr27381.s: Don't start directive in first column.
* testsuite/gas/all/pr27384.err: Don't match source file name.
Adjust line number.
* testsuite/gas/all/pr27384.s: Add ".text" directive.
* testsuite/gas/elf/pr27355.err: Don't match source file name.
PR 27381
* read.c (s_incbin): Check that the file to be included is a
regular, non-directory file.
* testsuite/gas/all/pr27381.s: New test source file.
* testsuite/gas/all/pr27381.d: New test control file.
* testsuite/gas/all/pr27381.err: Expected error output for the new test.
* testsuite/gas/all/gas.exp: Run the new test.
PR 27384
* listing.c (listing_psize): Check the result of the width
expression before assigning it to paper_width.
* testsuite/gas/all/pr27384.s: New test source file.
* testsuite/gas/all/pr27384.d: New test control file.
* testsuite/gas/all/pr27384.err: Expected errors from new test.
* testsuite/gas/all/gas.exp: Run the new test.
PR 27355
* testsuite/gas/elf/pr27355.s: New test source file.
* testsuite/gas/elf/pr27355.d: New test control file.
* testsuite/gas/elf/pr27355.err: Expected errors from new test.
* testsuite/gas/elf/elf.exp: Run the new test.
GCC 11 passes --gdwarf-5 to assembler to enable DWARF5 debug info. Don't
disable relaxation when --gdwarf-N is specified. The assembler generated
debug information will treat the sequence of the relaxed instructions as
a single instruction.
PR gas/27243
* config/tc-nios2.c (md_begin): Don't disable relaxation with
--gdwarf-N.
* testsuite/gas/nios2/relax.d: New file.
* testsuite/gas/nios2/relax.s: Likewise.
This replaces skip and notarget in a number of gas tests with xfail,
the idea being that running tests might expose segmentation faults or
other serious errors even when we don't expect a test to pass. Doing
so showed a number of cases where tests now pass, which is another
reason to avoid profligate use of notarget and skip.
* testsuite/gas/all/local-label-overflow.d: Use xfail rather than
notarget all except hppa. Comment.
* testsuite/gas/all/sleb128-2.d: Use xfail rather than notarget.
* testsuite/gas/all/sleb128-4.d: Likewise. Don't skip msp430.
* testsuite/gas/all/sleb128-5.d: Use xfail rather than notarget.
* testsuite/gas/all/sleb128-7.d: Likewise.
* testsuite/gas/all/sleb128-9.d: Likewise.
* testsuite/gas/elf/bignums.d: Likewise.
* testsuite/gas/elf/group0c.d: Likewise.
* testsuite/gas/elf/group1a.d: Likewise.
* testsuite/gas/elf/section-symbol-redef.d: Likewise.
* testsuite/gas/elf/section15.d: Likewise.
* testsuite/gas/elf/section4.d: Likewise.
* testsuite/gas/elf/section7.d: Likewise.
* testsuite/gas/macros/irp.d: Likewise.
* testsuite/gas/macros/repeat.d: Likewise.
* testsuite/gas/macros/rept.d: Likewise.
* testsuite/gas/macros/test2.d: Likewise.
* testsuite/gas/macros/vararg.d: Likewise.
* testsuite/gas/all/string.d: Use xfail rather than skip.
* testsuite/gas/elf/missing-build-notes.d: Likewise.
* testsuite/gas/elf/section0.d: Likewise.
* testsuite/gas/elf/section1.d: Likewise.
* testsuite/gas/elf/section10.d: Likewise.
* testsuite/gas/elf/section11.d: Likewise.
* testsuite/gas/elf/section6.d: Likewise.
* testsuite/gas/elf/symtab.d: Use xfail rather than skip, adjust hppa.
* testsuite/gas/elf/symtab.s: Don't start directives in first column.
* testsuite/gas/macros/test3.d: Don't notarget nds32.
skip *-*-* is a little silly, delete the test.
* testsuite/gas/all/byte.d,
* testsuite/gas/all/byte.l,
* testsuite/gas/all/byte.s: Delete.
* testsuite/gas/all/gas.exp: Don't run byte test.
This failed on ft32, hppa, and mips-irix targets. In the case of ft32
the problem was iterating over an array in reverse and not using the
proper condition, so BFD_RELOC_NONE was not recognised.
bfd/
* elf32-ft32.c (ft32_reloc_type_lookup): Don't miss ft32_reloc_map[0].
gas/
PR 27282
* testsuite/gas/all/none.d: Replace skip with xfail, don't xfail ft32.
* testsuite/gas/elf/pr27228.d: xfail hppa and allow OBJECT match.
Local symbols are of course supposed to be defined by their object
file, but in other cases a local symbol is promoted to global by gas
if undefined and referenced. This patch stops gas wrongly replacing a
local undefined symbol with the undefined section symbol, resulting in
a .reloc undefined local symbol being emitted as global.
PR 27228
* write.c (resolve_reloc_expr_symbols): Don't assume local symbol
is defined.
PR 27221
* dwarf2dbg.c (dwarf2_gen_line_info_1): Don't warn about ignored
line number info when gas is generating it.
* testsuite/gas/elf/dwarf2-20.d: Adjust to not expect warnings.
* testsuite/gas/m68hc11/indexed12.d: Likewise.
* testsuite/gas/elf/elf.exp: Don't run warn-2.
* gas/testsuite/gas/elf/warn-2.s: Delete.
Currently
$ as -o x.o x.s
fails when x.s contains DWARF5 ".file 0" or ".loc 0" directives. Update
assembler to automatically enable DWARF5 support so that
$ gcc -S -g -c x.c
$ gcc -c x.s
works.
PR gas/27195
* dwarf2dbg.c (dwarf2_gen_line_info): Set dwarf_level to 5 if
needed.
(dwarf2_directive_filename): Likewise.
(dwarf2_directive_loc): Likewise.
* testsuite/gas/elf/dwarf-5-file0.d: Pass --gdwarf-3.
* testsuite/gas/lns/lns-diag-1.l: Remove the
"Error: file number less than one" errors.
Fix a NULL dereference seen when assembling invalid input.
PR 27198
* config/tc-i386.c (need_plt32_p): Return FALSE for NULL symbol.
* testsuite/gas/i386/pr27198.d,
* gas/testsuite/gas/i386/pr27198.err,
* gas/testsuite/gas/i386/pr27198.s: New test.
* gas/testsuite/gas/i386/i386.exp: Run it.
bfd/
* elfnn-riscv.c: Indent, labels and GNU coding standards tidy,
also aligned the code.
gas/
* config/tc-riscv.c: Indent and GNU coding standards tidy,
also aligned the code.
* config/tc-riscv.h: Likewise.
include/
* opcode/riscv.h: Indent and GNU coding standards tidy,
also aligned the code.
opcodes/
* riscv-opc.c (riscv_gpr_names_abi): Aligned the code.
(riscv_fpr_names_abi): Likewise.
(riscv_opcodes): Likewise.
(riscv_insn_types): Likewise.
Error and warning messages usually starting with lower case letter,
and without the period at the end. Besides, add the prefixed "internel:"
at the beginning of the messages when they are caused internally.
Also fix indents and typos.
bfd/
* elfnn-riscv.c (riscv_merge_attributes): Fix typos of messages.
gas/
* config/tc-riscv.c: Error and warning messages tidy.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Updated.
* testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-read-only-02.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
ld/
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-01.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-05.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-06.d: Likewise.
opcodes/
* riscv-dis.c (parse_riscv_dis_option): Fix typos of message.
The GNU coding standards said the comments should be complete sentences
and end with a period and two spaces. But sometimes it should be more
cleaner when the comments only include a word or codes. Therefore, I made
the following changes after referring to other target/generic codes,
* Try to write sentences in comments, must end with a period and two spaces.
* End with two spaces without a period for codes/instructions only.
* End with one space without a period for a single word/variable only.
Besids, also rewrite/remove some comments which are obsolete or too long,
and fix indents for comments.
bfd/
* elfnn-riscv.c: Comments tidy and improvement.
* elfxx-riscv.c: Likewise.
* elfxx-riscv.h: Likewise.
gas/
* config/tc-riscv.c: Comments tidy and improvement. Also update
comment "fallthru" to "Fall through" that end with a period and
two spaces.
include/
* elf/riscv.h: Comments tidy and improvement.
* opcode/riscv-opc.h: Likewise.
* opcode/riscv.h: Likewise.
opcodes/
* riscv-dis.c: Comments tidy and improvement.
* riscv-opc.c: Likewise.
The makefile has comments about old versions of bison/yacc generating
warnings, but that doesn't apply to the lexer which comes from flex.
As far as I can tell, the warnings in the Blackfin lexer can be fixed
with defines that have been supported back through flex in 2002. So
lets turn on -Werror for it and see if anyone notices. If they do,
they can report their exact tool versions so we can record that here.
