Commit Graph

39 Commits

Author SHA1 Message Date
Stan Shebs
c906108c21 Initial creation of sourceware repository 1999-04-16 01:35:26 +00:00
Stan Shebs
071ea11e85 Initial creation of sourceware repository 1999-04-16 01:34:07 +00:00
Stan Shebs
6d2743e5ec 1998-12-14 J.T. Conklin <jtc@redbacknetworks.com>
* config/i386/nbsd.mh, config/m68k/nbsd.mh, config/ns32k/nbsd.mh
	(XDEPFILES): Add ser-tcp.o.
1998-12-14 23:42:19 +00:00
Andrew Cagney
3a0c96a996 CARP:
Rewrite INNER_THAN so that it takes parameters.
1998-11-28 22:53:04 +00:00
Andrew Cagney
679ce73102 CARP: Delete ABOUT_TO_RETURN across all targets. 1998-11-26 11:13:01 +00:00
Jason Molenda
3dcac15f1f Wed Apr 1 16:30:49 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
* ns32k-tdep.c (flip_bytes, ns32k_localcount,
        ns32k_get_enter_addr, sign_extend): Restore functions mysteriously
        deleted.

        * ns32knbsd-nat.c: New (?) file to support fetching and storing
        registers on NetBSD hosts.

        * nbsd.mh (NATDEPFILES): put ns32knbsd-nat.o instead of
        ns32k-nat.o

        * ns32km3-nat.c (reg_offset): Get order of floating point
        registers correct. Add extra 32382 register offsets.
        (REG_ADDRESS): define to point at correct part of thread
        state. Use calls to "warning" instead of "message".

        * tm-nbsd.h, tm-ns32km3.h (REGISTER_NAMES, NUM_REGS,
        REGISTER_BYTES, REGISTER_BYTE): redefine allowing for 32382
        fpu registers.
1998-04-02 01:01:35 +00:00
Fred Fish
0728afad48 * configure.in (--with-mmalloc): Add new configure arg to use the
mmalloc package.  Default is to not use it.
	(START_INFERIOR_TRAPS_EXPECTED): Define to the integer 2, not
	the string "2".
	* acconfig.h (USE_MMALLOC, FORCE_MMCHECK): Add #undef.
	* configure: Regenerated.
	* config.in: Regenerated.
	* Makefile.in (MMALLOC_DIR, MMALLOC_SRC): Remove.
	(MMALLOC): Set using configure.
	(MMALLOC_CFLAGS): Set using configure.
	* config/i386/tm-linux.h (sys_quotactl): Define to 1 rather
	than just defining it.
	* mpw-make.sed: Undefine USE_MMALLOC rather than defining NO_MMALLOC.
	* utils.c (NO_MMALLOC): Use USE_MMALLOC instead.
	* objfiles.c: ditto.
	* defs.h: ditto.
	* config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Remove.
	* config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Remove.
	* config/i386/cygwin32.mh (MMALLOC_CFLAGS): Remove.
	* config/alpha/alpha-osf3.mh (MMALLOC_CFLAGS): Remove.
	* config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Remove.
	* gdbserver/Makefile.in (MMALLOC_*): Remove.
	* config/rs6000/rs6000.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
	* config/rs6000/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
	* config/powerpc/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
	* config/powerpc/aix.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
	* config/ns32k/ns32km3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
	* config/mips/mipsm3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
	* config/mips/decstation.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
	* config/m88k/cxux.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
	* config/i386/xm-windows.h (NO_MMALLOC, NO_MMCHECK): Remove.
	* config/i386/i386mk.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
	* config/i386/i386m3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
	* config/i386/i386gnu.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
	* config/alpha/alpha-osf1.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
	* config/alpha/alpha-linux.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
1998-01-14 04:28:29 +00:00
Fred Fish
ed393c169b See the huge ChangeLog entry that has the header:
Thu Jul 25 19:41:31 1996  Fred Fish  <fnf@cygnus.com>

for details about these changes.  I was going to include the complete
entry in the checkin message but it was apparently so large it caused
cvs to dump core.
1996-07-26 04:12:12 +00:00
Fred Fish
5410991408 * Makefile.in (MMALLOC_CFLAGS): Eliminate intermediate MMALLOC_DISABLE
and MMALLOC_CHECK macros, and add comment indicating how host dependent
	makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or
	to use it but to not do heap corruption checking.
	* gdbserver/Makefile.in: Ditto.
	* utils.c (init_malloc): Replace warning() use with direct call of
	fprintf_unfiltered, since current_target has not yet been set and thus
 	we cannot use warning().  If we try to use mmcheck and it fails,
	suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE
 	defined.  Other small mmalloc related cleanups.
	* config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
	* config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK.

	* config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
	* config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
	* config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
	* config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
	* config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT);
	* config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
	* config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
	* config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
	Remove obsolete defines.

	* config/alpha/alpha-linux.mh (MMALLOC_DISABLE):
	* config/alpha/alpha-osf1.mh (MMALLOC_DISABLE):
	* config/rs6000/rs6000.mh (MMALLOC_DISABLE):
	* config/rs6000/aix4.mh (MMALLOC_DISABLE):
	* config/powerpc/aix4.mh (MMALLOC_DISABLE):
	* config/powerpc/aix.mh (MMALLOC_DISABLE):
	* config/ns32k/ns32km3.mh (MMALLOC_DISABLE):
	* config/mips/mipsm3.mh (MMALLOC_DISABLE):
	* config/mips/decstation.mh (MMALLOC_DISABLE):
	* config/m88k/cxux.mh (MMALLOC_DISABLE):
	* config/i386/i386mk.mh (MMALLOC_DISABLE):
	* config/i386/i386m3.mh (MMALLOC_DISABLE):
	* config/i386/i386gnu.mh (MMALLOC_DISABLE):
	Use MMALLOC_CFLAGS instead.
1996-07-11 07:41:51 +00:00
J.T. Conklin
eb224848cd * config/{i386,ns32k}/nbsd.mh (NATDEPFILES): Remove core-aout.o. 1996-02-21 02:00:10 +00:00
Fred Fish
a1df8e780c * coredep.c: Renamed to core-aout.c
* core-svr4.c: Renamed to core-regset.c
	* Makefile.in (ALLDEPFILES): Account for renamings.
	* corelow.c (core_file_fns): Add, points to chain of structs.
	(add_core_fns): New function to build chain of structs.
	(get_core_registers): Modify to search core functions chain and call
 	appropriate fetch_core_registers function based on core file flavour.
	* gdbcore.h (fetch_core_registers):  Remove declaration.
	(struct core_fns): Define struct for core function info.
	* i386m3-nat.c: Update comment for filename change (coredep->core-aout)
	* a68v-nat.c (fetch_core_registers): Remove stub, not needed now.
	* alpha-nat.c (fetch_core_registers): Make static.
	(alpha_core_fns, _initialize_core_alpha): New struct and func.
	* core-aout.c (fetch_core_registers): Make static
	(aout_core_fns, _initialize_core_aout): New struct and func.
	* core-regset.c (fetch_core_registers): Make static.
	(regset_core_fns, _initialize_core_regset): New struct and func.
	* core-sol2.c (fetch_core_registers): Make static.
	(solaris_core_fns, _initialize_core_solaris): New struct and func.
	* hp300ux-nat.c (fetch_core_registers): Make static.
	(hp300ux_core_fns, _initialize_core_hp300ux): New struct and func.
	* i386aix-nat.c (fetch_core_registers): Make static.
	(i386aix_core_fns, _initialize_core_i386aix): New struct and func.
	* i386mach-nat.c (fetch_core_registers: Make static.
	(i386mach_core_fns, _initialize_core_i386mach): New struct and func.
	* irix4-nat.c (fetch_core_registers): Make static.
	(irix4_core_fns, _initialize_core_irix4): New struct and func.
	* irix5-nat.c (fetch_core_registers):
	(irix5_core_fns, _initialize_core_irix5): New struct and func.
	* lynx-nat.c (fetch_core_registers): Make static.
	(lynx_core_fns, _initialize_core_lynx): New struct and func.
	* mips-nat.c (fetch_core_registers): Make static.
	(mips_core_fns, _initialize_core_mips): New struct and func.
	* ns32km3-nat.c (fetch_core_registers): Remove stub.
	* rs6000-nat.c (fetch_core_registers): Make static.
	(rs6000_core_fns, _initialize_core_rs6000): New struct and func.
	* sparc-nat.c (fetch_core_registers): Make static.
	(sparc_core_fns, _initialize_core_sparc): New struct and func.
	* sun3-nat.c (fetch_core_registers):
	(sun3_core_fns, _initialize_core_sun3): New struct and func.
	* sun386-nat.c (fetch_core_registers): Remove stub.
	* ultra3-nat.c (fetch_core_registers): Make static.
	(ultra3_core_fns, _initialize_core_ultra3): New struct and func.
	* config/gould/pn.mh (XDEPFILES),
 	config/i386/fbsd.mh (NATDEPFILES),
	config/i386/i386bsd.mh (NATDEPFILES),
 	config/i386/i386m3.mh (XDEPFILES),
	config/i386/i386sco.mh (NATDEPFILES),
	config/i386/i386sco4.mh (NATDEPFILES),
	config/i386/i386v.mh (NATDEPFILES),
	config/i386/i386v32.mh (NATDEPFILES),
	config/i386/nbsd.mh (NATDEPFILES),
	config/i386/ptx.mh (XDEPFILES),
	config/i386/ptx4.mh (XDEPFILES),
	config/i386/symmetry.mh (NATDEPFILES),
	config/m68k/3b1.mh (XDEPFILES),
	config/m68k/cisco.mt (TDEPFILES),
	config/m68k/delta68.mh (NATDEPFILES),
	config/m68k/dpx2.mh (NATDEPFILES),
	config/m68k/hp300bsd.mh (NATDEPFILES),
	config/m68k/hp300hpux.mh (NATDEPFILES),
	config/m68k/isi.mh (XDEPFILES),
	config/m68k/news.mh (NATDEPFILES),
	config/m68k/news1000.mh (XDEPFILES),
	config/m88k/cxux.mh (NATDEPFILES),
	config/m88k/delta88.mh (NATDEPFILES),
	config/mips/littlemips.mh (XDEPFILES),
	config/mips/mipsm3.mh (XDEPFILES),
	config/ns32k/merlin.mh (XDEPFILES),
	config/ns32k/nbsd.mh (NATDEPFILES),
	config/ns32k/ns32km3.mh (NATDEPFILES),
	config/pa/hppabsd.mh (NATDEPFILES),
	config/pa/hppahpux.mh (NATDEPFILES),
	config/romp/rtbsd.mh (XDEPFILES),
	config/tahoe/tahoe.mh (XDEPFILES),
	config/vax/vaxbsd.mh (XDEPFILES),
	config/vax/vaxult.mh (NATDEPFILES),
	config/vax/vaxult2.mh (NATDEPFILES),
	Account for coredep.o to core-aout.o name change.
	* config/i386/i386dgux (NATDEPFILES),
	config/i386/i386sol2.mh (NATDEPFILES),
	config/i386/i386v4.mh (NATDEPFILES),
	config/i386/linux.mh (NATDEPFILES),
	config/i386/ncr3000.mh (NATDEPFILES),
	config/m68k/m68kv4.mh (NATDEPFILES),
	config/m88k/delta88v4.mh (NATDEPFILES),
	config/mips/mipsv4.mh (NATDEPFILES),
	Account for core-svr4.o to core-regset.o name change.
1996-01-11 20:08:15 +00:00
Fred Fish
6c9638b444 Update FSF address. 1995-08-02 03:41:12 +00:00
J.T. Conklin
eba0864375 * monitor.c (monitor_printf): Changed format specification in
error message to work with pre-ansi compilers.
  (monitor_load_srec): reduced length of s-records from 128 to 32
  bytes so download is more reliable with the rom68k monitor.

* rom68k-rom.c: Added trailing space to prompt string.

* config/i386/xm-i386sco.h (HAVE_STRSTR): Removed.
* config/i386/xm-go32.h, mswin/xm.h (SYS_SIGLIST_MISSING):
  Removed.
* defs.h, config/{xm-lynx.h, xm-nbsd.h},
  config/i386/{xm-i386bsd.h, xm-linux.h},
  config/m68k/xm-hp300bsd.h, config/mips/xm-irix4.h,
  config/ns32k/xm-ns32km3.h, doc/gdbint.texinfo
  (PSIGNAL_IN_SIGNAL_H): Removed.
1995-05-17 23:13:26 +00:00
Stan Shebs
dbd9bcaa8b * config/*/*.mt (TDEPFILES): Remove refs to *-pinsn.o. 1995-01-17 04:53:00 +00:00
Stan Shebs
669caa9c19 Replace useless FRAME, FRAME_ADDR types with struct frame_info *
and CORE_ADDR, respectively.
	* frame.h (FRAME, FRAME_INFO_ID, FRAME_ADDR): Remove.
	* blockframe.c (get_frame_info): Remove.
	* a29k-tdep.c, alpha-tdep.c, blockframe.c, breakpoint.c,
	breakpoint.h, energize.c, findvar.c, gdbtk.c, gould-pinsn.c,
	h8300-tdep.c, h8500-tdep.c, hppa-tdep.c, i386-tdep.c, i960-tdep.c,
	infcmd.c, inferior.h, infrun.c, m68k-tdep.c, m88k-tdep.c,
	mips-tdep.c, nindy-tdep.c, printcmd.c, pyr-tdep.c, rs6000-tdep.c,
	sh-tdep.c, sparc-tdep.c, stack.c, valops.c, z8k-tdep.c,
	config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
	config/gould/tm-pn.h, config/h8300/tm-h8300.h,
	config/h8500/tm-h8500.h, config/mips/tm-mips.h,
	config/ns32k/tm-merlin.h, config/ns32k/tm-umax.h,
	config/pyr/tm-pyr.h, config/sparc/tm-sparc.h): Replace FRAME with
	struct frame_info * everywhere, replace FRAME_ADDR with CORE_ADDR,
	rename variables consistently (using `frame' or `fi'), remove
	calls to get_frame_info and FRAME_INFO_ID, remove comments about
	FRAME and FRAME_ADDR cruftiness.
1994-11-04 01:19:29 +00:00
Stan Shebs
b5bfe299de * Makefile.in (ANNOTATE_OBS): New definition.
(COMMON_OBS): Add exec.o.
	(annotate.o): Remove extra compile rule.
	* config/*/*.mh, config/*/*.mt: Remove exec.o from *DEPFILES lists
	everywhere.
1994-10-13 02:28:24 +00:00
Jim Kingdon
16726dd15b The point of these changes is to avoid reading the frame pointer
and stack pointer during stepping, to speed things up.
	A.  Changes to not select a frame until we need a selected frame:
	    * blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
	    * infrun.c (wait_for_inferior): Move call to select_frame back to
	    normal_stop.  This reverts a change of 13 Apr 94 (it says Jeff
	    Law, but the change was my idea); the only reason for that change
	    was so we could save and restore the selected frame in
	    wait_for_inferior, and now that flush_cached frames clears the
	    selected frame, that should work OK now.
	B.  Changes to not create a current_frame until we need one:
	    * blockframe.c (get_current_frame): If current_frame is NULL, try
	    to create an innermost frame.
	    * sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
	    infrun.c (wait_for_inferior), thread.c (thread_switch),
	    convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
	    alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
	    h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
	    hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
	    i960-tdep.c (pop_frame), m68k-tdep.c
	    (m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
	    (push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
	    (pop_frame), config/arm/tm-arm.h (POP_FRAME),
	    config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
	    (POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
	    config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
	    (POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
	    call create_new_frame.
	    * corelow.c (core_open), altos-xdep.c (core_file_command),
	    arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
	    m3-nat.c (select_thread), sun386-nat.c (core_file_command),
	    umax-xdep.c (core_file_command): Don't call create_new_frame; do
	    call flush_cached_frames.
	    * blockframe.c (reinit_frame_cache): Don't call create_new_frame
	    or select_frame.
	C.  Changes to get rid of stop_frame_address and instead only
	fetch the frame pointer when we need it.
	    * breakpoint.c (bpstat_stop_status): Remove argument
	    frame_address; use FRAME_FP (get_current_frame ()).
	    * infrun.c (wait_for_inferior): Don't pass frame pointer to
	    bpstat_stop_status.
	    * infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
	    ()) instead of stop_frame_address.
	    * infrun.c (save_inferior_status, restore_inferior_status),
	    inferior.h (struct inferior_status): Don't save and restore
	    stop_frame_address.
	    * inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
	    (select_thread): Remove stop_frame_address and uses thereof.
	D.  Same thing for the stack pointer.
	    * infrun.c (wait_for_inferior): Remove stop_sp and replace
	    uses thereof with read_sp ().
	E.  Change to eliminate one nasty little spot where we were
	wanting to know the frame pointer from before the current step
	(idea from GDB 3.5, which saved my ass, because my other ideas of
	how to fix it were very baroque).
	    * infrun.c: Remove prev_frame_address.
	    * infrun.c (wait_for_inferior, step_over_function): Use
	    step_frame_address instead of prev_frame_address.
	F.  Same basic idea for the stack pointer.
	    * inferior.h, infcmd.c: New variable step_sp.
	    * infcmd.c (step_1, until_next_command): Set it.
	    * infrun.c: Remove prev_sp and replace uses by step_sp.
	    * infrun.c (wait_for_inferior): If we get out of the step
	    range, then set step_sp to the current stack pointer before we
	    start going again.
1994-10-08 03:41:21 +00:00
Stan Shebs
ac57e5adda * infcmd.c (do_registers_info) [INVALID_FLOAT]: Only use if
defined.
	* values.c (unpack_double) [INVALID_FLOAT]: Ditto.
	* mips-tdep.c (mips_print_register): Don't test float validity.
	* config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
	config/arm/tm-arm.h, config/convex/tm-convex.h,
	config/h8300/tm-h8300.h, config/h8500/tm-h8500.h,
	config/i386/tm-i386v.h, config/i386/tm-sun386.h,
	config/i960/tm-i960.h, config/m68k/tm-m68k.h,
	config/m88k/tm-m88k.h, config/mips/tm-mips.h,
	config/ns32k/tm-merlin.h, config/ns32k/tm-nbsd.h,
	config/ns32k/tm-ns32km3.h, config/ns32k/tm-umax.h,
	config/pa/tm-hppa.h, config/pyr/tm-pyr.h,
	config/rs6000/tm-rs6000.h, config/sh/tm-sh.h,
	config/sparc/tm-sparc.h, config/z8k/tm-z8k.h (INVALID_FLOAT):
	Remove definition.
1994-09-25 21:13:24 +00:00
J.T. Conklin
84f652b150 * solib.c: *BSD systems need <a.out.h> to be included before
<link.h>.

* i386b-nat.c: Add i386_float_info(), etc.
* config/i386/nm-nbsd.h: #define FLOAT_INFO.

* config/nm-nbsd.h: New file, for generic NetBSD native support.
* config/i386/nm-nbsd.h: Use it.
* config/sparc/nm-nbsd.h: Use it.
* config/ns32k/nm-nbsd.h: Use it.

* configure.in (i386-*-netbsd): Use config/i386/nbsd.m[ht].
  (ns32k-*-netbsd): Use config/ns32k/nbsd.m[ht].
* config/i386/{nbsd.mh,nbsd.mt,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}:
  New files, support for NetBSD/i386.
* config/ns32k/{nbsd.mh,nbsd.mh,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}:
  New files, support for NetBSD/ns32k.
1994-09-23 22:30:31 +00:00
Jim Kingdon
d8fc877318 * source.c (find_source_lines): Always use code that was #ifdef
BROKEN_LARGE_ALLOCA.  Do the cleanup before returning, rather than
	leaving it on the chain.  Reindent much of this function.
	* config/sparc/{xm-sun4sol2.h,xm-sun4os4.h},
	config/i386/{xm-sun386.h,xm-i386m3.h,xm-i386mach.h},
	config/m68k/{sun3os4.h,xm-news.h,xm-hp300hpux.h},
	config/ns32k/xm-ns32km3.h: Remove all references to
	BROKEN_LARGE_ALLOCA; with the above change it is no longer needed.
	* main.c, fork-child.c, many config files: Remove all
	SET_STACK_LIMIT_HUGE code; with the above changes it should no
	longer be needed.

	* symtab.c (lookup_partial_symbol): Use if and abort, not assert.
	This avoids __eprintf troubles.

	* main.c (main): Surround in #ifndef MAIN_OVERRIDE.  Move
	initialization code which needs to be called even if we bypass the
	command line stuff into gdb_init.
	* utils.c (fputs_unfiltered): Surround in #ifndef
	FPUTS_UNFILTERED_OVERRIDE.
	* Makefile.in (libgdb.a): New target.

	* utils.c: Rearrange I/O stuff a bit so that all output goes
	through fputs_unfiltered.  Use vasprintf; removes arbitrary limit
	which made %s not work with arbitrarily large strings.
	* printcmd.c (printf_command): Use printf_filtered, not
	printf_unfiltered and printf, now that arbitrary limit is gone.
1994-05-14 19:37:57 +00:00
Jim Kingdon
01cd70b985 * config/mips/mipsm3.mh, config/i386/i386m3.mh,
config/ns32k/ns32km3.mh: Define NAT_FILE.
	* config/nm-m3.h: Change guard from _OS_MACH3_H_ and _OS_MACH3_H
	(it was inconsistent and namespace-wrong) to NM_M3_H.
	* m3-nat.c (mach_really_wait): Change parameter name to ourstatus.
	(m3_open): New function.
	(m3_ops): Use it.
	* TODO: Update Mach section.

	* Makefile.in: Remove "rapp" stuff; it is superseded by gdbserver.
1994-02-06 22:38:28 +00:00
Jim Kingdon
f4f0d17487 * valops.c (call_function_by_hand, push_word), defs.h (push_word),
convex-xdep.c, m88k-nat.c, i386m3-nat.c, mips-tdep.c, mipsm3-nat.c,
	ns32km3-nat.c, remote-bug.c, m88k-tdep.c, remote-hms.c, remote-mips.c,
	config/gould/tm-np1.h, hppa-tdep.c (hppa_fix_call_dummy), remote-vx.c:
	Use REGISTER_SIZE, unsigned LONGEST, and
	{store,extract}_unsigned_integer, instead of sizeof
	(REGISTER_TYPE) and REGISTER_TYPE.
	* All tm.h files: Change REGISTER_TYPE to REGISTER_SIZE.
	* hppa-tdep.c (pa_print_fp_reg): Remove unused variable val.

	* Makefile.in (ALLDEPFILES): Remove i386ly-nat.c and m68kly-nat.c.
	Add lynx-nat.c.
1993-12-26 18:10:22 +00:00
Peter Schauer
ad09cb2bd3 * findvar.c (value_of_register, value_from_register),
hppa-tdep.c (pa_print_fp_reg), infcmd.c (do_registers_info),
	valops.c (value_assign):   Use REGISTER_CONVERT_TO_* only if
	REGISTER_CONVERTIBLE is defined, otherwise just copy the content.
	Pass desired type to REGISTER_CONVERT_TO_*.

	* config/m68k/tm-m68k.h, config/i960/tm-i960.h (REGISTER_CONVERT_*):
	Pass length of desired type to store/extract_floating.
	* config/i386/tm-arm.h, config/i386/tm-i386aix.h,
	config/i386/tm-sun386.h, config/i386/tm-symmetry.h,
	config/m88k/tm-m88k.h config/rs6000/tm-rs6000.h (REGISTER_CONVERT_*):
	Use extract_floating and store_floating with length of desired type.
	* config/m68k/tm-news.h (STORE,EXTRACT_RETURN_VALUE):  Add type
	parameter to REGISTER_CONVERT_*.

	* config/a29k/tm-a29k.h, config/convex/tm-convex.h,
	config/gould/tm-np1.h, config/gould/tm-pn.h, config/h8300/tm-h8300.h,
	config/h8500/tm-h8500.h, config/i386/tm-i386v.h,
	config/mips/tm-mips.h, config/ns32k/tm-merlin.h,
	config/ns32k/tm-umax.h, config/pa/tm-hppa.h, config/pyr/tm-pyr.h,
	config/sh/tm-sh.h, config/sparc/tm-sparc.h, config/tahoe/tm-tahoe.h,
	config/vax/tm-vax.h, config/z8k/tm-z8k.h (REGISTER_CONVERTIBLE,
	REGISTER_CONVERT_TO_RAW, REGISTER_CONVERT_TO_VIRTUAL):  Remove
	versions for which REGISTER_CONVERTIBLE is always false.
	* z8k-tdep.c (register_convert_to_virtual, register_convert_to_raw):
	Remove, no longer used.

	* alpha-tdep.c (alpha_register_convert_to_raw,
	alpha_register_convert_to_virtual):  New routines to handle
	the different raw formats in alpha floating point registers.
	* config/alpha/tm-alpha.h (REGISTER_CONVERTIBLE,
	REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW):  Use them.
1993-11-02 21:51:10 +00:00
Jim Kingdon
df0393e345 * config/i386/{i386m3.mh,i386mk.mh}, config/mips/mipsm3.mh,
config/ns32k/ns32km3.mh: Change MMALLOC_LIB to MMALLOC.
	* TODO: Update Mach stuff.
1993-10-30 13:42:43 +00:00
Jim Kingdon
355b334f68 * config/i386/{i386m3.mt,i386m3.mh},
config/mips/{mipsm3.mt,mipsm3.mh},
	config/ns32k/{ns32km3.mt,ns32km3.mh}: Use correct names for TM_FILE
	and XM_FILE.  Replace host files *mach3-xdep.o with native
	files *m3-nat.o.  Replace host file os-mach3.o with native
	file m3-nat.o.
1993-10-28 15:04:40 +00:00
Jim Kingdon
bc28a06cc1 * fork-child.c (fork_inferior): Set inferior_pid before calling
init_trace_fun.  Move the code which gets us through the shell
	to new function startup_inferior.
	* inferior.h: Declare startup_inferior.
	* procfs.c (procfs_init_inferior), inftarg.c (ptrace_him):
	Call startup_inferior.
	* m3-nat.c (m3_trace_him): Call intercept_exec_calls.
	* config/nm-m3.h: Don't define STARTUP_INFERIOR.
	* config/i386/tm-i386m3.h, config/ns32k/tm-ns32k.h,
	config/mips/tm-mipsm3.h: Don't define START_INFERIOR_TRAPS_EXPECTED.
1993-10-27 19:30:27 +00:00
Jim Kingdon
5d76c8e662 * fork-child.c (fork_inferior), remote-eb.c (eb_create_inferior),
remote-mon.c (monitor_create_inferior), remote-nindy.c
	(nindy_create_inferior), remote-st.c (st2000_create_inferior),
	remote-vx.c (vx_create_inferior): Remove CREATE_INFERIOR_HOOK; it
	is replaced by init_trace_fun.
	* config/convex/xm-convex.h, convex-xdep.c: Add comments explaining
	how to do without CREATE_INFERIOR_HOOK for whoever fixes the Convex
	port.

	* Makefile.in: Add Mach files to ALLDEPFILES, etc.
	* m3-nat.c: Clean up more hair--message(), cprocs.
	* configure.in: Recognize Mach targets and hosts.
	* config/ns32k/tm-umax.h: Add some #ifndef's so tm-ns32km3.h can
	include this file.
	* Mach headers in config/*/tm-*.h: Fix includes to match correct
	locations of files.
1993-10-15 04:26:06 +00:00
Jim Kingdon
c2d751d5e5 New Mach stuff:
* config/i386/i386mach.c: Explain this is for the old (probably
	non-functional and/or obsolete) Mach stuff.
	* m3-nat.c, config/nm-m3.h,
	i386m3-nat.c, mipsm3-nat.c, ns32km3-nat.c,
	config/i386/{i386m3.mh,i386m3.mt,tm-i386m3.h,xm-i386m3.h},
	config/i386/{i386mk.mh,i386mk.mt,tm-i386mk.h,xm-i386mk.h},
	config/mips/{mipsm3.mh,mipsm3.mt,tm-mipsm3.h,xm-mipsm3.h},
	config/ns32k/{ns32km3.mh,ns32km3.mt,tm-ns32km3.h,xm-ns32km3.h}:
	New files.
1993-10-07 20:13:08 +00:00
Jim Kingdon
899e041349 new for mach 1993-10-07 18:03:51 +00:00
Jim Kingdon
cfeed64ee6 * Makefile.in (install, uninstall): Remove $$n.1 stuff; I don't
understand what it is trying to do, but I suspect it's not doing
	it.

	* config/ns32k/merlin.mh: Add comment about M_INSTALL.
	* config/m88k/{delta88.mh,delta88v4.mh}: Remove M_INSTALL and
	M_UNINSTALL; it tries to install a non-existent file gdb.z.
	* Makefile.in: Remove M_INSTALL stuff; the above were the only uses.
1993-10-05 21:25:10 +00:00
K. Richard Pixley
4ed97c9a83 bzero -> memset 1993-09-01 21:56:42 +00:00
K. Richard Pixley
ade40d3153 bcopy -> memcpy 1993-09-01 20:37:15 +00:00
Fred Fish
b5ed6e32c2 Remove '.Sanitize' from explicit list of Things-to-lose. It is now implicitly
added to the list by Sanitize, unless Sanitize knows it needs to keep it.
1993-08-02 23:29:32 +00:00
Fred Fish
775d4a4096 Add .Sanitize to Things-to-lose list. 1993-07-30 16:46:19 +00:00
K. Richard Pixley
c2df19bdb1 new M_UNINSTALL macro 1993-06-23 22:06:58 +00:00
Jim Kingdon
6ffbfcc2a5 * config/ns32k/{merlin.mh,xm-merlin.h}: Be consistent about name
of gdb-sh.
1993-06-23 19:44:05 +00:00
K. Richard Pixley
87756e15db added things-to-lose sections 1993-05-27 06:44:29 +00:00
Fred Fish
b0cb2d9154 Add .Sanitize files for new directories. 1993-03-23 03:58:44 +00:00
Fred Fish
5076de826c * config/{*.mt, *.mh}: All target and host makefile fragment
config files moved to an appropriate config/<cpu> subdirectory.
	* nm-*, xm-*, tm-*:  All native, host, and target files, which
	get linked to nm.h, xm.h, and tm.h respectively by configure,
	moved to appropriate config/<cpu> subdirectory.
1993-03-23 01:19:58 +00:00