The -mfuture and -Mfuture options which are used for adding potential
new ISA instructions were not documented. They also lacked a bitmask
so new instructions could not be enabled by those options. Fixed.
binutils/
* doc/binutils.texi: Document -Mfuture.
gas/
* config/tc-ppc.c: Document -mfuture
* doc/c-ppc.texi: Likewise.
include/
* opcode/ppc.h (PPC_OPCODE_FUTURE): Define.
opcodes/
* ppc-dis.c (ppc_opts) <future>: Use it.
* ppc-opc.c (FUTURE): Define.
Three-part patch set from Tsukasa OI to support zmmul in assembler.
The 'Zmmul' is a RISC-V extension consisting of only multiply instructions
(a subset of 'M' which has multiply and divide instructions).
bfd/
* elfxx-riscv.c (riscv_implicit_subsets): Add 'Zmmul' implied by 'M'.
(riscv_supported_std_z_ext): Add 'Zmmul' extension.
(riscv_multi_subset_supports): Add handling for new instruction class.
gas/
* testsuite/gas/riscv/attribute-09.d: Updated implicit 'Zmmul' by 'M'.
* testsuite/gas/riscv/option-arch-02.d: Likewise.
* testsuite/gas/riscv/m-ext.s: New test.
* testsuite/gas/riscv/m-ext-32.d: New test (RV32).
* testsuite/gas/riscv/m-ext-64.d: New test (RV64).
* testsuite/gas/riscv/zmmul-32.d: New expected output.
* testsuite/gas/riscv/zmmul-64.d: Likewise.
* testsuite/gas/riscv/m-ext-fail-xlen-32.d: New test (failure
by using RV64-only instructions in RV32).
* testsuite/gas/riscv/m-ext-fail-xlen-32.l: Likewise.
* testsuite/gas/riscv/m-ext-fail-zmmul-32.d: New failure test
(RV32 + Zmmul but with no M).
* testsuite/gas/riscv/m-ext-fail-zmmul-32.l: Likewise.
* testsuite/gas/riscv/m-ext-fail-zmmul-64.d: New failure test
(RV64 + Zmmul but with no M).
* testsuite/gas/riscv/m-ext-fail-zmmul-64.l: Likewise.
* testsuite/gas/riscv/m-ext-fail-noarch-64.d: New failure test
(no Zmmul or M).
* testsuite/gas/riscv/m-ext-fail-noarch-64.l: Likewise.
include/
* opcode/riscv.h (enum riscv_insn_class): Added INSN_CLASS_ZMMUL.
ld/
* testsuite/ld-riscv-elf/attr-merge-arch-01.d: We don't care zmmul in
these testcases, so just replaced m by a.
* testsuite/ld-riscv-elf/attr-merge-arch-01a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-01b.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-02a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-user-ext-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-user-ext-rv32i2p1_a2p0.s: Renamed.
* testsuite/ld-riscv-elf/attr-merge-user-ext-rv32i2p1_a2p1.s: Renamed.
opcodes/
* riscv-opc.c (riscv_opcodes): Updated multiply instructions to zmmul.
svstep and svshape instructions subtract 1 before encoding some of the
operands. Obviously zero is not supported for these operands. Whilst
PPC_OPERAND_PLUS1 fits perfectly to mark that maximal value should be
incremented, there is no flag which marks the fact that zero values are
not allowed. This patch adds a new flag, PPC_OPERAND_NONZERO, for this
purpose.
This patch adds support for LibreSOC machine and SVP64 extension flag
for PowerPC architecture. SV (Simple-V) is a strict RISC-paradigm
Scalable Vector Extension for the Power ISA. SVP64 is the 64-bit
Prefixed instruction format implementing SV. Funded by NLnet through EU
Grants No: 825310 and 825322, SV is in DRAFT form and is to be publicly
submitted via the OpenPOWER Foundation ISA Working Group via the
newly-created External RFC Process.
For more details, visit https://libre-soc.org.
This commit enables disassembler styling for AArch64. After this
commit it is possible to have objdump style AArch64 disassembler
output (using --disassembler-color option). Once the required GDB
patches are merged, GDB will also style the disassembler output.
The changes to support styling are mostly split between two files
opcodes/aarch64-dis.c and opcodes/aarch64-opc.c.
The entry point for the AArch64 disassembler can be found in
aarch64-dis.c, this file handles printing the instruction mnemonics,
and assembler directives (e.g. '.byte', '.word', etc). Some operands,
mostly relating to assembler directives are also printed from this
file. This commit changes all of this to pass through suitable
styling information.
However, for most "normal" instructions, the instruction operands are
printed using a two step process. From aarch64-dis.c, in the
print_operands function, the function aarch64_print_operand is called,
this function is in aarch64-opc.c, and converts an instruction operand
into a string. Then, back in print_operands (aarch64-dis.c), the
operand string is printed.
Unfortunately, the string returned by aarch64_print_operand can be
quite complex, it will include syntax elements, like '[' and ']', in
addition to register names and immediate values. In some cases, a
single operand will expand into what will appear (to the user) as
multiple operands separated with a ','.
This makes the task of styling more complex, all these different
components need to by styled differently, so we need to get the
styling information out of aarch64_print_operand in some way.
The solution that I propose here is similar to the solution that I
used for the i386 disassembler.
Currently, aarch64_print_operand uses snprintf to write the operand
text into a buffer provided by the caller.
What I propose is that we pass an extra argument to the
aarch64_print_operand function, this argument will be a structure, the
structure contains a callback function and some state.
When aarch64_print_operand needs to format part of its output this can
be done by using the callback function within the new structure, this
callback returns a string with special embedded markers that indicate
which mode should be used for each piece of text. Back in
aarch64-dis.c we can spot these special style markers and use this to
split the disassembler output up and apply the correct style to each
piece.
To make aarch64-opc.c clearer a series of new static functions have
been added, e.g. 'style_reg', 'style_imm', etc. Each of these
functions formats a piece of text in a different style, 'register' and
'immediate' in this case.
Here's an example taken from aarch64-opc.c of the new functions in
use:
snprintf (buf, size, "[%s, %s]!",
style_reg (styler, base),
style_imm (styler, "#%d", opnd->addr.offset.imm));
The aarch64_print_operand function is also called from the assembler
to aid in printing diagnostic messages. Right now I have no plans to
add styling to the assembler output, and so, the callback function
used in the assembler ignores the styling information and just returns
an plain string.
I've used the source files in gas/testsuite/gas/aarch64/ for testing,
and have manually gone through and checked that the styling looks
reasonable, however, I'm not an AArch64 expert, so it is possible that
the odd piece is styled incorrectly. Please point out any mistakes
I've made.
With objdump disassembler color turned off, there should be no change
in the output after this commit.
This commit adds Zfhmin and Zhinxmin extensions (subsets of Zfh and
Zhinx extensions, respectively). In the process supporting Zfhmin and
Zhinxmin extension, this commit also changes how instructions are
categorized considering Zfhmin, Zhinx and Zhinxmin extensions.
Detailed changes,
* From INSN_CLASS_ZFH to INSN_CLASS_ZFHMIN:
flh, fsh, fmv.x.h and fmv.h.x.
* From INSN_CLASS_ZFH to INSN_CLASS_ZFH_OR_ZHINX:
fmv.h.
* From INSN_CLASS_ZFH_OR_ZHINX to INSN_CLASS_ZFH_OR_ZHINX:
fneg.h, fabs.h, fsgnj.h, fsgnjn.h, fsgnjx.h,
fadd.h, fsub.h, fmul.h, fdiv.h, fsqrt.h, fmin.h, fmax.h,
fmadd.h, fnmadd.h, fmsub.h, fnmsub.h,
fcvt.w.h, fcvt.wu.h, fcvt.h.w, fcvt.h.wu,
fcvt.l.h, fcvt.lu.h, fcvt.h.l, fcvt.h.lu,
feq.h, flt.h, fle.h, fgt.h, fge.h,
fclass.h.
* From INSN_CLASS_ZFH_OR_ZHINX to INSN_CLASS_ZFHMIN_OR_ZHINXMIN:
fcvt.s.h and fcvt.h.s.
* From INSN_CLASS_D_AND_ZFH_INX to INSN_CLASS_ZFHMIN_AND_D:
fcvt.d.h and fcvt.h.d.
* From INSN_CLASS_Q_AND_ZFH_INX to INSN_CLASS_ZFHMIN_AND_Q:
fcvt.q.h and fcvt.h.q.
bfd/ChangeLog:
* elfxx-riscv.c (riscv_implicit_subsets): Change implicit
subsets. Zfh->Zicsr is not needed and Zfh->F is replaced with
Zfh->Zfhmin and Zfhmin->F. Zhinx->Zicsr is not needed and
Zhinx->Zfinx is replaced with Zhinx->Zhinxmin and
Zhinxmin->Zfinx.
(riscv_supported_std_z_ext): Added zfhmin and zhinxmin.
(riscv_multi_subset_supports): Rewrite handling for new
instruction classes.
(riscv_multi_subset_supports_ext): Updated.
(riscv_parse_check_conflicts): Change error message to include
zfh and zfhmin extensions.
gas/ChangeLog:
* testsuite/gas/riscv/zfhmin-d-insn-class-fail.s: New complex
error handling test.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-1.d: Likewise.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-1.l: Likewise.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-2.d: Likewise.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-2.l: Likewise.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-3.d: Likewise.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-3.l: Likewise.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-4.d: Likewise.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-4.l: Likewise.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-5.d: Likewise.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-5.l: Likewise.
* testsuite/gas/riscv/zhinx.d: Renamed from fp-zhinx-insns.d
and refactored.
* testsuite/gas/riscv/zhinx.s: Likewise.
include/ChangeLog:
* opcode/riscv.h (enum riscv_insn_class): Removed INSN_CLASS_ZFH,
INSN_CLASS_D_AND_ZFH_INX and INSN_CLASS_Q_AND_ZFH_INX. Added
INSN_CLASS_ZFHMIN, INSN_CLASS_ZFHMIN_OR_ZHINXMIN,
INSN_CLASS_ZFHMIN_AND_D and INSN_CLASS_ZFHMIN_AND_Q.
opcodes/ChangeLog:
* riscv-opc.c (riscv_opcodes): Change instruction classes for
Zfh and Zfhmin instructions. Fix `fcvt.h.lu' instruction
(two operand variant) mask.
The function aarch64_print_operand (aarch64-opc.c) is responsible for
converting an instruction operand into the textual representation of
that operand.
In some cases, a comment is included in the operand representation,
though this (currently) only happens for the last operand of the
instruction.
In a future commit I would like to enable the new libopcodes styling
for AArch64, this will allow objdump and GDB[1] to syntax highlight
the disassembler output, however, having operands and comments
combined in a single string like this makes such styling harder.
In this commit, I propose to extend aarch64_print_operand to take a
second buffer. Any comments for the instruction are written into this
extra buffer. The two callers of aarch64_print_operand are then
updated to pass an extra buffer, and print any resulting comment.
In this commit no styling is added, that will come later. However, I
have adjusted the output slightly. Before this commit some comments
would be separated from the instruction operands with a tab character,
while in other cases the comment was separated with two single spaces.
After this commit I use a single tab character in all cases. This
means a few test cases needed updated. If people would prefer me to
move everyone to use the two spaces, then just let me know. Or maybe
there was a good reason why we used a mix of styles, I could probably
figure out a way to maintain the old output exactly if that is
critical.
Other than that, there should be no user visible changes after this
commit.
[1] GDB patches have not been merged yet, but have been posted to the
GDB mailing list:
https://sourceware.org/pipermail/gdb-patches/2022-June/190142.html
According to the picture 28.1 in the current ISA spec, h is no larger the
multi-letter extension, it is a single extension after v. Therefore, this
patch fix the implementation, and use the single h to control hypervisor
CSRs and instructions, which we promised to do before.
bfd/
* elfxx-riscv.c (riscv_supported_std_ext): Added h with version 1.0 after v.
(riscv_supported_std_h_ext): Removed.
(riscv_all_supported_ext): Updated since riscv_supported_std_h_ext is removed.
(riscv_prefix_ext_class): Removed RV_ISA_CLASS_H.
(parse_config): Updated since riscv_prefix_ext_class is removed.
(riscv_recognized_prefixed_ext): Likewise.
(riscv_get_default_ext_version): Likewise.
(riscv_multi_subset_supports): Handle INSN_CLASS_H for hypervisor instructions.
(riscv_multi_subset_supports_ext): Likewise.
gas/
* config/tc-riscv.c (riscv_csr_class): Added CSR_CLASS_H and CSR_CLASS_H_32 for
hypervisor CSRs.
(riscv_csr_address): Likewise.
* testsuite/gas/riscv/csr-version-1p10.d: Updated since hypervisor CSRs are
controlled by single h extension for now.
* testsuite/gas/riscv/csr-version-1p10.l: Likewise.
* testsuite/gas/riscv/csr-version-1p11.d: Likewise.
* testsuite/gas/riscv/csr-version-1p11.l: Likewise.
* testsuite/gas/riscv/csr-version-1p12.d: Likewise.
* testsuite/gas/riscv/csr-version-1p12.l: Likewise.
* testsuite/gas/riscv/csr-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/csr-version-1p9p1.l: Likewise.
* testsuite/gas/riscv/h-ext-32.d: Added h to architecture string.
* testsuite/gas/riscv/h-ext-64.d: Likewise.
* testsuite/gas/riscv/march-fail-single-prefix-h: Removed since h is no
longer multi-letter extension.
* testsuite/gas/riscv/march-fail-unknown-h.d: Likewise.
include/
* opcode/riscv-opc.h: Control hypervisor CSRs by h extension, rather than
the privileged spec verisons.
* opcode/riscv.h (riscv_insn_class): Added INSN_CLASS_H.
opcodes/
* riscv-opc.c (riscv_opcodes): Control hypervisor instructions by h extension.
The zhinx extension is a sub-extension in zfinx, corresponding to
zfh extension but use GPRs instead of FPRs.
This patch expanded the zfh insn class define, since zfh and zhinx
use the same opcodes, thanks for Nelson's works.
changelog in V2: Add missing classes of 'zfh' and 'zhinx' in
"riscv_multi_subset_supports_ext".
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): New extensions.
(riscv_multi_subset_supports_ext): New extensions.
gas/ChangeLog:
* testsuite/gas/riscv/fp-zhinx-insns.d: New test.
* testsuite/gas/riscv/fp-zhinx-insns.s: New test.
include/ChangeLog:
* opcode/riscv.h (enum riscv_insn_class): New INSN classes.
opcodes/ChangeLog:
* riscv-opc.c: Modify INSN_CLASS.
Requiring C99 means that uses of bfd_uint64_t can be replaced with
uint64_t, and similarly for bfd_int64_t, BFD_HOST_U_64_BIT, and
BFD_HOST_64_BIT. This patch does that, removes #ifdef BFD_HOST_*
and tidies a few places that print 64-bit values.
With the upcoming SVP64 extension[0] to PowerPC architecture, it became
evident that PowerPC operand indices no longer fit 8 bits. This patch
switches the underlying type to uint16_t, also introducing a special
typedef so that any future extension goes even smoother.
[0] https://libre-soc.org
include/
* opcode/ppc.h (ppc_opindex_t): New typedef.
(struct powerpc_opcode): Use it.
(PPC_OPINDEX_MAX): Define.
gas/
* write.h (struct fix): Increase size of fx_pcrel_adjust.
Reorganise.
* config/tc-ppc.c (insn_validate): Use ppc_opindex_t for operands.
(md_assemble): Likewise.
(md_apply_fix): Likewise. Mask fx_pcrel_adjust with PPC_OPINDEX_MAX.
(ppc_setup_opcodes): Adjust opcode index assertion.
opcodes/
* ppc-dis.c (skip_optional_operands): Use ppc_opindex_t for
operand pointer.
(lookup_powerpc, lookup_prefix, lookup_vle, lookup_spe2): Likewise.
(print_insn_powerpc): Likewise.
As fmv.x.q and fmv.q.x instructions are RV128-only (not RV64-only),
it should be removed until RV128 support for GNU Binutils is required
again.
gas/ChangeLog:
* testsuite/gas/riscv/fmv.x.q-rv64-fail.d: New failure test.
* testsuite/gas/riscv/fmv.x.q-rv64-fail.l: Likewise.
* testsuite/gas/riscv/fmv.x.q-rv64-fail.s: Likewise.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH_FMV_X_Q, MASK_FMV_X_Q,
MATCH_FMV_Q_X, MASK_FMV_Q_X): Remove RV128-only instructions.
opcodes/ChangeLog:
* riscv-opc.c (riscv_opcodes): Remove RV128-only instructions.
In Armv9-A SVE is mandatory, and for SVE FP16 is mandatory. This fixes a disconnect
between GCC and binutils where GCC has FP16 on by default and gas doesn't.
include/ChangeLog:
2022-05-16 Tamar Christina <tamar.christina@arm.com>
* opcode/aarch64.h (AARCH64_ARCH_V9_FEATURES): Add AARCH64_FEATURE_F16.
The recently added support for the Zicbo{m,p,z} extensions did not
include DECLARE_INSN() declarations for the instructions.
These declarations are needed by GDB's instruction detection code.
This patch adds them.
Signed-off-by: Christoph Muellner <cmuellner@gcc.gnu.org>
Let's hope this stays dead, but it's here as a patch separate from
those that removed use of powerpc_macros just in case it needs to be
resurrected.
include/
* opcode/ppc.h (struct powerpc_macro): Delete declaration.
(powerpc_macros, powerpc_num_macros): Likewise..
opcodes/
* ppc-opc.c (powerpc_macros, powerpc_num_macros): Delete.
gas/
* config/tc-ppc.c (ppc_macro): Delete function.
(ppc_macro_hash): Delete.
(ppc_setup_opcodes, md_assemble): Delete macro support.
The extended instructions implemented in powerpc_macros aren't used by
the disassembler. That means instructions like "sldi r3,r3,2" appear
in disassembly as "rldicr r3,r3,2,61", which is annoying since many
other extended instructions are shown.
Note that some of the instructions moved out of the macro table to the
opcode table won't appear in disassembly, because they are aliases
rather than a subset of the underlying raw instruction. If enabled,
rotrdi, extrdi, extldi, clrlsldi, and insrdi would replace all
occurrences of rotldi, rldicl, rldicr, rldic and rldimi. (Or many
occurrences in the case of clrlsldi if n <= b was added to the extract
functions.)
The patch also fixes a small bug in opcode sanity checking.
include/
* opcode/ppc.h (PPC_OPSHIFT_SH6): Define.
opcodes/
* ppc-opc.c (insert_erdn, extract_erdn, insert_eldn, extract_eldn),
(insert_crdn, extract_crdn, insert_rrdn, extract_rrdn),
(insert_sldn, extract_sldn, insert_srdn, extract_srdn),
(insert_erdb, extract_erdb, insert_csldn, extract_csldb),
(insert_irdb, extract_irdn): New functions.
(ELDn, ERDn, ERDn, RRDn, SRDn, ERDb, CSLDn, CSLDb, IRDn, IRDb):
Define and add associated powerpc_operands entries.
(powerpc_opcodes): Add "rotrdi", "srdi", "extrdi", "clrrdi",
"sldi", "extldi", "clrlsldi", "insrdi" and corresponding record
(ie. dot suffix) forms.
(powerpc_macros): Delete same from here.
gas/
* config/tc-ppc.c (insn_validate): Don't modify value passed
to operand->insert for PPC_OPERAND_PLUS1 when calculating mask.
Handle PPC_OPSHIFT_SH6.
* testsuite/gas/ppc/prefix-reloc.d: Update.
* testsuite/gas/ppc/simpshft.d: Update.
ld/
* testsuite/ld-powerpc/elfv2so.d: Update.
* testsuite/ld-powerpc/notoc.d: Update.
* testsuite/ld-powerpc/notoc3.d: Update.
* testsuite/ld-powerpc/tlsdesc2.d: Update.
* testsuite/ld-powerpc/tlsget.d: Update.
* testsuite/ld-powerpc/tlsget2.d: Update.
* testsuite/ld-powerpc/tlsopt5.d: Update.
* testsuite/ld-powerpc/tlsopt6.d: Update.
* Removed N extension CSRs,
ustatus, uie, utvec, uscratch, uepc, ucause, utval and uip.
* Removed two supervisor CSRs,
sedeleg and sideleg.
* Changed debug CSR address of scontext from 0x7aa to 0x5a8. We cannot support
different versions of debug specs for now, so only supporting the latest one is
the only way to move forward.
* Added debug CSRs,
mscontext (0x7aa), mcontrol6 (0x7a1, tdata1) and tmexttrigger ((0x7a1, tdata1).
* Regarded hcontext as a debug CSR.
include/
* opcode/riscv-opc.h: Updated CSRs to privileged spec v1.12 and
debug spec v1.0.
gas/
* testsuite/gas/riscv/csr.s: Updated CSRs to privileged spec v1.12
and debug spec v1.0.
* testsuite/gas/riscv/csr-dw-regnums.d: Likewise.
* testsuite/gas/riscv/csr-version-1p10.d: Likewise.
* testsuite/gas/riscv/csr-version-1p10.l: Likewise.
* testsuite/gas/riscv/csr-version-1p11.d: Likewise.
* testsuite/gas/riscv/csr-version-1p11.l: Likewise.
* testsuite/gas/riscv/csr-version-1p12.d: Likewise.
* testsuite/gas/riscv/csr-version-1p12.l: Likewise.
* testsuite/gas/riscv/csr-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/csr-version-1p9p1.l: Likewise.
* testsuite/gas/riscv/csr-dw-regnums.d: Likewise.
* testsuite/gas/riscv/csr-dw-regnums.s: Likewise.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
This makes way for a clean 1.12 based Hypervisor Ext support.
There are no known implementors of 1.9.1 H-ext. (Per Jim, kendryte k210
is based on priv spec 1.9.1, but it seems unlikely that they implemented
H-ext).
Signed-off-by: Vineet Gupta <vineetg@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Nelson Chu <nelson.chu@sifive.com>
gas/
* testsuite/gas/riscv/csr-dw-regnums.d: Drop the hypervisor csrs
defined in the privileged spec 1.9.1.
* testsuite/gas/riscv/csr-dw-regnums.s: Likewise.
* testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg.s: Likewise.
include/
* opcode/riscv-opc.h: Drop the hypervisor csrs defined in the
privileged spec 1.9.1.
This patch adds AArch32 support for -march=armv9.[123]-a.
The behaviour of the new options can be expressed using a
combination of existing feature flags and tables.
The cpu_arch_ver entries for ARM_ARCH_V9_2A and ARM_ARCH_V9_3A
are technically redundant but it seemed less surprising to include
them anyway.
include/
* opcode/arm.h (ARM_ARCH_V9_1A, ARM_ARCH_V9_2A): New macros.
(ARM_ARCH_V9_3A): Likewise.
gas/
* doc/c-arm.texi: Add armv9.1-a, armv9.2-a and armv9.3-a.
* config/tc-arm.c (armv91a_ext_table, armv92a_ext_table): New macros.
(armv93a_ext_table): Likewise.
(arm_archs): Add armv9.1-a, armv9.2-a and armv9.3-a.
(cpu_arch_ver): Add ARM_ARCH_V9_1A, ARM_ARCH_V9_2A and ARM_ARCH_V9_3A.
* NEWS: Mention the above.
* testsuite/gas/arm/attr-march-armv9_1-a.d: New test.
* testsuite/gas/arm/attr-march-armv9_2-a.d: Likewise.
* testsuite/gas/arm/attr-march-armv9_3-a.d: Likewise.
* testsuite/gas/arm/bfloat16-armv9.1-a.d: Likewise.
* testsuite/gas/arm/bfloat16-armv9.2-a.d: Likewise.
* testsuite/gas/arm/bfloat16-armv9.3-a.d: Likewise.
* testsuite/gas/arm/i8mm-armv9.1-a.d: Likewise.
* testsuite/gas/arm/i8mm-armv9.2-a.d: Likewise.
* testsuite/gas/arm/i8mm-armv9.3-a.d: Likewise.
This patch adds AArch32 support for -march=armv8.[78]-a.
The behaviour of the new options can be expressed using a
combination of existing feature flags and tables.
The cpu_arch_ver entries are technically redundant but
it seemed less surprising to include them anyway.
include/
* opcode/arm.h (ARM_ARCH_V8_7A, ARM_ARCH_V8_8A): New macros.
gas/
* doc/c-arm.texi: Add armv8.7-a and armv8.8-a.
* config/tc-arm.c (armv87a_ext_table, armv88a_ext_table): New macros.
(arm_archs): Add armv8.7-a and armv8.8-a.
(cpu_arch_ver): Add ARM_ARCH_V8_7A and ARM_ARCH_V8_8A.
* NEWS: Mention the above.
* testsuite/gas/arm/attr-march-armv8_7-a.d: New test.
* testsuite/gas/arm/attr-march-armv8_8-a.d: Likewise.
* testsuite/gas/arm/bfloat16-armv8.7-a.d: Likewise.
* testsuite/gas/arm/bfloat16-armv8.8-a.d: Likewise.
* testsuite/gas/arm/i8mm-armv8.7-a.d: Likewise.
* testsuite/gas/arm/i8mm-armv8.8-a.d: Likewise.
This patch adds AArch64 support for -march=armv9.[123]-a.
The behaviour of the new options can be expressed using a
combination of existing feature flags, so we don't need to
eat into the vanishing number of spare AARCH64_FEATURE_* bits.
Hoewver, it was more convenient to separate out the |s of
feature flags so that Armv9.1-A could reuse the set for
Armv8.6-A, and so on.
include/
* opcode/aarch64.h (AARCH64_ARCH_V8_FEATURES): New macro,
split out from...
(AARCH64_ARCH_V8): ...here.
(AARCH64_ARCH_V8_1_FEATURES): New macro, split out from...
(AARCH64_ARCH_V8_1): ...here.
(AARCH64_ARCH_V8_2_FEATURES): New macro, split out from...
(AARCH64_ARCH_V8_2): ...here.
(AARCH64_ARCH_V8_3_FEATURES): New macro, split out from...
(AARCH64_ARCH_V8_3): ...here.
(AARCH64_ARCH_V8_4_FEATURES): New macro, split out from...
(AARCH64_ARCH_V8_4): ...here.
(AARCH64_ARCH_V8_5_FEATURES): New macro, split out from...
(AARCH64_ARCH_V8_5): ...here.
(AARCH64_ARCH_V8_6_FEATURES): New macro, split out from...
(AARCH64_ARCH_V8_6): ...here.
(AARCH64_ARCH_V8_7_FEATURES): New macro, split out from...
(AARCH64_ARCH_V8_7): ...here.
(AARCH64_ARCH_V8_8_FEATURES): New macro, split out from...
(AARCH64_ARCH_V8_8): ...here.
(AARCH64_ARCH_V9_FEATURES): New macro, split out from...
(AARCH64_ARCH_V9): ...here.
(AARCH64_ARCH_V9_1_FEATURES, AARCH64_ARCH_V9_1): New macros.
(AARCH64_ARCH_V9_2_FEATURES, AARCH64_ARCH_V9_2): New macros.
(AARCH64_ARCH_V9_3_FEATURES, AARCH64_ARCH_V9_3): New macros.
gas/
* doc/c-aarch64.texi: Add armv9.1-a, armv9-2-a and armv9.3-a.
* config/tc-aarch64.c (aarch64_archs): Likewise.
* NEWS: Mention the above.
* testsuite/gas/aarch64/armv9_invalid.d,
testsuite/gas/aarch64/armv9_invalid.s,
testsuite/gas/aarch64/armv9_invalid.l: New test.
* testsuite/gas/aarch64/armv9_1.d,
testsuite/gas/aarch64/armv9_1.s: Likewise.
* testsuite/gas/aarch64/armv9_1_invalid.d,
testsuite/gas/aarch64/armv9_1_invalid.s,
testsuite/gas/aarch64/armv9_1_invalid.l: Likewise.
* testsuite/gas/aarch64/armv9_2.d,
testsuite/gas/aarch64/armv9_2.s: Likewise.
* testsuite/gas/aarch64/armv9_2_invalid.d,
testsuite/gas/aarch64/armv9_2_invalid.s,
testsuite/gas/aarch64/armv9_2_invalid.l: Likewise.
* testsuite/gas/aarch64/armv9_3.d,
testsuite/gas/aarch64/armv9_3.s: Likewise.
According to the privileged spec, there are five new instructions for
svinval extension. Two of them (HINVAL.VVMA and HINVAL.GVMA) need to
enable the hypervisor extension. But there is no implementation of
hypervisor extension in mainline for now, so let's consider the related
issues later.
31..25 24..20 19..15 14..12 11...7 6..2 1..0
sinval.vma 0001011 rs2 rs1 000 00000 11100 11
sfence.w.inval 0001100 00000 00000 000 00000 11100 11
sfence.inval.ir 0001100 00001 00000 000 00000 11100 11
hinval.vvma 0010011 rs2 rs1 000 00000 11100 11
hinval.gvma 0110011 rs2 rs1 000 00000 11100 11
This patch is cherry-picked from the riscv integration branch since the
svinval extension is frozen for now. Besides, we fix the funct7 encodings
of hinval.vvma and hinval.gvma, from 0x0011011 and 0x0111011 to 0x0010011
and 0x0110011.
bfd/
* elfxx-riscv.c (riscv_supported_std_s_ext): Added svinval.
(riscv_multi_subset_supports): Handle INSN_CLASS_SVINVAL.
gas/
* testsuite/gas/riscv/svinval.d: New testcase.
* testsuite/gas/riscv/svinval.s: Likewise.
include/
* opcode/riscv-opc.h: Added encodings for svinval.
* opcode/riscv.h (enum riscv_insn_class): Added INSN_CLASS_SVINVAL.
opcodes/
* riscv-opc.c (riscv_opcodes): Added svinval instructions.
The MOPS instructions should be used as a triple, such as:
cpyfp [x0]!, [x1]!, x2!
cpyfm [x0]!, [x1]!, x2!
cpyfe [x0]!, [x1]!, x2!
The registers should also be the same for each writeback operand.
This patch adds a warning for code that doesn't follow this rule,
along similar lines to the warning that we already emit for
invalid uses of MOVPRFX.
include/
* opcode/aarch64.h (C_SCAN_MOPS_P, C_SCAN_MOPS_M, C_SCAN_MOPS_E)
(C_SCAN_MOPS_PME): New macros.
(AARCH64_OPDE_A_SHOULD_FOLLOW_B): New aarch64_operand_error_kind.
(AARCH64_OPDE_EXPECTED_A_AFTER_B): Likewise.
(aarch64_operand_error): Make each data value a union between
an int and a string.
opcodes/
* aarch64-tbl.h (MOPS_CPY_OP1_OP2_INSN): Add scan flags.
(MOPS_SET_OP1_OP2_INSN): Likewise.
* aarch64-opc.c (set_out_of_range_error): Update after change to
aarch64_operand_error.
(set_unaligned_error, set_reg_list_error): Likewise.
(init_insn_sequence): Use a 3-instruction sequence for
MOPS P instructions.
(verify_mops_pme_sequence): New function.
(verify_constraints): Call it.
* aarch64-dis.c (print_verifier_notes): Handle
AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B.
gas/
* config/tc-aarch64.c (operand_mismatch_kind_names): Add entries
for AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B.
(operand_error_higher_severity_p): Check that
AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B
come between AARCH64_OPDE_RECOVERABLE and AARCH64_OPDE_SYNTAX_ERROR;
their relative order is not significant.
(record_operand_error_with_data): Update after change to
aarch64_operand_error.
(output_operand_error_record): Likewise. Handle
AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B.
* testsuite/gas/aarch64/mops_invalid_2.s,
testsuite/gas/aarch64/mops_invalid_2.d,
testsuite/gas/aarch64/mops_invalid_2.l: New test.
This patch adds support for FEAT_MOPS, an Armv8.8-A extension
that provides memcpy and memset acceleration instructions.
I took the perhaps controversial decision to generate the individual
instruction forms using macros rather than list them out individually.
This becomes useful with a follow-on patch to check that code follows
the correct P/M/E sequence.
[https://developer.arm.com/documentation/ddi0596/2021-09/Base-Instructions?lang=en]
include/
* opcode/aarch64.h (AARCH64_FEATURE_MOPS): New macro.
(AARCH64_ARCH_V8_8): Make armv8.8-a imply AARCH64_FEATURE_MOPS.
(AARCH64_OPND_MOPS_ADDR_Rd): New aarch64_opnd.
(AARCH64_OPND_MOPS_ADDR_Rs): Likewise.
(AARCH64_OPND_MOPS_WB_Rn): Likewise.
opcodes/
* aarch64-asm.h (ins_x0_to_x30): New inserter.
* aarch64-asm.c (aarch64_ins_x0_to_x30): New function.
* aarch64-dis.h (ext_x0_to_x30): New extractor.
* aarch64-dis.c (aarch64_ext_x0_to_x30): New function.
* aarch64-tbl.h (aarch64_feature_mops): New feature set.
(aarch64_feature_mops_memtag): Likewise.
(MOPS, MOPS_MEMTAG, MOPS_INSN, MOPS_MEMTAG_INSN)
(MOPS_CPY_OP1_OP2_PME_INSN, MOPS_CPY_OP1_OP2_INSN, MOPS_CPY_OP1_INSN)
(MOPS_CPY_INSN, MOPS_SET_OP1_OP2_PME_INSN, MOPS_SET_OP1_OP2_INSN)
(MOPS_SET_INSN): New macros.
(aarch64_opcode_table): Add MOPS instructions.
(aarch64_opcode_table): Add entries for AARCH64_OPND_MOPS_ADDR_Rd,
AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn.
* aarch64-opc.c (aarch64_print_operand): Handle
AARCH64_OPND_MOPS_ADDR_Rd, AARCH64_OPND_MOPS_ADDR_Rs and
AARCH64_OPND_MOPS_WB_Rn.
(verify_three_different_regs): New function.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
gas/
* doc/c-aarch64.texi: Document +mops.
* config/tc-aarch64.c (parse_x0_to_x30): New function.
(parse_operands): Handle AARCH64_OPND_MOPS_ADDR_Rd,
AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn.
(aarch64_features): Add "mops".
* testsuite/gas/aarch64/mops.s, testsuite/gas/aarch64/mops.d: New test.
* testsuite/gas/aarch64/mops_invalid.s,
* testsuite/gas/aarch64/mops_invalid.d,
* testsuite/gas/aarch64/mops_invalid.l: Likewise.
This patch adds skeleton support for -march=armv8.8-a, testing only
that it correctly inherits from armv8.7-a.
include/
* opcode/aarch64.h (AARCH64_FEATURE_V8_8): New macro.
(AARCH64_ARCH_V8_8): Likewise.
gas/
* doc/c-aarch64.texi: Document armv8.8-a.
* config/tc-aarch64.c (aarch64_archs): Add armv8-8-a
* testsuite/gas/aarch64/v8-8-a.s,
* testsuite/gas/aarch64/v8-8-a.d: New test.
libopcodes has some code to check constraints across sequences
of consecutive instructions. It was added to support MOVPRFX
sequences but is going to be useful for the Armv8.8-A MOPS
feature as well.
Currently the structure has one field to record the instruction
that started a sequence and another to record the remaining
instructions in the sequence. It's more convenient for the
MOPS code if we put the instructions into a single array instead.
No functional change intended.
include/
* opcode/aarch64.h (aarch64_instr_sequence): Replace num_insns
and current_insns with num_added_insns and num_allocated_insns.
opcodes/
* aarch64-opc.c (add_insn_to_sequence): New function.
(init_insn_sequence): Update for new aarch64_instr_sequence layout.
Add the first instruction to the inst array.
(verify_constraints): Update for new aarch64_instr_sequence layout.
Don't add the last instruction to the array.
According the rvv spec,
https://github.com/riscv/riscv-v-spec/blob/master/vtype-format.adoc
The bits of vtype immediate from 8 to (xlen - 1) should be reserved.
Therefore, we should also dump the vtype immediate as numbers, when
they are set over 8-bits. I think this is a bug that we used to support
vediv extension and use the bit 8 and 9 of vtype, but forgot to update
the behavior when removing the vediv.
Consider the testcases,
vsetvli a0, a1, 0x700 # the reserved bit 10, 9 and 8 are used.
vsetvli a0, a1, 0x400 # the reserved bit 10 is used.
vsetvli a0, a1, 0x300 # the reserved bit 9 and 8 are used.
vsetvli a0, a1, 0x100 # the reserved bit 8 is used.
vsetivli a0, 0xb, 0x300 # the reserved bit 9 and 8 are used.
vsetivli a0, 0xb, 0x100 # the reserved bit 8 is used.
The original objdump shows the following result,
0000000000000000 <.text>:
0: 7005f557 vsetvli a0,a1,1792
4: 4005f557 vsetvli a0,a1,1024
8: 3005f557 vsetvli a0,a1,e8,m1,tu,mu
c: 1005f557 vsetvli a0,a1,e8,m1,tu,mu
10: f005f557 vsetivli a0,11,e8,m1,tu,mu
14: d005f557 vsetivli a0,11,e8,m1,tu,mu
But in fact the correct result should be,
0000000000000000 <.text>:
0: 7005f557 vsetvli a0,a1,1792
4: 4005f557 vsetvli a0,a1,1024
8: 3005f557 vsetvli a0,a1,768
c: 1005f557 vsetvli a0,a1,256
10: f005f557 vsetivli a0,11,768
14: d005f557 vsetivli a0,11,256
gas/
* testsuite/gas/riscv/vector-insns.d: Added testcases to
test the reserved bit 8 to (xlen-1) of vtype.
* testsuite/gas/riscv/vector-insns.s: Likewise.
include/
* opcode/riscv.h: Removed OP_MASK_VTYPE_RES and OP_SH_VTYPE_RES,
since they are different for operand Vc and Vb.
opcodes/
* riscv-dis.c (print_insn_args): Updated imm_vtype_res to
extract the reserved immediate of vtype correctly.
Reuse float instructions in INSN_CLASS_F/D/Q, use riscv_subset_supports to
verify if z*inx enabled and use gpr instead of fpr when z*inx is enable.
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Added support for
z*inx extension.
gas/ChangeLog:
* config/tc-riscv.c (riscv_ip): Added register choice for z*inx.
include/ChangeLog:
* opcode/riscv.h (enum riscv_insn_class): Reused INSN_CLASS_* for z*inx.
opcodes/ChangeLog:
* riscv-dis.c (riscv_disassemble_insn): Added disassemble check for
z*inx.
* riscv-opc.c: Reused INSN_CLASS_* for z*inx.
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch is adding new SVE2 instructions added to support SME extension.
The following SVE2 instructions are added by the SME architecture:
* PSEL,
* REVD, SCLAMP and UCLAMP.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_pred_reg_with_index):
New parser.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-9-illegal.d: New test.
* testsuite/gas/aarch64/sme-9-illegal.l: New test.
* testsuite/gas/aarch64/sme-9-illegal.s: New test.
* testsuite/gas/aarch64/sme-9.d: New test.
* testsuite/gas/aarch64/sme-9.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_PnT_Wm_imm.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_pred_reg_with_index):
New inserter.
* aarch64-dis.c (aarch64_ext_sme_pred_reg_with_index):
New extractor.
* aarch64-opc.c (aarch64_print_operand): Printout of
OPND_SME_PnT_Wm_imm.
* aarch64-opc.h (enum aarch64_field_kind): New bitfields
FLD_SME_Rm, FLD_SME_i1, FLD_SME_tszh, FLD_SME_tszl.
* aarch64-tbl.h (OP_SVE_NN_BHSD): New qualifier.
(OP_SVE_QMQ): New qualifier.
(struct aarch64_opcode): New instructions PSEL, REVD,
SCLAMP and UCLAMP.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding new SME mode selection and state access instructions:
* Add SMSTART and SMSTOP instructions.
* Add SVCR system register.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_sm_za): New parser.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-8-illegal.d: New test.
* testsuite/gas/aarch64/sme-8-illegal.l: New test.
* testsuite/gas/aarch64/sme-8-illegal.s: New test.
* testsuite/gas/aarch64/sme-8.d: New test.
* testsuite/gas/aarch64/sme-8.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_SM_ZA.
(enum aarch64_insn_class): New instruction classes
sme_start and sme_stop.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_pstatefield): New inserter.
(aarch64_ins_sme_sm_za): New inserter.
* aarch64-dis.c (aarch64_ext_imm): New extractor.
(aarch64_ext_pstatefield): New extractor.
(aarch64_ext_sme_sm_za): New extractor.
* aarch64-opc.c (operand_general_constraint_met_p):
New pstatefield value for SME instructions.
(aarch64_print_operand): Printout for OPND_SME_SM_ZA.
(SR_SME): New register SVCR.
* aarch64-opc.h (F_REG_IN_CRM): New register endcoding.
* aarch64-opc.h (F_IMM_IN_CRM): New immediate endcoding.
(PSTATE_ENCODE_CRM): Encode CRm field.
(PSTATE_DECODE_CRM): Decode CRm field.
(PSTATE_ENCODE_CRM_IMM): Encode CRm immediate field.
(PSTATE_DECODE_CRM_IMM): Decode CRm immediate field.
(PSTATE_ENCODE_CRM_AND_IMM): Encode CRm and immediate
field.
* aarch64-tbl.h (struct aarch64_opcode): New SMSTART
and SMSTOP instructions.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding new loads and stores defined by SME instructions.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_address): New parser.
(parse_sme_za_hv_tiles_operand_with_braces): New parser.
(parse_sme_za_array): New parser.
(output_operand_error_record): Print error details if
present.
(parse_operands): Support new operands.
* testsuite/gas/aarch64/sme-5-illegal.d: New test.
* testsuite/gas/aarch64/sme-5-illegal.l: New test.
* testsuite/gas/aarch64/sme-5-illegal.s: New test.
* testsuite/gas/aarch64/sme-5.d: New test.
* testsuite/gas/aarch64/sme-5.s: New test.
* testsuite/gas/aarch64/sme-6-illegal.d: New test.
* testsuite/gas/aarch64/sme-6-illegal.l: New test.
* testsuite/gas/aarch64/sme-6-illegal.s: New test.
* testsuite/gas/aarch64/sme-6.d: New test.
* testsuite/gas/aarch64/sme-6.s: New test.
* testsuite/gas/aarch64/sme-7-illegal.d: New test.
* testsuite/gas/aarch64/sme-7-illegal.l: New test.
* testsuite/gas/aarch64/sme-7-illegal.s: New test.
* testsuite/gas/aarch64/sme-7.d: New test.
* testsuite/gas/aarch64/sme-7.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operands.
(enum aarch64_insn_class): Added sme_ldr and sme_str.
(AARCH64_OPDE_UNTIED_IMMS): New operand error kind.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_za_hv_tiles): New inserter.
(aarch64_ins_sme_za_list): New inserter.
(aarch64_ins_sme_za_array): New inserter.
(aarch64_ins_sme_addr_ri_u4xvl): New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): Added
ins_sme_za_list, ins_sme_za_array and ins_sme_addr_ri_u4xvl.
* aarch64-dis.c (aarch64_ext_sme_za_hv_tiles): New extractor.
(aarch64_ext_sme_za_list): New extractor.
(aarch64_ext_sme_za_array): New extractor.
(aarch64_ext_sme_addr_ri_u4xvl): New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): Added
ext_sme_za_list, ext_sme_za_array and ext_sme_addr_ri_u4xvl.
* aarch64-opc.c (operand_general_constraint_met_p):
(aarch64_match_operands_constraint): Handle sme_ldr, sme_str
and sme_misc.
(aarch64_print_operand): New operands supported.
* aarch64-tbl.h (OP_SVE_QUU): New qualifier.
(OP_SVE_QZU): New qualifier.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding ZERO (a list of 64-bit element ZA tiles)
instruction.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_list_of_64bit_tiles):
New parser.
(parse_operands): Handle OPND_SME_list_of_64bit_tiles.
* testsuite/gas/aarch64/sme-4-illegal.d: New test.
* testsuite/gas/aarch64/sme-4-illegal.l: New test.
* testsuite/gas/aarch64/sme-4-illegal.s: New test.
* testsuite/gas/aarch64/sme-4.d: New test.
* testsuite/gas/aarch64/sme-4.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_list_of_64bit_tiles.
opcodes/ChangeLog:
* aarch64-opc.c (print_sme_za_list): New printing function.
(aarch64_print_operand): Handle OPND_SME_list_of_64bit_tiles.
* aarch64-opc.h (enum aarch64_field_kind): New bitfield
FLD_SME_zero_mask.
* aarch64-tbl.h (struct aarch64_opcode): New ZERO instruction.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding new MOV (alias) and MOVA SME instruction.
gas/ChangeLog:
* config/tc-aarch64.c (enum sme_hv_slice): new enum.
(struct reloc_entry): Added ZAH and ZAV registers.
(parse_sme_immediate): Immediate parser.
(parse_sme_za_hv_tiles_operand): ZA tile parser.
(parse_sme_za_hv_tiles_operand_index): Index parser.
(parse_operands): Added ZA tile parser calls.
(REGNUMS): New macro. Regs with suffix.
(REGSET16S): New macro. 16 regs with suffix.
* testsuite/gas/aarch64/sme-2-illegal.d: New test.
* testsuite/gas/aarch64/sme-2-illegal.l: New test.
* testsuite/gas/aarch64/sme-2-illegal.s: New test.
* testsuite/gas/aarch64/sme-2.d: New test.
* testsuite/gas/aarch64/sme-2.s: New test.
* testsuite/gas/aarch64/sme-2a.d: New test.
* testsuite/gas/aarch64/sme-2a.s: New test.
* testsuite/gas/aarch64/sme-3-illegal.d: New test.
* testsuite/gas/aarch64/sme-3-illegal.l: New test.
* testsuite/gas/aarch64/sme-3-illegal.s: New test.
* testsuite/gas/aarch64/sme-3.d: New test.
* testsuite/gas/aarch64/sme-3.s: New test.
* testsuite/gas/aarch64/sme-3a.d: New test.
* testsuite/gas/aarch64/sme-3a.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New enums
AARCH64_OPND_SME_ZA_HV_idx_src and
AARCH64_OPND_SME_ZA_HV_idx_dest.
(struct aarch64_opnd_info): New ZA tile vector struct.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_za_hv_tiles):
New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER):
New inserter ins_sme_za_hv_tiles.
* aarch64-dis.c (aarch64_ext_sme_za_hv_tiles):
New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR):
New extractor ext_sme_za_hv_tiles.
* aarch64-opc.c (aarch64_print_operand):
Handle SME_ZA_HV_idx_src and SME_ZA_HV_idx_dest.
* aarch64-opc.h (enum aarch64_field_kind): New enums
FLD_SME_size_10, FLD_SME_Q, FLD_SME_V and FLD_SME_Rv.
(struct aarch64_operand): Increase fields size to 5.
* aarch64-tbl.h (OP_SME_BHSDQ_PM_BHSDQ): New qualifiers
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
Patch is adding new SME matrix instructions. Please note additional
instructions will be added in following patches.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_zada_operand):
New parser.
* config/tc-aarch64.c (parse_reg_with_qual):
New reg parser.
* config/tc-aarch64.c (R_ZA): New egister type.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-illegal.d: New test.
* testsuite/gas/aarch64/sme-illegal.l: New test.
* testsuite/gas/aarch64/sme-illegal.s: New test.
* testsuite/gas/aarch64/sme.d: New test.
* testsuite/gas/aarch64/sme.s: New test.
* testsuite/gas/aarch64/sme-f64.d: New test.
* testsuite/gas/aarch64/sme-f64.s: New test.
* testsuite/gas/aarch64/sme-i64.d: New test.
* testsuite/gas/aarch64/sme-i64.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operands
AARCH64_OPND_SME_ZAda_2b, AARCH64_OPND_SME_ZAda_3b and
AARCH64_OPND_SME_Pm.
(enum aarch64_insn_class): New instruction class sme_misc.
opcodes/ChangeLog:
* aarch64-opc.c (aarch64_print_operand):
Print OPND_SME_ZAda_2b and OPND_SME_ZAda_3b operands.
(verify_constraints): Handle OPND_SME_Pm.
* aarch64-opc.h (enum aarch64_field_kind):
New bit fields FLD_SME_ZAda_2b, FLD_SME_ZAda_3b and FLD_SME_Pm.
* aarch64-tbl.h (OP_SME_ZADA_PN_PM_ZN_S): New qualifier set.
(OP_SME_ZADA_PN_PM_ZN_D): New qualifier.
(OP_SME_ZADA_PN_PM_ZN_ZM): New qualifier.
(OP_SME_ZADA_S_PM_PM_S_S): New qualifier.
(OP_SME_ZADA_D_PM_PM_D_D): New qualifier.
(OP_SME_ZADA_S_PM_PM_H_H): New qualifier.
(OP_SME_ZADA_S_PM_PM_B_B): New qualifier.
(OP_SME_ZADA_D_PM_PM_H_H): New qualifier.
(SME_INSN): New instruction macro.
(SME_F64_INSN): New instruction macro.
(SME_I64_INSN): New instruction macro.
(SME_INSNC): New instruction macro.
(struct aarch64_opcode): New SME instructions.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This series of patches (tagged [SME]) add support for the Scalable
Matrix Extension. Patch introduces new command line options: +sme, +sme-f64 and
+sme-i64 to -march command line options.
gas/ChangeLog:
* NEWS: Updated docs.
* config/tc-aarch64.c: New SME command line options.
* doc/c-aarch64.texi: Update docs.
include/ChangeLog:
* opcode/aarch64.h (AARCH64_FEATURE_SME): New flag.
(AARCH64_FEATURE_SME_F64): New flag.
(AARCH64_FEATURE_SME_I64): New flag.
opcodes/ChangeLog:
* aarch64-tbl.h (SME): New feature object.
2021-11-17 Jim Wilson <jimw@sifive.com>
Kito Cheng <kito.cheng@sifive.com>
Nelson Chu <nelson.chu@sifive.com>
This patch is porting from the following riscv github,
https://github.com/riscv/riscv-binutils-gdb/tree/rvv-1.0.x
And here is the vector spec,
https://github.com/riscv/riscv-v-spec
bfd/
* elfxx-riscv.c (riscv_implicit_subsets): Added imply rules
of v, zve and zvl extensions.
(riscv_supported_std_ext): Updated verison of v to 1.0.
(riscv_supported_std_z_ext): Added zve and zvl extensions.
(riscv_parse_check_conflicts): The zvl extensions need to
enable either v or zve extension.
(riscv_multi_subset_supports): Check the subset list to know
if the INSN_CLASS_V and INSN_CLASS_ZVEF instructions are supported.
gas/
* config/tc-riscv.c (enum riscv_csr_class): Added CSR_CLASS_V.
(enum reg_class): Added RCLASS_VECR and RCLASS_VECM.
(validate_riscv_insn): Check whether the rvv operands are valid.
(md_begin): Initialize register hash for rvv registers.
(macro_build): Added rvv operands when expanding rvv pseudoes.
(vector_macro): Expand rvv macros into one or more instructions.
(macro): Likewise.
(my_getVsetvliExpression): Similar to my_getVsetvliExpression,
but used for parsing vsetvli operands.
(riscv_ip): Parse and encode rvv operands. Besides, The rvv loads
and stores with EEW 64 cannot be used when zve32x is enabled.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Updated -march
to rv32ifv_zkr.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg.s: Added rvv csr testcases.
* testsuite/gas/riscv/priv-reg-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/march-imply-v.d: New testcase.
* testsuite/gas/riscv/vector-insns-fail-zve32xf.d: Likewise.
* testsuite/gas/riscv/vector-insns-fail-zve32xf.l: Likewise.
* testsuite/gas/riscv/vector-insns-fail-zvl.d: Likewise.
* testsuite/gas/riscv/vector-insns-fail-zvl.l: Likewise.
* testsuite/gas/riscv/vector-insns-vmsgtvx.d: Likewise.
* testsuite/gas/riscv/vector-insns-vmsgtvx.s: Likewise.
* testsuite/gas/riscv/vector-insns-zero-imm.d: Likewise.
* testsuite/gas/riscv/vector-insns-zero-imm.s: Likewise.
* testsuite/gas/riscv/vector-insns.d: Likewise.
* testsuite/gas/riscv/vector-insns.s: Likewise.
include/
* opcode/riscv-opc.h: Defined mask/match encodings and csrs for rvv.
* opcode/riscv.h: Defined rvv immediate encodings and fields.
(enum riscv_insn_class): Added INSN_CLASS_V and INSN_CLASS_ZVEF.
(INSN_V_EEW64): Defined.
(M_VMSGE, M_VMSGEU): Added for the rvv pseudoes.
opcodes/
* riscv-dis.c (print_insn_args): Dump the rvv operands.
* riscv-opc.c (riscv_vecr_names_numeric): Defined rvv registers.
(riscv_vecm_names_numeric): Likewise.
(riscv_vsew): Likewise.
(riscv_vlmul): Likewise.
(riscv_vta): Likewise.
(riscv_vma): Likewise.
(match_vs1_eq_vs2): Added for rvv Vu operand.
(match_vd_eq_vs1_eq_vs2): Added for rvv Vv operand.
(riscv_opcodes): Added rvv v1.0 instructions.
Add instructions in k-ext, some instruction in zbkb, zbkc is reuse from
zbb,zbc, we just change the class attribute to make them both support.
The 'aes64ks1i' and 'aes64ks2' instructions are present in both the Zknd
and Zkne extensions on rv64. Add new operand letter 'y' to present 'bs'
symbol and 'Y' to present 'rnum' symbolc for zkn instructions. Also add
a new Entropy Source CSR define 'seed' located at address 0x015.
bfd/
* elfxx-riscv.c (riscv_multi_subset_supports): Added support for
crypto extension.
gas/
*config/tc-riscv.c (enum riscv_csr_class): Added CSR_CLASS_ZKR.
(riscv_csr_address): Checked for CSR_CLASS_ZKR.
(validate_riscv_insn): Added y and Y for bs and rnum operands.
(riscv_ip): Handle y and Y operands.
include/
* opcode/riscv-opc.h: Added encodings of crypto instructions.
Also defined new csr seed, which address is 0x15.
* opcode/riscv.h: Defined OP_* and INSN_CLASS_* for crypto.
opcodes/
* riscv-dis.c (print_insn_args): Recognized new y and Y operands.
* riscv-opc.c (riscv_opcodes): Added crypto instructions.
