This patch removes libctf/mkerrors.sed, replacing it with a macro in
ctf-api.h. This simplifies the build and avoids possible unportable
code in the sed script.
2020-10-21 Tom Tromey <tromey@adacore.com>
* ctf-api.h (_CTF_ERRORS): New macro.
libctf/ChangeLog
2020-10-21 Tom Tromey <tromey@adacore.com>
* mkerrors.sed: Remove.
* ctf-error.c (_CTF_FIRST): New define.
(_CTF_ITEM): Define this, not _CTF_STR.
(_ctf_errlist, _ctf_erridx): Use _CTF_ERRORS.
(ERRSTRFIELD): Rewrite.
(ERRSTRFIELD1): Remove.
* Makefile.in: Rebuild.
* Makefile.am (BUILT_SOURCES): Remove.
(ctf-error.h): Remove.
HCR_EL2 is a 64-bit Hypervisor Configuration Register.
gas/ChangeLog:
2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* testsuite/gas/aarch64/sysreg-6.d: New test.
* testsuite/gas/aarch64/sysreg-6.s: New test.
* dwarf.c (skip_attr_bytes): Accept DWARF versions higher than 4
when processing the DW_FORM_ref_addr form.
Skip bytes in DW_FORM_block and DW_FORM_exprloc forms.
Handle DW_FORM_indirect.
(get_type_signedness): Allow a limited amount of recursion.
Do not attempt to decode types that use the DW_FORM_ref_addr form.
(read_and_display_attr_value): Do not attempt to decode types
that use the DW_FORM_ref_addr form.
This patch starts by making the gdbarch_make_corefile_notes function
return a gdb::unique_xmalloc_ptr<char> and takes care of the fallouts,
mostly in linux-tdep.c and fbsd-tdep.c.
The difficulty in these files is that they use the BFD API for writing
core files, where you pass in a pointer to a malloc-ed buffer (or NULL
in the beginning), it re-allocs it if needed, and returns you the
possibly updated pointer. I therefore used this pattern everywhere:
note_data.reset (elfcore_write_note (obfd, note_data.release (), ...)
This hands over the ownership of note_data to the BFD function for the
duration of the call, and then puts its back in note_data right after
the call.
gdb/ChangeLog:
* gdbarch.sh (make_corefile_notes): Return unique pointer.
* gdbarch.c: Re-generate.
* gdbarch.h: Re-generate.
* gcore.c (write_gcore_file_1): Adjust.
* fbsd-tdep.c (struct fbsd_collect_regset_section_cb_data): Add
constructor.
<note_data>: Change type to unique pointer.
<abort_iteration>: Change type to bool.
(fbsd_collect_regset_section_cb): Adjust to unique pointer.
(fbsd_collect_thread_registers): Return void, adjust.
(struct fbsd_corefile_thread_data): Add construtor.
<note_data>: Change type to unique pointer.
(fbsd_corefile_thread): Adjust.
(fbsd_make_corefile_notes): Return unique pointer, adjust.
* linux-tdep.c (linux_make_mappings_corefile_notes): Change type
to unique pointer, adjust.
(struct linux_collect_regset_section_cb_data): Add constructor.
<note_data>: Change type to unique pointer.
<abort_iteration>: Change type to bool.
(linux_collect_thread_registers): Return void, adjust.
(struct linux_corefile_thread_data): Add constructor.
<note_data>: Change type to unique pointer.
(linux_corefile_thread): Adjust.
(linux_make_corefile_notes): Return unique pointer, adjust.
Change-Id: I1e03476bb47b87c6acb3e12204d193f38cc4e02b
While trying to build on Cygwin (gcc 10.2.0), I got:
CXX server.o
/home/Baube/src/binutils-gdb/gdbserver/server.cc: In function 'void handle_general_set(char*)':
/home/Baube/src/binutils-gdb/gdbserver/server.cc:832:12: error: 'sprintf' argument 3 overlaps destination object 'own_buf' [-Werror=restrict]
832 | sprintf (own_buf, "E.Unknown thread-events mode requested: %s\n",
| ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
833 | mode);
| ~~~~~
/home/Baube/src/binutils-gdb/gdbserver/server.cc:553:27: note: destination object referenced by 'restrict'-qualified argument 1 was declared here
553 | handle_general_set (char *own_buf)
| ~~~~~~^~~~~~~
There is indeed a problem: mode points somewhere into own_buf. And by
the time mode gets formatted as a %s, whatever it points to has been
overwritten. I hacked gdbserver to coerce it into that error path, and
this is the resulting message:
(gdb) p own_buf
$1 = 0x629000000200 "E.Unknown thread-events mode requested: ad-events mode requested: 00;10:9020fdf7ff7f0000;thread:p49388.49388;core:e;\n"
Fix it by formatting the error string in an std::string first.
gdbserver/ChangeLog:
* server.cc (handle_general_set): Don't use sprintf with
argument overlapping buffer.
Change-Id: I4fdf05c0117f63739413dd67ddae7bd6ee414824
gdb.mi/mi-fullname-deleted.exp attempts to generate an executable
with a doubled slash in the source filename recorded in its debug
info. This attempt fails when compiling using Clang, causing the
substituted filename test to fail. This commit fixes this issue.
It also expands the comments in the file, to clarify what the test
is attempting to do, and to document where it doesn't succeed.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-fullname-deleted.exp: Fix substituted
fullname test with Clang. Also expand comments generally.
gdbarch predicates (functions suffixed _p to check whether a gdbarch
implements a given method) currently return int. Make them return bool.
There is no expected behavior change.
gdb/ChangeLog:
* gdbarch.sh: Make generated predicates return bool.
* gdbarch.c: Re-generate.
* gdbarch.h: Re-generate.
Change-Id: Ie7ebc1acae62df83da9085ba69327fca551c5a30
While working on some minor varobj cleanups, I noticed this obvious
one: the varobj_item typedef isn't redundant in C++, and so can be
removed.
gdb/ChangeLog
2020-10-20 Tom Tromey <tom@tromey.com>
* varobj-iter.h (struct varobj_item): Remove typedef.
PR gdb/26742 points out some undefined behavior in gdbserver. The bug
is that remove_thread does:
free_one_thread (thread);
if (current_thread == thread)
current_thread = NULL;
However, the equality check is undefined, because "thread" has already
been freed.
This patch fixes the bug by moving the check earlier.
Tested on x86-64 Fedora 32.
2020-10-20 Tom Tromey <tromey@adacore.com>
PR gdb/26742:
* inferiors.cc (remove_thread): Clear current_thread before
freeing the thread.
When looking at readelf output for test-case gdb.dwarf2/pr13961.exp, we have:
...
$ readelf -wi ./outputs/gdb.dwarf2/pr13961/pr13961
...
<0><14c>: Abbrev Number: 0
readelf: Warning: Bogus end-of-siblings marker detected at offset 14c in \
.debug_info section
...
Fix this by removing the superfluous end-of-siblings marker.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-20 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/pr13961.S: Remove superfluous end-of-siblings marker.
In gdb.dwarf2/ada-valprint-error.exp we find:
...
untested ${testfile}.exp
...
such that we have:
...
UNTESTED: gdb.dwarf2/ada-valprint-error.exp: ada-valprint-error.exp
...
Fix this and a likewise unsupported message in
gdb.dwarf2/dw2-dir-file-name.exp.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-20 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/ada-valprint-error.exp: Remove redundant mention of .exp
file.
* gdb.dwarf2/dw2-dir-file-name.exp: Same.
In f.i. gdb.dwarf2/dw2-line-number-zero.exp we find:
...
verbose "Skipping dw2-line-number-zero test."
...
Make the skip messages use the gdb_test_file_name variable, to reduce the
amount of changes that needs to be made when coping a test-case.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-20 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/dw2-error.exp: Use $gdb_test_file_name.
* gdb.dwarf2/dw2-line-number-zero.exp: Same.
* gdb.dwarf2/dw2-main-no-line-number.exp: Same.
* gdb.dwarf2/dw2-ranges-base.exp: Same.
* gdb.dwarf2/dw2-ranges.exp: Same.
* gdb.dwarf2/dw2-vendor-extended-opcode.exp: Same.
* gdb.dwarf2/var-access.exp: Same.
Using gcc-10 or current mainline gcc, binutils configured with
--disable-nls results in:
readelf.c: In function 'display_lto_symtab':
readelf.c:12283:26: error: offset '17' outside bounds of constant string [-Werror=array-bounds]
12283 | SECTION_NAME (section) + strlen (".gnu.lto_.symtab.")) > 0
| ^
Which is actually a bogus warning in this case because we've already
checked the name string for validity, so SECTION_NAME won't ever be
"<none>", "<no-strings>" or "<corrupt>". This patch fixes the problem
by making SECTION_NAME simply return the string from the string table.
Other places also shouldn't be trying to match any of the error
strings against a section name, so fix them too.
* readelf.c: Delete whitespace at end of line throughout.
(SECTION_NAME, SECTION_NAME_VALID): New.
(SECTION_NAME_PRINT): Rename from SECTION_NAME. Formatting.
(printable_section_name, dump_relocations): Use SECTION_NAME_PRINT.
(process_section_headers, process_section_groups): Likewise.
(shdr_to_ctf_sect): Likewise.
(find_section, find_section_in_set): Use SECTION_NAME_VALID.
(ia64_process_unwind, hppa_process_unwind): Likewise.
(display_debug_section, initialise_dumps_byname): Likewise.
(process_lto_symbol_tables): Likewise. Check trailing period of
lto symbol table names.
(display_lto_symtab): Use sizeof instead of strlen.
PR tui/26719 points out that switching the focus can erase the TUI
source window. This is a regression introduced by the patch to switch
the source window to using a pad.
This patch fixes the bug by arranging to call prefresh whenever the
window is refreshed.
2020-10-19 Tom Tromey <tromey@adacore.com>
PR tui/26719
* tui/tui-winsource.h (struct tui_source_window_base)
<refresh_window>: Rename from refresh_pad.
* tui/tui-winsource.c (tui_source_window_base::refresh_window):
Rename from refresh_pad.
(tui_source_window_base::show_source_content)
(tui_source_window_base::do_scroll_horizontal): Update.
gdb/testsuite/ChangeLog
2020-10-19 Tom Tromey <tromey@adacore.com>
PR tui/26719
* gdb.tui/list.exp: Check source window contents after focus
change.
The help text of 'info threads' is below:
(gdb) help info threads
Display currently known threads.
Usage: info threads [OPTION]... [ID]...
Options:
-gid
Show global thread IDs.If ID is given, it is a space-separated list of IDs of threads to display.
Otherwise, all threads are displayed.
(gdb)
I think the "If ID is given ..." info should have come right below
the the usage line. This patch reorganizes the text so that we get
(gdb) help info threads
Display currently known threads.
Usage: info threads [OPTION]... [ID]...
If ID is given, it is a space-separated list of IDs of threads to display.
Otherwise, all threads are displayed.
Options:
-gid
Show global thread IDs.
(gdb)
gdb/ChangeLog:
2020-10-19 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* thread.c (_initialize_thread): Fine-tune the help text of
'info threads'.
Tested by rebuilding.
gdb/ChangeLog:
2020-10-19 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* frame.c: Remove the unused 'uinteger_option_def' type alias.
This fixes a regression introduced by the following commit:
fe053b9e85 gdb/jit: pass the jiter objfile as an argument to jit_event_handler
In the refactoring `handle_jit_event` function was changed to pass a matching
objfile pointer to the `jit_event_handler` explicitly, rather using internal
storage:
```
--- a/gdb/breakpoint.c
+++ b/gdb/breakpoint.c
@@ -5448,8 +5448,9 @@ handle_jit_event (void)
frame = get_current_frame ();
gdbarch = get_frame_arch (frame);
+ objfile *jiter = symbol_objfile (get_frame_function (frame));
- jit_event_handler (gdbarch);
+ jit_event_handler (gdbarch, jiter);
```
This was needed to add support for multiple jiters. However it has also
introduced a regression, because `get_frame_function (frame)` here may
return `nullptr`, resulting in a crash.
A more resilient way would be to use an approach mirroring
`jit_breakpoint_re_set` - to find a minimal symbol matching the
breakpoint location and use its object file. We know that this
breakpoint event comes from a breakpoint set by `jit_breakpoint_re_set`,
thus using the reverse approach should be reliable enough.
gdb/Changelog:
2020-10-14 Mihails Strasuns <mihails.strasuns@intel.com>
* breakpoint.c (handle_jit_event): Add an argument, change how
`jit_event_handler` is called.
* readelf.c (do_lto_syms): New local.
(long_option_values): Add OPTION_LTO_SYMS.
(options): Add --lto-syms.
(usage): Mention the new option.
(parse_args): Parse the new option.
(get_lto_kind): New function.
(get_lto_visibility): New function.
(get_lto_sym_type): New function.
(display_lto_symtab): New function - displays the contents of an
LTo symbol table section.
(process_lto_symbol_tables): New functions. Calls
dipslay_lto_symtab on any LTO symbol table section.
(process_object_file): Call process_lto_symbol_tables.
* doc/binutils.texi: Document the new option.
* NEWS: Mention the new feature.
alpha-dec-vms always loads a number of libraries, -limagelib,
-lstarlet, and -lsys$public_vectors. When running the ld testsuite
without a full cross-build environment, those libraries are missing
and cause fails. This patch provides dummies, and tidies default.exp
a little.
* testsuite/config/default.exp: Provide dummy libraries for
alpha-dec-vms.
(compiler_supports): New proc. Use it for compiler tests.
* testsuite/lib/ld-lib.exp (default_ld_assemble): Don't die if
subdir not set.
(run_ld_link_tests): Pass LDFLAGS to ld.
* testsuite/ld-checks/checks.exp (section_check): Likewise.
* testsuite/ld-scripts/assert.exp: Likewise.
* testsuite/ld-scripts/extern.exp: Likewise.
* testsuite/ld-scripts/log2.exp: Likewise.
* testsuite/ld-scripts/map-address.exp: Likewise.
* testsuite/ld-scripts/script.exp: Likewise.
* testsuite/ld-scripts/sizeof.exp: Likewise.
Currently pointers to all partial symbols are stored in two vectors;
and then indices into these vectors are stored in each partial_symtab.
This patch changes this so that each partial symtab instead has
vectors of symbols. add_psymbol_to_list can now be changed into a
method on partial_symtab as well.
My main motivation for doing this is that I am looking into calling
sort_pst_symbols in the background. However, I haven't actually
implemented this yet. (Also this may make it more feasible to also
sort the static psymbols, though I haven't tried that either.)
Also, though, this lets us remove the "current_global_psymbols"
vector, because now the callers can simply refer directly to the
psymtab that they are modifying (formerly this was implicit).
The main drawback of this patch is that it increases the size of
partial symtab.
gdb/ChangeLog
2020-10-17 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_end_psymtab): Use partial_symtab::empty.
(scan_xcoff_symtab): Update.
* psymtab.h (class psymtab_storage) <global_psymbols,
static_psymbols, current_global_psymbols,
current_static_psymbols>: Remove.
* psymtab.c (require_partial_symbols, find_pc_sect_psymbol)
(match_partial_symbol, lookup_partial_symbol): Update.
(print_partial_symbols): Change parameters.
(dump_psymtab, recursively_search_psymtabs)
(psym_fill_psymbol_map, psym_find_compunit_symtab_by_address)
(sort_pst_symbols, partial_symtab::partial_symtab): Update.
(concat): Remove.
(end_psymtab_common): Simplify.
(append_psymbol_to_list): Change parameters.
(partial_symtabs::add_psymbol): Rename from add_psymbol_to_list.
(init_psymbol_list): Simplify.
(maintenance_info_psymtabs, maintenance_check_psymtabs): Update.
* psympriv.h (struct partial_symtab) <empty>: New method.
<globals_offset, n_global_syms, statics_offset, n_static_syms>:
Remove.
<global_psymbols, static_psymbols>: New members.
<add_psymbol>: New methods.
(add_psymbol_to_list): Don't declare.
(psymbol_placement): Move earlier.
* mdebugread.c (parse_partial_symbols): Update.
(handle_psymbol_enumerators): Change parameters.
(mdebug_expand_psymtab): Update.
* dwarf2/read.c (process_psymtab_comp_unit_reader)
(add_partial_symbol): Update.
* dwarf2/index-write.c (write_psymbols): Change parameters.
(write_one_signatured_type): Update.
(recursively_count_psymbols): Update.
(recursively_write_psymbols): Update.
(class debug_names) <recursively_write_psymbols>: Update.
<write_psymbols>: Change parameters.
<write_one_signatured_type>: Update.
* dbxread.c (read_dbx_symtab): Update.
(dbx_end_psymtab): Use partial_symtab::empty.
* ctfread.c (struct ctf_context) <pst>: New member.
(create_partial_symtab): Set it.
(ctf_psymtab_type_cb, ctf_psymtab_var_cb): Update.
(scan_partial_symbols): Use the psymtab's context. Update.
I ran across this comment in valprint.c:
/* FIXME: create_static_range_type does not set the unsigned bit in a
range type (I think it probably should copy it from the target
type), so we won't print values which are too large to
fit in a signed integer correctly. */
It seems to me that a range type ought to inherit its signed-ness from
the underlying type, so this patch implements this change, and removes
the comment. (It was also copied into m2-valprint.c.)
I also remove the comment about handling ranges of enums, because I
think that comment is incorrect.
gdb/ChangeLog
2020-10-17 Tom Tromey <tom@tromey.com>
* valprint.c (generic_value_print): Remove comment.
* m2-valprint.c (m2_value_print_inner): Remove comment.
* gdbtypes.c (create_range_type): Set TYPE_UNSIGNED from base
type.
Always clear the slot 1 if it was assigned to the input file before the
first .file <NUMBER> directive has been seen. Always use as_where to
generate the correct debug infor for preprocessed assembly codes.
PR gas/25878
PR gas/26740
* dwarf2dbg.c (allocate_filename_to_slot): Don't reuse the slot 1
here.
(dwarf2_where): Restore as_where.
(dwarf2_directive_filename): Clear the slot 1 if it was assigned
to the input file.
* testsuite/gas/i386/dwarf5-line-2.d: New file.
* testsuite/gas/i386/dwarf5-line-2.s: Likewise.
* testsuite/gas/i386/dwarf5-line-3.d: Likewise.
* testsuite/gas/i386/dwarf5-line-3.s: Likewise.
* testsuite/gas/i386/i386.exp: Run dwarf5-line-2 and
dwarf5-line-3.
When setting a breakpoint on a line in an executable without debug line info,
we run into an abort.
The problem occurs when calling set_default_source_symtab_and_line, which
calls select_source_symtab (0), which is where we try to find the line number
for main:
...
/* Make the default place to list be the function `main'
if one exists. */
block_symbol bsym = lookup_symbol (main_name (), 0, VAR_DOMAIN, 0);
if (bsym.symbol != nullptr && SYMBOL_CLASS (bsym.symbol) == LOC_BLOCK)
{
symtab_and_line sal = find_function_start_sal (bsym.symbol, true);
loc->set (sal.symtab, std::max (sal.line - (lines_to_list - 1), 1));
return;
}
...
However, due to the missing debug line info, find_function_start_sal returns a
sal with sal.symtab == 0:
...
(gdb) p /x sal
$2 = {pspace = 0x1a4a7f0, symtab = 0x0, symbol = 0x1d9e480, section = 0x1d5b398,
msymbol = 0x0, line = 0x0, pc = 0x4004ab, end = 0x0, explicit_pc = 0x0,
explicit_line = 0x0, is_stmt = 0x0, prob = 0x0, objfile = 0x0}
...
which eventually causes an segfault in create_sals_line_offset because
self->default_symtab->filename is accessed while self->default_symtab == NULL.
Fix this by handling sal.symtab == NULL in select_source_symtab.
Tested on x86_64-linux.
gdb/ChangeLog:
2020-10-17 Tom de Vries <tdevries@suse.de>
PR symtab/26317
* source.c (select_source_symtab): Handling sal.symtab == NULL for
symbol main.
gdb/testsuite/ChangeLog:
2020-10-17 Tom de Vries <tdevries@suse.de>
PR symtab/26317
* gdb.dwarf2/dw2-main-no-line-number.exp: New file.
I wanted to write a linker script like this:
PROVIDE(mem_origin = 0x1000);
PROVIDE(mem_length = 0x1000);
MEMORY
{
REGION : ORIGIN = mem_origin, LENGTH = mem_length
}
....
Then when I link using this script I can optionally supply:
--defsym=mem_origin=..... --defsym=mem_length=....
to override the defaults.
And though passing `--defsym' does work, if I remove the use of
`--defsym' and just rely on the defaults I get an error:
ld-new: invalid origin for memory region REGION
Interestingly, if I make the above error non-fatal and dump a linker
map file I see that (a) REGION has origin 0x0, and length 0xffff...,
and (b) the symbol from the PROVIDE is provided.
An examination of ldlang.c:lang_process shows us what the issue is,
the origin and length of all memory regions are set as a result of a
single call to lang_do_memory_regions, this call is done after calling
open_input_bfds.
During the open_input_bfds call provide statements can be converted to
provided statements if we know that the assigned symbol is needed, but
for symbols that are only used in the memory regions we are unaware
that we need these symbols.
What I propose in this patch is to make two calls to
lang_do_memory_regions, in the first call we process the expressions
for the origin and length fields of each region, however, errors,
especially undefined symbols, will be ignored. The origin and length
values are not updated. However, by evaluating the expressions any
symbols we need will be added to the symbol table.
Now when we call open_input_bfds, when we process the provide
statements, we will see that the assigned symbol is needed add its new
value to the symbol table.
Finally we reach the original call to lang_do_memory_regions, in
this (now second) call we again process the expressions, and this time
update the origin and length values. Any errors encountered now are
reported to the user.
ld/ChangeLog:
* ldlang.c (lang_process): Add extra call to
lang_do_memory_regions, and pass parameter.
(lang_do_memory_regions): Add parameter, only define origin and
length when requested. Reindent.
* testsuite/ld-scripts/provide-10.d: New file.
* testsuite/ld-scripts/provide-10.map: New file.
* testsuite/ld-scripts/provide-11.d: New file.
* testsuite/ld-scripts/provide-11.map: New file.
* testsuite/ld-scripts/provide-12.d: New file.
* testsuite/ld-scripts/provide-12.map: New file.
* testsuite/ld-scripts/provide-9.d: New file.
* testsuite/ld-scripts/provide-9.map: New file.
* testsuite/ld-scripts/provide-9.t: New file.
The ordering of command line options --defsym and -T is important,
however, the description of --defsym in the manual doesn't mention
this.
This commit adds more text to the description of --defsym to try and
explain this ordering requirement.
ld/ChangeLog:
* ld.texi (Options): Extend the description of --defsym.
Some instructions can be emitted (dwarf2_emit_insn is called) before the
first .file <NUMBER> directive has been seen, which allocates the input
file as the first file entry. Reuse the input file entry in the file
table.
PR gas/25878
PR gas/26740
* dwarf2dbg.c (file_entry): Remove auto_assigned.
(assign_file_to_slot): Remove the auto_assign argument.
(allocate_filenum): Updated.
(allocate_filename_to_slot): Reuse the input file entry in the
file table.
(dwarf2_where): Replace as_where with as_where_physical.
* testsuite/gas/i386/dwarf5-line-1.d: New file.
* testsuite/gas/i386/dwarf5-line-1.s: Likewise.
* testsuite/gas/i386/i386.exp: Run dwarf5-line-1.
PR 26626
* ldmain.c (undefined_symbol): If an error handlign script is
available, call it.
* ldfile.c (error_handling_script): Declare.
(ldfile_open_file): If a library cannot be found and an error
handling script is available, call it.
* ldmain.h (error_handling_script): Prototype.
* ldlex.h (OPTION_ERROR_HANDLING_SCRIPT): Define.
* lexsup.c (ld_options): Add --error-handling-script.
(parse_args): Add support for --errror-handling-script.
* ld.texi: Document the new feature.
* configure.ac: Add --error-handling-script option to disable
support for the new feature.
* NEWS: Mention the new feature.
* config.in: Regenerate.
* configure: Regenerate.
Commit 5b7d00507b adds a mention at gdb_breakpoint of a supported argument
"passfail". There's no corresponding argument handling though.
Remove the mention of the "passfail" argument.
gdb/testsuite/ChangeLog:
2020-10-16 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (gdb_breakpoint): Remove mention of "passfail".
I noticed that an abort when setting a breakpoint does not result in more
than:
...
(gdb) break 27^M
FAIL: gdb.a/b.exp: setting breakpoint at 27 (eof)
...
Handle this more verbosely, as is done in gdb_test_multiple, such that we have
instead:
...
(gdb) break 27^M
ERROR: GDB process no longer exists
GDB process exited with wait status 29309 exp9 0 0 CHILDKILLED SIGABRT SIGABRT
UNRESOLVED: gdb.a/b.exp: setting breakpoint at 27 (eof)
...
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-10-16 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (gdb_breakpoint): Handle eof as in gdb_test_multiple.
For the ifunc symbol, which is referenced by GOT rather than PLT relocs,
we should add the dynamic reloc (usually IRELATIVE) into the .rel.iplt
when generating the static executable. But if we use riscv_elf_append_rela
to add the dynamic relocs into .rela.iplt, this may cause the overwrite
problem.
The reason is that we don't handle the `reloc_index` of .rela.iplt, but
the riscv_elf_append_rela adds the relocs to the place that are calculated
from the reloc_index (in seqential). Therefore, we may overwrite the
dynamic relocs when the `reloc_index` of .rela.iplt isn't handled correctly.
One solution is that we can add these dynamic relocs (GOT ifunc) from
the last of .rela.iplt section. But I'm not sure if it is the best way.
bfd/
* elfnn-riscv.c (riscv_elf_link_hash_table): Add last_iplt_index.
(riscv_elf_size_dynamic_sections): Initialize the last_iplt_index.
(riscv_elf_relocate_section): Use riscv_elf_append_rela.
(riscv_elf_finish_dynamic_symbol): If the use_elf_append_rela is
false, then we should add the dynamic relocs from the last of
the .rela.iplt, and don't use the riscv_elf_append_rela to add.
ld/
* testsuite/ld-riscv-elf/ifunc-plt-got-overwrite.s: New testcase.
* testsuite/ld-riscv-elf/ifunc-plt-got-overwrite.d: Likewise.
* testsuite/ld-riscv-elf/ifunc-plt-got-overwrite-exe.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-plt-got-overwrite-pic.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-plt-got-overwrite-pie.rd: Likewise.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
Generally, glibc dynamic linker should have two ways to deal with ifunc
- one is to handle the IRELATIVE relocations for the non-preemtive ifunc
symbols, the other is to handle the R_RISCV_32/64 and R_RISCV_JUMP_SLOT
relocations with the STT_IFUNC preemtive symbols. No matter which method
is used, both of them should get the resolved ifunc symbols at runtime.
Therefore, linker needs to generate the correct dynamic relocations for
ifunc to make sure the the dynamic linker works well. For now, there are
thirteen relocations are supported for ifunc in GNU ld,
* R_RISCV_CALL and R_RISCV_CALL_PLT:
The RISC-V compiler won't generate R_RISCV_JAL directly to jump to an
ifunc. Besides, we disable the relaxations for the relocation referenced
to ifunc, so just handling the R_RISCV_CALL and R_RISCV_CALL_PLT should be
enough. Linker should generate a .plt entry and a .got.plt entry for it,
and also needs to insert a dynamic IRELATIVE in the .got.plt enrty, or
insert a R_RISCV_JUMP_SLOT when generating shared library.
* R_RISCV_PCREL_HI20 and R_RISCV_PCREL_LO12_I/S:
LA/LLA pattern with local fPIC ifunc symbol, or any non-PIC ifunc symbol.
The PC-relative relocation. The current linker will deal with them in
the same way as R_RISCV_CALL_PLT.
* R_RISCV_GOT_HI20 and R_RISCV_PCREL_LO12_I/S:
LA pattern with global PIC ifunc symbol. Linker should insert a dynamic
IRELATIVE in the .got entry, or insert a R_RISCV_32/64 when generating
shared library.
* R_RISCV_32 and R_RISCV_64:
Store the ifunc symbol into the data section. Linker should insert a
dynamic IRELATIVE in the data section, or insert a R_RISCV_32/64 when
generating shared library.
* R_RISCV_HI20 and R_RISCV_LO12_I/S:
The LUI + ADDI/LW/SW patterns. The absolute access relocation. The
medlow model without the -fPIC compiler option should generate them.
The ld ifunc testsuites "Build pr23169a" and "Build pr23169d" need the
relocations, they are in the ld/testsuite/ld-ifunc/, and need compiler
support.
However, we also made some optimizations with reference to x86,
* If GOT and PLT relocations refer to the same ifunc symbol when generating
pie, then they can actually share a .got entry without creating two entries
to store the same value and relocation.
* If GOT, PLT and DATA relocations refer to the same ifunc symbol when
generating position dependency executable, then linker will fill the address
of .plt entry into the corresponding .got entry and data section, without
insert any dynamic relocations for the GOT and DATA relocations.
For the ifunc testcases, there are three types of them,
1. ifunc-reloc-*: Only check the single type of relocation refers to
ifunc symbol.
* ifunc-reloc-call: R_RISCV_CALL and R_RISCV_CALL_PLT.
* ifunc-reloc-data: R_RISCV_32 and R_RISCV_64.
* ifunc-reloc-got: R_RISCV_GOT_HI20 and R_RISCV_PCREL_LO_I/S.
* ifunc-reloc-pcrel: R_RISCV_PCREL_HI20 and R_RISCV_PCREL_LO_I/S.
2. ifunc-[nonplt|plt]-*: If we don't have PLT relocs, then don't need to
create the PLT and it's .plt entries.
* ifunc-nonplt: Combine R_RISCV_GOT_HI20 and R_RISCV_32/64.
* ifunc-plt: Combine all ifunc relocations.
3. ifunc-seperate-*: If we link the ifunc caller and resolver into the
same module (link the objects), then the results are the same as the
ifunc-reloc-* and ifunc-[noplt|plt]-* testcases. Consider the cases that
the ifunc callers and resolver are in the different modules, that is, we
compile the ifunc resolver to the shared library first, and then link it
with the ifunc callers. The output of ifunc callers should be the same as
the normal STT_FUNC cases, and the shared ifunc resolver should define the
symbols as STT_IFUNC.
The R_RISCV_PCREL_HI20 reloc is special. It should be linked and resolved
locally, so if the ifunc resolver is defined in other modules (other shared
libraries), then the R_RISCV_PCREL_HI20 is unresolvable, and linker should
issue an unresolvable reloc error.
bfd/
* elfnn-riscv.c: Include "objalloc.h" since we need objalloc_alloc.
(riscv_elf_link_hash_table): Add loc_hash_table and loc_hash_memory
for local STT_GNU_IFUNC symbols.
(riscv_elf_got_plt_val): Removed.
(riscv_elf_local_htab_hash, riscv_elf_local_htab_eq): New functions.
Use to compare local hash entries.
(riscv_elf_get_local_sym_hash): New function. Find a hash entry for
local symbol, and create a new one if needed.
(riscv_elf_link_hash_table_free): New function. Destroy an riscv
elf linker hash table.
(riscv_elf_link_hash_table_create): Create hash table for local ifunc.
(riscv_elf_check_relocs): Create a fake global symbol to track the
local ifunc symbol. Add support to check and handle the relocations
reference to ifunc symbols.
(allocate_dynrelocs): Let allocate_ifunc_dynrelocs and
allocate_local_ifunc_dynrelocs to handle the ifunc symbols if they
are defined and referenced in a non-shared object.
(allocate_ifunc_dynrelocs): New function. Allocate space in .plt,
.got and associated reloc sections for ifunc dynamic relocs.
(allocate_local_ifunc_dynrelocs): Likewise, but for local ifunc
dynamic relocs.
(riscv_elf_relocate_section): Add support to handle the relocation
referenced to ifunc symbols.
(riscv_elf_size_dynamic_sections): Updated.
(riscv_elf_adjust_dynamic_symbol): Updated.
(riscv_elf_finish_dynamic_symbol): Finish up the ifunc handling,
including fill the PLT and GOT entries for ifunc symbols.
(riscv_elf_finish_local_dynamic_symbol): New function. Called by
riscv_elf_finish_dynamic_symbol to handle the local ifunc symbols.
(_bfd_riscv_relax_section): Don't do the relaxation for ifunc.
* elfxx-riscv.c: Add R_RISCV_IRELATIVE.
* configure.ac: Link elf-ifunc.lo to use the generic ifunc support.
* configure: Regenerated.
include/
* elf/riscv.h: Add R_RISCV_IRELATIVE to 58.
ld/
* emulparams/elf32lriscv-defs.sh: Add IREL_IN_PLT.
* testsuite/ld-ifunc/ifunc.exp: Enable ifunc tests for RISC-V.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp (run_dump_test_ifunc):
New dump test for ifunc. There are two arguments, 'target` and
`output`. The `target` is rv32 or rv64, and the `output` is used
to choose which output you want to test (exe, pie or .so).
* testsuite/ld-riscv-elf/ifunc-reloc-call-01.s: New testcase.
* testsuite/ld-riscv-elf/ifunc-reloc-call-01.d: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-call-01-exe.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-call-01-pic.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-call-01-pie.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-call-02.s: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-call-02.d: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-call-02-exe.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-call-02-pic.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-call-02-pie.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-data.s: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-data.d: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-data-exe.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-data-pic.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-data-pie.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-got.s: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-got.d: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-got-exe.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-got-pic.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-got-pie.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-pcrel.s: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-pcrel.d: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-pcrel-exe.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-pcrel-pic.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-reloc-pcrel-pie.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-nonplt.s: Likewise.
* testsuite/ld-riscv-elf/ifunc-nonplt.d: Likewise.
* testsuite/ld-riscv-elf/ifunc-nonplt-exe.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-nonplt-pic.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-nonplt-pie.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-plt-01.s: Likewise.
* testsuite/ld-riscv-elf/ifunc-plt-01.d: Likewise.
* testsuite/ld-riscv-elf/ifunc-plt-01-exe.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-plt-01-pic.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-plt-01-pie.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-plt-02.s: Likewise.
* testsuite/ld-riscv-elf/ifunc-plt-02.d: Likewise.
* testsuite/ld-riscv-elf/ifunc-plt-02-exe.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-plt-02-pic.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-plt-02-pie.rd: Likewise.
* testsuite/ld-riscv-elf/ifunc-seperate-resolver.s: Likewise.
* testsuite/ld-riscv-elf/ifunc-seperate-caller.s: Likewise.
* testsuite/ld-riscv-elf/ifunc-seperate-exe.d: Likewise.
* testsuite/ld-riscv-elf/ifunc-seperate-pic.d: Likewise.
* testsuite/ld-riscv-elf/ifunc-seperate-pie.d: Likewise.
* testsuite/ld-riscv-elf/ifunc-seperate-caller-pcrel.s: Likewise.
* testsuite/ld-riscv-elf/ifunc-seperate-pcrel-pic.d: Likewise.
* testsuite/ld-riscv-elf/ifunc-seperate-pcrel-pie.d: Likewise.
Casts should be avoided if at all possible, and in particular the C
standard doesn't promise that function pointers can be cast to void*
or vice-versa. It is only mentioned under J.5 Common extensions,
saying "The following extensions are widely used in many systems, but
are not portable to all implementations."
* elf32-arc.c (replace_func): Correct return type.
(get_replace_function): Use a replace_func function pointer rather
than void*. Update associated ARC_RELOC_HOWTO define.
