ARMv8.2 adds two new instructions: BFC as an alias for BFM and REV64 as
an alias for REV. This patch set adds support for these to binutils,
enabled when the -march=armv8.2-a is given. It depends on the support
for an instruction being its preferred form which was added in an
earlier patch.
This patch adds the alias BFC <Rd>, #<imm>, #<width> as the preferred
form for BFM when the source is a zero register and the conditions for
using the BFI form are met (in other words, BFC is the preferred form
for BFI <Rd>, <Rs>, #<imm>, #<width> when the <Rs> is a zero register).
gas/testsuite/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/alias-2.d: New.
* gas/aarch64/alias-2.s: New.
include/opcode/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_op): Add OP_BFC.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-asm.c (convert_bfc_to_bfm): New.
(convert_to_real): Add case for OP_BFC.
* aarch64-dis-2.c: Regenerate.
* aarch64-dis.c: (convert_bfm_to_bfc): New.
(convert_to_alias): Add case for OP_BFC.
* aarch64-opc-2.c: Regenerate.
* aarch64-opc.c (operand_general_constraint_met_p): Weaken assert
to allow width operand in three-operand instructions.
* aarch64-tbl.h (QL_BF1): New.
(aarch64_feature_v8_2): New.
(ARMV8_2): New.
(aarch64_opcode_table): Add "bfc".
Change-Id: I6efe318b2538ba11f0caece7c6d70957441c872b
ARMv8.2 adds optional support for 16-bit operations to the FP and
Adv.SIMD instructions. This patch adds a feature macro for this support
with a new command line option "+fp16" to enable/disable it.
Although the command line option is added as an architecture extension,
it only affects instructions available with when +fp or +simd is
enabled. If +fp16 is specified then it will also enable +fp.
There are currently no FP16 instructions implemented in binutils, this
patch is to enable subsequent work on supporting the extension.
gas/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "fp16".
* doc/c-aarch64.texi (Architecture Extensions): Add "fp16".
include/opcode/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_F16): New.
(AARCH64_ARCH_V8_2): Add AARCH64_FEATURE_F16 to ARMv8.2
features.
Change-Id: Id2021e0513946e16d0935c2a5b9605574cdff95a
The ARMv8.1 architecture includes the Virtualization Host Extensions
which add a number of system registers. This patch adds support for
these system registers, making them available when -march=armv8.1-a is
selected.
include/opcode/
2015-11-20 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_V8_1): New.
(AARCH64_ARCH_v8_1): Add AARCH64_FEATURE_V8_1.
opcodes/
2015-11-20 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs): Add spsr_el12, elr_el12,
sctlr_el12, cpacr_el12, ttbr1_el2, ttbr0_el12, ttbr1_el12,
tcr_el12, afsr0_el12, afsr1_el12, esr_el12, far_el12, mair_el12,
amair_el12, vbar_el12, contextidr_el2, contextidr_el12,
cntkctl_el12, cntp_tval_el02, cntp_ctl_el02, cntp_cval_el02,
cntv_tval_el02, cntv_ctl_el02, cntv_cval_el02, cnthv_tval_el2,
cnthv_ctl_el2, cnthv_cval_el2.
(aarch64_sys_reg_supported_p): Update for the new system
registers.
gas/testsuite/
2015-11-20 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/virthostext-directive.d: New.
* gas/aarch64/virthostext.d: New.
* gas/aarch64/virthostext.s: New.
Change-Id: Iecb370591b1b6e9e00d81c8ccd9ae3b0f71794a2
ARMv8.2 is an architectural extension of ARMv8. This patch adds an
architecture feature macro for ARMv8.2 to the binutils ARM target
with GAS command line option -march=armv8.2-a.
gas/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (arm_archs): Add "armv8.2-a".
* doc/c-arm.texi (-march): Add "armv8.2-a".
include/opcode/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* arm.h (ARM_EXT2_V8_2A): New.
(ARM_ARCH_V8_2A): New.
Change-Id: I9e0f50e3c6cea24e6b87b8b862fd4e1cdcc1052e
ARMv8.2 is an architectural extension of ARMv8. This patch adds an
architecture feature macro for ARMv8.2 to the binutils AArch64 target
with GAS command line option -march=armv8.2-a.
gas/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_archs): Add "armv8.2-a".
* doc/c-aarch64.texi (-march): Likewise.
include/opcode/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_V8_2): New.
(AARCH64_ARCH_V8_2): New.
Change-Id: I129232ab00234a07d18ce4b619607344acb3cbaf
The cr16 port has a lot of translation/offset logic baked into it, but
it all looks like copy & paste from the d10v port rather than something
the cr16 port wants.
Using the standard gnulib obstack source requires importing quite a
lot of other files from gnulib, and requires build changes.
include/
PR gdb/17133
* obstack.h (__attribute_pure__): Expand _GL_ATTRIBUTE_PURE.
libiberty/
PR gdb/17133
* obstack.c (__alignof__): Expand alignof_type from alignof.h.
(obstack_exit_failure): Don't use exitfail.h.
(_): Include libintl.h when HAVE_LIBINTL_H and nls enabled.
Provide default. Don't include gettext.h.
(_Noreturn): Define.
* obstacks.texi: Adjust node references to external libc info files.
This copies obstack.[ch] from gnulib, and updates the docs. The next
patch should be applied if someone repeats the import at a later date.
include/
PR gdb/17133
* obstack.h: Import current gnulib file.
libiberty/
PR gdb/17133
* obstack.c: Import current gnulib file.
* obstacks.texi: Updated doc, from glibc's manual/memory.texi.
opcode * rx.h (enum RX_Operand_Type): Add RX_Operand_Zero_Indirect.
opcodes * rx-decode.opc (rx_disp): If the displacement is zero, set the
type to RX_Operand_Zero_Indirect.
* rx-decode.c: Regenerate.
* rx-dis (print_insn): Handle RX_Operand_Zero_Indirect.
gas * config/rx-parse.y: Allow zero value for 5-bit displacements.
tests * gas/rx/mov.sm: Add tests for zero offset indirect moves.
* gas/rx/mov.d: Update expected output.
Nowadays aarch64_decode_insn is a public interface used by both
opcodes and gdb. However, its behaviour relies on a global variable
no_aliases, which isn't a good practise. On the other hand, In default,
no_aliases is zero, but in GDB, we do want no alias when decoding
instructions for prologue analysis (patches to be posted), so that we
can handle both instructions "add" and "mov" (an alias of "add") as
"add". The code in GDB can be simplified.
This patch adds a new argument in aarch64_decode_insn, and pass no_aliases
to it. In GDB side, always pass 1 to it.
include/opcode:
2015-10-28 Yao Qi <yao.qi@linaro.org>
* aarch64.h (aarch64_decode_insn): Update declaration.
opcodes:
2015-10-28 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c (aarch64_decode_insn): Add one argument
noaliases_p. Update comments. Pass noaliases_p rather than
no_aliases to aarch64_opcode_decode.
(print_insn_aarch64_word): Pass no_aliases to
aarch64_decode_insn.
gdb:
2015-10-28 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_software_single_step): Pass 1 to
aarch64_decode_insn.
binutils * binutils.c (process_netbsd_elf_note): New function.
(process_note): Call the new function for NetBSD core notes.
include * common.h (NT_NETBSD_MARCH): Define.
This patch adds support for the R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX relocations proposed in
https://groups.google.com/forum/#!topic/x86-64-abi/n9AWHogmVY0
to gas and ld. It updates gas to generate R_X86_64_GOTPCRELX,
R_X86_64_REX_GOTPCRELX if there is a REX prefix, relocation for memory
operand, foo@GOTPCREL(%rip). With the locally defined symbol, foo, we
convert
mov foo@GOTPCREL(%rip), %reg
to
lea foo(%rip), %reg
and convert
call/jmp *foo@GOTPCREL(%rip)
to
nop call foo/jmp foo nop
When PIC is false, convert
test %reg, foo@GOTPCREL(%rip)
to
test $foo, %reg
and convert
binop foo@GOTPCREL(%rip), %reg
to
binop $foo, %reg
where binop is one of adc, add, and, cmp, or, sbb, sub, xor instructions.
bfd/
* elf64-x86-64.c: Include opcode/i386.h.
(x86_64_elf_howto_table): Add R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX.
(R_X86_64_standard): Replace R_X86_64_PLT32_BND with
R_X86_64_REX_GOTPCRELX.
(x86_64_reloc_map): Add BFD_RELOC_X86_64_GOTPCRELX and
BFD_RELOC_X86_64_REX_GOTPCRELX.
(need_convert_mov_to_lea): Renamed to ...
(need_convert_load): This.
(elf_x86_64_check_relocs): Handle R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX. Replace need_convert_mov_to_lea with
need_convert_load.
(elf_x86_64_gc_sweep_hook): Handle R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX.
(elf_x86_64_size_dynamic_sections): Likewise.
(elf_x86_64_relocate_section): Likewise.
(elf_x86_64_convert_mov_to_lea): Renamed to ...
(elf_x86_64_convert_load): This. Replace need_convert_mov_to_lea
with need_convert_load. Support R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX transformations.
* reloc.c (BFD_RELOC_X86_64_GOTPCRELX): New.
(BFD_RELOC_X86_64_REX_GOTPCRELX): Likewise.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
gas/
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_X86_64_GOTPCRELX and BFD_RELOC_X86_64_REX_GOTPCRELX.
(tc_gen_reloc): Likewise.
(i386_validate_fix): Generate BFD_RELOC_X86_64_GOTPCRELX or
BFD_RELOC_X86_64_REX_GOTPCRELX if fx_tcbit2 is set.
* config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Also return
true for BFD_RELOC_X86_64_GOTPCRELX and
BFD_RELOC_X86_64_REX_GOTPCRELX.
gas/testsuite/
* gas/i386/i386.exp: Run x86-64-gotpcrel.
* gas/i386/x86-64-gotpcrel.d: New file.
* gas/i386/x86-64-gotpcrel.s: Likewise.
* gas/i386/ilp32/x86-64-gotpcrel.d: Likewise.
* gas/i386/x86-64-localpic.d: Replace R_X86_64_GOTPCREL with
R_X86_64_REX_GOTPCRELX.
* gas/i386/ilp32/x86-64-localpic.d: Likewise.
include/elf/
* x86-64.h (R_X86_64_GOTPCRELX): New.
(R_X86_64_REX_GOTPCRELX): Likewise.
ld/testsuite/
* ld-ifunc/ifunc-5r-local-x86-64.d: Replace R_X86_64_GOTPCREL
with R_X86_64_REX_GOTPCRELX.
* ld-x86-64/plt-main1.rd: Likewise.
* ld-x86-64/plt-main3.rd: Likewise.
* ld-x86-64/plt-main4.rd: Likewise.
* ld-x86-64/gotpcrel1.dd: New file.
* ld-x86-64/gotpcrel1.out: Likewise.
* ld-x86-64/gotpcrel1a.S: Likewise.
* ld-x86-64/gotpcrel1b.c: Likewise.
* ld-x86-64/gotpcrel1c.c: Likewise.
* ld-x86-64/gotpcrel1d.S: Likewise.
* ld-x86-64/load1.s: Likewise.
* ld-x86-64/load1a.d: Likewise.
* ld-x86-64/load1b.d: Likewise.
* ld-x86-64/load1c.d: Likewise.
* ld-x86-64/load1d.d: Likewise.
* ld-x86-64/x86-64.exp: Run load1a, load1b, load1c and load1d
tests. Run gotpcrel1 test.
This patch adds support for the R_386_GOT32X relocation proposed in
https://groups.google.com/forum/#!topic/ia32-abi/GbJJskkid4I
to gas and ld. It updates gas to generate R_386_GOT32X relocation for
memory operand, foo@GOT[(%reg)]. We must encode "mov foo@GOT, %eax"
with the 0x8b opcode, instead of the 0xb8 opcode, so that it can be
transformed to "lea foo, %eax". With the locally defined symbol, foo,
we convert
mov foo@GOT[(%reg1)], %reg2
to
lea foo[@GOTOFF(%reg1)], %reg2
and convert
call/jmp *foo@GOT[(%reg)]
to
nop call foo/jmp foo nop
When PIC is false, convert
test %reg1, foo@GOT[(%reg2)]
to
test $foo, %reg1
and convert
binop foo@GOT[(%reg1)], %reg2
to
binop $foo, %reg2
where binop is one of adc, add, and, cmp, or, sbb, sub, xor instructions.
bfd/
* elf32-i386.c: Include opcode/i386.h.
(elf_howto_table): Add R_386_GOT32X.
(R_386_ext2): Replace R_386_IRELATIVE with R_386_GOT32X.
(elf_i386_reloc_type_lookup): Handle BFD_RELOC_386_GOT32X.
(need_convert_mov_to_lea): Renamed to ...
(need_convert_load): This.
(elf_i386_check_relocs): Handle R_386_GOT32X. Replace
need_convert_mov_to_lea with need_convert_load.
(elf_i386_gc_sweep_hook): Handle R_386_GOT32X.
(elf_i386_size_dynamic_sections): Likewise.
(elf_i386_relocate_section): Likewise.
(elf_i386_convert_mov_to_lea): Renamed to ...
(elf_i386_convert_load): This. Replace need_convert_mov_to_lea
with need_convert_load. Support R_386_GOT32X transformations.
* reloc.c (BFD_RELOC_386_GOT32X): New.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
gas/
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_386_GOT32X.
(tc_gen_reloc): Likewise.
(match_template): Force 0x8b encoding for "mov foo@GOT, %eax".
(output_disp): Check for "call/jmp *mem", "mov mem, %reg",
"test %reg, mem" and "binop mem, %reg" where binop is one of
adc, add, and, cmp, or, sbb, sub, xor instructions. Set
fx_tcbit if the REX prefix is generated. Set fx_tcbit2 if
BFD_RELOC_386_GOT32X should be generated.
(i386_validate_fix): Generate BFD_RELOC_386_GOT32X if fx_tcbit2
is set.
gas/testsuite/
* gas/i386/got.d: New file.
* gas/i386/got.s: Likewise.
* gas/i386/i386.exp: Run got.
* gas/i386/localpic.d: Replace R_386_GOT32 with R_386_GOT32X.
* gas/i386/mixed-mode-reloc32.d: Likewise.
* gas/i386/reloc32.d: Likewise.
include/elf/
* i386.h (R_386_GOT32X): New relocation.
ld/testsuite/
* ld-i386/branch1.d: New file.
* ld-i386/branch1.s: Likewise.
* ld-i386/call1.d: Likewise.
* ld-i386/call1.s: Likewise.
* ld-i386/call2.d: Likewise.
* ld-i386/call2.s: Likewise.
* ld-i386/got1.dd: Likewise.
* ld-i386/got1.out: Likewise.
* ld-i386/got1a.S: Likewise.
* ld-i386/got1b.c: Likewise.
* ld-i386/got1c.c: Likewise.
* ld-i386/got1d.S: Likewise.
* ld-i386/jmp1.d: Likewise.
* ld-i386/jmp1.s: Likewise.
* ld-i386/jmp2.d: Likewise.
* ld-i386/jmp2.s: Likewise.
* ld-i386/load1.d: Likewise.
* ld-i386/load1.s: Likewise.
* ld-i386/load2.d: Likewise.
* ld-i386/load2.s: Likewise.
* ld-i386/load3.d: Likewise.
* ld-i386/load3.s: Likewise.
* ld-i386/load4.s: Likewise.
* ld-i386/load4a.d: Likewise.
* ld-i386/load4b.d: Likewise.
* ld-i386/load5.s: Likewise.
* ld-i386/load5a.d: Likewise.
* ld-i386/load5b.d: Likewise.
* ld-i386/load6.d: Likewise.
* ld-i386/load6.s: Likewise.
* ld-i386/i386.exp: Run branch1, call1, call2, jmp1, jmp2,
load1, load2, load3, load4a, load4b, load5a, load5b and load6
tests. Run got1 test.
'template' is used in include/opcode/aarch64.h as below,
typedef struct
{
const char *template;
uint32_t value;
int has_xt;
} aarch64_sys_ins_reg;
and it triggers compilation errors when GDB is built in C++ mode.
In file included from git/gdb/aarch64-tdep.c:62:0:
git/gdb/../include/opcode/aarch64.h:651:15: error: expected unqualified-id before 'template'
const char *template;
This patch is to rename field template to name.
gas/
* config/tc-aarch64.c (md_begin): Access field 'name' rather
than 'template'.
include/opcode/
* aarch64.h (aarch64_sys_ins_reg) <template>: Removed.
<name>: New field.
opcodes/
* aarch64-dis.c (aarch64_ext_sysins_op): Access field
'name' rather than 'template'.
* aarch64-opc.c (aarch64_print_operand): Likewise.
This is sufficient to link an aarch64 GDB built in C++ mode. Pedro
did something similar in Feb
https://sourceware.org/ml/binutils/2015-02/msg00176.html
include/opcode/
2015-10-07 Yao Qi <yao.qi@linaro.org>
* aarch64.h [__cplusplus]: Wrap in extern "C".
We want to use disas_aarch64_insn inside GDB to decode instructions, so
this patch exposes it and rename it to aarch64_decode_insn to follow
the conventions of other interfaces.
include/opcode:
2015-10-02 Yao Qi <yao.qi@linaro.org>
* aarch64.h (aarch64_decode_insn): Declare it.
opcodes:
2015-10-02 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c (disas_aarch64_insn): Remove static. Change
argument insn type to aarch64_insn. Rename to ...
(aarch64_decode_insn): ... it.
(print_insn_aarch64_word): Caller updated.
gas * doc/c-s390.texi: Add documentation.
Add missing code markup.
* config/tc-s390.c (current_flags): New static variable.
(s390_parse_cpu): Parse cpu flags a la "+nohtm" etc.
(s390_setup_opcodes): Use cpu flags to determine the set of opcodes.
Fix indentation.
(md_parse_option): Call s390_parse_cpu with the new signature.
(s390_machine): Likewise.
Keep track of current_flags.
Simplify code a bit.
undefine MAX_HISTORY at end of function.
(s390_machinemode): undefine MAX_HISTORY at end of function.
Update an error message.
tests * gas/s390/s390.exp: Add new tests.
* gas/s390/machine-parsing-1.s: New test file.
* gas/s390/machine-parsing-1.l: Likewise.
* gas/s390/machine-parsing-2.s: Likewise.
* gas/s390/machine-parsing-2.l: Likewise.
* gas/s390/machine-parsing-3.s: Likewise.
* gas/s390/machine-parsing-3.l: Likewise.
* gas/s390/machine-parsing-4.s: Likewise.
* gas/s390/machine-parsing-4.l: Likewise.
* gas/s390/machine-parsing-5.s: Likewise.
* gas/s390/machine-parsing-5.l: Likewise.
* gas/s390/machine-parsing-6.s: Likewise.
* gas/s390/machine-parsing-6.l: Likewise.
opcode * s390.h (S390_INSTR_FLAG_HTM): New flag.
(S390_INSTR_FLAG_VX): New flag.
(S390_INSTR_FLAG_FACILITY_MASK): New flag mask.
opcodes * s390-mkopc.c (main): Parse htm and vx flag.
* s390-opc.txt: Mark instructions from the hardware transactional
memory and vector facilities with the "htm"/"vx" flag.
Other places (e.g. the gdb stack unwinder) can use these instead of
hard-coded patterns.
[include/Changelog]
2015-09-26 James Bowman <james.bowman@ftdichip.com>
* opcode/ft32.h: Add instruction macros FT32_*()
The ch_type field in Elf64_External_Chdr is 4 bytes, followed by a
4-byte padding. This change doesn't introduce any functional change
since only the lower 32 bits of the ch_type field are used.
* external.h (Elf64_External_Chdr): Change ch_type to 4 bytes
and add ch_reserved.
When generating relocation (tc_gen_reloc) 32 bit relocation fixup
is changed to new 32 bit PC relative relocation if the fixup has pc-relative
flag set.
bfd/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* elf32-avr.c: Add 32 bit PC relative relocation for AVR target.
gas/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* config/tc-avr.c (tc_gen_reloc): Change 32 bit relocation to
32 bit PC relative and update offset if the fixup is pc-relative.
* config/tc-avr.h (DIFF_EXPR_OK): Define to enable PC relative diff
relocs.
gas/testsuite/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* gas/avr/pc-relative-reloc.d: New test for 32 bit pc relative reloc.
* gas/avr/per-function-debugline.s: New test source.
include/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* elf/avr.h: Add new 32 bit PC relative relocation.
ld/testsuite/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* ld-avr/gc-section-debugline.d: New test.
* ld-avr/per-function-debugline.s: Source for new test.
Back in the day support for these processors was added, we probably
didn't want to waste PPC_OPCODE bits on minor variations. I've had a
complaint that disassembly of mfspr/mtspr was wrong for power8. This
patch fixes that problem.
Note that since -m860/-m850/-m821 are new gas options enabling the
mpc8xx specific mfspr/mtspr variants it is possible that this change
will break some mpc8xx assembly code. ie. you might need to modify
makefiles to pass -m860 to gas.
include/opcode/
* ppc.h (PPC_OPCODE_750, PPC_OPCODE_7450, PPC_OPCODE_860): Define.
opcodes/
* ppc-opc.c (PPC750, PPC7450, PPC860): Define using PPC_OPCODE_*.
* ppc-dis.c (ppc_opts): Add 821, 850 and 860 entries. Add
PPC_OPCODE_7450 to 7450 entry. Add PPC_OPCODE_750 to 750cl entry.
gas/
* config/tc-ppc.c (md_show_usage): Add -m821, -m850, -m860.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
gas/testsuite/
* gas/ppc/titan.d: Correct mfmcsrr0 disassembly.
include * dis-asm.h (struct disassemble_info): Add stop_vma field.
binuti * objdump.c (disassemble_bytes): Set the stop_vma field in the
disassemble_info structure when disassembling code sections with
-d.
* doc/binutils.texi (objdump): Document the discrepancy between -d
and -D.
opcodes * dis-buf.c (buffer_read_memory): Fail is stop_vma is set and the
requested region lies beyond it.
* bfin-dis.c (print_insn_bfin): Ignore sysop instructions when
looking for 32-bit insns.
* mcore-dis.c (print_insn_mcore): Disable stop_vma when reading
data.
* sh-dis.c (print_insn_sh): Likewise.
* tic6x-dis.c (print_insn_tic6x): Disable stop_vma when reading
blocks of instructions.
* vax-dis.c (print_insn_vax): Check that the requested address
does not clash with the stop_vma.
tests * gas/arm/backslash-at.s: Add extra .byte directives so that the
foo symbol does not appear to point half way through an
instruction.
* gas/arm/backslash-at.d: Update expected disassembly.
* gas/i386/ilp32/x86-64-opcode-inval-intel.d: Likewise.
* gas/i386/ilp32/x86-64-opcode-inval.d: Likewise.
* gas/i386/x86-64-opcode-inval-intel.d: Likewise.
* gas/i386/x86-64-opcode-inval.d: Likewise.
ISA 2.07 (ie, POWER8) added the rfebb instruction which takes one operand
with the value of either a 0 or 1. It also defines an extended mnemonic
with no operands (ie, "rfebb") that is supposed to be equivalent to "rfebb 1".
I implemented rfebb's lone operand with PPC_OPERAND_OPTIONAL, but the
problem is, optional operands that are ommitted always default to the
value 0, which is wrong in this case. I have added support for allowing
non-zero default values by adding an additional flag PPC_OPERAND_OPTIONAL_VALUE
that specifies that the default operand value to be used is stored in the
SHIFT field of the operand field immediately following this one.
This fixes the rfebb issue. I also fixed the mftb and mfcr instructions
so they use the same mechanism. This allows us to flag invalid uses of
mfcr where we explicitly pass in a zero FXM value, like the use in a2.[sd].
include/opcode/
* ppc.h (PPC_OPERAND_OPTIONAL_VALUE): New.
(ppc_optional_operand_value): New inline function.
opcodes/
* ppc-dis.h (skip_optional_operands): Use ppc_optional_operand_value.
* ppc-opc.c (FXM4): Add non-zero optional value.
(TBR): Likewise.
(SXL): Likewise.
(insert_fxm): Handle new default operand value.
(extract_fxm): Likewise.
(insert_tbr): Likewise.
(extract_tbr): Likewise.
gas/
* config/tc-ppc.c (md_assemble): Use ppc_optional_operand_value.
Allow for optional operands without insert functions.
gas/testsuite/
* gas/ppc/power8.d: Fixup rfebb test results.
* gas/ppc/a2.s: Fix invalid mfcr test.
* gas/ppc/a2.d: Likewise.
When tracing, we often want to display the human readable name for the
various syscall/errno values. Rather than make each target duplicate
the lookup, extend the existing maps to include the string directly,
and add helper functions to look up the constants.
While most targets are autogenerated (from libgloss), the bfin/cris
targets have custom maps for the Linux ABI which need to be updated
by hand.
The ARMv8.1 architecture introduced the Privileged Access Never extension. This
adds a processor state field PSTATE.PAN which can be accessed using the MRS/MSR
instructions.
This patch adds support for the PAN architecture feature and processor state
field to libopcode.
include/opcode
2015-06-01 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_PAN): New.
(aarch64_sys_reg_supported_p): Declare.
(aarch64_pstatefield_supported_p): Declare.
opcodes/
2015-06-01 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (F_ARCHEXT): New.
(aarch64_sys_regs): Add "pan".
(aarch64_sys_reg_supported_p): New.
(aarch64_pstatefields): Add "pan".
(aarch64_pstatefield_supported_p): New.
Merge with gcc:
2014-11-11 Anthony Brandon <anthony.brandon@gmail.com>
Manuel López-Ibáñez <manu@gcc.gnu.org>
PR driver/36312
* filenames.h: Add prototype for canonical_filename_eq.
Taking them out showed a bug in the powerpc64 backend with .branch_lt
being removed from output_bfd but not from previously set up segment
section maps. Removing the bfd sections meant their sh_flags (and
practically everything else) remaining zero, ie. not SHF_ALLOC,
triggering complaints about "`.branch_lt' can't be allocated in
segment".
include/elf/
* internal.h (ELF_SECTION_IN_SEGMENT_1): Ensure PT_LOAD and
similar segments only contain alloc sections.
ld/
* emultempl/ppc64elf.em (gld${EMULATION_NAME}_after_allocation):
Call gld${EMULATION_NAME}_map_segments regardless of need_laying_out.
ld/testsuite/
* ld-powerpc/tocnovar.d: Revert last change.
Bits in section flags should only be defined in bfd/section.c. This
patch moves SEC_MEP_VLIW to bfd/section.c.
bfd/
PR binutils/18316
* section.c (SEC_MEP_VLIW): New.
* bfd-in2.h: Regenerated.
include/elf/
PR binutils/18316
* mep.h (SEC_MEP_VLIW): Removed.
This patch adds --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi]
to ld for ELF targets to support generating compressed DWARF debug
sections. We always generate .zdebug_* section since section names have
been finalized and they can't be changed easily when compression is
being performed.
bfd/
* bfd-in.h (compressed_debug_section_type): New.
* compress.c (bfd_compress_section_contents): Add an argument
for linker write compression and always generate .zdebug_*
section when linking.
(bfd_init_section_compress_status): Pass FALSE to
bfd_compress_section_contents.
(bfd_compress_section): New function.
* elf.c (elf_fake_sections): For linking, set SEC_ELF_COMPRESS
on DWARF debug sections if COMPRESS_DEBUG is set and rename
section if COMPRESS_DEBUG_GABI_ZLIB isn't set.
(assign_file_positions_for_non_load_sections): Set sh_offset
to -1 if SEC_ELF_COMPRESS is set.
(assign_file_positions_except_relocs): Likwise.
(_bfd_elf_assign_file_positions_for_relocs): Renamed to ...
(_bfd_elf_assign_file_positions_for_non_load): This. Change
return time to bfd_boolean. Compress the section if
SEC_ELF_COMPRESS is set.
(_bfd_elf_write_object_contents): Updated.
(_bfd_elf_set_section_contents): Write section contents to
the buffer if SEC_ELF_COMPRESS is set.
* merge.c: Include "elf-bfd.h".
(sec_merge_emit): Add arguments for contents and offset. Write
to contents with offset if contents isn't NULL.
(_bfd_write_merged_section): Write section contents to the
buffer if SEC_ELF_COMPRESS is set. Pass contents and
output_offset to sec_merge_emit.
* elflink.c (bfd_elf_final_link): Allocate the buffer for
output section contents if SEC_ELF_COMPRESS is set.
* section.c (SEC_ELF_COMPRESS): New.
* bfd-in2.h: Regenerated.
gas/
* as.h (compressed_debug_section_type): Removed.
include/
* bfdlink.h (bfd_link_info): Add compress_debug.
ld/
* ld.texinfo: Document --compress-debug-sections=.
* ldmain.c (main): Set BFD_COMPRESS on output_bfd if
COMPRESS_DEBUG is set. Set BFD_COMPRESS_GABI on output_bfd
for COMPRESS_DEBUG_GABI_ZLIB.
* lexsup.c (elf_static_list_options): Add
--compress-debug-sections=.
* emultempl/elf32.em (OPTION_COMPRESS_DEBUG): New.
(xtra_long): Add "compress-debug-sections".
(gld${EMULATION_NAME}_handle_option): Handle
OPTION_COMPRESS_DEBUG.
ld/testsuite/
* ld-elf/compress.exp (build_tests): Add tests for
--compress-debug-sections=.
(run_tests): Likewise.
Add additonal tests for --compress-debug-sections=.
* ld-elf/gabiend.rt: New file.
* ld-elf/gabinormal.rt: Likewise.
* ld-elf/gnubegin.rS: Likewise.
* ld-elf/gnunormal.rS: Likewise.
* ld-elf/zlibbegin.rS: Likewise.
* ld-elf/zlibnormal.rS: Likewise.
Address of protected data defined in the shared library may be external,
i.e., due to copy relocation. By default, linker backend checks if
relocations against protected data symbols are valid for building shared
library and issues an error if relocation isn't allowed. The new option
override linker backend default. When -z noextern-protected-data is used,
updates on protected data symbols by another module won't be visibile
to the resulting shared library. This option is specific to ELF/i386
and ELF/x86-64.
bfd/
PR ld/pr17709
* elflink.c (_bfd_elf_adjust_dynamic_copy): Check
info->extern_protected_data when warning copy relocs against
protected symbols.
(_bfd_elf_symbol_refs_local_p): Check info->extern_protected_data
when checking protected non-function symbols.
include/
PR ld/pr17709
* bfdlink.h (bfd_link_info): Add extern_protected_data.
ld/
PR ld/pr17709
* ld.texinfo: Document "-z noextern-protected-data".
* ldmain.c (main): Initialize link_info.extern_protected_data
to -1.
* lexsup.c (elf_shlib_list_options): Add
"-z [no]extern-protected-data".
* emulparams/elf32_x86_64.sh: Source extern_protected_data.sh.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_i386_be.sh: Likewise.
* emulparams/elf_i386_chaos.sh: Likewise.
* emulparams/elf_i386_ldso.sh: Likewise.
* emulparams/elf_i386_vxworks.sh: Likewise.
* emulparams/elf_k1om.sh: Likewise.
* emulparams/elf_l1om.sh: Likewise.
* emulparams/elf_x86_64.sh: Source extern_protected_data.sh.
(PARSE_AND_LIST_OPTIONS): Renamed to ...
(PARSE_AND_LIST_OPTIONS_BNDPLT): This.
(PARSE_AND_LIST_ARGS_CASE_Z): Renamed to ...
(PARSE_AND_LIST_ARGS_CASE_Z_BNDPLT): This.
(PARSE_AND_LIST_OPTIONS): Append $PARSE_AND_LIST_OPTIONS_BNDPLT.
(PARSE_AND_LIST_ARGS_CASE_Z): Append
$PARSE_AND_LIST_ARGS_CASE_Z_BNDPLT.
* emulparams/extern_protected_data.sh: New file.
ld/testsuite/
PR ld/pr17709
* ld-i386/i386.exp: Run protected6b.
* ld-i386/protected6b.d: New file.
* ld-x86-64/protected6b.d: Likewise.
* ld-x86-64/x86-64.exp: Run protected6b.
bfd * elf32-rx.c (describe_flags): Report the settings of the string
insn using bits.
(rx_elf_merge_private_bfd_data): Handle merging of the string insn
using bits.
bin * readelf.c (get_machine_flags): Report the setting of the string
insn using bits.
gas * config/tc-rx.c (enum options): Add OPTION_DISALLOW_STRING_INSNS.
(md_longopts): Add -mno-allow-string-insns.
(md_parse_option): Handle -mno-allow-string-insns.
(md_show_usage): Mention -mno-allow-string-insns.
(rx_note_string_insn_use): New function. Produces an error
message if a string insn is used when it is not allowed.
* config/rx-parse.y (SCMPU): Call rx_note_string_insn_use.
(SMOVU, SMOVB, SMOVF, SUNTIL, SWHILE, RMPA): Likewise.
* config/rx-defs.h (rx_note_string_insn_use): Prototype.
* doc/c-rx.texi: Document -mno-allow-string-insns.
elf * rx.h (E_FLAG_RX_SINSNS_SET): New bit in e_flags field.
(E_FLAG_RX_SINSNS_YES): Likewise.
(E_FLAG_RX_SINSNS_MASK): New define.
inc * rl78.h (E_FLAG_RL78_G10): Redefine.
(E_FLAG_RL78_CPU_MASK, E_FLAG_RL78_ANY_CPU, E_FLAG_RL78_G13
E_FLAG_RL78_G14): New flags.
bin * readelf.c (get_machine_flags): Decode RL78's G13 and G14 flags.
gas * config/tc-rl78.c (enum options): Add G13 and G14.
(md_longopts): Add -mg13 and -mg14.
(md_parse_option): Handle -mg13 and -mg14.
(md_show_usage): List -mg13 and -mg14.
* doc/c-rl78.texi: Add description of -mg13 and -mg14 options.
bfd * elf32-rl78.c (rl78_cpu_name): New function. Prints the name of
the RL78 core based upon the flags.
(rl78_elf_merge_private_bfd_data): Handle merging of G13 and G14
flags.
(rl78_elf_print_private_bfd_data): Use rl78_cpu_name.
(elf32_rl78_machine): Always return bfd_mach_rl78.
Pull out the duplicated dv_sockser_install prototype from the tconfig.in
files and put it in the one place it gets used -- sim-module.c. This is
still arguably incorrect, but it's better than the status quo where the
tconfig.in has to include header files and duplicate the dv-sockser func.
The tconfig header is meant to be simple and contain a target defines.
bfd * elf32-v850.c (v850_set_note): New function. Creates a Renesas
style note entry.
(v850_elf_make_note_section): New function. Creates a note
section.
(v850_elf_create_sections): New function. Create a note section
if one is not already present.
(v850_elf_set_note): New function. Adds a note to a bfd.
(v850_elf_copy_private_bfd_data): New function. Copies V850
notes.
(v850_elf_merge_notes): New function. Merges V850 notes.
(print_v850_note): New function. Displays a V850 note.
(v850_elf_print_notes): New function. Displays all notes attached
to a bfd.
(v850_elf_merge_private_bfd_data): Call v850_elf_merge_notes.
(v850_elf_print_private_bfd_data): Call v850_elf_print_notes.
(v850_elf_fake_sections): Set the type of the V850 note section.
* bfd-in.h (v850_elf_create_sections): Add prototype.
(v850_elf_set_note): Add prototype.
* bfd-in2.h: Regenerate.
binutils* readelf.c (get_machine_flags): Remove deprecated V850 machine
flags.
(get_v850_section_type_name): New function. Handles V850 special
sections.
(get_section_type_name): Add support for V850.
(get_v850_elf_note_type): New function. Returns the name of a
V850 note.
(print_v850_note): New function. Prints a V850 note.
(process_v850_notes): New function. Prints V850 notes.
(process_note_sections): Add support for V850.
binutils/testsute
* binutils-all/objcopy.exp: Skip the strip-10 test for the V850.
gas * config/tc-v850.c (soft_float): New variable.
(v850_data_8): New variable.
(md_show_usage): Add -msoft-float/-mhard-float.
(md_parse_option): Likewise.
(md_begin): Set the default value of soft_float.
(v850_md_end): New function. Creates a note section.
* config/tc-v850.h (md_end): Define.
* doc/c-v850.texi: Document -msoft-float/-mhard-float.
gas/testsuite
* gas/elf/elf.exp: Add special version of the section2 test for
the V850.
* gas/elf/section2.e-v850: New file.
include/elf
* v850.h (EF_RH850_SIMD): Delete deprecated flag.
(EF_RH850_CACHE): Likewise.
(EF_RH850_MMU): Likewise.
(EF_RH850_DATA_ALIGN8): Likewise.
(SHT_RENESAS_IOP): Fix typo in name.
(SHT_RENESAS_INFO): Define.
(V850_NOTE_SECNAME): Define.
(SIZEOF_V850_NOTE): Define.
(V850_NOTE_NAME): Define.
(enum v850_notes): New enum.
(NUM_V850_NOTES): Define.
ld/ChangeLog
2015-02-24 Nick Clifton <nickc@redhat.com>
* Makefile.am (ev850.c): Add dependency upon
$(srcdir)/emultempl/v850elf.em.
(ev850_rh850.c): Likewise.
* Makefile.in: Regenerate.
* emultempl/v850elf.em: New file.
* emulparams/v850.sh (EXTRA_EM_FILE): Define.
* emulparams/v850_rh850.sh (EXTRA_EM_FILE): Define.
* scripttempl/v850.sc: Add .note.renesas section.
* scripttempl/v850_rh850.sc: Likewise.
ld/testsuite
* ld-elf/extract-symbol-1sec.d: Expect to fail on the V850.
The IBM z13 has new 128-bit wide vector registers v0-v31, where v0-v15
include the existing 64-bit wide floating point registers. The Linux
kernel presents the vector registers as two additional register sets,
one for the right halves of v0-v15 and another one for the full
registers v16-v31. Thus a new core file may contain two new register
note sections, and this patch adds support to binutils for them.
bfd/
* elf-bfd.h (elfcore_write_s390_vxrs_low): Add prototype.
(elfcore_write_s390_vxrs_high): Likewise.
* elf.c (elfcore_grok_s390_vxrs_low): New function.
(elfcore_grok_s390_vxrs_high): New function.
(elfcore_grok_note): Call them.
(elfcore_write_s390_vxrs_low): New function.
(elfcore_write_s390_vxrs_high): New function.
(elfcore_write_register_note): Call them.
binutils/
* readelf.c (get_note_type): Add NT_S390_VXRS_LOW and
NT_S390_VXRS_HIGH.
include/elf/
* common.h (NT_S390_VXRS_LOW): New macro.
(NT_S390_VXRS_HIGH): Likewise.
These are sufficient to link an --enable-targets=all GDB build in C++
mode, on x86_64 Fedora 20.
include/opcode/
2015-02-19 Pedro Alves <palves@redhat.com>
* cgen.h [__cplusplus]: Wrap in extern "C".
* msp430-decode.h [__cplusplus]: Likewise.
* nios2.h [__cplusplus]: Likewise.
* rl78.h [__cplusplus]: Likewise.
* rx.h [__cplusplus]: Likewise.
* tilegx.h [__cplusplus]: Likewise.
opcodes/
2015-02-19 Pedro Alves <palves@redhat.com>
* microblaze-dis.h [__cplusplus]: Wrap in extern "C".
Just like libiberty.h. So that C++ programs, such as GDB when built
as a C++ program, can use it.
include/ChangeLog:
2015-02-19 Pedro Alves <palves@redhat.com>
* floatformat.h [__cplusplus]: Wrap in extern "C".
LTO output objects have an STT_FILE symbol using the name of the file,
a temporary file. This results in executables that can't be exactly
reproduced, so the file name needs to be dropped. We don't want to
lose all file symbols when linking a mix of lto and non-lto objects as
a file symbol can be used to figure which source file generated a
given local symbol. So lto output objects need to be marked.
I chose to mark lto output objects with a new bfd flag. This flag is
also used to fix a bug in the link-once handling; An object being
loaded after "loading_lto_outputs" is set might be one extracted from
an archive to satisfy new references from lto objects, not an lto
object itself.
The new flag is copied from archive to elements, and the same done
for no_export. This fixes a bug in that --exclude-libs doesn't work
with thin archives. I'm not completely happy with this part of the
patch and may revist this to avoid the hack in
_bfd_look_for_bfd_in_cache.
PR ld/17973
include/
* bfdlink.h (struct bfd_link_info): Delete loading_lto_outputs.
bfd/
* bfd.c (struct bfd): Add lto_output.
* linker.c (_bfd_handle_already_linked): Explicitly test for
objects added by the lto plugin.
* opncls.c (_bfd_new_bfd_contained_in): Copy lto_output and
no_export flags from archive.
* archive.c (open_nested_file): New function, setting lto_output
and no_export, extracted from..
(find_nested_archive): ..here. Flip params. Rename from
_bfd_find_nested_archive.
(_bfd_get_elt_at_filepos): Correct var typo. Use open_nested_file.
(_bfd_look_for_bfd_in_cache): Copy no_export.
* elflink.c (elf_link_add_object_symbols): Remove now unnecessary
my_archive->no_export test.
(elf_link_input_bfd): Drop existing lto_output STT_FILE syms.
Don't use the file name when adding lto_output STT_FILE sym.
* bfd-in2.h: Regenerate.
ld/
* ldlang.h (struct lang_input_statement_flags): Add lto_output.
* ldlang.c (lang_process): Don't set loading_lto_outputs.
* ldfile.c (ldfile_try_open_bfd): Transfer entry flags.lto_output
to bfd.
* plugin.c (add_input_file, add_input_library): Set flags.lto_output.
DWARFv5 defines and GCC5 may output two new DW_LANG constants for the
Fortran 2003 and Fortran 2008 standards. Handle and display both in
binutils.
binutils/ChangeLog:
* dwarf.c (read_and_display_attr_value): Handle DW_LANG_Fortran03
and DW_LANG_Fortran08.
include/ChangeLog:
* dwarf2.h: Add DW_LANG_Fortran03 and DW_LANG_Fortran08.
http://dwarfstd.org/ShowIssue.php?issue=141121.1
Add a flag field is_noreturn to struct func_type. Make calling_convention
a small bit field to not increase the size of the struct. Set is_noreturn
if the new GCC5/DWARF5 DW_AT_noreturn is set on a DW_TAG_subprogram.
Use this information to warn the user before doing a finish or return from
a function that does not return normally to its caller.
(gdb) finish
warning: Function endless does not return normally.
Try to finish anyway? (y or n)
(gdb) return
warning: Function does not return normally to caller.
Make endless return now? (y or n)
gdb/ChangeLog
* dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
DW_AT_noreturn.
* gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
calling_convention an 8 bit bit field.
(TYPE_NO_RETURN): New macro.
* infcmd.c (finish_command): Query if function does not return
normally.
* stack.c (return_command): Likewise.
gdb/testsuite/ChangeLog
* gdb.base/noreturn-return.c: New file.
* gdb.base/noreturn-return.exp: New file.
* gdb.base/noreturn-finish.c: New file.
* gdb.base/noreturn-finish.exp: New file.
include/ChangeLog
* dwarf2.def (DW_AT_noreturn): New DWARF5 attribute.
The dwarf2.h addition and the code to emit the new attribute is already in
the gcc tree.
- 32 128 bit vector registers (overlapping with the existing 16 64 bit
floating point registers)
- vector double instructions
- vector integer instructions
- scalar vector instructions (allowing to have more floating point
registers for scalar operations)
- vector string instructions
gas/ChangeLog:
* config/tc-s390.c (struct pd_reg): Remove.
(pre_defined_registers): Remove.
(REG_NAME_CNT): Remove.
(reg_name_search): Calculate the register number instead of doing
a lookup.
(register_name, tc_s390_regname_to_dw2regnum): Adopt to the new
reg_name_search signature.
(s390_parse_cpu): Support the new arch string z13.
(s390_insert_operand): Support for vector registers with the extra
field for the fifth bit of each vector register operand.
(md_gather_operand): Adjust to the new handling of optional
parameters.
* doc/as.texinfo: Document the z13 cpu string.
gas/testsuite/ChangeLog:
* gas/s390/esa-g5.d: Add a variant without the optional operand.
* gas/s390/esa-g5.s: Likewise.
* gas/s390/esa-z9-109.d: Likewise.
* gas/s390/esa-z9-109.s: Likewise.
* gas/s390/zarch-z9-109.d: Likewise.
* gas/s390/zarch-z9-109.s: Likewise.
* gas/s390/zarch-z10.d: For variants with a zero optional argument
it is not dumped by objdump anymore.
* gas/s390/zarch-zEC12.d: Likewise.
* gas/s390/zarch-z13.d: New file.
* gas/s390/zarch-z13.s: New file.
* gas/s390/s390.exp: Run the test for the z13 files.
include/opcode/ChangeLog:
* s390.h (s390_opcode_cpu_val): Add S390_OPCODE_Z13.
ld/testsuite/ChangeLog:
* ld-s390/tlsbin.dd: The nopr register operand is optional and not
printed if 0 anymore.
opcodes/ChangeLog:
* s390-dis.c (s390_extract_operand): Support vector register
operands.
(s390_print_insn_with_opcode): Support new operands types and add
new handling of optional operands.
* s390-mkopc.c (s390_opcode_mode_val, s390_opcode_cpu_val): Remove
and include opcode/s390.h instead.
(struct op_struct): New field `flags'.
(insertOpcode, insertExpandedMnemonic): New parameter `flags'.
(dumpTable): Dump flags.
(main): Parse flags from the s390-opc.txt file. Add z13 as cpu
string.
* s390-opc.c: Add new operands types, instruction formats, and
instruction masks.
(s390_opformats): Add new formats for .insn.
* s390-opc.txt: Add new instructions.
This pulls in some missing prototypes and also adds corresponding entries
to the ChangeLog file. Please note that for one function, strverscmp(),
the ChangeLog entry was already there, but the actual prototype wasn't.
These ChangeLog entries are added:
2014-10-28 Yury Gribov <y.gribov@samsung.com>
* libiberty.h (strtol, strtoul, strtoll, strtoull): New prototypes.
2014-10-15 David Malcolm <dmalcolm@redhat.com>
* libiberty.h (choose_tmpdir): New prototype.
*** bfd/ChangeLog ***
2014-12-25 Thomas Preud'homme <thomas.preudhomme@arm.com>
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Handle new
Tag_ABI_VFP_args value and replace hardcoded values by enum
values.
(elf32_arm_post_process_headers): Set e_flags in ELF header
as hard float only when Tag_ABI_VFP_args is 1, using new enum
value AEABI_VFP_args_vfp to check that.
*** binutils/ChangeLog ***
2014-12-25 Thomas Preud'homme <thomas.preudhomme@arm.com>
* readelf.c (arm_attr_tag_ABI_VFP_args): Add "compatible".
*** gdb/ChangeLog ***
2014-12-25 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-tdep.c (arm_gdbarch_init): Explicitely handle value 3 of
Tag_ABI_VFP_args. Also replace hardcoded values by enum values
in the switch handling the different values of Tag_ABI_VFP_args.
*** gold/ChangeLog ***
2014-12-25 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm.cc (Target_arm::do_adjust_elf_header): Set e_flags in ELF
header as hard float only when Tag_ABI_VFP_args is 1, using new
enum value AEABI_VFP_args_vfp to check that.
(Target_arm::merge_object_attributes): Handle new Tag_ABI_VFP_args
value and replace hardcoded values by enum values.
*** include/elf/ChangeLog ***
2014-12-25 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm.h: New AEABI_FP_number_model_* and AEABI_VFP_args_* enum
values.
*** ld/testsuite/ChangeLog ***
2014-12-25 Thomas Preud'homme <thomas.preudhomme@arm.com>
* ld-arm/attr-merge-2a.s: Add Tag_ABI_VFP_args.
* ld-arm/attr-merge-2b.s: Likewise.
* ld-arm/attr-merge-2.attr: Likewise.
* ld-arm/attr-merge-4a.s: Add Tag_ABI_FP_number_model and
Tag_ABI_VFP_args.
* ld-arm/attr-merge-4b.s: Likewise.
* ld-arm/attr-merge-4.attr: Likewise.
* ld-arm/attr-merge-6a.s: Likewise.
* ld-arm/attr-merge-6b.s: Likewise.
* ld-arm/attr-merge-6.attr: Add Tag_ABI_FP_number_model.
Trying to use the SEC_LINKER_CREATED section flag to determine whether
a symbol is linker defined fails to work on targets like alpha that
define special SEC_COMMON sections. These might contain symbols that
originated in an object file.
include/
* bfdlink.h (struct bfd_link_hash_entry): Comment non_ir_ref. Add
linker_def.
bfd/
* elflink.c (_bfd_elf_define_linkage_sym): Set linker_def.
* linker.c (_bfd_generic_link_add_one_symbol): Clear linker_def
for CDEF, DEF, DEFW, COM.
ld/
* ldexp.c (exp_fold_tree_1 <etree_provide>): Test linker_def.
ld/testsuite/
* ld-powerpc/sdabase.s,
* ld-powerpc/sdabase.t,
* ld-powerpc/sdabase.d: New test.
* ld-powerpc/sdabase2.t,
* ld-powerpc/sdabase2.d: New test.
* ld-powerpc/powerpc.exp: Run them.
The gcc plugin is split into two parts. One part is an ordinary gcc
plugin. The other part is a shared library that is loaded by gdb.
This patch adds some files that define the interface exported by this
shared library to gdb. These files also define the internal API by
which the gdb- and gcc-sides communicate.
These files will be kept in sync between gcc and gdb like much of
include/.
The exported API has been intentionally kept very simple. In
particular only a single function is exported from the gdb-side
library; symbol visibility is used to hide everything else. This
exported symbol is a function which is called to return a structure
holding function pointers that gdb then uses. This structure is
versioned so that changes can be made without necessarily requiring a
simultaneous gdb upgrade.
Note that the C compiler API is broken out separately. This lets us
extend it to other GCC front ends as desired. We plan to investigate
C++ in the future.
include/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* gcc-c-fe.def: New file.
* gcc-c-interface.h: New file.
* gcc-interface.h: New file.
On Windows, a recent gnulib update imported the lstat module, and
this caused a remote-sim.c build failure in struct host_callback_struct:
In file included from /[...]/gdb/remote-sim.c:34:0:
/[...]/gdb/../include/gdb/callback.h:93:9: error: duplicate member '_stati64'
int (*lstat) (host_callback *, const char *, struct stat *);
^
What happens it that gnulib's stat.h makes the following defines:
/* Large File Support on native Windows. */
#if 1
# define stat _stati64
#endif
and then:
#if 1
# if ! 0
/* mingw does not support symlinks, therefore it does not have lstat. But
without links, stat does just fine. */
# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
# define lstat stat
# endif
So, the following fields in struct host_callback_struct...
int (*stat) (host_callback *, const char *, struct stat *);
int (*fstat) (host_callback *, int, struct stat *);
int (*lstat) (host_callback *, const char *, struct stat *);
... get translated to...
int (*_stati64) (host_callback *, const char *, struct _stati64 *);
int (*_fstati64) (host_callback *, int, struct _stati64 *);
int (*_stati64) (host_callback *, const char *, struct _stati64 *);
... which causes two fields to have the same name.
This patch fixes the issue by renaming the stat-related fields
by adding a "to_" prefix, similar to what is done in GDB's
target_ops vector.
include/gdb/ChangeLog:
* callback.h (struct host_callback_struct) <to_stat>: Renamed
from "stat".
<to_fstat>: Renamed from "fstat".
<to_lstat>: Renamed from "lstat".
sim/common/ChangeLog:
* sim-io.c (sim_io_stat, sim_io_fstat): Adjust calls to "stat"
and "fstat" callbacks by calls to "to_stat" and "to_fstat" (resp)
callbacks following renaming in callback.h.
* syscall.c (cb_syscall): Likewise. Adjust calls to "lstat"
callback by call to "to_lstat" callback
sim/cris/ChangeLog:
* traps.c (cris_break_13_handler): Adjust call to "fstat" callback
by call to "to_fstat" following renaming in callback.h.
sim/h8300/ChangeLog:
* compile.c (sim_resume): Adjust calls to "stat" and "fstat"
callbacks by calls to "to_stat" and "to_fstat" (resp) callbacks
following renaming in callback.h.
binutils:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* readelf.c (print_mips_isa_ext): Print the value of Octeon3.
gas:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3.
(mips_cpu_info_table): Octeon3 enables virt ase.
* doc/c-mips.texi: Document octeon3 as an acceptable value for
-march=.
gas/testsuite:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* gas/mips/mips.exp: Add support for Octeon3 architecture.
Also add in support for running Octeon3 tests.
* gas/mips/octeon3.d: New test.
* gas/mips/octeon3.s: New test source.
opcodes:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add octeon3.
* mips-opc.c (IOCT): Include INSN_OCTEON3.
(IOCT2): Likewise.
(IOCT3): New define.
(IVIRT): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti
IVIRT instructions.
Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another
operand for IOCT3.
bfd:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* archures.c: Add octeon3 for mips target.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c: Define I_mipsocteon3.
nfo_struct): Add octeon3 support.
* bfd/elfxx-mips.c: (_bfd_elf_mips_mach): Add support for
octeon3.
(mips_set_isa_flags): Add support for octeon3.
(bfd_mips_isa_ext): Add bfd_mach_mips_octeon3.
(mips_mach_extensions): Make bfd_mach_mips_octeon3 an
extension of bfd_mach_mips_octeon2.
(print_mips_isa_ext): Print the value of Octeon3.
bfd/
* elfxx-mips.c (print_mips_ases): Print unknown ASEs.
(print_mips_isa_ext): Print the value of an unknown extension.
binutils/
* readelf.c (print_mips_ases): Print unknown ASEs.
(print_mips_isa_ext): Print the value of an unknown extension.
include/
* elf/mips.h (AFL_ASE_MASK): Define.
This patch annotates the following SPARC instructions as VIS3B
instructions: ldx *, %efsr, fpadd64, fpsub64, fpcmpule8, fpcmpune8,
fpcmpugt8, fpcmpueq8. It also improves the documentation of the VIS3B
capability in several headers.
Tested in sparc64-unknown-linux-gnu and sparc-unknown-linux-gnu.
No visible regressions.
opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (sparc-opcodes): Annotate several instructions with
the HWCAP2_VIS3B hwcap.
include/opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc.h (HWCAP2_VIS3B): Documentation improved.
include/elf/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc.h (ELF_SPARC_HWCAP2_VIS3B): Documentation improved.
Add the relocation numbers defined in ABI release 1.0 but missing
from the current header. This will allow tools like objdump to dump
objects that use these relocations.
include/elf/ChangeLog:
2014-10-08 Will Newton <will.newton@linaro.org>
* aarch64.h: Sync up relocations with ABI release 1.0.
Refactor each relaxation pattern to raise the maintainability.
In origin, all patterns is analysed in nds32_elf_relax_section,
so it is hard to debug and maintain. Therefore, we classify all
patterns into different functions in this patch.
Moreover, we adjust all optimizations into nds32_elf_relax_section
to take these optimizations in turn. This can promise all relaxation
being done after calling gld${EMULATION_NAME}_after_allocation.
First, add nds32 audio ISA extension including opcodes and registers.
Second, redesign the disassemble implement.
The original disassemble decode instruction opcode using switch-case.
It is hard to synchronize when adding new instructions.
Therefore, the new implement reuses nds32_opcodes to dump the instructions.
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
(bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
* cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6.
* elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2
R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2,
R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16
and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elfn32-mips.c: Likewise.
* elfxx-mips.c (MIPSR6_P): New define.
(mipsr6_exec_plt_entry): New array.
(hi16_reloc_p): Add support for R_MIPS_PCHI16.
(lo16_reloc_p): Add support for R_MIPS_PCLO16.
(aligned_pcrel_reloc_p): New function.
(mips_elf_relocation_needs_la25_stub): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(mips_elf_calculate_relocation): Add support for relocs:
R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2,
R_MIPS_PCHI16 and R_MIPS_PCLO16.
(_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6.
(mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16.
(_bfd_mips_elf_check_relocs): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(_bfd_mips_elf_relocate_section): Add a check for unaligned
pc relative relocs.
(_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6
plt entry.
(mips_set_isa_flags): Add support for mips32r6 and mips64r6.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
(mips_32bit_flags_p): Add support for mips32r6.
* libbfd.h (bfd_reloc_code_real_names): Add entries for
BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2,
BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2.
* reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
binutils/
* readelf.c (get_machine_flags): Add support for mips32r6 and
mips64r6.
elfcpp/
* mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants.
gas/
* config/tc-mips.c (mips_nan2008): New static global.
(mips_flag_nan2008): Removed.
(LL_SC_FMT): New define.
(COP12_FMT): Updated.
(ISA_IS_R6): New define.
(ISA_HAS_64BIT_REGS): Add mips64r6.
(ISA_HAS_DROR): Likewise.
(ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_LEGACY_NAN): New define.
(options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
(mips_ase): Add field rem_rev.
(mips_ases): Updated to add which ISA an ASE was removed in.
(mips_isa_rev): Add support for mips32r6 and mips64r6.
(mips_check_isa_supports_ase): Add support to check if an ASE
has been removed in the specified MIPS ISA revision.
(validate_mips_insn): Skip '-' character.
(macro_build): Likewise.
(mips_check_options): Prevent R6 working with fp32, mips16,
micromips, or branch relaxation.
(file_mips_check_options): Set R6 floating point registers to
64 bit. Also deal with the nan2008 option.
(limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(match_check_prev_operand): New static function.
(match_same_rs_rt_operand): New static function.
(match_non_zero_reg_operand): New static function.
(match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(insns_between): Added case to deal with forbidden slots.
(append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
and BFD_RELOC_MIPS_26_PCREL_S2.
(match_insn): Add support for operands -A, -B, +' and +". Also
skip '-' character.
(mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
(md_parse_option): Add support for mips32r6 and mips64r6. Also
update the nan option handling.
(md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2.
(mips_force_relocation): Prevent forced relaxation for MIPS r6.
(md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(s_mipsset): Add support for mips32r6 and mips64r6.
(s_nan): Update to support the new nan2008 framework.
(tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(mips_elf_final_processing): Updated to use the mips_nan2008.
(mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
(macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
macros for R6.
(mips_fix_adjustable): Make PC relative R6 relocations relative
to the symbol and not the section.
* configure.ac: Add support for mips32r6 and mips64r6.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/24k-triple-stores-1.s: If testing for r6 prevent
non-supported instructions from being tested.
* gas/mips/24k-triple-stores-2.s: Likewise.
* gas/mips/24k-triple-stores-3.s: Likewise.
* gas/mips/24k-triple-stores-6.s: Likewise.
* gas/mips/beq.s: Likewise.
* gas/mips/eva.s: Likewise.
* gas/mips/ld-zero-3.s: Likewise.
* gas/mips/mips32-cp2.s: Likewise.
* gas/mips/mips32.s: Likewise.
* gas/mips/mips4.s: Likewise.
* gas/mips/add.s: Don't test the add instructions if r6, and
add padding.
* gas/mips/add.d: Check for a triple dot not a nop at the end of the
disassembly output.
* gas/mips/micromips@add.d: Likewise.
* gas/mips/mipsr6@24k-branch-delay-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2.d: New file.
* gas/mips/mipsr6@24k-triple-stores-3.d: New file.
* gas/mips/mipsr6@24k-triple-stores-6.d: New file.
* gas/mips/mipsr6@add.d: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file.
* gas/mips/mipsr6@beq.d: New file.
* gas/mips/mipsr6@bge.d: New file.
* gas/mips/mipsr6@bgeu.d: New file.
* gas/mips/mipsr6@blt.d: New file.
* gas/mips/mipsr6@bltu.d: New file.
* gas/mips/mipsr6@branch-misc-1.d: New file.
* gas/mips/mipsr6@branch-misc-2-64.d: New file.
* gas/mips/mipsr6@branch-misc-2pic-64.d: New file.
* gas/mips/mipsr6@branch-misc-4-64.d: New file.
* gas/mips/mipsr6@cache.d: New file.
* gas/mips/mipsr6@eva.d: New file.
* gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file.
* gas/mips/mipsr6@jal-svr4pic.d: New file.
* gas/mips/mipsr6@ld-zero-2.d: New file.
* gas/mips/mipsr6@ld-zero-3.d: New file.
* gas/mips/mipsr6@loc-swap-dis.d: New file.
* gas/mips/mipsr6@mips32-cp2.d: New file.
* gas/mips/mipsr6@mips32-imm.d: New file.
* gas/mips/mipsr6@mips32.d: New file.
* gas/mips/mipsr6@mips32r2.d: New file.
* gas/mips/mipsr6@mips4-fp.d: New file.
* gas/mips/mipsr6@mips4-fp.l: New file.
* gas/mips/mipsr6@mips4-fp.s: New file.
* gas/mips/mipsr6@mips4.d: New file.
* gas/mips/mipsr6@mips5-fp.d: New file.
* gas/mips/mipsr6@mips5-fp.l: New file.
* gas/mips/mipsr6@mips5-fp.s: New file.
* gas/mips/mipsr6@mips64.d: New file.
* gas/mips/mipsr6@msa-branch.d: New file.
* gas/mips/mipsr6@msa.d: New file.
* gas/mips/mipsr6@pref.d: New file.
* gas/mips/mipsr6@relax-swap3.d: New file.
* gas/mips/r6-64-n32.d: New file.
* gas/mips/r6-64-n64.d: New file.
* gas/mips/r6-64-removed.l: New file.
* gas/mips/r6-64-removed.s: New file.
* gas/mips/r6-64.s: New file.
* gas/mips/r6-attr-none-double.d: New file.
* gas/mips/r6-n32.d: New file.
* gas/mips/r6-n64.d: New file.
* gas/mips/r6-removed.l: New file.
* gas/mips/r6-removed.s: New file.
* gas/mips/r6.d: New file.
* gas/mips/r6.s: New file.
* gas/mips/mipsr6@mips32-dsp.d: New file.
* gas/mips/mipsr6@mips32-dspr2.d: New file.
* gas/mips/mipsr6@mips32r2-ill.l: New file.
* gas/mips/mipsr6@mips32r2-ill.s: New file.
* gas/mips/cache.s: Add r6 instruction varients.
* gas/mips/mips.exp: Add support for the mips32r6 and mips64r6
architectures. Also prevent non r6 supported tests from running.
Finally, add in support for running the new r6 tests.
(run_dump_test_arch): Add support for mipsr6 tests.
(run_list_test_arch): Add support for using files of the
form arch@testname.l .
include/elf/
* mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3,
R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(E_MIPS_ARCH_32R6): New define.
(E_MIPS_ARCH_64R6): New define.
include/opcode/
* mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT,
OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6
instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B,
+I, +O, +R, +:, +\, +", +;
(mips_check_prev_operand): New struct.
(INSN2_FORBIDDEN_SLOT): New define.
(INSN_ISA32R6): New define.
(INSN_ISA64R6): New define.
(INSN_UPTO32R6): New define.
(INSN_UPTO64R6): New define.
(mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6.
(ISA_MIPS32R6): New define.
(ISA_MIPS64R6): New define.
(CPU_MIPS32R6): New define.
(CPU_MIPS64R6): New define.
(cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6.
ld/
* ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6.
opcodes/
* mips-dis.c (mips_arch_choices): Add entries for mips32r6 and
mips64r6.
(parse_mips_dis_option): Allow MSA and virtualization support for
mips64r6.
(mips_print_arg_state): Add fields dest_regno and seen_dest.
(mips_seen_register): New function.
(print_insn_arg): Refactored code to use mips_seen_register
function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and
OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out
the register rather than aborting.
(print_insn_args): Add length argument. Add code to correctly
calculate the instruction address for pc relative instructions.
(validate_insn_args): New static function.
(print_insn_mips): Prevent jalx disassembling for r6. Use
validate_insn_args.
(print_insn_micromips): Use validate_insn_args.
all the arguments are valid.
* mips-formats.h (PREV_CHECK): New define.
* mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s,
-t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +;
(RD_pc): New define.
(FS): New define.
(I37): New define.
(I69): New define.
(mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded
MIPS R6 instructions from MIPS R2 instructions.
This change moves the microMIPS 10-bit uninterpreted immediate code
embedded at bits 25..16 in the SYSCALL, WAIT, SDBBP and HYPCALL
instructions from `B' over to `+J' which is the operand code used in
the standard MIPS instruction set for a similar code embedded at bits
20..11, currently used by HYPCALL only in that set.
opcodes/
* micromips-opc.c (decode_micromips_operand): Rename `B' to `+J'.
(micromips_opcodes): Use "+J" in place of "B" for "hypcall",
"sdbbp", "syscall" and "wait".
include/opcode/
* mips.h: Document the move of `MICROMIPSOP_*_CODE10' from `B'
over to `+J'.
addresses outside of the 32-bit range before memory exhaustion. This
results in a higher entropy implementation of ASLR when used with the
DYNAMIC_BASE flag.
* include/coff/pe.h: Add HIGH_ENTROPY_VA flag
* ld/emultempl/pep.em: Add --high-entropy-va switch
* ld/ld.texinfo: Document the --high-entropy-va switch
The main aim of this change was to have non_ir_ref set correctly on
new indirect symbols. I could have added a "copy" param to the "notice"
function, so that indirect symbols could be created in plugin_notice,
but it seemed cleaner to create indirect syms earlier and pass them
rather than "string" to "notice".
include/
* bfdlink.h (struct bfd_link_callbacks <notice>): Remove "string"
param, add "inh".
bfd/
* coff-aux.c (coff_m68k_aux_link_add_one_symbol): Only call "notice"
here when not calling the generic add_symbol function. Formatting.
Correct handling of indirect symbols. Update notice call.
* elflink.c (_bfd_elf_notice_as_needed): Update notice call.
* linker.c (_bfd_generic_link_add_one_symbol): Create indirect
symbols early. Update notice call. Add comments regarding weak
symbols vs. indirect.
ld/
* ldmain.c (notice): Update args.
* plugin.c (plugin_notice): Likewise. Follow warning sym link.
Handle new indirect symbol.
gas/
* config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC
and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout.
include/opcode/
* mips.h (INSN_LOAD_COPROC_DELAY): Rename to...
(INSN_LOAD_COPROC): New define.
(INSN_COPROC_MOVE_DELAY): Rename to...
(INSN_COPROC_MOVE): New define.
opcodes/
* micromips-opc.c (COD): Rename throughout to...
(CM): New define, update to use INSN_COPROC_MOVE.
(LCD): Rename throughout to...
(LC): New define, update to use INSN_LOAD_COPROC.
* mips-opc.c: Likewise.
* elf32-avr.c: Handle R_AVR_PORT5 and R_AVR_PORT6.
* reloc.c: Add BFD_RELOC_AVR_PORT5 and BFD_RELOC_AVR_PORT6.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* avr.h: Add R_AVR_PORT5 and R_AVR_PORT6.
* config/tc-avr.c (avr_operand): Permit referring to r26-r31 by
name as [xyz][hl]. Permit using a symbol whoes name begins with
`r' to refer to a register.
Allow arbitrary expressions for the P and p operators.
(md_apply_fix): Check the BFD_RELOC_AVR_PORT5 and
BFD_RELOC_AVR_PORT6 relocations.
* archures.c: add avrtiny architecture for avr target.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): add avrtiny arch info.
* elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16
added for 16 bit LDS/STS instruction of avrtiny arch.
(avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to
BFD_RELOC_AVR_LDS_STS_16.
(bfd_elf_avr_final_write_processing): select machine number avrtiny arch.
(elf32_avr_object_p): set machine number for avrtiny arch.
* libbfd.h: Regenerate.
* reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc.
* config/tc-avr.c (mcu_types): Add avrtiny arch.
Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
and attiny40.
(md_show_usage): Add avrtiny arch in usage message.
(avr_operand): validate and issue error for invalid register for avrtiny.
add new reloc exp for 16 bit lds/sts instruction.
(md_apply_fix): check 16 bit lds/sts operand for out of range and encode.
(md_assemble): check ISA for arch and issue diagnostic.
* include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number.
(R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number.
* include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA.
(AVR_ISA_2xxxa): define ISA without LPM.
(AVR_ISA_AVRTINY): define avrtiny arch ISA.
Add doc for contraint used in 16 bit lds/sts.
Adjust ISA group for icall, ijmp, pop and push.
Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints.
* opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
(print_insn_avr): do not select opcode if insn ISA is avrtiny and machine
is not avrtiny.
* Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source.
(eavrtiny.c): add rules for avrtiny emulation source.
* Makefile.in: Regenerate.
* configure.tgt: Add avrtiny to avr target emulations.
* scripttempl/avrtiny.sc: New file.
linker script template for avrtiny arch.
* emulparams/avrtiny.sh: New file.
emulation parameters for avrtiny arch.
Fixes issues with dwz multi-file (-m) and ld's -wrap option.
Symbols referenced from DWARF debug info in a separate file, eg. to
specify low and high pc, must use the real symbol. The DWARF info
is specifying attributes of the real function, not one interposed
with --wrap.
include/
* bfdlink.h (unwrap_hash_lookup): Declare.
bfd/
* linker.c (unwrap_hash_lookup): New function.
* elf-bfd (RELOC_FOR_GLOBAL_SYMBOL): Call unwrap_hash_lookup.
* elf32-i370.c (i370_elf_relocate_section): Likewise.
* elf32-m32c.c (m32c_elf_relocate_section): Likewise.
* elf32-m32r.c (m32r_elf_relocate_section): Likewise.
* elf32-score.c (s3_bfd_score_elf_relocate_section): Likewise.
* elf32-score7.c (s7_bfd_score_elf_relocate_section): Likewise.
* elf32-spu.c (spu_elf_relocate_section): Likewise.
* elf64-hppa.c (elf64_hppa_relocate_section): Likewise.
* config/tc-msp430.c (CHECK_RELOC_MSP430): Add OP parameter.
Generate BFD_RELOC_MSP430_ABS_HI16 if vshift is 1.
(msp430_srcoperand): Store vshift value in operand.
* msp430.h (struct msp430_operand_s): Add vshift field.
* gas/elf/struct.d: Expect extra output from some toolchains.
* gas/symver/symver0.d: Likewise.
* gas/symver/symver1.d: Likewise.
This patch firstly adds support for mips32r3 mips32r5, mips64r3
and mips64r5. Secondly it adds support for the eretnc instruction.
ChangeLog:
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r3, mips64r3,
mips32r5 and mips64r5.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
* cpu-mips.c (arch_info_struct): Likewise.
* elfxx-mips.c (mips_set_isa_flags): Likewise.
gas/
* tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
and mips64r5.
(ISA_HAS_64BIT_FPRS): Likewise.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
(ISA_HAS_DROR): Likewise.
(options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
OPTION_MIPS64R5.
(mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
(md_parse_option): Likewise.
(s_mipsset): Likewise.
(mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
and mips64r5. Also change p5600 entry to be mips32r5.
* configure.in: Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
-mips64r5 command line options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/mips.exp: Add MIPS32r5 tests. Also add the mips32r3,
mips32r5, mips64r3 and mips64r5 isas to the testsuite.
* gas/mips/r5.s: New test.
* gas/mips/r5.d: Likewise.
include/opcode/
* mips.h (INSN_ISA_MASK): Updated.
(INSN_ISA32R3): New define.
(INSN_ISA32R5): New define.
(INSN_ISA64R3): New define.
(INSN_ISA64R5): New define.
(INSN_ISA64, INSN_ISA64R2, INSN_ISA3_32, INSN_ISA3_32R2, INSN_ISA4_32
INSN_ISA4_32R2, INSN_ISA5_32R2): Renumbered.
(mips_isa_table): Add entries for mips32r3, mips32r5, mips64r3 and
mips64r5.
(INSN_UPTO32R3): New define.
(INSN_UPTO32R5): New define.
(INSN_UPTO64R3): New define.
(INSN_UPTO64R5): New define.
(ISA_MIPS32R3): New define.
(ISA_MIPS32R5): New define.
(ISA_MIPS64R3): New define.
(ISA_MIPS64R5): New define.
(CPU_MIPS32R3): New define.
(CPU_MIPS32R5): New define.
(CPU_MIPS64R3): New define.
(CPU_MIPS64R5): New define.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add MIPS32r5 eretnc instruction.
(I34): New define.
(I36): New define.
(I66): New define.
(I68): New define.
* mips-dis.c (mips_arch_choices): Add mips32r3, mips32r5, mips64r3 and
mips64r5.
(parse_mips_dis_option): Update MSA and virtualization support to
allow mips64r3 and mips64r5.
ChangeLog:
binutils/
* doc/binutils.texi: Document the disassemble MIPS XPA instructions
command line option.
gas/
* config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
(md_longopts): Add xpa and no-xpa command line options.
(mips_ases): Add MIPS XPA ASE.
(mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
* doc/as.texinfo: Document the MIPS XPA command line options.
* doc/c-mips.texi: Document the MIPS XPA command line options,
and assembler directives.
gas/testsuite/
* gas/mips/mips.exp: Add xpa tests.
* gas/mips/xpa.s: New test.
* gas/mips/xpa.d: Likewise.
include/
* opcode/mips.h (ASE_XPA): New define.
opcodes/
* mips-dis.c (mips_arch_choices): Update mips32r2 and mips64r2
to allow the MIPS XPA ASE.
(parse_mips_dis_option): Process the -Mxpa option.
* mips-opc.c (XPA): New define.
(mips_builtin_opcodes): Add MIPS XPA instructions and move the
locations of the ctc0 and cfc0 instructions.
bfd/
* peicode.h (pe_ILF_object_p): Adjust, as the version number
has been read.
(pe_bfd_object_p): Also read version number to detect ILF.
* pe-x86_64.c (COFF_WITH_PE_BIGOBJ): Define.
(x86_64pe_bigobj_vec): Define
* coffcode.h (bfd_coff_backend_data): Add _bfd_coff_max_nscns field.
(bfd_coff_max_nscns): New macro.
(coff_compute_section_file_positions): Use unsigned int for
target_index. Compare with bfd_coff_max_nscns.
(bfd_coff_std_swap_table, ticoff0_swap_table, ticoff1_swap_table):
Set a value for _bfd_coff_max_nscns.
(header_bigobj_classid): New constant.
(coff_bigobj_swap_filehdr_in, coff_bigobj_swap_filehdr_out)
(coff_bigobj_swap_sym_in, coff_bigobj_swap_sym_out)
(coff_bigobj_swap_aux_in, coff_bigobj_swap_aux_out): New
functions.
(bigobj_swap_table): New table.
* libcoff.h: Regenerate.
* coff-sh.c (bfd_coff_small_swap_table): Likewise.
* coff-alpha.c (alpha_ecoff_backend_data): Add value for
_bfd_coff_max_nscns.
* coff-mips.c (mips_ecoff_backend_data): Likewise.
* coff-rs6000.c (bfd_xcoff_backend_data)
(bfd_pmac_xcoff_backend_data): Likewise.
* coff64-rs6000.c (bfd_xcoff_backend_data)
(bfd_xcoff_aix5_backend_data): Likewise.
* targets.c (x86_64pe_bigobj_vec): Declare.
* configure.in (x86_64pe_bigobj_vec): New vector.
* configure: Regenerate.
* config.bfd: Add bigobj object format for Windows targets.
gas/
* config/tc-i386.c (use_big_obj): Declare.
(OPTION_MBIG_OBJ): Define.
(md_longopts): Add -mbig-obj option.
(md_parse_option): Handle it.
(md_show_usage): Display help for this option.
(i386_target_format): Use bigobj for x86-64 if -mbig-obj.
* doc/c-i386.texi: Document the option.
gas/testsuite/
* gas/pe/big-obj.d, gas/pe/big-obj.s: Add test.
* gas/pe/pe.exp: Add test.
include/coff/
* pe.h (struct external_ANON_OBJECT_HEADER_BIGOBJ): Declare.
(FILHSZ_BIGOBJ): Define.
(struct external_SYMBOL_EX): Declare.
(SYMENT_BIGOBJ, SYMESZ_BIGOBJ): Define.
(union external_AUX_SYMBOL_EX): Declare.
(AUXENT_BIGOBJ, AUXESZ_BIGOBJ): Define.
* internal.h (struct internal_filehdr): Change type
of f_nscns.
It is rare for people to want to modify the cmd arg. In general, they
really shouldn't be, but a few still do. For those who misbehave, dupe
the string locally so they can bang on it.
This adds support for "func@localentry", an expression that returns the
ELFv2 local entry point address of function "func". I've excluded
dynamic relocation support because that obviously would require glibc
changes.
include/elf/
* ppc64.h (R_PPC64_REL24_NOTOC, R_PPC64_ADDR64_LOCAL): Define.
bfd/
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_ADDR64_LOCAL entry.
(ppc64_elf_reloc_type_lookup): Support R_PPC64_ADDR64_LOCAL.
(ppc64_elf_check_relocs): Likewise.
(ppc64_elf_relocate_section): Likewise.
* Add BFD_RELOC_PPC64_ADDR64_LOCAL.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
(md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
ld/testsuite/
* ld-powerpc/elfv2-2a.s, ld-powerpc/elfv2-2b.s: New files.
* ld-powerpc/elfv2-2exe.d, ld-powerpc/elfv2-2so.d: New files.
* ld-powerpc/powerpc.exp: Run new test.
elfcpp/
* powerpc.h (R_PPC64_REL24_NOTOC, R_PPC64_ADDR64_LOCAL): Define.
gold/
* powerpc.cc (Target_powerpc::Scan::local, global): Support
R_PPC64_ADDR64_LOCAL.
(Target_powerpc::Relocate::relocate): Likewise.
Recent ppc64 Linux kernels provide a new auxv entry AT_HWCAP2,
which is currently not recognized by GDB, causing every use of
"info auxv" to show an error.
This commit adds the AT_HWCAP2 define to include/elf/common.h
and handles it in GDB.
include/elf/ChangeLog:
* common.h (AT_HWCAP2): Define.
gdb/ChangeLog:
* auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
This removes the remaining uses of PARAMS from include/cgen.
Tested by rebuilding; a file in opcodes includes this header.
2014-01-06 Tom Tromey <tromey@redhat.com>
* bitset.h: Remove uses of PARAMS.
The element index range for the following MIPS MSA instructions: sldi, splati,
copy_s, copy_u, insert and insve is 1 bit too large. This patch fixes this issue.
ChangeLog:
gas/testsuite/gas/mips/
* msa.s: Reduced maximum element index range for sldi, splati,
copy_s, copy_u, insert and insve instructions.
* msa64.s: Likewise.
* micromips@msa.d: Likewise.
* micromips@msa64.d: Likewise.
* msa.d: Likewise.
* msa64.d: Likewise.
include/opcode/
* mips.h: Updated description of +o, +u, +v and +w for MIPS and
microMIPS.
opcodes/
* micromips-opc.c (decode_micromips_operand): Reduced range of +o, +u,
+v and +w.
(micromips_opcodes): Reduced element index range for sldi, splati,
copy_s, copy_u, insert and insve instructions.
* opcodes/mips-opc.c (decode_mips_operand): Reduced range of +o, +u,
+v and +w.
(mips_builtin_opcodes): Reduced element index range for sldi, splati,
copy_s, copy_u, insert and insve instructions.
These files are source files and have no business being +x. We couldn't
easily fix it in CVS (you need login+write access to the raw rcs files),
but we can fix this w/git.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
bfd/
2013-11-27 Tristan Gingold <gingold@adacore.com>
* pei-x86_64.c (pex_regs): Make it const. Add comments.
(pex64_get_runtime_function): Do not split UnwindData.
(pex64_get_unwind_info): Extract the chain and the handler.
(pex64_xdata_print_uwd_codes): Rewritten: do not reverse print
the opcode, handle version 2, add consistency check, make the
code host neutral.
(pex64_dump_xdata): Change arguments to pass the section and its
content. Handle version 2, change output.
(pex64_bfd_print_pdata): Add comments, load section for xdata.
Avoid duplicate outputs.
include/coff
2013-11-27 Tristan Gingold <gingold@adacore.com>
* pe.h (struct pex64_runtime_function): Remove isChained.
(UWOP_SAVE_XMM): Add comment.
(struct pex64_unwind_info): Remove extra fields.
gas/
* config/tc-arm.c (arm_archs): New armv7ve architecture option.
(arm_cpus): Replace ARM_ARCH_V7A_IDIV_MP_SEC_VIRT with
ARM_ARCH_V7VE for cortex-a7, cortex-a12 and cortex-a15.
(cpu_arch_ver): Likewise.
* doc/c-arm.texi: Document armv7ve.
gas/testsuite/
* gas/arm/attr-march-armv7ve.d: New test case for armv7ve.
include/opcode/
* arm.h (ARM_AEXT_V7VE): New define.
(ARM_ARCH_V7VE): New define.
(ARM_ARCH_V7A_IDIV_MP_SEC_VIRT): Removed.
* config/tc-aarch64.c (set_other_error): New function.
(parse_sys_reg): Add new parameter 'sys_reg' and if non-NULL set
the variable to which it points with 'o'.
(parse_operands): Update; check for write to read-only system
registers or read from write-only ones.
gas/testsuite/
* gas/aarch64/diagnostic.s: Add tests.
* gas/aarch64/diagnostic.l: Update.
* gas/aarch64/tracereg-illegal.d: New file.
* gas/aarch64/tracereg-illegal.l: Ditto.
* gas/aarch64/tracereg-illegal.s: Ditto.
* gas/aarch64/tracereg.d: Ditto.
* gas/aarch64/tracereg.s: Ditto.
include/opcode
* aarch64.h (aarch64_sys_reg_readonly_p): New declaration.
(aarch64_sys_reg_writeonly_p): Ditto.
opcodes/
* aarch64-opc.c (CPENT): New define.
(F_READONLY, F_WRITEONLY): Likewise.
(aarch64_sys_regs): Add trace unit registers.
(aarch64_sys_reg_readonly_p): New function.
(aarch64_sys_reg_writeonly_p): Ditto.
* elfnn-aarch64.c (elfNN_aarch64_howto_table): Use
R_AARCH64_TLS_DTPMOD64 instead of R_AARCH64_TLS_DTPMOD;
likewise for R_AARCH64_TLS_DTPREL and R_AARCH64_TLS_TPREL.
include/elf/
* aarch64.h: Define R_AARCH64_TLS_DTPMOD64,
R_AARCH64_TLS_DTPREL64 and R_AARCH64_TLS_TPREL64; guard
R_AARCH64_TLS_DTPMOD, R_AARCH64_TLS_DTPREL and
R_AARCH64_TLS_TPREL with RELOC_MACROS_GEN_FUNC.
* config/tc-aarch64.c (parse_sys_reg): Update to use aarch64_sys_reg;
call aarch64_sys_reg_deprecated_p and warn about the deprecated
system registers.
gas/testsuite/
* gas/aarch64/deprecated.d: New file.
* gas/aarch64/deprecated.l: New file.
* gas/aarch64/deprecated.s: New file.
* gas/aarch64/sysreg-1.s: Add tests.
* gas/aarch64/sysreg-1.d: Add tests.
include/opcode/
* aarch64.h (aarch64_sys_reg): New typedef.
(aarch64_sys_regs): Change to define with the new type.
(aarch64_sys_reg_deprecated_p): Declare.
opcodes/
* aarch64-opc.c (F_DEPRECATED): New macro.
(aarch64_sys_regs): Update; flag "spsr_svc" and "spsr_hyp" with
F_DEPRECATED.
(aarch64_print_operand): Call aarch64_sys_reg_deprecated_p on
AARCH64_OPND_SYSREG.
This removes the DT_PPC_TLSOPT/DT_PPC64_TLSOPT dynamic tag and replaces
it with DT_PPC_OPT/DT_PPC64_OPT tag to provide the same functionality
and more. This isn't backwards compatible, but the TLSOPT tag hasn't
been used since the tls optimisation support was never submitted to
glibc.
/include/elf/
* ppc.h (DT_PPC_TLSOPT): Delete.
(DT_PPC_OPT, PPC_OPT_TLS): Define.
* ppc64.h (DT_PPC64_TLSOPT): Delete.
(DT_PPC64_OPT, PPC64_OPT_TLS, PPC64_OPT_MULTI_TOC): Define.
bfd/
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Use new DT_PPC_OPT
tag to specify tls optimisation.
* elf64-ppc.c (ppc64_elf_size_dynamic_sections): Likewise.
(ppc64_elf_finish_dynamic_sections): Specify whether multiple
toc pointers are used via DT_PPC64_OPT.
binutils/
* readelf.c (get_ppc_dynamic_type): Replace PPC_TLSOPT with PPC_OPT.
(get_ppc64_dynamic_type): Replace PPC64_TLSOPT with PPC64_OPT.
