* configure.host (hppa*-*-linux*): New target.
* configure.tgt (hppa*-*-linux*): Likewise.
* hppa-tdep.c (hppa_gdbarch_init): Set cannot_fetch_register, move
gdbarch_init_osabi() call earlier so that osabi-specific frame
unwinders can be registered first.
* config/djgpp/fnchange.lst: Add entries for hppa-linux-tdep.c and
hppa-linux-nat.c.
* config/pa/tm-hppa.h (ISR_REGNUM, PID0_REGNUM, PID1_REGNUM)
(PID2_REGNUM, PID3_REGNUM): Add definitions of some register numbers.
* config/pa/linux.mh: New file.
* config/pa/linux.mt: New file.
* config/pa/nm-linux.h: New file.
* config/pa/xm-linux.h: New file.
* hppa-linux-nat.c: New file.
* hppa-linux-tdep.c: New file.
* hppa-tdep.c (hppa32_return_value): Handle both 4- and 8-byte fp
return values.
(hppa32_push_dummy_call): Fix small struct and floating point argument
passing, and make sure the stack frame is properly aligned.
dup_common fields.
(setup_sections): Use som_subspace_dictionary_record struct instead
subspace_dictionary_record. Set SEC_LINK_ONCE if subspace is
is_comdat, is_common or dup_common.
(som_prep_headers): Use som_subspace_dictionary_record struct. Set
is_comdat, is_common and dup_common in section subspace_dict from
copy_data.
(som_begin_writing): Use som_subspace_dictionary_record struct.
(som_finish_writing): Likewise.
(som_bfd_derive_misc_symbol_info): Add support to set is_comdat,
is_common and dup_common flags in info for symbol. Add comment
regarding linker support for these fields. Slightly reorganize
function.
(som_build_and_write_symbol_table): Set is_comdat, is_common and
dup_common fields in symbol table from symbol info.
(bfd_som_set_subsection_attributes): Add comdat, common and dup_common
arguments. Set corresponding fields in copy_data. Change all callers.
(som_bfd_ar_write_symbol_stuff): Set dup_common flag in library
symbol table.
(som_vec): Add SEC_LINK_ONCE to applicable section flags.
* som.h (som_subspace_dictionary_record): Define.
(som_copyable_section_data_struct): Add is_comdat, is_common and
dup_common fields.
(som_section_data_struct): Use som_subspace_dictionary_record struct
instead of subspace_dictionary_record.
(bfd_boolean bfd_som_set_subsection_attributes): Adjust prototype.
* config/obj-som.c (obj_som_init_stab_section): Add new arguments in
call to obj_set_subsection_attributes.
(obj_som_init_stab_section): Likewise.
* config/tc-hppa.c (default_subspace_dict): Add comdat field.
(pa_def_subspaces): Provide comdat default.
(pa_subspace): Handle new "comdat" parameter. Set SEC_LINK_ONCE and
not SEC_IS_COMMON if section is comdat, common or dup_common. Update
calls to create_new_subspace and update_subspace to pass comdat flag.
(create_new_subspace, update_subspace): Add new comdat argument. Use
it in calls to obj_set_subsection_attributes.
* doc/c-hppa.texi (.subspa, .nsubspa): Document new comdat parameter
and use of comdat, common and dup_comm parameters.
if set. Check reloc_done flag before applying relocations. Use
output addresses, both when applying relocations and when comparing
against the specified section.
(elf_xtensa_relocate_section): Use output address to check if dynamic
reloc is in a literal pool. Set section's reloc_done flag.
2004-04-27 Paolo Bonzini <bonzini@gnu.org>
Revert:
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (flags_to_pass): Remove *dir variables that
are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
as well as prefix and exec_prefix.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (host_modules): Mark with the bootstrap
flag packages on which gcc depends.
* Makefile.tpl (all-bootstrap): Use it.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (flags_to_pass): Remove *dir variables that
are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
as well as prefix and exec_prefix.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Invoke ACX_PROG_CMP_IGNORE_INITIAL.
* configure: Regenerate.
* config/acx.m4: Mutuate ACX_PROG_CMP_IGNORE_INITIAL from gcc.
* gcc/Makefile.tpl (compare): Use the result of the test.
* gcc/Makefile.in: Regenerate.
2004-04-23 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (all-stage1-gcc, all-stage2-gcc, all-stage3-gcc):
Always relocate gcc and prev-gcc to the original names, even
if the build fails.
(new-cleanstrap, new-restage1, new-restage2, new-restage3):
New targets.
* elf32-sh64.c (elf_backend_section_flags): New. Defined.
(sh64_elf_set_mach_from_flags): Remove the kludge for .cranges
section.
(sh64_elf_section_flags): New. Set SEC_DEBUGGING for .cranges
section.
From Paul Koning <pkoning@equallogic.com>:
* breakpoint.c (free_valchain): New function.
(insert_bp_location, delete_breakpoint): Use free_valchain.
(remove_breakpoint): Do not remove the valchain.
(bpstat_stop_status): If not stopped by watchpoint, skip
watchpoints when generating stop status list.
* infrun.c (handle_inferior_event): Make
stepped_after_stopped_by_watchpoint a global variable.
* remote.c (remote_stopped_data_address): Return watch data
address rather than zero if stepped_after_stopped_by_watchpoint is
set.
* hppa-tdep.c (hppa_stub_unwind_cache, hppa_stub_frame_unwind_cache)
(hppa_stub_frame_this_id, hppa_stub_frame_prev_register)
(hppa_stub_frame_unwind, hppa_stub_unwind_sniffer): New stub unwinder
for handling stackless frames.
(hppa_gdbarch_init): Link in hppa_stub_unwind_sniffer.
2004-04-23 Chris Demetriou <cgd@broadcom.com>
* coff-mips.c (mips_relhi_reloc, mips_rello_reloc)
(mips_switch_reloc, mips_read_relocs, mips_relax_section)
(mips_relax_pcrel16, PCREL16_EXPANSION_ADJUSTMENT): Remove.
(mips_relocate_hi): Remove now-unused 'adjust' and 'pcrel' arguments,
and update comments to reflect current usage.
(mips_howto_table): Remove entries for MIPS_R_RELHI, MIPS_R_RELLO,
and MIPS_R_SWITCH, as well as several empty entries. Update comment
for MIPS_R_PCREL16.
(mips_ecoff_swap_reloc_in, mips_ecoff_swap_reloc_out)
(mips_adjust_reloc_out, mips_bfd_reloc_type_lookup): Remove support
for MIPS_R_SWITCH, MIPS_R_RELLO, and MIPS_R_RELHI relocations.
(mips_adjust_reloc_in): Likewise, adjust maximum accepted relocation
type number to be MIPS_R_PCREL16.
(mips_relocate_section): Remove support for link-time relaxation
of branches used by embedded-PIC. Remove support for MIPS_R_SWITCH,
MIPS_R_RELLO, and MIPS_R_RELHI relocations.
(_bfd_ecoff_bfd_relax_section): Redefine to bfd_generic_relax_section.
* ecoff.c (ecoff_indirect_link_order): Remove support for link-time
relaxation of branches used by embedded-PIC.
* ecofflink.c (bfd_ecoff_debug_accumulate): Likewise.
* libecoff.h (struct ecoff_section_tdata): Remove embedded-PIC
related members, update comment.
* pe-mips.c: Remove disabled (commented-out and #if 0'd)
code related to embedded-PIC.
* elfxx-mips.c (_bfd_mips_elf_read_ecoff_info): Remove
initialization of now-removed 'adjust' member of
'struct ecoff_debug_info'.
[ include/coff/ChangeLog ]
2004-04-23 Chris Demetriou <cgd@broadcom.com>
* mips.h (MIPS_R_RELHI, MIPS_R_RELLO, MIPS_R_SWITCH): Remove
(MIPS_R_PCREL16): Update comment.
* ecoff.h (struct ecoff_value_adjust): Remove structure.
(struct ecoff_debug_info): Remove 'adjust' member.
* elf32-arm.h (elf32_arm_check_relocs): Don't output REL32
relocs for locally defined symbols during -shared final link.
(elf32_arm_final_link_relocate): Likewise.
