There are legitimate reasons to allow a signed value in a cmpli insn
field, for example to test for a "stw r1,lock@sdarel(r13)" instruction
in user code, a kernel might use
subis r3,r3,STW_R1_0R13@ha # subtract off high part
cmplwi r3,lock@sdarel # is low part accessing lock?
Since the lock@sdarel may take a range of -32768 to 32767,
the allowed range of cmpli immediate must be at least [-32768,65535].
bfd/
* elf32-ppc.c (ppc_elf_relocate_section): Treat field of cmpli
insn as a bitfield; Use complain_overflow_bitfield.
* elf64-ppc.c (ppc64_elf_relocate_section): Likewise.
opcodes/
* ppc-opc.c (UISIGNOPT): Define and use with cmpli.
gas/
* config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
on unsigned fields. Comment on PPC_OPERAND_SIGNOPT signed fields
in 64-bit mode.
gold/
* powerpc.cc (relocate): Treat field of cmpli insn as a bitfield.
The goal of this patch is to provide an easy way to make
--disable-werror the default when building binutils, or the parts
of binutils that need to get built when building GDB. In development
mode, we want to continue making -Werror the default with GCC.
But, when making releases, I think we want to make it as easy as
possible for regular users to successfully build from sources.
GDB already has this kind of feature to turn -Werror as well as
the use of the libmcheck library. As GDB Release Manager, I take
advantage of it to turn those off after having cut the branch.
I'd like to be able to do the same for the binutils bits. And
perhaps Tristan will want to do the same for his releases too
(not sure, binutils builders might be a little savvier than GDB
builders).
This patch introduces a new file, called development.sh, which
just sets a variable called $development. In our development branches
(Eg. "master"), it's set to true. But setting it to false would allow
us to change the default behavior of various development-related
features to be turned off; in this case, it turns off the use of
-Werror by default (use --enable-werror to turn it back on).
bfd/ChangeLog:
* development.sh: New file.
* warning.m4 (AM_BINUTILS_WARNINGS): Source bfd/development.sh.
Make -Werror the default with GCC only if DEVELOPMENT is true.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
$(srcdir)/development.sh.
* Makefile.in, configure: Regenerate.
binutils/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gas/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gold/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): New.
* Makefile.in, configure: Regenerate.
gprof/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
ld/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
opcodes/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gdb/ChangeLog:
* development.sh: Delete.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure.ac: Adjust development.sh source call.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: Adjust development.sh source call.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure: Regenerate.
Tested on x86_64-linux by building two ways: One with DEVELOPMENT
set to true, and one with DEVELOPMENT set to false. In the first
case, I could see the use of -Werror, while it disappeared in
the second case.
Add an assert and remove an unused line of code.
bfd/ChangeLog:
2014-06-04 Will Newton <will.newton@linaro.org>
* elfnn-aarch64.c (tpoff_base): Make test of tls_sec
being non-NULL into an assert.
(elfNN_aarch64_tls_relax): Remove unused code.
out that the section is supposed to be page-aligned, but the newly merged
section was not being padded out to a page boundary. This meant that when
the executable was stripped a badly sized .rsrc section was written out.
PR ld/16807
* peXXigen.c (rsrc_process_section): Page align the new contents
befgore writing out.
Power8 fuses addis,addi and addis,ld sequences when the target of the
addis is the same as the addi/ld. Thus
addis r12,r2,xxx@ha
addi r12,r12,xxx@l / ld r12,xxx@l(r12)
is faster than
addis r11,r2,xxx@ha
addi r12,r11,xxx@l / ld r12,xxx@l(r11)
So use the form that allows fusion in plt call and branch stubs.
bfd/
* elf64-ppc.c (ADDIS_R12_R2): Define.
(build_plt_stub): Support fusion on ELFv2 stub.
(ppc_build_one_stub): Likewise for plt branch stubs.
gold/
* powerpc.cc (addis_12_2): Define.
(Stub_table::do_write): Support fusion on ELFv2 stubs.
ld/testsuite/
* ld-powerpc/elfv2exe.d: Update for changed plt call stubs.
gdb/
* ppc64-tdep.c (ppc64_standard_linkage8): New.
(ppc64_skip_trampoline_code): Recognise ELFv2 stub supporting fusion.
2014-05-28 Tristan Gingold <gingold@adacore.com>
* dwarf2.c (lookup_address_in_function_table): Add best_fit_len
to keep the length of the best fit range.
(lookup_symbol_in_function_table, info_hash_lookup_funcinfo):
Likewise.
1) _SDA_BASE_ and _SDA2_BASE_ and defined automatically, in a similar
manner to the way _GLOBAL_OFFSET_TABLE_ is handled. It's a little
more complicated to remove the symbols because _SDA_BASE_ needs to
be there if either .sdata or .sbss is present, and similarly for
_SDA2_BASE.
2) The linker created .sdata and .sdata2 sections used for
R_PPC_EMB_SDAI16 and R_PPC_EMB_SDA2I16 pointers are created early.
Nowadays we strip unneeded sections from the output, so it isn't
necessary to delay creating the sections.
3) The output section for targets of various SDA relocs is now checked
as per the ABI(s). We previously allowed .sdata.foo and similar,
most likely because at some stage we were checking input sections.
Also, the patch fixes a long-standing bug in size_input_sections
that affects the values of symbols defined in stripped input
sections.
PR 16952
bfd/
* elf32-ppc.c (ppc_elf_create_linker_section): Move earlier.
Remove redundant setting of htab->elf.dynobj. Don't align.
Define .sdata symbols using _bfd_elf_define_linkage_sym.
(ppc_elf_create_glink): Call ppc_elf_create_linker_section.
(create_sdata_sym): Delete.
(elf_allocate_pointer_linker_section): Rename from
elf_create_pointer_linker_section. Align section.
(ppc_elf_check_relocs): Don't call ppc_elf_creat_linker_section
directly here, or create_sdata_sym. Set ref_regular on _SDA_BASE_
and _SDA2_BASE_.
(ppc_elf_size_dynamic_sections): Remove ATTRIBUTE_UNUSED on param.
Remove unnecessary tests on _SDA_BASE_ sym.
(maybe_strip_sdasym, ppc_elf_maybe_strip_sdata_syms): New functions.
(ppc_elf_relocate_section): Tighten SDA reloc symbol section checks.
* elf32-ppc.h (ppc_elf_set_sdata_syms): Delete.
(ppc_elf_maybe_strip_sdata_syms): Declare.
ld/
* emulparams/elf32ppccommon.sh (_SDA_BASE_, _SDA2_BASE_): Delete.
* emultempl/ppc32elf.em (ppc_before_allocation): Call
ppc_elf_maybe_strip_sdata_syms.
* ldlang.c (size_input_section): Correct output_offset value
for excluded input sections.
original patches were posted:
pe/coff: Display GUID build-id in the conventional way
pe/coff: Don't interpret debug directory in section with no contents
pe/coff: Keep .build-id with --only-keep-debug
pe/coff: Don't break .build-id with objcopy/strip
* peXXigen.c (pe_print_debugdata): Don't interpret debug directory
in a section with no contents.
(is_vma_in_section, find_section_by_vma): New functions.
(_bfd_XX_bfd_copy_private_bfd_data_common): Recalculate file
offsets in the debug directory.
(_bfd_XXi_slurp_codeview_record, _bfd_XXi_write_codeview_record):
Byte-swap GUID from little-endian to big-endian order for
consistent and conventional display.
* objcopy.c (is_nondebug_keep_contents_section): New function.
(setup_section): Use it.
or 64-bit doubles. It also makes the linker complain if the user attempts
to link together binaries with different sized doubles.
* elf32-rl78.c (rl78_elf_merge_private_bfd_data): Complain if
64-bit doubles objects mix with 32-bit doubles objects.
(rl78_elf_print_private_bfd_data): Describe 64-bit doubles flag.
* readelf.c (get_machine_flags): Handle RL78 64-bit doubles flag.
* config/tc-rl78.c (enum options): Add OPTION_32BIT_DOUBLES
and OPTION_64BIT_DOUBLES.
(md_longopts): Add -m32bit-doubles and -m64bit-doubles.
(md_parse_option): Parse -m32bit-doubles and -m64bit-doubles.
(md_show_usage): Show all of the RL78 options.
(rl78_float_cons): New static functions.
(md_pseudo_table): Update handler for "double".
R_XTENSA_DIFF relocation offsets are in fact signed. Treat them as such.
Add testcase that examines ld behaviour on R_XTENSA_DIFF relocation
changing sign during relaxation.
2014-05-02 Volodymyr Arbatov <arbatov@cadence.com>
David Weatherford <weath@cadence.com>
Max Filippov <jcmvbkbc@gmail.com>
bfd/
* elf32-xtensa.c (relax_section): treat R_XTENSA_DIFF* relocations as
signed.
gas/
* config/tc-xtensa.c (md_apply_fix): mark BFD_RELOC_XTENSA_DIFF*
fixups as signed.
ld/testsuite/
* ld-xtensa/diff_overflow.exp, * ld-xtensa/diff_overflow1.s,
* ld-xtensa/diff_overflow2.s: Add test for DIFF* relocation
signedness and overflow checking.
