set_cmd_cfunc is only used in cli-decode.c, and I don't think there is
a good reason to expose it directly. So, this patch makes it private.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* command.h (set_cmd_cfunc): Don't declare.
* cli/cli-decode.c (set_cmd_cfunc): Now static.
This constifies add_com_suppress_notification and fixes the one
caller.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* stack.c (select_frame_command): Constify.
* cli/cli-decode.c (add_com_suppress_notification): Constify.
* command.h (add_com_suppress_notification): Constify.
This changes add_abbrev_prefix_cmd to take a const-taking callback
function and then fixes the one caller.
gdb/ChangeLog
2017-11-07 Tom Tromey <tom@tromey.com>
* breakpoint.c (stop_command): Constify.
* cli/cli-decode.c (struct cmd_list_element): Constify.
* command.h (add_abbrev_prefix_cmd): Constify.
A small number of NPS400 instruction incorrectly used NONE as an
insn_class_t, which would trigger a build warning. Fixed by changing to
MISC.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Change incorrect use of NONE to MISC.
Jim has recently started working at SiFive, where he'll be contributing
to our binutils port. Andrew and I would like him to be a maintainer.
My understanding is that this is right place to ask.
I've also changed my address to my SiFive one, where I also work -- it
seems cleaner to have everyone use our proper email address. While I
was in there, I noticed a trailing space after Andrew's name so I went
ahead and removed it as well.
binutils/ChangeLog
2017-11-07 Palmer Dabbelt <palmer@sifive.com>
* MAINTAINERS (RISC-V): Add Jim Wilson as a maintainer.
Clean up Andrew's entry (remove trailing space, add tabs).
Change Palmer's email address, and clean up entry (add tabs).
This fixes some EH failures for the medany code model in the g++ testsuite.
The problem is that the assembler is computing some values in the eh_frame
section as constants, that instead should have had relocs to be resolved by
the linker. This happens in output_cfi_insn in the DW_CFA_advance_loc case
where it compares label frags and immediately simplifies if they are the
same. We can fix that by forcing a new frag after every instruction
that the linker can reduce in size. I've also added a testcase to verify
the fix. This was tested with binutils make check, and gcc/g++ make checks on
qemu for medlow and medany code models.
gas/
* config/tc-riscv.c (append_insn): Call frag_wane and frag_new at
end for linker optimizable relocs.
* testsuite/gas/riscv/eh-relocs.d: New.
* testsuite/gas/riscv/eh-relocs.s: New.
* testsuite/gas/riscv/riscv.exp: Run eh-relocs test.
The RISC-V privileged ISA changed the name of sptbr (Supervisor Page
Table Base Register) to satp (Supervisor Address Translation and
Protection) to reflect the fact it could be used for more than just
paging. This patch adds an alias, as they're the same register.
include/ChangeLog
2017-11-06 Palmer Dabbelt <palmer@dabbelt.com>
* opcode/riscv-opc.h (sptbr): Rename to satp.
(CSR_SPTBR): Rename to CSR_SATP.
(sptbr): Alias to CSR_SATP.
gas/ChangeLog
2017-11-06 Palmer Dabbelt <palmer@dabbelt.com>
* testsuite/gas/riscv/satp.d: New test.
testsuite/gas/riscv/satp.s: Likewise.
testsuite/gas/riscv/riscv.exp: Likewise.
config/tc-riscv.c (md_begin): Handle CSR aliases.
Some extra thoroughness tests that I had over here.
gdb/testsuite/ChangeLog:
2017-11-07 Pedro Alves <palves@redhat.com>
* gdb.cp/ena-dis-br-range.exp: Add more tests.
... and also make GDB catch a few more cases of invalid input.
This fixes the inconsistency in GDB's output (e.g., "bad" vs "Bad")
exposed by the new tests added in the previous commit.
Also, makes the "0-0" and "inverted range" cases be loud errors.
Also makes GDB reject negative breakpoint number in ranges. We
already rejected negative number literals, but you could still subvert
that via convenience variables, like:
(gdb) set $bp -1
(gdb) disable $bp.1-2
The change to get_number_trailer fixes a bug exposed by the new tests.
The function did not handle parsing "-$num". [This wasn't visible in
the gdb.multi/tids.exp (which has similar tests) because the TID range
parsing is implemented differently.]
gdb/ChangeLog:
2017-11-07 Pedro Alves <palves@redhat.com>
* breakpoint.c (extract_bp_kind): New enum.
(extract_bp_num, extract_bp_or_bp_range): New functions, partially
factored out from ...
(extract_bp_number_and_location): ... here.
* cli/cli-utils.c (get_number_trailer): Handle '-$variable'.
gdb/testsuite/ChangeLog:
2017-11-07 Pedro Alves <palves@redhat.com>
* gdb.base/ena-dis-br.exp (test_ena_dis_br): Adjust test.
* gdb.cp/ena-dis-br-range.exp: Adjust tests.
(disable_invalid, disable_inverted, disable_negative): New
procedures.
("bad numbers"): New set of tests.
This adds tests that exercise the "bad breakpoint number" paths.
Specifically:
- malformed ranges
- use of explicit 0 as bp/loc number.
- inverted ranges
I'm adding this as a baseline to improve. This shows that there's a
lot of inconsistency in GDB's output (e.g., "bad" vs "Bad").
Also, IMO, the "0-0" and inverted range cases should be loud errors.
That and more will all be addressed in the next patch.
gdb/testsuite/ChangeLog:
2017-11-07 Pedro Alves <palves@redhat.com>
* gdb.cp/ena-dis-br-range.exp: Add tests.
It's odd that when parsing a breakpoint or location number, we error out
in most cases, but warn in others.
(gdb) disable 1-
bad breakpoint number at or near: '1-'
(gdb) disable -1
bad breakpoint number at or near: '-1'
(gdb) disable .foo
bad breakpoint number at or near: '.foo'
(gdb) disable foo.1
Bad breakpoint number 'foo.1'
(gdb) disable 1.foo
warning: bad breakpoint number at or near '1.foo'
This changes GDB to always error out. It required touching one testcase
that expected the warning.
gdb/ChangeLog:
2017-11-07 Pedro Alves <palves@redhat.com>
* breakpoint.c (extract_bp_number_and_location): Change return
type to void. Throw error instead of warning.
(enable_disable_command): Adjust.
gdb/testsuite/ChangeLog:
2017-11-07 Pedro Alves <palves@redhat.com>
* gdb.base/ena-dis-br.exp: Don't expect "warning:".
When a breakpoint has multiple locations, like e.g.:
Num Type Disp Enb Address What
1 breakpoint keep y <MULTIPLE>
1.1 y 0x080486a2 in void foo<int>()...
1.2 y 0x080486ca in void foo<double>()...
[....]
1.5 y 0x080487fa in void foo<long>()...
it's possible to enable/disable the individual locations using the
'<breakpoint_number>.<location_number>' syntax, like e.g.:
(gdb) disable 1.2 1.3 1.4 1.5
That's inconvenient when you have a long list of locations to disable,
however.
This patch adds shorthand for the above, by making it possible to
specify a range of locations with the following syntax (similar to
thread id ranges):
<breakpoint_number>.<first_location_number>-<last_location_number>
For example, the command above can now be simplified to:
(gdb) disable 1.2-5
gdb/ChangeLog:
2017-11-07 Xavier Roirand <roirand@adacore.com>
Pedro Alves <palves@redhat.com>
* breakpoint.c (map_breakpoint_number_range): New, factored out
from ...
(map_breakpoint_numbers): ... here.
(find_location_by_number): Change parameters from string to
breakpoint number and location.
(extract_bp_number_and_location): New function.
(enable_disable_bp_num_loc)
(enable_disable_breakpoint_location_range)
(enable_disable_command): New functions, factored out ...
(enable_command, disable_command): ... these functions, and
adjusted to support ranges.
* NEWS: Document enable/disable breakpoint location range feature.
gdb/doc/ChangeLog:
2017-11-07 Xavier Roirand <roirand@adacore.com>
Pedro Alves <palves@redhat.com>
* gdb.texinfo (Set Breaks): Document support for breakpoint
location ranges in the enable/disable commands.
gdb/testsuite/ChangeLog:
2017-11-07 Xavier Roirand <roirand@adacore.com>
Pedro Alves <palves@redhat.com>
* gdb.base/ena-dis-br.exp: Add reference to
gdb.cp/ena-dis-br-range.exp.
* gdb.cp/ena-dis-br-range.exp: New file.
* gdb.cp/ena-dis-br-range.cc: New file.
gas * config/tc-arm.c (arm_cpus):
Change FPU_ARCH_CRYPTO_NEON_VFP_ARMV8
into FPU_ARCH_CRYPTO_NEON_VFP_ARMV8_DOTPROD.
include * opcode/arm.h (FPU_ARCH_CRYPTO_NEON_VFP_ARMV8_DOTPROD):
New macro.
I'd edited these thinking that there might be cases where the counts
were one, but on further investigation it appears not. What's left
here are some minor tweaks.
* read.c (assemble_one, s_bundle_unlock): Formatting.
Consistently add comma and "bytes" to error message.
* testsuite/gas/i386/bundle-bad.l: Adjust to suit.
If binutils is going to use ngettext, then we'd better arrange for
intl/ to be compiled if the system gettext lacks ngettext.
* configure.ac: Invole AM_GNU_GETTEXT with need_ngettext.
* configure: Regenerate.
* aclocal.m4: Regenerate.
binutils has lacked proper pluralization of output messages for a long
time, for example, readelf will display information about a section
that "contains 1 entries" or "There are 1 section headers". Fixing
this properly requires us to use ngettext, because other languages
have different rules to English.
This patch defines macros for ngettext and friends to handle builds
with --disable-nls, and tidies the existing nls support. I've
redefined gettext rather than just defining "_" as dgettext in bfd and
opcodes in case someone wants to use gettext there (which might
conceivably happen with generated code).
bfd/
* sysdep.h: Formatting, comment fixes.
(gettext, ngettext): Redefine when ENABLE_NLS.
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
(_): Define using gettext.
(textdomain, bindtextdomain): Use safer "do nothing".
* hosts/alphavms.h (textdomain, bindtextdomain): Likewise.
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
opcodes/
* opintl.h: Formatting, comment fixes.
(gettext, ngettext): Redefine when ENABLE_NLS.
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
(_): Define using gettext.
(textdomain, bindtextdomain): Use safer "do nothing".
binutils/
* sysdep.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
gas/
* asintl.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
gold/
* system.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
ld/
* ld.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
The comment about Lynx in child_terminal_init reads a bit odd, since
it's not exactly clear what "This" in "This is for Lynx" is referring
to. Looking back in history makes it clearer. When the comment was
originally added, in commit 91ecc8efa9, back in 1994, the code
looked like this:
~~~
#ifdef PROCESS_GROUP_TYPE
#ifdef PIDGET
/* This is for Lynx, and should be cleaned up by having Lynx be
a separate debugging target with a version of
target_terminal_init_inferior which passes in the process
group to a generic routine which does all the work (and the
non-threaded child_terminal_init_inferior can just pass in
inferior_pid to the same routine). */
inferior_process_group = PIDGET (inferior_pid);
#else
inferior_process_group = inferior_pid;
#endif
#endif
~~~
So this looked like it was about when GDB was growing support for
multi-threading, and inferior_pid was still a single int for most
ports.
Eventually we got ptid_t, so the comment isn't really useful today.
Particularly more so since we no longer support Lynx as a GDB host.
The only caller left of child_terminal_init_with_pgrp is gnu-nat.c
(the Hurd), and that target uses fork-child, so when we reach
gnu_terminal_init after spawning a new child, the current inferior
must already have the PID set, and the child must be a process group
leader.
We can't add a 'getpgid(inf->pid) == inf->pid' assertion to
child_terminal_init though (like a previous version of this patch was
doing [1]), because child_terminal_init is also reached after
attaching to a process. If we did, the new
gdb.base/attach-non-pgrp-leader.exp test would fail, with:
(gdb) attach 12415
Attaching to program: build/gdb/testsuite/outputs/gdb.base/attach-non-pgrp-leader/attach-non-pgrp-leader, process 12415
src/gdb/inflow.c:180: internal-error: void child_terminal_init(target_ops*): Assertion `getpgid (inf->pid) == inf->pid' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.base/attach-non-pgrp-leader.exp: child: attach to child (GDB internal error)
I'm not making GDB save the pgid for attached processes with getpgid
for now, because the saved process group affects other things which
I'm leaving for following patches, like e.g., the "interrupt" command.
[1] - https://sourceware.org/ml/gdb-patches/2017-11/msg00039.html
gdb/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* gnu-nat.c (gnu_terminal_init): Delete.
(gnu_target): Don't install gnu_terminal_init.
* inflow.c (child_terminal_init_with_pgrp): Delete, merged with ...
(child_terminal_init): ... this function.
The patch at
<https://sourceware.org/ml/gdb-patches/2017-11/msg00039.html> was
proposing to add an assertion to child_terminal_init that turns out
would fail if you tried to attach to a process that isn't a process
group leader.
Since the testsuite failed to catch the problem, this commit adds a
new testcase that would catch it, like:
(gdb) attach 12415
Attaching to program: build/gdb/testsuite/outputs/gdb.base/attach-non-pgrp-leader/attach-non-pgrp-leader, process 12415
src/gdb/inflow.c:180: internal-error: void child_terminal_init(target_ops*): Assertion `getpgid (inf->pid) == inf->pid' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.base/attach-non-pgrp-leader.exp: child: attach to child (GDB internal error)
gdb/testsuite/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* gdb.base/attach-non-pgrp-leader.c: New.
* gdb.base/attach-non-pgrp-leader.exp: New.
common/common.m4 still had checks for termio.h/sgtty.h that are stale
now. Remove them.
gdb/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* common/common.m4 (GDB_AC_COMMON): No longer check termio.h nor
sgtty.h.
* config.in, configure: Regenerate.
gdb/gdbserver/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* config.in, configure: Regenerate.
The STOP_SIGNAL macro was originally added for Convex Unix
(https://en.wikipedia.org/wiki/Convex_Computer).
In:
git show 7a67dd45ca1c:gdb/m-convex.h
we see:
~~~
/* Use SIGCONT rather than SIGTSTP because convex Unix occasionally
turkeys SIGTSTP. I think. */
#define STOP_SIGNAL SIGCONT
~~~
That's gdb-3.5, 1990... In gdb/ChangeLog-3.x we see:
~~~
Tue Apr 18 13:43:37 1989 Randall Smith (randy at apple-gunkies.ai.mit.edu)
Various changes involved in 1) getting gdb to work on the convex,
[...]
Made whatever signal indicates a stop configurable (via macro
STOP_SIGNAL).
(main): Setup use of above as a signal handler. Added check for
"-nw" in args already processed.
(command_line_input): SIGTSTP ==>STOP_SIGNAL.
~~~
Support for Convex Unix is long gone, and nothing else overrides
STOP_SIGNAL. So just use SIGTSTP directly, removing a little
obfuscation.
(I don't really understand why we override [1] readline's SIGTSTP
handler (only) when reading scripts (and then fail to restore it
properly, assuming SIG_DFL...), but I'll leave that for another pass.
[1] - Actually, starting with readline 6.3, readline is no longer
installing its handlers while GDB is in control...)
gdb/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* event-top.c: Check SIGTSTP instead of STOP_SIGNAL thoughout.
(async_init_signals): Adjust.
(handle_stop_sig): Rename to ...
(handle_sigtstp): ... this.
(async_stop_sig): Rename to ...
(async_sigtstp_handler): ... this, and delete STOP_SIGNAL !=
SIGTSTP path.
* event-top.h: Move signal.h include to the top. Check SIGTSTP
instead of STOP_SIGNAL thoughout.
(handle_stop_sig): Rename to ...
(handle_sigtstp): ... this.
* top.c (command_line_input): Replace STOP_SIGNAL -> SIGTSTP.
I find this odd 'set flags twice' ancient code and comment annoyingly
distracting. It may well be that the reason for the double-set was
simply a copy/paste mistake, and that we've been doing this for
decades [1] for no good reason. Let's just get rid of it, and if we
find a real reason, add it back with a comment explaining why it's
necessary.
[1] This double-set was already in gdb 2.4 / 1988, the oldest release
we have sources for, and imported in git. From 'git show 7b4ac7e1ed
inflow.c':
+void
+terminal_inferior ()
+{
+ if (terminal_is_ours) /* && inferior_thisrun_terminal == 0) */
+ {
+ fcntl (0, F_SETFL, tflags_inferior);
+ fcntl (0, F_SETFL, tflags_inferior);
The "is there a reason" comment was added in 1993, by:
commit a88797b5ea
Author: Fred Fish <fnf@specifix.com>
AuthorDate: Thu Aug 5 01:33:45 1993 +0000
gdb/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* inflow.c (child_terminal_inferior, child_terminal_ours_1): No
longer set flags twice in row.
This commit garbage collects the termio and sgtty support.
GDB's terminal handling code still has support for the old termio and
sgtty interfaces in addition to termios. However, I think it's pretty
safe to assume that for a long, long time, Unix-like systems provide
termios. GNU/Linux, Solaris, Cygwin, AIX, DJGPP, macOS and the BSDs
all have had termios.h for many years. Looking around the web, I
found discussions about FreeBSD folks trying to get rid of old sgtty.h
a decade ago:
https://lists.freebsd.org/pipermail/freebsd-hackers/2007-March/019983.html
So I think support for termio and sgtty in GDB is just dead code that
is never compiled anywhere and is just getting in the way. For
example, serial_noflush_set_tty_state and the raw<->cooked concerns
mentioned in inflow.c only exist because of sgtty (see
hardwire_noflush_set_tty_state).
Regtested on GNU/Linux.
Confirmed that I can still build Solaris, DJGPP and AIX GDB and that
the resulting GDBs still include the termios.h-guarded code.
Confirmed mingw-w64 GDB still builds and skips the termios.h-guarded
code.
gdb/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* Makefile.in (SER_HARDWIRE): Update comment.
(HFILES_NO_SRCDIR): Remove gdb_termios.h.
* common/gdb_termios.h: Delete file.
* common/job-control.c: Include termios.h and unistd.h instead of
gdb_termios.h.
(gdb_setpgid): Remove HAVE_TERMIOS || TIOCGPGRP preprocessor
check.
(have_job_control): Check HAVE_TERMIOS_H instead of HAVE_TERMIOS.
Remove sgtty code.
* configure.ac: No longer check for termio.h and sgtty.h.
* configure: Regenerate.
* inflow.c: Include termios.h instead of gdb_termios.h. Replace
PROCESS_GROUP_TYPE checks with HAVE_TERMIOS_H checks throughout.
Replace PROCESS_GROUP_TYPE references with pid_t references
throughout.
(gdb_getpgrp): Delete.
(set_initial_gdb_ttystate): Use tcgetpgrp instead of gdb_getpgrp.
(child_terminal_inferior): Remove comment. Remove sgtty code.
(child_terminal_ours_1): Use tcgetpgrp directly instead of
gdb_getpgrp. Use serial_set_tty_state instead aof
serial_noflush_set_tty_state. Remove sgtty code.
* inflow.h: Include unistd.h instead of gdb_termios.h. Replace
PROCESS_GROUP_TYPE check with HAVE_TERMIOS_H check.
(inferior_process_group): Now returns pid_t.
* ser-base.c (ser_base_noflush_set_tty_state): Delete.
* ser-base.h (ser_base_noflush_set_tty_state): Delete.
* ser-event.c (serial_event_ops): Update.
* ser-go32.c (dos_noflush_set_tty_state): Delete.
(dos_ops): Update.
* ser-mingw.c (hardwire_ops, tty_ops, pipe_ops, tcp_ops): Update.
* ser-pipe.c (pipe_ops): Update.
* ser-tcp.c (tcp_ops): Update.
* ser-unix.c: Include termios.h instead of gdb_termios.h. Remove
HAVE_TERMIOS checks.
[HAVE_TERMIO] (struct hardwire_ttystate): Delete.
[HAVE_SGTTY] (struct hardwire_ttystate): Delete.
(get_tty_state, set_tty_state): Drop termio and sgtty code, and
assume termios.
(hardwire_noflush_set_tty_state): Delete.
(hardwire_print_tty_state, hardwire_drain_output)
(hardwire_flush_output, hardwire_flush_input)
(hardwire_send_break, hardwire_raw, hardwire_setbaudrate)
(hardwire_setstopbits, hardwire_setparity): Drop termio and sgtty
code, and assume termios.
(hardwire_ops): Update.
(_initialize_ser_hardwire): Remove HAVE_TERMIOS check.
* serial.c (serial_noflush_set_tty_state): Delete.
* serial.h (serial_noflush_set_tty_state): Delete.
(serial_ops::noflush_set_tty_state): Delete.
gdb/gdbserver/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* configure.ac: No longer check for termio.h and sgtty.h.
* configure: Regenerate.
* remote-utils.c: Include termios.h instead of gdb_termios.h.
(remote_open): Check HAVE_TERMIOS_H instead of HAVE_TERMIOS.
Remove termio and sgtty code.
Now that all target FP operations are performed via target-float.c,
this file remains the sole caller of functions in doublest.c and dfp.c.
Therefore, this patch merges the latter files into the former and
makes all their function static there.
gdb/ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* Makefile.in (SFILES): Remove doublest.c and dfp.c.
(HFILES_NO_SRCDIR): Remove doublest.h and dfp.h.
(COMMON_OBS): Remove doublest.o and dfp.o.
Do not build target-float.c (instead of doublest.c)
with -Wformat-nonliteral.
* doublest.c: Remove file.
* doublest.h: Remove file.
* dfp.c: Remove file.
* dfp.h: Remove file.
* target-float.c: Do not include "doublest.h" and "dfp.h".
(DOUBLEST): Move here from doublest.h.
(enum float_kind): Likewise.
(FLOATFORMAT_CHAR_BIT): Likewise.
(FLOATFORMAT_LARGEST_BYTES): Likewise.
(floatformat_totalsize_bytes): Move here from doublest.c. Make static.
(floatformat_precision): Likewise.
(floatformat_normalize_byteorder, get_field, put_field): Likewise.
(floatformat_is_negative, floatformat_classify, floatformat_mantissa):
Likewise.
(host_float_format, host_double_format, host_long_double_format):
Likewise.
(floatformat_to_string, floatformat_from_string): Likewise.
(floatformat_to_doublest): Likewise. Also, inline the original
convert_floatformat_to_doublest.
(floatformat_from_doublest): Likewise. Also, inline the original
convert_floatformat_from_doublest.
Include "dpd/decimal128.h", "dpd/decimal64.h", and "dpd/decimal32.h".
(MAX_DECIMAL_STRING): Move here from dfp.c.
(match_endianness): Likewise.
(set_decnumber_context, decimal_check_errors): Likewise.
(decimal_from_number, decimal_to_number): Likewise.
(decimal_to_string, decimal_from_string): Likewise. Make static.
(decimal_from_longest, decimal_from_ulongest): Likewise.
(decimal_to_longest): Likewise.
(decimal_binop, decimal_is_zero, decimal_compare): Likewise.
(decimal_convert): Likewise.
This patch removes the following routines, which now have no remaining
users in GDB:
- extract_typed_floating
- store_typed_floating
- convert_typed_floating
- decimal_from_doublest
- decimal_to_doublest
- value_as_double
- unpack_double
- value_from_double
- value_from_decfloat
This completes removal of DOUBLEST from all files except doublest.{c,h}
and target-float.c.
gdb/ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* doublest.c: Do not include "gdbtypes.h".
(extract_typed_floating): Remove.
(store_typed_floating): Remove.
(convert_typed_floating): Remove.
* doublest.h (struct type): Remove.
(DOUBLEST_PRINT_FORMAT): Remove.
(DOUBLEST_SCAN_FORMAT): Remove.
(extract_typed_floating): Remove.
(store_typed_floating): Remove.
(convert_typed_floating): Remove.
* dfp.c (decimal_from_doublest): Remove.
(decimal_to_doublest): Remove.
* dfp.h: Do not include "doublest.h".
(decimal_from_doublest): Remove.
(decimal_to_doublest): Remove.
* value.c: Do not include "doublest.h" and "dfp.h".
(value_as_double): Remove.
(unpack_double): Remove.
(value_from_double): Remove.
(value_from_decfloat): Remove.
* value.h: Do not include "doublest.h".
(value_as_double): Remove.
(unpack_double): Remove.
(value_from_double): Remove.
(value_from_decfloat): Remove.
This patch mechanically replaces convert_typed_floating with the
equivalent target_float_convert throughout tdep files, to prepare
for the removal of doublest.{c,h}.
No functional change intended.
gdb/ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* i386-tdep.c: Include "target-float.h". Do not include "doublest.h".
(i386_extract_return_value): Use target_float_convert.
(i386_store_return_value): Likewise.
* i387-tdep.c (i387_register_to_value): Use target_float_convert.
(i387_value_to_register): Likewise.
* ia64-tdep.c: Include "target-float.h". Do not include "doublest.h".
(ia64_register_to_value): Use target_float_convert.
(ia64_value_to_register): Likewise.
(ia64_extract_return_value): Likewise.
(ia64_store_return_value): Likewise.
(ia64_push_dummy_call): Likewise.
* m68k-tdep.c: Include "target-float.h".
(m68k_register_to_value): Use target_float_convert.
(m68k_value_to_register): Likewise.
(m68k_svr4_extract_return_value): Likewise.
(m68k_svr4_store_return_value): Likewise.
* ppc-sysv-tdep.c: Include "target-float.h".
(ppc_sysv_abi_push_dummy_call): Use target_float_convert.
(do_ppc_sysv_return_value): Likewise.
(ppc64_sysv_abi_push_freg): Likewise.
(ppc64_sysv_abi_return_value_base): Likewise.
* rs6000-aix-tdep.c: Include "target-float.h".
(rs6000_push_dummy_call): Use target_float_convert.
(rs6000_return_value): Likewise.
* rs6000-lynx178-tdep.c: Include "target-float.h".
(rs6000_lynx178_push_dummy_call): Use target_float_convert.
(rs6000_lynx178_return_value): Likewise.
* rs6000-tdep.c: Include "target-float.h". Do not include "doublest.h".
(rs6000_register_to_value): Use target_float_convert.
(rs6000_value_to_register): Likewise.
* arm-tdep.c: Include "target-float.h". Do not include "doublest.h".
(arm_extract_return_value): Use target_float_convert.
(arm_store_return_value): Likewise.
* sh-tdep.c: Include "target-float.h". Do not include "doublest.h".
(sh_register_convert_to_virtual): Use target_float_convert.
(sh_register_convert_to_raw): Likewise.
* sh64-tdep.c: Include "target-float.h".
(sh64_extract_return_value): Use target_float_convert.
(sh64_register_convert_to_virtual): Likewise.
(sh64_register_convert_to_raw): Likewise. Fix argument types.
The last remaing use for DOUBLEST is in the code that interfaces to the
scripting languages (Python and Guile). The problem here is that we
expose interfaces to convert a GDB value to and from native values of
floating-point type in those languages, and those by definition use
the host floating-point format.
While we cannot completely eliminate conversions to/from the host
floating-point format here, we still need to get rid of the uses
of value_as_double / value_from_double, since those will go away.
This patch implements two new target-float.c routine:
- target_float_to_host_double
- target_float_from_host_double
which convert to/from a host "double". Those should only ever be
used where a host "double" is mandated by an external interface.
gdb/ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* target-float.c (floatformat_to_host_double): New function.
(floatformat_from_host_double): Likewise.
(target_float_to_host_double): Likewise.
(target_float_from_host_double): Likewise.
* target-float.h (target_float_to_host_double): Add prototype.
(target_float_from_host_double): Likewise.
* guile/scm-value.c: Include "target-float.h".
(gdbscm_value_to_real): Use target_float_to_host_double.
Handle integer source values via value_as_long.
* guile/scm-math.c: Include "target-float.h". Do not include
"doublest.h", "dfp.h", and "expression.h".
(vlscm_convert_typed_number): Use target_float_from_host_double.
(vlscm_convert_number): Likewise.
* python/py-value.c (valpy_float): Use target_float_to_host_double.
(convert_value_from_python): Use target_float_from_host_double.
One of the few still remaining uses of DOUBLEST in GDB is the Ada front-end
code that handles scaling of Ada fixed-point types. The target format for
those types is some integer format; to convert those values to standard
floating-point representation, that integer needs to be multiplied by a
rational scale factor, given as a pair of numerator and denominator.
To avoid having to deal with long integer arithmetic, the current Ada
front-end code currently performs those scaling operations in host
DOUBLEST arithmetic. To eliminate this use of DOUBLEST, this patch
changes the front-end to instead perform those operations in the
*target* floating-point format (chosing to use the target "long double").
The implementation is mostly straight-forward, using value_cast and
value_binop to perform the target operations.
Scanning in the scale numerator and denominator is now done into
a host "long long" instead of a DOUBLEST, which should be large
enough to hold all possible values. (Otherwise, this can be replaced
by target-format target_float_from_string operations as well.)
Printing fixed-point types and values should be completely unchanges,
using target_float_to_string with the same format strings as current code.
gdb/ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* ada-lang.c (cast_to_fixed): Reimplement in target arithmetic.
(cast_from_fixed): Likewise.
(ada_scaling_type): New function.
(ada_delta): Return value instead of DOUBLEST. Perform target
arithmetic instead of host arithmetic.
(scaling_factor): Rename to ...
(ada_scaling_factor) ... this. Make non-static. Return value instead
of DOUBLEST. Perform target arithmetic instead of host arithmetic.
(ada_fixed_to_float): Remove.
(ada_float_to_fixed): Remove.
* ada-lang.h (ada_fixed_to_float): Remove.
(ada_float_to_fixed): Remove.
(ada_delta): Return value instead of DOUBLEST.
(ada_scaling_factor): Add prototype.
* ada-typeprint.c: Include "target-float.h".
(print_fixed_point_type): Perform target arithmetic instead of
host arithmetic.
* ada-valprint.c: Include "target-float.h".
(ada_val_print_num): Perform target arithmetic instead of
host arithmetic for fixed-point types.
This patch adds the following target floating-point routines:
- target_float_binop
- target_float_compare
which call the equivalent decimal_ routines to handle decimal FP,
and call helper routines that currently still go via DOUBLEST to
handle binary FP (derived from current valarith.c code).
These routines are used to handle both binary and decimal FP types
in scalar_binop, value_equal, and value_less, mostly following the
method currently used for decimal FP. The existing value_args_as_decimal
helper is renamed to value_args_as_target_float and extended to handle
both binary and decimal types.
The unary operations value_pos and value_neg are also simplified,
the former by using a simple copy for all scalar types, the latter
by using value_binop (... BINOP_SUB) to implement negation as
subtraction from zero.
ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* target-float.c: Include <math.h>.
(floatformat_binop): New function.
(floatformat_compare): Likewise.
(target_float_binop): Likewise.
(target_float_compare): Likewise.
* target-float.h: Include "expression.h".
(target_float_binop): Add prototype.
(target_float_compare): Likewise.
* valarith.c: Do not include "doublest.h" and "dfp.h".
Include "common/byte-vector.h".
(value_args_as_decimal): Remove, replace by ...
(value_args_as_target_float): ... this function. Handle both
binary and decimal target floating-point formats.
(scalar_binop): Handle both binary and decimal FP using
value_args_as_target_float and target_float_binop.
(value_equal): Handle both binary and decimal FP using
value_args_as_target_float and target_float_compare.
(value_less): Likewise.
(value_pos): Handle all scalar types as simple copy.
(value_neg): Handle all scalar types via BINOP_SUB from 0.
* dfp.c (decimal_binop): Throw error instead of internal_error
when called with an unsupported operation code.
This patch adds the following conversion routines:
- target_float_to_longest
- target_float_from_longest
- target_float_from_ulongest
- target_float_convert
which call the equivalent decimal_ routines to handle decimal FP,
and call helper routines that currently still go via DOUBLEST to
handle binary FP.
The target_float_convert routine not only handles BFP<->BFP and
DFP<->DFP conversions, but also BFP<->DFP, which are implemented
by converting to a string and back.
These helpers are used in particular to implement conversion
from and to FP in value_cast, without going through DOUBLEST there.
In order to implement this for the FP<-integer case, the
pack_long / pack_unsigned_long routines are extended to support
floating-point values as output (thereby allowing use of
value_from_[u]longest with a floating-point target type).
This latter change also allows simplification of value_one.
gdb/ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* target-float.c (floatformat_to_longest): New function.
(floatformat_from_longest, floatformat_from_ulongest): Likewise.
(floatformat_convert): Likewise.
(target_float_to_longest): Likewise.
(target_float_from_longest, target_float_from_ulongest): Likewise.
(target_float_convert): Likewise.
* target-float.h (target_float_to_longest): Add prototype.
(target_float_from_longest, target_float_from_ulongest): Likewise.
(target_float_convert): Likewise.
* value.c (unpack_long): Use target_float_to_longest.
(pack_long): Allow FP types. Use target_float_from_longest.
(pack_unsigned_long): Likewise using target_float_from_ulongest.
* valops.c: Include "target-float.h". Do not include "dfp.h".
(value_cast): Handle conversions to FP using target_float_convert,
value_from_ulongest, and value_from_longest.
(value_one): Use value_from_longest for FP types as well.
This adds target_float_to_string and target_float_from_string,
which dispatch to the corresponding floatformat_ or decimal_ routines.
Existing users of those routines are changed to use the new
target-float routines instead (most of those places already handle
both binary and decimal FP).
In addition, two other places are changes to use target_float_from_string:
- define_symbol in stabsread.c, when parsing a floating-point literal
from stabs debug info
- gdbarch-selftest.c when initializing a target format values (to
eliminate use of DOUBLEST there).
gdb/ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* target-float.c (target_float_to_string): New function.
(target_float_from_string): New function.
* target-float.h (target_float_to_string): Add prototype.
(target_float_from_string): Add prototype.
* valprint.c: Include "target-float.h". Do not include
"doublest.h" and "dfp.h".
(print_floating): Use target_float_to_string.
* printcmd.c: Include "target-float.h". Do not include "dfp.h".
(printf_floating): Use target_float_to_string.
* i387-tdep.c: Include "target-float.h". Do not include "doublest.h".
(print_i387_value): Use target_float_to_string.
* mips-tdep.c: Include "target-float.h".
(mips_print_fp_register): Use target_float_to_string.
* sh64-tdep.c: Include "target-float.h".
(sh64_do_fp_register): Use target_float_to_string.
* parse.c: Include "target-float.h". Do not include
"doublest.h" and "dfp.h".
(parse_float): Use target_float_from_string.
* stabsread.c: Include "target-float.h". Do not include "doublest.h".
(define_symbol): Use target_float_from_string.
* gdbarch-selftests.c: Include "target-float.h".
(register_to_value_test): Use target_float_from_string.
This patch introduces the new set of target floating-point handling routines
in target-float.{c,h}. In the end, the intention is that this file will
contain support for all operations in target FP format, fully replacing
both the current doublest.{c,h} and dfp.{c,h}.
To begin with, this patch only adds a target_float_is_zero routine,
which handles the equivalent of decimal_is_zero for both binary and
decimal FP. For the binary case, to avoid conversion to DOUBLEST,
this is implemented using the floatformat_classify routine.
However, it turns out that floatformat_classify actually has a bug
(it was not used to check for zero before), so this is fixed as well.
The new routine is used in both value_logical_not and valpy_nonzero.
There is one extra twist: the code previously used value_as_double
to convert to DOUBLEST and then compare against zero. That routine
performs an extra task: it detects invalid floating-point values
and raises an error. In any place where value_as_double is removed
in favor of some target-float.c routine, we need to replace that check.
To keep this check centralized in one place, I've added a new routine
is_floating_value, which returns a boolean determining whether a
value's type is floating point (binary or decimal), and if so, also
performs the validity check. Since we need to check whether a value
is FP before calling any of the target-float routines anyway, this
seems a good place to add the check without much code size overhead.
In some places where we only want to check for floating-point types
and not perform a validity check (e.g. for the *output* of an operation),
we can use the new is_floating_type routine (in gdbarch) instead.
The validity check itself is done by a new target_float_is_valid
routine in target-float, encapsulating floatformat_is_valid.
ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* Makefile.c (SFILES): Add target-float.c.
(HFILES_NO_SRCDIR): Add target-float.h.
(COMMON_OBS): Add target-float.o.
* target-float.h: New file.
* target-float.c: New file.
* doublest.c (floatformat_classify): Fix detection of float_zero.
* gdbtypes.c (is_floating_type): New function.
* gdbtypes.h (is_floating_type): Add prototype.
* value.c: Do not include "floatformat.h".
(unpack_double): Use target_float_is_valid.
(is_floating_value): New function.
* value.h (is_floating_value): Add prototype-
* valarith.c: Include "target-float.h".
(value_logical_not): Use target_float_is_zero.
* python/py-value.c: Include "target-float.h".
(valpy_nonzero): Use target_float_is_zero.
While an abort after storing out of bounds by one to an array in our
caller is probably OK in practice, it's better to check before storing.
PR 22397
* bfd.c (_bfd_doprnt_scan): Check args index before storing, not
after.
This adds positional parameter support to the bfd error handler,
something that was lost 2017-04-13 when _doprnt was added with commit
c08bb8dd. The number of format args is now limited to 9, which is
sufficient for current _bfd_error_handler messages. If someone
exceeds 9 args they get the joy of modifying this code to support more
args (shouldn't be too difficult).
PR 22397
* bfd.c (union _bfd_doprnt_args): New.
(PRINT_TYPE): Add FIELD arg. Take value from args.
(_bfd_doprnt): Replace ap parameter with args. Adjust all
PRINT_TYPE invocations and reading of format args to suit.
Move "%%" handling out of switch handling args. Support
positional parameters.
(_bfd_doprnt_scan): New function.
(error_handler_internal): Call _bfd_doprnt_scan and read args.
This patch removes unnecessary GOT IE TLS relocations in PIEs. Useful
with --no-tls-optimize, or with an enormous TLS segment. With the
default --tls-optimize in effect IE code sequences will be edited to
LE under the same circumstances we can remove the GOT reloc.
* elf32-ppc.c (got_entries_needed, got_relocs_needed): New functions.
(allocate_dynrelocs, ppc_elf_size_dynamic_sections): Use them here.
(ppc_elf_relocate_section): Don't output a dynamic relocation
for IE GOT entries in an executable.
* elf64-ppc.c (allocate_got): Trim unnecessary TPREL relocs.
(ppc64_elf_size_dynamic_sections): Likewise.
(ppc64_elf_relocate_section): Likewise.
PowerPC64 lacked the mapfile textrel warning on finding dynamic relocs
in read-only sections. This patch adds it, and tidies the
readonly_dynrelocs interface. PowerPC doesn't need a SEC_ALLOC test
because !SEC_ALLOC sections are excluded by check_relocs so will never
have dyn_relocs.
* elf32-ppc.c (readonly_dynrelocs): Delete info param. Update all
callers. Don't bother with SEC_ALLOC test. Return section pointer.
Move minfo call to..
(maybe_set_textrel): ..here.
* elf64-ppc.c (readonly_dynrelocs): Return section pointer.
(maybe_set_textrel): Call minfo to print textrel warning to map file.
This patch fixes various problems with TLS relocations.
1) Report an error if a symbol has both TLS and normal GOT entries.
2) The GOT entry size calculation was obscure and made use of the fact
that a symbol shouldn't have both normal and TLS GOT entries.
3) The second word of a GD GOT entry sometimes omitted a dynamic
reloc, which was fine except that doing so makes it impossible for
ld.so to differentiate GD and LD entries. Also, a NONE reloc was
emitted.
4) Unnecessary relocs were emitted for GOT entries.
5) GOT relocs didn't take note of UNDEFWEAK_NO_DYNAMIC_RELOC.
* elf32-hppa.c (enum _tls_type): Move.
(struct elf32_hppa_link_hash_entry): Make tls_type a bitfield.
(elf32_hppa_check_relocs): Set DF_STATIC_TLS only for shared libraries.
Tidy tls_type handling. Set symbol tls_type for GOT_TLS_LDM too.
(got_entries_needed, got_relocs_needed): New functions.
(allocate_dynrelocs): Use them.
(elf32_hppa_size_dynamic_sections): Likewise.
(elf32_hppa_relocate_section): Delete bogus FIXME. Formatting.
Correct code emitting relocs on GD/IE got entries. Report an
error when a symbol has both normal and TLS GOT relocs.
gcc -mfast-indirect-calls emits a function pointer initialization
without a P% (plabel) modifier. ld does not create the necessary
dynamic relocations for this to work. It turns out that the problem
is caused by the non_got_ref symbol flag. This flag is set for
non-pic by check_relocs to indicate that the symbol might need copy
relocations or dynamic relocations. Later, the backend
adjust_dynamic_symbol clears the flag to indicate dynamic relocations
are needed, but leaves it set when copy relocations were created. The
inversion in meaning is insane, but it's that way because the backend
adjust_dynamic_symbol function doesn't get to look at all symbols..
Anyway, the insanity works for non-function symbols. However, the
flag is left set on any function symbol with a dynamic relocation.
This patch fixes the non_got_ref handling for function symbols, adds
-z nocopyreloc for hppa-elf, reports where textrel occurs, and expands
comments. The check_relocs change just stops creation of dyn_relocs
we always threw away later.
PR 22394
* elf32-hppa.c (elf32_hppa_check_relocs): Don't create dyn_relocs
for plabels when non-pic.
(maybe_set_textrel): New function.
(readonly_dynrelocs): Move and rewrite.
(elf32_hppa_adjust_dynamic_symbol): Use it. Don't create copy
relocs when def_regular or -z nocopyreloc. Handle non_got_ref
for functions. Expand non_got_ref comments.
(elf32_hppa_size_dynamic_sections): Use maybe_set_textrel.
This changes h8300-tdep.c to use std::vector, allowing the removal of
a cleanup.
gdb/ChangeLog
2017-11-04 Tom Tromey <tom@tromey.com>
* h8300-tdep.c (h8300_push_dummy_call): Use std::vector.
This introduces gdb_breakpoint_up, a unique_ptr typedef that owns a
breakpoint. It then changes set_momentary_breakpoint to return a
gdb_breakpoint_up and fixes up the fallout. This then allows the
removal of make_cleanup_delete_breakpoint.
Once breakpoints are fully C++-ified, this typedef can be removed in
favor of a plain std::unique_ptr.
gdb/ChangeLog
2017-11-04 Tom Tromey <tom@tromey.com>
* breakpoint.c (set_momentary_breakpoint): Return
breakpoint_up.
(until_break_command): Update.
(new_until_break_fsm): Change argument types to
breakpoint_up.
(set_momentary_breakpoint_at_pc): Return breakpoint_up.
(do_delete_breakpoint_cleanup, make_cleanup_delete_breakpoint):
Remove.
* infcmd.c (finish_forward): Update.
* breakpoint.h (set_momentary_breakpoint)
(set_momentary_breakpoint_at_pc): Return breakpoint_up.
(make_cleanup_delete_breakpoint): Remove.
(struct breakpoint_deleter): New.
(breakpoint_up): New typedef.
* infrun.c (insert_step_resume_breakpoint_at_sal_1): Update.
(insert_exception_resume_breakpoint): Update.
(insert_exception_resume_from_probe): Update.
(insert_longjmp_resume_breakpoint): Update.
* arm-linux-tdep.c (arm_linux_copy_svc): Update.
* elfread.c (elf_gnu_ifunc_resolver_stop): Update.
* infcall.c (call_function_by_hand_dummy): Update
This changes c_type_print_base to use unique_xmalloc_ptr, removing a
cleanup.
gdb/ChangeLog
2017-11-04 Tom Tromey <tom@tromey.com>
* c-typeprint.c (c_type_print_base): Use gdb::unique_xmalloc_ptr.
This removes some cleanups from linux-tdep.c, replacing them with
def_vector or byte_vector as appropriate.
gdb/ChangeLog
2017-11-04 Tom Tromey <tom@tromey.com>
* linux-tdep.c (linux_core_info_proc_mappings): Use
gdb::def_vector.
(linux_get_siginfo_data): Return gdb::byte_vector. Remove
"size" argument.
(linux_corefile_thread): Update.
(linux_make_corefile_notes): Remove unused variable.
This removes a cleanup from ppc-linux-tdep.c, replacing it with
gdb::byte_vector.
gdb/ChangeLog
2017-11-04 Tom Tromey <tom@tromey.com>
* ppc-linux-tdep.c (ppc_linux_get_syscall_number): Use
gdb::byte_vector.
