(output_cie, output_fde): Use it.
(DWARF2_EH_FRAME_READ_ONLY): New.
(cfi_finish): Use it.
* config/tc-hppa.h (DWARF2_FDE_RELOC_SIZE): Set to 8 for 64-bit.
(DWARF2_CIE_DATA_ALIGNMENT): Change sign.
(DWARF2_EH_FRAME_READ_ONLY): New.
* config/tc-hppa.c (tc_gen_reloc): Generate pc-relative relocations
from the results of DIFF_EXPR_OK manipulation.
bfd/
* archures.c (bfd_mach_avr25, bfd_mach_avr31, bfd_mach_avr35,
bfd_mach_avr51): New.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): Add avr25, avr31, avr35, and avr51
architectures. Change comments to match architecture comments in GCC.
(compatible): Add test for new AVR architectures.
* elf32-avr.c (bfd_elf_avr_final_write_processing): Recognize
bfd_mach_avr25, bfd_mach_avr31, bfd_mach_avr35 and bfd_mach_avr51.
(elf32_avr_object_p): Recognize E_AVR_MACH_AVR25, E_AVR_MACH_AVR31,
E_AVR_MACH_AVR35 and E_AVR_MACH_AVR51.
gas/
* config/tc-avr.c (mcu_types): Add avr25, avr31, avr35, and avr51
architectures. Reorganize list to put mcu types in correct architectures
and to order list same as in GCC. Use new ISA definitions in
include/opcode/avr.h.
* doc/c-avr.texi: Add avr25, avr31, avr35, and avr51 architecture
descriptions. Reorganize descriptions to put mcu types in correct
architectures and to order lists same as in GCC.
include/
* elf/avr.h (E_AVR_MACH_AVR25, E_AVR_MACH_AVR31,
E_AVR_MACH_AVR35, E_AVR_MACH_AVR51): Define.
(EF_AVR_MACH): Redefine to 0x7F.
* opcode/avr.h (AVR_ISA_TINY3, AVR_ISA_ALL, AVR_ISA_USB162): Remove.
(AVR_ISA_AVR3): Redefine.
(AVR_ISA_AVR1, AVR_ISA_AVR2, AVR_ISA_AVR31, AVR_ISA_AVR35,
AVR_ISA_AVR3_ALL, AVR_ISA_AVR4, AVR_ISA_AVR5, AVR_ISA_AVR51,
AVR_ISA_AVR6): Define.
ld/
* Makefile.am (ALL_EMULATIONS): Add eavr25.o, eavr31.o, eavr35.o,
and eavr51.o.
Add rules for eavr25.c, eavr31.c, eavr35.c, eavr51.c.
* Makefile.in: Regenerate.
* configure.tgt (avr-*-*, targ_extra_emuls): Add avr25, avr31, avr35
and avr51.
* emulparams/avr25.sh: New file.
* emulparams/avr31.sh: New file.
* emulparams/avr35.sh: New file.
* emulparams/avr51.sh: New file.
Daniel Jacobowitz <dan@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
Mark Shinwell <shinwell@codesourcery.com>
Maxim Kuvyrkov <maxim@codesourcery.com>
* elf32-mips.c (mips_vxworks_copy_howto_rela): Replace with...
(elf_mips_copy_howto): ...this howto. Clear the size fields.
(mips_vxworks_jump_slot_howto_rela): Replace with...
(elf_mips_jump_slot_howto): ...this howto.
(bfd_elf32_bfd_reloc_type_lookup): Handle BFD_RELOC_MIPS_COPY
and BFD_RELOC_MIPS_JUMP_SLOT.
(bfd_elf32_bfd_reloc_name_lookup): Handle "R_MIPS_COPY" and
"R_MIPS_JUMP_SLOT".
(mips_elf32_rtype_to_howto): Handle R_MIPS_COPY and R_MIPS_JUMP_SLOT.
(elf_backend_plt_readonly): Define.
(elf_backend_plt_sym_val): Define for non-VxWorks targets.
(mips_vxworks_bfd_reloc_type_lookup): Delete.
(mips_vxworks_bfd_reloc_name_lookup): Likewise.
(mips_vxworks_rtype_to_howto): Likewise.
(elf_backend_want_dynbss): Don't define for VxWorks.
(elf_backend_plt_readonly): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Likewise.
(bfd_elf32_bfd_reloc_name_lookup): Likewise.
(elf_backend_mips_rtype_to_howto): Likewise.
(elf_backend_adjust_dynamic_symbol): Likewise.
(elf_backend_got_symbol_offset): Don't define.
* elfn32-mips.c (elf_mips_copy_howto, elf_mips_jump_slot_howto): New.
(bfd_elf32_bfd_reloc_type_lookup): Handle BFD_RELOC_MIPS_COPY
and BFD_RELOC_MIPS_JUMP_SLOT.
(bfd_elf32_bfd_reloc_name_lookup): Handle "R_MIPS_COPY" and
"R_MIPS_JUMP_SLOT".
(mips_elf32_n32_rtype_to_howto): Handle R_MIPS_COPY and
R_MIPS_JUMP_SLOT.
(elf_backend_rela_plts_and_copies_p, elf_backend_plt_readonly)
(elf_backend_plt_sym_val): Define.
* elf64-mips.c (elf_mips_copy_howto, elf_mips_jump_slot_howto): New.
(bfd_elf64_bfd_reloc_type_lookup): Handle BFD_RELOC_MIPS_COPY
and BFD_RELOC_MIPS_JUMP_SLOT.
(bfd_elf64_bfd_reloc_name_lookup): Handle "R_MIPS_COPY" and
"R_MIPS_JUMP_SLOT".
(mips_elf64_rtype_to_howto): Handle R_MIPS_COPY and R_MIPS_JUMP_SLOT.
(elf_backend_rela_plts_and_copies_p, elf_backend_plt_readonly)
(elf_backend_plt_sym_val): Define.
* elfxx-mips.h (_bfd_mips_vxworks_adjust_dynamic_symbol): Delete.
(_bfd_mips_elf_use_plts_and_copy_relocs, _bfd_mips_elf_init_stubs)
(_bfd_mips_elf_plt_sym_val, _bfd_mips_post_process_headers): Declare.
* elfxx-mips.c (mips_elf_la25_stub): New structure.
(LA25_LUI, LA25_J, LA25_ADDIU): New macros.
(mips_elf_link_hash_entry): Add "la25_stubs", "has_static_relocs"
and "has_nonpic_branches" fields. Remove "is_relocation_target" and
"is_branch_target".
(mips_elf_link_hash_table): Add blank lines. Add
"use_plts_and_copy_relocs", "reserved_gotno", "strampoline",
"la25_stubs" and "add_stub_section" fields.
(mips_htab_traverse_info): New structure.
(PIC_OBJECT_P, MIPS_ELF_LOAD_WORD): New macros.
(MIPS_RESERVED_GOTNO): Delete.
(mips_o32_exec_plt0_entry, mips_n32_exec_plt0_entry)
(mips_n64_exec_plt0_entry, mips_exec_plt_entry): New tables.
(mips_elf_link_hash_newfunc): Update after the changes to
mips_elf_link_hash_entry.
(mips_elf_check_mips16_stubs): Replace the DATA parameter with
an INFO parameter. Don't look through warnings symbols here;
do it in mips_elf_check_symbols instead.
(mips_elf_create_stub_symbol): New function.
(mips_elf_la25_stub_hash, mips_elf_la25_stub_eq): New functions.
(_bfd_mips_elf_init_stubs, mips_elf_local_pic_function_p): Likewise.
(mips_elf_add_la25_intro, mips_elf_add_la25_trampoline): Likewise.
(mips_elf_add_la25_stub, mips_elf_check_symbols): New functions.
(mips_elf_gotplt_index): Check for VxWorks.
(mips_elf_output_dynamic_relocation): Take the relocation index
as an extra parameter. Do not increment reloc_count here.
(mips_elf_initialize_tls_slots): Update the calls to
mips_elf_output_dynamic_relocation accordingly.
(mips_elf_multi_got): Use htab->reserved_gotno instead of
MIPS_RESERVED_GOTNO.
(mips_elf_create_got_section): Don't allocate reserved GOT
entries here. Unconditionally create .got.plt, but don't
set its alignment here.
(mips_elf_relocation_needs_la25_stub): New function.
(mips_elf_calculate_relocation): Redirect branches and jumps to
a non-PIC stub if one exists. Check !h->has_static_relocs instead
of !htab->is_vxworks when deciding whether to create dynamic
relocations for R_MIPS_32, R_MIPS_REL32 and R_MIPS_64.
(_bfd_mips_elf_create_dynamic_sections): Unconditionally call
_bfd_elf_create_dynamic_sections. Unconditionally set up
htab->splt and htab->sdynbss. Set htab->srelplt to ".rel.plt"
if !htab->is_vxworks. Add non-VxWorks values of
htab->plt_header_size and htab->plt_entry_size.
(_bfd_mips_elf_check_relocs): Set pointer_equality_needed for
non-branch static relocations. Set has_nonpic_branches when an la25
stub might be required. Set can_make_dynamic_p to TRUE if R_MIPS_32,
R_MIPS_REL32 and R_MIPS_64 relocations can be made dynamic,
rather than duplicating the condition. Do not make them dynamic
for read-only sections in non-PIC executable objects.
Do not protect this code with dynobj == NULL || htab->sgot == NULL;
handle each group of cases separately. Add a default case that
sets has_static_relocs for non-GOT relocations that cannot be
made dynamic. Don't set is_relocation_target and is_branch_target.
Reject non-PIC static relocations in shared objects.
(_bfd_mips_vxworks_adjust_dynamic_symbol): Fold into...
(_bfd_mips_elf_adjust_dynamic_symbol): ...here, using
htab->use_plts_and_copy_relocs instead of htab->is_vxworks
to select PLT and copy-reloc handling. Set the alignment of
.plt and .got.plt when allocating the first entry. Generalize
code to handle REL as well as RELA sections and 64-bit as well as
32-bit GOT entries. Complain if we find a static-only reloc
against an externally-defined symbol and if we cannot create
dynamic relocations for it. Allocate copy relocs using
mips_elf_allocate_dynamic_relocations on non-VxWorks targets.
Set possibly_dynamic_relocs to 0 when using PLTs or copy relocs.
Skip reserved .got.plt entries.
(_bfd_mips_elf_always_size_sections): Use mips_elf_check_symbols
instead of mips_elf_check_mips16_stubs to process each symbol.
Do the traversal for relocatable objects too.
(mips_elf_lay_out_got): Use htab->reserved_gotno instead of
MIPS_RESERVED_GOTNO.
(_bfd_mips_elf_size_dynamic_sections): Exclude sdynbss if it
is empty. Extend the DT_PLTREL, DT_JMPREL and DT_PLTRELSZ handling
to non-VxWorks targets. Only add DT_REL{,A}, DT_REL{,A}SZ and
DT_REL{,A}ENT if .rel.dyn is nonempty. Create a symbol for the
PLT. Allocate a nop at the end of the PLT. Allocate DT_MIPS_PLTGOT.
(mips_elf_create_la25_stub_info): New function.
(_bfd_mips_elf_finish_dynamic_symbol): Write out PLT entries
and copy relocs where necessary. Check pointer_equality_needed.
(mips_finish_exec_plt): New function.
(_bfd_mips_elf_finish_dynamic_sections): Always set DT_PLTGOT
to the beginning of htab->sgot. Use htab->reserved_gotno instead
of MIPS_RESERVED_GOTNO. Assert htab->use_plts_and_copy_relocs
instead of htab->is_vxworks for DT_PLTREL, DT_PLTRELSZ and DT_JMPREL.
Set DT_PLTREL to DT_REL instead of DT_RELA on non-VxWorks targets.
Use mips_finish_exec_plt to create non-VxWorks PLT headers. Set
DT_MIPS_PLTGOT.
(_bfd_mips_elf_copy_indirect_symbol): Copy has_static_relocs
from the indirect symbol to the direct symbol. Also copy
has_nonpic_branches for indirect symbols.
(_bfd_mips_elf_get_target_dtag): Handle DT_MIPS_PLTGOT and
DT_MIPS_RWPLT.
(_bfd_mips_elf_link_hash_table_create): Initialize the new
mips_elf_link_hash_table fields.
(_bfd_mips_vxworks_link_hash_table_create): Set
use_plts_and_copy_relocs to TRUE. Use TRUE rather than 1
when setting is_vxworks.
(_bfd_mips_elf_use_plts_and_copy_relocs): New function.
(_bfd_mips_elf_final_link): Call mips_elf_create_la25_stub for
each la25_stub.
(_bfd_mips_elf_merge_private_bfd_data): Treat dynamic objects
as PIC. Generalize message about linking PIC and non-PIC.
(_bfd_mips_elf_plt_sym_val, _bfd_mips_post_process_headers): New
functions.
* reloc.c: Update comment near BFD_RELOC_MIPS_JUMP_SLOT.
* bfd-in2.h: Regenerated.
2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
Daniel Jacobowitz <dan@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
Mark Shinwell <shinwell@codesourcery.com>
* readelf.c (get_mips_symbol_other): Handle STO_MIPS_PLT and
STO_MIPS_PIC.
(slurp_rela_relocs, slurp_rel_relocs): Handle MIPS ELF64 here.
(dump_relocations, debug_apply_relocations): Don't handle it here.
(get_mips_dynamic_type): Handle DT_MIPS_PLTGOT and DT_MIPS_RWPLT.
(print_mips_pltgot_entry): New function.
(process_mips_specific): Dump the PLT GOT.
2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
Daniel Jacobowitz <dan@codesourcery.com>
* config/tc-mips.c (OPTION_CALL_NONPIC): New macro.
(OPTION_NON_SHARED, OPTION_XGOT, OPTION_MABI, OPTION_32)
(OPTION_N32, OPTION_64, OPTION_MDEBUG, OPTION_NO_MDEBUG)
(OPTION_PDR, OPTION_NO_PDR, OPTION_MVXWORKS_PIC): Bump by 1.
(md_longopts): Add -call_nonpic.
(md_parse_option): Handle OPTION_CALL_NONPIC.
(md_show_usage): Add -call_nonpic.
2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
* gas/mips/call-nonpic-1.s, gas/mips/call-nonpic-1.d: New test.
* gas/mips/mips.exp: Run it.
2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
Daniel Jacobowitz <dan@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
Mark Shinwell <shinwell@codesourcery.com>
* mips.h (STO_MIPS_PLT, ELF_ST_IS_MIPS_PLT, ELF_ST_SET_MIPS_PLT)
(STO_MIPS_PIC, DT_MIPS_PLTGOT, DT_MIPS_RWPLT): New macros.
2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
Daniel Jacobowitz <dan@codesourcery.com>
* emulparams/elf32bmip.sh (GOT): Define, moving .got.plt to...
(OTHER_RELRO_SECTIONS, OTHER_READWRITE_SECTIONS): ...one of these
two variables.
* emulparams/elf32bmipn32-defs.sh: Likewise.
* emultempl/mipself.em: Include ldctor.h, elf/mips.h and elfxx-mips.h.
(is_mips_elf): New macro.
(stub_file, stub_bfd): New variables.
(hook_stub_info): New structure.
(hook_in_stub): New function.
(mips_add_stub_section): Likewise.
(mips_create_output_section_statements): Likewise.
(mips_before_allocation): Likewise.
(real_func): New variable.
(mips_for_each_input_file_wrapper): New function.
(mips_lang_for_each_input_file): Likewise.
(lang_for_each_input_file): Define.
(LDEMUL_BEFORE_ALLOCATION): Likewise.
(LDEMUL_CREATE_OUTPUT_SECTION_STATEMENTS): Likewise.
2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
Daniel Jacobowitz <dan@codesourcery.com>
* ld-mips-elf/mips16-pic-3a.s,
ld-mips-elf/mips16-pic-3b.s,
ld-mips-elf/mips16-pic-3.dd,
ld-mips-elf/mips16-pic-3.gd,
ld-mips-elf/mips16-pic-3.rd,
ld-mips-elf/mips16-pic-3.inc,
ld-mips-elf/pic-and-nonpic-1a.s,
ld-mips-elf/pic-and-nonpic-1b.s,
ld-mips-elf/pic-and-nonpic-1.ld,
ld-mips-elf/pic-and-nonpic-1.dd,
ld-mips-elf/pic-and-nonpic-1.nd,
ld-mips-elf/pic-and-nonpic-1-rel.dd,
ld-mips-elf/pic-and-nonpic-1-rel.nd,
ld-mips-elf/pic-and-nonpic-2a.s,
ld-mips-elf/pic-and-nonpic-2b.s,
ld-mips-elf/pic-and-nonpic-2.d,
ld-mips-elf/pic-and-nonpic-3a.s,
ld-mips-elf/pic-and-nonpic-3a.ld,
ld-mips-elf/pic-and-nonpic-3a.dd,
ld-mips-elf/pic-and-nonpic-3a.gd,
ld-mips-elf/pic-and-nonpic-3a.sd,
ld-mips-elf/pic-and-nonpic-3b.s,
ld-mips-elf/pic-and-nonpic-3b.ld,
ld-mips-elf/pic-and-nonpic-3b.ad,
ld-mips-elf/pic-and-nonpic-3b.dd,
ld-mips-elf/pic-and-nonpic-3b.gd,
ld-mips-elf/pic-and-nonpic-3b.nd,
ld-mips-elf/pic-and-nonpic-3b.pd,
ld-mips-elf/pic-and-nonpic-3b.rd,
ld-mips-elf/pic-and-nonpic-3b.sd,
ld-mips-elf/pic-and-nonpic-3-error.d,
ld-mips-elf/pic-and-nonpic-4a.s,
ld-mips-elf/pic-and-nonpic-4b.s,
ld-mips-elf/pic-and-nonpic-4b.ld,
ld-mips-elf/pic-and-nonpic-4b.ad,
ld-mips-elf/pic-and-nonpic-4b.dd,
ld-mips-elf/pic-and-nonpic-4b.gd,
ld-mips-elf/pic-and-nonpic-4b.nd,
ld-mips-elf/pic-and-nonpic-4b.rd,
ld-mips-elf/pic-and-nonpic-4b.sd,
ld-mips-elf/pic-and-nonpic-4-error.d,
ld-mips-elf/pic-and-nonpic-5a.s,
ld-mips-elf/pic-and-nonpic-5b.s,
ld-mips-elf/pic-and-nonpic-5b.ld,
ld-mips-elf/pic-and-nonpic-5b.ad,
ld-mips-elf/pic-and-nonpic-5b.dd,
ld-mips-elf/pic-and-nonpic-5b.gd,
ld-mips-elf/pic-and-nonpic-5b.nd,
ld-mips-elf/pic-and-nonpic-5b.rd,
ld-mips-elf/pic-and-nonpic-5b.sd,
ld-mips-elf/pic-and-nonpic-5b.pd,
ld-mips-elf/pic-and-nonpic-6.ld,
ld-mips-elf/pic-and-nonpic-6-o32a.s,
ld-mips-elf/pic-and-nonpic-6-o32b.s,
ld-mips-elf/pic-and-nonpic-6-o32c.s,
ld-mips-elf/pic-and-nonpic-6-o32.ad,
ld-mips-elf/pic-and-nonpic-6-o32.dd,
ld-mips-elf/pic-and-nonpic-6-o32.gd,
ld-mips-elf/pic-and-nonpic-6-o32.nd,
ld-mips-elf/pic-and-nonpic-6-o32.pd,
ld-mips-elf/pic-and-nonpic-6-o32.rd,
ld-mips-elf/pic-and-nonpic-6-o32.sd,
ld-mips-elf/pic-and-nonpic-6-n32a.s,
ld-mips-elf/pic-and-nonpic-6-n32b.s,
ld-mips-elf/pic-and-nonpic-6-n32c.s,
ld-mips-elf/pic-and-nonpic-6-n32.ad,
ld-mips-elf/pic-and-nonpic-6-n32.dd,
ld-mips-elf/pic-and-nonpic-6-n32.gd,
ld-mips-elf/pic-and-nonpic-6-n32.nd,
ld-mips-elf/pic-and-nonpic-6-n32.pd,
ld-mips-elf/pic-and-nonpic-6-n32.rd,
ld-mips-elf/pic-and-nonpic-6-n32.sd,
ld-mips-elf/pic-and-nonpic-6-n64a.s,
ld-mips-elf/pic-and-nonpic-6-n64b.s,
ld-mips-elf/pic-and-nonpic-6-n64c.s,
ld-mips-elf/pic-and-nonpic-6-n64.ad,
ld-mips-elf/pic-and-nonpic-6-n64.dd,
ld-mips-elf/pic-and-nonpic-6-n64.gd,
ld-mips-elf/pic-and-nonpic-6-n64.nd,
ld-mips-elf/pic-and-nonpic-6-n64.pd,
ld-mips-elf/pic-and-nonpic-6-n64.rd,
ld-mips-elf/pic-and-nonpic-6-n64.sd: New tests.
* ld-mips-elf/mips-elf.exp: Run them.
* config/tc-xtensa.c (exclude_section_from_property_tables): New.
(xtensa_create_property_segments): Use it.
(xtensa_create_xproperty_segments): Likewise.
* reloc.c (BFD_RELOC_MIPS16_GOT16, BFD_RELOC_MIPS16_CALL16): Declare.
* libbfd.h, bfd-in2.h: Regenerate.
* elf32-mips.c (elf_mips16_howto_table_rel): Fill in reserved
R_MIPS16_GOT16 and R_MIPS16_CALL16 entries.
(mips16_reloc_map): Add mappings.
* elf64-mips.c (mips16_elf64_howto_table_rel): Fill in reserved
R_MIPS16_GOT16 and R_MIPS16_CALL16 entries.
(mips16_elf64_howto_table_rela): Likewise.
(mips16_reloc_map): Add mappings.
* elfn32-mips.c (elf_mips16_howto_table_rel): Fill in reserved
R_MIPS16_GOT16 and R_MIPS16_CALL16 entries.
(elf_mips16_howto_table_rela): Likewise.
(mips16_reloc_map): Add mappings.
* elfxx-mips.c (mips_elf_create_shadow_symbol): New function.
(section_allows_mips16_refs_p): Likewise.
(mips16_stub_symndx): Likewise.
(mips_elf_check_mips16_stubs): Treat the data argument as a
bfd_link_info. Mark every dynamic symbol as needing MIPS16 stubs
and create a "shadow" symbol for the original MIPS16 definition.
(mips16_reloc_p, got16_reloc_p, call16_reloc_p, hi16_reloc_p)
(lo16_reloc_p, mips16_call_reloc_p): New functions.
(_bfd_mips16_elf_reloc_unshuffle): Use mips16_reloc_p to generalize
relocation checks.
(_bfd_mips16_elf_reloc_shuffle): Likewise.
(_bfd_mips_elf_lo16_reloc): Handle R_MIPS16_GOT16.
(mips_elf_got16_entry): Add comment.
(mips_elf_calculate_relocation): Use hi16_reloc_p,
lo16_reloc_p, mips16_call_reloc_p, call16_reloc_p and got16_reloc_p
to generalize relocation checks. Use section_allows_mips16_refs_p
instead of mips16_stub_section_p. Handle R_MIPS16_CALL16 and
R_MIPS16_GOT16, allowing the former to refer directly to a
MIPS16 function if its stub is not needed.
(mips16_stub_section_p): Delete.
(_bfd_mips_elf_symbol_processing): Convert odd-valued function
symbols into even MIPS16 symbols.
(mips_elf_add_lo16_rel_addend): Use mips16_reloc_p to generalize
a relocation check.
(_bfd_mips_elf_check_relocs): Calculate "bed" and "rel_end"
earlier in the function. Use mips16_stub_symndx to identify
the target function. Avoid out-of-bounds accesses when the
stub has no relocations; report an error instead. Use
section_allows_mips16_refs_p instead of mips16_stub_section_p.
Use mips16_call_reloc_p and got16_reloc_p to generalize relocation
checks. Handle R_MIPS16_CALL16 and R_MIPS16_GOT16. Don't create
dynamic relocations for absolute references to __gnu_local_gp.
(_bfd_mips_elf_always_size_sections): Pass a bfd_link_info as
the argument to mips_elf_check_mips16_stubs. Generalize comment.
(_bfd_mips_elf_relocate_section): Use hi16_reloc_p and got16_reloc_p
to generalize relocation checks.
(_bfd_mips_elf_finish_dynamic_symbol): If a dynamic MIPS16 function
symbol has a non-MIPS16 stub, redirect the symbol to the stub.
Fix an overly long line. Don't give dynamic symbols type STO_MIPS16.
(_bfd_mips_elf_gc_sweep_hook): Handle R_MIPS16_CALL16 and
R_MIPS16_GOT16.
gas/
* config/tc-mips.c (mips16_reloc_p, got16_reloc_p, hi16_reloc_p)
(lo16_reloc_p): New functions.
(reloc_needs_lo_p): Use hi16_reloc_p and got16_reloc_p to
generalize relocation checks.
(matching_lo_reloc): New function.
(fixup_has_matching_lo_p): Use it.
(mips16_mark_labels): Don't clobber a symbol's visibility.
(append_insn): Use hi16_reloc_p and lo16_reloc_p.
(mips16_ip): Handle BFD_RELOC_MIPS16_GOT16 and BFD_RELOC_MIPS16_CALL16.
(md_apply_fix): Likewise.
(mips16_percent_op): Add %got and %call16.
(mips_frob_file): Use got16_reloc_p to generalize relocation checks.
Use matching_lo_reloc.
(mips_force_relocation): Use hi16_reloc_p and lo16_reloc_p to
generalize relocation checks.
(mips_fix_adjustable): Use lo16_reloc_p to generalize relocation
checks.
gas/testsuite/
* gas/mips/elf-rel8-mips16.d, gas/mips/elf-rel8-mips16.s,
* gas/mips/elf-rel9-mips16.d, gas/mips/elf-rel9-mips16.s,
* gas/mips/elf-rel13-mips16.d, gas/mips/elf-rel13-mips16.s: New tests.
* gas/mips/mips.exp: Run them.
ld/testsuite/
* ld-mips-elf/mips16-local-stubs-1.d: Remove stub_for_h3,
which was only referenced by the .pdr section, and was not
actually needed by code.
* ld-mips-elf/mips16-intermix.d: Remove unused static function stubs.
* ld-mips-elf/mips16-pic-1a.s,
ld-mips-elf/mips16-pic-1b.s,
ld-mips-elf/mips16-pic-1-dummy.s,
ld-mips-elf/mips16-pic-1.dd,
ld-mips-elf/mips16-pic-1.gd,
ld-mips-elf/mips16-pic-1.inc,
ld-mips-elf/mips16-pic-1.ld,
ld-mips-elf/mips16-pic-2a.s,
ld-mips-elf/mips16-pic-2b.s,
ld-mips-elf/mips16-pic-2.ad,
ld-mips-elf/mips16-pic-2.dd,
ld-mips-elf/mips16-pic-2.gd,
ld-mips-elf/mips16-pic-2.nd,
ld-mips-elf/mips16-pic-2.rd: New tests.
* ld-mips-elf/mips-elf.exp: Run them.
* config/tc-m32c.c (OPTION_H_TICK_HEX): Define.
(md_longopts): Add support for it.
(md_parse_option): Likewise.
* doc/as.texinfo (Overview): Add new m32c options.
* doc/c-m32c.texi (M32C-Modifiers): Likewise
* as.h: (enable_h_tick_hex): New.
* app.c (enable_h_tick_hex): New.
(LEX_IS_H): New.
(do_scrub_begin): Mark 'H' and 'h' as special if enable_h_tick_hex.
(do_scrub_chars): If enable_h_tick_hex and 'h', check for H'00
style hex constants and convert the input stream to 0x00 style.
(do_scrub_chars): If a 'X style character constant is found after
a symbol character (like you're or X'00), warn the user.
(COP_INSN): New macro.
(is_opcode_valid): Use them.
(macro) <ld_st>: Use them. Don't accept coprocessor load store
insns based on the ISA if CPU is NO_ISA_COP.
<copz>: Likewise for coprocessor operations.
2008-06-24 Eric B. Weddington <eric.weddington@atmel.com>
Add support for ATtiny13A.
* config/tc-avr.c (mcu_types): Add attiny13a.
* doc/c-avr.texi: Likewise.
* config/tc-mmix.c (s_loc): Assume "negative" addresses belong to
text_section. Do the "stepping backwards" test for text_section
using unsigned operands.
(OP_SH_SEQI, OP_MASK_SEQI): New bit mask and shift count for SEQI.
opcodes/
* mips-dis.c (print_insn_args): Handle field descriptor +Q.
* mips-opc.c (mips_builtin_opcodes): Add Octeon instructions seq,
seqi, sne and snei.
gas/
* config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q.
(mips_ip): Likewise.
(macro_build): Likewise.
(CPU_HAS_SEQ): New macro.
(macro2) <M_SEQ_I, M_SNE_I>: Use it. Emit seq/sne and seqi/snei.
gas/testsuite/
* gas/mips/octeon.s, gas/mips/octeon.d: Add tests for seq* and sne*.
* gas/mips/octeon-ill.s, gas/mips/octeon-ill.s: Add tests for seqi
and snei.
2008-06-09 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Remove support for ATmega32HVB device.
* doc/c-avr.texi: Likewise.
* config/tc-mips.c (mips_frob_file): Don't match MIPS16 relocs
with non-MIPS16 relocs.
gas/testsuite/
* gas/mips/mips16-hilo-match.s: New test.
* gas/mips/mip16-hilo-match.d: New test output.Index: config/tc-mips.c
* elf32-xtensa.c (xtensa_property_section_name): New.
(xtensa_make_property_section): New.
(xtensa_get_property_section): Make static. Do not create a new
section if it does not exist.
gas/
* config/tc-xtensa.c (xtensa_create_property_segments): Use
xtensa_make_property_section instead of xtensa_get_property_section.
(xtensa_create_xproperty_segments): Likewise.
New statics.
(OPTION_ELF_BASE): Make room for new option macros.
(OPTION_SOFT_FLOAT, OPTION_HARD_FLOAT, OPTION_SINGLE_FLOAT,
OPTION_DOUBLE_FLOAT): New option macros.
(md_longopts): Add msoft-float, mhard-float, msingle-float and
mdouble-float.
(md_parse_option): Handle OPTION_SINGLE_FLOAT,
OPTION_DOUBLE_FLOAT, OPTION_SOFT_FLOAT and OPTION_HARD_FLOAT.
(md_show_usage): Add -msoft-float, -mhard-float, -msingle-float
and -mdouble-float.
(struct mips_set_options): New fields soft_float and single_float.
(mips_opts): Initialized them. Add comment for each field
initializer.
(mips_after_parse_args): Set them based on file_mips_soft_float
and file_mips_single_float.
(s_mipsset): Add support for `.set softfloat', `.set hardfloat',
`.set singlefloat' and `.set doublefloat'.
(is_opcode_valid): New function to invoke OPCODE_IS_MEMBER.
Handle single-float and soft-float instructions here.
(macro_build, mips_ip): Use it instead of OPCODE_IS_MEMBER.
(is_opcode_valid_16): New function.
(mips16_ip): Use it instead of OPCODE_IS_MEMBER.
(macro) <M_LDC1_AB, M_SDC1_AB, M_L_DOB, M_L_DAB, M_S_DAB,
M_S_DOB>: Remove special-casing of r4650.
* doc/c-mips.texi (-march=): Add Octeon.
(MIPS Opts): Document -msoft-float and -mhard-float. Document
-msingle-float and -mdouble-float.
(MIPS floating-point): New section. Document `.set softfloat' and
`.set hardfloat'. Document `.set singlefloat' and `.set
doublefloat'.
* config/tc-sparc.c: Accept 'softint_clear' and 'softint_set'
%asr aliases.
* doc/c-sparc.texi: Consistently refer to architecture 'versions',
rather than occaisionally 'levels'. Consistently refer to Sun's
UNIX variant as SunOS, every version of Solaris is also SunOS.
Document new 'softint_clear' and 'softint_set' aliases. Clarify
which architecture versions support '%dcr', '%cq', and '%gl'. Add
section on 32-bit/64-bit opcode translations.
opcodes/
* sparc-dis.c: Emit %stick instead of %sys_tick, and %stick_cmpr
instead of %sys_tick_cmpr, as suggested in architecture manuals.
* Makefile.am (OBJ_FORMAT_CFILES): Add config/obj-fdpicelf.c.
(OBJ_FORMAT_HFILES): Add config/obj-fdpicelf.h.
(obj-fdpicelf.o): Define.
* Makefile.in: Regenerate.
* configure.tgt: Set bfd_gas to yes when fmt is fdpicelf.
(bfin-*-*): Delete.
(bfin-*-linux-uclibc): New; set fmt to fdpicelf and em to linux.
(bfin-*-uclinux*): New; set fmt to elf and em to linux.
* config/obj-fdpicelf.c: New.
* config/obj-fdpicelf.h: Likewise.
* config/tc-bfin.c (bfin_flags, bfin_pic_flag): Set default based on
the OBJ_FDPIC_ELF define.
(OPTION_NOPIC): Define.
(md_longopts): Add mnopic and mno-fdpic.
(md_parse_option): Handle OPTION_NOPIC.
before obj_elf_section_word and add 'warn' arg.
(obj_elf_section_word): Add type pointer arg, and if no #SECTION
is matched, try checking for #SECTION_TYPE.
(obj_elf_section): Adjust for new args.
(obj_elf_type_name): New function.
(obj_elf_type): Call it, and accept STT_foo number strings
in .type statements as output by SunPRO compiler.
* config/tc-sh64.c (shmedia_md_pcrel_from_section): Use
md_pcrel_from_section for BFD_RELOC_64 and BFD_RELOC_64_PCREL.
* gas/sh/sh64/eh-1.d: New.
* gas/sh/sh64/eh-1.d: Likewise.
2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Add attiny167.
* doc/c-avr.texi: Likewise.
/include:
2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
* opcode/avr.h (AVR_ISA_TINY3): Define new opcode set for attiny167.
* config/tc-bfin.c (bfin_start_line_hook): Localize the labels
generated for LOOP_BEGIN and LOOP_END instructions.
(bfin_gen_loop): Likewise.
gas/testsuite/:
* gas/bfin/flow.d: Adjust since the generated labels for LOOP_BEGIN
and LOOP_END instruction are local now.
* gas/bfin/flow2.d: Likewise.
* config/bfin-parse.y (check_macfunc_option): Allow (IU)
option for multiply and multiply-accumulate to data register
instruction.
(check_macfuncs): Don't check if accumulator matches the data register
here.
(assign_macfunc): Check if accumulator matches the
data register in each rule that moves to the data
register.
gas/testsuite/
* gas/bfin/arithmetic.s, gas/bfin/arithmetic.d: Add check
for IU option.
* gas/bfin/expected_errors.l, gas/bfin/expected_errors.s:
Add check for mismatch of accumulator and data register.
opcodes/
* bfin-dis.c (decode_dsp32mac_0): Decode (IU) option for
multiply and multiply-accumulate to data register instruction.
* config/bfin-parse.y (check_macfunc_option): New.
(check_macfuncs): Check option by calling check_macfunc_option.
Fix comparison always true warnings. Both scalar instructions
of vector instruction must share the same mode option. Only allow
option mode at the end of the second instruction of the vector.
(asm_1): Check option by calling check_macfunc_option.
gas/testsuite/:
* gas/bfin/expected_errors.l, gas/bfin/expected_errors.s: Add
tests for bad options of "multiply and multipy-accumulate to
accumulator" instructions. Add new vector instruction option
mode tests.
* gas/bfin/vector2.s: Add new vector instruction option mode test.
* gas/bfin/vector2.d: Adjust accordingly.
* gas/bfin/expected_errors.s, gas/bfin/expected_errors.l: Add test
for mismatched half registers in vector multipy-accumulate
instructions.
From Jie Zhang <jie.zhang@analog.com>
* config/bfin-parse.y (asm_1): Check AREGS in comparison
instructions. And call yyerror () when comparing PREG with
DREG.
gas/testsuite/:
* gas/bfin/expected_comparison_errors.l: New test.
* gas/bfin/expected_comparison_errors.s: New test.
* gas/bfin/bfin.exp: Add expected_comparison_errors.
bfd/
* elf32-arm.c (elf32_arm_howto_table_1): Fix bitmasks for MOVW and
MOVT relocations.
(elf32_arm_final_link_relocate): Fix off by one MOVW/MOVT sign
extension.
(elf32_arm_relocate_section): Handle MOVW and MOVT
relocations. Improve safety check for other weird relocations.
(elf32_arm_check_relocs): Only set h->needs_plt for branch/call
relocations.
gas/
* config/tc-arm.c (md_apply_fix): Use correct offset range.
ld/testsuite/
* ld-arm/arm-elf.exp (armelftests): Add movw-merge and arm-app-movw.
* ld-arm/arm-app-movw.s: New test.
* ld-arm/arm-app.r: Update expected output.
* ld-arm/movw-merge.d: New test.
* ld-arm/movw-merge.s: New test.
* xtensa-isa.c (xtensa_isa_num_pipe_stages): Make max_stage static and
only compute its value once.
gas/
* config/tc-xtensa.c (xtensa_num_pipe_stages): New.
(md_begin): Initialize it.
(resources_conflict): Use it.
Do not regard weak symbols as having a known location.
(md_estimate_size_before_relax): Use new function.
(md_pcrel_from): Do not compute a pcrel against a weak symbol.
2008-02-18 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (match_template): Disallow 'l' suffix when
currently selected CPU has no 32-bit support.
(parse_real_register): Do not return registers not available on
currently selected CPU.
gas/testsuite/
2008-02-18 Jan Beulich <jbeulich@novell.com>
* gas/i386/att-regs.s, gas/i386/att-regs.d,
gas/i386/intel-regs.s, gas/i386/intel-regs.d: New.
* gas/i386/i386.exp: Run new tests.
2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (inoutportreg): New.
(process_immext): New.
(md_assemble): Use it.
(update_imm): Use imm16 and imm32s.
(i386_att_operand): Use inoutportreg.
opcodes/
2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (operand_type_init): Add OPERAND_TYPE_INOUTPORTREG.
* i386-init.h: Regenerated.
* config/tc-arm.c (s_arm_unwind_save): Advance the input line
pointer past the comma after parsing a floating point register
name.
* gas/arm/fp-save.s: New test.
* gas/arm/fp-save.d: Expected disassembly.
* avr.h (AVR_ISA_2xxe): Define.
* config/tc-avr.c (mcu_types): Change the ISA tyoe of the attiny26
to AVR_ISA_2xxe.
(avr_operand): Disallow post-increment addressing in the lpm
instruction for the attiny26.
2008-02-13 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (parse_real_register): Don't return 'FLAT'
if not in Intel mode.
(i386_intel_operand): Ignore segment overrides in immediate and
offset operands.
(intel_e11): Range-check i.mem_operands before use as array
index. Filter out FLAT for uses other than as segment override.
(intel_get_token): Remove broken promotion of "FLAT:" to mean
"offset FLAT:".
gas/testsuite/
2008-02-13 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.s: Replace invalid offset expression with
valid ones.
* gas/i386/x86_64.s: Likewise.
opcodes/
2008-02-13 Jan Beulich <jbeulich@novell.com>
* i386-opc.h (RegFlat): New.
* i386-reg.tbl (flat): Add.
* i386-tbl.h: Re-generate.
2008-02-13 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (allow_pseudo_reg): New.
(parse_real_register): Check for NULL just once. Allow all
register table entries when allow_pseudo_reg is non-zero.
Don't allow any registers without type when allow_pseudo_reg
is zero.
(tc_x86_regname_to_dw2regnum): Replace with ...
(tc_x86_parse_to_dw2regnum): ... this.
(tc_x86_frame_initial_instructions): Adjust for above change.
* config/tc-i386.h (tc_regname_to_dw2regnum): Remove.
(tc_parse_to_dw2regnum): New.
(tc_x86_regname_to_dw2regnum): Replace with ...
(tc_x86_parse_to_dw2regnum): ... this.
* dw2gencfi.c (tc_parse_to_dw2regnum): New, broken out of ...
(cfi_parse_reg): ... this. Use tc_parse_to_dw2regnum. Adjust
error handling.
gas/testsuite/
2008-02-13 Jan Beulich <jbeulich@novell.com>
* gas/cfi/cfi-i386.s: Add code testing use of all registers.
Fix a few comments.
* gas/cfi/cfi-x86_64.s: Likewise.
* gas/cfi/cfi-i386.d, gas/cfi/cfi-x86_64.d: Adjust.
opcodes/
2008-02-13 Jan Beulich <jbeulich@novell.com>
* i386-gen.c (process_i386_registers): Process new fields.
* i386-opc.h (reg_entry): Shrink reg_flags and reg_num to
unsigned char. Add dw2_regnum and Dw2Inval.
* i386-reg.tbl: Provide initializers for dw2_regnum. Add pseudo
register names.
* i386-tbl.h: Re-generate.
argument.
(tic4x_insn_add): Likewise.
(md_begin): Drop cast that was discarding a const qualifier.
* config/tc-d30v.c (get_reloc): Add const qualifier to op
argument.
(build_insn): Drop cast that was discarding a const qualifier.
* config/tc-xtensa.c (relax_frag_immed): Change internal consistency
checks into assertions. When relaxation produces an operation that
does not fit in the current FLIX instruction, make sure that the
operation is relaxed as needed to account for being placed following
the current instruction.
2008-01-23 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Change opcode set for at86rf401.
/include:
2008-01-23 Eric B. Weddington <eric.weddington@atmel.com>
* opcode/avr.h (AVR_ISA_RF401): Add new opcode set for at86rf401.
2008-01-03 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Change opcode set for avr3,
at90usb82, at90usb162.
* doc/c-avr.texi: Change architecture grouping for at90usb82,
at90usb162.
These changes support the new avr35 architecture group in gcc.
/include:
2008-01-03 Eric B. Weddington <eric.weddington@atmel.com>
* opcode/avr.h (AVR_ISA_USB162): Add new opcode set.
(AVR_ISA_AVR3): Likewise.
PPC_OPCODE_ALTIVEC and PPC_OPCODE_SPE flags.
* gas/ppc/altivec_and_spe.s: New test - checks that ISA extension
command line options (-maltivec, -mspe) can be specified before
CPU selection command line options.
* gas/ppc/altivec_and_spe.d: Expected disassembly.
* gas/ppc/ppc.exp: Run the new test
* config/tc-xtensa.c (xg_symbolic_immeds_fit): Relax for weak
references but not weak definitions.
gas/testsuite/
* gas/xtensa/all.exp: Run new weak-call test.
* gas/xtensa/weak-call.d: New.
* gas/xtensa/weak-call.s: New.
wide branches.
(get_aligned_diff): For RELAX_ALIGN_NEXT_OPCODE, skip to the next
non-empty frag to find the LOOP instruction. Change comma typo to
a semicolon.
(relax_frag_immed, convert_frag_immed): Rename wide_insn variable to
from_widen_insn.
* config/tc-mips.h (mips_nop_opcode): Declare.
(NOP_OPCODE): Define.
(mips_segment_info): New structure.
(TC_SEGMENT_INFO_TYPE): Use it instead of insn_label_list.
* config/tc-mips.c (label_list): Adjust for new TC_SEGMENT_INFO_TYPE.
(mips_record_mips16_mode): New function.
(install_insn): Call it.
(mips_align): Likewise. Turn the fill argument into an "int *".
Use frag_align_code for code segments if no fill data is given.
(s_align): Adjust call accordingly.
(mips_nop_opcode): New function.
(mips_handle_align): Use the first variable byte to decide which
nop sequence is needed. Use md_number_to_chars and mips16_nop_insn.
gas/testsuite/
* gas/mips/align2.s, gas/mips/align2.d, gas/mips/align2-el.d: New
tests.
* gas/mips/mips.exp: Run them.
(xg_finish_frag, xg_assemble_literal_space): Replace calls to it.
(xtensa_create_property_segments, xtensa_create_xproperty_segments):
Set output_section for new property sections. Use subseg_set and
seg_info instead of retrieve_segment_info. Adjust arguments to
add_xt_block_frags and add_xt_prop_frags. Use standard functions
to create frags and fix records.
(retrieve_segment_info): Delete.
(add_xt_block_frags, add_xt_prop_frags): Replace calls to
retrieve_segment_info. Remove unused xt_block_sec arguments.
* config/tc-s390.c (md_begin): If the -mesa option is specified
add zarch opcodes to the hash table only if there is no variant
that is available for the esa mode as well.
2007-11-29 Martin Schwidefsky <schwidefsky@de.ibm.com>
* gas/s390/esa-z9-109.d: Add check for old version of sske.
* gas/s390/esa-z9-109.s: Likewise.
with loc_directive_seen and debug_line.
* config/tc-xtensa.c: Include xtensa-istack.h after dwarf2dbg.h.
(xg_build_to_insn): Copy the new fields instead of linenum.
(xg_build_token_insn): Likewise. Abort on INSTR_LABEL_DEF and move
common code out of the switch.
(md_assemble): Set new tinsn fields from DWARF information. Call
dwarf2_consume_line_info.
(xg_assemble_vliw_tokens): Update the code to select the "best" line
number to use new information. Call dwarf2_gen_line_info instead
of dwarf2_emit_insn.
(dwarf2_emit_insn): Use it here.
(dwarf2_directive_loc): Fix check for consecutive .loc directives
when debug_type is DEBUG_DWARF2.
* dwarf2dbg.h (dwarf2_consume_line_info): New prototype.
* config/tc-ia64.c (ia64_flush_insns): Call dwarf2_consume_line_info.
(md_assemble): Likewise.
testsuite/
* gas/lns/lns.exp: Run lns-common-1 with alternate source for ia64.
* gas/lns/lns-common-1-ia64.s: New file.
* config/tc-mn10300.h (TC_FORCE_RELOCATION): Call mn10300_force_relocation.
* elf-m10300.c (mn10300_elf_final_link_relocate): Prevent the accidental termination of DWARF location list entries.
(mn10300_elf_relax_delete_bytes): Stop deletion if an align reloc is encountered that is larger than or not a mutliple of the number of bytes being deleted.
When adjusting symbols, any symbols inside the region being deleted must be moved to the end of the region.
Move align relocs forward if there is room for them after the deletion of the region.
* config/tc-mn10300.h (md_allow_eh_opt): Define. Only allow call frame optimization if linker relaxation is not enabled.
* gas/elf/elf.exp: Disable ehopt test for mn10300.
* reloc.c (BFD_RELOC_MN10300_ALIGN): Add.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf-m10300.h: Handle R_MN10300_ALIGN relocs.
* mn10300_elf_relax_delete_bytes): Honour R_MN10300_ALIGN relocs.
Re-fix off by one error in comparisons.
* config/tc-mn10300.c (tc_gen_reloc): Fix test that decides when
sym_diff relocs should be generated.
(md_apply_fix): Skip R_MN10300_ALIGN relocs.
(mn10300_fix_adjustable): Do not adjust R_MN10300_ALIGN relocs.
(mn10300_handle_align): New function. Generate R_MN10300_ALIGN
relocs to record alignment requests.
* config/tc-mn10300.h (TC_FORCE_RELOCATION_SUB_SAME): Also force
R_MN10300_ALIGN relocs.
(HANDLE_ALIGN): Define. Call mn10300_handle_align.
* gas/all/gas.exp: Do not run diff1.s test for mn10300.
* ld-mn10300/mn10300.exp: Run new tests. Skip i126256 test if
a compiler is not available.
* ld-mn10300/i112045-3.s: New test.
* ld-mn10300/i112045-3.d: Expected disassembly.
* ld-mn10300/i135409.s: Rename to i135409-1.s.
* ld-mn10300/i135409.d: Rename to i135409-1.d
* ld-mn10300/i135409-2.s: New test.
* ld-mn10300/i135409-2.d: Expected symbol table.
* ld-mn10300/i36434.d: Adjust expected disassembly.
* config/tc-ppc.c (ppc_setup_opcodes): Verify instructions are sorted
according to major opcode number.
opcodes/
* ppc-opc.c (TE): Correct signedness.
(powerpc_opcodes): Sort psq_st and psq_stu according to major
opcode number.
2007-10-12 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (process_operands): Check the firstxmm0
field in opcode_modifier for instruction with a implicit
xmm0 as the first operand.
opcodes/
2007-10-12 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (opcode_modifiers): Add FirstXmm0.
* i386-opc.h (FirstXmm0): New.
(IsPrefix): Updated.
(i386_opcode_modifier): Add firstxmm0.
* i386-opc.tbl (blendvpd): Replace RegKludge with FirstXmm0.
(blendvps): Likewise.
(pblendvb): Likewise.
* i386-tbl.h: Regenerated.
comma then the following argument must be a subsection number.
* testsuite/gas/elf/elf.exp (run_elf_list_test): Run section6 test.
* testsuite/gas/elf/section6.s: New file: Check behaviour of .pushsection with a subsection argument.
* testsuite/gas/elf/section6.d: New file: Expected disassembly.
* config/tc-mips.c (AT): Rename to...
(ATREG): ... this.
(AT): New definition.
(mips_set_options): Rename "noat" to "at"; change the type.
(mips_opts): Update accordingly.
(append_insn): Likewise.
(macro_build_ldst_constoffset): Likewise.
(load_address): Likewise.
(macro, macro2): Likewise.
(s_mipsset): Handle ".set at=REG". Update handling of ".set at"
and ".set noat".
gas/testsuite/:
* gas/mips/at-1.d, gas/mips/at-2.l: New tests to check the ".set
at=REG" directive.
* gas/mips/at-1.s, gas/mips/at-2.s: Sources for the new tests.
* gas/mips/mips.exp: Run the new tests.
