* ocd.c: move ocd_write_bytes proto to ocd.h since it is used
by ppc-bdm.c, use OCD_LOG_FILE to help debugging, define
BDM_BREAKPOINT if not defined in tm.h
(ocd_error): add new error cases
(ocd_start_remote): send the OCD_INIT command before
OCD_AYT and OCD_GET_VERSION calls, 80 was correct speed after all
(ocd_write_bytes): no longer static
(ocd_insert_breakpoint): no longer static
(ocd_remove_breakpoint): new
* ocd.h: add protos for ocd_write_bytes, ocd_insert_breakpoint,
and ocd_remove_breakpoint
* ppc-bdm.c: change bdm_ppc_ops so we call ocd_insert_breakpoint
and ocd_remove_breakpoint instead of memory_insert_breakpoint
and memory_remove_breakpoint.
(bdm_ppc_open): after calling ocd_open, modify DER
register so interrupts will drop us into debugging mode, finally
disable the watchdog timer on the board so we don't leave BDM
mode unexpectedly.
* ocd.c: move ocd_write_bytes proto to ocd.h since it is used
by ppc-bdm.c, use OCD_LOG_FILE to help debugging, define
BDM_BREAKPOINT if not defined in tm.h
(ocd_error): add new error cases
(ocd_start_remote): send the OCD_INIT command before
OCD_AYT and OCD_GET_VERSION calls
(ocd_write_bytes): no longer static
(ocd_insert_breakpoint): no longer static
(ocd_remove_breakpoint): new
* ocd.h: add protos for ocd_write_bytes, ocd_insert_breakpoint,
and ocd_remove_breakpoint
* ppc-bdm.c: change bdm_ppc_ops so we call ocd_insert_breakpoint
and ocd_remove_breakpoint instead of memory_insert_breakpoint
and memory_remove_breakpoint.
(bdm_ppc_open): after calling ocd_open, modify DER
register so interrupts will drop us into debugging mode, finally
disable the watchdog timer on the board so we don't leave BDM
mode unexpectedly.
AM_PROG_LIBTOOL. Remove shared library handling; now handled by
libtool. Add AM_CONFIG_HEADER. Change AC_PROG_INSTALL to
AM_PROG_INSTALL. Add AM_EXEEXT.
* Makefile.am (LINK): Remove.
(gprof_LDFLAGS): Remove
(gprof_DEPENDENCIES): Change libbfd.a to libbfd.la.
(gprof_LDADD): Likewise.
($(OBJECTS)): Depend upon gconfig.h and ../bfd/config.h.
* gprof.h: Undefine PACKAGE and VERSION after including BFD
sysdep.h file, then include new gconfig.h file.
* gprof.c (VERSION): Don't define.
* acconfig.h: New file.
* stamp-h.in: New file.
* gconfig.in: New file, created by autoheader.
* Makefile.in, configure, aclocal.m4: Rebuild.
-new. Load ld-lib.exp rather than ld.exp.
* ld-bootstrap/bootstrap.exp: Use ld-new rather than ld.new.
* lib/ld-lib.exp: Rename from lib/ld.exp, for the benefit of
DejaGnu changes.
* acinclude.m4: New file, from old aclocal.m4.
* configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL. Remove
shared library handling; now handled by libtool. Replace
AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AC_PROG_YACC,
AC_PROG_LEX, and AC_DECL_YYTEXT. Call AM_MAINTAINER_MODE,
AM_CYGWIN32, and AM_EXEEXT. Don't call CY_CYGWIN32 or CY_EXEEXT.
* configure.host: Don't set HLDFLAGS, HLDENV, or RPATH_ENVVAR.
* acconfig.h: Mention PACKAGE and VERSION.
* stamp-h.in: New file.
* ldver.c (ld_program_vresion): Set ld_program_version from
VERSION.
* ldgram.y, ldlex.l: Replace VERSION with VERSIONK.
* Makefile.in: Now built with automake.
* aclocal.m4: Now built with aclocal.
* configure, config.in: Rebuild.
* config/tic80/tic80.mt:
(GDBSERVER-DEPFILES, GDBSERVER_LIBS): Define for gdbserver.
(SIM): Remove -lm to prevent make errors.
* configure.tgt: add gdbserver to configdirs for tic80.
end-sanitize-tic80
* gdbserver/utils.c (error): Change prototype to match defs.h.
* gdbserver/low-sim.c: Change simulator calls to use new interface.
* remote.c (remote_write_bytes): Include '$' at start of packet
and checksum at end of packet in overhead calculation.
(dll_do_command): New static variable if _WIN32.
(ocd_open): Set dll_do_command if _WIN32.
(ocd_write): Use dll_do_command rather than do_command.
* config/i386/cygwin32.mh (XDEPFILES): Remove libwigglers.a.
(BDM_DLLNAME, BDM_LIBNAME, BDM_DEFFILE): Don't define.
($(BDM_LIBNAME)): Remove target.
* wigglers.def: Remove.
dynamically allocated, rather than fixed size. Pass "gdbtcl" to
ide_initialize_paths to match installed directory name. If IDE,
use auto_path to search for main.tcl.
* Makefile.in (install-only): If ENABLE_IDE, install from gdbtcl2
rather than gdbtcl.
(gdbtk_init): Add gdbtk_cleanup as a final cleanup. Uncomment
call to ide_initialize_paths. If we can't initialize the event
system, set GDBTK_IDE to 0 in the Tcl interpreter. Create the
ide_window_register and the ide_window commands. Initialize tk,
itcl, and tix after initializing the IDE.
Changes to OCD support to support wiggler box as well as
target boxes:
* ocd.c: change speed in init command to 0 from 80,
add (temporary) logging commands to help debugging,
(ocd_open): if "target ocd wiggler lpt" then use special
ser-ocd.c serial interface which communicates with Wigglers.dll,
otherwise do as we did before
(ocd_get_packet): add OCD_LOG_FILE and OCD_SET_CONNECTION to
switch of known commands of len 0
* ocd.h: add OCD_LOG_FILE
* serial.c (serial_open): do serial_interface_lookup on ocd
in the case of ocd
* ser-ocd.c: add buffer to contain responses from sending a
command to the Wigglers.dll.
(ocd_readchar): return curr char from buffer and increment ptr
(ocd_write): send buffer to Wigglers.dll, storing response in
return buffer and initializing curr location ptr to start of
buffer.
Nomenclature change. BDM is a specific type of OCD
(On chip debugging). Wiggler is the parallel port box controlled
by Wigglers.dll. The faster target box from Macraigor Systems
is not a wiggler.
* ocd.c:
* ocd.h:
* ppc-bdm.c:
* ser-ocd.c:
Replace all instances of "wiggler_" with "ocd_" and change most other
instances of "wiggler" to "ocd" or "ocd device" depending on context.
* config/m68k/monitor.mt: remove remote-wiggler.o from TDEPFILES
until OCD with that target is supported again.
* Makefile.in: add DLLTOOL = @DLLTOOL@, pass on DLLTOOL to
sub makes, change clean rule to also remove *.a to remove
libwigglers.a, in dependencies: add ppc-bdm.o ocd.o ser-ocd.o and
remove remote-wiggler.o
* configure.in: add DLLTOOL support
* configure: regenerate
* wigglers.def: new file for imports for wigglers.dll
* ser-ocd.c: new file which is layer between ocd.c and either the
wigglers.dll or the target box, only stub so far
* config/powerpc/ppc-eabi.mt: add ppc-bdm.o to TDEPFILES
* config/powerpc/ppc-sim.mt: add ppc-bdm.o to TDEPFILES
* config/i386/cygwin32.mh: add ocd.o ser-ocd.o libwigglers.a
to XDEPFILES, add rules to build libwigglers.a
checking in changes of Stu Grossman <grossman@cygnus.com>:
* remote-wiggler.c: delete
* ocd.c: new, was remote-wiggler.c
always include sys/types.h, include ocd.h, move WIGGLER
commands and many wiggler prototypes to ocd.h, make wiggler_desc
static, stop making local wiggler functions static,
define write_mem_command for wiggler_write_bytes
(wiggler_start_remote): stop hardcoding the target type,
instead set and use a target_type variable.
(wiggler_open): add new target_type and ops args
(wiggler_wait): now no longer takes pid and target_status as args,
stop trying to set target_status struct, remove BGND insn
checks
(read_bdm_registers): renamed to wiggler_read_bdm_registers
(wiggler_read_bdm_registers): numregs arg changed to reglen arg,
remove pktlen check, set reglen instead of numregs
(dump_all_bdm_regs): delete
(wiggler_fetch_registers): delete
(wiggler_prepare_to_store): now just an empty function
(wiggler_store_registers): delete
(wiggler_read_bdm_register): new
(wiggler_write_bdm_registers): new
(wiggler_write_bdm_register): new
(wiggler_write_bytes): use write_mem_command variable instead of
WIGGLER_WRITE_MEM
(get_packet): renamed to wiggler_get_packet, change refs throughout
(put_packet): renamed to wiggler_put_packet, change refs throughout
(wiggler_get_packet): add break to default case of switch,
change length of WIGGLER_GET_VERSION len to 10 from 4 to match
specs
(wiggler_mourn): unpush_target with current_ops, not &wiggler_ops
(flash_xfer_memory): delete
(noop_store_registers): new placeholder replacement for
target_store_registers() which prevents generic_load from trying to
set up the PC.
(bdm_update_flash_command): add store_registers_tmp variable,
make handling of wiggler_ops more generic -- define wiggler_ops
in a target-specific file instead (such as ppc-bdm.c in the case
of the ppc), use current_target to deal with registers again
making this file less target-specific.
(bdm_read_register_command): new
(_initialize_remote_wiggler): stop doing add_target (&wiggler_ops),
comment out add_cmd ("read-register", ...)
* ocd.h: new, contains common wiggler prototypes, command definitions
* ppc-bdm.c: file for ppc-specific OCD code, including target_ops
structure for ppc bdm
(bdm_ppc_open): new
(bdm_ppc_wait): new
(bdm_ppc_fetch_registers): new
(bdm_ppc_store_registers_: new
(_initialize_bdm_ppc): new
* config/powerpc/tm-ppc-eabi.h: add necessary CPU32 BDM defines
