support for WinGDB. Add mswin to configdirs.
* configure.in configure: Move calls to configure.host and
configure.tgt to the top of configure.in to allow them to set
config variables before they are referenced.
ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
and CONFIG_OBS.
* configure configure.in: Clean up test cases around thread support.
start-sanitize-v850
* configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
host is Windows.
end-sanitize-v850
* c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
printcmd.c valops.c value.h values.c: Add bfd_section arg to
value_at and value_at_lazy.
* coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
Add bfd_section arg to prim_record_minimal_symbol_and_info.
* corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
instead of read_memory. It takes a bfd_section arg.
* coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
unnecessary cast for assignment of struct dbx_symfile_info.
Struct objfile now uses a real pointer instead of PTR for this
element.
* dbxread.c (dbx_symfile_init): Stash bfd section pointers for
text, data and bss into dbx_symfile_info.
* exec.c (xfer_memory): Handle transfers for user-specified
sections.
* findvar.c (read_var_value locate_var_value): Copy bfd section
from the symbol to the value.
* gdb-stabs.h: Add section pointers for text, data and bss
sections.
* maint.c (translate address command): Add test code for overlay
address translation.
* printcmd.c (do_examine do_one_display): Now takes a bfd section
arg.
* (print_formatted x_command): Record current section along with
current address for repeated commands.
* sparc-nat.c (fetch_inferior_registers): Change
target_xfer_memory to target_{read write}_memory to allow changes
to target_xfer_memory interface for section info.
* symmisc.c (dump_msymbols print_symbol): Print section
assocaited with symbol.
* symtab.c (fixup_symbol_section): New routine to
add section info to symbols returned by lookup_symbol.
* symtab.h (struct general_symbol_info): Add bfd section to
symbols.
* target.c target.h (target_xfer_memory): Add bfd section to
args.
* (target_read_memory_section): New routine to read data from a
specific section.
* (target_memory_bfd_section): New global variable to pass bfd
section in to targets.
* valarith.c (value_add value_addr value_array): Preserve bfd
section when computing new value.
* value.h (struct value): Add bfd section to values.
* values.c (allocate_value value_copy): Initialize/preserve bfd
section.
* (unpack_double): Clean up _MSC_VER conditionals to remove
duplicate code.
start-sanitize-v850
* v850ice.c: New module to support communication with NEC's
PC-based ICE.
* config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
ep names with rxx names. sp and fp are renamed via a different
mechanism.
end-sanitize-v850
* config.in, configure.in, configure: Check for <objlist.h>.
* configure.tgt: Handle mips*-sgi-irix6* like irix5 for now.
* cp-valprint.c (cp_print_value_fields): Use SYMBOL_VALUE_ADDRESS
instead of SYMBOL_BLOCK_VALUE to get the address of a static member.
* dwarf2read.c: Turn warnings and recoverable errors into complaints,
add new complaints where appropriate.
gcc -Wall cleanup.
(struct line_head): Change line_base from char to int to avoid
problems with compilers whose plain char is represented by an
unsigned char.
(struct partial_die_info): Add is_declaration field.
(dwarf2_tmp_obstack): New obstack for allocating temporary storage
used during symbol reading.
(cu_header_offset): New variable for resolving relative reference
dies.
(optimized_out, basereg, islocal, frame_base_reg, frame_base_offset):
New interface variables for decode_locdesc.
(struct dwarf2_pinfo): New structure for communication between
psymtab and symtab reading, passed via pst->read_symtab_private.
(dwarf2_has_info, dwarf2_build_psymtabs): Accept objects files
without line number sections.
(dwarf2_build_psymtabs_hard): Initialize temporary obstack
for symbol reading.
Allocate and initialize pst->read_symtab_private.
Relocate pst->textlow and pst->texthigh with baseaddr.
(scan_partial_symbols): Do not add DW_AT_declaration symbols
to the partial symbol table.
Add file scope enumerator symbols to the partial symbol table.
Fix typo in highpc computation.
If we didn't find a lowpc, set it to highpc to avoid complaints
from `maint check.
(add_partial_symbol): Relocate symbol values with baseaddr.
Add static DW_TAG_subprogram and DW_TAG_variable symbols to the
minimal symbol table.
Obtain symbol values for DW_TAG_variable symbols from the location
descriptor, skip symbols with missing location desciptors.
Skip symbols for aggregate types without children.
Handle enumerator symbols.
(dwarf2_psymtab_to_symtab): Issue symbol reading message if verbose.
(psymtab_to_symtab_1): Set local variables from
pst->read_symtab_private, set cu_header_offset and baseaddr.
Initialize temporary obstack for symbol reading, initialize
buildsym and add a cleanup to really_free_pendings.
Relocate highpc with baseaddr when calling end_symtab.
If the compilation is from a C file generated by language
preprocessors, do not set the symtab language if it was already
deduced by start_subfile.
Removed verbose sorting symbol table message.
(process_die): Handle DW_TAG_ptr_to_member_type and
DW_TAG_reference_type.
Use read_subroutine_type to get the function type for
DW_TAG_subprogram before calling read_func_scope.
(read_file_scope): Initialize file name to <unknown>, start_subfile
expects a non-NULL name.
If we didn't find a lowpc, set it to highpc to avoid complaints
from finish_symbol.
Relocate lowpc and highpc with baseaddr.
Get rid of Irix6.2 native cc compile machine prefix in comp_dir.
Zero out ftypes for each new compilation unit (may be different
language or different objfile).
Accept compilation units without line number information, pass
comp_dir to decode_lines.
(read_func_scope): Initialize function name to <unknown> to avoid
core dumps when DW_AT_name is missing.
Relocate lowpc and highpc with baseaddr.
Handle DW_AT_frame_base, keep result for DW_OP_fbreg operations.
Pass function type to new_symbol.
(read_lexical_block_scope): Relocate lowpc and highpc with baseaddr.
(read_structure_scope): Set TYPE_TAG_NAME, not TYPE_NAME.
Handle DW_TAG_class_type.
Copy fields to type_obstack, release temporary storage for fields.
Don't add symbol if die is a stub die and has no children.
Handle C++ static member fields.
(read_enumeration): Set TYPE_TAG_NAME, not TYPE_NAME.
Copy fields to type_obstack, release temporary storage for fields.
Let new_symbol handle the symbol creation for enumerators
instead of handcrafting a symbol.
Determine signedness of enum type from enumerators.
(dwarf_read_array_type): Handle variable length arrays.
Use lookup_pointer_type instead of handcrafting a type.
Create array type only if a DW_TAG_subrange_type was found.
(read_tag_pointer_type, read_tag_reference_type):
Use lookup_pointer_type and lookup_reference_type instead
of handcrafting a type.
(read_tag_ptr_to_member_type): New function to handle
DW_TAG_ptr_to_member_type.
(read_subroutine_type): Handle parameter dies.
Use lookup_function_type instead of handcrafting a type.
(read_typedef): Allocate a TYPE_CODE_TYPEDEF type for the typedef.
(read_base_type): If the type has a name, use init_type to create
a new type instead of second guessing a fundamental type.
(read_comp_unit): Reset die reference table before building
a new one.
(dwarf2_read_section): Read section contents into psymbol_obstack.
(dwarf2_read_abbrevs): Handle unterminated abbreviations
for a compile unit gracefully.
(read_partial_die): Zero partial die before reading its info.
Handle DW_AT_declaration.
Fix typo in handling of DW_FORM_block4.
(read_full_die): Fix typo in handling of DW_FORM_block4.
(read_1_signed_byte, read_2_signed_bytes, read_4_signed_bytes):
New routines to get signed values from a buffer.
(read_n_bytes, read_string): Allocate storage from the temporary
obstack. If the host char size permits it, return pointer
to buffer instead of allocating storage.
(set_cu_language): Handle DW_LANG_Mips_Assembler.
(dwarf_attr): Return NULL if reference die for DW_AT_specification
or DW_AT_abstract_origin die is not found.
(record_minimal_symbol): Removed, replaced with a direct call to
prim_record_minimal_symbol, it now handles saving the string itself.
(convert_locdesc): Removed, partial symtab reading now uses
decode_locdesc.
(dwarf_attr): Use dwarf2_get_ref_die_offset to get the absolute
offset for the die reference.
(dwarf_decode_lines): Complain if the line section info is missing.
Use read_1_signed_byte to extract lh.line_base to avoid
problems with compilers whose plain char is represented by an
unsigned char.
Add cleanups for allocated temporary storage.
Start a subfile for the first file in the state machine.
Fix off by one problem with dirs.dirs access.
Use comp_dir when directory index is 0.
Support multiple sequences (from Jason Merrill <jason@cygnus.com>).
(dwarf2_start_subfile): Try to keep line numbers from identical
absolute and relative file names in a common subfile.
(new_symbol): Allocate symbol and symbol name on the symbol_obstack.
Set SYMBOL_LINE from DW_AT_decl_line if present.
Set SYMBOL_TYPE from passed type if not NULL.
Change DW_TAG_variable symbol types with missing type entries
to a sensible type.
Handle optimized_out, offreg and islocal storage classes.
Add external symbols with type information whose address isn't
known as LOC_UNRESOLVED symbols.
Synthesize typedefs for C++ classes, structs, unions and enumerations.
Handle DW_TAG_enumerator symbols, complain for unrecognized
symbol tags.
(die_type): A missing DW_AT_type represents a void type.
Use dwarf2_get_ref_die_offset to get the absolute offset for
the die reference.
(die_containing_type): New function to build type from
DW_AT_containing_type attribut.
(read_type_die): Handle DW_TAG_ptr_to_member_type.
Treat DW_TAG_subprogram like DW_TAG_subroutine_type.
(dwarf_base_type): Fix typo with creation of FT_UNSIGNED_SHORT
fundamental type.
(create_name): Removed, symbol name allocation is now done
in new_symbol.
(dump_die): Use print_address_numeric to print a CORE_ADDR.
(dwarf2_empty_die_ref_table): New function to clear the die
reference table.
(dwarf2_get_ref_die_offset): New function to get the absolute
die offset from a die reference attribute.
(decode_locdesc): Complete rewrite using a stack, code mostly
borrowed from dwarfread.c:locval.
(dwarf_alloc_type): Removed, replaced by direct calls to alloc_type.
(dwarf_alloc_block): Allocate block on temporary obstack.
* elfread.c (elf_symtab_read): When handling Irix dynamic symbols,
skip section name symbols and relocate all others.
(elf_symfile_read): Build dwarf2 psymtab even if offset is non-zero.
* irix5-nat.c (fetch_core_registers): Handle core_reg_sect
from N32 executables. Call registers_fetched after extracting
the registers.
(obj_list_variant, struct link_map, LM_OFFSET, LM_ADDR): New
definitions to enable support of O32 and N32 format objlists.
(struct so_list): New members offset, so_name and lmstart to
eliminate dependencies from the objlist format used.
(solib_map_sections, symbol_add_stub, solib_add,
info_sharedlibrary_command, solib_address, clear_solib): Use
so_name and LM_OFFSET.
(first_link_map_member): Rewrite to enable support of O32 and N32
format objlists.
(next_link_map_member, xfer_link_map_member): New functions to
support O32 and N32 format objlists.
(find_solib): Use first_link_map_member, next_link_map_member and
xfer_link_map_member.
(solib_create_inferior_hook): Use TARGET_SIGNAL_* instead of
host signal numbers.
* mdebugread.c (parse_partial_symbols, handle_psymbol_enumerators):
Pass CORE_ADDR variant to add_psymbol_to_list.
* mips-tdep.c (heuristic_proc_desc): Stop examining the prologue
if we encounter a positive stack adjustment. Handle `move $30,$sp'.
Handle `sd reg,offset($sp)' for 32 bit ABIs.
* symmisc.c (dump_msymbols, print_partial_symbols): Use
print_address_numeric to print a SYMBOL_VALUE_ADDRESS.
(dump_symtab): Print compilation directory if it is not NULL.
* valops.c (search_struct_field, value_struct_elt_for_reference):
Use SYMBOL_VALUE_ADDRESS instead of SYMBOL_BLOCK_VALUE to get the
address of a static member.
if we encounter a positive stack adjustment.
(find_proc_desc): If heuristic_fence_post is non-zero, use
heuristic_proc_start to determine the start of a function before
calling heuristic_proc_desc.
* coffread.c (coff_symtab_read): Change minimal symbol types
for C_LABEL symbols from mst_* to mst_file_*.
* config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
* configure.in: Handle error message from sun3 native ld when
configuring HLDFLAGS.
* configure: Regenerated with autoconf.
* c-valprint.c (c_value_print): Adjust value address by VALUE_OFFSET.
* cp-valprint.c (cp_print_value): Prevent gdb crashes by making sure
that the virtual base pointer from an user object still points to
accessible memory.
* dbxread.c (dbx_symfile_init): Initialize sym_stab_info to
clear the recently added header_files fields.
(dbx_symfile_finish): Free hfiles[i].vector to avoid storage leak.
markers correctly; this fixes problem on Vr5000 where all
functions in a module had the same address.
* configure.in, configure.tgt, configure.host, gdbserver/configure.in:
Correct for pc-linux-gnu problem in config.guess.
* configure: Regenerate.
files).
* (SUBDIRS): Remove mswin.
* Change procedure for creating init.c. Speeds things up quite a
bit.
* config.in configure configure.in: Check for select, poll.
* Check for OSF header files before including hpux-thread.o.
* Don't configure doc or testsuite when building under MSVC.
* findvar.c value.h (read_register_pid write_register_pid): Make
global. Needed for hppa-tdep.c.
* (supply_register): Don't set pid to inferior_pid when supplying
registers.
* hppa-tdep.c (saved_pc_after_call): frame_saved_pc ->
FRAME_SAVED_PC.
* (frame_saved_pc): Change name to hppa_frame_saved_pc.
* (hppa_pop_frame): Don't use a pid of 0 with target_write_pc.
Use write_pc instead, which uses the correct pid.
* (target_read_pc target_write_pc): Use read/write_register_pid
instead of read/write_register to preserve the pid passed in.
* inftarg.c (child_can_run): Add flag child_suppress_run to allow
hpux-threads.c to override this as a runnable target.
* config/pa/nm-hppah.h: Define target_new_objfile and
target_pid_to_str.
* config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc
instead of frame_saved_pc.
* config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb.
* config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since
we can't easily determine the start file bounds with ELF.
* config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb.
* hpux-thread.c: New file for HPUX/OSF thread support.
* osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h
RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h
cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h
cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h
cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF
thread support.
(HLDENV): Set to @HLDENV@.
(gdb): Prefix link command line with $(HLDENV).
* configure.in: Add support to test for --enable-shared and
generate appropriate values for HLDFLAGS and HLDENV.
* configure: Regenerated with autoconf.
PR 10489
mainsym def into the block it's used in.
* configure.in configure: Allow NATDEPFILES to be recognized in
.mh files regardless of whitespace.
* cpu32bug-rom.c (cpu32bug_cmds): Change load_response string to
keep downloads from hanging.
* remote-wiggler.c: Add support for flash upgrades.
* (wiggler_error): Fix message format. Add new error code.
* (wiggler_write_byets): Error code is hex. Report errors with
proper routine name.
* (wiggler_read_byets): Report errors with proper routine name.
* (get_packet): Add support for new flash commands.
* (wiggler_load): Call clear_symtab_users() to reset things
properly after download.
* (flash_xfer_memory bdm_update_flash_command): New funxtions to
support flash upgrades for Wiggler.
* (_initialize_remote_wiggler): Add `bdm update-flash' command.
mswin/libwingdb.a and remote-wiggler.o.
* breakpoint.c (breakpoint_here_p): Clean up bp enabled test.
* (breakpoint_inserted_here_p): New func, just like
breakpoint_here_p, except it's honest. Honestly.
* breakpoint.h: Proto for above.
start-sanitize-gdbtk
* configure configure.in: Add host *windows* to list of hosts
that don't support GDBtk.
end-sanitize-gdbtk
* configure configure.in: Add mswin to configdirs if host is
i[3456]86-*-windows.
* core-aout.c (fetch_core_registers register_addr) gdbcore.h:
Change all vars that can contain addresses to type CORE_ADDR.
* findvar.c (supply_register): Allow val to be NULL. This means
that regno is unsupported.
* (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms
just call pid forms with inferior_pid so that there's only once
place to hack PC's and such.
* infrun.c (proceed): Don't skip breakpoints if user changed PC.
* remote-wiggler.c: New file. Support for BDM interface from
Macraigor Systems.
* serial.c: Enhance serial logging capability. Add hex and octal
output modes (set remotelogbase {hex|octal|ascii}. Also log
breaks, timeouts, errors, and eofs.
* serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper
function so that we can log breaks. Don't export serial_logfile
or serial_logfp.
* top.c (execute_command): Don't test for serial_logfp here.
Just call serial_log_comand, and let serial.c sort it out.
* valops.c (value_of_variable): Don't attempt to establish frames
for static and global variables. This makes things work a bit
better if the stack or frame pointer is trashed.
* config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o.
* config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack
misaligned stacks during function calls.
* configure.in: work around host_alias configure bug.
AC_CANONICAL_HOST is called twice (first by AC_CHECK_TOOL
and second by AC_CANONICAL_SYSTEM). The second clobbers the
previous setting. Circumventing by moving the second check
to before the first.
* configure: regenerated
PRINTF_HAS_LONG_LONG.
* expprint.c (dump_expression): Ditto.
* configure.in: Fix check for long long support in compiler to
use a function body, not a nested function.
* configure: Rebuild with autoconf.
* configure.in: Add stdlib.h to AC_CHECK_HEADERS. Call
BFD_NEED_DECLARATION on malloc, realloc, and free.
* acconfig.h: Add NEED_DECLARATION_MALLOC,
NEED_DECLARATION_REALLOC, and NEED_DECLARATION_FREE.
* configure, config.in: Rebuild.
* defs.h: Include <stddef.h> and <stdlib.h> based on HAVE_*_H
rather than __STDC__. Only declare malloc, realloc, and free if
NEED_DECLARATION_* is defined.
C, else it's `const'.
* c-lang.c c-lang.h ch-lang.c f-lang.c language.c m2-lang.c
scm-lang.c: Microsoft C can't hack const pointers. Use CONST_PTR
macro instead.
* configure configure.in defs.h: Use AC_C_CONST to figure out if
the compiler supports const. Gets rid of some cruft in defs.h.
* dwarf2read.c: <string.h> -> "gdb_string.h"
* remote-sim.c: Add prototypes. Fix call to gdbsim_kill.
* sparcl-tdep.c (download): Add prototypes to write_routine and
start_routine args.
* mswin/gdbwin.c: Don't include both varargs.h AND stdarg.h. Get
rid of varargs.h Include string.h.
* (gdbwin_update gdbwin_fputs regs_changed_f bpt_changed_f
update): Fix prototypes, fix calls.
* (update): Return value for catch_errors.
* (run_execute_command togdb_command_from_tty togdb_command):
Cleanup catching of errors from calls to execute_command. Also,
dup command string to avoid modifying const strings.
* (togdb_breakinfo_i_init togdb_breakinfo_i_next): Use 0 instead
of NULL when see if b->address isn't set.
* (bi_disable_bpt bi_enable_bpt bi_delete_all
bi_delete_breakpoint): Add arg to calls to update.
* (gui_command): Add prototype.
* (mswin_query): Fix prototype.
* (_initialize_gdbwin): Dup string to avoid modifying const.
* (info_path togdb_get_info_path): Remove const from decls cuz
this can't be const (it points at malloc'ed memory).
* (togdb_searchpath): Remove const from path. Dup string to
avoid modifying const strings.
* rindex -> strrchr.
* (gdbwin_list_symbols): Regexp param is const.
* Fix lots of refs to psymtabs to deref correct pointers.
* (togdb_set_breakpoint_sal): Call set_breakpoint_sal with sal,
not &sal.
* mswin/gdbwin.h (togdb_searchpath togdb_get_info_path
toget_set_info_path): Fix prototypes to match reality.
* mswin/gui.cpp: Define _beginthreadex and _endthreadex routines
with proper prototypes.
* mswin/iface.cpp (gdbwin_fputs): Define with correct number of args.
* mswin/ser-win32s.c: Fix defs of min and max.
* mswin/serdll32.c (OpenComm16): Make cbInQueue and cbOutQueue be
USHORT.
* (WriteComm16): Change lpBug from LPVOID to LPCSTR.
* mswin/serdll32.h: Fix prototypes for OpenComm16 and WriteComm16.
* gdbtk.c (mainWindow): Deleted.
(cleanup_init): Don't destroy main window.
(gdbtk_init): Main window now created by Tk_Init.
* configure.in: Most X checks now handled automatically by Tk.
Use new macros to find Tcl/Tk.
* aclocal.m4: New version for new Tcl/Tk; from Don Libes.
* config.in, configure: Regenerated.
* Makefile.in (TCL, TCL_CFLAGS, TK, TK_CFLAGS, X11_CFLAGS,
X11_LDFLAGS, X11_LIBS): Changed for new Tcl and Tk.
config/sparc/tm-sparclite.h: Initialize tm_print_insn from
TM_PRINT_INSN, which comes from the tm file.
* Makefile.in (INTERNAL_LDFLAGS): Add in flags from configure.
* configure configure.in: Only make sol-thread.o for native.
Also, switch to dlopened libthread_db.so.1.
* sol-thread.c: Switch to using dlopen to get the thread_db
library.
* configure, configure.in: Change test for libthread_db to only
work for configs where build/host/target are the same.
* monitor.h,monitor.c:
Added monitor flags MO_NO_ECHO_ON_SETMEM (don't expect echo on
setmem command), MO_RUN_FIRST_TIME (if command to start process
running on target is different from one to continue execution),
MO_HEX_PREFIX (if addresses from monitor have a "0x" prefix).
* monitor.c,parse.c,sparc-tdep.c:
Don't require strings in the registers array. This is to allow
NULLs to be place holders in the tm-*.h file so that only minor
changes are needed when a new processor is introduced (eg, one
without floating point).
* sparc-tdep.c: Conditionally remove dependancies on floating point.
* sparclet-rom.c,config/sparc/sparclet.mt,config/sparc/tm-sparclet.h:
New files for target sparclet.
* symfile.c: Add option for 2nd parameter on load command : a load
offset added to the vma of each section.
* configure configure.in: Only make sol-thread.o for native.
Also, switch to dlopened libthread_db.so.1.
* sol-thread.c: Switch to using dlopen to get the thread_db
library.
* configure.in (configdirs): Force 4100 builds to use 4300 GDB
target.
* configure: Rebuild.
* config/mips/vr4300el.mt (SIM_OBS): Include simulator in
little-endian builds.
* NEWS: Add Alpha Linux as a new native configuration.
* mdebugread.c (parse_symbol): When we find a malloc() symbol with
return type VOID, assume no debugging info is available for that
object file and patch the return value into VOID *. Otherwise,
operations requiring an implicit call to malloc() will fail.
* infrun.c (wait_for_inferior): The criterion to detect entering a
sigtramp handler is now: (a) the current pc is inside a sigtramp
handler, (b) the previous pc is not in a sigtramp handler, and (c)
the current stack pointer is "inner" than the old one. Condition
(c) is new to avoid mistaking a return from a signal handler into
sigtramp as a new sigtramp invocation.
* dcache.c (struct dcache_block): Declare addr as CORE_ADDR. An
int may not be big enough to hold an address.
(dcache_hit): Ditto.
(dcache_peek_byte): Fix indentation.
* configure.in (alpha-*-linux*): Add target.
* configure: Rebuild
* config/alpha/tm-alpha.h (PROC_DESC_IS_DYN_SIGTRAMP): New macro.
(SET_PROC_DESC_IS_DYN_SIGTRAMP): Ditto.
(DYNAMIC_SIGTRAMP_OFFSET): Ditto.
(SIGCONTEXT_ADDR): Ditto.
(FRAME_PAST_SIGTRAMP_FRAME): Ditto.
* config/alpha/alpha-linux.mh: New file.
* config/alpha/alpha-linux.mt: Ditto.
* config/alpha/nm-linux.h: Ditto.
* config/alpha/tm-alphalinux.h: Ditto.
* config/alpha/xm-alphalinux.h: Ditto.
* config/alpha/xm-alphaosf.h: Renamed from xm-alpha.h.
* config/alpha/alpha-osf1.mh (XM_FILE): Change from xm-alpha.h to
xm-alphaosf.h.
* config/alpha/alpha-osf2.mh: Ditto.
* blockframe.c (find_pc_partial_function): Pass PC to
SIGTRAMP_START and SIGTRAMP_END macros for the benefit of systems
that detect sigtramp code via designated code sequences (as is the
case for Linux/Alpha, for example).
* config/i386/tm-i386bsd.h: Change SIGTRAMP_START and SIGTRAMP_END
to ignore new PC argument.
* config/m68k/tm-hp300bsd.h: Ditto.
* config/vax/tm-vax.h: Ditto.
* alpha-tdep.c (alpha_linux_sigtramp_offset): New function.
(alpha_osf_skip_sigtramp_frame): Ditto.
(push_sigtramp_desc): Ditto.
(alpha_find_saved_regs): Use SIGCONTEXT_ADDR macro to extract
sigcontext address from frame.
(alpha_saved_pc_after_call): When in sigtramp, use
alpha_frame_saved_pc() instead of read-register().
(after_prologue): When inside a dynamically generated sigtramp
function, there is no prologue, so return address of first
instruction.
(alpha_in_prologue): Fix typo in comment.
(find_proc_desc): Use macro DYNAMIC_SIGTRAMP_OFFSET to determine
whether we're inside a dynamicaly generated sigtramp function. If
so, create and push and appropriate procedure descriptor.
(alpha_frame_chain): Use macro FRAME_PAST_SIGTRAMP_FRAME to obtain
the frame past a sigtramp frame (if the current frame is indeed a
sigtramp function).
(init_extra_frame_info): Don't read next frame register off of
stack-pointer when inside a dynamiccaly generated sigtramp.
(alpha_pop_frame): Also unlink and destroy procedure descriptors
created for dynamically generated sigtramp functions.
* alpha-nat.c: When compiling under Linux, include <asm/reg.h> and
<alpha/ptrace.h> instead of <machine/reg.h>
config/sparc/nm-sun4sol2.h config/sparc/sun4sol2.mh
config/sparc/tm-sun4sol2.h: Use autoconf to config Solaris thread
and pthread support, since pre-2.5 systems don't come with
libthread_db.so.1.
* procfs.c (info_proc): Use int instead of id_t. Old versions of
Irix don't see to define this.
* configure.in (AC_CHECK_FUNCS): Also check for sbrk.
* configure: Regenerate with autoconf.
* config.in: Regenerate with autoheader.
* main.c (main): Only use sbrk() when HAVE_SBRK is defined.
* top.c (command_loop): Ditto.
* configure.in (AC_CHECK_HEADERS): check for endian.h.
Use AC_CHECK_TOOL to find AR & RANLIB. Add AC_PROG_AWK.
Add host & target cases for i[345]86-*-gnu*.
* config.in: Regenerate with autoheader.
* configure: Regenerate with autoconf.
* Makefile.in (AR, AWK): Set from corresponding autoconf substs.
(init.c): Don't scan mig-generated files.
* defs.h (endian.h): Include if HAVE_ENDIAN_H defined.
* config/nm-m3.h (ATTACH_NO_WAIT): Define.
* infcmd.c (attach_command): Use "#ifndef ATTACH_NO_WAIT"
rather than "#ifndef MACH".
* configure: Regenerate.
From: Robert Lipe <robertl@dgii.com>
Add support for SCO OpenServer 5 (a.k.a. 3.2v5*) This
target is an SVR3.2 with COFF, ELF, and shared libes, but
no /proc.
* config/i386/i386sco5.mh: New file.
* config/i386/nm-i386sco5.h: New file.
* config.in: Regenerate with autoheader.
* configure: Regenerate with autoconf.
* inflow.c (_initialize_inflow): Only try to use _SC_JOB_CONTROL
if it is actually defined.
(gdb_setpgid): Use HAVE_SETPGID.
* ch-exp.c: Change include of <string.h> to "gdb_string.h".
* c-exp.y: Ditto.
* f-exp.y: Ditto.
* m2-exp.y: Ditto.
* c-exp.y: Include <ctype.h>.
* serial.c: Ditto.
* config/m68k/nm-news.h: Add typedef for pid_t which is
apparently missing from <sys/types.h>. Enclose entire
file in NM_NEWS_H ifndef and define when included.
* config/mips/nm-news-mips.h: Ditto.
* config/m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL,
REGISTER_CONVERT_TO_RAW): Change name of temporary variable.
long doubles or not and define PRINTF_HAS_LONG_DOUBLE if so.
* acconfig.h: Provide default undef for PRINTF_HAS_LONG_DOUBLE.
* configure: Regenerate.
* valprint.c (print_floating): Use PRINTF_HAS_LONG_DOUBLE.
* c-exp.y (parse_number): Use PRINTF_HAS_LONG_DOUBLE.
* configure.in: Fix have_gregset and have_fpregset autoconf
variable names so that they match the pattern required to
cache them.
* configure.in: Call AC_CONFIG_HEADER with config.h:config.in.
Change CONFIG_HEADERS test in AC_OUTPUT accordingly.
* configure: Rebuild.
* Makefile.in (stamp-h): Depend upon config.in, not config.h.in.
Set CONFIG_HEADERS to config.h:config.in.
The file name config.h.in can be used on DOS filesystems.
From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
* configure.in (AC_CHECK_HEADERS): Check for link.h.
* configure: Regenerate with autoconf.
* config.h.in: Regenerate with autoheader.
* config/i386/nm-linux.h: Include solib.h only if HAVE_LINK_H
is defined.
* solib.c: Exclude most of the code if HAVE_LINK_H is not defined.
* config/i386/linux.mh: Reinstate XM_CLIBS, it is needed for
older a.out based systems.
* configure.in (AC_CONFIG_HEADER): Add, generate config.h.
* configure: Regenerate.
* Makefile.in (defs_h): Add config.h
* defs.h (config.h): Include before any other includes or defines.
* i386-tdep.c (gdb_string.h): Move include after include of defs.h.
* monitor.c (monitor_debug): Change remotedebug to buffer strings.
* monitor.c (monitor_open): Add test for flag MO_NO_ECHO_ON_OPEN before
epecting prompt and echo during open.
* monitor.c (monitor_stop): Add test for flag MO_SEND_BREAK_ON_OPEN to
determine if break should be sent as stop command.
* monitor.h: Add flags MO_NO_ECHO_ON_OPEN and MO_SEND_BREAK_ON_OPEN.
* i960-tdep.c (mon960_frame_chain_valid): New function for getting
stack frame on mon960.
* Makefile.in: Add mon960 files.
* configure.in: Changed i960-*-coff* and i960-*-elf* to target mon960;
added i960-nindy-coff* and i960-nindy-elf* for target nindy.
* configure: Regenerated.
* config/i960/mon960.mt, config/i960/tm-mon960.h: New files;
support mon960 rom monitor on i960.
