* gas/mips/mips5.d: New test.
* gas/mips/mips5.l: New test stderr listing.
* gas/mips/mips5.s: New test source file.
* gas/mips/mips.exp: Run the mips5 test.
2003-04-02 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (macro2): Adjust implementation of
M_ULH, M_ULHU, M_ULW, and M_ULD so that they work properly
in the case where the source and destination registers
are the same.
[ gas/testsuite/ChangeLog ]
2003-04-02 Chris Demetriou <cgd@broadcom.com>
* gas/mips/ulh.d: Adjust for ulh and ulhu macro assembly changes.
* gas/mips/mips.exp: Define new "gpr_ilocks" architecture
property, and add it to mips2 (and later) chips and r3900.
* gas/mips/uld2.s: New test source file.
* gas/mips/ulh2.s: Likewise.
* gas/mips/ulw2.s: Likewise.
* gas/mips/uld2.l: New test stderr listing.
* gas/mips/ulh2.l: Likewise.
* gas/mips/ulw2.l: Likewise.
* gas/mips/uld2-eb.d: New test.
* gas/mips/uld2-el.d: Likewise.
* gas/mips/ulh2-eb.d: Likewise.
* gas/mips/ulh2-el.d: Likewise.
* gas/mips/ulw2-eb-ilocks.d: Likewise.
* gas/mips/ulw2-eb.d: Likewise.
* gas/mips/ulw2-el-ilocks.d: Likewise.
* gas/mips/ulw2-el.d: Likewise.
* gas/mips/mips.exp: Run new tests for appropriate architectures.
* config/tc-mips.c (reloc_needs_lo_p): New function.
(fixup_has_matching_lo_p): New function.
(append_insn): Use reloc_needs_lo_p to check whether a relocation
might need a matching %lo(). Reuse the head of mips_hi_fixup_list
if that fixup already has a matching %lo(). Don't call frag_wane here.
(macro): Call frag_wane here if the last unmatched hi was in the
current frag.
(pic_need_relax): New function, split out from...
(md_estimate_size_before_relax): ...here.
(mips_frob_file): Use reloc_needs_lo_p. Use pic_need_relax to test
whether BFD_RELOC_MIPS_GOT16 fixups refer to global symbols.
gas/testsuite/
* gas/mips/rel12.[sd], gas/mips/rel13.[sd]: New tests.
* gas/mips/mips.exp: Run them.
* config/tc-mips.c (enum small_ex_type): Remove.
(imm_unmatched_hi): Remove.
(md_assemble): Remove use of imm_unmatched_hi. Remove the last
argument from calls to append_insn.
(append_insn): Remove unmatched_hi parameter; check reloc_type[0]
instead.
(macro_build): Update append_insn calls.
(mips16_macro_build, macro_build_lui): Likewise.
(mips_ip): Rework handling of small expressions. Move explicit
relocation handling into my_getSmallExpression. Assume that the
value of 'o' operands is zero if there is only one bracketed
expression left.
(percent_op): Make constant. Record the BFD relocation code
associated with each operator.
(my_getSmallParser, my_getPercentOp): Remove.
(parse_relocation): New function.
(my_getSamllExpression): Rework. Fill in relocations here
rather than in mips_ip.
gas/testsuite
* gas/mips/elf-rel8.[sd], gas/mips/elf-rel9.[sd],
gas/mips/elf-rel10.[sd], gas/mips/elf-rel11.[sd]: New tests.
* gas/mips/mips.exp: Run elf-rel8 and elf-rel9 for all elf
targets. Run elf-rel10 and elf-rel11 for NewABI targets.
2003-01-02 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c: Update copyright years to include 2003.
(mips_ip): Fix indentation of "+A", "+B", and "+C" handling.
Additionally, clean up their code slightly and clean up their
comments some more.
* doc/c-mips.texi: Add MIPS32r2 to ".set mipsN" documentation.
[ gas/testsuite/ChangeLog ]
2003-01-02 Chris Demetriou <cgd@broadcom.com>
* gas/mips/elf_arch_mips32r2.d: Fix file description comment.
[ include/opcode/ChangeLog ]
2003-01-02 Chris Demetriou <cgd@broadcom.com>
* mips.h: Update copyright years to include 2002 (which had
been missed previously) and 2003. Make comments about "+A",
"+B", and "+C" operand types more descriptive.
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (validate_mips_insn, mips_ip): Recognize
the "+D" operand, which will be used only by the disassembler.
[ gas/testsuite/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0sel-names-mips32.d: New test.
* gas/mips/cp0sel-names-mips32r2.d: New test.
* gas/mips/cp0sel-names-mips64.d: New test.
* gas/mips/cp0sel-names-numeric.d: New test.
* gas/mips/cp0sel-names-sb1.d: New test.
* gas/mips/cp0sel-names.s: New test source file.
* gas/mips/mips.exp: Run new tests.
[ include/opcode/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* mips.h: Note that the "+D" operand type name is now used.
[ opcodes/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0sel_name): New structure.
(mips_cp0sel_names_mips3264, mips_cp0sel_names_mips3264r2)
(mips_cp0sel_names_sb1): New arrays.
(mips_arch_choice): New structure members "cp0sel_names" and
"cp0sel_names_len".
(mips_arch_choices): Add references to new cp0sel_names arrays
as appropriate, and make all existing entries reference
appropriate mips_XXX_names_numeric arrays rather than simply
using NULL.
(mips_cp0sel_names, mips_cp0sel_names_len): New variables.
(lookup_mips_cp0sel_name): New function.
(set_default_mips_dis_options): Set mips_cp0sel_names and
mips_cp0sel_names_len as appropriate. Remove now-unnecessary
checks for NULL register name arrays.
(parse_mips_dis_option): Likewise.
(print_insn_arg): Handle "+D" operand type.
* mips-opc.c (mips_builtin_opcodes): Add new "+D" variants
of mfc0, mtc0, dmfc0, and dmtc0 to print CP0+sel register
names symbolically.
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* gas/mips/elf_arch_mips1.d: New test.
* gas/mips/elf_arch_mips2.d: New test.
* gas/mips/elf_arch_mips3.d: New test.
* gas/mips/elf_arch_mips4.d: New test.
* gas/mips/elf_arch_mips5.d: New test.
* gas/mips/elf_arch_mips32.d: New test.
* gas/mips/elf_arch_mips32r2.d: New test.
* gas/mips/elf_arch_mips64.d: New test.
* gas/mips/empty.s: New test source file.
* gas/mips/mips.exp: Run new tests.
* gas/mips/elf_ase_mips16.d: Change to use empty.s
* gas/mips/elf_ase_mips16.s: Remove.
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* aoutx.h (NAME(aout,machine_type)): Add bfd_mach_mipsisa32r2 case.
* archures.c (bfd_mach_mipsisa32r2): New define.
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsisa32r2): New enum value.
(arch_info_struct): Add entry for I_mipsisa32r2.
* elfxx-mips.c (elf_mips_isa, _bfd_elf_mips_mach)
(_bfd_mips_elf_print_private_bfd_data): Handle E_MIPS_ARCH_32R2.
(_bfd_mips_elf_final_write_processing): Add
bfd_mach_mipsisa32r2 case.
(_bfd_mips_elf_merge_private_bfd_data): Handle merging of
binaries marked as using MIPS32 Release 2.
[ binutils/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* doc/binutils.texi (objdump): Note MIPS HWR (Hardware Register)
changes in MIPS -M options.
[ gas/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* configure.in: Recognize mipsisa32r2, mipsisa32r2el, and
CPU variants.
* configure: Regenerate.
* config/tc-mips.c (ISA_HAS_DROR, ISA_HAS_ROR): New defines.
(macro_build): Handle "K" operand.
(macro2): Use ISA_HAS_DROR and ISA_HAS_ROR in the places where
CPU_HAS_DROR and CPU_HAS_ROR are currently used.
(mips_ip): New variable "lastpos", and implement "+A", "+B",
and "+C" operands for MIPS32 Release 2 ins/ext instructions.
Implement "K" operand for MIPS32 Release 2 rdhwr instruction.
(validate_mips_insn): Implement "+" as a way to extend the
allowed operands, and implement "K", "+A", "+B", and "+C"
operands.
(OPTION_MIPS32R2): New define.
(md_longopts): Add entry for OPTION_MIPS32R2.
(OPTION_ELF_BASE): Adjust to accomodate OPTIONS_MIPS32R2.
(md_parse_option): Handle OPTION_MIPS32R2.
(s_mipsset): Reimplement handling of ".set mipsN" options
and add support for ".set mips32r2".
(mips_cpu_info_table): Add entry for "mips32r2" (MIPS32 Release 2).
(md_show_usage): Document "-mips32r2" option.
* doc/as.texinfo: Document "-mips32r2" option.
* doc/c-mips.texi: Likewise.
[ gas/testsuite/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0-names-mips32r2.d: New test.
* gas/mips/hwr-names-mips32r2.d: New test.
* gas/mips/hwr-names-numeric.d: New test.
* gas/mips/hwr-names.s: New test source file.
* gas/mips/mips32r2.d: New test.
* gas/mips/mips32r2.s: New test source file.
* gas/mips/mips32r2-ill.l: New test.
* gas/mips/mips32r2-ill.s: New test source file.
* gas/mips/mips.exp: Add mips32r2 architecture data array
entry. Run new tests mentioned above.
[ include/elf/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h (E_MIPS_ARCH_32R2): New define.
[ include/opcode/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h: Document "+" as the start of two-character operand
type names, and add new "K", "+A", "+B", and "+C" operand types.
(OP_MASK_INSMSB, OP_SH_INSMSB, OP_MASK_EXTMSB)
(OP_SH_EXTMSB, INSN_ISA32R2, ISA_MIPS32R2, CPU_MIPS32R2): New
defines.
[ opcodes/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0_names_mips3264r2, mips_hwr_names_numeric)
(mips_hwr_names_mips3264r2): New arrays.
(mips_arch_choice): New "hwr_names" member.
(mips_arch_choices): Adjust for structure change, and add a new
entry for "mips32r2" ISA.
(mips_hwr_names): New variable.
(set_default_mips_dis_options): Set mips_hwr_names.
(parse_mips_dis_option): New "hwr-names" option which sets
mips_hwr_names, and adjust "reg-names=ARCH" to set mips_hwr_names.
(print_insn_arg): Change return type to "int"
and use that to indicate number of characters consumed.
Add support for "+" operand extension character, "+A", "+B",
"+C", and "K" operands.
(print_insn_mips): Adjust for changes to print_insn_arg.
(print_mips_disassembler_options): Adjust for "hwr-names"
addition and "reg-names" change.
* mips-opc (I33): New define (shorthand for INSN_ISA32R2).
(mips_builtin_opcodes): Note that "nop" and "ssnop" are special
forms of "sll". Add new MIPS32 Release 2 instructions: ehb,
di, ei, ext, ins, jr.hb, jalr.hb, mfhc1, mfhc2, mthc1, mthc2,
rdhwr, rdpgpr, seb, seh, synci, wrpgpr, wsbh.
Note that hardware rotate instructions (ror, rorv) can be
used on MIPS32 Release 2, and add the official mnemonics
for them (rotr, rotrv) and the similar "rotl" mnemonic for
left-rotate.
* gas/mips/mips.exp: Define the notion of an "architecture data
array," add comments indicating how to add a new architecture and
suggestions for adding new tests. Populate the architecture data
array with many known architectures and convert many tests to
be run for multiple architectures.
(mips_arches): New global array.
(mips_arch_create, mips_arch_list_all, mips_arch_data)
(mips_arch_displayname, mips_arch_properties)
(mips_arch_as_flags, mips_arch_objdump_flags, mips_arch_matches)
(mips_arch_list_matching): New functions to operate on mips_arches.
(run_dump_test_arch, run_dump_test_arches, run_list_test_arch)
(run_list_test_arches): New functions.
(run_list_test): Document and add an optional "test name" argument.
* gas/mips/abs.d: Remove CPU-specific assembler and objdump flags,
and CPU names from test names.
* gas/mips/add.d: Likewise.
* gas/mips/and.d: Likewise.
* gas/mips/dli.d: Likewise.
* gas/mips/jal-empic-elf-2.d: Likewise.
* gas/mips/jal-empic-elf-3.d: Likewise.
* gas/mips/jal-empic-elf.d: Likewise.
* gas/mips/lb-svr4pic.d: Likewise.
* gas/mips/lb.d: Likewise.
* gas/mips/mips32.d: Likewise.
* gas/mips/mips4.d: Likewise.
* gas/mips/mips64.d: Likewise.
* gas/mips/rol-hw.d: Likewise.
* gas/mips/rol.d: Likewise.
* gas/mips/rol64-hw.d: Likewise.
* gas/mips/rol64.d: Likewise.
* gas/mips/elf-jal.d: Likewise. Also, indicate ELF in test name.
* gas/mips/mips64-mdmx.d: Tweak printed name to indicate that this
test uses the -mdmx flag.
* gas/mips/mips64-mips3d.d: Tweak printed name to indicate that
this test uses the -mips3d flag.
* gas/mips/mips64-mips3d-incl.d: New file.
2002-12-18 Chris Demetriou <cgd@broadcom.com>
* mips-opc.c (mips_builtin_opcodes): Remove one "ror" and two
"dror" entries, and reorder the remaining "dror" and "ror" entries.
[ gas/ChangeLog ]
2002-12-18 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (macro): In M_DROL, M_DROR, M_ROL, and M_ROR,
use hardware rotate ops as appropriate. In M_DROL_I, M_DROR_I,
M_ROL_I, and M_ROR_I, simplify code, clean up warnings, and
arrange not to issue warnings about use of AT when AT is not
actually used.
[ gas/testsuite/ChangeLog ]
2002-12-18 Chris Demetriou <cgd@broadcom.com>
* gas/mips/rol.s: Add ".set noat" and some new instructions to test.
* gas/mips/rol64.s: Likewise.
* gas/mips/rol.l: New file.
* gas/mips/rol.d: Adjust to use rol.l and for rol.s changes.
* gas/mips/rol64.l: New file.
* gas/mips/rol64.d: Adjust to use rol64.l and for rol64.s changes.
* gas/mips/rol-hw.d: New file.
* gas/mips/rol-hw.l: New file.
* gas/mips/rol64-hw.d: New file.
* gas/mips/rol64-hw.l: New file.
* gas/mips/mips.exp: Run rol-hw and rol64-hw tests.
(gas_m68hc11_warning): New function.
(gas_m68hc11_message): New function.
(top): New tests for assembler errors.
(gas_m68hc11_opcode_list): New function.
(top): New tests for opcode list.
(ia64_gen_real_reloc_type): Handle it.
(pseudo_func): Add @ltoffx.
(md_begin): Build .<ltoffx>.
(ia64_force_relocation): True for LTOFF22X and LDXMOV.
* gas/ia64/ltoff22x-1.[ds]: New.
* gas/ia64/ia64.exp: Run it.
can find the real symbol and not a gas internal debug symbol.
* gas/m68hc11/insns.d: Update.
* gas/m68hc11/insns-dwarf2.d: Update.
* gas/m68hc11/insns12.d: Update.
* gas/m68hc11/opers12.s (min5b, min9b): Use 16 and -256 for the min.
* gas/m68hc11/opers12.d: Update after indexed offset operand fixes.
* gas/m68hc11/opers12-dwarf2.d: Likewise.
can find the real symbol and not a gas internal debug symbol.
* gas/m68hc11/insns.d: Update.
* gas/m68hc11/insns-dwarf2.d: Update.
* gas/m68hc11/insns12.d: Update.
* gas/m68hc11/opers12.s (min5b, min9b): Use 16 and -256 for the min.
* gas/m68hc11/opers12.d: Update after indexed offset operand fixes.
* gas/m68hc11/opers12-dwarf2.d: Likewise.
parameters. Added support for new opcode-list format. General
error message fixups.
(c4x_inst_add): Reject insn not for our CPU
(md_begin): Added matrix for setting the proper opcode-level &
device-flags according to cpu type and revision. Rewrite the
opcode hasher.
(c4x_operand_parse): Fix opcode bug
(c4x_operands_match): New function argument. Added dry-run
mechanism, that is optional error generation. Added constraint 'i'
and 'j'.
(c4x_insn_check): Added new function for post-verification of the
generated insn.
(md_assemble): Check all opcodes before croaking because of an
argument mismatch. Need this to be able to fully support
ortogonally arguments.
(md_parse_options): Revised commandprompt swicthes and added new
ones.
(md_show_usage): Complete rewrite of printout.
* gas/testsuite/gas/tic4x/addressing.s: Fix bug in one insn
* gas/testsuite/gas/tic4x/addressing_c3x.d: Update thereafter
* gas/testsuite/gas/tic4x/addressing_c4x.d: Update thereafter
* gas/testsuite/gas/tic4x/allopcodes.S: Add support for new
opclass.h changes
* gas/testsuite/gas/tic4x/opclasses.h: Added testsuites for
the new enhanced opcodes.
* gas/testsuite/gas/tic4x/opcodes.s: Regenerate
* gas/testsuite/gas/tic4x/opcodes_c3x.d: Update from above
* gas/testsuite/gas/tic4x/opcodes_c4x.d: Update from above
* gas/testsuite/gas/tic4x/opcodes_new.d: Added new testsuite for
the enhanced and special insns.
* gas/testsuite/gas/tic4x/tic4x.exp: Added the opcodes_new testsuite
* include/opcode/tic4x.h: File reordering. Added enhanced opcodes.
* opcodes/tic4x-dis.c: Added support for enhanced and special
insn.
(c4x_print_op): Added insn class 'i' and 'j'
(c4x_hash_opcode_special): Add to support special insn
(c4x_hash_opcode): Update to support the new opcode-list
format. Add support for the new special insns.
(c4x_disassemble): New opcode-list support.
(sh_force_relocation): Use sh_local_pcrel.
(md_pcrel_from_section): Check the relocation type whether it
should be resolved locally. Use S_FORCE_RELOC.
* testsuite/gas/sh/pcrel2.d: Check code also.
* doc/c-mips.texi: Add entries for -march=vr4120,vr4130,vr4181,
vr5400 and vr5500. Add entry for -mfix-vr4122-bugs.
* config/tc-mips.c (CPU_HAS_DROR, CPU_HAS_ROR): New macros.
(hilo_interlocks): True for CPU_VR5500.
(gpr_interlocks, cop_interlocks): True for CPU_VR5400 and CPU_VR5500.
(mips_fix_vr4122_bugs): New.
(append_insn): Work around 4122 errors if mips_fix_vr4122_bugs.
(mips_emit_delays): Likewise.
(macro2) [M_DROLI]: Use dror or dror32 if CPU_HAS_DROR.
[M_ROLI]: Likewise ror if CPU_HAS_ROR.
(validate_mips_insn, mips_ip): Handle '[', ']', 'e' and '%'.
(OPTION_FIX_VR4122, OPTION_NO_FIX_VR4122): New options.
(md_longopts): Add -mfix-vr4122-bugs and -no-mfix-vr4122-bugs.
(OPTION_ELF_BASE): Bump.
(md_parse_option): Handle the new options.
(mips_cpu_info_table): Add entries for vr4120, vr4130, vr4181,
vr5400 and vr5500.
[gas/testsuite/]
* gas/mips/mips4100.[sd]: Move dmadd16 and madd16 checks to...
* gas/mips/vr4111.[sd]: ...this new test.
* gas/mips/vr4120.[sd],
* gas/mips/vr4122.[sd],
* gas/mips/vr5400.[sd],
* gas/mips/vr5500.[sd]: New tests.
* mips.exp: Run them.
* config/tc-sh.c (sh_force_relocation): Return 0 for
some PC relative relocations when not relaxing.
* testsuite/gas/sh/pcrel2.s: New.
* testsuite/gas/sh/pcrel2.d: New.
* testsuite/gas/sh/basic.exp: Add pcrel2 test.
* reloc.c (BFD_RELOC_386_TLS_TPOFF, BFD_RELOC_386_TLS_IE,
BFD_RELOC_386_TLS_GOTIE): Add.
* bfd-in2.h, libbfd.h: Rebuilt.
* elf32-i386.c (elf_howto_table): Add R_386_TLS_TPOFF, R_386_TLS_IE
and R_386_TLS_GOTIE.
(elf_i386_reloc_type_lookup): Handle it.
(struct elf_i386_link_hash_entry): Change tls_type type to unsigned
char instead of enum, change GOT_* into defines.
(GOT_TLS_IE_POS, GOT_TLS_IE_NEG, GOT_TLS_IE_BOTH): Define.
(elf_i386_tls_transition): Handle R_386_TLS_IE and R_386_TLS_GOTIE.
(elf_i386_check_relocs): Likewise. Avoid crash if local symbol is
accessed both as normal and TLS symbol. Move R_386_TLS_LDM and
R_386_PLT32 cases so that R_386_TLS_IE can fall through.
Handle R_386_TLS_LE_32 and R_386_TLS_LE in shared libs.
(elf_i386_gc_sweep_hook): Handle R_386_TLS_IE and R_386_TLS_GOTIE.
Handle R_386_TLS_LE_32 and R_386_TLS_LE in shared libs.
(allocate_dynrelocs): Allocate 2 .got and 2 .rel.got entries if
tls_type is GOT_TLS_IE_BOTH.
(elf_i386_size_dynamic_sections): Likewise.
(elf_i386_relocate_section): Handle R_386_TLS_IE and R_386_TLS_GOTIE.
Handle R_386_TLS_LE_32 and R_386_TLS_LE in shared libs.
(elf_i386_finish_dynamic_symbol): Use tls_type & GOT_TLS_IE to catch
all 4 GOT_TLS_* TLS types.
gas/
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_386_TLS_IE and BFD_RELOC_386_TLS_GOTIE.
(BFD_RELOC_386_TLS_IE, BFD_RELOC_386_TLS_GOTIE): Define to 0
if not defined.
(lex_got): Handle @GOTNTPOFF and @INDNTPOFF.
(md_apply_fix3, tc_gen_reloc): Handle BFD_RELOC_386_TLS_IE and
BFD_RELOC_386_TLS_GOTIE.
gas/testsuite/
* gas/i386/tlspic.s: Add tests.
* gas/i386/tlspic.d: Regenerated.
* gas/i386/tlsnopic.s: Add tests.
* gas/i386/tlsnopic.d: Regenerated.
include/
* elf/i386.h (R_386_TLS_TPOFF, R_386_TLS_IE, R_386_TLS_GOTIE):
Define.
ld/testsuite/
* ld-i386/i386.exp: New.
* ld-i386/tlsbin.dd: New test.
* ld-i386/tlsbinpic.s: New test.
* ld-i386/tlsbin.rd: New test.
* ld-i386/tlsbin.s: New test.
* ld-i386/tlsbin.sd: New test.
* ld-i386/tlsbin.td: New test.
* ld-i386/tlslib.s: New test.
* ld-i386/tlsnopic1.s: New test.
* ld-i386/tlsnopic2.s: New test.
* ld-i386/tlsnopic.dd: New test.
* ld-i386/tlsnopic.rd: New test.
* ld-i386/tlsnopic.sd: New test.
* ld-i386/tlspic1.s: New test.
* ld-i386/tlspic2.s: New test.
* ld-i386/tlspic.dd: New test.
* ld-i386/tlspic.rd: New test.
* ld-i386/tlspic.sd: New test.
* ld-i386/tlspic.td: New test.
branch type relocs.
(alpha_force_relocation): Don't special-case branch type relocs.
* gas/alpha/elf-reloc-7.s: New.
* gas/alpha/elf-reloc-7.d: New.
* gas/alpha/alpha.exp: Run it.
2002-09-18 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (md_apply_fix3): Just return for BFD_RELOC_8.
[ gas/testsuite/ChangeLog ]
2002-09-18 Chris Demetriou <cgd@broadcom.com>
* gas/mips/baddata1.s: New file.
* gas/mips/baddata1.l: New file.
* gas/mips/mips.exp: Run new test.
2002-09-18 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (IS_SEXT_32BIT_NUM): Move closer to top of file.
(IS_SEXT_16BIT_NUM): New macro.
(macro_build_ldst_constoffset): New function, to build a set of
instructions to do a load or store from a constant offset relative
to a given register.
(macro, s_cprestore): Use macro_build_ldst_constoffset to implement
.cprestore pseudo-op.
[ gas/testsuite/ChangeLog ]
2002-09-18 Chris Demetriou <cgd@broadcom.com>
* gas/mips/mips-abi32-pic2.s: New file.
* gas/mips/mips-abi32-pic2.d: New file.
* gas/mips/mips.exp: Run new test.
[ plus, fixed date on prev. gas/testsuite/ChangeLog entry. ]
2002-09-18 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (md_apply_fix3): Just return for BFD_RELOC_8.
[ gas/testsuite/ChangeLog ]
2002-09-18 Chris Demetriou <cgd@broadcom.com>
* gas/mips/baddata1.s: New file.
* gas/mips/baddata1.l: New file.
* gas/mips/mips.exp: Run new test.
2002-09-18 Chris Demetriou <cgd@broadcom.com>
* gas/mips/branch-misc-1.d: New file.
* gas/mips/branch-misc-1.s: New file.
* gas/mips/branch-misc-2.s: New file.
* gas/mips/branch-misc-2.d: New file.
* gas/mips/mips.exp: Run new tests.
[ ld/testsuite/ChangeLog ]
2002-09-18 Chris Demetriou <cgd@broadcom.com>
* ld-mips-elf/branch-misc-1.d: New file.
* ld-mips-elf/branch-misc-2.d: New file.
* ld-mips-elf/mips-elf.exp: Run new tests.
* config/tc-mips.c (macro2): Implement rotates by zero using shifts
by zero.
[gas/testsuite]
* gas/mips/rol.s: Add rotate by zero tests.
* gas/mips/rol.d: Update accordingly.
* gas/mips/rol64.d: Expect rotates by zero to use dsrl.
* gas/d30v/guard-debug.d: Use -gstabs rather than -g.
* gas/elf/ehopt0.s: Don't use "$" in labels.
* gas/ieee-fp/x930509a.exp: Don't test c30.
* gas/m68hc11/malis.d: Adjust -I so that test runs when not building
in source dir.
* gas/mri/mri.exp: Don't run on "m68hc*".
* gas/sh/basic.exp (do_fp): Match LE too.
(pcrel-coff): Run this version for "sh*-pe*" and rename "sh*-hms" to
"sh*-rtems".
* gas/sh/pcrel-coff.d: Add -EB to objdump flags.
* gas/vtable/vtable.exp: Don't run on linuxecoff. setup_xfail in
preference to not running on ELF targets that might one day pass.
Add more xfails. Add more targets to the REL list.
* gas/m68hc11/insns12.s: New file to test specific 68HC12 insns.
* gas/m68hc11/insns12.d: New file.
* gas/m68hc11/branchs12.s: New test.
* gas/m68hc11/branchs12.d: New test.
* gas/m68hc11/all_insns.d: Dump the relocs to verify that they
are against symbols and not sections (for linker relaxation).
* gas/m68hc11/insns-dwarf2.d: Likewise.
* gas/m68hc11/insns.d: Likewise.
* gas/m68hc11/lbranch.d: Likewise.
* gas/m68hc11/lbranch-dwarf2.d: Likewise.
* gas/m68hc11/opers12.d: Likewise.
* gas/m68hc11/opers12-dwarf2.d: Likewise.
* config/tc-mips.c (mips_ip): Don't work out the value of
constant %hi()s here.
[gas/testsuite/]
* gas/mips/elf-consthilo.[sd]: New test.
* gas/mips/mips.exp: Run it.
immediate offset in "dla" and "la" expansions.
* gas/mips/empic.d: Treat "addiu" and "daddiu" as equivalent when
$0 is source.
* mips-opc.c (mips_builtin_opcodes): Remove "dla" and "la" as
aliases to "daddiu" and "addiu".
at start of insn, pass it to output_disp and output_imm.
(output_disp): Added arguments. If _GLOBAL_OFFSET_TABLE_ is seen
in displacement for R_386_32 reloc, use R_386_GOTPC and compute
properly addend.
(output_imm): Added arguments. Compute properly addend for
R_386_GOTPC.
(md_apply_fix3): Remove R_386_GOTPC handling.
* testsuite/gas/i386/gotpc.s: New.
* testsuite/gas/i386/gotpc.d: New.
* testsuite/gas/i386/i386.exp: Add gotpc test.
* config/tc-mips.c (tc_gen_reloc): Extend GP-relative addend
handling to BFD_RELOC_MIPS16_GPREL.
[gas/testsuite/]
* gas/mips/elf-rel6.[sd]: New test.
* gas/mips/mips.exp: Run it.
2002-07-26 Chris Demetriou <cgd@broadcom.com>
* gas/mips/elf_ase_mips16.d: New file to test ELF MIPS16 ASE marking.
* gas/mips/elf_ase_mips16.s: Likewise.
* gas/mips/mips.exp: Run the new test.
[ ld/testsuite/ChangeLog ]
2002-07-26 Chris Demetriou <cgd@broadcom.com>
* ld-mips-elf/mips16-1.d: Check that ASE flag is actually set.
* doc/c-mips.texi: Remove -mcpu. Document -mabi.
* configure.in (MIPS_CPU_STRING_DEFAULT): New configuration macro.
(USE_E_MIPS_ABI_O32, MIPS_DEFAULT_64BIT): New configuration macros.
* configure, config.in: Regenerate.
* config/tc-mips.c (file_mips_abi): Rename to mips_abi.
(mips_set_options): Remove "abi" field.
(mips_opts): Update accordingly. Replace all uses of mips_opts.abi
with mips_abi.
(mips_cpu): Remove.
(mips_arch_string, mips_arch_info): New vars.
(mips_tune_string, mips_tune_info): New vars.
(ABI_NEEDS_32BIT_REGS, ABI_NEEDS_64BIT_REGS): New macros.
(HAVE_32BIT_GPRS, HAVE_32BIT_FPRS): Don't check the ABI.
(mips_isa_to_str, mips_cpu_to_str): Remove.
(mips_ip): If the selected architecture is a generic ISA rather
than a processor, only mention the ISA level in error messages.
(OPTION_MCPU): Remove.
(OPTION_FP64): New.
(md_longopts): Add -mfp64, remove -mcpu.
(mips_set_option_string): New fn.
(md_parse_option): Make -mipsN update file_mips_isa rather than
mips_opts.isa. Use mips_set_option_string to set -march or -mtune.
Don't let -mgp32 and -mfp32 change the ABI.
(show): Move to end of file. Constify string argument.
(md_show_usage): Move to the end of the file. Read available
architectures from mips_cpu_info_table.
(mips_set_architecture): New fn.
(mips_after_parse_args): Rework. Remove -mcpu handling. -mipsN
is an alias for -march=mipsN. Don't change the ABI based on other
flags. Infer the register size from the ABI as well as the
architecture. Complain about more conflicting arguments.
Unify logic with GCC.
(s_mipsset): Don't change the ABI.
(mips_elf_final_processing): Check USE_E_MIPS_ABI_O32.
(mips_cpu_info_table): Remove Generic-MIPS* entries, keeping just
"mipsN"-type entries. Remove entries that vary only in the
manufacturer's prefix, or that have "000" replaced by "k".
Remove TARGET_CPU entries. Make r2000 entry use CPU_R3000.
(mips_strict_matching_cpu_name_p, mips_matching_cpu_name_p): New fns.
(mips_parse_cpu): New fn.
(mips_cpu_info_from_name, mips_cpu_info_from_cpu): Remove.
(mips_cpu_info_from_isa): Minor formatting tweak.
[gas/testsuite]
* gas/mips/mips-gp32-fp64.d,
* gas/mips/mips-gp32-fp64-pic.d: Add -mfp64.
2002-05-31 Chris G. Demetriou <cgd@broadcom.com>
Ed Satterthwaite <ehs@broadcom.com>
* mips-opc.c: Add support for SB-1 MDMX subset and extensions.
[ gas/testsuite/ChangeLog ]
2002-05-31 Chris G. Demetriou <cgd@broadcom.com>
* gas/mips/sb1-ext-mdmx.s: New file.
* gas/mips/sb1-ext-mdmx.d: Likewise.
* gas/mips/mips.exp: Run new "sb1-ext-mdmx" test.
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
Ed Satterthwaite <ehs@broadcom.com>
* config/tc-mips.c (mips_set_options): New "ase_mdmx" member.
(mips_opts): Initialize "ase_mdmx" member.
(file_ase_mdmx): New variable.
(CPU_HAS_MDMX): New macro.
(md_begin): Initialize mips_opts.ase_mdmx and file_ase_mdmx
based on command line options and configuration defaults.
(macro_build): Note in comment that use of MDMX in macros is
not currently allowed.
(validate_mips_insn): Add support for the "O", "Q", "X", "Y", and
"Z" MDMX operand types.
(mips_ip): Accept MDMX instructions if mips_opts.ase_mdmx is set,
and add support for the "O", "Q", "X", "Y", and "Z" MDMX operand
types.
(OPTION_MDMX, OPTION_NO_MDMX, md_longopts, md_parse_option):
Add support for "-mdmx" and "-no-mdmx" options.
(OPTION_ELF_BASE): Move to accomodate new options.
(s_mipsset): Support ".set mdmx" and ".set nomdmx".
(mips_elf_final_processing): Set MDMX ASE ELF header flag if
file_ase_mdmx was set.
* doc/as.texinfo: Document -mdmx and -no-mdmx options.
* doc/c-mips.texi: Likewise, and document ".set mdmx" and ".set
nomdmx" directives.
[ gas/testsuite/ChangeLog ]
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
* gas/mips/mips64-mdmx.s: New file.
* gas/mips/mips64-mdmx.d: Likewise.
* gas/mips/mips.exp: Run new "mips64-mdmx" test.
[ include/opcode/ChangeLog ]
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
* mips.h (OP_SH_ALN, OP_MASK_ALN, OP_SH_VSEL, OP_MASK_VSEL)
(MDMX_FMTSEL_IMM_QH, MDMX_FMTSEL_IMM_OB, MDMX_FMTSEL_VEC_QH)
(MDMX_FMTSEL_VEC_OB, INSN_READ_MDMX_ACC, INSN_WRITE_MDMX_ACC)
(INSN_MDMX): New constants, for MDMX support.
(opcode character list): Add "O", "Q", "X", "Y", and "Z" for MDMX.
[ opcodes/ChangeLog ]
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
Ed Satterthwaite <ehs@broadcom.com>
* mips-dis.c (print_insn_arg): Add support for 'O', 'Q', 'X', 'Y',
and 'Z' formats, for MDMX.
(mips_isa_type): Add MDMX instructions to the ISA
bit mask for bfd_mach_mipsisa64.
* mips-opc.c: Add support for MDMX instructions.
(MX): New definition.
* mips-dis.c: Update copyright years to include 2002.
* gas/mips/mips-gp64-fp32.l: New file.
* gas/mips/mips-gp64-fp32.d: Use mips-gp64-fp32.l to check stderr
output.
* gas/mips/mips-gp64-fp64.l: New file.
* gas/mips/mips-gp64-fp64.d: Use mips-gp64-fp64.l to check stderr
output.
* lib/gas-defs.exp (run_dump_test): Support new attribute "stderr"
which is a file used to regexp_diff the assembler's pruned stderr
output.
(write_file): New helper function to write a string into a file.
* gas/mips/empic.l: New file which matches empic tests' warnings.
* gas/mips/empic.d: Use empic.l.
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* config/tc-mips.c (mips_set_options): New "ase_mips3d" member.
(mips_opts): Initialize "ase_mips3d" member.
(file_ase_mips3d): New variable.
(CPU_HAS_MIPS3D): New macro.
(md_begin): Initialize mips_opts.ase_mips3d and file_ase_mips3d
based on command line options and configuration defaults.
(macro_build, mips_ip): Accept MIPS-3D instructions if
mips_opts.ase_mips3d is set.
(OPTION_MIPS3D, OPTION_NO_MIPS3D, md_longopts, md_parse_option):
Add support for "-mips3d" and "-no-mips3d" options.
(OPTION_ELF_BASE): Move to accomodate new options.
(s_mipsset): Support ".set mips3d" and ".set nomips3d".
(mips_elf_final_processing): Add a comment indicating that a
MIPS-3D ASE ELF header flag should be set, when one exists.
* doc/as.texinfo: Document -mips3d and -no-mips3d options.
* doc/c-mips.texi: Likewise, and document ".set mips3d" and ".set
nomips3d" directives.
[ gas/testsuite/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* gas/mips/mips64-mips3d.s: New file.
* gas/mips/mips64-mips3d.d: Likewise.
* gas/mips/mips.exp: Run new "mips64-mips3d" test.
[ include/opcode/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* mips.h (INSN_MIPS3D): New definition used to mark MIPS-3D
instructions.
(OPCODE_IS_MEMBER): Adjust comments to indicate that ASE bit masks
may be passed along with the ISA bitmask.
[ opcodes/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_isa_type): Add MIPS3D instructions to the ISA
bit masks for bfd_mach_mips_sb1 and bfd_mach_mipsisa64. Add
comments for bfd_mach_mipsisa32 and bfd_mach_mipsisa64 that
indicate that they should dissassemble all applicable
MIPS-specified ASEs.
* mips-opc.c: Add support for MIPS-3D instructions.
(M3D): New definition.
* mips-opc.c: Update copyright years.
* gas/mips/empic2.d: Adjust for the fact that relocations on
symbols local to this file are resolved at assembly time into
section-relative relocations, even if the symbols are extern.
* gas/mips/empic2.s: Add file offset information, so the next
person to do the math mentioned above has an easier time.
* gas/mips/jal-empic-elf.d: New test.
* gas/mips/jal-empic-elf-2.d, gas/mips/jal-empic-elf-2.s: New test.
* gas/mips/jal-empic-elf-3.d, gas/mips/jal-empic-elf-3.s: New test.
* gas/mips/mips.exp: Run the new tests.
* NEWS: Document floating point number handling in gasp.
* gasp.c: Include <assert.h> and "xregex.h".
(is_flonum): New function.
(chew_flownum): Likewise.
(change_base): Consume flonums from the input, where possible.
* doc/gasp.texi (Constants): Document floating point numbers.
[testsuite/ChangeLog]
* gasp/flonums.asm: New test.
* gasp/flonums.err: New result.
* gasp/flonums.out: Likewise.
* gas/mips/mips.exp: Document (but do not XFAIL) currently-failing
MIPS ECOFF tests, providing what information is known about
the origins of the failures.
gas/mmix/err-bpo6.s, gas/mmix/basep-8.s, gas/mmix/basep-10.d,
gas/mmix/basep-10.s, gas/mmix/basep-11.s, gas/mmix/basep-11.d: New
tests for base-plus-offset relocations and global register
allocations for weak and common symbols.
* config/tc-arm.c (ARM_CEXT_XSCALE): Replaces ARM_EXT_XSCALE. All
uses changed.
(ARM_CEXT_MAVERICK): Similarly.
(ARM_ANY): Now means any core instruction.
(CPU_DEFAULT): Default to ARM_ANY.
(uses_apcs_26, atcps, support_interwork, uses_apcs_float)
(pic_code): Declare for all object types. Make type int.
(legacy_cpu, legacy_fpu, mcpu_cpu_opt, mcpu_fpu_opt, march_cpu_opt)
(march_fpu_opt, mfpu_opt): Declare.
(md_longopts): Tidy up conditional definitions.
(arm_opts, arm_cpus, arm_archs, arm_fpus, arm_extensions)
(arm_long_opts): New tables.
(arm_parse_cpu, arm_parse_arch, arm_parse_fpu): New functions.
(arm_parse_extension): New function.
(md_parse_option): Rewrite using new table-driven system.
(md_show_usage): Use new table-driven system.
(md_begin): Calculate cpu_variant from command line option data.
* doc/as.texinfo (ARM ISA options): Docuement new ARM-specific
command-line options.
* doc/c-arm.texi: Likewise.
Testsuite:
* gas/arm/vfp1.d: Use new command-line options.
* gas/arm/vfp1xD.d: Likewise.
* gas/arm/arm.exp (vfp-bad): Likewise.
* gas/arm/maverick.d: Likewise.
arm/fpa-monadic.s, arm/fpa-monadic.d, arm/fpa-dyadic.s,
arm/fpa-dyadic.d: New tests.
* gas/arm/le-fpconst.d (objdump): pass --section=.text
* gas/arm/arm.exp: Add new tests. Run le-fpconst test on elf targets.
op that can be translated into a mvn instruction.
* gas/arm/ldconst.s gas/arm/ldconst.d: New files. Test ldr with
immediate pseudo-operations.
* gas/arm/arm.exp: Run it.
R_SPARC_DISP32. Support R_SPARC_PLT32.
(sparc_reloc_map): Add BFD_RELOC_16_PCREL and BFD_RELOC_SPARC_PLT32.
(elf32_sparc_check_relocs): Handle R_SPARC_PLT32.
(elf32_sparc_relocate_section): Likewise.
* elf64-sparc.c (sparc64_elf_howto_table): Fix dst_mask for
R_SPARC_DISP32. Support R_SPARC_PLT32 and R_SPARC_PLT64.
(sparc_reloc_map): Add BFD_RELOC_16_PCREL, BFD_RELOC_64_PCREL
and BFD_RELOC_SPARC_PLT32.
(sparc64_elf_check_relocs): Handle R_SPARC_PLT32 and R_SPARC_PLT64.
(sparc64_elf_relocate_section): Likewise.
* reloc.c (bfd_reloc_code_type): Add BFD_RELOC_SPARC_PLT32.
* bfd-in2.h, libbfd.h: Rebuilt.
* config/tc-sparc.h (TC_PARSE_CONS_EXPRESSION): Define.
(sparc_cons): Provide prototype.
* config/tc-sparc.c (tc_gen_reloc): Handle BFD_RELOC_*_PCREL and
BFD_RELOC_SPARC_PLT{32,64}. Enumerate for which relocs
reloc->addend = fixp->fx_addnumber shouldn't be done instead of
enumarating for which pc relative ones it should be done.
(sparc_cons_special_reloc): New variable.
(sparc_cons): New function.
(cons_fix_new_sparc): Use sparc_cons_special_reloc.
* testsuite/gas/sparc/pcrel.s: New test.
* testsuite/gas/sparc/pcrel.d: Expected output.
* testsuite/gas/sparc/pcrel64.s: New test.
* testsuite/gas/sparc/pcrel64.d: Expected output.
* testsuite/gas/sparc/plt.s: New test.
* testsuite/gas/sparc/plt.d: Expected output.
* testsuite/gas/sparc/plt64.s: New test.
* testsuite/gas/sparc/plt64.d: Expected output.
* testsuite/gas/sparc/sparc.exp: Add pcrel, pcrel64, plt and plt64
tests.
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
Corinna Vinschen <vinschen@redhat.com>
* Makefile.am: Add support for xstormy16.
* archures.c: Add support for xstormy16.
* config.bfd: Add support for xstormy16.
* configure.in: Add support for xstormy16.
* reloc.c: Add support for xstormy16.
* targets.c: Add support for xstormy16.
* cpu-xstormy16.c: New file.
* elf32-xstormy16.c: New file.
* Makefile.in: Regenerated.
* bfd-in2.h: Regenerated.
* configure: Regenerated.
* libbfd.h: Regenerated.
Index: binutils/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* readelf.c (guess_is_rela): Add support for stormy16.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
Index: gas/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* configure.in: Add support for xstormy16.
* configure: Regenerated.
* Makefile.am: Add support for xstormy16.
* Makefile.in: Regenerated.
* config/tc-xstormy16.c: New file.
* config/tc-xstormy16.h: New file.
Index: gas/testsuite/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
matthew green <mrg@redhat.com>
* gas/xstormy16/allinsn.d: New file.
* gas/xstormy16/allinsn.exp: New file.
* gas/xstormy16/allinsn.s: New file.
* gas/xstormy16/allinsn.sh: New file.
* gas/xstormy16/gcc.d: New file.
* gas/xstormy16/gcc.s: New file.
* gas/xstormy16/gcc.sh: New file.
* gas/xstormy16/reloc-1.d: New file.
* gas/xstormy16/reloc-1.s: New file.
* gas/xstormy16/reloc-2.d: New file.
* gas/xstormy16/reloc-2.s: New file.
Index: ld/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* Makefile.am: Add support for xstormy16.
* configure.tgt: Add support for xstormy16.
* Makefile.in: Regenerate.
* emulparams/elf32xstormy16.sh: New file.
* scripttempl/xstormy16.sc: New file.
Index: opcodes/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* Makefile.am: Add support for xstormy16.
* Makefile.in: Regenerate.
* configure.in: Add support for xstormy16.
* configure: Regenerate.
* disassemble.c: Add support for xstormy16.
* xstormy16-asm.c: New generated file.
* xstormy16-desc.c: New generated file.
* xstormy16-desc.h: New generated file.
* xstormy16-dis.c: New generated file.
* xstormy16-ibld.c: New generated file.
* xstormy16-opc.c: New generated file.
* xstormy16-opc.h: New generated file.
Index: include/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* dis-asm.h (print_insn_xstormy16): Declare.
Index: include/elf/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* common.h (EM_XSTORMY16): Define.
* xstormy16.h: New file.
(md_longopts): Allow OPTION_MABI for ELF compilation only. RE-allow
OPTION_GP32, OPTION_GP64, OPTION_FP32 for non-ELF compilation.
Sort options a bit more logical.
(md_parse_option): Allow OPTION_32, OPTION_N32, OPTION_N64,
OPTION_MABI only for elf targets.
* gas/mips/mips.exp: Change naming of some conditionals to reflect
the object format they actually mean. Don't try mips-abi32 and
mips-abi32-pic tests for ecoff.
2001-11-04 Chris Demetriou <cgd@broadcom.com>
* configure.in (mips-*-netbsd*): Add support for target.
* configure: Regenerate.
[ gas/testsuite/ChangeLog ]
2001-11-04 Chris Demetriou <cgd@broadcom.com>
* gas/mips/mips.exp (svr4pic): Set if target is *-*-netbsd*.
(aout): Don't set if *-*-netbsd*.
[ ld/ChangeLog ]
2001-11-04 Chris Demetriou <cgd@broadcom.com>
* configure.tgt (mips*el-*-netbsd*, mips*-*-netbsd*):
Add support for targets.
2001-10-31 Chris Demetriou <cgd@demetriou.com>
* elf32-mips.c (_bfd_mips_elf_hi16_reloc): Handle PC-relative
relocations properly.
[ gas/ChangeLog ]
2001-10-31 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (HAVE_32BIT_ADDRESSES): If compiling embedded
PIC code, assume pointers the same size as GPRs.
(macro): In M_LA_AB handling for embedded PIC code, support
"la $treg,foo-bar($breg)". In load/store handling
(label ld_st) support "<op> $treg,<sym>-<local_sym>($breg)"
which is used by the compiler for switch statements.
In load/store double multi-instruction macro handling
(label ldd_std) add a comment that no special handling
is currently done for embedded PIC.
(mips_ip): In 'o' (16-bit offset) case, only accept 16
bit offsets.
[ gas/testsuite/ChangeLog ]
2001-10-31 Chris Demetriou <cgd@broadcom.com>
* gas/mips/empic.s: Undo damage inflicted on 2000-12-02.
* gas/mips/empic.d: Likewise.
* gas/mips/elempic.d: Likewise (it was copied into other files).
* gas/mips/telempic.d: Likewise.
* gas/mips/tempic.d: Likewise.
* gas/mips/empic2.s: New test to check new 'la' and 'lw' (and
related ops) syntax, test loads with large offsets.
* gas/mips/emcic2.d: Likewise.
* gas/mips/mips.exp: Run the new test on ELF platforms.
2001-10-21 Chris Demetriou <cgd@broadcom.com>
* mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
"bltzall" as writing GPR 31 (since they do).
* mips-dis.c (print_insn_arg): Calculate info->target
where appropriate.
(print_insn_mips): Fill in instruction info.
(print_mips16_insn_arg): Remove unneded variable 'val'.
Removed duplicated instruction target calculations,
calculate once and print that result. Use same idiom for
masking the jump segment bits as is used in print_insn_arg.
[gas/testsuite/ChangeLog]
2001-10-21 Chris Demetriou <cgd@broadcom.com>
* gas/mips/beq.s: Add zero words at end of instructions so
that objdump will print "..." when disassembling.
* gas/mips/beq.d: Update for disassembler changes which force
branch delay-slot nops to be printed.
* gas/mips/bge.d: Ditto.
* gas/mips/bgeu.d: Ditto.
* gas/mips/blt.d: Ditto.
* gas/mips/bltu.d: Ditto.
* gas/mips/jal-svr4pic.d: Ditto.
* gas/mips/jal-xgot.d: Ditto.
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* gas/mips/mips.exp (sb1-ext-ps): New test to test
SB-1 core's paired-single extensions to the MIPS64 ISA.
* gas/mips/sb1-ext-ps.d: New file.
* gas/mips/sb1-ext-ps.s: New file.
[include/opcode/ChangeLog]
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* mips.h (INSN_SB1): New cpu-specific instruction bit.
(OPCODE_IS_MEMBER): Allow instructions matching INSN_SB1
if cpu is CPU_SB1.
[opcodes/ChangeLog]
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_isa_type): Make the ISA used to disassemble
SB-1 binaries include instructions specific to the SB-1.
* mips-opc.c (SB1): New definition.
(mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
"recip.ps", "rsqrt.ps", and "sqrt.ps".
* gas/ppc/booke.s (rfci, wrtee, wrteei, mfdcrx, mfdcr, mtdcrx,
mtdcr, msync, dcba, mbar): New BookE tests.
* gas/ppc/booke.d: Update for new BookE tests.
[opcodes/ChangeLog]
* ppc-opc.c (MO): New macro for MO field of mbar instruction.
(powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
* config/tc-ppc.c (md_parse_option): New -m7410, -m7450 and -m7455
flags, equivalent to -m7400. New -maltivec to enable AltiVec
instructions. New -mbook64 and -mbooke/-mbooke32 flags to enable
64-bit and 32-bit BookE support, respectively. Change -m403 and
-m405 to set PPC403 option.
(md_show_usage): Adjust for new options.
* doc/all.texi: Set PPC.
* doc/as.texinfo: Add PPC support and pull in c-ppc.texi.
* doc/c-ppc.texi: New file.
* doc/Makefile.am (CPU_DOCS): Add c-ppc.texi.
* doc/Makefile.in: Regenerate.
[gas/testsuite/ChangeLog]
* gas/ppc/booke.s: New test for Motorola BookE.
* gas/ppc/booke.d: New file.
* gas/ppc/ppc.exp: Test booke.s.
[include/opcode/ChangeLog]
* ppc.h (PPC_OPCODE_BOOKE, PPC_OPCODE_403): New opcode flags for
BookE and PowerPC403 instructions.
[opcodes/ChangeLog]
* ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
instruction field instruction/extraction functions for new BookE
DE form instructions.
(CT): New macro for CT field in an X form instruction.
(DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
instructions.
(PPC64): Don't include PPC_OPCODE_PPC.
(403): New opcode macro for PPC403 processors.
(BOOKE): New opcode macro for BookE processors.
(bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
(bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
(dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
(stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
(mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
(subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
(subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
(addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
(lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
(stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
(tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
(lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
(stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
(lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
* ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
for a disassembler option of `booke', `booke32' or `booke64' to enable
BookE support in the disassembler.
