This tidies some code used by readelf, hopefully fixing some
intermittent oss-fuzz bug reports that likely could only be reproduced
by feeding readelf two or more object files on the command line. The
second and subsequent file may see non-zero state in .bss variables,
and non-initial values in .data variables. This patch fixes some of
those, and moves some .data variables to .rodata.
* dwarf.c (frame_display_row): Do without static variable "sloc".
(cu_tu_indexes_read): Move to file scope.
(free_debug_memory): Reset it here, along with level_type_signed.
Free and clear a number of other static variables.
* readelf.c (arm_attr_public_tag <table>): Constify, updating..
(arm_attr_tag_*): ..all these uses.
(process_mips_specific): Free "rels" on error path.
PR 26829
* dwarf.c (struct dwo_info): Add cu_offset field.
(add_dwo_info): Add cu_offset parameter. Record in new dwo_info
struct.
(add_dwo_name): Add cu_offset field.
(add_dwo_dir): Add cu_offset field.
(add_dwo_id): Add cu_offset field.
(read_and_display_attr_value): Pass cu_offset to dwo recording
functions.
(load_separate_debug_files): Accumulate name, dir and id values
and display once for each CU.
* testsuite/binutils-all/dwo.sL Use a separate CU for the second
dwo link.
* testsuite/binutils-all/readelf.k2: Update expected output.
A .debug_abbrev section can have multiple CUs. When caching abbrev list,
we need to check abbrev base to support multiple CUs.
PR binutils/26808
* dwarf.c (abbrev_list): Add abbrev_base.
(new_abbrev_list): Add an abbrev_base argument and record it.
(find_abbrev_list_by_abbrev_offset): Add an abbrev_base argument
and match it.
(process_debug_info): Pass abbrev_base to new_abbrev_list and
find_abbrev_list_by_abbrev_offset.
(display_debug_abbrev): Pass 0 abbrev_base to new_abbrev_list
and find_abbrev_list_by_abbrev_offset.
* testsuite/binutils-all/x86-64/pr26808.dump: New file.
* testsuite/binutils-all/x86-64/pr26808.dwp.bz2: Likewise.
* testsuite/binutils-all/x86-64/x86-64.exp: Run PR binutils/26808
test.
* dwarf.c (struct abbrev_list): New structure. Used to collect
lists of abbreviation sets.
(struct abbrev_map): New structure. Used to map CU offsets to
abbreviation offsets.
(record_abbrev_list): New function. A new entry to an
abbreviation list.
(free_all_abbrevs): Update to free abbreviation lists.
(new_abbrev_list): New function. Start a new abbreviation
list.
(find_abbrev_list_by_abbrev_offset): New function.
(find_abbrev_map_by_offset): New function.
(add_abbrev): Add abbrev_list parameter.
(add_abbrev_attr): Likewise.
(process_abbrev_section): Rename to process_abbrev_set and add
list parameter.
(get_type_abbrev_from_form): New function. Attempts to decode the
forms used by DW_AT_type attributes.
(get_type_signedness): Display type names if operating in wide
mode. Use get_type_abbrev_from_form.
(read_and_display_attr_value): Use get_type_abbrev_from_form.
(process_debug_info): Pre-parse the CU headers to collate all the
abbrevs before starting the main scan.
(process_debug_abbrev): Do not free any loaded abbrevs.
(free_debug_memory): Free the abbrev maps.
* dwarf.c (skip_attr_bytes): Accept DWARF versions higher than 4
when processing the DW_FORM_ref_addr form.
Skip bytes in DW_FORM_block and DW_FORM_exprloc forms.
Handle DW_FORM_indirect.
(get_type_signedness): Allow a limited amount of recursion.
Do not attempt to decode types that use the DW_FORM_ref_addr form.
(read_and_display_attr_value): Do not attempt to decode types
that use the DW_FORM_ref_addr form.
display_loclists_list only handled DW_LLE_offset_pair as bounded
location description. Also handle DW_LLE_start_end and DW_LLE_start_lenght.
These don't use the base_address.
binutils/ChangeLog:
* dwarf.c (display_loclists_list): Handle DW_LLE_start_end and
DW_LLE_start_length. Only add base_address for DW_LLE_offset_pair.
dwz in DWARF5 mode might produce DW_UT_partial unit types, which are
the same as DW_UT_compile unit types (but start with a DW_TAG_partial_unit)
and it might produce DW_FORM_ref_addr to create a reference between
units. Accept both constructs.
binutils/ChangeLog:
* dwarf.c (read_and_display_attr_value): Handle DW_FORM_ref_addr
for dwarf_version 5 just as version 3 and 4 (only 2 is different).
(process_debug_info): Allow DW_UT_partial.
PR 26595
* dwarf.c (load_separate_debug_info): Return NULL rather than
FALSE in error situations.
(load_separate_debug_file): Move code to load debug links to ...
(check_for_and_load_links): ... here. New function. Load
separate debug information pointed to by debuglink and
debugaltlink sections. Recursively scan newly loaded debug
information for more links and load them too.
The associated check function doesn't do anything with its "data"
param, so nothing to adjust there.
PR 26578
* dwarf.c (parse_gnu_debugaltlink): Don't alloc build_id_data.
(load_separate_debug_files): Use a stack var for build_id_data.
num_debug_info_entries is used not just as a count but also as a flag
(DEBUG_INFO_UNAVAILABLE) after some errors. That means
num_debug_info_entries can't be used when cleaning up malloc'd info.
PR 26388
* dwarf.c (free_debug_memory): Free alloc_num_debug_info_entries
of debug_information. Correct test of max_loc_offsets and
max_range_lists.
* rddbg.c (read_debugging_info): Free dhandle on error.
In older gcc, shadowing a function name with a local variable name is
flagged as an error, certainly a bug but which is usually worked
around in binutils:
gcc -DHAVE_CONFIG_H -I. -I$SRC/binutils -I. -I$SRC/binutils -I../bfd -I$SRC/binutils/../bfd -I$SRC/binutils/../include -DLOCALEDIR="\"/usr/local/share/locale\"" -Dbin_dummy_emulation=bin_vanilla_emulation -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Werror -I$SRC/binutils/../zlib -g -O2 -MT dwarf.o -MD -MP -MF $depbase.Tpo -c -o dwarf.o $SRC/binutils/dwarf.c &&\
mv -f $depbase.Tpo $depbase.Po
cc1: warnings being treated as errors
$SRC/binutils/dwarf.c: In function 'display_debug_str_offsets':
$SRC/binutils/dwarf.c:6913: error: declaration of 'index' shadows a global declaration
/usr/include/string.h:309: error: shadowed declaration is here
make[4]: *** [dwarf.o] Error 1
See also GCC PR c/53066. This is just another one that crept in since
I and others last had to use an old version. The name "idx" was used
in the preceding function, display_debug_addr. Also, it was declared
c99 style (after a statement in the block). Committed as obvious.
binutils:
* dwarf.c (display_debug_str_offsets): Rename local variable
index to idx. Move to top of function.
PR 26160
* dwarf.c (fetch_indexed_string): Detect and handle old style
.debug_str_offset tables.
(display_debug_str_offsets): Likewise. Also add support for
.debug_str_offsets.dwo sections.
PR 26112
* dwarf.c (display_debug_str_offsets): Add code to display the
contents of the .debug_str_offsets section.
(display_debug_macro): Add support for DW_MACRO_define_strx and
DW_MACRO_undef_strx.
1. Remove the -mriscv-isa-version and --with-riscv-isa-version options.
We can still use -march to choose the version for each extensions, so there is
no need to add these.
2. Change the arguments of options from [1p9|1p9p1|...] to [1.9|1.9.1|...].
Unlike the architecture string has specified by spec, ther is no need to do
the same thing for options.
3. Spilt the patches to reduce the burdens of review.
[PATCH 3/7] RISC-V: Support new GAS options and configure options to set ISA versions
to
[PATCH v2 3/9] RISC-V: Support GAS option -misa-spec to set ISA versions
[PATCH v2 4/9] RISC-V: Support configure options to set ISA versions by default.
[PATCH 4/7] RISC-V: Support version checking for CSR according to privilege version.
to
[PATCH v2 5/9] RISC-V: Support version checking for CSR according to privilege spec version.
[PATCH v2 6/9] RISC-V: Support configure option to choose the privilege spec version.
4. Use enum class rather than string to compare the choosen ISA spec in opcodes/riscv-opc.c.
The behavior is same as comparing the choosen privilege spec.
include * opcode/riscv.h: Include "bfd.h" to support bfd_boolean.
(enum riscv_isa_spec_class): New enum class. All supported ISA spec
belong to one of the class
(struct riscv_ext_version): New structure holds version information
for the specific ISA.
* opcode/riscv-opc.h (DECLARE_CSR): There are two version information,
define_version and abort_version. The define_version means which
privilege spec is started to define the CSR, and the abort_version
means which privilege spec is started to abort the CSR. If the CSR is
valid for the newest spec, then the abort_version should be
PRIV_SPEC_CLASS_DRAFT.
(DECLARE_CSR_ALIAS): Same as DECLARE_CSR, but only for the obselete CSR.
* opcode/riscv.h (enum riscv_priv_spec_class): New enum class. Define
the current supported privilege spec versions.
(struct riscv_csr_extra): Add new fields to store more information
about the CSR. We use these information to find the suitable CSR
address when user choosing a specific privilege spec.
binutils * dwarf.c: Updated since DECLARE_CSR is changed.
opcodes * riscv-opc.c (riscv_ext_version_table): The table used to store
all information about the supported spec and the corresponding ISA
versions. Currently, only Zicsr is supported to verify the
correctness of Z sub extension settings. Others will be supported
in the future patches.
(struct isa_spec_t, isa_specs): List for all supported ISA spec
classes and the corresponding strings.
(riscv_get_isa_spec_class): New function. Get the corresponding ISA
spec class by giving a ISA spec string.
* riscv-opc.c (struct priv_spec_t): New structure.
(struct priv_spec_t priv_specs): List for all supported privilege spec
classes and the corresponding strings.
(riscv_get_priv_spec_class): New function. Get the corresponding
privilege spec class by giving a spec string.
(riscv_get_priv_spec_name): New function. Get the corresponding
privilege spec string by giving a CSR version class.
* riscv-dis.c: Updated since DECLARE_CSR is changed.
* riscv-dis.c: Add new disassembler option -Mpriv-spec to dump the CSR
according to the chosen version. Build a hash table riscv_csr_hash to
store the valid CSR for the chosen pirv verison. Dump the direct
CSR address rather than it's name if it is invalid.
(parse_riscv_dis_option_without_args): New function. Parse the options
without arguments.
(parse_riscv_dis_option): Call parse_riscv_dis_option_without_args to
parse the options without arguments first, and then handle the options
with arguments. Add the new option -Mpriv-spec, which has argument.
* riscv-dis.c (print_riscv_disassembler_options): Add description
about the new OBJDUMP option.
ld * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated
priv attributes according to the -mpriv-spec option.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-b.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise.
bfd * elfxx-riscv.h (riscv_parse_subset_t): Add new callback function
get_default_version. It is used to find the default version for
the specific extension.
* elfxx-riscv.c (riscv_parsing_subset_version): Remove the parameters
default_major_version and default_minor_version. Add new bfd_boolean
parameter *use_default_version. Set it to TRUE if we need to call
the callback rps->get_default_version to find the default version.
(riscv_parse_std_ext): Call rps->get_default_version if we fail to find
the default version in riscv_parsing_subset_version, and then call
riscv_add_subset to add the subset into subset list.
(riscv_parse_prefixed_ext): Likewise.
(riscv_std_z_ext_strtab): Support Zicsr extensions.
* elfnn-riscv.c (riscv_merge_std_ext): Use strcasecmp to compare the
strings rather than characters.
riscv_merge_arch_attr_info): The callback function get_default_version
is only needed for assembler, so set it to NULL int the linker.
* elfxx-riscv.c (riscv_estimate_digit): Remove the static.
* elfxx-riscv.h: Updated.
gas * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Updated.
* config/tc-riscv.c (default_arch_with_ext, default_isa_spec):
Static variables which are used to set the ISA extensions. You can
use -march (or ELF build attributes) and -misa-spec to set them,
respectively.
(ext_version_hash): The hash table used to handle the extensions
with versions.
(init_ext_version_hash): Initialize the ext_version_hash according
to riscv_ext_version_table.
(riscv_get_default_ext_version): The callback function of
riscv_parse_subset_t. According to the choosed ISA spec,
get the default version for the specific extension.
(riscv_set_arch): Set the callback function.
(enum options, struct option md_longopts): Add new option -misa-spec.
(md_parse_option): Do not call riscv_set_arch for -march. We will
call it later in riscv_after_parse_args. Call riscv_get_isa_spec_class
to set default_isa_spec class.
(riscv_after_parse_args): Call init_ext_version_hash to initialize the
ext_version_hash, and then call riscv_set_arch to set the architecture
with versions according to default_arch_with_ext.
* testsuite/gas/riscv/attribute-02.d: Set 0p0 as default version for
x extensions.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: New testcase. For i-ext, we
already set it's version to 2p1 by march, so no need to use the default
2p2 version. For m-ext, we do not set the version by -march and ELF arch
attribute, so set the default 2p0 to it. For zicsr, it is not defined in
ISA spec 2p2, so set 0p0 to it.
* testsuite/gas/riscv/attribute-10.d: New testcase. The version of
zicsr is 2p0 according to ISA spec 20191213.
* config/tc-riscv.c (DEFAULT_RISCV_ARCH_WITH_EXT)
(DEFAULT_RISCV_ISA_SPEC): Default configure option settings.
You can set them by configure options --with-arch and
--with-isa-spec, respectively.
(riscv_set_default_isa_spec): New function used to set the
default ISA spec.
(md_parse_option): Call riscv_set_default_isa_spec rather than
call riscv_get_isa_spec_class directly.
(riscv_after_parse_args): If the -isa-spec is not set, then we
set the default ISA spec according to DEFAULT_RISCV_ISA_SPEC by
calling riscv_set_default_isa_spec.
* testsuite/gas/riscv/attribute-01.d: Add -misa-spec=2.2, since
the --with-isa-spec may be set to different ISA spec.
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* configure.ac: Add configure options, --with-arch and
--with-isa-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (default_priv_spec): Static variable which is
used to check if the CSR is valid for the chosen privilege spec. You
can use -mpriv-spec to set it.
(enum reg_class): We now get the CSR address from csr_extra_hash rather
than reg_names_hash. Therefore, move RCLASS_CSR behind RCLASS_MAX.
(riscv_init_csr_hashes): Only need to initialize one hash table
csr_extra_hash.
(riscv_csr_class_check): Change the return type to void. Don't check
the ISA dependency if -mcsr-check isn't set.
(riscv_csr_version_check): New function. Check and find the CSR address
from csr_extra_hash, according to default_priv_spec. Report warning
for the invalid CSR if -mcsr-check is set.
(reg_csr_lookup_internal): Updated.
(reg_lookup_internal): Likewise.
(md_begin): Updated since DECLARE_CSR and DECLARE_CSR_ALIAS are changed.
(enum options, struct option md_longopts): Add new GAS option -mpriv-spec.
(md_parse_option): Call riscv_set_default_priv_version to set
default_priv_spec.
(riscv_after_parse_args): If -mpriv-spec isn't set, then set the default
privilege spec to the newest one.
(enum riscv_csr_class, struct riscv_csr_extra): Move them to
include/opcode/riscv.h.
* testsuite/gas/riscv/priv-reg-fail-fext.d: This test case just want
to check the ISA dependency for CSR, so fix the spec version by adding
-mpriv-spec=1.11.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise. There are some
version warnings for the test case.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.d: New test case.
Check whether the CSR is valid when privilege version 1.9 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: New test case.
Check whether the CSR is valid when privilege version 1.9.1 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.d: New test case.
Check whether the CSR is valid when privilege version 1.10 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.d: New test case.
Check whether the CSR is valid when privilege version 1.11 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Default configure option
setting. You can set it by configure option --with-priv-spec.
(riscv_set_default_priv_spec): New function used to set the default
privilege spec.
(md_parse_option): Call riscv_set_default_priv_spec rather than
call riscv_get_priv_spec_class directly.
(riscv_after_parse_args): If -mpriv-spec isn't set, then we set the
default privilege spec according to DEFAULT_RISCV_PRIV_SPEC by
calling riscv_set_default_priv_spec.
* testsuite/gas/riscv/csr-dw-regnums.d: Add -mpriv-spec=1.11, since
the --with-priv-spec may be set to different privilege spec.
* testsuite/gas/riscv/priv-reg.d: Likewise.
* configure.ac: Add configure option --with-priv-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (explicit_attr): Rename explicit_arch_attr to
explicit_attr. Set it to TRUE if any ELF attribute is found.
(riscv_set_default_priv_spec): Try to set the default_priv_spec if
the priv attributes are set.
(md_assemble): Set the default_priv_spec according to the priv
attributes when we start to assemble instruction.
(riscv_write_out_attrs): Rename riscv_write_out_arch_attr to
riscv_write_out_attrs. Update the arch and priv attributes. If we
don't set the corresponding ELF attributes, then try to output the
default ones.
(riscv_set_public_attributes): If any ELF attribute or -march-attr
options is set (explicit_attr is TRUE), then call riscv_write_out_attrs
to update the arch and priv attributes.
(s_riscv_attribute): Make sure all arch and priv attributes are set
before any instruction.
* testsuite/gas/riscv/attribute-01.d: Update the priv attributes if any
ELF attribute or -march-attr is set. If the priv attributes are not
set, then try to update them by the default setting (-mpriv-spec or
--with-priv-spec).
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* testsuite/gas/riscv/attribute-08.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: Likewise.
* testsuite/gas/riscv/attribute-10.d: Likewise.
* testsuite/gas/riscv/attribute-unknown.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise. Also, the priv spec
set by priv attributes must be supported.
* testsuite/gas/riscv/attribute-05.s: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Likewise. Updated
priv attributes according to the -mpriv-spec option.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg.d: Removed.
* testsuite/gas/riscv/priv-reg-version-1p9.d: New test case. Dump the
CSR according to the priv spec 1.9.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: New test case. Dump the
CSR according to the priv spec 1.9.1.
* testsuite/gas/riscv/priv-reg-version-1p10.d: New test case. Dump the
CSR according to the priv spec 1.10.
* testsuite/gas/riscv/priv-reg-version-1p11.d: New test case. Dump the
CSR according to the priv spec 1.11.
* config/tc-riscv.c (md_show_usage): Add descriptions about
the new GAS options.
* doc/c-riscv.texi: Likewise.
binutils* dwarf.c (do_checks): New global variable.
(display_formatted_table): Warn about an unexpected number of
columns in the table, if checks are enabled. Do not complain
about the lack of data following the number of entries in the
table if the table is empty.
(display_debug_lines_decoded): Only warn about an unexpected
number of columns in a table if checks are enabled.
* dwarf.h (do_checks): Add a prototype.
* elfcomm.c (error): Remove weak attribute.
(warn): Likewise.
* readelf.c (do_checks): Delete.
(warn): Delete.
(process_section_headers): Only warn about empty sections if
checks are enabled.
gas * dwarf2dbg.c (out_dir_and_file_list): Add comments describing the
construction of a DWARF-5 directory name table.
* testsuite/gas/elf/pr25917.d: Update expected output.
PR 25917
* dwarf.c (display_debug_lines_decoded): Warn if encountering a
supicious number of entries for DWARF-5 format directory and file
name tables. Do not display file name table header if the table
is empty. Do not allocate space for empty tables.
* readelf.c (warn): New function - like elfcomm.c version but only
produces output if warnings are enabled.
(struct options): Add --lint and --enable-checks.
(usage): Add entry for --lint.
(parse_args): Handle -L. If checks are enabled but no dumps have
been selected then enable all dumps.
(process_section_headers): Replace long if-then-else sequence with
a switch. Add warning messages for empty SHT_REL, SHT_RELA and
SHT_PROGBITS sections.
(process_file): Do not complain if the file is an archive and lint
mode has been enabled.
* elfcomm.c (error): Make the function weak.
(warn): Likewise.
* NEWS: Mention the new feature.
* doc/binutils.texi: Document the new feature.
* dwarf.h (report_leb_status): Add file name and line number
parameters. Include them in the diagnostic output.
(READ_ULEB): Pass file and line number to report_leb_status.
(READ_SLEB): Likewise.
* dwarf.c (read_and_print_leb128): Pass file and line number to
report_leb_status.
* testsuite/binutils-all/readelf.exp: Add test of new feature.
* testsuite/binutils-all/zero-sec.s: New test source file.
* testsuite/binutils-all/zero-sec.r: Expected output from new
test.
PR 25611
PR 25614
* dwarf.h (DWARF2_Internal_LineInfo): Add li_address_size and
li_segment_size fields.
* dwarf.c (read_debug_line_header): Record the address size and
segment selector size values (if present) in the lineinfo
structure.
(display_formatted_table): Warn if the format count is empty but
the table itself is not empty.
Display the format count and entry count at the start of the table
dump.
(display_debug_lines_raw): Display the address size and segement
selector size fields, if present.
* testsuite/binutils-all/dw5.W: Update expected output.
gas * dwarf2dbg.c (DWARF2_FILE_TIME_NAME): Default to -1.
(DWARF2_FILE_SIZE_NAME): Default to -1.
(DWARF2_LINE_VERSION): Default to the current dwarf level or 3,
whichever is higher.
(DWARF2_LINE_MAX_OPS_PER_INSN): Provide a default value of 1.
(NUM_MD5_BYTES): Define.
(struct file entry): Add md5 field.
(get_filenum): Delete and replace with...
(get_basename): New function.
(get_directory_table_entry): New function.
(allocate_filenum): New function.
(allocate_filename_to_slot): New function.
(dwarf2_where): Use new functions.
(dwarf2_directive_filename): Add support for extended .file
pseudo-op.
(dwarf2_directive_loc): Allow the use of file number zero with
DWARF 5 or higher.
(out_file_list): Rename to...
(out_dir_and_file_list): Add DWARF 5 support.
(out_debug_line): Emit extra values into the section header for
DWARF 5.
(out_debug_str): Allow for file 0 to be used with DWARF 5.
* doc/as.texi (.file): Update the description of this pseudo-op.
* testsuite/gas/elf-dwarf-5-file0.s: Add more lines.
* testsuite/gas/elf-dwarf-5-file0.d: Update expected dump output.
* testsuite/gas/lns/lns-diag-1.l: Update expected error message.
* NEWS: Mention the new feature.
According to the riscv privilege spec, some CSR are only valid when rv32 or
the specific extension is set. We extend the DECLARE_CSR and DECLARE_CSR_ALIAS
to record more informaton we need, and then check whether the CSR is valid
according to these information. We report warning message when the CSR is
invalid, so we have a choice between error and warning by --fatal-warnings
option. Also, a --no-warn/-W option is used to turn the warnings off, if
people don't want the warnings.
gas/
* config/tc-riscv.c (enum riscv_csr_class): New enum. Used to decide
whether or not this CSR is legal in the current ISA string.
(struct riscv_csr_extra): New structure to hold all extra information
of CSR.
(riscv_init_csr_hash): New function. According to the DECLARE_CSR and
DECLARE_CSR_ALIAS, insert CSR extra information into csr_extra_hash.
Call hash_reg_name to insert CSR address into reg_names_hash.
(md_begin): Call riscv_init_csr_hashes for each DECLARE_CSR.
(reg_csr_lookup_internal, riscv_csr_class_check): New functions.
Decide whether the CSR is valid according to the csr_extra_hash.
(init_opcode_hash): Update 'if (hash_error != NULL)' as hash_error is
not a boolean. This is same as riscv_init_csr_hash, so keep the
consistent usage.
* testsuite/gas/riscv/csr-dw-regnums.d: Add -march=rv32if option.
* testsuite/gas/riscv/priv-reg.d: Add f-ext by -march option.
* testsuite/gas/riscv/priv-reg-fail-fext.d: New testcase. The source
file is `priv-reg.s`, and the ISA is rv32i without f-ext, so the
f-ext CSR are not allowed.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.d: New testcase. The
source file is `priv-reg.s`, and the ISA is rv64if, so the
rv32-only CSR are not allowed.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
include/
* opcode/riscv-opc.h: Extend DECLARE_CSR and DECLARE_CSR_ALIAS to
record riscv_csr_class.
opcodes/
* riscv-dis.c (print_insn_args): Updated since the DECLARE_CSR is changed.
gdb/
* riscv-tdep.c: Updated since the DECLARE_CSR is changed.
* riscv-tdep.h: Likewise.
* features/riscv/rebuild-csr-xml.sh: Generate the 64bit-csr.xml without
rv32-only CSR.
* features/riscv/64bit-csr.xml: Regernated.
binutils/
* dwarf.c: Updated since the DECLARE_CSR is changed.
debuginfod is a lightweight web service that indexes ELF/DWARF
debugging resources by build-id and serves them over HTTP. This patch
enables objdump and readelf to query debuginfod servers when they are
otherwise not able to find separate debug files. Binutils can be built
with debuginfod using the --with-debuginfod configure option. This
requires that libdebuginfod be installed and found at configure time.
debuginfod is packaged with elfutils, starting with version 0.178. For
more information see https://sourceware.org/elfutils/.
toplevel* config/debuginfod.m4: New file. Add macro AC_DEBUGINFOD. Adds
new configure option --with-debuginfod.
* configure: Regenerate.
* configure.ac: Call AC_DEBUGINFOD.
binutils* Makefile.am (readelf_LDADD, objdump_LDADD): Add libdebuginfod.
* Makefile.in: Regenerate.
* NEWS: Update.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: Call AC_DEBUGINFOD.
* doc/Makefile.in: Regenerate.
* doc/binutils.texi: Add section on using binutils
with debuginfod.
* dwarf.c (debuginfod_fetch_separate_debug_info): New function.
Query debuginfod servers for the target debug file.
(load_separate_debug_info): Call
debuginfod_fetch_separate_debug_info if configured with
debuginfod.
(load_separate_debug_files): Add file argument to
load_separate_debug_info calls.
* dwarf.h (get_build_id): Add declaration.
* objdump.c (get_build_id): New function. Get build-id of file.
* readelf.c (get_build_id): Likewise.
* testsuite/binutils-all/debuginfod.exp: New tests.
* testsuite/binutils-all/linkdebug.s: Add .note.gnu.build-id
section.
This patch catches and reports errors when reading leb128 values,
addressing a FIXME in read_leb128.
* dwarf.h (read_leb128): Update prototype.
(report_leb_status): New inline function.
(SKIP_ULEB, SKIP_SLEB, READ_ULEB, READ_SLEB): Define.
* dwarf.c: Use above macros throughout file. Formatting.
(read_leb128): Reorder params. Add status return param.
Don't stop reading until finding terminator or end of data.
Detect loss of significant bits. Sign extend only on
terminating byte.
(read_sleb128, read_uleb128): Delete functions.
(SKIP_ULEB, SKIP_SLEB, READ_ULEB, READ_SLEB): Delete macros.
(read_and_print_leb128): Rewrite.
(process_extended_line_op): Return a size_t. Use size_t vars.
Adjust to suit new macros. Add proper name size to "data" when
processing DW_LNE_define_file.
(process_abbrev_section): Adjust to suit new macros.
(decode_location_expression, skip_attr_bytes): Likewise.
(get_type_signedness): Likewise.
(read_and_display_attr_value): Likewise. Consolidate block code.
(process_debug_info): Adjust to suit new macros.
(display_formatted_table, display_debug_lines_raw): Likewise.
(display_debug_lines_decoded): Likewise. Properly check for end
of DW_LNS_extended_op.
(display_debug_macinfo): Adjust to suit new macros.
(get_line_filename_and_dirname, display_debug_macro): Likewise.
(display_view_pair_list): Likewise. Don't back off when hitting
end of data.
(display_loc_list): Adjust to suit new macros.
(display_loclists_list, display_loc_list_dwo): Likewise.
(display_debug_rnglists_list, read_cie): Likewise.
(display_debug_frames): Likewise.
* readelf.c: Use new ULEB macros throughout file.
(read_uleb128): Delete.
(decode_arm_unwind_bytecode): Use read_leb128.
(decode_tic6x_unwind_bytecode): Likewise.
(display_tag_value): Adjust to suit new macros.
(display_arc_attribute, display_arm_attribute): Likewise.
(display_gnu_attribute, display_power_gnu_attribute): Likewise.
(display_s390_gnu_attribute, display_sparc_gnu_attribute): Likewise.
(display_mips_gnu_attribute, display_tic6x_attribute): Likewise.
(display_msp430x_attribute, display_msp430_gnu_attribute): Likewise.
(display_riscv_attribute, process_attributes): Likewise.
This commit gives DWARF register numbers to the RISC-V CSRs inline
with the RISC-V ELF specification here:
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md
The CSRs are defined being numbered from 4096 to 8191.
This adds support to the assembler, required in order to reference
CSRs in, for example .cfi directives.
I have then extended dwarf.c in order to support printing CSR names in
the dumped DWARF output. As the CSR name space is quite large and
only sparsely populated, I have provided a new function to perform
RISC-V DWARF register name lookup which uses a switch statement rather
than the table base approach that other architectures use.
Any CSR that does not have a known name will return a name based on
'csr%d' with the %d being replaced by the offset of the CSR from 4096.
gas/ChangeLog:
* config/tc-riscv.c (tc_riscv_regname_to_dw2regnum): Lookup CSR
names too.
* testsuite/gas/riscv/csr-dw-regnums.d: New file.
* testsuite/gas/riscv/csr-dw-regnums.s: New file.
binutils/ChangeLog:
* dwarf.c (regname_internal_riscv): New function.
(init_dwarf_regnames_riscv): Use new function.
Change-Id: I3f70bc24fa8b3c75744e6775eeeb87db70c7ecfb
Add a layer of indirection for DWARF register name lookup by
introducing a function pointer. Right now all targets use the same
table based implementation that they always have, however, this will
change in a later commit.
binutils/ChangeLog:
* dwarf.c (typedef dwarf_regname_lookup_ftype): New typedef.
(dwarf_regnames_lookup_func): New static global.
(init_dwarf_regnames_i386): Set dwarf_regnames_lookup_func.
(init_dwarf_regnames_iamcu): Likewise.
(init_dwarf_regnames_x86_64): Likewise.
(init_dwarf_regnames_aarch64): Likewise.
(init_dwarf_regnames_s390): Likewise.
(init_dwarf_regnames_riscv): Likewise.
(init_dwarf_regnames_by_elf_machine_code): Reset
dwarf_regnames_lookup_func to NULL.
(init_dwarf_regnames_by_bfd_arch_and_mach): Likewise.
(regname_internal_by_table_only): New function.
(regname): Make use of dwarf_regnames_lookup_func.
Change-Id: Ibbff61c0abea32927f35c9e478793039ab8bb57d
The architecture specific register name initialisation routines no
longer need to be externally visible, so make them static.
binutils/ChangeLog:
* dwarf.c (init_dwarf_regnames_i386): Make static.
(init_dwarf_regnames_iamcu): Make static.
(init_dwarf_regnames_x86_64): Make static.
(init_dwarf_regnames_aarch64): Make static.
(init_dwarf_regnames_s390): Make static.
(init_dwarf_regnames_riscv): Make static.
* dwarf.h (init_dwarf_regnames_i386): Delete declaration.
(init_dwarf_regnames_iamcu): Delete declaration.
(init_dwarf_regnames_x86_64): Delete declaration.
(init_dwarf_regnames_aarch64): Delete declaration.
(init_dwarf_regnames_s390): Delete declaration.
(init_dwarf_regnames_riscv): Delete declaration.
Change-Id: I9e350f76f98f46e9e3dd88d502f2a2a83e44cb36
Adds a new API function init_dwarf_regnames_by_bfd_arch_and_mach to
initialise the register name state from a BFD architecture and machine
type.
There should be no user visible changes after this commit.
binutils/ChangeLog:
* dwarf.c (init_dwarf_regnames_by_bfd_arch_and_mach): New
function.
* dwarf.h (init_dwarf_regnames_by_bfd_arch_and_mach): Declare.
* objdump.c (dump_dwarf): Call new function instead of calling
specific initialization routines. Restrucure so that eh_addr_size
is still calculated correctly.
Change-Id: I346d665d2079a18ec4d04bd41893d0e9dc05e4b3
As part of a process to change how dwarf.c figures out the correct
name for a register I wanted to clean up how we initialise the
register name tracking state.
As part of this I rename init_dwarf_regnames to
init_dwarf_regnames_by_elf_machine_code, later commits will add a
different entry point to initialise the register name state.
There should be no user visible changes after this commit.
binutils/ChangeLog:
* dwarf.c (init_dwarf_regnames): Renamed to...
(init_dwarf_regnames_by_elf_machine_code): ...this.
* dwarf.h (init_dwarf_regnames): Renamed to...
(init_dwarf_regnames_by_elf_machine_code): ...this.
* readelf.c (process_file_header): Update call to use new name.
Change-Id: Ic8d2ef5fb62a8590ecd8cbb7e6258e11c6263594
Currently if a target has a large ( > 1024 ) number of registers then
we get a warning when dumping the DWARF whenever a register over the
1024 limit is referenced, this occurs in dwarf.c:frame_need_space.
This check was initially introduced to guard against corrupted DWARF
referencing stupidly large numbers of registers.
The frame_need_space function already has a check in place so that, if
a target specifies a set of known DWARF register names then we must
only reference a register within this set, it is only after this check
that we check for the 1024 limit.
What this means is that if a target DOES NOT define a set of known
register names and if we reference more than 1024 registers
frame_need_space will give a warning.
If a target DOES define a set of known registers and there are more
than 1024 defined registers, and we try to reference a register beyond
1024 we will again get an error.
This second case feels wrong to me. My thinking is that if a target
defines a set of registers then it is not unreasonable to assume the
tools can cope with that number of registers. And so, if the target
defines 2000 named DWARF registers, frame_need_space should allow
access to all of these registers.
If a target does not define a set of named registers then the 1024
limit should remain. This is pretty arbitrary, but we do need to have
some limit in place I think, so for now that seems as good as any.
This is an entirely theoretical fix - there are no targets that define
such large numbers of registers, but while experimenting with adding
support for RISC-V CSRs I ran into this issue and felt like it was a
good improvement.
binutils/ChangeLog:
* dwarf.c (frame_need_space): Compare dwarf_regnames_count against
0, and only warn about large numbers of registers if the number is
more than the dwarf_regnames_count.
Change-Id: Ifac1a999ff0677676e81ee373c4c044b6a700827
Pointer comparisons after adding an offset just don't work to catch
overflow when the offset is a larger type than the pointer.
PR 25018
* dwarf.c (get_type_signedness): Delete ineffective pointer
comparison check. Properly range check uvalue offset on
recursive call.
(read_and_display_attr_value): Range check uvalue offset before
calling get_type_signedness.
I don't see a need to calculate "ptr = start + uvalue" then compare
"ptr" with "start" and "end". Given "start <= end" on entry, the
"uvalue" comparison with "max_uvalue" ought to be sufficient to ensure
"start + uvalue" is bounded by "start" and "end" regardless of the
size of pointers and the unsigned dwarf_vma integer type.
* dwarf.c (check_uvalue): Remove unnecessary pointer checks.
PR 24829
* dwarf.c (check_uvalue): New function. Ensures that a block's
size is valid.
(read_and_display_attr_value): Use check_value when processsing
DW_FORM_block<n> attributes.
Given 32-bit pointers and a 64-bit bfd_size_type, it is relatively
easy to construct a value of augmentation_data_len (eg. 0x100000000)
that won't fail pointer checks but will print without bounds.
PR 24898
* dwarf.c (display_debug_frames): Use the read_cie check and error
for augmentation data length.
