dw2-ranges-overlap.exp creates a program where a psymtab has two
address ranges, and a function without debug info whose address is
between these two ranges. Then it sets a breakpoint on this function
and runs to it, expecting that the language should remain "auto; c"
when stopped.
However, this test case also has a "main" function described (briefly)
in the DWARF, and this function is given language C++. Also, a
breakpoint stop sets the current language to the language that was
used when setting the breakpoint.
My new DWARF scanner decides that this "main" is the main program and
sets the current language to C++ at startup, causing this test to
fail.
This patch fixes the test in a simple way, by introducing a new
function that takes the place of "main" in the DWARF. I think this
still exercises the original problem, but also avoids problems with my
branch.
It seemed safe to me to submit this separately.
With trying to load a non-executable file into gdb, we run into PR26880:
...
$ gdb -q -batch test.c
"0x7ffc87bfc8d0s": not in executable format: \
file format not recognized
...
The problem is caused by using %ps in combination with the error function
(note that confusingly, it does work in combination with the warning
function).
Fix this by using plain "%s" instead.
Tested on x86_64-linux.
gdb/ChangeLog:
2021-08-22 Tom de Vries <tdevries@suse.de>
PR gdb/26880
* gdb/exec.c (exec_file_attach): Use %s instead of %ps in call to
error function.
gdb/testsuite/ChangeLog:
2021-08-22 Tom de Vries <tdevries@suse.de>
PR gdb/26880
* gdb.base/non-executable.exp: New file.
The test-case gdb.dwarf2/dw2-ranges.exp is the only one in the gdb testsuite
that uses gas-generated stabs.
While the use seems natural alongside the use of gas-generated dwarf in the
same test-case, there are a few known issues, filed on the gdb side as:
- PR symtab/12497 - "stabs: PIE relocation does not work"
- PR symtab/28221 - "[readnow, stabs] FAIL: gdb.dwarf2/dw2-ranges.exp: \
info line func"
and on the gas side as:
- PR gas/28233 - "[gas, --gstabs] Generate stabs more similar to gcc"
The test-case contains a KFAIL for PR12497, but it's outdated and fails to
trigger.
The intention of the test-case is to test gas-generated dwarf, and using
gcc-generated stabs instead of gas-generated stabs works fine.
Supporting compiler-generated stabs is already a corner-case for gdb, and
there's no current commitment/incentive to support/workaround gas-generated
stabs, which can be considered a corner-case of a corner-case.
Work around these problem by using compiler-generated stabs in the test-case.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2021-08-22 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/dw2-ranges.exp: Use compiler-generated stabs.
Say one compiles a hello.c:
...
$ gcc -g hello.c
...
On openSUSE Leap 15.2 and Tumbleweed, the CU for hello.c is typically not the
first in .debug_info, nor the last, due to presence of debug information in
objects for sources like:
- ../sysdeps/x86_64/start.S
- init.c
- ../sysdeps/x86_64/crti.S
- elf-init.c
- ../sysdeps/x86_64/crtn.S.
On other systems, say ubuntu 18.04.5, the CU for hello.c is typically the
first and the last in .debug_info.
This difference has caused me to find some errors in the dwarf assembly
using openSUSE, that didn't show up on other platforms.
Force the same situation on other platforms by adding a dummy start
and end CU.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2021-08-22 Tom de Vries <tdevries@suse.de>
PR testsuite/28235
* lib/dwarf.exp (Dwarf::dummy_cu): New proc.
(Dwarf::assemble): Add dummy start and end CU.
When running test-case gdb.dwarf2/dw2-ranges-psym.exp with target board
-readnow, I run into:
...
(gdb) file dw2-ranges-psym^M
Reading symbols from dw2-ranges-psym...^M
Expanding full symbols from dw2-ranges-psym...^M
(gdb) set complaints 0^M
(gdb) FAIL: gdb.dwarf2/dw2-ranges-psym.exp: No complaints
...
The problem is that the regexp expects a gdb prompt immediately after the
"Reading symbols" line.
Fix this by updating the regexp.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2021-08-22 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (gdb_load_no_complaints): Update regexp to allow
"Expanding full symbols" Line.
The m32r Linux syscall emulation logic assumes the host environment
directly matches -- it's being run on 32-bit little endian Linux.
This breaks building for non-Linux systems, so put all the code in
__linux__ ifdef checks. This code needs a lot of love to make it
work everywhere, but let's at least unbreak it for non-Linux hosts.
In preparation for this script generating more files, change the output
argument to specify a directory. This drops the stdout behavior, but
since no one really runs this tool directly, it's not a big deal.
Put back 3 aborts where invalid lengths should have been filtered out.
gas/
PR binutils/28247
* testsuite/gas/i386/bad-bcast.s: Add a comment.
opcodes/
PR binutils/28247
* * i386-dis.c (OP_E_memory): Put back 3 aborts.
scan_dyntag is unnecessarily duplicated in solib-svr4.c and solib-dsbt.c.
Move this function to solib.c and rename it to gdb_bfd_scan_elf_dyntag.
Also add it to solib.h so it is included in both solib-svr4 and solib-dsbt.
Add a method to set the gcc target options for the ppc64 targets.
This change sets an empty value, which allows the gcc
default values (-mcmodel=medium) be used, instead of -mcmodel=large
which is set by the default_gcc_target_options hook.
Some targets, typically embedded without shared libraries, replace the
relocation symbol with a section symbol (see tc_fix_adjustable).
Allow the test to pass for such targets. Fixes the following.
avr-elf +FAIL: symver symver16
d10v-elf +FAIL: symver symver16
dlx-elf +FAIL: symver symver16
ip2k-elf +FAIL: symver symver16
m68k-elf +FAIL: symver symver16
mcore-elf +FAIL: symver symver16
pj-elf +FAIL: symver symver16
s12z-elf +FAIL: symver symver16
visium-elf +FAIL: symver symver16
z80-elf +FAIL: symver symver16
PR gas/28157
* testsuite/gas/symver/symver16.d: Relax reloc match.
Fixes a silly mistake in calculating the address of -Os out-of-line
register save/restore function copies. Copies of these linker defined
functions are added to stub sections when the original (in
target->savres_section) can't be reached.
* powerpc.cc (Target_powerpc::Relocate::relocate): Correct address
calculation of out-of-line save/restore function copies.
Code should not be using these directly, instead they should be
resolving these dynamically via cb_host_to_target_errno maps.
Fix the Blackfin code and remove the defines out of the header
so no new code can rely on them.
Now that ChangeLog entries are no longer used for sim patches,
this commit renames all relevant sim ChangeLog to ChangeLog-2021,
similar to what we would do in the context of the "Start of New
Year" procedure.
The purpose of this change is to avoid people merging ChangeLog
entries by mistake when applying existing commits that they are
currently working on.
Also throw in a .gitignore entry to keep people from adding new
ChangeLog files anywhere in the sim tree.
If I debug a single-thread program and look at the infrun debug logs, I
see:
[infrun] start_step_over: stealing global queue of threads to step, length = 2
That makes no sense... turns out there's a buglet in
thread_step_over_chain_length, "num" should be initialized to 0. I
think this bug is a leftover from an earlier version of the code (not
merged upstream) that manually walked the list, where the first item was
implicitly counted (hence the 1).
Change-Id: I0af03aa93509aed36528be5076894dc156a0b5ce
The numbers for the auxiliary registers "tlbindex" and
"tlbcommand" of ARCv2HS are incorrect. This patch makes
the following changes to correct that error.
,------------.-----------------.---------------.
| aux. reg. | old (incorrect) | new (correct) |
|------------+-----------------+---------------|
| tlbindex | 0x463 | 0x464 |
| tlbcommand | 0x464 | 0x465 |
`------------^-----------------^---------------'
opcodes/
2021-08-17 Shahab Vahedi <shahab@synopsys.com>
* arc-regs.h (DEF): Fix the register numbers.
The r_ldsomap field is specific to Solaris (part of librtld_db), and
should never be accessed for Linux. glibc is planning to add a field
to support multiple namespaces. But there will be no r_ldsomap when
r_version is bumped to 2. Add linux_[ilp32|lp64]_fetch_link_map_offsets
to set r_ldsomap_offset to -1 and use them for Linux targets.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28236
Update gdbserver to check r_version < 1 instead of r_version != 1 so
that r_version can be bumped for a new field in the glibc debugger
interface to support multiple namespaces. Since so far, the gdbserver
only reads fields defined for r_version == 1, it is compatible with
r_version >= 1.
All future glibc debugger interface changes will be backward compatible.
If there is ever the need for backward incompatible change to the glibc
debugger interface, a new DT_XXX element will be provided to access the
new incompatible interface.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=11839
Always run fp tests since the size of .tfloat, .ds.x, .dc.x and .dcb.x
directive outputs is always 10 bytes. There is no need for fp-elf32 nor
fp-elf64.
PR gas/28230
* testsuite/gas/i386/fp-elf32.d: Removed.
* testsuite/gas/i386/fp-elf64.d: Likewise.
* testsuite/gas/i386/fp.s: Remove NO_TFLOAT_PADDING codes.
* testsuite/gas/i386/i386.exp: Don't run fp-elf32 nor fp-elf64.
Always run fp.
.tfloat output should always be 10 bytes without padding, independent
of psABIs. In glibc, x86 assembly codes expect 10-byte .tfloat output.
This also reduces .ds.x output and .tfloat output with hex input from
12 bytes to 10 bytes to match .tfloat output.
PR gas/28230
* NEWS: Mention changes of .ds.x output and .tfloat output with
hex input.
* config/tc-i386.c (x86_tfloat_pad): Removed.
* config/tc-i386.h (X_PRECISION_PAD): Changed to 0.
(x86_tfloat_pad): Removed.
* testsuite/gas/i386/fp.s: If NO_TFLOAT_PADDING isn't defined,
add explicit paddings after .tfloat, .ds.x, .dc.x and .dcb.x
directives.
* testsuite/gas/i386/i386.exp (ASFLAGS): Append
"--defsym NO_TFLOAT_PADDING=1" when running the fp test.
On an internal test case, using an arm-elf target, commit ba5bc3e5a9
("Make DWARF evaluator return a single struct value") causes a
regression. (It doesn't happen for any of the other cross targets
that I test when importing upstream gdb.)
I don't know if there's an upstream gdb test case showing the same
problem... I can only really run native tests with dejagnu AFAIK.
The failure manifests like this:
Breakpoint 1, file_1.export_1 (param_1=<error reading variable: Unable to access DWARF register number 64>, str=...) at [...]/file_1.adb:5
Whereas when it works it looks like:
Breakpoint 1, file_1.export_1 (param_1=99.0, str=...) at [...]/file_1.adb:5
The difference is that the new code uses the passed-in gdbarch,
whereas the old code used the frame's gdbarch, when handling
DWARF_VALUE_REGISTER.
This patch restores the use of the frame's arch.
Commit 0579205aec ("Simplify dwarf_expr_context class interface")
caused a regression in the internal AdaCore test suite. I didn't try
to reproduce this with the GDB test suite, but the test is identical
to gdb.dwarf2/dynarr-ptr.exp.
The problem is that this change:
case DW_OP_push_object_address:
/* Return the address of the object we are currently observing. */
- if (this->data_view.data () == nullptr
- && this->obj_address == 0)
+ if (this->m_addr_info == nullptr)
... slightly changes the logic here. In particular, it's possible for
the caller to pass in a non-NULL m_addr_info, but one that looks like:
(top) p *this.m_addr_info
$15 = {
type = 0x29b7a70,
valaddr = {
m_array = 0x0,
m_size = 0
},
addr = 0,
next = 0x0
}
In this case, an additional check is needed. With the current code,
what happens instead is that the computation computes an incorrect
address -- but one that does not fail in read_memory, due to the
precise memory map of the embedded target in question.
This patch restores the old logic.
As breakpoint_modified observer is currently notified upon breakpoint stop
before handling auto-disabling when enable count is reached, the observer
is never notified of the disabling.
The problem affects:
- The MI interpreter enabled= value when reporting =breakpoint-modified
- A Python event handler for breakpoint_modified using the "enabled"
member of its parameter
- insight: breakpoint GUI window is not properly updated upon auto-disable
This patch moves the observer notification after the auto-disabling
code and implements corresponding tests for the MI and Python cases.
Fixes https://sourceware.org/bugzilla/show_bug.cgi?id=23336
Change-Id: I0c50df4789334071e5390cb46b3ca0d4a7f83c61
When a symbol removed by .symver is used in relocation and there is one
and only one versioned symbol, don't remove the symbol. Instead, mark
it to be removed and replace the removed symbol used in relocation with
the versioned symbol before generating relocation.
PR gas/28157
* symbols.c (symbol_flags): Add removed.
(symbol_entry_find): Updated.
(symbol_mark_removed): New function.
(symbol_removed_p): Likewise.
* symbols.h (symbol_mark_removed): New prototype.
(symbol_removed_p): Likewise.
* write.c (write_relocs): Call obj_fixup_removed_symbol on
removed fixp->fx_addsy and fixp->fx_subsy if defined.
(set_symtab): Don't add a symbol if symbol_removed_p returns true.
* config/obj-elf.c (elf_frob_symbol): Don't remove the symbol
if it is used on relocation. Instead, mark it as to be removed
and issue an error if the symbol has more than one versioned name.
(elf_fixup_removed_symbol): New function.
* config/obj-elf.h (elf_fixup_removed_symbol): New prototype.
(obj_fixup_removed_symbol): New.
* testsuite/gas/symver/symver11.d: Updated expected error
message.
* testsuite/gas/symver/symver16.d: New file.
* testsuite/gas/symver/symver16.s: Likewise.
It turns out we do need to backtrack when parsing after all. The
fill_opt component in the section rule swiches to EXPRESSION and back
to SCRIPT, and to find the end of an expression it is necessary to
look ahead one token.
* ldgram.y (section): Throw away lookahead NAME token.
(overlay_section): Likewise.
* testsuite/ld-elf/overlay.t: Add fill pattern on overlays.
Test fill pattern before stupidly named normal sections too,
and before /DISCARD/.
This tidies the states in which ld lexer rules are enabled.
This change will quite likely trip over issues similar to those
mentioned in the new ldlex.l comments, so please test it out.
* ldgram.y (wildcard_name): Remove now unnecessary components.
* ldlex.l: Restrict many rules' states. Remove -l expression
state rule. Comment on lookahead state madness and need for
/DISCARD/ in expression state.
I think these happened by accident, so let's see what breaks if they
are removed.
* ldlex.l: Remove lower case "absolute" and "sizeof_headers"
in non-mri mode.
* ld.texi: Remove sizeof_headers index.
* testsuite/ld-mmix/mmohdr1.ld: Use SIZEOF_HEADERS.
MRI mode generally doesn't flip lexer states, so let's make MRI mode
"extern" not do so either.
* ldgram.y (extern_name_list): Don't change lex state here.
(ifile_p1): Change state here on EXTERN instead.
I discovered some more errors when tightening up the lexer rules.
Just because we INCLUDE a file doesn't mean we've switched states.
PR 28217
* ldgram.y (statement): Don't switch lexer state on INCLUDE.
(mri_script_command, ifile_p1, memory_spec, section): Likewise.
PR 28168:
Stack overflow with a large float. %f is not a goot choice for this.
%f should be replaced with %.7g.
gas/
* testsuite/gas/csky/pr28168.d: New testcase for PR 28168.
* testsuite/gas/csky/pr28168.s: Likewise.
* testsuite/gas/csky/v2_float_part2.d: Following the new format.
* opcodes/csky-dis.c (csky_output_operand): %.7g replaces %f.
