The SEARCH insn is an oddball when it comes to parallel usage. It places a
big limit on what other insns it can run in parallel with, but we don't
currently track the amount of state needed to verify this (since no other insn
really requires this). Add a note for now in case we get around to it.
For many of the 32bit dsp shift related insns, we were just ignoring the HLs
field. The hardware does not though and will reject the insn if it's set
incorrectly. Update the sim to match.
We wrote a test case that tries every single 32bit opcode on the hardware
and compared it to the sim. There were a bunch of places in the sim where
we weren't strict enough (requiring certain parts of the opcode be set) so
we were treating a lot of invalid opcodes as valid ones. This sprinkles
out a lot additional checks in the dsp32alu class.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Since many people don't have a Blackfin toolchain available, only try to
regenerate the header file when in maintainer mode. This file rarely changes,
and when it does, we commit the generated output, so there's almost never a
need to run directly on an end system.
I noticed the sim code is using an old implementation of the maintainer logic.
I cut it over to the new macro (like gdb has been doing). In practice, it
makes no difference currently as nothing in the sim tree uses it, but I have a
follow up commit for the Blackfin tree that needs it.
There's no need to put the majority of the logic into the 3rd arg of the
AC_ARG_ENABLE. Coupled with the lack of indentation, it makes it hard to
follow, error prone to update, and duplicates code (with the 4th arg).
So pull the logic out of the 3rd arg and outside of the AC_ARG_ENABLE
macro. This allows us to gut the 4th arg entirely, merge with the code
that followed the macro, and fix bugs related to the new dv-sockser in
the process.
Hopefully building the various sims with the default sim-hardware
settings, as well as with explicit --{dis,en}able-sim-hardware flags,
should all just work now.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
When the sim is built w/out the bfroms, we end up passing a length of 0 when
mapping the rom region which the core sim code rejects. So add an alias field
equal to the length to avoid that error.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The latest gdb sim-remote.c really wants a return value from the fetch/store
register functions, so update the Blackfin sim to avoid the warnings/errors.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Newer BF54x parts feature an updated GPIO block where all the interrupt
handling is split off, so create a new model for the pin interrupts.
This is missing the port forwarding aspects, but at least the register
interface should be there.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
More ASTAT directed fixes, but this time at the dsp32shift insns.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This improves some of the arithmetic shifts to better match the
hardware (especially wrt ASTAT behavior). We hit areas where
the published documentation is thin so we have to rely on tests
run on the hardware to figure out how things should behave.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Now that we keep track of the exact parallel insn slot we're in, we can
make sure that the current insn being decoded is valid for that slot.
This brings us much closer to the hardware in flagging invalid parallel
insn combinations.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Some insns need to know which slot they're in to determine whether they
are valid. So add an enum for each slot, and check that rather than the
overall insn len. This makes tracking things in the code much clearer.
However, this code is functionally the same, so a follow up patch will
leverage this more to properly flag invalid parallel insn combos.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The amod1 helper includes a leading space so it can expand into the empty
string when need be, which means the caller need not add spacing itself.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Parallel insns can only do one 32bit, then two 16bits. So if we see
a 2nd 32bit insn after the first 32bit in a parallel insn, abort.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This fix the build time warning:
warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
machs.c: In function 'bfin_model_cpu_init':
machs.c:1657:1: warning: 'bfrom' may be used uninitialized
in this function [-Wuninitialized]
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Fix warning about mixing decls and code by moving auxvt_size decl
down to the scope where it is used.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The current code triggers a warning:
dv-bfin_sic.c: In function 'bfin_sic_finish':
dv-bfin_sic.c:930:41: warning: operation on 'sic-><U78e8>.bf54x.iwr1'
may be undefined [-Wsequence-point]
This points out the IWR2 register was not being setup because of a typo.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The place where these funcs get defined do not include the header that
declares their prototypes. Add that to fix -Wmissing-prototypes:
devices.c:59:1: warning: no previous prototype for 'dv_bfin_mmr_invalid'
devices.c:66:1: warning: no previous prototype for 'dv_bfin_mmr_require'
devices.c:99:1: warning: no previous prototype for 'dv_bfin_mmr_check'
devices.c:159:14: warning: no previous prototype for 'dv_get_bus_num'
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Before POSIX standardized strsignal(), old systems would hide the
prototype unless the normal extension defines were enabled. So use
the AC_USE_SYSTEM_EXTENSIONS helper for that.
Then make sure we include string.h ourselves in nrun.c rather than
relying on implicit includes via other sim headers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
From: Robin Getz <robin.getz@analog.com>
Overflow with shift operations happens independently of saturation, but
we have the logic merged. Extend the lshift function so that callers
can tell it when to handle each independently, and then do so when it's
needed.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
To make it easier to support ebiu banks at other addresses, move the base to
a runtime parameter rather than structure. Future work will make this more
dynamic, but I'm waiting for more details first.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
We had some workarounds for old linux/mii.h headers, but it breaks with
newer ones. So tweak the checks a bit to work with newer ones. We'll
worry about older systems once someone complains.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Parsing target addresses is hard if not generally useless, so use the new
cb_get_string function to lookup the associated strings as well. Now the
trace output is quickly useful instead of just marginally so.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Lift the code that GDB is using to generate dependencies on the fly and
port it over to the sim. Now people shouldn't have to manually maintain
these in their Makefile's.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Automake likes to dump macros automatically used into the aclocal.m4
file, but the common/aclocal.m4 naming prevents that. So rename it
to the more normal "acinclude.m4" so the aclocal tool can work.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Now that the sourceware tree generally requires autoconf-2.64, update
the sim tree to require that too.
This allows us to drop the long standing SIM_AC_COMMON/common.m4
workaround as autoconf 2.64+ seems to work for me.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The VIT_MAX insns can be used in parallel, so we need to use the store
buffer so we don't clobber the output register before we get a chance
to do a memory store with it.
Reported-by: Kai Iskratsch <kai@stella.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Since sim_do_command for many people simply calls sim_args_command, start
a unified version of it. For people who handle their own options, they
could switch to this by using sim_add_option_table instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The stat syscalls cannot work without a stat map, so declare one that
matches libgloss for virtual environments.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Now that the Blackfin libgloss code extracts the 2nd result and the
error code from the R1/R2 registers, have the sim fill them up.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The LSHIFT/ASHIFT insns that work with accumulators lacked AV/AVS
handling in the ASTAT register, so add it to match the hardware.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
If we're shifting accumulators, we don't want to touch the V bit in
ASTAT, so add size checks to the ashiftrt/lshiftrt helpers.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The logical shift insn does not sign extend before shifting, so
we shouldn't either.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This too should have been squashed into an earlier change. It covers
a few more cases in the V/VS saturation patch when working with TFU
and FU modes of dsp insns.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
