2005-10-20 H.J. Lu <hongjiu.lu@intel.com>
PR ld/251
* binutils-all/group.s: New file.
* binutils-all/objcopy.exp (objcopy_test_readelf): New
procedure.
Use it to test ELF group.
ld/testsuite/
2005-10-20 H.J. Lu <hongjiu.lu@intel.com>
PR ld/251
* ld-elf/group.2d: New file.
2005-10-19 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/1487
* binutils-all/objcopy.exp (objcopy_test): New procedure.
Use it to test simple copy, ia64 link order and ELF unknown
section type.
* binutils-all/unknown.s: New file.
ld/testsuite/
2005-10-19 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/1487
* ld-elf/unknown.d: New file.
nodes.
* ldlang.h (lang_new_vers_pattern): Add literal_p parameter.
* ldgram.y (vers_defns): Allow NAME as well as VERS_IDENTIFIER.
Adjust calls to lang_new_vers_pattern to pass literal_p argument.
* ldlang.c (lang_vers_match): Fix indentation. Do not glob-match
version nodes without a pattern.
(lang_new_vers_pattern): Add literal_p parameter.
(lang_do_version_exports_section): Pass it.
* ld-elfvers/vers.exp: Add vers31.
* ld-elfvers/vers31.c: New file.
* ld-elfvers/vers31.dsym: Likewise.
* ld-elfvers/vers31.map: Likewise.
* ld-elfvers/vers31.ver: Likewise.
2005-09-28 Jan Beulich <jbeulich@novell.com>
* gas/i386/x86-64-stack.s, gas/i386/x86-64-stack.d,
gas/i386/x86-64-stack-suffix.d, gas/i386/x86-64-stack-intel.d: New.
* gas/i386/i386.exp: Run new tests.
ld/testsuite/
2005-09-28 Jan Beulich <jbeulich@novell.com>
* ld-x86-64/tlspic.dd: Adjust.
opcodes/
2005-09-28 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (stack_v_mode): Renamed from branch_v_mode.
(indirEv): Use it.
(stackEv): New.
(Ob64, Ov64): Rename to Ob, Ov. Delete unused original definitions.
(dis386): Document and use new 'V' meta character. Use it for
single-byte push/pop opcode forms. Use stackEv for mod-r/m push/pop
opcode forms. Correct typo in 'pop ss'. Replace Ob64/Ov64 by Ob/Ov.
(putop): 'q' suffix for 'T' and 'U' meta depends on DFLAG. Mark
data prefix as used whenever DFLAG was examined. Handle 'V'.
(intel_operand_size): Use stack_v_mode.
(OP_E): Use stack_v_mode, but handle only the special case of
64-bit mode without operand size override here; fall through to
v_mode case otherwise.
(OP_REG): Special case rAX_reg ... rDI_reg only when 64-bit mode
and no operand size override is present.
(OP_J): Use get32s for obtaining the displacement also when rex64
is present.
extern NAME {}. Handle global, local and extern symbol names.
ld/testsuite/
* ld-elfvers/vers.exp: Add a new test, vers30.
* ld-elfvers/vers30.c: New file.
* ld-elfvers/vers30.map: New file.
* ld-elfvers/vers30.ver: New file.
* ld-elfvers/vers30.dsym: New file.
2005-08-03 H.J. Lu <hongjiu.lu@intel.com>
* elf32-i386.c (elf_howto_table): Undo the overflow change for
R_386_PC16 made on 2005-07-18.
* elf64-x86-64.c (x86_64_elf_howto_table): Undo the overflow
change for R_X86_64_PC16 made on 2005-07-18.
ld/testsuite/
2005-08-03 H.J. Lu <hongjiu.lu@intel.com>
* ld-i386/pcrel16.d: Updated.
* ld-i386/pcrel16.s: Likewise.
* ld-x86-64/pcrel16.d: Likewise.
2005-07-14 Jim Blandy <jimb@redhat.com>
* configure.in: Add cases for Renesas m32c.
* configure: Regenerated.
bfd/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for m32c-*-elf (Renesas m32c and m16c).
* Makefile.am (ALL_MACHINES): Add cpu-m32c.lo.
(ALL_MACHINES_CFILES): Add cpu-m32c.c.
(BFD32_BACKENDS): Add elf32-m32c.lo.
(BFD32_BACKENDS_CFILES): Add elf32-m32c.c.
(cpu-m32c.lo, elf32-m32c.lo): New rules, generated by 'make dep-am'.
* Makefile.in: Regenerated.
* archures.c (bfd_arch_m32c, bfd_mach_m16c, bfd_mach_m32c): New
arch and mach codes.
(bfd_m32c_arch): New arch info object.
(bfd_archures_list): List bfd_m32c_arch.
* bfd-in2.h: Regenerated.
* config.bfd: Add case for the m32c.
* configure.in: Add case for the m32c.
* configure: Regenerated.
* cpu-m32c.c, elf32-m32c.c: New files.
* libbfd.h: Regenerated.
* targets.c (bfd_elf32_m32c_vec): Declare.
(_bfd_target_vector): List bfd_elf32_m32c_vec.
binutils/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* readelf.c: #include "elf/m32c.h"
(guess_is_rela, dump_relocations, get_machine_name): Add cases for
EM_M32C.
* Makefile.am (readelf.o): Update dependencies.
* Makefile.in: Regenerated.
cpu/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* m32c.cpu, m32c.opc: Machine description for the Renesas M32C.
gas/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C.
* Makefile.am (CPU_TYPES): List m32c.
(TARGET_CPU_CFILES): List config/tc-m32c.c.
(TARGET_CPU_HFILES): List config/tc-m32c.h.
* configure.in: Add case for m32c.
* configure.tgt: Add cases for m32c and m32c-*-elf.
* configure: Regenerated.
* config/tc-m32c.c, config/tc-m32c.h: New files.
* doc/Makefile.am (CPU_DOCS): Add c-m32c.texi.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set M32C.
* doc/as.texinfo: Add text for the M32C-specific options and line
comment characters, and refer to c-m32c.texi.
* doc/c-m32c.texi: New file.
include/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* dis-asm.h (print_insn_m32c): New declaration.
include/elf/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for Renesas M32C and M16C.
* common.h (EM_M32C): New machine number.
* m32c.h: New file.
ld/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* Makefile.am (ALL_EMULATIONS): Add eelf32m32c.o.
(eelf32m32c.c): New target.
* Makefile.in: Regenerated.
* configure.tgt: Add case for m32c-*-elf.
* emulparams/elf32m32c.sh: New file.
opcodes/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New.
* m32c-desc.h, m32c-opc.h: New.
* Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h.
(CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c,
m32c-opc.c.
(ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo,
m32c-ibld.lo, m32c-opc.lo.
(CLEANFILES): List stamp-m32c.
(M32C_DEPS): List stamp-m32c, if CGEN_MAINT.
(CGEN_CPUS): Add m32c.
(m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c)
(m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS.
(m32c_opc_h): New variable.
(stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo)
(m32c-opc.lo): New rules.
* Makefile.in: Regenerated.
* configure.in: Add case for bfd_m32c_arch.
* configure: Regenerated.
* disassemble.c (ARCH_m32c): New.
[ARCH_m32c]: #include "m32c-desc.h".
(disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c.
(disassemble_init_for_target) [ARCH_m32c]: Same.
* cgen-ops.h, cgen-types.h: New files.
* Makefile.am (HFILES): List them.
* Makefile.in: Regenerated.
* ldexp.h: ..here. Add lang_mark_phase_enum.
(node_type): Remove etree_undef and etree_unspec.
(exp_data_seg): Delete.
(struct ldexp_control, expld): New.
(invalid, exp_mark_used_section): Delete.
(exp_fold_tree, exp_get_vma, exp_get_value_int, exp_get_fill,
exp_get_abs_int): Update prototypes.
* ldexp.c (assigning_to_dot): Delete.
(expld): Define.
(make_abs): Operate directly on expld.result. Update all callers.
(new_abs): Likewise. Return void.
(new_rel_from_abs): Rename from new_rel_from_section.
(new_rel, new_rel_from_abs): Operate on expld.result and return void.
Update all callers.
(fold_unary): Operate on expld.result and return void. Remove
"current_section", "allocation_done", "dot", "dotp" and "mark_used"
params. Update all callers.
(fold_binary, fold_trinary, fold_name, exp_fold_tree_1): Likewise.
(fold_unary <ALIGN_K>): Ensure alignment is absolute.
(fold_unary <ABSOLUTE>): Use make_abs.
(fold_unary <DATA_SEGMENT_END>): Evaluate mark_phase as for
allocating_phase.
(fold_binary <DATA_SEGMENT_ALIGN, DATA_SEGMENT_RELRO_END, >): Ditto.
(fold_binary <'%','/'>): Don't error if marking.
(fold_name <SIZEOF_HEADERS>): Don't call bfd_sizeof_headers when
marking.
(fold_name <NAME>): Remove FIXME; -R is handled correctly. Don't
error when marking.
(fold_name <ADDR, LOADADDR, SIZEOF>): Don't set SEC_KEEP.
(exp_fold_tree_1): Don't error when marking.
(exp_fold_tree_1 <etree_rel>): Evaluate in all phases except first.
(exp_fold_tree_1 <etree_assign to dot>): Don't check for NULL
current section, instead check for NULL dotp.
(exp_fold_tree_1 <etree_provide>): Don't evaluate the assignment
source unless the symbol is referenced and undefined.
(exp_fold_tree): Remove "allocation_done" and "dot" params. Save
params to expld.
(exp_fold_tree_no_dot): Remove "current_section", "allocation_done
and "mark_used" params. Save params to expld. Update all callers.
(exp_assop): Do without temp var.
(exp_print_tree <etree_undef>): Delete code.
(exp_get_vma): Remove "allocation_done" param. Correct error return.
(exp_get_fill, exp_get_abs_int): Likewise.
(exp_get_value_int): Remove "allocation_done" param.
(exp_mark_used_section): Delete.
* ldgram.y (fill_exp): Update exp_get_fill call.
(origin_spec, length_spec): Update exp_get_vma call.
* ldlang.c (lang_init): Don't bother clearing lang_statement_iteration.
(lang_mark_used_section_1, lang_mark_used_section): Delete.
(strip_excluded_output_sections): Call one_lang_size_sections_pass in
marking mode. Merge old lang_mark_used_section code. Correct handling
of output sections with excluded input sections and data statements.
Don't drop non-zero sized sections. Don't zap os->bfd_section.
Do set SEC_EXCLUDE when appropriate.
(print_output_section_statement): Update for changed ldexp.c
interface.
(print_assignment, lang_size_sections_1): Likewise.
(lang_do_assignments_1, lang_enter_output_section_statement): Likewise.
(lang_new_phdr, lang_record_phdrs): Likewise.
(lang_size_sections): Likewise.
(insert_pad): Use following statement if it is a pad, rather than
creating a new one.
(lang_size_sections_1 <lang_output_section_statement_enum>): Do
process ignored output section to set vma and lma, but don't
update dot for these sections. Don't error if marking.
(lang_size_sections_1 <lang_assignment_statement_enum>): Don't
update dot for ignored sections.
(lang_size_sections_1 <lang_data_statement_enum>): Don't mark absolute
section with SEC_ALLOC.
(one_lang_size_sections_pass): New function.
(lang_size_sections): Remove first five params. Set expld.phase on
entry and exit. Use one_lang_size_sections_pass.
(lang_do_assignments): Remove all params. Update all callers.
(lang_reset_memory_regions): Clear os->processed for all output
section statements.
* ldlang.h (lang_do_assignments): Update prototype.
(lang_size_sections): Likewise.
(one_lang_size_sections_pass): Declare.
* pe-dll.c (pe_dll_fill_sections, pe_exe_fill_sections): Update
lang_size_sections and lang_do_assignments calls.
* emultempl/elf32.em (layout_sections_again): Likewise.
* emultempl/ppc64elf.em (ppc_before_allocation): Use
one_lang_size_sections_pass.
* elf64-pcc.c (ppc64_elf_gc_mark_hook): For the local sym in .opd
case, include addend when indexing .opd section map.
(ppc64_elf_edit_opd): Add no_opd_opt param. Do nothing besides
clear opd_adjust array if no_opd_opt set. Tidy code.
* elf64-ppc.h (ppc64_elf_edit_opd): Update prototype.
ld/
* emultempl/ppc64elf.em (ppc_before_allocation): Always run
ppc64_elf_edit_opd.
2005-06-05 H.J. Lu <hongjiu.lu@intel.com>
* ldexp.c (exp_mark_used_section): Set SEC_KEEP on current
section only if the symbol will be defined.
ld/testsuite/
2005-06-05 H.J. Lu <hongjiu.lu@intel.com>
* ld-cris/hiddef1.d: Undo the last change.
* ld-cris/libdso-10.d: Likewise.
* ld-cris/libdso-2.d: Likewise.
PR 992
* ldexp.c (exp_mark_used_section): Set SEC_KEEP on current
section for etree_assign, etree_provide and etree_provided.
Call fold_binary on etree_binary.
* ldlang.c (lang_mark_used_section_1): Handle load base.
* ldlang.c (entry_symbol_default): New file-scope global.
(lang_finish): Use it, not a hardwired "start".
(lang_default_entry): Set it.
* ldlang.h: Declare lang_default_entry.
* emultempl/beos.em, emultempl/pe.em: Use lang_default_entry,
not lang_add_entry, to override default entry point symbol.
ld/testsuite:
* ld-scripts/align.exp: Mark align1 XFAIL on PECOFF targets.
* ld-scripts/data.exp: Mark data UNSUPPORTED on a.out targets.
* ld-scripts/provide.exp, ld-scripts/size.exp: Mark all tests
UNSUPPORTED on a.out targets. Tidy.
* bfd/elf32-ppc.c (struct ppc_elf_link_hash_entry): Add new field
has_sda_refs.
(ppc_elf_copy_indirect_symbol): Copy has_sda_refs.
(ppc_elf_check_relocs): Set has_sda_refs.
(ppc_elf_adjust_dynamic_symbol): Check has_sda_refs before eliminating
copy relocations. Use has_sda_refs to place variables in .sbss.
(ppc_elf_finish_dynamic_symbol): Use has_sda_refs to place variables in
.sbss.
ld/testsuite/
* ld-powerpc/sdalib.s, ld-powerpc/sdadyn.s, ld-powerpc/sdadyn.d: New
files.
* ld-powerpc/powerpc.exp: Run the new test.
* gas/Makefile.am: Have 'all' depend on 'info'.
* ld/Makefile.am: Have 'all' depend on 'info' and 'ld.1'.
* bfd/Makefile.in, binutils/Makefile.in, gas/Makefile.in
* ld/Makefile.in: Regenerate.
* arm.h: Import complete list of official relocation names
and numbers from AAELF. Define FAKE_RELOCs for old names.
Remove a few old names no longer used anywhere.
bfd:
* elf32-arm.c: Wherever possible, use official reloc names
from AAELF.
(elf32_arm_howto_table, elf32_arm_tls_gd32_howto)
(elf32_arm_tls_ldo32_howto, elf32_arm_tls_ldm32_howto)
(elf32_arm_tls_le32_howto, elf32_arm_tls_ie32_howto)
(elf32_arm_vtinherit_howto, elf32_arm_vtentry_howto)
(elf32_arm_pc11_howto, elf32_arm_thm_pc9_howto, elf32_arm_got_prel)
(elf32_arm_r_howto): Replace with elf32_arm_howto_table_1,
elf32_arm_howto_table_2, and elf32_arm_howto_table_3.
Add many new relocations from AAELF.
(elf32_arm_howto_from_type): Update to match.
(elf32_arm_reloc_map): Add entries for R_ARM_THM_JUMP24,
R_ARM_THM_JUMP11, R_ARM_THM_JUMP19, R_ARM_THM_JUMP8,
R_ARM_THM_JUMP6, R_ARM_GNU_VTINHERIT, and R_ARM_GNU_VTENTRY.
(elf32_arm_reloc_type_lookup): Use elf32_arm_howto_from_type.
(elf32_arm_final_link_relocate): Add support for
R_ARM_THM_JUMP24, R_ARM_THM_JUMP19, R_ARM_THM_JUMP6. Remove
case entries redundant with default.
* reloc.c: Reorganize ARM relocations. Add Thumb
assembler-internal relocations BFD_RELOC_ARM_T32_OFFSET_U8,
BFD_RELOC_ARM_T32_OFFSET_IMM, BFD_RELOC_ARM_T32_IMMEDIATE.
Add visible relocations BFD_RELOC_THUMB_PCREL_BRANCH7,
BFD_RELOC_THUMB_BRANCH20, BFD_RELOC_THUMB_BRANCH25.
Delete unused relocations BFD_RELOC_ARM_GOT12, BFD_RELOC_ARM_COPY.
* bfd-in2.h, libbfd.h: Regenerate.
opcodes:
* arm-dis.c (thumb_opcodes): Add disassembly for V6T2 16-bit
instructions. Adjust disassembly of some opcodes to match
unified syntax.
(thumb32_opcodes): New table.
(print_insn_thumb): Rename print_insn_thumb16; don't handle
two-halfword branches here.
(print_insn_thumb32): New function.
(print_insn): Choose among print_insn_arm, print_insn_thumb16,
and print_insn_thumb32. Be consistent about order of
halfwords when printing 32-bit instructions.
gas:
* hash.c (hash_lookup): Add len parameter. All callers changed.
(hash_find_n): New interface.
* hash.h: Prototype hash_find_n.
* sb.c: Include as.h.
(scrub_from_sb, sb_to_scrub, scrub_position): New statics.
(sb_scrub_and_add_sb): New interface.
* sb.h: Prototype sb_scrub_and_add_sb.
* input-scrub.c (input_scrub_include_sb): Use sb_scrub_and_add_sb.
* config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Remove
reference to BFD_RELOC_ARM_GOT12 which is never generated.
* config/tc-arm.c: Rewrite, adding Thumb-2 support.
gas/testsuite:
* gas/arm/arm.exp: Convert all existing "gas_test" tests to
"run_dump_test" tests. Run more tests unconditionally. Run new tests.
* gas/arm/arch4t.s, gas/arm/arch6zk.s, gas/arm/arm3.s, gas/arm/arm6.s
* gas/arm/arm7dm.s, gas/arm/bignum1.s, gas/arm/float.s
* gas/arm/immed.s, gas/arm/iwmmxt.s, gas/arm/offset.s, gas/arm/thumb.s:
Adjust to work as a dump test.
* gas/arm/arch4t.d, gas/arm/arch6zk.d, gas/arm/arm3.d, gas/arm/arm6.d
* gas/arm/arm7dm.d, gas/arm/bignum1.d, gas/arm/float.d
* gas/arm/immed.d, gas/arm/iwmmxt.d, gas/arm/offset.d, gas/arm/thumb.d:
New files.
* gas/arm/armv1-bad.l, gas/arm/armv1-bad.s: Remove tests for
diagnostics that don't happen in the first pass anymore.
* gas/arm/iwmmxt-bad.l, gas/arm/r15-bad.l, gas/arm/req.l
* gas/arm/vfp-bad.l:
Update expected diagnostics.
* gas/arm/pic.d: Update expected reloc name.
* gas/arm/thumbv6.d: CPY no longer appears in disassembly.
* gas/arm/r15-bad.s: Avoid two-argument mul.
* gas/arm/req.s: Adjust comments.
* gas/arm/maverick.d, gas/arm/maverick.s: Avoid inappropriate
use of PC.
* gas/arm/macro-1.d, gas/arm/macro1.s
* gas/arm/t16-bad.l, gas/arm/t16-bad.s
* gas/arm/tcompat.d, gas/arm/tcompat.s
* gas/arm/tcompat2.d, gas/arm/tcompat2.s
* gas/arm/thumb32.d, gas/arm/thumb32.s
New test pair.
ld/testsuite:
* ld-arm/mixed-app.d: Adjust expected disassembly a little.
associated with it.
elf32-arm.c (elf32_arm_final_link_relocate): Gracefully handle the situation
where a symbols's section is not known but a section relative R_ARM_RELATIVE
reloc has to be generated for the Symbian OS.
see if the same value is being used on the rhs as on the lhs.
(print_assignment): Call scan_for_self_assignment and if it
returns true, do no display the result of the computation but
instead just the final value of the symbol on the lhs.
* ld.texinfo: Document this behaviour and provide an example of
when it will happen.
2005-05-05 H.J. Lu <hongjiu.lu@intel.com>
* elflink.c (_bfd_elf_provide_section_bound_symbols): Use
"__bss_start" instead of "_edata" as fallback.
ld/
2005-05-05 H.J. Lu <hongjiu.lu@intel.com>
* scripttempl/elf.sc: Document the usage of __bss_start.
bfd/
* config.bfd: Use bfd_elf32_i386_vxworks_vec for i?86-*-vxworks.
* configure.in: Add bfd_elf32_i386_vxworks_vec. i386 targets need
elf-vxworks.lo.
* configure: Regenerate.
* Makefile.am (BFD32_BACKENDS): Add elf-vxworks.lo.
(BFD32_BACKENDS_CFILES): Add elf-vxworks.c.
(elf32-i386.lo): Depend on elf-vxworks.h.
(elf-vxworks.lo): New rule.
* Makefile.in: Regenerate.
* elf-bfd.h (elf_backend_data): Update type of
elf_backend_emit_relocs.
(_bfd_elf_link_output_relocs): Update prototype.
* elflink.c (_bfd_elf_link_output_relocs): Always use
bed->elf_backend_emit_relocs when outputting relocations.
* elfxx-target.h (elf_backend_emit_relocs): Default to
_bfd_elf_link_output_relocs.
* targets.c (bfd_elf32_i386_vxworks_vec): Declare.
(_bfd_target_vector): Add bfd_elf32_i386_vxworks_vec.
* elf32-i386.c: Add elf32-i386-vxworks target BFD.
(elf_i386_plt0_entry): Remove padding.
(elf_i386_pic_plt0_entry): Ditto.
(PLTRESOLVE_RELOCS_SHLIB, PLTRESOLVE_RELOCS): Define.
(PLT_NON_JUMP_SLOT_RELOCS): Define.
(elf_i386_link_hash_table): Add srelplt2, hgot, hplt, is_vxworks and
plt0_pad_byte fields.
(elf_i386_link_hash_table_create): Zero them.
(elf_i386_create_dynamic_sections): Create static relocation section.
(allocate_dynrelocs): Allocate space for static PLT relocations.
(elf_i386_size_dynamic_sections): Save shortcuts to PLT and GOT
symbols. Give PLT symbols function type. Don't strip PLT sections
if we have exported symbols from them.
(elf_i386_finish_dynamic_symbol): Fill in VxWorks PLT static
relocation section. Don't mark _GLOBAL_OFFSET_TABLE_ as absolute on
VxWorks.
(elf_i386_finish_dynamic_sections): Allow different pad bytes.
Add relocation for GOT location. Fill in PLT static relocations.
(elf_i386_vxworks_link_hash_table_create): New function.
(elf_i386_vxworks_link_output_symbol_hook): New function.
* elf-vxworks.h: New file.
gas/
* config/tc-i386.h (ELF_TARGET_FORMAT): Define for TE_VXWORKS.
gas/testsuite/
* gas/i386/i386.exp: Don't run divide test on vxworks.
ld/
* Makefile.am: Add eelf_i386_vxworks.
* Makefile.in: Regenerate.
* configure.tgt: Make i?86-*-vxworks use targ_emul=elf_i386_vxworks.
* emulparams/elf_i386_vxworks.sh: New file.
* emulparams/vxworks.sh: New file.
* scripttempl/elf.sc: Add DATA_END_SYMBOLS and ETEXT_NAME.
gas/testsuite/
* lib/gas-defs.exp (regexp_diff): Pass test if last line is "#...".
ld/testsuite/
* lib/ld-lib.exp (regexp_diff): Pass test if last line is "#...".
* ld-elfweak/elfweak.exp: Run size2.d.
* ld-elfwaek/size2.d: New file.
* ld-elfwaek/size2a.s: New file.
* ld-elfwaek/size2b.s: New file.
* emultempl/elf32.em (gld${EMULATION_NAME}_provide_bound_symbols):
Use the first SEC_ALLOC section which isn't SEC_READONLY or the
last SEC_ALLOC section if such a section doesn't exist.
* bfd/bfd-in2.h: Regenerate.
* bfd/elf32-arm.c (elf32_arm_link_hash_table): New field, 'use_blx'.
(elf32_arm_link_hash_table_create): Initialise fix_v4bx, use_blx.
(bfd_elf32_arm_set_target_relocs): Handle use_blx.
(elf32_arm_final_link_relocate): Use Thumb BLX for R_ARM_THM_PC22
relocations if requested to.
(allocate_dynrelocs): Don't count size of omitted Thumb stubs based on
use_blx rather than symbian_p.
(elf32_arm_finish_dynamic_symbol): Don't output Thumb PLT stubs if
use_blx is in effect.
(elf32_arm_symbian_link_hash_table_create): Enable use_blx by default
for SymbianOS.
* ld/ld.texinfo: Document --use-blx.
* ld/emultempl/armelf.em (use_blx): New variable.
(arm_elf_create_output_section_statements): Communicate value of
use_blx to bfd.
(PARSE_AND_LIST_PROLOGUE): Add OPTION_USE_BLX.
(PARSE_AND_LIST_OPTIONS): Add --use-blx option.
(PARSE_AND_LIST_ARGS_CASES): Add OPTION_USE_BLX case.
bfd/
Add TLS support for 64-bit Sparc ELF.
* elf64-sparc.c (sparc64_elf_dyn_relocs,
sparc64_elf_link_hash_entry, sparc64_elf_obj_tdata): New structs.
(GOT_UNKNOWN, GOT_NORMAL, GOT_TLD_GD, GOT_TLD_IE,
sparc64_elf_hash_entry, sparc64_elf_tdata,
sparc64_elf_local_got_tls_type): New defines.
(sparc64_elf_mkobject): New function.
(sparc64_elf_link_hash_table): Add members for dynamic linker
sections PLT, RELPLT, DYNBSS, and RELBSS. Add tls_ldm_got
uion to track TLS GOT references. Add sym_sec to cache
mappings from local sym to section.
(link_hash_newfunc): New function.
(sparc64_elf_bfd_link_hash_table_create): Rename to
sparc64_elf_link_hash_table_create for consistency.
Pass link_hash_newfunc to _bfd_elf_link_hash_table_init.
(sparc64_elf_create_dynamic_sections): Initialize new section
members of sparc64_elf_link_hash_table. Only init srelbss
if not-shared.
(sparc64_elf_copy_indirect_symbol, sparc64_elf_tls_transition):
New functions.
(SPARC_NOP): Define.
(sparc64_elf_build_plt, sparc64_elf_plt_entry_offset,
sparc64_elf_plt_ptr_offset): Delete.
(sparc64_plt_entry_build): New function to build PLT entries
gradually instread of all at once at the end of linking.
(sparc64_elf_check_relocs): Delete dynobj, sgot, and srelgot
local vars. Get them from sparc64_elf_hash_table instead.
Check early on if r_symndx is in bounds. Handle TLS transitions.
Account for TLS GOT references and DF_STATIC_TLS, as needed.
For TLS relocs, record the tls_type in either
sparc64_elf_local_got_tls_type or sparc64_elf_hash_entry as
appropriate. For R_SPARC_TLS_{GD,LDM}_CALL, emit a reference
to the __tls_get_addr symbol. For PLT relocs, track references
via h->plt.refcount. When R_SPARC_{PC10,PC22,PC_HH22,PC_HM10,
PC_LM22} and h not-NULL, set h->non_got_ref. For global data
symbol references, count the number of relocations needed for
that symbol. For default switch case, don't error, this lets
the TLS relocs not explicitly handled by this function get
accepted.
(sparc64_elf_gc_mark_hook, sparc64_gc_sweep_hook): New functions.
(sparc64_elf_adjust_dynamic_symbol): Remove dynobj local var, get
it from sparc64_elf_hash_table. Store the real PLT offset
in h->plt.offset, and build PLT entries one at a time. Also
get .dynbss section pointer from htab.
(allocate_dynrelocs, readonly_dynrelocs,
sparc64_omit_section_dynsym): New functions.
(sparc64_elf_omit_section_dynsym): Use these new functions as
helpers.
(dtpoff_base, tpoff): New functions.
(sparc64_elf_relocate_section): Kill dynobj, sgot, and splt
locals, get them from sparc64_elf_hash_table. Handle TLS
relocations and refcounting in main relocation loop.
(sparc64_elf_finish_dynamic_symbol): Use
sparc64_elf_link_hash_table. Build PLT entries as we see
them. Handle TLS GOT relocations.
(sparc64_elf_finish_dynamic_sections): Get sgot and dynobj
from sparc64_elf_hash_table. Initialize only PLT header
not all entries since we not build PLT entries one by one.
(elf_backend_copy_indirect_symbol, bfd_elf64_mkobject,
elf_backend_gc_mark_hook, elf_backend_gc_sweep_hook,
elf_backend_can_gc_sections, elf_backend_can_refcount): Define.
ld/testsuite/
* ld-selective/sel-dump.exp: Do not exclude sparc64-*.
* ld-selective/selective.exp: Likewise.
* ld-sparc/sparc.exp: Add {32,64}-bit prefix to test
names so we know which one is failing. Run sparc64 TLS
tests on multi-arch sparc platforms.
* ld-sparc/tls64.sd, ld-sparc/tlssunbin64.dd,
ld-sparc/tlssunbin64.rd, ld/testsuite/ld-sparc/tlssunbin64.sd,
ld-sparc/tlssunbin64.td, ld-sparc/tlssunnopic64.dd,
ld-sparc/tlssunnopic64.rd, ld-sparc/tlssunnopic64.sd,
ld-sparc/tlssunpic64.dd, ld-sparc/tlssunpic64.rd,
ld-sparc/tlssunpic64.sd, ld-sparc/tlssunpic64.td): Update now
that sparc64 ELF does support TLS.
* elf32-sparc.c (elf32_sparc_relocate_section,
R_SPARC_TLS_LDO_{HIX22,LOX10}): When not shared, transition to
R_SPARC_TLS_LE_{HIX22,LOX10}.
(elf32_sparc_relocate_section, R_SPARC_TLS_{LDO,LE}_HIX22): Only
xor relocation with 0xffffffff if R_SPARC_TLS_LE_HIX22.
(elf32_sparc_relocate_section, R_SPARC_TLS_{LDO,LE}_LOX10): Only
or 0x1c00 into relocation if R_SPARC_TLS_LE_HIX22.
* ld-sparc/tlssunbin32.dd: Update for TLS relocation fixes.
* ld-sparc/tlssunbin32.rd: Likewise.
* ld-sparc/tlssunbin32.sd: Likewise.
* ld-sparc/tlssunpic32.dd: Likewise.
* bfd/bfd-in2.h: Regenerate.
* bfd/elf32-arm.c (elf32_arm_is_target_special_symbol): Rename call to
bfd_elf32_is_arm_mapping_symbol_name.
(elf32_arm_output_symbol_hook): Likewise.
(arm_elf_find_function): Likewise, and include STT_NOTYPE in test for
mapping symbols.
(is_arm_mapping_symbol_name): Function moved from here...
* bfd/cpu-arm.c (bfd_elf32_is_arm_mapping_symbol_name): ...to here,
renamed and made global.
* gas/config/tc-arm.c (mapping_state): Change documentation in function
comment to cross-reference spec instead. Change type of mapping symbols
to BSF_NO_TYPE.
(arm_adjust_symtab): Don't change type of mapping symbols here.
* gas/testsuite/gas/arm/mapping.d: Update expected output.
* ld/testsuite/ld-arm/arm-app-abs32.d: Likewise.
* ld/testsuite/ld-arm/arm-app.d: Likewise.
* ld/testsuite/ld-arm/mixed-app.d: Likewise.
2005-03-23 Eric Christopher <echristo@redhat.com>
* elfxx-mips.c (MIPS_ELF_READONLY_SECTION): New.
(mips_elf_calculate_relocation): Use. Define DF_TEXTREL
after emitting relocation.
(_bfd_mips_elf_adjust_dynamic_symbol): Ditto.
(_bfd_mips_elf_check_relocs): Remove code to set DF_TEXTREL
and readonly_reloc.
ld/testsuite/ChangeLog:
2005-03-23 Eric Christopher <echristo@redhat.com>
* ld-mips-elf/textrel-1.s, ld-mips-elf/textrel-1.d: New
test.
* ld-mips-elf/mips-elf.exp: Call it.
* ld-mips-elf/rel32-n32.d: Update for DF_TEXTREL removal.
* ld-mips-elf/rel32-o32.d: Ditto.
* ld-mips-elf/rel64.d: Ditto.
2005-03-22 H.J. Lu <hongjiu.lu@intel.com>
* bfd-in.h (_bfd_elf_provide_symbol): New.
* bfd-in2.h: Regenerated.
* elf32-ppc.c (set_linker_sym): Moved to elflink.c.
(ppc_elf_set_sdata_syms): Call _bfd_elf_provide_symbol instead
of set_linker_sym.
* elflink.c (_bfd_elf_provide_symbol): New. Moved and renamed
from elf32-ppc.c.
ld/
2005-03-22 H.J. Lu <hongjiu.lu@intel.com>
* emultempl/elf32.em (gld${EMULATION_NAME}_provide_bound_symbols): New
(gld${EMULATION_NAME}_finish): Call
gld${EMULATION_NAME}_provide_bound_symbols to provide
__preinit_array_start, __preinit_array_end, __init_array_start,
__init_array_end, __fini_array_start and __fini_array_end.
* scripttempl/elf.sc: Don't provide __preinit_array_start,
__preinit_array_end, __init_array_start, __init_array_end,
__fini_array_start nor __fini_array_end.
* elflink.c (elf_link_add_object_symbols): Set SEC_EXCLUDE on
.gnu.warning.* sections.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation): Set
SEC_EXCLUDE on .gnu.warning sections.
* elf32-ppc.c (struct elf_linker_section): Remove sym_hash and
sym_offset. Add name, bss_name, sym_name, sym_val.
(struct ppc_elf_link_hash_table): Remove sdata and sdata2 pointers.
Add sdata array of elf_linker_section_t.
(ppc_elf_link_hash_table_create): Set name, sym_name, and bss_name.
(enum elf_linker_section_enum): Delete.
(ppc_elf_create_linker_section): Rewrite. Don't create syms here.
(ppc_elf_check_relocs): Delay ppc_elf_create_linker_section until
the special sections are needed. Adjust htab->sdata refs.
Ensure dynobj is set in sreloc code.
(ppc_elf_size_dynamic_sections): Strip sdata sections.
(ppc_elf_set_sdata_syms): New function.
(elf_finish_pointer_linker_section): Use 0x8000 for sym_offset.
(ppc_elf_relocate_section): Adjust references to htab->sdata. Use
sym_val instead of sym_hash.
* elf32-ppc.h (ppc_elf_set_sdata_syms): Declare.
ld/
* emultempl/ppc32elf.em (gld${EMULATION_NAME}_after_allocation): New
function.
(LDEMUL_AFTER_ALLOCATION): Define.
