gdb/ChangeLog:
* top.c (print_gdb_version): Update copyright year in version output.
gdb/gdbserverChangeLog:
* server.c (gdbserver_version): Update copyright year in version
output.
* gdbreplay.c (gdbreplay_version): Ditto.
Building gdbserver for nommu targets atm fails with:
linux-low.c: In function 'linux_tracefork_child':
linux-low.c:4151: error: pointer of type 'void *' used in arithmetic
So cast the void* to a char*.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
recursively invoke make for install-only.
* data-directory/Makefile.in: Add FLAGS_TO_PASS variable.
(install): Pass FLAGS_TO_PASS when recursively make install-only.
gdbserver/
* Makefile.in: Add FLAGS_TO_PASS variable.
(install): Remove dependency of install-only and recursively
invoke make for install-only.
gdb/
* amd64-linux-nat.c (compat_siginfo_from_siginfo)
(siginfo_from_compat_siginfo): Also copy si_pid and si_uid when
si_code is < 0. Check for si_code == SI_TIMER before checking for
si_code < 0.
gdb/gdbserver/
* linux-x86-low.c (compat_siginfo_from_siginfo)
(siginfo_from_compat_siginfo): Also copy si_pid and si_uid when
si_code is < 0. Check for si_code == SI_TIMER before checking for
si_code < 0.
* amd64-linux-nat.c (compat_siginfo_from_siginfo)
(siginfo_from_compat_siginfo): Also copy si_pid and si_uid when
si_code is < 0. Check for si_code == SI_TIMER before checking for
si_code < 0.
gdb/gdbserver/
* linux-x86-low.c (compat_siginfo_from_siginfo)
(siginfo_from_compat_siginfo): Also copy si_pid and si_uid when
si_code is < 0. Check for si_code == SI_TIMER before checking for
si_code < 0.
This patch adds support for x86 LynxOS (tested on LynxOS 5.0).
gdb/gdbserver/ChangeLog:
* lynx-i386-low.c: New file.
* configure.srv: Add handling of i[34567]86-*-lynxos* targets.
Some of the PTRACE_ macros/values were removed in LynxOS 5.x.
Since we have not use them so far, the chances that we will use them
one day are very small. So I decided to delete them.
gdb/gdbserver/ChangeLog:
* lynx-low.c (ptrace_request_to_str): Remove handling for
request values that have been removed in LynxOS 5.x.
This is one of the changes needed in order to build gdbserver on
LynxOS 5.x.
Really interesting: On LynxOS 4.x, there is a #warning when sys/ptrace.h
is used (explaining that ptrace.h will be used instead), whereas this
file was removed from LynxOS 5.x. The contents of sys/ptrace.h on 4.x
(or at least the meat of it):
#if defined(__GNUC__) || defined(__GNUG__)
#if !defined(__NO_INCLUDE_WARN__)
#warning Using <ptrace.h> instead of <sys/ptrace.h>
#endif /* defined(__NO_INCLUDE_WARN__) */
#endif /* defined(__GNUC__) || defined(__GNUG__) */
#include <ptrace.h>
The fix I went for, for now, is to just include <sys/ptrace.h>
unconditionally. I could have done some configury, but we already
have to build with -D__NO_INCLUDE_WARN__ to avoid the warnings
anyway, and that's unvoidable, due to system includes themselves
including the "wrong" header file.
Since <sys/ptrace.h> seems to be the choice that was made for LynxOS,
and since it works to include it on LynxOS 4.x, I think that's the simplest
solution.
gdb/gdbserver/ChangeLog:
* lynx-low.c, lynx-ppc-low.c: Include <sys/ptrace.h> instead of
<ptrace.h>
* corelow.c (core_open): Use target_signal_from_host if CORE_GDBARCH
is NULL.
* fork-child.c (startup_inferior) <resume_signal>: Use enum
target_signal type.
* linux-nat.c (linux_nat_resume): Use target_signal_to_host before
calling strsignal. Use enum target_signal type for saved_signo.
(linux_handle_extended_wait) <signo>: Use enum target_signal type.
(linux_nat_wait_1): Use enum target_signal type for signo. Use
target_signal_to_host before calling strsignal.
* remote-m32r-sdi.c (m32r_wait, m32r_detach): Replace 0 by
TARGET_SIGNAL_0.
gdb/gdbserver/
* target.c (mywait) <TARGET_WAITKIND_EXITED>: Fix to use INTEGER.
This patch adds support for powerpc-lynxos.
gdbserver/ChangeLog:
* gdbserver/lynx-low.c, gdbserver/lynx-low.h,
gdbserver/lynx-ppc-low.c: New files.
* Makefile.in (lynx_low_h): New variable.
(lynx-low.o, lynx-ppc-low.o): New rules.
* configure.ac: On LynxOS, link with -lnetinet.
* configure.srv: Add handling of powerpc-*-lynxos* targets.
* configure: regenerate.
vasprintf and vsnprintf are not available on LynxOS, at least not on
version 4.0.0. This patch updates the configury to import them from
libiberty if not available out of the box.
gdbserver/
* Makefile.in (vasprintf.o, vsnprintf.o): New rules.
* configure.ac: Add check for vasprintf and vsnprintf.
* configure, config.in: Regenerate.
* server.h (vasprintf, vsnprintf): Add conditional declarations.
I will need this description for the ppc-lynxos debugger where, AFAICT,
we only have access to the core GP and FP registers. So this adds
powerpc-32 to the list of targets for which a .dat file needs to be
generated.
2010-04-30 Joel Brobecker <brobecker@adacore.com>
* features/Makefile (WHICH): Add rs6000/powerpc-32.
(powerpc-32.o, powerpc-32.c): New rules.
(clean): Also remove powerpc-32.c.
* regformats/rs6000/powerpc-32.dat: Generate.
This patch moves all includes of malloc.h, which were introduced
purely to get access to alloca's declaration, to server.h, next
to the include of alloca.h.
There is one exception: gdbreplay.c, which does not include server.h.
In this case, the include of alloca.h was simply moved up a bit, next
to the include of malloc.h.
gdb/gdbserver/ChangeLog:
* gdbreplay.c: Move include of alloca.h up, next to include of
malloc.h.
* server.h: Add include of malloc.h.
* mem-break.c: Remove include of malloc.h.
* server.c, tracepoint.c, utils.c, win32-low.c: Likewise.
This reproduces the same approach as in GDB to allow us to build
specific files without -Werror.
gdb/gdbserver/ChangeLog:
* Makefile.in (INTERNAL_CFLAGS_BASE): New variable. Extracted
from INTERNAL_CFLAGS.
(INTERNAL_WARN_CFLAGS): New variable.
(INTERNAL_CFLAGS): Adjust, using INTERNAL_WARN_CFLAGS.
snprintf is not available on LynxOS, so I changed the calls to snprintf
to calls to xsnprintf, which should be strictly equivalent.
gdb/gdbserver/ChangeLog:
* utils.c (xsnprintf): Make non-static.
* server.h: Add xsnprintf declaration.
* linux-low.c, nto-low.c, target.c, thread-db.c, tracepoint.c:
replace calls to snprintf by calls to xsnprintf throughout.
On LynxOS, alloca is defined in allocal.h. This fixes one warning that
occurs when building GDBserver for LynxOS.
gdb/gdbserver/ChangeLog:
* configure.ac: Add configure check for alloca.
* configure, config.in: Regenerate.
* server.h: Include alloca.h if it exists.
* gdbreplay.c: Include alloca.h if it exists.
(linux_create_inferior): Check for __ANDROID__ rather than
__SIGRTMIN.
(enqueue_one_deferred_signal): Don't requeue non-RT signals that
are already deferred.
(linux_wait_1): Check for __ANDROID__ rather than __SIGRTMIN.
(linux_resume_one_thread): Don't queue a SIGSTOP if the lwp is
stopped and already has a pending signal to report.
(proceed_one_lwp): : Don't queue a SIGSTOP if the lwp already has
a pending signal to report or is moving out of a jump pad.
(linux_init_signals): Check for __ANDROID__ rather than
__SIGRTMIN.
(WERROR_CFLAGS): New.
(INTERNAL_CFLAGS): Add WERROR_CFLAGS.
* configure.ac: Introduce --enable-werror, which adds -Werror to
the compiler command line. Enabled by default. Disable with
--disable-werror. Add -Wdeclaration-after-statement
Wpointer-arith and -Wformat-nonliteral to warning flags.
* configure: Regenerate.
(WERROR_CFLAGS): New.
(INTERNAL_CFLAGS): Add WERROR_CFLAGS.
* configure.ac: Introduce --enable-werror, which adds -Werror to
the compiler command line. Enabled by default. Disable with
--disable-werror. Add -Wdeclaration-after-statement
Wpointer-arith and -Wformat-nonliteral to warning flags.
* configure: Regenerate.
(gdbchar): New.
(expect): Use gdbchar. Check for error reading from GDB.
Clarify sync error output.
(play): Check for errors writing to GDB.
* linux-low.c (sigchld_handler): Really ignore `write' errors.
* remote-utils.c (getpkt): Check for errors writing to the remote
descriptor.
* server.c (push_event, queue_stop_reply_callback): Assert we're
not pushing a TARGET_WAITKIND_IGNORE event.
(start_inferior, start_inferior, attach_inferior, handle_v_cont)
(myresume, handle_target_event): Set the thread's last_resume_kind
and last_status from the target returned status.
* linux-x86-low.c (update_debug_registers_callback): New.
(i386_dr_low_set_addr): Use it.
(i386_dr_low_get_addr): New.
(i386_dr_low_set_control): Use update_debug_registers_callback.
(i386_dr_low_get_control): New.
(i386_dr_low_get_status): Adjust.
* linux-low.c (linux_stop_lwp): New.
* linux-low.h (linux_stop_lwp): Declare.
* i386-low.c (I386_DR_GET_RW_LEN): Take the dr7 contents as
argument instead of a i386_debug_reg_state.
(I386_DR_WATCH_HIT): Take the dr6 contents as argument instead of
a i386_debug_reg_state.
(i386_insert_aligned_watchpoint): Adjust.
(i386_remove_aligned_watchpoint): Adjust.
(i386_low_stopped_data_address): Read the debug registers from the
inferior instead of from the mirrors.
* i386-low.h (struct i386_debug_reg_state): Extend comment.
(i386_dr_low_get_addr): Declare.
(i386_dr_low_get_control): Declare.
(i386_dr_low_get_status): Change prototype.
* win32-i386-low.c (dr_status_mirror, dr_control_mirror): New globals.
(i386_dr_low_get_addr): New.
(i386_dr_low_get_control): New.
(i386_dr_low_get_status): Adjust prototype. Return
dr_status_mirror.
(i386_initial_stuff): Clear dr_status_mirror and
dr_control_mirror.
(i386_get_thread_context): Adjust.
(i386_set_thread_context): Adjust.
(i386_thread_added): Adjust.
(gdb_wants_all_stopped): Delete.
(linux_wait_1): Don't call them.
* server.c (handle_v_cont): Tag all threads as want-stopped.
(gdb_wants_thread_stopped): Fix comments. Tag the thread that
stopped as "client-wants-stopped".
* common/signals.c (signals): Move the content to signals.def.
Include it. Remove the INDENT comments.
gdb/gdbserver/
* Makefile.in (signals_def): New.
(server_h): Append include/gdb/signals.h and signals_def.
(server.o): Append signals_def.
include/gdb/
* signals.h (enum target_signal): Move the content to signals.def.
Include it.
* signals.def: New file.
