This simplifies the build a bit (especially for deps in port subdirs),
and avoids recursive make. This in turn speeds up the build, and sets
us up for multi-target.
I see the following error for --target=microblaze-elf:
../../../sim/microblaze/interp.c: In function 'sim_engine_run':
../../../sim/microblaze/interp.c:147:39: error: passing argument 2 of 'get_insn_microblaze' from incompatible pointer type [-Werror=incompatible-pointer-types]
147 | op = get_insn_microblaze (inst, &imm_unsigned, &insn_type,
| ^~~~~~~~~~~~~
| |
| int *
In file included from ../../bfd/bfd.h:45,
from ../../../sim/microblaze/interp.c:24:
../../../sim/microblaze/../../opcodes/microblaze-dis.h:34:57: note: expected '_Bool *' but argument is of type 'int *'
34 | extern enum microblaze_instr get_insn_microblaze (long, bool *,
| ^
sim/microblaze/ChangeLog:
* interp.c (sim_engine_run): Use bool instead of int.
These use the same pattern as seen in the opcodes/ dir and in automake
in general (ish). This helps simplify the boilerplate for building and
linking build-time code, and fixes some inconsistency in flag usage.
For rules that were compiling+linking in a single step, split them into
separate steps so we can apply the correct set of options. This matches
automake behavior too.
The sim's recently switch to using Automake caused a build failure for
me, because I didn't have the correct auto* tools in my path.
However, the rule in the tree is that this is not needed in general.
This patch adds a call to AM_MAINTAINER_MODE, to align the sim with
the way the rest of the tree works here.
sim/ChangeLog
2021-03-08 Tom Tromey <tromey@adacore.com>
* aclocal.m4, configure, Makefile.in: Rebuild.
* configure.ac: Use AM_MAINTAINER_MODE.
This hasn't been initialized anywhere for years. It used to be for
passing in the path to libiberty, but that stopped happening long ago.
Delete it to simplify the build logic.
This local macro doesn't take any args, so adjust the API to match.
No one really noticed as this is behind code that is not normally
built, only when a dev specifically tries to compile it.
While the configure script was checking for a bunch of headers, only
one of them was conditionally included in the source (unistd.h). The
rest were always included. Based on those usage this whole time, we
can reasonably assume that the build also has unistd.h.
All the other files including config.h never actually used any defines
from the header.
Rather than require $AR be set and then default to `ar`, use the
standard AC_CHECK_TOOL helper to find a good prefixed tool. In
practice this shouldn't change much as we seem to have macros in
the tree that were already setting it up, but we shouldn't rely
on that implicitly.
All the scripts were using this implicitly already, so there's no real
change for them, but we want to call it explicitly as the CPP tool is
used to generate nltvals.def.
We don't need a variable to add a dependency to the "all" target, and
having one doesn't really add value. Switch to the target directly for
the few ports that actually use this.
This file is quite large and is getting unmanageable. Split it apart
to follow aclocal best practices by putting one-macro-per-file. There
shouldn't be any real functional changes here as can be seen in the
configure script regens.
This is needed to move to automake & its dejagnu-provided logic,
and eventually by the unified sim logic. The $arch is used only
to figure out which `run` program to use when running tests, and
as we move to a single top-level build, we can delete this and
use sim/run directly.
Current toolchains warn about unused result from fread, so mitigate
the edge case if fread returns short data. It's not great, but it
gets things building again.
Rather than hand maintain m4 includes in various autotool files,
use AC_CONFIG_MACRO_DIRS to declare the relevant search paths.
This simplifies the code, makes it more robust, and cleans out
unused logic from configure.
The rx simulator now has no build warnings. Delete the call to
SIM_AC_OPTION_WARNINGS in configure.ac, the default yes will be
provided by SIM_AC_OUTPUT.
sim/rx/ChangeLog:
* configure: Regenerate.
* configure.ac (SIM_AC_OPTION_WARNINGS): Delete call.
Pointer arithmetic on void * pointers results in a GCC warning. Avoid
the warning by casting the pointer to its actual type earlier in the
function.
sim/rx/ChangeLog:
* mem.c (mem_put_blk): Rename parameter, add cast from parameter
type to local type. Remove cast later in the function.
(mem_get_blk): Likewise.
* mem.h (mem_put_blk): Rename parameter to match definition.
(mem_get_blk): Likewise.
In load.c there's some GCC warnings about undefined
functions (bfd_get_elf_phdr_upper_bound and bfd_get_elf_phdrs). To
get the declarations of these functions include 'elf-bfd.h'. This
headers also pulls in other elf related headers, like 'elf/internal.h'
and 'elf/common.h', so these no longer need to be explicitly included
from load.c.
In trace.c and include for trace.h is missing, again this results in
GCC warnings for missing function declarations.
sim/rx/ChangeLog:
* load.c: Replace 'elf/internal.h' and 'elf/common.h' includes
with 'elf-bfd.h' include.
* trace.c: Add 'trace.h' include.
Silence a GCC compiler warning by using PRIx64 in printf format string
instead of hard coded "llx".
sim/rx/ChangeLog:
* reg.c (trace_register_changes): Use PRIx64 in printf format
string.
For sim code variables still need to be declared at the start of the
enclosing block. This silences a few GCC warnings.
sim/rx/ChangeLog:
* syscalls.c (rx_syscall): Move declaration of some variables to
the start of the enclosing block.
* trace.c (load_file_and_line): Likewise.
Calling printf with the format being a non constant string results in
a GCC warning:
warning: format not a string literal and no format arguments [-Wformat-nonliteral]
Provide a constant format string to printf in the few places this
warning is triggered.
sim/rx/ChangeLog:
* reg.c (fpsw2str): Provide a format string to printf.
(trace_register_changes): Likewise.
Some functions that should be marked static.
sim/rx/ChangeLog:
* fpu.c (check_exceptions): Make static.
* gdb-if.c (handle_step): Likewise.
* mem.c (mem_put_byte): Likewise.
While experimenting with switching on warnings for the rx simulator I
discovered this bug. In sim_do_command we get passed a 'const char *'
argument. We create a copy of this string to work with locally, but
then while processing this we accidentally switch back to reference
the original string.
sim/rx/ChangeLog:
* gdb-if.c (sim_do_command): Work with a copy of the command.
The rx simulator doesn't define sim_memory_map and so fails to link
with GDB. Define it now to return NULL, this can be extended later to
return an actual memory map if anyone wants this functionality.
sim/rx/ChangeLog:
* gdb-if.c (sim_memory_map): New function.
These ports don't use the common sim core, so they weren't providing
a sim_memory_map for gdb, so they failed to link with the new memory
map logic added for the sim. Add stubs to fix.
Few arches implement STATE_WATCHPOINTS()->pc while all of them implement
sim_pc_get. Lets switch the sim-watch core for monitoring pc events to
the sim_pc_get API so this module works for all ports, and then we can
delete this old back channel of snooping in the port's cpu state -- the
code needs the pointer to the pc storage so that it can read out bytes
and compare them to the watchrange.
This also fixes the logic on multi-cpu sims by removing the limitation
of only being able to watch CPU0's state.
The AC_CONFIG_HEADER macro is long deprecated, so switch to the
newer form. This also gets rid of the position limitation, and
drops support for an argument to SIM_AC_COMMON which we haven't
used anywhere.
These settings might have made sense in darker compiler times, but I
think they're largely obsolete now. Looking through the values that
get used in HDEFINES, it's quite limited, and configure itself should
handle them. If we still need something, we can leverage standard
autoconf macros instead, after we get a clear user report.
TDEFINES was never set anywhere and was always empty, so prune that.
This is a hand-written implementation that should have fairly complete
coverage for the base integer instruction set ("i"), and for the atomic
("a") and integer multiplication+division ("m") extensions. It also
covers 32-bit & 64-bit targets.
The unittest coverage is a bit weak atm, but should get better.
We renamed these years ago, but it looks like the cgen core missed the
TRACE_EXTRACT function, so these new ports still used the incompatible
common name. Fix those ports to use the right func.
When compiling we get the following warnings:
common/cgen-accfp.c: In function 'fixsfsi':
common/cgen-accfp.c:370:18: warning: pointer targets in passing argument 1 of 'sim_fpu_to32i' differ in signedness [-Wpointer-sign]
sim_fpu_to32i (&res, &op1, sim_fpu_round_near);
^
common/cgen-accfp.c: In function 'fixdfsi':
common/cgen-accfp.c:381:18: warning: pointer targets in passing argument 1 of 'sim_fpu_to32i' differ in signedness [-Wpointer-sign]
sim_fpu_to32i (&res, &op1, sim_fpu_round_near);
^
This port only had one minor warning left in it, so fix it and then
enable -Werror behavior by deleting the macro call. We'll use the
common default now (which is -Werror).
