While .linefile is generally intended for gas internal use only, its use
in a source file would better not result in an internal error. Give use
of it outside of any macro(-like) construct the meaning of restoring the
original (physical) input file name.
This patch provides a new function to sanity check section sizes.
It's mostly extracted from what we had in bfd_get_full_section_contents
but also handles compressed debug sections.
Improvements are:
- section file offset is taken into account,
- added checks that a compressed section can be read from file.
The function is then used when handling multiple .debug_* sections
that need to be read into a single buffer, to sanity check sizes
before allocating the buffer.
PR 26946, PR 28834
* Makefile.am (LIBBFD_H_FILES): Add section.c.
* compress.c (bfd_get_full_section_contents): Move section size
sanity checks..
* section.c (_bfd_section_size_insane): ..to here. New function.
* dwarf2.c (read_section): Use _bfd_section_size_insane.
(_bfd_dwarf2_slurp_debug_info): Likewise.
* Makefile.in: Regenerate.
* libbfd.h: Regenerate.
This option compresses output debug sections with zstd and sets ch_type
to ELFCOMPRESS_ZSTD. Latest gdb and lldb support ELFCOMPRESS_ZSTD.
There will be an error if zstd is not enabled at configure time.
error: --compress-debug-sections=zstd: gold is not built with zstd support
The parser for boolean rules fails to skip over the , separator in
the options which makes it hang forever. No dc files in the tree
use boolean rules atm which is why no one noticed.
To make it clear this is an input to the igen tool, rename it with an
igen extension. This matches the other files in the ppc dir (altivec
& e500 igen files), and the other igen ports (mips, mn10300, v850).
(%dx) isn't a valid memory address in any modes. It is used as a special
memory operand for input/output port address in AT&T syntax and should
only be used with input/output instructions. Update i386_att_operand to
set i.input_output_operand to true for (%dx) and issue an error if (%dx)
is used with non-input/output instructions.
PR gas/29751
* config/tc-i386.c (_i386_insn): Add input_output_operand.
(md_assemble): Issue an error if input/output memory operand is
used with non-input/output instructions.
(i386_att_operand): Set i.input_output_operand to true for
(%dx).
* testsuite/gas/i386/inval.l: Updated.
* testsuite/gas/i386/x86-64-inval.l: Likewise.
* testsuite/gas/i386/inval.s: Add tests for invalid (%dx) usage.
* testsuite/gas/i386/x86-64-inval.s: Likewise.
I saw this failure on a CI:
(gdb) add-inferior
[New inferior 2]
Added inferior 2
(gdb) PASS: gdb.threads/vfork-multi-inferior.exp: method=non-stop: add-inferior
inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) PASS: gdb.threads/vfork-multi-inferior.exp: method=non-stop: inferior 2
kill
The program is not being run.
(gdb) file /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/tmp/tmp.GYATAXR8Ku/gdb/testsuite/outputs/gdb.threads/vfork-multi-inferior/vfork-multi-inferior-sleep
Reading symbols from /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/tmp/tmp.GYATAXR8Ku/gdb/testsuite/outputs/gdb.threads/vfork-multi-inferior/vfork-multi-inferior-sleep...
(gdb) run &
Starting program: /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/tmp/tmp.GYATAXR8Ku/gdb/testsuite/outputs/gdb.threads/vfork-multi-inferior/vfork-multi-inferior-sleep
(gdb) PASS: gdb.threads/vfork-multi-inferior.exp: method=non-stop: run inferior 2
inferior 1
[Switching to inferior 1 [<null>] (<noexec>)]
(gdb) PASS: gdb.threads/vfork-multi-inferior.exp: method=non-stop: inferior 1
kill
The program is not being run.
(gdb) file /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/tmp/tmp.GYATAXR8Ku/gdb/testsuite/outputs/gdb.threads/vfork-multi-inferior/vfork-multi-inferior
Reading symbols from /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/tmp/tmp.GYATAXR8Ku/gdb/testsuite/outputs/gdb.threads/vfork-multi-inferior/vfork-multi-inferior...
(gdb) break should_break_here
Breakpoint 1 at 0x11b1: file /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/src/binutils-gdb/gdb/testsuite/gdb.threads/vfork-multi-inferior.c, line 25.
(gdb) PASS: gdb.threads/vfork-multi-inferior.exp: method=non-stop: break should_break_here
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
start
Temporary breakpoint 2 at 0x11c0: -qualified main. (2 locations)
Starting program: /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/tmp/tmp.GYATAXR8Ku/gdb/testsuite/outputs/gdb.threads/vfork-multi-inferior/vfork-multi-inferior
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Thread 2.1 "vfork-multi-inf" hit Temporary breakpoint 2, main () at /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/src/binutils-gdb/gdb/testsuite/gdb.threads/vfork-multi-inferior-sleep.c:23
23 sleep (30);
(gdb) FAIL: gdb.threads/vfork-multi-inferior.exp: method=non-stop: start inferior 1
What happens is:
1. We start inferior 2 with "run&", it runs very slowly, takes time to
get to main
2. We switch to inferior 1, and run "start"
3. The temporary breakpoint inserted by "start" applies to all inferiors
4. Inferior 2 hits that breakpoint and GDB reports that hit
To avoid this, breakpoints inserted by "start" should be
inferior-specific. However, we don't have a nice way to make
inferior-specific breakpoints yet. It's possible to make
pspace-specific breakpoints (for example how the internal_breakpoint
constructor does) by creating a symtab_and_line manually. However,
inferiors can share program spaces (usually on particular embedded
targets), so we could have a situation where two inferiors run the same
code in the same program space. In that case, it would just not be
possible to insert a breakpoint in one inferior but not the other.
A simple solution that should work all the time is to add a condition to
the breakpoint inserted by "start", to check the inferior reporting the
hit is the expected one. This is what this patch implements.
Add a test that does:
- start in background inferior 1 that sleeps before reaching its main
function (using a sleep in a global C++ object's constructor)
- start inferior 2 with the "start" command, which also sleeps before
reaching its main function
- validate that we hit the breakpoint in inferior 2
Without the fix, we hit the breakpoint in inferior 1 pretty much all the
time. There could be some unfortunate scheduling causing the test not
to catch the bug, for instance if the scheduler decides not to schedule
inferior 1 for a long time, but it would be really rare. If the bug is
re-introduced, the test will catch it much more often than not, so it
will be noticed.
Reviewed-By: Bruno Larsen <blarsen@redhat.com>
Approved-By: Pedro Alves <pedro@palves.net>
Change-Id: Ib0148498a476bfa634ed62353c95f163623c686a
Commit 041de3d73a changed the output format of all error messages when
GDB couldn't determine a compatible overload for a given function, but
it was only supposed to change if the failure happened due to incomplete
types. This commit removes the stray . that was added
If the download size is known, a progress bar is displayed along with
the percentage of completion and the total download size.
Downloading separate debug info for /lib/libxyz.so
[############ ] 25% (10.01 M)
If the download size is not known, a progress indicator is displayed
with a ticker ("###") that moves across the screen at a rate of 1 tick
every 0.5 seconds.
Downloading separate debug info for /lib/libxyz.so
[ ### ]
If the output stream is not a tty, batch mode is enabled, the screen is
too narrow or width has been set to 'unlimited', then only a static
description of the download is printed. No bar or ticker is displayed.
Downloading separate debug info for /lib/libxyz.so...
In any case, if the size of the download is known at the time the
description is printed then it will be included in the description.
Downloading 10.01 MB separate debug info for /lib/libxyz.so...
I noticed this problem while preparing the initial submission for the
ROCm GDB port. One particularity of this patch set is that it does not
support unwinding frames, that requires support of some DWARF extensions
that will come later. It was still possible to run to a breakpoint and
print frame #0, though.
When rebasing on top of the frame_info_ptr work, GDB started tripping on
a prepare_reinflate call, making it not possible anymore to event print
the frame when stopping on a breakpoint. One thing to know about frame
0 is that its id is lazily computed when something requests it through
get_frame_id. See:
23912acd40/gdb/frame.c (L2070-2080)
So, up to that prepare_reinflate call, frame 0's id was not computed,
and prepare_reinflate, calling get_frame_id, forces it to be computed.
Computing the frame id generally requires unwinding the previous frame,
which with my ROCm GDB patch fails. An exception is thrown and the
printing of the frame is simply abandonned.
Regardless of this ROCm GDB problem (which is admittedly temporary, it
will be possible to unwind with subsequent patches), we want to avoid
prepare_reinflate to force the computing of the frame id, for the same
reasons we lazily compute it in the first place.
In addition, frame 0's id is subject to change across a frame cache
reset. This is why save_selected_frame and restore_selected_frame have
special handling for frame 0:
23912acd40/gdb/frame.c (L1841-1863)
For this last reason, we also need to handle frame 0 specially in
prepare_reinflate / reinflate. Because the frame id of frame 0 can
change across a frame cache reset, we must not rely on the frame id from
that frame to reinflate it. We should instead just re-fetch the current
frame at that point.
This patch adds a frame_info_ptr::m_cached_level field, set in
frame_info_ptr::prepare_reinflate, so we can tell if a frame is frame 0.
There are cases where a frame_info_ptr object wraps a sentinel frame,
for which frame_relative_level returns -1, so I have chosen the value -2
to represent "invalid frame level", for when the frame_info_ptr object
is empty.
In frame_info_ptr::prepare_reinflate, only cache the frame id if the
frame level is not 0. It's fine to cache the frame id for the sentinel
frame, it will be properly handled by frame_find_by_id later.
In frame_info_ptr::reinflate, if the frame level is 0, call
get_current_frame to get the target's current frame. Otherwise, use
frame_find_by_id just as before.
This patch should not have user-visible changes with upstream GDB. But
it will avoid forcing the computation of frame 0's when calling
prepare_reinflate. And, well, it fixes the upcoming ROCm GDB patch
series.
Change-Id: I176ed7ee9317ddbb190acee8366e087e08e4d266
Reviewed-By: Bruno Larsen <blarsen@redhat.com>
print_frame_info calls frame_info_ptr::reinflate, but not
frame_info_ptr::prepare_reinflate, add the call to prepare_reinflate.
It works right now, because all callers of print_frame_info that could
possibly lead to the pretty printers being called, and the frame_info
objects being invalidated, do call prepare_reinflate themselves. And
since the cached frame id is copied when passing a frame_info_ptr by
value, print_frame_info does have a cached frame id on entry. So
technically, this change isn't needed. But I don't think it's good for
a function to rely on its callers to have called prepare_reinflate, if
it intends to call reinflate.
Change-Id: Ie332b2d5479aef46f83fdc1120c7c83f4e84d1b0
Reviewed-By: Bruno Larsen <blarsen@redhat.com>
The assertion
gdb_assert (m_cached_id != null_frame_id);
is always true, as comparing equal to null_frame_id is always false
(it's the first case in frame_id::operator==, not sure why it's not this
way, but that's what it is).
Replace the comparison with a call to frame_id_p.
Approved-By: Tom Tromey <tom@tromey.com>
Change-Id: I93986e6a85ac56353690792552e5b3b4cedec7fb
With the following patch applied (gdb: use frame_id_p instead of
comparing to null_frame_id in frame_info_ptr::reinflate), I would get:
$ ./gdb -q -nx --data-directory=data-directory testsuite/outputs/gdb.base/bt-selected-frame/bt-selected-frame -ex "b breakpt" -ex r -ex "bt full"
Reading symbols from testsuite/outputs/gdb.base/bt-selected-frame/bt-selected-frame...
Breakpoint 1 at 0x1131: file /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.base/bt-selected-frame.c, line 22.
Starting program: /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/bt-selected-frame/bt-selected-frame
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Breakpoint 1, breakpt () at /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.base/bt-selected-frame.c:22
22 }
#0 breakpt () at /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.base/bt-selected-frame.c:22
No locals.
/home/smarchi/src/binutils-gdb/gdb/frame-info.c:42: internal-error: reinflate: Assertion `frame_id_p (m_cached_id)' failed.
This is because the code in backtrace_command_1 to manually reinflate
`fi` steps overs frame_info_ptr's toes.
When calling
fi.prepare_reinflate ();
`fi` gets properly filled with the cached frame id. But when this
happens:
fi = frame_find_by_id (frame_id);
`fi` gets replaced by a brand new frame_info_ptr that doesn't have a
cached frame id. Then this is called without a cached frame id:
fi.reinflate ();
That doesn't cause any problem currently, since
- the gdb_assert in the reinflate method doesn't actually do anything
(the following patch fixes that)
- `fi.m_ptr` will always be non-nullptr, since we just got it from
frame_find_by_id, so reinflate will not do anything, it won't try to
use m_cached_id
Fix that by removing the code to manually re-fetch the frame. That
should be taken care of by frame_info_ptr::reinflate.
Note that the old code checked if we successfully re-inflated the frame
or not, and if not it did emit a warning. The equivalent in
frame_info_ptr::reinflate asserts that the frame has been successfully
re-inflated. It's not clear if / when this can happen, but if it can
happen, we'll need to find a solution to this problem globally
(everywhere a frame_info_ptr can be re-inflated), not just here. So I
propose to leave it like this, until it does become a problem.
Reviewed-By: Bruno Larsen <blarsen@redhat.com>
Change-Id: I07b783d94e2853e0a2d058fe7deaf04eddf24835
I don't see any particular reason why the implementations of the
frame_info_ptr object are in the header file. It only seems to add some
complexity. Since we can't include frame.h in frame-info.h, we have to
add declarations of functions defined in frame.c, in frame-info.h. By
moving the implementations to a new frame-info.c, we can avoid that.
Change-Id: I435c828f81b8a3392c43ef018af31effddf6be9c
Reviewed-By: Bruno Larsen <blarsen@redhat.com>
Reviewed-By: Tom Tromey <tom@tromey.com>
I noticed this crash:
$ ./gdb --data-directory=data-directory -nx -q \
testsuite/outputs/gdb.python/pretty-print-call-by-hand/pretty-print-call-by-hand \
-x testsuite/outputs/gdb.python/pretty-print-call-by-hand/pretty-print-call-by-hand.py \
-ex "b g" -ex r
(gdb) info frame
Stack level 0, frame at 0x7fffffffdd80:
rip = 0x555555555160 in g
(/home/simark/src/binutils-gdb/gdb/testsuite/gdb.python/pretty-print-call-by-hand.c:41); saved rip = 0x5555555551a3
called by frame at 0x7fffffffdda0
source language c.
Arglist at 0x7fffffffdd70, args: mt=mytype is 0x555555556004 "hello world",
depth=10
Fatal signal: Segmentation fault
This is another case of frame_info being invalidated under a function's
feet. The stack trace when the frame_info get invalidated looks like:
... many frames to pretty print the arg, that eventually invalidate the frame_infos ...
#35 0x00005568d0a8ab24 in print_frame_arg (fp_opts=..., arg=0x7ffc3216bcb0) at /home/simark/src/binutils-gdb/gdb/stack.c:489
#36 0x00005568d0a8cc75 in print_frame_args (fp_opts=..., func=0x621000233210, frame=..., num=-1, stream=0x60b000000300)
at /home/simark/src/binutils-gdb/gdb/stack.c:898
#37 0x00005568d0a9536d in info_frame_command_core (fi=..., selected_frame_p=true) at /home/simark/src/binutils-gdb/gdb/stack.c:1682
print_frame_args knows that print_frame_arg can invalidate frame_info
objects, and therefore calls prepare_reinflate/reinflate. However,
info_frame_command_core has a separate frame_info_ptr instance (it is
passed by value / copy). So info_frame_command_core needs to know that
print_frame_args can invalidate frame_info objects, and therefore needs
to prepare_reinflate/reinflate as well. Add those calls, and enhance
the gdb.python/pretty-print-call-by-hand.exp test to test that command.
Reviewed-By: Bruno Larsen <blarsen@redhat.com>
Change-Id: I9edaae06d62e97ffdb30938d364437737238a960
We do it in the move assignment operator, so I think it makes sense to
do it here too for consistency. I don't think it's absolutely necessary
to clear the other object's fields (in other words, copy constructor and
move constructor could be the same), as there is no exclusive resource
being transfered. The important thing is to leave the moved-from object
in an unknown, but valid state. But still, I think that clearing the
fields of the moved-from object is not a bad idea, it helps ensure we
don't rely on the moved-from object after.
Change-Id: Iee900ff9d25dad51d62765d694f2e01524351340
Reviewed-By: Bruno Larsen <blarsen@redhat.com>
When resolving overloaded functions, GDB relies on knowing relationships
between types, i.e. if a type inherits from another. However, some
compilers may not add complete information for given types as a way to
reduce unnecessary debug information. In these cases, GDB would just say
that it couldn't resolve the method or function, with no extra
information.
The problem is that sometimes the user may not know that the type
information is incomplete, and may just assume that there is a bug in
GDB. To improve the user experience, we attempt to detect if the
overload match failed because of an incomplete type, and warn the user
of this.
This commit also adds a testcase confirming that the message is only
triggered in the correct scenario. This test was not developed as an
expansion of gdb.cp/overload.cc because it needed the dwarf assembler,
and porting all of overload.cc seemed unnecessary.
Approved-By: Tom Tromey <tom@tromey.com>
When calling get_func_info inside a test case, it would cause failures
if the function was printed using a C++ style mangled name. The current
patch fixes this by allowing for mangled names along with the current
rules.
Approved-By: Tom Tromey <tom@tromey.com>
The idea here is the stop tools from allocating up to 32G per section
for the arelent pointer array, only to find a little later that the
section reloc count was fuzzed. This usually doesn't hurt much (on
systems that allow malloc overcommit) except when compiled with asan.
We already do this for ELF targets, and while fixing the logic
recently I decided other targets ought to do the same.
* elf64-sparc.c (elf64_sparc_get_reloc_upper_bound): Sanity check
section reloc count against file size.
* mach-o.c (bfd_mach_o_get_reloc_upper_bound): Likewise.
* aoutx.h (get_reloc_upper_bound): Likewise, and don't duplicate
check done in bfd_get_reloc_upper_bound.
* pdp11.c (get_reloc_upper_bound): Likewise.
* coffgen.c (coff_get_reloc_upper_bound): Likewise.
The test case introduced in bafcc33526 (Fix stepping in rtld without
debug symbol) fails on some systems as reported by PR/29768. This can
be seen if the system does not have debug info for the libc:
(gdb) step^M
Single stepping until exit from function main,^M
which has no line number information.^M
hello world[Inferior 1 (process 48203) exited normally]^M
(gdb) PASS: gdb.base/rtld-step-nodebugsym.exp: step
continue^M
The program is not being run.^M
(gdb) FAIL: gdb.base/rtld-step-nodebugsym.exp: continue until exit (the program is no longer running)
Without glibc debug info, GDB steps until the program finishes, and
then "gdb_continue_to_end" fails.
As this test was designed to check that GDB does not crash in the "step"
command, the continue does not carry real meaning to the test.
Replace it by "print 0" so we still check that after the step command
GDB is still alive, which is what we care about.
Tested on Ubuntu-22.04 x86_64, with and without libc6-dbg.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29768
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Nothing passes this to dgen, and even if it did, nothing would happen
because the generated spreg.[ch] files don't include any references
back to the original data table. So drop it to simplify.
Since we know we'll return 0 by default, we don't have to output case
statements for readonly or length fields whose values are also zero.
This is the most common case by far and thus generates a much smaller
switch table in the end.
Instead of writing:
case 1:
return 1;
case 2:
return 1;
...etc...
Output a single return so we get:
case 1:
case 2:
case ...
return 1;
This saves ~100 lines of code. Hopefully the compiler was already
smart enough to optimize to the same code, but if not, this probably
helps there too :).
This saves a single line for the same result. By itself, it's not
interesting, but we can further optimize the generated output and
completely omit the switch table in some cases. Which we'll do in
follow up commits.
PR tdep/28796
As reported, we are using some memory read routines that don't handle read
errors gracefully. Convert those to use the safe_* versions if available.
This allows the code to handle those read errors in a more sensible way.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28796
Commit be6276e0ae "Allow debugging of runtime loader / dynamic linker"
introduced a small regression when stepping into the runtime loader /
dynamic linker from function we do not have debug information for. This
is reported in PR/29747.
This can be shown by the following example (given by Simon Marchi in
buzilla bug report):
$ cat test.c
#include <stdio.h>
int main()
{
printf("Hi\n");
return 0;
}
$ gcc test.c -O0 -o test
$ ./gdb -q -nx --data-directory=data-directory test -ex start -ex s
Reading symbols from test...
(No debugging symbols found in test)
Temporary breakpoint 1 at 0x1151
Starting program: .../binutils-gdb/gdb/test
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Temporary breakpoint 1, 0x0000555555555151 in main ()
Single stepping until exit from function main,
which has no line number information.
/home/smarchi/src/binutils-gdb/gdb/infrun.c:6960:64: runtime error: member call on null pointer of type 'struct symbol'
The crash happens here:
#0 __sanitizer::Die () at ../../../../src/libsanitizer/sanitizer_common/sanitizer_termination.cpp:50
#1 0x00007ffff5dd7128 in __ubsan::__ubsan_handle_type_mismatch_v1_abort (Data=<optimized out>, Pointer=<optimized out>) at ../../../../src/libsanitizer/ubsan/ubsan_handlers.cpp:148
#2 0x000055556183e1a7 in process_event_stop_test (ecs=0x7fffffffccd0) at .../binutils-gdb/gdb/infrun.c:6960
#3 0x0000555561838ea4 in handle_signal_stop (ecs=0x7fffffffccd0) at .../binutils-gdb/gdb/infrun.c:6615
#4 0x000055556182f77b in handle_inferior_event (ecs=0x7fffffffccd0) at .../binutils-gdb/gdb/infrun.c:5866
When evaluating:
6956 if (execution_direction != EXEC_REVERSE
6957 && ecs->event_thread->control.step_over_calls == STEP_OVER_UNDEBUGGABLE
6958 && in_solib_dynsym_resolve_code (ecs->event_thread->stop_pc ())
6959 && !in_solib_dynsym_resolve_code (
6961 ecs->event_thread->control.step_start_function->value_block ()
6962 ->entry_pc ()))
we dereference, ecs->event_thread->control.step_start_function which is
nullptr.
This patch changes this condition so it evaluates to true if
ecs->event_thread->control.step_start_function is nullptr since this
matches the behaviour before be6276e0ae.
Tested on ubuntu-22.04 x86_64.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29747
Reviewed-By: Bruno Larsen <blarsen@redhat.com>
Approved-By: Kevin Buettner <kevinb@redhat.com>
When merging ppc configure checks into the top-level, these 2 funcs
were accidentally dropped (probably due to incorrect resolution of
conflicts). Restore them since the ppc code utilizes them both.
This controls only one thing: how to call mkdir(). The gnulib code
already has a mkdir module that provides this exact logic for us, so
punt the code entirely.
Gdbserver unconditionally reports support for btrace packets. Do not
report the support, if the underlying target does not say it supports
it. Otherwise GDB would query the server with btrace-related packets
unnecessarily.
PR exp/28359 points out that 'ptype/o' does not work when the current
language is "asm".
I tracked this down to a hard-coded list of languages in typeprint.c.
This patch replaces this list with a method on 'language_defn'
instead. If all languages are ever updated to have this feature, the
method could be removed; but in the meantime this lets each language
control what happens.
I looked at having each print_type method simply modify the flags
itself, but this doesn't work very well with the feature that disables
method-printing by default (but allows it via a flag).
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28359
Approved-By: Andrew Burgess <aburgess@redhat.com>
Approved-By: Keith Seitz <keiths@redhat.com>
