match stubs and protocol spec.
* gdbserver/remote-utils.c (remote_open): Cast to struct sockaddr
when passing to function which expects that.
The following changes aren't quite enough to make things work with
LynxOS (apprently kernel problems).
* infrun.c (wait_for_inferior): When resuming new thread, pass pid
not -1 for remote case.
* thread.c (info_threads_command): Give error if !target_has_stack.
* infrun.c (start_remote): Call init_thread_list.
* thread.c (info_threads_command): Don't call kill for remote
debugging target.
* target.c (normal_pid_to_str): Print "thread" not "process" for
remote.
* remote.c, gdbserver/*: Add 'H', 'S', and 'C' requests, 'X'
response, and `thread' part of 'T' response.
* gdbserver/*: If program exits, send packet to GDB before
exiting. Handle termination with a signal the same as exiting
with an exitstatus.
* remote.c: Don't try to kill program after getting an 'X'
response.
* infrun.c (wait_for_inferior): Add comment about kill versus mourn.
target_wait_hook to allow GUI to handle blocking for inferior. Call
call_command_hook in execute_command to provide means for wrapping
commands with GUI state change updates.
* gdbtk.c (gdb_cmd): Force GUI into idle mode when errors occur.
* (gdb_stop): New tcl command to stop the target process.
* (x_event, gdbtk_wait): Allow GUI to interrupt gdb out of target
waits.
* (gdbtk_call_command): Wrapper around command processing to
alert GUI of target state changes.
* (gdbtk_init): Get the fd of X server for doing async
notification of X events (via x_event). Setup new hooks.
* gdbtk.tcl: Add scrollbars to assembly and command windows.
* Change window foreground & background colors.
* Create margin tag for breakpoints in source and assembly windows.
* Add new routines to be invoked when target state changes to/from
idle.
* Add start of expression window.
* Change bindings of mouse button 1 in assembly and source window
to just set or clear breakpoints when in the margin tag.
* Change shape of register window to be more vertical to better
reflect it's contents.
* Add stop button.
* Cleanup some code around command window bindings.
* infrun.c (wait_for_inferior): Make sure
through_sigtramp_breakpoint is non-null before deleting.
names mean end of .o file.
* infrun.c (wait_for_inferior): Clean up multi-thread logic near
top of routine. Handle new thread notification cleanly.
* lynx-nat.c (child_wait): General cleanups, handle new LynxOS
thread notification scheme.
* (child_resume): General cleanups, handle resumption of all
threads properly.
Hardware watchpoints for Linux, from Rick Sladkey
(jrs@world.std.com).
* infrun.c (wait_for_inferior) [HAVE_CONTINUABLE_WATCHPOINT]: Add
new hardware breakpoint recovery method.
* i386v-nat.c (i386_insert_watchpoint,
i386_insert_nonaligned_watchpoint, i386_remove_watchpoint,
i386_stopped_by_watchpoint) [TARGET_CAN_USE_HARWARE_WATCHPOINT]:
New functions to support the 386 hardware debugging registers.
* config/i386/nm-linux.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT,
HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT,
target_insert_watchpoint, target_remove_watchpoint): Define these
macros to use the hardware debugging functions in i386v-nat.c.
bp_watchpoint_scope breakpoints.
(struct breakpoint): Add val_chain and related_breakpoint fields
for use by watchpoints.
* breakpoint.c (within_scope): Delete. No longer used.
(TARGET_CAN_USE_HARDWARE_WATCHPOINT): Provide default definition.
(target_{remove,insert}_watchpoint): Likewise.
(can_use_hardware_watchpoint): New function.
(remove_breakpoint): New function to remove a single breakpoint
or hardware watchpoint.
(insert_breakpoints): Handle insertion of hardware watchpoints.
Store a copy of the value chain derived from the watchpoint
expression.
(remove_breakpoints): Simplify by using remove_breakpoint.
(delete_breakpoint): Likewise.
(watchpoint_check): Delete the watchpoint and watchpoint scope
breakpoints when the watchpoint goes out of scope. Save & restore
the current frame after checking watchpoints.
(breakpoint_init_inferior): Likewise (restarting the program
makes all local watchpoints go out of scope).
(bpstat_stop_status): Handle hardware watchpoints much like normal
watchpoints. Delete the watchpoint and watchpoint scope breakpoint
when the watchpoint goes out of scope. Remove and reinsert all
breakpoints before returning if we stopped when a hardware watchpoint
fired.
(watch_command): Use a hardware watchpoint when possible. If
watching a local expression, build a scope breakpoint too.
(map_breakpoint_numbers): Also call given function for any
related breakpoints.
(disable_breakpoint): Never disable a scope breakpoint.
(enable_breakpoint): Handle hardware breakpoints much like normal
breakpoints, but recompute the watchpoint_scope breakpoint's
frame and address (if we have an associated scope breakpoint).
(read_memory_nobpt): Handle hardware watchpoints like normal
watchpoints. When necessary handle watchpoint_scope breakpoints.
(print_it_normal, bpstat_what, breakpoint_1, mention): Likewise.
(clear_command, breakpoint_re_set_one, enable_command): Likewise.
(disable_command): Likewise.
* blockframe.c (find_frame_addr_in_frame_chain): New function.
Extern prototype added to frame.h
* infrun.c (wait_for_inferior): Set current_frame and select
a frame before checking if we stopped due to a hardare watchpoint
firing. Handle stepping over hardware watchpoints.
(normal_stop): Remove unnecessary call to select_frame.
* value.h (value_release_to_mark): Declare.
* values.c (value_release_to_mark): New function.
* procfs.c (procfs_wait): Add cases for hardware watchpoints.
(procfs_set_watchpoint, procfs_stopped_by_watchpoint): New functions.
* hppab-nat.c (hppa_set_watchpoint): New function.
* config/pa/nm-hppab.h (STOPPED_BY_WATCHPOINT): Define.
(HAVE_STEPPABLE_WATCHPOINT): Define.
(TARGET_CAN_USE_HARDWARE_WATCHPOINT): Define.
(target_{insert,delete}_watchpoint): Define.
are in the .plt section.
* minsyms.c (lookup_solib_trampoline_symbol_by_pc,
find_solib_trampoline_target): New functions for handling
stepping into -g compiled shared libraries.
* symtab.h (lookup_solib_trampoline_symbol_by_pc,
find_solib_trampoline_target): Add prototypes.
* config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE):
Define to handle stepping into -g compiled shared libraries.
* config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE): Define to handle
stepping into -g compiled shared libraries.
* configure.in: Add mips-*-sysv4* support.
* config/mips/mipsv4.mh, config/mips/mipsv4.mt,
config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c:
New files for MIPS SVR4 support.
* Makefile.in: Update for new mipsv4 files.
* alpha-tdep.c (heuristic_proc_desc, find_proc_desc): Use
read_next_frame_reg to obtain the frame relative stack pointer.
* mips-tdep.c (heuristic_proc_desc): Use read_next_frame_reg to
obtain the frame relative stack pointer.
* mdebugread.c (parse_partial_symbols, psymtab_to_symtab1):
Handle stStatic and stStaticProc symbols in stabs-in-ecoff output
by entering them into the minimal symbol table.
* printcmd.c (print_scalar_formatted): Do not try to unpack to
a long for float formats.
* solib.c: Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not
get defined in <link.h>.
* solib.c (solib_add): Add shared library sections to the section
table of the target before adding the symbols.
* partial-stab.h: Relocate static and global functions.
* dbxread.c (read_dbx_symtab): Remove unused variable
end_of_text_address. Relocate text_addr when passing it
to end_psymtab.
For Alpha OSF/1 targets, enable gdb to set breakpoints in shared
library functions before the executable is run. Retrieve dynamic
symbols from stripped executables.
* mipsread.c (read_alphacoff_dynamic_symtab): New function.
* mipsread.c (mipscoff_symfile_read): Use it. Issue warning message
if no debugging symbols were found.
* alpha-tdep.c (alpha_skip_prologue): Silently return the unaltered
pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS
is defined.
* config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS): Define,
OSF/1 has shared libraries.
(bpstat_what_main_action): New code BPSTAT_WHAT_THROUGH_SIGTRAMP.
* breakpoint.c (bpstat_what): Return BPSTAT_WHAT_THROUGH_SIGTRAMP
if we hit a bp_through_sigtramp breakpoint. Remove kludge which
ignored bs->stop for a bp_step_resume breakpoint.
* infrun.c (wait_for_inferior): Make a through_sigtramp_breakpoint
which performs one (the check_sigtramp2 one) of the functions
which had been handled by the step_resume_breakpoint. For each
use of the step_resume_breakpoint, make it still use the
step_resume_breakpoint, use the through_sigtramp_breakpoint, or
operate on both.
Deal with BPSTAT_WHAT_THROUGH_SIGTRAMP return from bpstat_what.
When setting the frame address of the step resume breakpoint, set
it to the address for frame *before* the call instruction is
executed, not after.
in case execution was stopped in the called function.
* stack.c (print_frame_info, frame_info): If backtracing through
a call dummy, handle the starting source line number on a line
boundary like backtracing through sigtramp.
* sparc-tdep.c (sparc_frame_find_saved_regs): Get frame address
for call dummy frame right. Remove old test for dummy frame,
it has been unused at least since gdb-3.5.
* sparc-tdep.c (sparc_push_dummy_frame): Set return address register
of the dummy frame.
* target.c (store_waitstatus): Add CHILD_SPECIAL_WAITSTATUS hook.
* infrun.c (wait_for_inferior): Replace SIGTRAP_STOP_AFTER_LOAD with
code which looks for those two waitkinds. Use switch statement.
* config/rs6000/tm-rs6000.h: Replace SIGTRAP_STOP_AFTER_LOAD with
CHILD_SPECIAL_WAITSTATUS.
struct target_waitstatus. Change status argument to target_wait to
be struct target_waitstatus * instead of int *.
* target.h, infrun.c, all targets: Change type of signal arguments
to resume(), proceed(), and target_resume() from int to enum
target_signal.
* All targets (*_wait, *_resume): Change accordingly.
* infcmd.c (program_info, signal_command), throughout infrun.c,
* fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
* convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
signal code stuff right with the new signals would be non-trivial).
* inferior.h (stop_signal): Make it enum target_signal not int.
* target.c, target.h (target_signal_to_string, target_signal_to_name,
target_signal_from_name): New functions.
* inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
store_waitstatus): New functions.
* procfs.c (procfs_notice_signals): Use them.
* i960-tdep.c (i960_fault_to_signal): New function, to replace
print_fault.
* config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
* infrun.c (wait_for_inferior): Remove confusing and inaccurate
stuff about subroutine calls, return, etc., from comment which
says "We've wandered out of the step range.".
Sun Dec 26 09:18:10 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* infrun.c (wait_for_inferior): When checking whether the line has
changed, check the symtab as well.
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
the top of the file, making them more concise and moving them with
the code (Sorry, Randy, but these stream-of-consciousness comments
really have to go). Switch the order of the "&&", which makes
things clearer and turns out to be an improvement with respect to
side effects and speed.
New functions.
* infrun.c (normal_stop): Don't try and set the pc in the current
frame coredump if there isn't one.
* remote-sim.c (gdbsim_store_register): Don't
SWAP_TARGET_AND_HOST, sim_store_register takes bytes in raw order.
(gdbsim_wait): Set status with WSETSTOP.
* config/h8300/tm-h8300.h (sr_get_debug): Define
PSYMTAB_TO_SYMTAB, call target_terminal_ours_for_output first.
This is needed now that wait_for_inferior passes in endaddr.
* infrun.c: Move call to target_terminal_inferior from proceed
to resume.
beyond the end of the last function in an objfile.
* coff-solib.c (coff_solib_add): Use BFD to get fields from .lib
section.
* infrun.c (wait_for_inferior): Modify test for subroutine entry
to include pc out of bounds of the previous function.
* remote.c (remote_wait): Use strtoul for parsing 'N' message.
Add code to relocate symfile_objfile->sections.
that clears the `inserted' flag for all breakpoints and deletes
any breakpoints which should go away between runs of programs.
* inflow.c (generic_mourn_inferior), infrun.c (init_wait_for_inferior),
remote-es.c (es1800_load), comments in exec.c and corelow.c:
Use it instead of mark_breakpoints_out.
* breakpoint.c (mark_breakpoints_out): Update comment, tm-rs6000.h
uses it in a completely different context.
* breakpoint.c (breakpoint_re_set_one): Add bp_call_dummy case.
* alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt,
config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c:
New files.
* Makefile.in: Add new files and dependencies.
* configure.in: Add alpha target.
* config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o
* config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle
shared libraries now.
* config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right.
* defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE,
provide `unsigned int' default.
* breakpoint.c (breakpoint_auto_delete): Delete only if we really
stopped for the breakpoint.
* stabsread.c, stabsread.h (define_symbol): Change valu parameter
to a CORE_ADDR.
* stabsread.c (read_range_type): Handle the case where the lower
bound overflows and the upper doesn't and the range is legal.
* infrun.c (resume): Do not step a breakpoint instruction if
CANNOT_STEP_BREAKPOINT is defined.
* inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT.
Now that we have the bp_call_dummy breakpoint the call dummy code
is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and
FIX_CALL_DUMMY can be used to set up everything for the dummy.
The breakpoint for the dummy is set at the entry point and thats it.
* blockframe.c (inside_entry_file, inside_entry_func): Do not stop
backtraces if pc is in the call dummy at the entry point.
* infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use
the expected breakpoint pc when setting up the frame for
set_momentary_breakpoint.
* symfile.c (entry_point_address): New function for AT_ENTRY_POINT
support.
* valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
Some of the following is in #ifdef CALL_DUMMY_BREAKPOINT_OFFSET.
* breakpoint.h (enum bptype): Add bp_call_dummy.
(struct bpstat_what): Add call_dummy field.
* infrun.c (wait_for_inferior): Deal with it.
* breakpoint.c (bpstat_what): Deal with call dummy breakpoint.
* infcmd.c (run_stack_dummy): Set the call dummy breakpoint.
* config/sparc/tm-sparc.h: Define CALL_DUMMY_BREAKPOINT_OFFSET.
step_resume_break_address with step_resume_breakpoint (now local
to wait_for_inferior).
({insert,remove}_step_breakpoint): Remove.
(wait_for_inferior): Set step resume break with
set_momentary_breakpoint. Test hitting it with bpstat_stop_status
and bpstat_what (stop_step_resume_break removed).
* breakpoint.{h,c}, infrun.c: Return value from bpstat_what now struct
which includes previous return value as main_action, and a step_resume
bit.
* breakpoint.c (delete_breakpoint): If breakpoint was inserted, and
there is another breakpoint there, insert it.
* infrun.c (wait_for_inferior): Rearrange the spaghetti a bit. Use
a few more gotos.
Various: Clean up and add comments.
step_resume_break_address with step_resume_breakpoint (now local
to wait_for_inferior).
({insert,remove}_step_breakpoint): Remove.
(wait_for_inferior): Set step resume break with
set_momentary_breakpoint. Test hitting it with bpstat_stop_status
and bpstat_what (stop_step_resume_break removed).
* breakpoint.{h,c}, infrun.c: Return value from bpstat_what now struct
which includes previous return value as main_action, and a step_resume
bit.
* breakpoint.c (delete_breakpoint): If breakpoint was inserted, and
there is another breakpoint there, insert it.
* infrun.c (wait_for_inferior): Rearrange the spaghetti a bit. Use
a few more gotos.
Various: Clean up and add comments.
branch targets to compute target address using const from previous
instruction if necessary.
* Add `Q' operator to print out bit position field various
instructions.
* hppah-nat.c: #include sys/param.h, and sys/user.h. General
cleanups, use new code from Utah.
* (store_inferior_registers): Update to new code from Utah.
* (initialize_kernel_u_addr): Re-enable decl of struct user u.
* (fetch_register): Clear out priv level when reading PCs.
* hppah-tdep.c: Get rid of gobs of KERNELDEBUG stuff.
* Remove decl of errno, #include wait.h and target.h.
* (frame_saved_pc): Check `flags' pseudo-register to see if we
were inside of a kernel call. If so, then PC is in a different
register. Also, mask out bottom two bits of all PCs so as not to
confuse higher level code.
* (push_dummy_frame): Create from #define in tm-hppa.h.
* (find_dummy_frame_regs): Update from Utah.
* (hp_pop_frame): Create from #define in tm-hppa.h.
* (hp_restore_pc_queue): New, from Utah.
* (hp_push_arguments): Big fixes from Utah.
* (pa_do_registers_info, pa_print_registers): Only print out fp
regs upon request.
* (skip_trampoline_code): New routine to deal with stubs that
live in nowhereland between callers and callees.
* i860-tdep.c: Remove decl of attach_flag.
* infrun.c (wait_for_inferior): Add new macro
INSTRUCTION_NULLIFIED, which can tell if the instruction pointed
at by PC will be nullified. If so, then step the target once more
so as to avoid confusing the user.
* (just before step_over_function:): Use stop_func_start, not
stop_pc when checking for the existance of line number info.
stop_func_start will reflect the proper address of the target
routine, not of the stub that we may be traversing to get there.
* tm-hppa.h: define SKIP_TRAMPOLINE_CODE and IN_SOLIB_TRAMPOLINE
to deal with the stubs that PA compilers sometimes stick between
callers and callees. Also, define FLAGS_REGNUM for access to the
`flags' pseudo-reg.
* (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Use
memcpy, not bcopy.
* (CANNOT_STORE_REGISTER): New from Utah. Says that we can't
write gr0, PC regs, and PSW!
* (FRAME_FIND_SAVED_REGS): Bug fixes from Utah.
* (PUSH_DUMMY_FRAME, POP_FRAME): Make into real routines in
hppah-nat.c.
* (CALL_DUMMY, FIX_CALL_DUMMY): Fixes from Utah.
* Define struct unwind_table_entry.
* valops.c (call_function_by_hand): Add another arg to
FIX_CALL_DUMMY (under #ifdef GDB_TARGET_IS_HPPA). Why is this
necessary?
* Makefile.in (SFILES_MAINDIR): Add typeprint.c, c-typeprint.c,
m2-typeprint.c, c-valprint.c cp-valprint.c m2-valprint.c.
* Makefile.in (HFILES): Add valprint.h.
* Makefile.in (OBS): Add typeprint.o, c-typeprint.o,
m2-typeprint.o, c-valprint.o, cp-valprint.o m2-valprint.o.
* typeprint.c, typeprint.h: New files for language independent
type printing functions.
* c-typeprint.c, m2-typeprint.c: New files for language dependent
type printing functions and definitions.
* valprint.h: New include file for language independent value
printing definitions.
* c-valprint.c, cp-valprint.c, m2-valprint.c: New files for language
dependent value printing functions.
* c-exp.y (production ptype): Add range_type variable and use new
create_range_type function.
* c-exp.y (tokentab2, tokentab3), c-lang.c (c_op_print_tab),
infcmd.c (path_var_name), language.c (unk_op_print_tab),
m2-lang.c (m2_op_print_tab): Change from ANSI-obsolescent
"const static" to ANSI-conformant "static const".
* c-exp.y (c_create_fundamental_type): Remove unused nbytes.
* c-exp.y (c_language_defn, cplus_language_defn): Add c_print_type,
and c_val_print.
* c-lang.h (c_print_type, c_val_print): Add prototypes.
* coffread.c (decode_type): Add range_type variable and call to
new create_range_type function.
* complaints.c (complain): Remove unused val variable.
* complaints.c (_initialize_complaints): Make it void.
* convex-tdep.c (value_of_trapped_internalvar): Add range_type
variable and call new create_range_type function.
* defs.h (enum val_prettyprint): Move enum from value.h to here
so we can avoid having to include value.h just for prototypes that
need the enum (thanks ANSI).
* dwarfread.c (struct_type): Local anonymous_size variable is
only used if !BITS_BIG_ENDIAN.
* dwarfread.c (decode_subscript_data_item): Add rangetype
variable and call new create_range_type function.
* elfread.c (elf_symfile_read): Remove unused dbx and text_sect
variables.
* eval.c (evaluate_subexp): Remove unused local variable name
and the statement with no side effects that initializes it.
* expprint.c (print_subexp): Change local_printstr to
LA_PRINT_STRING.
* gdbtypes.c (create_range_type): New function that creates
a range type using code fragments from object file readers as
an example of what has to be initialized.
* gdbtypes.c (create_array_type): Removed index_type, low_bound,
and high_bound parameters, replaced with a single range_type
parameter. Change function body to use passed in range_type
rather than handcrafting one.
* gdbtypes.h (create_range_type): Add prototype.
* gdbtypes.h (create_array_type): Change prototype parameters.
* infrun.c (normal_stop): Remove unused local variables tem and c.
* infrun.c (hook_stop_stub): Return 0 rather than random value.
* language.c (unk_lang_print_type, unk_lang_val_print): Add
stub functions that call error if called.
* language.c (unknown_language_defn, auto_language_defn,
local_language_defn): Add initializers unk_lang_print_type and
unk_lang_val_print.
* language.h (struct language_defn): Reformat for larger
comments, add la_print_type and la_val_print members. Add
LA_PRINT_TYPE and LA_VAL_PRINT macros. Change local_printchar
to LA_PRINT_CHAR and local_printstr to LA_PRINT_STRING.
* m2-lang.c (m2_create_fundamental_type): Remove unused local
variable nbytes.
* m2-lang.c (m2_language_defn): Add initializers m2_print_type
and m2_val_print.
* m2-lang.h (m2_print_type, m2_val_print): Add prototypes.
* main.c (execute_command): Remove unused local variable cmdlines.
* main.c (echo_command), stabsread.c (read_type), printcmd.c
(clear_displays), symmisc.c (block_depth), values.c
(clear_value_history):
Make testing of truth value of assignment result explicit.
* mipsread.c (upgrade_type): Update FIXME to include future use
of create_range_type.
* printcmd.c (ptype_command, ptype_eval, whatis_command,
whatis_exp, maintenance_print_type): Move prototypes and functions
to new typeprint.c.
* printcmd.c (_initialize_printcmd): Move add_com calls for
ptype_command and whatis_command to new typeprint.c.
* ser-bsd.c (serial_open): Remove unused variable sgttyb.
* source.c (find_source_lines): Local variable c only used
when LSEEK_NOT_LINEAR is defined.
* stabsread.c (read_array_type): Use new create_range_type
function.
* stabsread.c (read_range_type): Add new index_type variable and
call new create_range_type function rather than handcrafting
range types.
* symmisc.c (type_print_1): Change usages to LA_PRINT_TYPE.
* symtab.c (typedef_print usages): Use c_typedef_print, renamed.
* symtab.c (type_print_base usages): Use c_type_print_base.
* symtab.c (type_print_varspec_prefix usages): Use
c_type_print_varspec_prefix.
* symtab.c (type_print_method_args usages): Use
cp_type_print_method_args.
* valprint.c: Completely ripped apart and the fragments used
to create c-valprint.c, cp-valprint.c, m2-valprint.c, and
valprint.h. Remaining stuff is language independent.
* value.h (struct fn_field): Forward declare for prototypes.
* value.h (type_print_1): Remove prototype.
* value.h (enum val_prettyprint): Moved to defs.h.
* value.h (typedef_print): Prototype renamed to c_typedef_print.
* value.h (baseclass_offset): Add prototype.
**** start-sanitize-chill ****
* Makefile.in (SFILES_MAINDIR): Add ch-typeprint.c, ch-valprint.c.
* Makefile.in (OBS): Add ch-typeprint.o, ch-valprint.o.
* ch-typeprint.c: New file for language dependent type printing.
* ch-valprint.c: New file for language dependent value printing.
* ch-exp.y (parse_number): Remove prototype and stub function.
* ch-exp.y (decode_integer_literal): Removed unused digits and
temp variables.
* ch-exp.y (convert_float): Completely ifdef out for now.
* ch-exp.y (tokentab2, tokentab3, tokentab4, tokentab5),
ch-lang.c (chill_op_print_tab):
Change from ANSI-obsolescent "const static" to ANSI-conformant
"static const".
* ch-exp.y (yylex): Add unhandled storage class enumeration
literals to switch statement for completeness.
* ch-lang.c (chill_create_fundamental_types): Remove unused
nbytes variable. Change dummy type to 2 bytes to match int.
Handle FT_VOID types gratuituously added to chill DWARF by
compiler. Change FT_CHAR case to generate an TYPE_CODE_CHAR
type rather than a one byte TYPE_CODE_INT type.
* ch-lang.c (chill_language_defn): Add chill_print_type and
chill_val_print.
* ch-lang.h (chill_print_type, chill_val_print): Add prototypes.
**** end-sanitize-chill ****
child_mourn_inferior): collect unix child process stratum
functions which live below the target vector into this file to
facilitate host/target/native split. Also, make them static.
* inflow.c (child_mourn_inferior): removed.
* infrun.c (child_create_inferior, child_attach): removed.
(resume): becomes global so that functions below the
target vector can find it.
* inferior.h (resume): add prototype.
(child_mourn_inferior, child_create_inferior, child_attach):
remove prototypes.
symtab.h, tm-i386v4.h, valprint.c, values.c: Lint.
* breakpoint.c, c-exp.y, coffread.c, command.c, environ.c, eval.c,
findvar.c, infcmd.c, infptrace.c, infrun.c, m2-exp.y, parse.c,
putenv.c, solib.c, sparc-xdep.c, symtab.c, tm-i386v.h, tm-sparc.h,
utils.c, valarith.c, valops.c, valprint.c, values.c:
Replace bcopy() use with memcpy(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
* breakpoint.c, buildsym.c, coffread.c, dbxread.c, i386-tdep.c,
ieee-float.c, infcmd.c, sparc-tdep.c, stack.c, symtab.c, symtab.h,
target.c, values.c:
Replace bzero() use with memset(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
* i386-tdep.c, main.c, valprint.c:
Replace bcmp() use with memcmp(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
* coffread.c (coff_end_symtab): Cast 2nd arg of complain() to
correct type.
* defs.h (NORETURN): Define away for Lucid compiler.
* remote.c (remote_timer, remote_interrupt): Signal handlers
take one int arg.
* ser-termios.c (serial_write, serial_close): Return whatever
value the write/close call returns, rather than falling off end.
* inferior.h (PTRACE_ARG3_TYPE): Third arg to ptrace is int on
more systems than it is "char *". Define PTRACE_ARG3_TYPE to
default to int.
* infptrace.c, hppabsd-xdep.c, hppahpux-xdep.c, i386-xdep.c,
inferior.h (call_ptrace): Use PTRACE_ARG3_TYPE to declare type
of third arg.
* a68v-xdep.c, arm-xdep.c, convex-xdep.c, hp300ux-xdep.c, infrun.c,
m88k-xdep.c, mach386-xdep.c, mips-xdep.c, os68k-xdep.c, pyr-tdep.c,
pyr-xdep.c, rs6000-xdep.c, sparc-xdep.c, sun3-xdep.c, sun386-xdep.c,
symm-xdep.c, ultra3-xdep.c: Use PTRACE_ARG3_TYPE to cast ptrace
argument 3.
* sparc-xdep.c, a68v-xdep.c (fetch_inferior_registers,
store_inferior_registers): Supply missing fourth argument to
ptrace().
(which is not a Posix signal) if it isn't defined.
* tm-linux.h, xm-linux.h, config/linux.m[ht], configure.in:
New port to Linux (a free Unix clone for 386 machines).
