These relocations should have had REL in their names, to reflect the
fact that they are pc-relative. Fix that now by adding _PCREL.
I've added some back-compatibility code to support anyone using
.reloc with the old relocations.
include/
* elf/ppc64.h (elf_ppc64_reloc_type): Rename
R_PPC64_GOT_TLSGD34 to R_PPC64_GOT_TLSGD_PCREL34,
R_PPC64_GOT_TLSLD34 to R_PPC64_GOT_TLSLD_PCREL34,
R_PPC64_GOT_TPREL34 to R_PPC64_GOT_TPREL_PCREL34, and
R_PPC64_GOT_DTPREL34 to R_PPC64_GOT_DTPREL_PCREL34.
bfd/
* reloc.c: Rename
BFD_RELOC_PPC64_GOT_TLSGD34 to BFD_RELOC_PPC64_GOT_TLSGD_PCREL34,
BFD_RELOC_PPC64_GOT_TLSLD34 to BFD_RELOC_PPC64_GOT_TLSLD_PCREL34,
BFD_RELOC_PPC64_GOT_TPREL34 to BFD_RELOC_PPC64_GOT_TPREL_PCREL34,
BFD_RELOC_PPC64_GOT_DTPREL34 to BFD_RELOC_PPC64_GOT_DTPREL_PCREL34.
* elf64-ppc.c: Update throughout for reloc renaming.
(ppc64_elf_reloc_name_lookup): Handle old reloc names.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c: Update throughout for reloc renaming.
elfcpp/
* powerpc.h: Rename
R_PPC64_GOT_TLSGD34 to R_PPC64_GOT_TLSGD_PCREL34,
R_PPC64_GOT_TLSLD34 to R_PPC64_GOT_TLSLD_PCREL34,
R_PPC64_GOT_TPREL34 to R_PPC64_GOT_TPREL_PCREL34, and
R_PPC64_GOT_DTPREL34 to R_PPC64_GOT_DTPREL_PCREL34.
gold/
* powerpc.cc: Update throughout for reloc renaming.
The CGEN support code in opcodes accesses instruction contents using a
couple of functions defined in cgen-opc.c: cgen_get_insn_value and
cgen_put_insn_value. These functions use the "instruction endianness"
in the CPU description to order the read/written bytes.
The process of writing an instruction to the object file is:
a) cgen_put_insn_value ;; Writes out the opcodes.
b) ARCH_cgen_insert_operand
insert_normal
insert_1
cgen_put_insn_value ;; Writes out the bytes of the
;; operand.
Likewise, the process of reading an instruction from the object file
is:
a) cgen_get_insn_value ;; Reads the opcodes.
b) ARCH_cgen_extract_operand
extract_normal
extract_1
cgen_get_insn_value ;; Reads in the bytes of the
;; operand.
As can be seen above, cgen_{get,put}_insn_value are used to both
process the instruction opcodes (the constant fields conforming the
base instruction) and also the values of the instruction operands,
such as immediates.
This is problematic for architectures in which the endianness of
instructions is different to the endianness of data. An example is
BPF, where instructions are always encoded big-endian but the data may
be either big or little.
This patch changes the cgen_{get,put}_insn_value functions in order to
get an extra argument with the endianness to use, and adapts the
existin callers to these functions in order to provide cd->endian or
cd->insn_endian, whatever appropriate. Callers like extract_1 and
insert_1 pass cd->endian (since they are reading/writing operand
values) while callers reading/writing the base instruction pass
cd->insn_endian instead.
A few little adjustments have been needed in some existing CGEN based
ports:
* The BPF assembler uses cgen_put_insn_value. It has been adapted to
pass the new endian argument.
* The mep port has code in mep.opc that uses cgen_{get,put}_insn_value.
It has been adapted to pass the new endianargument. Ditto for a
call in the assembler.
Tested with --enable-targets=all.
Regested in all supported targets.
No regressions.
include/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/cgen.h: Get an `endian' argument in both
cgen_get_insn_value and cgen_put_insn_value.
opcodes/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* cgen-opc.c (cgen_get_insn_value): Get an `endian' argument.
(cgen_put_insn_value): Likewise.
(cgen_lookup_insn): Pass endianness to cgen_{get,put}_insn_value.
* cgen-dis.in (print_insn): Likewise.
* cgen-ibld.in (insert_1): Likewise.
(insert_1): Likewise.
(insert_insn_normal): Likewise.
(extract_1): Likewise.
* bpf-dis.c: Regenerate.
* bpf-ibld.c: Likewise.
* bpf-ibld.c: Likewise.
* cgen-dis.in: Likewise.
* cgen-ibld.in: Likewise.
* cgen-opc.c: Likewise.
* epiphany-dis.c: Likewise.
* epiphany-ibld.c: Likewise.
* fr30-dis.c: Likewise.
* fr30-ibld.c: Likewise.
* frv-dis.c: Likewise.
* frv-ibld.c: Likewise.
* ip2k-dis.c: Likewise.
* ip2k-ibld.c: Likewise.
* iq2000-dis.c: Likewise.
* iq2000-ibld.c: Likewise.
* lm32-dis.c: Likewise.
* lm32-ibld.c: Likewise.
* m32c-dis.c: Likewise.
* m32c-ibld.c: Likewise.
* m32r-dis.c: Likewise.
* m32r-ibld.c: Likewise.
* mep-dis.c: Likewise.
* mep-ibld.c: Likewise.
* mt-dis.c: Likewise.
* mt-ibld.c: Likewise.
* or1k-dis.c: Likewise.
* or1k-ibld.c: Likewise.
* xc16x-dis.c: Likewise.
* xc16x-ibld.c: Likewise.
* xstormy16-dis.c: Likewise.
* xstormy16-ibld.c: Likewise.
gas/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* cgen.c (gas_cgen_finish_insn): Pass the endianness to
cgen_put_insn_value.
(gas_cgen_md_apply_fix): Likewise.
(gas_cgen_md_apply_fix): Likewise.
* config/tc-bpf.c (md_apply_fix): Pass data endianness to
cgen_put_insn_value.
* config/tc-mep.c (mep_check_ivc2_scheduling): Pass endianness to
cgen_put_insn_value.
cpu/ChangeLog:
2020-06-02 Jose E. Marchesi <jose.marchesi@oracle.com>
* mep.opc (print_slot_insn): Pass the insn endianness to
cgen_get_insn_value.
This patch adds support for a new CGEN_OPEN_INSN_ENDIAN argument
for @arch@_cgen_cpu_open. This is useful for architectures in
which the endianness of the instruction words is not the same
than the endianness used for data.
An accompanying patch has been sent to the CGEN mailing list that
adds support for this argument on the CGEN side [1]. Its been
already pre-approved [2], and will be applied simultaneously with
this binutils series.
[1] https://sourceware.org/pipermail/cgen/2020q2/002733.html
[2] https://sourceware.org/pipermail/cgen/2020q2/002737.html
include/ChangeLog:
2020-06-04 Jose E. Marchesi <jemarch@gnu.org>
* opcode/cgen.h (enum cgen_cpu_open_arg): New value
CGEN_CPU_OPEN_INSN_ENDIAN.
opcodes/ChangeLog:
2020-06-04 Jose E. Marchesi <jemarch@gnu.org>
* cgen-dis.in (cpu_desc_list): New field `insn_endian'.
(print_insn_): Handle instruction endian.
* bpf-dis.c: Regenerate.
* bpf-desc.c: Regenerate.
* epiphany-dis.c: Likewise.
* epiphany-desc.c: Likewise.
* fr30-dis.c: Likewise.
* fr30-desc.c: Likewise.
* frv-dis.c: Likewise.
* frv-desc.c: Likewise.
* ip2k-dis.c: Likewise.
* ip2k-desc.c: Likewise.
* iq2000-dis.c: Likewise.
* iq2000-desc.c: Likewise.
* lm32-dis.c: Likewise.
* lm32-desc.c: Likewise.
* m32c-dis.c: Likewise.
* m32c-desc.c: Likewise.
* m32r-dis.c: Likewise.
* m32r-desc.c: Likewise.
* mep-dis.c: Likewise.
* mep-desc.c: Likewise.
* mt-dis.c: Likewise.
* mt-desc.c: Likewise.
* or1k-dis.c: Likewise.
* or1k-desc.c: Likewise.
* xc16x-dis.c: Likewise.
* xc16x-desc.c: Likewise.
* xstormy16-dis.c: Likewise.
* xstormy16-desc.c: Likewise.
binutils/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* objdump.c (disassemble_data): Set disasm_info.endian_code to
disasm_info.endian after the latter is initialized to the
endianness reported by BFD.
The original report is as follow,
https://sourceware.org/pipermail/binutils/2020-June/111383.html
Inlcude the bfd.h in the include/opcode/riscv.h may cause gdbserver fail
to build. I just want to use the `bfd_boolean` in the opcodes/riscv-opc.c,
but I didn't realize this cause the build failed. Fortunately, I can also
use the `int` as the function return types just like others in the
opcodes/riscv-opc.c.
include/
* opcode/riscv.h: Remove #include "bfd.h". And change the return
types of riscv_get_isa_spec_class and riscv_get_priv_spec_class
from bfd_boolean to int.
opcodes/
* riscv-opc.c (riscv_get_isa_spec_class): Change bfd_boolean to int.
(riscv_get_priv_spec_class): Likewise.
Since this value is used in fields of type tilepro_pipeline (as
NO_PIPELINE, see tc-tilepro.c) it is appropriate to put it in
the tilepro_pipelen enum. This avoids a warning about converting from
one enum type to another.
PR 26044
* opcode/tilepro.h (TILEPRO_NUM_PIPELINE_ENCODINGS): Move to
tilepro_pipeline enum.
1. Remove the -mriscv-isa-version and --with-riscv-isa-version options.
We can still use -march to choose the version for each extensions, so there is
no need to add these.
2. Change the arguments of options from [1p9|1p9p1|...] to [1.9|1.9.1|...].
Unlike the architecture string has specified by spec, ther is no need to do
the same thing for options.
3. Spilt the patches to reduce the burdens of review.
[PATCH 3/7] RISC-V: Support new GAS options and configure options to set ISA versions
to
[PATCH v2 3/9] RISC-V: Support GAS option -misa-spec to set ISA versions
[PATCH v2 4/9] RISC-V: Support configure options to set ISA versions by default.
[PATCH 4/7] RISC-V: Support version checking for CSR according to privilege version.
to
[PATCH v2 5/9] RISC-V: Support version checking for CSR according to privilege spec version.
[PATCH v2 6/9] RISC-V: Support configure option to choose the privilege spec version.
4. Use enum class rather than string to compare the choosen ISA spec in opcodes/riscv-opc.c.
The behavior is same as comparing the choosen privilege spec.
include * opcode/riscv.h: Include "bfd.h" to support bfd_boolean.
(enum riscv_isa_spec_class): New enum class. All supported ISA spec
belong to one of the class
(struct riscv_ext_version): New structure holds version information
for the specific ISA.
* opcode/riscv-opc.h (DECLARE_CSR): There are two version information,
define_version and abort_version. The define_version means which
privilege spec is started to define the CSR, and the abort_version
means which privilege spec is started to abort the CSR. If the CSR is
valid for the newest spec, then the abort_version should be
PRIV_SPEC_CLASS_DRAFT.
(DECLARE_CSR_ALIAS): Same as DECLARE_CSR, but only for the obselete CSR.
* opcode/riscv.h (enum riscv_priv_spec_class): New enum class. Define
the current supported privilege spec versions.
(struct riscv_csr_extra): Add new fields to store more information
about the CSR. We use these information to find the suitable CSR
address when user choosing a specific privilege spec.
binutils * dwarf.c: Updated since DECLARE_CSR is changed.
opcodes * riscv-opc.c (riscv_ext_version_table): The table used to store
all information about the supported spec and the corresponding ISA
versions. Currently, only Zicsr is supported to verify the
correctness of Z sub extension settings. Others will be supported
in the future patches.
(struct isa_spec_t, isa_specs): List for all supported ISA spec
classes and the corresponding strings.
(riscv_get_isa_spec_class): New function. Get the corresponding ISA
spec class by giving a ISA spec string.
* riscv-opc.c (struct priv_spec_t): New structure.
(struct priv_spec_t priv_specs): List for all supported privilege spec
classes and the corresponding strings.
(riscv_get_priv_spec_class): New function. Get the corresponding
privilege spec class by giving a spec string.
(riscv_get_priv_spec_name): New function. Get the corresponding
privilege spec string by giving a CSR version class.
* riscv-dis.c: Updated since DECLARE_CSR is changed.
* riscv-dis.c: Add new disassembler option -Mpriv-spec to dump the CSR
according to the chosen version. Build a hash table riscv_csr_hash to
store the valid CSR for the chosen pirv verison. Dump the direct
CSR address rather than it's name if it is invalid.
(parse_riscv_dis_option_without_args): New function. Parse the options
without arguments.
(parse_riscv_dis_option): Call parse_riscv_dis_option_without_args to
parse the options without arguments first, and then handle the options
with arguments. Add the new option -Mpriv-spec, which has argument.
* riscv-dis.c (print_riscv_disassembler_options): Add description
about the new OBJDUMP option.
ld * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated
priv attributes according to the -mpriv-spec option.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-b.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise.
bfd * elfxx-riscv.h (riscv_parse_subset_t): Add new callback function
get_default_version. It is used to find the default version for
the specific extension.
* elfxx-riscv.c (riscv_parsing_subset_version): Remove the parameters
default_major_version and default_minor_version. Add new bfd_boolean
parameter *use_default_version. Set it to TRUE if we need to call
the callback rps->get_default_version to find the default version.
(riscv_parse_std_ext): Call rps->get_default_version if we fail to find
the default version in riscv_parsing_subset_version, and then call
riscv_add_subset to add the subset into subset list.
(riscv_parse_prefixed_ext): Likewise.
(riscv_std_z_ext_strtab): Support Zicsr extensions.
* elfnn-riscv.c (riscv_merge_std_ext): Use strcasecmp to compare the
strings rather than characters.
riscv_merge_arch_attr_info): The callback function get_default_version
is only needed for assembler, so set it to NULL int the linker.
* elfxx-riscv.c (riscv_estimate_digit): Remove the static.
* elfxx-riscv.h: Updated.
gas * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Updated.
* config/tc-riscv.c (default_arch_with_ext, default_isa_spec):
Static variables which are used to set the ISA extensions. You can
use -march (or ELF build attributes) and -misa-spec to set them,
respectively.
(ext_version_hash): The hash table used to handle the extensions
with versions.
(init_ext_version_hash): Initialize the ext_version_hash according
to riscv_ext_version_table.
(riscv_get_default_ext_version): The callback function of
riscv_parse_subset_t. According to the choosed ISA spec,
get the default version for the specific extension.
(riscv_set_arch): Set the callback function.
(enum options, struct option md_longopts): Add new option -misa-spec.
(md_parse_option): Do not call riscv_set_arch for -march. We will
call it later in riscv_after_parse_args. Call riscv_get_isa_spec_class
to set default_isa_spec class.
(riscv_after_parse_args): Call init_ext_version_hash to initialize the
ext_version_hash, and then call riscv_set_arch to set the architecture
with versions according to default_arch_with_ext.
* testsuite/gas/riscv/attribute-02.d: Set 0p0 as default version for
x extensions.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: New testcase. For i-ext, we
already set it's version to 2p1 by march, so no need to use the default
2p2 version. For m-ext, we do not set the version by -march and ELF arch
attribute, so set the default 2p0 to it. For zicsr, it is not defined in
ISA spec 2p2, so set 0p0 to it.
* testsuite/gas/riscv/attribute-10.d: New testcase. The version of
zicsr is 2p0 according to ISA spec 20191213.
* config/tc-riscv.c (DEFAULT_RISCV_ARCH_WITH_EXT)
(DEFAULT_RISCV_ISA_SPEC): Default configure option settings.
You can set them by configure options --with-arch and
--with-isa-spec, respectively.
(riscv_set_default_isa_spec): New function used to set the
default ISA spec.
(md_parse_option): Call riscv_set_default_isa_spec rather than
call riscv_get_isa_spec_class directly.
(riscv_after_parse_args): If the -isa-spec is not set, then we
set the default ISA spec according to DEFAULT_RISCV_ISA_SPEC by
calling riscv_set_default_isa_spec.
* testsuite/gas/riscv/attribute-01.d: Add -misa-spec=2.2, since
the --with-isa-spec may be set to different ISA spec.
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* configure.ac: Add configure options, --with-arch and
--with-isa-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (default_priv_spec): Static variable which is
used to check if the CSR is valid for the chosen privilege spec. You
can use -mpriv-spec to set it.
(enum reg_class): We now get the CSR address from csr_extra_hash rather
than reg_names_hash. Therefore, move RCLASS_CSR behind RCLASS_MAX.
(riscv_init_csr_hashes): Only need to initialize one hash table
csr_extra_hash.
(riscv_csr_class_check): Change the return type to void. Don't check
the ISA dependency if -mcsr-check isn't set.
(riscv_csr_version_check): New function. Check and find the CSR address
from csr_extra_hash, according to default_priv_spec. Report warning
for the invalid CSR if -mcsr-check is set.
(reg_csr_lookup_internal): Updated.
(reg_lookup_internal): Likewise.
(md_begin): Updated since DECLARE_CSR and DECLARE_CSR_ALIAS are changed.
(enum options, struct option md_longopts): Add new GAS option -mpriv-spec.
(md_parse_option): Call riscv_set_default_priv_version to set
default_priv_spec.
(riscv_after_parse_args): If -mpriv-spec isn't set, then set the default
privilege spec to the newest one.
(enum riscv_csr_class, struct riscv_csr_extra): Move them to
include/opcode/riscv.h.
* testsuite/gas/riscv/priv-reg-fail-fext.d: This test case just want
to check the ISA dependency for CSR, so fix the spec version by adding
-mpriv-spec=1.11.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise. There are some
version warnings for the test case.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.d: New test case.
Check whether the CSR is valid when privilege version 1.9 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: New test case.
Check whether the CSR is valid when privilege version 1.9.1 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.d: New test case.
Check whether the CSR is valid when privilege version 1.10 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.d: New test case.
Check whether the CSR is valid when privilege version 1.11 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Default configure option
setting. You can set it by configure option --with-priv-spec.
(riscv_set_default_priv_spec): New function used to set the default
privilege spec.
(md_parse_option): Call riscv_set_default_priv_spec rather than
call riscv_get_priv_spec_class directly.
(riscv_after_parse_args): If -mpriv-spec isn't set, then we set the
default privilege spec according to DEFAULT_RISCV_PRIV_SPEC by
calling riscv_set_default_priv_spec.
* testsuite/gas/riscv/csr-dw-regnums.d: Add -mpriv-spec=1.11, since
the --with-priv-spec may be set to different privilege spec.
* testsuite/gas/riscv/priv-reg.d: Likewise.
* configure.ac: Add configure option --with-priv-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (explicit_attr): Rename explicit_arch_attr to
explicit_attr. Set it to TRUE if any ELF attribute is found.
(riscv_set_default_priv_spec): Try to set the default_priv_spec if
the priv attributes are set.
(md_assemble): Set the default_priv_spec according to the priv
attributes when we start to assemble instruction.
(riscv_write_out_attrs): Rename riscv_write_out_arch_attr to
riscv_write_out_attrs. Update the arch and priv attributes. If we
don't set the corresponding ELF attributes, then try to output the
default ones.
(riscv_set_public_attributes): If any ELF attribute or -march-attr
options is set (explicit_attr is TRUE), then call riscv_write_out_attrs
to update the arch and priv attributes.
(s_riscv_attribute): Make sure all arch and priv attributes are set
before any instruction.
* testsuite/gas/riscv/attribute-01.d: Update the priv attributes if any
ELF attribute or -march-attr is set. If the priv attributes are not
set, then try to update them by the default setting (-mpriv-spec or
--with-priv-spec).
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* testsuite/gas/riscv/attribute-08.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: Likewise.
* testsuite/gas/riscv/attribute-10.d: Likewise.
* testsuite/gas/riscv/attribute-unknown.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise. Also, the priv spec
set by priv attributes must be supported.
* testsuite/gas/riscv/attribute-05.s: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Likewise. Updated
priv attributes according to the -mpriv-spec option.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg.d: Removed.
* testsuite/gas/riscv/priv-reg-version-1p9.d: New test case. Dump the
CSR according to the priv spec 1.9.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: New test case. Dump the
CSR according to the priv spec 1.9.1.
* testsuite/gas/riscv/priv-reg-version-1p10.d: New test case. Dump the
CSR according to the priv spec 1.10.
* testsuite/gas/riscv/priv-reg-version-1p11.d: New test case. Dump the
CSR according to the priv spec 1.11.
* config/tc-riscv.c (md_show_usage): Add descriptions about
the new GAS options.
* doc/c-riscv.texi: Likewise.
Now that ISA3.1 is out we can finish with the powerxx silliness.
bfd/
* elf64-ppc.c: Rename powerxx to power10 throughout.
gas/
* config/tc-ppc.c (md_assemble): Update for PPC_OPCODE_POWER10
renaming.
* testsuite/gas/ppc/prefix-align.d: Use -mpower10/-Mpower10 in
place of -mfuture/-Mfuture.
* testsuite/gas/ppc/prefix-pcrel.d: Likewise.
* testsuite/gas/ppc/prefix-reloc.d: Likewise.
gold/
* powerpc.cc: Rename powerxx to power10 throughout.
include/
* elf/ppc64.h: Update comment.
* opcode/ppc.h (PPC_OPCODE_POWER10): Rename from PPC_OPCODE_POWERXX.
ld/
* testsuite/ld-powerpc/callstub-1.d: Use -mpower10/-Mpower10 in
place of -mfuture/-Mfuture.
* testsuite/ld-powerpc/notoc2.d: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Likewise.
* testsuite/ld-powerpc/tlsgd.d: Likewise.
* testsuite/ld-powerpc/tlsie.d: Likewise.
* testsuite/ld-powerpc/tlsld.d: Likewise.
opcodes/
* ppc-dis.c (ppc_opts): Add "power10" entry.
(print_insn_powerpc): Update for PPC_OPCODE_POWER10 renaming.
* ppc-opc.c (POWER10): Rename from POWERXX. Update all uses.
When a coredump is generated, there are a few registers in
ARC HS that are put under a special section, namely ".reg-v2".
It is for backward compatibility reasons with older tools that
we have decided not to extend the generic ".reg" section.
This patch makes it possible to display the information better
regarding that section. Compare the output of "readelf" without
and with these changes:
$ readelf -n core # without the patch
...
LINUX 0x0000000c Unknown note type: (0x00000600)
description data: 78 08 00 00 2f 6c 64 2d 75 43 6c 69
$ readelf -n core # with the patch
...
LINUX 0x0000000c NT_ARC_V2 (ARC HS accumulator/extra registers)
description data: 78 08 00 00 2f 6c 64 2d 75 43 6c 69
In another commit (soon to be submitted), GDB will makes use of these
changes to parse the extra section and its registers.
bfd/ChangeLog
2020-03-26 Anton Kolesov <anton.kolesov@synopsys.com>
* elf-bfd.h (elfcore_write_arc_v2): Add prototype.
* elf.c (elfcore_grok_arc_v2): New function.
(elfcore_grok_note): Call the new function to handle the corresponding
note.
(elfcore_write_arc_v2): New function.
(elfcore_write_register_note): Call the new function to handle the
corresponding pseudo-sections.
binutils/ChangeLog
2020-03-26 Anton Kolesov <anton.kolesov@synopsys.com>
* readelf.c (get_note_type): Handle NT_ARC_V2.
include/elf/ChangeLog
2020-03-26 Anton Kolesov <anton.kolesov@synopsys.com>
* common.h (NT_ARC_V2): New macro definitions.
Introduce new relaxations XTENSA_PDIFF{8,16,32} for positive differences
(subtracted symbol precedes diminished symbol) and XTENSA_NDIFF{8,16,32}
for negative differences (subtracted symbol follows diminished symbol).
Don't generate XTENSA_DIFF relocations in the assembler, generate
XTENSA_PDIFF or XTENSA_NDIFF based on relative symbol position.
Handle XTENSA_DIFF in BFD for compatibility with old object files.
Handle XTENSA_PDIFF and XTENSA_NDIFF in BFD, treating difference value
as unsigned.
2020-04-22 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* bfd-in2.h: Regenerated.
* elf32-xtensa.c (elf_howto_table): New entries for
R_XTENSA_PDIFF{8,16,32} and R_XTENSA_NDIFF{8,16,32}.
(elf_xtensa_reloc_type_lookup, elf_xtensa_do_reloc)
(relax_section): Add cases for R_XTENSA_PDIFF{8,16,32} and
R_XTENSA_NDIFF{8,16,32}.
* libbfd.h (bfd_reloc_code_real_names): Add names for
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32}.
* reloc.c: Add documentation for BFD_RELOC_XTENSA_PDIFF{8,16,32}
and BFD_RELOC_XTENSA_NDIFF{8,16,32}.
binutils/
* readelf.c (is_none_reloc): Recognize
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32}.
gas/
* config/tc-xtensa.c (md_apply_fix): Replace
BFD_RELOC_XTENSA_DIFF{8,16,32} generation with
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32} generation.
* testsuite/gas/xtensa/loc.d: Replace BFD_RELOC_XTENSA_DIFF16
with BFD_RELOC_XTENSA_PDIFF16 in the expected output.
include/
* elf/xtensa.h (elf_xtensa_reloc_type): New entries for
R_XTENSA_PDIFF{8,16,32} and R_XTENSA_NDIFF{8,16,32}.
ld/
* testsuite/ld-xtensa/relax-loc.d: New test definition.
* testsuite/ld-xtensa/relax-loc.s: New test source.
* testsuite/ld-xtensa/xtensa.exp (relax-loc): New test.
git commit 211dc24b87 removed most sh5 and sh64 SuperH support, after
they were obsoleted by git commit 2b213129c5. This patch removes a
few remaining pieces that should have gone with 211dc24b87.
include/
* elf/sh.h (STO_SH5_ISA32, SHF_SH5_ISA32, SHF_SH5_ISA32_MIXED),
(SHT_SH5_CR_SORTED, STT_DATALABEL): Delete.
bfd/
* elf32-sh.c (sh_elf_relocate_section): Remove STO_SH5_ISA32
processing.
The stub size in GO32 executables has historically been fixed at 2048
bytes, due to hardcoded limitations in bfd. Recent patches to djgpp by
Stas Sergeev (CC'd) have pushed the stub right up to this limit, so if
any further expansion is desired, this must first be patched in bfd.
This series includes three patches: The first changes the meaning of
the bfd->origin field slightly, so that target code can use this to
specify an offset into the file where the actual bfd is located.
The second patch then uses this to enable support for variable-sized
stubs in the coff-go32-exe format.
The final patch is only a cleanup, it normalizes function and variable
names in coff-stgo32.c so that they all begin with the same prefix.
bfd * bfdio.c (bfd_bread, bfd_tell, bfd_seek, bfd_mmap): Always add
bfd->origin to file offset.
* bfdwin.c (bfd_get_file_window): Likewise.
* bfd.c: Clarify the use of the bfd->origin field.
* bfd-in2.h: Regenerate.
* coff-i386.c: Don't include go32exe.h. Allow overriding
coff_write_object_contents via COFF_WRITE_CONTENTS.
* coff-stgo32.c (go32exe_cleanup, go32exe_mkobject)
(go32exe_write_object_contents): New functions.
(go32exe_temp_stub, go32exe_temp_stub_size): New static globals.
(COFF_WRITE_CONTENTS, GO32EXE_DEFAULT_STUB_SIZE): Define.
(create_go32_stub): Remove check for 2k size limit. Read stub
from go32exe_temp_stub if present.
(go32_stubbed_coff_bfd_copy_private_bfd_data): Allocate and
copy variable-length stub.
(go32_check_format): Read stub to go32exe_temp_stub, set
origin, return go32exe_cleanup.
(adjust_filehdr_in_post, adjust_filehdr_out_pre)
(adjust_filehdr_out_post, adjust_scnhdr_in_post)
(adjust_scnhdr_out_pre, adjust_scnhdr_out_post)
(adjust_aux_in_post, adjust_aux_out_pre, adjust_aux_out_post):
Remove functions and their associated #defines.
* coffcode.h (coff_mkobject_hook): Remove stub copying code.
* libcoff-in.h: (struct coff_tdata): New field stub_size.
Rename field go32stub to stub.
* libcoff.h: Regenerate.
* coff-stgo32.c (go32_check_format): Rename to...
(go32exe_check_format): ...this.
(go32_stubbed_coff_bfd_copy_private_bfd_data): Rename to...
(go32exe_copy_private_bfd_data): ...this.
(stub_bytes): Rename to...
(go32exe_default_stub): ...this.
(create_go32_stub): Rename to...
(go32exe_create_stub): ...this.
* coff-stgo32.c (go32exe_copy_private_bfd_data): Avoid realloc
when possible.
include * coff/go32exe.h: Remove file.
* coff/internal.h (struct internal_filehdr): Remove field
go32stub. Remove flag F_GO32STUB.
FreeBSD's kernel recently added a new ELF auxiliary vector entry
holding a mask of software features provided by the kernel. This
change fixes 'info auxv' to report the name and description for this
vector entry instead of '???'.
include/ChangeLog:
* elf/common.h (AT_FREEBSD_BSDFLAGS): Define.
gdb/ChangeLog:
* fbsd-tdep.c (fbsd_print_auxv_entry): Handle AT_FREEBSD_BSDFLAGS.
Fix comma at end of enumerator list seen with -std=c++98.
* plugin-api.h (enum ld_plugin_symbol_type): Remove
comma after last value of an enum.
* lto-symtab.h (enum gcc_plugin_symbol_type): Likewise.
bfd/ChangeLog:
* elf.c (elfcore_grok_netbsd_note): Add support for
NT_NETBSDCORE_LWPSTATUS notes.
binutils/ChangeLog:
* readelf.c (get_netbsd_elfcore_note_type): Add support for
NT_NETBSDCORE_LWPSTATUS notes.
include/ChangeLog:
* elf/common.h (NT_NETBSDCORE_LWPSTATUS): New define.
Fixes additional locations not handled in the first patch.
When converting between addresses in ELF headers [octets] and bfd
LMA/VMA [bytes], the number of octets per byte needs to be incorporated.
include/
* bfdlink.h (struct bfd_link_order): Add unit (bytes/octets) to
offset and size members.
* elf/internal.h (struct elf_internal_phdr): Likewise for
p_align member.
(struct elf_segment_map): Likewise for p_paddr and p_size
members
bfd/
* bfd.c (bfd_record_phdr): New local "opb". Fix assignment of
"p_paddr" from "at".
* elfcode.h (bfd_from_remote_memory): Add units to several
parameters. New local "opb". Fix usage of p_align. Fix
calculation of "localbase" from "ehdr_vma" and "p_vaddr". Fix
call of target_read_memory.
* elflink.c (elf_fixup_link_order): Fix scope of "s" local. Fix
calculation of "offset" and "output_offset".
(bfd_elf_final_link): New local "opb". Fix calculation of "size"
from "offset" and fix calculation of "end" from "vma+size". Fix
comparison between "sh_addr" and "vma"/"output_offset".
(bfd_elf_discard_info): Fix calculation of "eh_alignment".
* elf-bfd.h (struct elf_link_hash_table): Add unit to tls_size
member.
* elf.c (_bfd_elf_map_sections_to_segments): Add unit (bytes/
octets) to "wrap_to2 and "phdr_size" locals. Fix calculation of
"wrap_to" value. Add unit (bytes) to phdr_lma variable. Fix
assignment of p_paddr from phdr_lma. Fix comparison between
"lma+size" and "next->lma".
(elf_sort_segments): Fix assignment from p_paddr to lma.
(assign_file_positions_for_load_sections): Add unit (bytes) to
local "align". Fix calculation of local "off_adjust". Fix
calculation of local "filehdr_vaddr".
(assign_file_positions_for_non_load_sections): New local "opb".
Fix calculation of "end" from "p_size". Fix comparison between
"vma+SECTION_SIZE" and "start". Fix calculation of "p_memsz"
from "end" and "p_vaddr".
(rewrite_elf_program_header): Fix comparison between p_vaddr and
vma. Fix assignment to p_paddr from lma. Fix comparison between
p_paddr and lma. Fix assignment to p_paddr from lma.
* merge.c (sec_merge_emit): New local "opb". Convert
"alignment_power" to octets.
(_bfd_add_merge_section): New locals "alignment_power" and
"opb". Fix comparison between "alignment_power" and
"sizeof(align)".
(_bfd_merge_sections): New local "opb". Divide size by opb
before checking align mask.
When converting between addresses in ELF headers [octets] and bfd
LMA/VMA [bytes], the number of octets per byte needs to be
incorporated.
In ld, the SIZEOF_HEADERS linker script statement must be resolved to
bytes instead of octets.
include/
* elf/internal.h (struct elf_internal_phdr): Add unit (octets)
to several member field comments.
(Elf_Internal_Shdr): likewise.
bfd/
* elf.c (_bfd_elf_make_section_from_shdr): Introduce new temp
opb. Divide Elf_Internal_Shdr::sh_addr by opb when setting
section LMA/VMA.
(_bfd_elf_make_section_from_phdr): Similarly.
(elf_fake_sections): Fix calculation of
Elf_Internal_shdr::sh_addr from section VMA.
(_bfd_elf_map_sections_to_segments): Fix mixup between octets
and bytes.
(assign_file_positions_for_load_sections): Fix calculations of
Elf_Internal_shdr::p_vaddr and p_paddr from section LMA/VMA. Fix
comparison between program header address and section LMA.
(assign_file_positions_for_non_load_sections): Likewise.
(rewrite_elf_program_header): Likewise. Introduce new temp opb.
(IS_CONTAINED_BY_VMA): Add parameter opb.
(IS_CONTAINED_BY_LMA,IS_SECTION_IN_INPUT_SEGMENT,
INCLUDE_SECTION_IN_SEGMENT): Likewise.
(copy_elf_program_header): Update call to ELF_SECTION_IN_SEGMENT.
Fix calculations of p_addr_valid and p_vaddr_offset.
* elflink.c (elf_link_add_object_symbols): Multiply section VMA
with octets per byte when comparing against p_vaddr.
ld/
* ldexp.c (fold_name): Return SIZEOF_HEADERS in bytes.
This commit pulls in the latest changes for the include/ and
libiberty/ directories. The last sync was in commit
533da48302.
This commit also removes the file libiberty/rust-demangle.h, this file
has been removed in upstream GCC, and should have been deleted as part
of the previous sync up, which included this ChangeLog entry:
2019-11-16 Eduard-Mihai Burtescu <eddyb@lyken.rs>
....
* rust-demangle.h: Remove.
I've grep'd over the binutils-gdb source and can find no reference to
the rust-demangle.h file, and everything seems to build fine without
it, so I assume its continued existence was a mistake.
include/ChangeLog:
Import from gcc mainline:
2020-02-05 Andrew Burgess <andrew.burgess@embecosm.com>
* hashtab.h (htab_remove_elt): Make a parameter const.
(htab_remove_elt_with_hash): Likewise.
libiberty/ChangeLog:
* rust-demangle.h: Removed.
Import from gcc mainline:
2020-02-05 Andrew Burgess <andrew.burgess@embecosm.com>
* hashtab.c (htab_remove_elt): Make a parameter const.
(htab_remove_elt_with_hash): Likewise.
2020-01-23 Alexandre Oliva <oliva@adacore.com>
* argv.c (writeargv): Output empty args as "".
2020-01-18 Iain Sandoe <iain@sandoe.co.uk>
* cp-demangle.c (cplus_demangle_operators): Add the co_await
operator.
* testsuite/demangle-expected: Test co_await operator mangling.
According to the riscv privilege spec, some CSR are only valid when rv32 or
the specific extension is set. We extend the DECLARE_CSR and DECLARE_CSR_ALIAS
to record more informaton we need, and then check whether the CSR is valid
according to these information. We report warning message when the CSR is
invalid, so we have a choice between error and warning by --fatal-warnings
option. Also, a --no-warn/-W option is used to turn the warnings off, if
people don't want the warnings.
gas/
* config/tc-riscv.c (enum riscv_csr_class): New enum. Used to decide
whether or not this CSR is legal in the current ISA string.
(struct riscv_csr_extra): New structure to hold all extra information
of CSR.
(riscv_init_csr_hash): New function. According to the DECLARE_CSR and
DECLARE_CSR_ALIAS, insert CSR extra information into csr_extra_hash.
Call hash_reg_name to insert CSR address into reg_names_hash.
(md_begin): Call riscv_init_csr_hashes for each DECLARE_CSR.
(reg_csr_lookup_internal, riscv_csr_class_check): New functions.
Decide whether the CSR is valid according to the csr_extra_hash.
(init_opcode_hash): Update 'if (hash_error != NULL)' as hash_error is
not a boolean. This is same as riscv_init_csr_hash, so keep the
consistent usage.
* testsuite/gas/riscv/csr-dw-regnums.d: Add -march=rv32if option.
* testsuite/gas/riscv/priv-reg.d: Add f-ext by -march option.
* testsuite/gas/riscv/priv-reg-fail-fext.d: New testcase. The source
file is `priv-reg.s`, and the ISA is rv32i without f-ext, so the
f-ext CSR are not allowed.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.d: New testcase. The
source file is `priv-reg.s`, and the ISA is rv64if, so the
rv32-only CSR are not allowed.
* testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
include/
* opcode/riscv-opc.h: Extend DECLARE_CSR and DECLARE_CSR_ALIAS to
record riscv_csr_class.
opcodes/
* riscv-dis.c (print_insn_args): Updated since the DECLARE_CSR is changed.
gdb/
* riscv-tdep.c: Updated since the DECLARE_CSR is changed.
* riscv-tdep.h: Likewise.
* features/riscv/rebuild-csr-xml.sh: Generate the 64bit-csr.xml without
rv32-only CSR.
* features/riscv/64bit-csr.xml: Regernated.
binutils/
* dwarf.c: Updated since the DECLARE_CSR is changed.
This patch is part of a series that adds support for the Armv8.m
ARMv8.m Custom Datapath Extension to binutils.
This patch introduces the Custom Instructions Class 1/2/3 (Single/
Dual, Accumulator/Non-accumulator varianats) to the arm backend.
The following Custom Instructions are added: cx1, cx1a,
cx1d, cx1da, cx2, cx2a, cx2d, cx2da, cx3, cx3a, cx3d, cx3da.
Specification can be found at
https://developer.arm.com/docs/ddi0607/latest
This patch distinguishes between enabling CDE for different coprocessor
numbers by defining multiple architecture flags. This means that the
parsing of the architecture extension flags is kept entirely in the
existing code path.
We introduce a new IT block state to indicate the behaviour of these
instructions. This new state allows being used in an IT block or
outside an IT block, but does not allow the instruction to be used
inside a VPT block.
We need this since the CX*A instruction versions can be used in IT
blocks, but they aren't to have the conditional suffixes on them. Hence
we need to mark an instruction as allowed in either position.
We also need a new flag to objdump, in order to determine whether to
disassemble an instruction as CDE related or not.
Successfully regression tested on arm-none-eabi, and arm-wince-pe.
gas/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (arm_ext_cde*): New feature sets for each
CDE coprocessor that can be enabled.
(enum pred_instruction_type): New pred type.
(BAD_NO_VPT): New error message.
(BAD_CDE): New error message.
(BAD_CDE_COPROC): New error message.
(enum operand_parse_code): Add new immediate operands.
(parse_operands): Account for new immediate operands.
(check_cde_operand): New.
(cde_coproc_enabled): New.
(cde_coproc_pos): New.
(cde_handle_coproc): New.
(cxn_handle_predication): New.
(do_custom_instruction_1): New.
(do_custom_instruction_2): New.
(do_custom_instruction_3): New.
(do_cx1): New.
(do_cx1a): New.
(do_cx1d): New.
(do_cx1da): New.
(do_cx2): New.
(do_cx2a): New.
(do_cx2d): New.
(do_cx2da): New.
(do_cx3): New.
(do_cx3a): New.
(do_cx3d): New.
(do_cx3da): New.
(handle_pred_state): Define new IT block behaviour.
(insns): Add newn CX*{,d}{,a} instructions.
(CDE_EXTENSIONS,armv8m_main_ext_table,armv8_1m_main_ext_table):
Define new cdecp extension strings.
* doc/c-arm.texi: Document new cdecp extension arguments.
* testsuite/gas/arm/cde-scalar.d: New test.
* testsuite/gas/arm/cde-scalar.s: New test.
* testsuite/gas/arm/cde-warnings.d: New test.
* testsuite/gas/arm/cde-warnings.l: New test.
* testsuite/gas/arm/cde-warnings.s: New test.
* testsuite/gas/arm/cde.d: New test.
* testsuite/gas/arm/cde.s: New test.
include/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/arm.h (ARM_EXT2_CDE): New extension macro.
(ARM_EXT2_CDE0): New extension macro.
(ARM_EXT2_CDE1): New extension macro.
(ARM_EXT2_CDE2): New extension macro.
(ARM_EXT2_CDE3): New extension macro.
(ARM_EXT2_CDE4): New extension macro.
(ARM_EXT2_CDE5): New extension macro.
(ARM_EXT2_CDE6): New extension macro.
(ARM_EXT2_CDE7): New extension macro.
opcodes/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (struct cdeopcode32): New.
(CDE_OPCODE): New macro.
(cde_opcodes): New disassembly table.
(regnames): New option to table.
(cde_coprocs): New global variable.
(print_insn_cde): New
(print_insn_thumb32): Use print_insn_cde.
(parse_arm_disassembler_options): Parse coprocN args.
PR 25469
bfd * archures.c: Add GBZ80 and Z80N machine values.
* reloc.c: Add BFD_RELOC_Z80_16_BE.
* coff-z80.c: Add support for new reloc.
* coffcode.h: Add support for new machine values.
* cpu-z80.c: Add support for new machine names.
* elf32-z80.c: Add support for new reloc.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
binutils* readelf.c (get_machine_flags): Add support for Z80N machine
number.
gas * config/tc-z80.c: Add -gbz80 command line option to generate code
for the GameBoy Z80. Add support for generating DWARF.
* config/tc-z80.h: Add support for DWARF debug information
generation.
* doc/c-z80.texi: Document new command line option.
* testsuite/gas/z80/gbz80_all.d: New file.
* testsuite/gas/z80/gbz80_all.s: New file.
* testsuite/gas/z80/z80.exp: Run the new tests.
* testsuite/gas/z80/z80n_all.d: New file.
* testsuite/gas/z80/z80n_all.s: New file.
* testsuite/gas/z80/z80n_reloc.d: New file.
include * coff/internal.h (R_IMM16BE): Define.
* elf/z80.h (EF_Z80_MACH_Z80N): Define.
(R_Z80_16_BE): New reloc.
ld * emulparams/elf32z80.sh: Use z80 emulation.
* emultempl/z80.em: Make generic to both COFF and ELF Z80 emulations.
* emultempl/z80elf.em: Delete.
* testsuite/ld-elf/pr22450.d: Expect to fail for the Z80.
* testsuite/ld-elf/sec64k.exp: Fix Z80 assembly.
* testsuite/ld-unique/pr21529.s: Avoid register name conflict.
* testsuite/ld-unique/unique.s: Likewise.
* testsuite/ld-unique/unique_empty.s: Likewise.
* testsuite/ld-unique/unique_shared.s: Likewise.
* testsuite/ld-unique/unique.d: Updated expected output.
* testsuite/ld-z80/arch_z80n.d: New file.
* testsuite/ld-z80/comb_arch_z80_z80n.d: New file.
* testsuite/ld-z80/labels.s: Add more labels.
* testsuite/ld-z80/relocs.s: Add more reloc tests.
* testsuite/ld-z80/relocs_f_z80n.d: New file
opcodes * z80-dis.c: Add support for GBZ80 opcodes.
IMAGE_DEBUG_TYPE_REPRO is defined in the latest version of the PE
specification [1]. The others are defined in Windows SDK headers and/or
reported by DUMPBIN.
[1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format
bfd/ChangeLog:
2020-01-16 Jon Turney <jon.turney@dronecode.org.uk>
* peXXigen.c (debug_type_names): Add names for new debug data type
values.
include/ChangeLog:
2020-01-16 Jon Turney <jon.turney@dronecode.org.uk>
* coff/internal.h (PE_IMAGE_DEBUG_TYPE_VC_FEATURE)
(PE_IMAGE_DEBUG_TYPE_POGO, PE_IMAGE_DEBUG_TYPE_ILTCG)
(PE_IMAGE_DEBUG_TYPE_MPX, PE_IMAGE_DEBUG_TYPE_REPRO): Add.
This patch moves MVE feature bits into the CORE_HIGH section. This makes sure
.fpu and -mfpu does not reset the bits set by MVE. This is important because
.fpu has no option to "set" these same bits and thus, mimic'ing GCC, we choose
to define MVE as an architecture extension rather than put it together with
other the legacy fpu features.
This will enable the following behavior:
.arch armv8.1-m.main
.arch mve
.fpu fpv5-sp-d16 #does not disable mve.
vadd.i32 q0, q1, q2
This patch also makes sure MVE is not taken into account during auto-detect.
This was already the case, but because we moved the MVE bits to the
architecture feature space we must make sure ARM_ANY does not include MVE.
gas/ChangeLog:
2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 25376
* config/tc-arm.c (mve_ext, mve_fp_ext): Use CORE_HIGH.
(armv8_1m_main_ext_table): Use CORE_HIGH for mve.
* testsuite/arm/armv8_1-m-fpu-mve-1.s: New.
* testsuite/arm/armv8_1-m-fpu-mve-1.d: New.
* testsuite/arm/armv8_1-m-fpu-mve-2.s: New.
* testsuite/arm/armv8_1-m-fpu-mve-2.d: New.
include/ChangeLog:
2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 25376
* opcodes/arm.h (FPU_MVE, FPU_MVE_FPU): Move these features to...
(ARM_EXT2_MVE, ARM_EXT2_MVE_FP): ... the CORE_HIGH space.
(ARM_ANY): Redefine to not include any MVE bits.
(ARM_FEATURE_ALL): Removed.
opcodes/ChangeLog:
2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 25376
* opcodes/arm-dis.c (coprocessor_opcodes): Use CORE_HIGH for MVE bits.
(neon_opcodes): Likewise.
(select_arm_features): Make sure we enable MVE bits when selecting
armv8.1-m.main. Make sure we do not enable MVE bits when not selecting
any architecture.
gas/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/tc-msp430.c (CHECK_RELOC_MSP430): Always generate 430X
relocations when the target is 430X, except when extracting part of an
expression.
(msp430_srcoperand): Adjust comment.
Initialize the expp member of the msp430_operand_s struct as
appropriate.
(msp430_dstoperand): Likewise.
* testsuite/gas/msp430/msp430.exp: Run new test.
* testsuite/gas/msp430/reloc-lo-430x.d: New test.
* testsuite/gas/msp430/reloc-lo-430x.s: New test.
include/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* opcode/msp430.h (enum msp430_expp_e): New.
(struct msp430_operand_s): Add expp member to struct.
ld/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new test.
* testsuite/ld-msp430-elf/reloc-lo-430x.s: New test.
Don't do that. Especially don't use shift counts that assume the type
being shifted is 32 bits when the type is long/unsigned long. Also
reverts part of a change I made on 2019-12-11 to tic4x_print_register
that on closer inspection turns out to be unnecessary.
include/
* opcode/tic4x.h (EXTR): Delete.
(EXTRU, EXTRS, INSERTU, INSERTS): Rewrite without zero/sign
extension using shifts. Do trim INSERTU value to specified bitfield.
opcodes/
* tic4x-dis.c (tic4x_print_register): Remove dead code.
gas/
* config/tc-tic4x.c (tic4x_operands_match): Correct tic3x trap
insertion.
Also fixes a real bug. The DECODE_INSN_I9a and DECODE_INSN_I9b both
use UNSIGNED_EXTRACT for 7 low bits of the result, but this was an
unsigned value due to "insn" being unsigned. DECODE_INSN_I9* is
therefore unsigned too, leading to a zero extension in an expression
using a bfd_vma if bfd_vma is 64 bits.
* opcode/spu.h: Formatting.
(UNSIGNED_EXTRACT): Use 1u.
(SIGNED_EXTRACT): Don't sign extend with shifts.
(DECODE_INSN_I9a, DECODE_INSN_I9b): Avoid left shift of signed value.
Keep result signed.
(DECODE_INSN_U9a, DECODE_INSN_U9b): Delete.
This patch changes the "class" of LLOCK/SCOND from "MEMORY" to
"LLOCK/SCOND" respectively. Moreover, it corrects the "data_size_mode".
These changes are necessary for GDB's atmoic sequence handler.
Signed-off-by: Shahab Vahedi <shahab@synopsys.com>
PR 25224
bfd * Makefile.am: Add z80-elf target support.
* configure.ac: Likewise.
* targets.c: Likewise.
* config.bfd: Add z80-elf target support and new arches: ez80 and z180.
* elf32-z80.c: New file.
* archures.c: Add new z80 architectures: eZ80 and Z180.
* coffcode.h: Likewise.
* cpu-z80.c: Likewise.
* bfd-in2.h: Likewise plus additional Z80 relocations.
* coff-z80.c: Add new relocations for Z80 target and local label check.
gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support
for assembler code generated by SDCC. Add new relocation types. Add
z80-elf target support.
* config/tc-z80.h: Add z80-elf target support. Enable dollar local
labels. Local labels starts from ".L".
* testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict.
* testsuite/gas/all/fwdexp.s: Likewise.
* testsuite/gas/z80/suffix.d: Fix failure on ELF target.
* testsuite/gas/z80/z80.exp: Add new tests
* testsuite/gas/z80/dollar.d: New file.
* testsuite/gas/z80/dollar.s: New file.
* testsuite/gas/z80/ez80_adl_all.d: New file.
* testsuite/gas/z80/ez80_adl_all.s: New file.
* testsuite/gas/z80/ez80_adl_suf.d: New file.
* testsuite/gas/z80/ez80_isuf.s: New file.
* testsuite/gas/z80/ez80_z80_all.d: New file.
* testsuite/gas/z80/ez80_z80_all.s: New file.
* testsuite/gas/z80/ez80_z80_suf.d: New file.
* testsuite/gas/z80/r800_extra.d: New file.
* testsuite/gas/z80/r800_extra.s: New file.
* testsuite/gas/z80/r800_ii8.d: New file.
* testsuite/gas/z80/r800_z80_doc.d: New file.
* testsuite/gas/z80/z180.d: New file.
* testsuite/gas/z80/z180.s: New file.
* testsuite/gas/z80/z180_z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.s: New file.
* testsuite/gas/z80/z80_ii8.d: New file.
* testsuite/gas/z80/z80_ii8.s: New file.
* testsuite/gas/z80/z80_in_f_c.d: New file.
* testsuite/gas/z80/z80_in_f_c.s: New file.
* testsuite/gas/z80/z80_op_ii_ld.d: New file.
* testsuite/gas/z80/z80_op_ii_ld.s: New file.
* testsuite/gas/z80/z80_out_c_0.d: New file.
* testsuite/gas/z80/z80_out_c_0.s: New file.
* testsuite/gas/z80/z80_reloc.d: New file.
* testsuite/gas/z80/z80_reloc.s: New file.
* testsuite/gas/z80/z80_sli.d: New file.
* testsuite/gas/z80/z80_sli.s: New file.
ld * Makefile.am: Add new target z80-elf
* configure.tgt: Likewise.
* emultempl/z80.em: Add support for eZ80 and Z180 architectures.
* emulparams/elf32z80.sh: New file.
* emultempl/z80elf.em: Likewise.
* testsuite/ld-z80/arch_ez80_adl.d: Likewise.
* testsuite/ld-z80/arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/arch_r800.d: Likewise.
* testsuite/ld-z80/arch_z180.d: Likewise.
* testsuite/ld-z80/arch_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_z180.d: Likewise.
* testsuite/ld-z80/labels.s: Likewise.
* testsuite/ld-z80/relocs.s: Likewise.
* testsuite/ld-z80/relocs_b_ez80.d: Likewise.
* testsuite/ld-z80/relocs_b_z80.d: Likewise.
* testsuite/ld-z80/relocs_f_z80.d: Likewise.
* testsuite/ld-z80/z80.exp: Likewise.
opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
