Define NT_X86_CET which is the proposed note for x86 CET state to support
Intel CET in Linux kernel. Double check it after Intel CET patches have
been merged into Linux kernel.
binutils/
* readelf.c (get_note_type): Support NT_X86_CET.
include/
* elf/common.h (NT_X86_CET): New.
PR 26595
* dwarf.c (load_separate_debug_info): Return NULL rather than
FALSE in error situations.
(load_separate_debug_file): Move code to load debug links to ...
(check_for_and_load_links): ... here. New function. Load
separate debug information pointed to by debuglink and
debugaltlink sections. Recursively scan newly loaded debug
information for more links and load them too.
The associated check function doesn't do anything with its "data"
param, so nothing to adjust there.
PR 26578
* dwarf.c (parse_gnu_debugaltlink): Don't alloc build_id_data.
(load_separate_debug_files): Use a stack var for build_id_data.
Pass --disable-reloc-section on PE targets for PR 25662 test since
commit 514b4e191d
Author: Jeremy Drake <sourceware-bugzilla@jdrake.com>
Date: Thu Aug 27 12:58:27 2020 +0100
Change the default characteristics of DLLs built by the linker to more secure settings.
defaulted to --enable-reloc-section.
PR ld/26587
* testsuite/binutils-all/objcopy.exp: Pass --disable-reloc-section
to ld on PE targets for PR 25662 test.
Link-time relaxations of branches are common for MSP430, given that GCC
can generate pessimal branch instructions, and the
-mcode-region=either/-mdata-region=either options to shuffle sections
can further change the type of branch instruction required.
These relaxations can result in invalid code when .uleb128
directives, used in the .gcc_except_table section, are used to calculate
the distance between two labels. A value for the .uleb128 directive is
calculated at assembly-time, and can't be updated at link-time, even if
relaxation causes the distance between the labels to change.
This patch adds relocations for subtract expressions in .uleb128
directives, to allow the linker to re-calculate the value of these
expressions after relaxation has been performed.
bfd/ChangeLog:
* bfd-in2.h (bfd_reloc_code_real): Add
BFD_RELOC_MSP430_{SET,SUB}_ULEB128.
* elf32-msp430.c (msp430_elf_ignore_reloc): New.
(elf_msp430_howto_table): Add R_MSP430{,X}_GNU_{SET,SUB}_ULEB128.
(msp430_reloc_map): Add R_MSP430_GNU_{SET,SUB}_ULEB128.
(msp430x_reloc_map): Add R_MSP430X_GNU_{SET,SUB}_ULEB128.
(write_uleb128): New.
(msp430_final_link_relocate): Handle R_MSP430{,X}_GNU_{SET,SUB}_ULEB128.
* libbfd.c (_bfd_write_unsigned_leb128): New.
* libbfd.h (_bfd_write_unsigned_leb128): New prototype.
Add BFD_RELOC_MSP430_{SET,SUB}_ULEB128.
* reloc.c: Document BFD_RELOC_MSP430_{SET,SUB}_ULEB128.
binutils/ChangeLog:
* readelf.c (target_specific_reloc_handling): Handle
R_MSP430{,X}_GNU_{SET,SUB}_ULEB128.
gas/ChangeLog:
* config/tc-msp430.c (msp430_insert_uleb128_fixes): New.
(msp430_md_end): Call msp430_insert_uleb128_fixes.
include/ChangeLog:
* elf/msp430.h (elf_msp430_reloc_type): Add
R_MSP430_GNU_{SET,SUB}_ULEB128.
(elf_msp430x_reloc_type): Add R_MSP430X_GNU_{SET,SUB}_ULEB128.
ld/ChangeLog:
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
* testsuite/ld-msp430-elf/uleb128.s: New test.
* testsuite/ld-msp430-elf/uleb128_430.d: New test.
* testsuite/ld-msp430-elf/uleb128_430x.d: New test.
When compiled on a 32-bit host, a temp var is too small for possible
64-bit values to be calculated.
* readelf.c (print_gnu_build_attribute_name): Make "bytes"
unsigned long long.
The "X" in "MSP430X" indicates an extension to the original MSP430 ISA, but
these functions are generically used for all MSP430 ISAs, so the names should
not use the "X" suffix.
binutils/ChangeLog:
* readelf.c (get_msp430x_section_type_name): Rename to ...
(get_msp430_section_type_name): ... this.
(get_section_type_name): Use get_msp430_section_type_name.
(display_msp430x_attribute): Rename to ...
(display_msp430_attribute): ... this.
(process_arch_specific): Use display_msp430_attribute.
PR 26356
* som.c (som_bfd_copy_private_section_data): Issue error when a
subspace is specified without its containing space.
* testsuite/binutils-all/objcopy.exp (objcopy --reverse-bytes): Add
"-j $PRIVATE$" to command on hppa*-*-hpux*.
* testsuite/lib/utils-lib.exp (default_binutils_run): Remove existing
dollar-sign quotes before quoting. Do this prior to generating log
output.
When the tokens MCLINE, MCENDLINE, and MCCOMMENT were created, the
line number was not increased, which led to an incorrect value in
the error output.
PR 26088
* mclex.c (skip_until_eol): if eol was found, increment line number
This commit follows on from the earlier commit "libctf, ld, binutils:
add textual error/warning reporting for libctf" and converts every error
in libctf that was reported using ctf_dprintf to use ctf_err_warn
instead, gettextizing them in the process, using N_() where necessary to
avoid doing gettext calls unless an error message is actually generated,
and rephrasing some error messages for ease of translation.
This requires a slight change in the ctf_errwarning_next API: this API
is public but has not been in a release yet, so can still change freely.
The problem is that many errors are emitted at open time (whether
opening of a CTF dict, or opening of a CTF archive): the former of these
throws away its incompletely-initialized ctf_file_t rather than return
it, and the latter has no ctf_file_t at all. So errors and warnings
emitted at open time cannot be stored in the ctf_file_t, and have to go
elsewhere.
We put them in a static local in ctf-subr.c (which is not very
thread-safe: a later commit will improve things here): ctf_err_warn with
a NULL fp adds to this list, and the public interface
ctf_errwarning_next with a NULL fp retrieves from it.
We need a slight exception from the usual iterator rules in this case:
with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error"
which signifies the end of iteration, so we add a new err parameter to
ctf_errwarning_next which is used to report such iteration-related
errors. (If an fp is provided -- i.e., if not reporting open errors --
this is optional, but even if it's optional it's still an API change.
This is actually useful from a usability POV as well, since
ctf_errwarning_next is usually called when there's been an error, so
overwriting the error code with ECTF_NEXT_END is not very helpful!
So, unusually, ctf_errwarning_next now uses the passed fp for its
error code *only* if no errp pointer is passed in, and leaves it
untouched otherwise.)
ld, objdump and readelf are adapted to call ctf_errwarning_next with a
NULL fp to report open errors where appropriate.
The ctf_err_warn API also has to change, gaining a new error-number
parameter which is used to add the error message corresponding to that
error number into the debug stream when LIBCTF_DEBUG is enabled:
changing this API is easy at this point since we are already touching
all existing calls to gettextize them. We need this because the debug
stream should contain the errno's message, but the error reported in the
error/warning stream should *not*, because the caller will probably
report it themselves at failure time regardless, and reporting it in
every error message that leads up to it leads to a ridiculous chattering
on failure, which is likely to end up as ridiculous chattering on stderr
(trimmed a bit):
CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable'
CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable'
CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable'
ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable'
We only need to be told that the parent CTF dictionary is unavailable
*once*, not over and over again!
errmsgs are still emitted on warning generation, because warnings do not
usually lead to a failure propagated up to the caller and reported
there.
Debug-stream messages are not translated. If translation is turned on,
there will be a mixture of English and translated messages in the debug
stream, but rather that than burden the translators with debug-only
output.
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function.
(dump_ctf): Call it on open errors.
* readelf.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function. Support
calls with NULL fp. Adjust for new err parameter to
ctf_errwarning_next.
(dump_section_as_ctf): Call it on open errors.
include/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_errwarning_next): New err parameter.
ld/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp.
Adjust for new err parameter to ctf_errwarning_next. Only
check for assertion failures when fp is non-NULL.
(ldlang_open_ctf): Call it on open errors.
* testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid
breaking the diags tests.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-subr.c (open_errors): New list.
(ctf_err_warn): Calls with NULL fp append to open_errors. Add err
parameter, and use it to decorate the debug stream with errmsgs.
(ctf_err_warn_to_open): Splice errors from a CTF dict into the
open_errors.
(ctf_errwarning_next): Calls with NULL fp report from open_errors.
New err param to report iteration errors (including end-of-iteration)
when fp is NULL.
(ctf_assert_fail_internal): Adjust ctf_err_warn call for new err
parameter: gettextize.
* ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter.
(LCTF_VBYTES): Adjust.
(ctf_err_warn_to_open): New.
(ctf_err_warn): Adjust.
(ctf_bundle): Used in only one place: move...
* ctf-create.c: ... here.
(enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number
down as needed. Don't emit the errmsg. Gettextize.
(membcmp): Likewise.
(ctf_add_type_internal): Likewise.
(ctf_write_mem): Likewise.
(ctf_compress_write): Likewise. Report errors writing the header or
body.
(ctf_write): Likewise.
* ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not
ctf_dprintf, and gettextize, as above.
(ctf_arc_write): Likewise.
(ctf_arc_bufopen): Likewise.
(ctf_arc_open_internal): Likewise.
* ctf-labels.c (ctf_label_iter): Likewise.
* ctf-open-bfd.c (ctf_bfdclose): Likewise.
(ctf_bfdopen): Likewise.
(ctf_bfdopen_ctfsect): Likewise.
(ctf_fdopen): Likewise.
* ctf-string.c (ctf_str_write_strtab): Likewise.
* ctf-types.c (ctf_type_resolve): Likewise.
* ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict.
(get_vbytes_v1): Pass down the ctf dict.
(get_vbytes_v2): Likewise.
(flip_ctf): Likewise.
(flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and
gettextize, as above.
(upgrade_types_v1): Adjust calls.
(init_types): Use ctf_err_warn, not ctf_dprintf, as above.
(ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors
emitted into individual dicts into the open errors if this turns
out to be a failed open in the end.
* ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_dump_funcs): Likewise. Collapse err label into its only case.
(ctf_dump_type): Likewise.
* ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_link_one_type): Likewise.
(ctf_link_lazy_open): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link_deduplicating_count_inputs): Likewise.
(ctf_link_deduplicating_open_inputs): Likewise.
(ctf_link_deduplicating_close_inputs): Likewise.
(ctf_link_deduplicating): Likewise.
(ctf_link): Likewise.
(ctf_link_deduplicating_per_cu): Likewise. Add some missed
ctf_set_errnos to obscure error cases.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new
err argument. Gettextize. Don't emit the errmsg.
(ctf_dedup_populate_mappings): Likewise.
(ctf_dedup_detect_name_ambiguity): Likewise.
(ctf_dedup_init): Likewise.
(ctf_dedup_multiple_input_dicts): Likewise.
(ctf_dedup_conflictify_unshared): Likewise.
(ctf_dedup): Likewise.
(ctf_dedup_rwalk_one_output_mapping): Likewise.
(ctf_dedup_id_to_target): Likewise.
(ctf_dedup_emit_type): Likewise.
(ctf_dedup_emit_struct_members): Likewise.
(ctf_dedup_populate_type_mapping): Likewise.
(ctf_dedup_populate_type_mappings): Likewise.
(ctf_dedup_emit): Likewise.
(ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error
status setting.
(ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide
unknown-type-kind messages (which signify file corruption).
We gettextize under our package name, which we change to a more
reasonable 'libctf'. Our internationalization support is mostly
provided by ctf-intl.h, which is a copy of opcodes/opintl.h with
the non-gettext_noop N_() expansion debracketed to avoid pedantic
compiler warnings.
The libctf error strings returned by ctf_errmsg are marked up for
internationalization.
(We also adjust binutils's Makefile a tiny bit to allow for the
fact that libctf now uses functions from libintl.)
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* Makefile.am (readelf_LDADD): Move $(LIBINTL) after $(LIBCTF_NOBFD).
* Makefile.in: Regenerated.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* configure.ac: Adjust package name to simply 'libctf': arbitrarily
declare this to be version 1.2.0.
* Makefile.am (AM_CPPFLAGS): Add @INCINTL@.
* Makefile.in: Regenerated.
* configure: Regenerated.
* ctf-intl.h: New file, lightly modified from opcodes/opintl.h.
* ctf-impl.h: Include it.
* ctf-error.r (_ctf_errlist_t): Mark strings as noop-translatable.
(ctf_errmsg): Actually translate them.
The symbol string table in the .symtab section is optional and cosmetic.
Keep only one '@' for undefined versioned symbols, which are defined in
shared objects, in the symbol string table. Update "nm -D" to display
only one '@' for undefined versioned symbols.
bfd/
PR ld/26382
* elflink.c (elf_link_output_symstrtab): Keep only one '@' for
versioned symbols, which are defined in shared objects, in
symbol string table.
binutils/
PR ld/26382
* nm.c (print_symname): Display only one '@' for undefined
versioned symbols.
* doc/binutils.texi: Update nm version information.
ld/
PR ld/26382
* testsuite/ld-elf/pr26302.nd: Updated.
* testsuite/ld-elf/pr26302.rd: New file.
* testsuite/ld-elf/shared.exp: Add a test for readelf -sW.
readelf_wi_test checks the DW_AT_LANGUAGE is recognized by matching
against ANSI C. But for the new DWARF5 DW_LANG_C11 readelf simply
prints "C11", not prefixed with ANSI (DW_LANG_C is "non-ANSI C",
DW_LANG_C89 is "ANSI C" and DW_LANG_C99 is "ANSI-C99"). Adjust the
testcase instead of readelf because C11 seems a fine name.
binutils/ChangeLog:
* testsuite/binutils-all/readelf.exp (readelf_wi_test): Also
recognize DW_LANG_C11.
The 't' length modifier isn't in SUSv2, unsurprisingly %tx isn't
recognized by older printf implementations. So even though 't' is
correct for ptrdiff_t we can't use it. Also, _bfd_int64_high and
_bfd_int64_low disappeared in 2008.
PR 26349
* readelf.c (dump_relocations): Use BFD_VMA_FMT to print offset
and info fields.
(dump_section_as_strings): Don't use %tx to display offset.
num_debug_info_entries is used not just as a count but also as a flag
(DEBUG_INFO_UNAVAILABLE) after some errors. That means
num_debug_info_entries can't be used when cleaning up malloc'd info.
PR 26388
* dwarf.c (free_debug_memory): Free alloc_num_debug_info_entries
of debug_information. Correct test of max_loc_offsets and
max_range_lists.
* rddbg.c (read_debugging_info): Free dhandle on error.
This adds a few more sanity checks on ELF objects, and a BFD flag to
disable objcopy and strip when fuzzed input files belong in the "too
hard" basket.
bfd/
PR 26348
* bfd.c (struct bfd): Add read_only.
* elfcode.h (elf_swap_shdr_in): Test both sh_offset and sh_size.
Set read_only on warning.
(elf_object_p): Sanity check program header alignment. Set
read_only on warning.
* bfd-in2.h: Regenerate.
binutils/
PR 26348
* objcopy.c (copy_object): Report file name with endian error.
Error and return on abfd->read_only.
This fixes a couple of small problems in dwarf-mode.el.
First, I noticed that for an attribute like:
<2><136c>: Abbrev Number: 11 (DW_TAG_member)
<136d> DW_AT_name : t
... the "t" would not be font-locked using the function name face.
The problem here is that the regexp assumed the indirect string
format, like:
<12ac> DW_AT_name : (indirect string, offset: 0x1b40): whatever
Here the fix is to adjust the regexp to match both formats.
Second, when following a DIE reference, point could end up on an
attribute instead. This happens when there is a zero-length attribute
with the same "offset" as the following DIE, like:
<12c5> DW_AT_GNU_all_call_sites: 1
<2><12c5>: Abbrev Number: 5 (DW_TAG_formal_parameter)
Here the fix is to search for the DIE by looking for the depth ("<2>"
in the example) as well.
I've bumped the internal version number to make it simpler to install
this using the Emacs package facility.
binutils/ChangeLog
2020-08-12 Tom Tromey <tromey@adacore.com>
* dwarf-mode.el (Version): Now 1.6.
(dwarf-die-button-action): Tighten DIE reference regexp.
(dwarf-font-lock-keywords): Update name regexp.
PR binutils/26331
* readelf.c (do_demangle): New option flag.
(print_symbol): If do_demangle is enabled, demangle the symbol.
(enum long_option_values): New enum to hold long option values.
(options): Add demangle, no-demangle, recursion-limit and
no-recursion-limit options. Alpha sort the table.
(usage): Describe the new options.
(parse_args): Handle the new options.
* NEWS: Mention the new feature.
* doc/binutils.texi: Document the new feature.
* testsuite/binutils-all/readelf.exp: Test the new feature.
* testsuite/binutils-all/mangled.s: New file - assembler source.
* testsuite/binutils-all/readelf.demangled: New file - expected
output from readelf.
A malloc failure triggered by a fuzzed object file isn't a real
problem unless objdump doesn't exit cleanly after the failure, which
it does. However we have bfd_malloc_and_get_section to sanity check
size of uncompressed sections before allocating memory. Use it.
PR 26337
* objdump.c (load_specific_debug_section): Don't malloc space for
section contents, use bfd_malloc_and_get_section.
GDB currently doesn't build on 32-bit Solaris:
* On Solaris 11.4/x86:
In file included from /usr/include/sys/procfs.h:26,
from /vol/src/gnu/gdb/hg/master/dist/gdb/i386-sol2-nat.c:24:
/usr/include/sys/old_procfs.h:31:2: error: #error "Cannot use procfs in the large file compilation environment"
#error "Cannot use procfs in the large file compilation environment"
^~~~~
* On Solaris 11.3/x86 there are several more instances of this.
The interaction between procfs and large-file support historically has
been a royal mess on Solaris:
* There are two versions of the procfs interface:
** The old ioctl-based /proc, deprecated and not used any longer in
either gdb or binutils.
** The `new' (introduced in Solaris 2.6, 1997) structured /proc.
* There are two headers one can possibly include:
** <procfs.h> which only provides the structured /proc, definining
_STRUCTURED_PROC=1 and then including ...
** <sys/procfs.h> which defaults to _STRUCTURED_PROC=0, the ioctl-based
/proc, but provides structured /proc if _STRUCTURED_PROC == 1.
* procfs and the large-file environment didn't go well together:
** Until Solaris 11.3, <sys/procfs.h> would always #error in 32-bit
compilations when the large-file environment was active
(_FILE_OFFSET_BITS == 64).
** In both Solaris 11.4 and Illumos, this restriction was lifted for
structured /proc.
So one has to be careful always to define _STRUCTURED_PROC=1 when
testing for or using <sys/procfs.h> on Solaris. As the errors above
show, this isn't always the case in binutils-gdb right now.
Also one may need to disable large-file support for 32-bit compilations
on Solaris. config/largefile.m4 meant to do this by wrapping the
AC_SYS_LARGEFILE autoconf macro with appropriate checks, yielding
ACX_LARGEFILE. Unfortunately the macro doesn't always succeed because
it neglects the _STRUCTURED_PROC part.
To make things even worse, since GCC 9 g++ predefines
_FILE_OFFSET_BITS=64 on Solaris. So even if largefile.m4 deciced not to
enable large-file support, this has no effect, breaking the gdb build.
This patch addresses all this as follows:
* All tests for the <sys/procfs.h> header are made with
_STRUCTURED_PROC=1, the definition going into the various config.h
files instead of having to make them (and sometimes failing) in the
affected sources.
* To cope with the g++ predefine of _FILE_OFFSET_BITS=64,
-U_FILE_OFFSET_BITS is added to various *_CPPFLAGS variables. It had
been far easier to have just
#undef _FILE_OFFSET_BITS
in config.h, but unfortunately such a construct in config.in is
commented by config.status irrespective of indentation and whitespace
if large-file support is disabled. I found no way around this and
putting the #undef in several global headers for bfd, binutils, ld,
and gdb seemed way more invasive.
* Last, the applicability check in largefile.m4 was modified only to
disable largefile support if really needed. To do so, it checks if
<sys/procfs.h> compiles with _FILE_OFFSET_BITS=64 defined. If it
doesn't, the disabling only happens if gdb exists in-tree and isn't
disabled, otherwise (building binutils from a tarball), there's no
conflict.
What initially confused me was the check for $plugins here, which
originally caused the disabling not to take place. Since AC_PLUGINGS
does enable plugin support if <dlfcn.h> exists (which it does on
Solaris), the disabling never happened.
I could find no explanation why the linker plugin needs large-file
support but thought it would be enough if gld and GCC's lto-plugin
agreed on the _FILE_OFFSET_BITS value. Unfortunately, that's not
enough: lto-plugin uses the simple-object interface from libiberty,
which includes off_t arguments. So to fully disable large-file
support would mean also disabling it in libiberty and its users: gcc
and libstdc++-v3. This seems highly undesirable, so I decided to
disable the linker plugin instead if large-file support won't work.
The patch allows binutils+gdb to build on i386-pc-solaris2.11 (both
Solaris 11.3 and 11.4, using GCC 9.3.0 which is the worst case due to
predefined _FILE_OFFSET_BITS=64). Also regtested on
amd64-pc-solaris2.11 (again on Solaris 11.3 and 11.4),
x86_64-pc-linux-gnu and i686-pc-linux-gnu.
config:
* largefile.m4 (ACX_LARGEFILE) <sparc-*-solaris*|i?86-*-solaris*>:
Check for <sys/procfs.h> incompatilibity with large-file support
on Solaris.
Only disable large-file support and perhaps plugins if needed.
Set, substitute LARGEFILE_CPPFLAGS if so.
bfd:
* bfd.m4 (BFD_SYS_PROCFS_H): New macro.
(BFD_HAVE_SYS_PROCFS_TYPE): Require BFD_SYS_PROCFS_H.
Don't define _STRUCTURED_PROC.
(BFD_HAVE_SYS_PROCFS_TYPE_MEMBER): Likewise.
* elf.c [HAVE_SYS_PROCFS_H] (_STRUCTURED_PROC): Don't define.
* configure.ac: Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>.
* configure, config.in: Regenerate.
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
binutils:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gas:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gdb:
* proc-api.c (_STRUCTURED_PROC): Don't define.
* proc-events.c: Likewise.
* proc-flags.c: Likewise.
* proc-why.c: Likewise.
* procfs.c: Likewise.
* Makefile.in (INTERNAL_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* configure, config.in: Regenerate.
gdbserver:
* configure, config.in: Regenerate.
gdbsupport:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* common.m4 (GDB_AC_COMMON): Use BFD_SYS_PROCFS_H to check for
<sys/procfs.h>.
* Makefile.in: Regenerate.
* configure, config.in: Regenerate.
gnulib:
* configure.ac: Run ACX_LARGEFILE before gl_EARLY.
* configure: Regenerate.
gprof:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
ld:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
Make the MIPS/IRIX naming of local section symbols consistent between
files produced by generic ELF code and ELF linker code, complementing
commit 174fd7f955 ("New bfd elf hook: force naming of local section
symbols"), <https://sourceware.org/ml/binutils/2004-02/msg00072.html>.
Local section symbols have no names in the standard ELF gABI, however
the lack of a name causes problems with IRIX's MIPSpro linker. To work
around the issue we give them names, however we do that in generic ELF
code only, based on what the `elf_backend_name_local_section_symbols'
hook returns if present. That makes objects created by GAS or `objdump'
work correctly, however not ones created by `ld -r'. That would not
normally cause issues with IRIX systems using GAS and `objdump' only
with the MIPSpro linker, however if GNU LD was used for whatever reason
in producing objects later fed to IRIX's MIPSpro linker, then things
would break.
Modify ELF linker code accordingly then, using the same hook. Adjust
the `ld-elf/64ksec-r' test accordingly so that it also accepts a section
symbol with a name.
Also modify the hook itself so that only actual ET_REL objects have
names assigned to local section symbols. Other kinds of ELF files are
not ever supposed to be relocated with the MIPSpro linker, so we can
afford producing more standard output.
Add suitable GAS, LD and `objcopy' test cases to the relevant testsuites
to keep these tools consistently verified. This change also fixes:
FAIL: objcopy executable (pr25662)
across MIPS targets using the IRIX compatibility mode.
bfd/
* elflink.c (bfd_elf_final_link): Give local symbols a name if
so requested.
* elfxx-mips.c (_bfd_mips_elf_name_local_section_symbols): Only
return TRUE if making ET_REL output.
binutils/
* testsuite/binutils-all/mips/global-local-symtab-sort-o32.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-o32t.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-n32.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-n32t.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-n64.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-n64t.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-final-o32.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-final-n32.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-final-n64.d:
New test.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* testsuite/gas/mips/global-local-symtab-sort-o32.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-o32t.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-n32.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-n32t.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-n64.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-n64t.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-elf/sec64k.exp: Also accept a section symbol with
a name.
* testsuite/ld-mips-elf/global-local-symtab-sort-o32.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-o32t.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-n32.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-n32t.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-n64.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-n64t.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-final-o32.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-final-n32.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-final-n64.d: New
test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Correct ELF linker code so as to set the `sh_info' value of the static
symbol table section according to the section symbols vs other symbols
split where required by the selection of the IRIX compatibility mode for
MIPS target. Add a `elf_backend_elfsym_local_is_section' hook for that
purpose, returning TRUE if it is only STB_LOCAL/STT_SECTION symbols that
are to be considered local for the purpose of this split rather than all
STB_LOCAL symbols.
We do it already in generic ELF code, and have done it since 1993, with
the `elf_backend_sym_is_global' hook, affecting GAS and `objcopy', so
these tools produce correct ELF output in the IRIX compatibility mode,
however if such output is fed as input to `ld -r', then the linker's
output is no longer valid for that mode. The relevant changes to
generic ELF code are:
commit 062189c6ea
Author: Ian Lance Taylor <ian@airs.com>
Date: Thu Nov 18 17:12:47 1993 +0000
and:
commit 6e07e54f1b
Author: Ian Lance Taylor <ian@airs.com>
Date: Thu Jan 6 20:01:42 1994 +0000
(split across two GIT commits likely due to repository conversion
peculiarities).
The `elf_backend_sym_is_global' hook however operates on BFD rather than
ELF symbols, making it unsuitable for the ELF linker as the linker does
not convert any symbol tables processed into the BFD format. Converting
the hook to operate on ELF symbols would in principle be possible, but
it would still require a considerable rewrite of `bfd_elf_final_link' to
adapt to the interface.
Therefore, especially given that no new use for the IRIX compatibility
mode is expected, minimize changes made to the ELF linker code and just
add an entirely new hook, and wire it in the o32 and n32 MIPS backends
accordingly; the n64 backend never uses the IRIX compatibility mode.
Since we have no coverage here at all add suitable GAS, LD and `objcopy'
test cases to the relevant testsuites to keep these tools consistently
verified.
bfd/
* elf-bfd.h (elf_backend_data): Add
`elf_backend_elfsym_local_is_section' member.
* elfxx-target.h (elf_backend_elfsym_local_is_section): New
macro.
(elfNN_bed): Add `elf_backend_elfsym_local_is_section' member.
* elflink.c (bfd_elf_final_link): Use it to determine whether
set the `.symtab' section's `sh_info' value to the index of the
first non-local or non-section symbol.
* elf32-mips.c (mips_elf32_elfsym_local_is_section): New
function.
(elf_backend_elfsym_local_is_section): New macro.
* elfn32-mips.c (mips_elf_n32_elfsym_local_is_section): New
function.
(elf_backend_elfsym_local_is_section): New macro.
binutils/
* testsuite/binutils-all/mips/global-local-symtab-o32.d: New
test.
* testsuite/binutils-all/mips/global-local-symtab-o32t.d: New
test.
* testsuite/binutils-all/mips/global-local-symtab-n32.d: New
test.
* testsuite/binutils-all/mips/global-local-symtab-n32t.d: New
test.
* testsuite/binutils-all/mips/global-local-symtab-n64.d: New
test.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* testsuite/gas/mips/global-local-symtab-o32.d: New test.
* testsuite/gas/mips/global-local-symtab-o32t.d: New test.
* testsuite/gas/mips/global-local-symtab-n32.d: New test.
* testsuite/gas/mips/global-local-symtab-n32t.d: New test.
* testsuite/gas/mips/global-local-symtab-n64.d: New test.
* testsuite/gas/mips/global-local-symtab.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/global-local-symtab-o32.d: New test.
* testsuite/ld-mips-elf/global-local-symtab-o32t.d: New test.
* testsuite/ld-mips-elf/global-local-symtab-n32.d: New test.
* testsuite/ld-mips-elf/global-local-symtab-n32t.d: New test.
* testsuite/ld-mips-elf/global-local-symtab-n64.d: New test.
* testsuite/ld-mips-elf/global-local-symtab.ld: New test linker
script.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
There is no need to check $pkg_cv_[]$1[]_LIBS works if package check
failed.
config/
PR binutils/26301
* pkg.m4 (PKG_CHECK_MODULES): Use AC_TRY_LINK only if
$pkg_failed = no.
binutils/
PR binutils/26301
* configure: Regenerated.
gdb/
PR binutils/26301
* configure: Regenerated.
It is quite normal to have headers without library on multilib OSes.
Add AC_TRY_LINK to PKG_CHECK_MODULES to check if $pkg_cv_[]$1[]_LIBS
works.
config/
PR binutils/26301
* pkg.m4 (PKG_CHECK_MODULES): Add AC_TRY_LINK to check if
$pkg_cv_[]$1[]_LIBS works.
binutils/
PR binutils/26301
* configure: Regenerated.
gdb/
PR binutils/26301
* configure: Regenerated.
"objdump -s -j .bss" results in a message that indicates objdump
couldn't find a .bss section when present. Fix that.
* objdump.c (dump_section): Don't return without calling
process_section_p.
The binutils testsuite supports involving LD in processing test cases
and with the MIPS target that has the same issues the LD testsuite does.
So to support LD in the MIPS part of the binutils testsuite similarly
to commit 86b24e15c4 ("MIPS/LD/testsuite: Correct comm-data.exp test
ABI/emul/endian arrangement") update the mips.exp test script to:
- correctly select emulations for targets using non-traditional MIPS
emulations,
- correctly select ABIs for targets that do not support all of them,
- use the default endianness selection where possible to benefit targets
that support only one,
- simplify test invocation by providing ABI-specific `run_dump_test'
wrappers, specifically `run_dump_test_o32', `run_dump_test_n32' and
`run_dump_test_n64', which remove the need to use conditionals across
the Expect script or to repeat ABI-specific GAS and LD flags with each
invocation,
borrowing changes from commit 78da84f994 ("MIPS/LD/testsuite: Correct
mips-elf.exp test ABI/emul/endian arrangement").
As a side effect this disables o32 ABI testing for targets that are not
supposed to support them and do not with LD, but still have such support
with BFD and GAS due to our inflexibility in configuration. Ultimately
we ought to support having o32 completely disabled.
binutils/
* testsuite/binutils-all/mips/mips.exp (run_dump_test_abi)
(run_dump_test_o32, run_dump_test_n32, run_dump_test_n64): New
procedures.
(has_newabi): Remove variable.
(has_abi, abi_asflags, abi_ldflags): New associative array
variables.
(irixemul): New variable.
Replace `run_dump_test' calls where applicable throughout with
`run_dump_test_o32', `run_dump_test_n32' and `run_dump_test_n64'
as appropriate. Use `noarch' for tests that require their own
architecture setting.
* testsuite/binutils-all/mips/mips-ase-1.d: Remove GAS flags.
* testsuite/binutils-all/mips/mips-ase-2.d: Likewise.
* testsuite/binutils-all/mips/mips-ase-3.d: Likewise.
* testsuite/binutils-all/mips/mips-note-2-n32.d: Likewise.
* testsuite/binutils-all/mips/mips-note-2-n64.d: Likewise.
* testsuite/binutils-all/mips/mips-note-2.d: Likewise.
* testsuite/binutils-all/mips/mips-note-2r-n32.d: Likewise.
* testsuite/binutils-all/mips/mips-note-2r-n64.d: Likewise.
* testsuite/binutils-all/mips/mips-note-2r.d: Likewise.
* testsuite/binutils-all/mips/mips-reginfo-n32.d: Likewise.
* testsuite/binutils-all/mips/mips-reginfo.d: Likewise.
* testsuite/binutils-all/mips/mips16-extend-noinsn.d: Likewise.
* testsuite/binutils-all/mips/mips16-pcrel.d: Likewise.
* testsuite/binutils-all/mips/mips16-alias.d: Remove `-32' from
GAS flags.
* testsuite/binutils-all/mips/mips16-extend-insn.d: Likewise.
* testsuite/binutils-all/mips/mips16-noalias.d: Likewise.
* testsuite/binutils-all/mips/mips16-undecoded.d: Likewise.
* testsuite/binutils-all/mips/mips16e2-extend-insn.d: Likewise.
* testsuite/binutils-all/mips/mips16e2-undecoded.d: Likewise.
* testsuite/binutils-all/mips/mixed-micromips.d: Likewise.
* testsuite/binutils-all/mips/mixed-mips16.d: Likewise.
The CTF assembler emitted by GCC has architecture-dependent pseudos in
it, and is (obviously) tightly tied to a particular set of C source
files with specific types in them. The CTF tests do run_dump_test on
some candidate input, link it using the run_dump_test ld machinery, and
compare objdump --ctf output. To avoid skew, we'd like to be able
to easily regenerate the .s being scanned so that the .c doesn't get
out of sync with it, but since GCC emits arch-dependent pseudos, we
are forced to hand-hack the output every time (quite severely on some
arches, like x86-32 and -64, where every single pseudo used is not only
arch-dependent but undocumented).
To avoid this, teach run_dump_test how to optionally compile things
given new, optional additional flags passed in in the cc option.
Only sources with the .c suffix are compiled, so there is no effect on
any existing tests. The .s files go into the tmpdir, from which
existing run_dump_test code picks them up as usual.
binutils/
* testsuite/lib/binutils-common.exp (run_dump_test): Add 'cc'
option.
The CTF objdumping code is adding linefeeds in calls to non_fatal, which
is wrong and looks ugly.
binutils/
* objdump.c (dump_ctf_archive_member): Remove linefeeds.
(dump_ctf): Likewise.
This commit adds a long-missing piece of infrastructure to libctf: the
ability to report errors and warnings using all the power of printf,
rather than being restricted to one errno value. Internally, libctf
calls ctf_err_warn() to add errors and warnings to a list: a new
iterator ctf_errwarning_next() then consumes this list one by one and
hands it to the caller, which can free it. New errors and warnings are
added until the list is consumed by the caller or the ctf_file_t is
closed, so you can dump them at intervals. The caller can of course
choose to print only those warnings it wants. (I am not sure whether we
want objdump, readelf or ld to print warnings or not: right now I'm
printing them, but maybe we only want to print errors? This entirely
depends on whether warnings are voluminous things describing e.g. the
inability to emit single types because of name clashes or something.
There are no users of this infrastructure yet, so it's hard to say.)
There is no internationalization here yet, but this at least adds a
place where internationalization can be added, to one of
ctf_errwarning_next or ctf_err_warn.
We also provide a new ctf_assert() function which uses this
infrastructure to provide non-fatal assertion failures while emitting an
assert-like string to the caller: to save space and avoid needlessly
duplicating unchanging strings, the assertion test is inlined but the
print-things-out failure case is not. All assertions in libctf will be
converted to use this machinery in future commits and propagate
assertion-failure errors up, so that the linker in particular cannot be
killed by libctf assertion failures when it could perfectly well just
print warnings and drop the CTF section.
include/
* ctf-api.h (ECTF_INTERNAL): Adjust error text.
(ctf_errwarning_next): New.
libctf/
* ctf-impl.h (ctf_assert): New.
(ctf_err_warning_t): Likewise.
(ctf_file_t) <ctf_errs_warnings>: Likewise.
(ctf_err_warn): New prototype.
(ctf_assert_fail_internal): Likewise.
* ctf-inlines.h (ctf_assert_internal): Likewise.
* ctf-open.c (ctf_file_close): Free ctf_errs_warnings.
* ctf-create.c (ctf_serialize): Copy it on serialization.
* ctf-subr.c (ctf_err_warn): New, add an error/warning.
(ctf_errwarning_next): New iterator, free and pass back
errors/warnings in succession.
* libctf.ver (ctf_errwarning_next): Add.
ld/
* ldlang.c (lang_ctf_errs_warnings): New, print CTF errors
and warnings. Assert when libctf asserts.
(lang_merge_ctf): Call it.
(land_write_ctf): Likewise.
binutils/
* objdump.c (ctf_archive_member): Print CTF errors and warnings.
* readelf.c (dump_ctf_archive_member): Likewise.
readelf * readelf.c (parse_args): Silence potential warnings about a
memory resource leak when allocating space for ctf option values.
(dump_section_as_ctf): Fix typo checking dump_ctf_strtab_name
variable.
libctf * ctf-archive.c (ctf_arc_write): Avoid calling close twice on the
same file descriptor.
ARC can use odd-even double register pairs in some selected
instructions. Although the GNU assembler doesn't allow even-odd
registers to be used, there may be cases when the disassembler is
presented with such situation. This patch add a test and detects such
cases.
opcodes/
2020-07-14 Claudiu Zissulescu <claziss@gmail.com>
* arc-dis.c (print_insn_arc): Detect and emit a warning when a
faulty double register pair is detected.
binutils/
2020-07-14 Claudiu Zissulescu <claziss@gmail.com>
* testsuite/binutils-all/arc/double_regs.s: New test.
* testsuite/binutils-all/arc/objdump.exp: Add the above test.
Signed-off-by: Claudiu Zissulescu <claziss@gmail.com>
Tests just having "xfail: x86_64-*-cygwin" aren't good, since
presumably if a test fails on x86_64-cygwin then it also fails on
x86_64-*-pe* and x86_64-*-mingw*.
binutils/
* testsuite/lib/binutils-common.exp (is_pecoff_format): Accept
optional machine-os arg.
ld/
* testsuite/ld-scripts/default-script1.d: Don't skip, xfail
using is_pecoff_format.
* testsuite/ld-scripts/default-script2.d: Likewise.
* testsuite/ld-scripts/default-script3.d: Likewise.
* testsuite/ld-scripts/default-script4.d: Likewise.
* testsuite/ld-scripts/pr20302.d: Remove x86_64-*-cygwin from notarget.
* testsuite/ld-scripts/provide-6.d: Remove x86_64-*-cygwin from xfail.
* testsuite/ld-scripts/provide-8.d: Likewise.
This one isn't just a weird corner case requiring multiple
.PARISC.unwind sections in an object file to trigger the buffer
overflow, it's also a simple bug that would prevent relocations being
applied in the normal case of a single .PARISC.unwind section.
* readelf (slurp_hppa_unwind_table): Set table_len before use
in relocation sanity checks.
and restrict some other tests using is_*_format.
* testsuite/binutils-all/ar.exp: Use is_xcoff_format.
* testsuite/binutils-all/nm.exp: Likewise.
* testsuite/binutils-all/copy-2.d: Run only for elf and pe targets.
* testsuite/binutils-all/copy-3.d: Run only for elf targets.
* testsuite/binutils-all/set-section-alignment.d: Likewise.
* testsuite/binutils-all/copy-4.d: Don't run for xcoff.
Avoid an UNRESOLVED test due to "Error: the XCOFF file format does not
support arbitrary sections".
* testsuite/lib/binutils-common.exp (is_xcoff_format): New.
* testsuite/binutils-all/objcopy.exp (pr25662): Exclude xcoff.
In older gcc, shadowing a function name with a local variable name is
flagged as an error, certainly a bug but which is usually worked
around in binutils:
gcc -DHAVE_CONFIG_H -I. -I$SRC/binutils -I. -I$SRC/binutils -I../bfd -I$SRC/binutils/../bfd -I$SRC/binutils/../include -DLOCALEDIR="\"/usr/local/share/locale\"" -Dbin_dummy_emulation=bin_vanilla_emulation -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Werror -I$SRC/binutils/../zlib -g -O2 -MT dwarf.o -MD -MP -MF $depbase.Tpo -c -o dwarf.o $SRC/binutils/dwarf.c &&\
mv -f $depbase.Tpo $depbase.Po
cc1: warnings being treated as errors
$SRC/binutils/dwarf.c: In function 'display_debug_str_offsets':
$SRC/binutils/dwarf.c:6913: error: declaration of 'index' shadows a global declaration
/usr/include/string.h:309: error: shadowed declaration is here
make[4]: *** [dwarf.o] Error 1
See also GCC PR c/53066. This is just another one that crept in since
I and others last had to use an old version. The name "idx" was used
in the preceding function, display_debug_addr. Also, it was declared
c99 style (after a statement in the block). Committed as obvious.
binutils:
* dwarf.c (display_debug_str_offsets): Rename local variable
index to idx. Move to top of function.
This tidies up in cases where fuzzed thin archives hit the error return
path in setup_nested_archive.
* elfcomm.c (setup_nested_archive): Set nested_arch->file to NULL
after freeing.
(release_archive): Set fields of arch to NULL after freeing.
objdump and readelf have one major CTF-related behavioural difference:
objdump can read .ctf sections that contain CTF archives and extract and
dump their members, while readelf cannot. Since the linker often emits
CTF archives, this means that readelf intermittently and (from the
user's perspective) randomly fails to read CTF in files that ld emits,
with a confusing error message wrongly claiming that the CTF content is
corrupt. This is purely because the archive-opening code in libctf was
needlessly tangled up with the BFD code, so readelf couldn't use it.
Here, we disentangle it, moving ctf_new_archive_internal from
ctf-open-bfd.c into ctf-archive.c and merging it with the helper
function in ctf-archive.c it was already using. We add a new public API
function ctf_arc_bufopen, that looks very like ctf_bufopen but returns
an archive given suitable section data rather than a ctf_file_t: the
archive is a ctf_archive_t, so it can be called on raw CTF dictionaries
(with no archive present) and will return a single-member synthetic
"archive".
There is a tiny lifetime tweak here: before now, the archive code could
assume that the symbol section in the ctf_archive_internal wrapper
structure was always owned by BFD if it was present and should always be
freed: now, the caller can pass one in via ctf_arc_bufopen, wihch has
the usual lifetime rules for such sections (caller frees): so we add an
extra field to track whether this is an internal call from ctf-open-bfd,
in which case we still free the symbol section.
include/
* ctf-api.h (ctf_arc_bufopen): New.
libctf/
* ctf-impl.h (ctf_new_archive_internal): Declare.
(ctf_arc_bufopen): Remove.
(ctf_archive_internal) <ctfi_free_symsect>: New.
* ctf-archive.c (ctf_arc_close): Use it.
(ctf_arc_bufopen): Fuse into...
(ctf_new_archive_internal): ... this, moved across from...
* ctf-open-bfd.c: ... here.
(ctf_bfdopen_ctfsect): Use ctf_arc_bufopen.
* libctf.ver: Add it.
binutils/
* readelf.c (dump_section_as_ctf): Support .ctf archives using
ctf_arc_bufopen. Automatically load the .ctf member of such
archives as the parent of all other members, unless specifically
overridden via --ctf-parent. Split out dumping code into...
(dump_ctf_archive_member): ... here, as in objdump, and call
it once per archive member.
(dump_ctf_indent_lines): Code style fix.
This unfortunately means conditionalizing out all the libctf code, but
the result is not too unbearably ugly, if a bit repetitive. I have
stubbed out code in the !ENABLE_LIBCTF path to avoid extra redundant
ifdefs where it seems that might be helpful. (The stubs are not too
disruptive, but I've tried to keep them on one line where possible to
avoid filling up the screen with stubs that nobody would care about.
If this is too much of a coding style violation I can change it.)
Changes since v2: use GCC_ENABLE rather than repeating all the
AC_ARG_ENABLE stuff over and over again.
ld/
* configure.ac [--enable-libctf]: New, default yes.
Set ENABLE_LIBCTF accordingly.
* Makefile.am [!ENABLE_LIBCTF]: Empty LIBCTF.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* ldlang.c (ctf_output): Conditionalize on ENABLE_LIBCTF.
(ldlang_open_ctf): Likewise.
(lang_merge_ctf): Likewise.
(ldlang_ctf_apply_strsym): Likewise.
(lang_write_ctf): Likewise.
(ldlang_write_ctf_late): Likewise.
(ldlang_open_ctf) [!ENABLE_LIBCTF]: Warn about the presence of CTF
sections.
(lang_merge_ctf) [!ENABLE_LIBCTF]: New stub.
(ldlang_ctf_apply_strsym) [!ENABLE_LIBCTF]: Likewise.
(lang_write_ctf) [!ENABLE_LIBCTF]: Likewise.
(ldlang_write_ctf_late) [!ENABLE_LIBCTF]: Likewise.
* ldelfgen.c (ldelf_emit_ctf_early): Conditionalize on
ENABLE_LIBCTF.
(struct ctf_strsym_iter_cb_arg): Likewise.
(ldelf_ctf_strtab_iter_cb): Likewise.
(ldelf_ctf_symbols_iter_cb): Likewise.
(ldelf_examine_strtab_for_ctf): Likewise.
(ldelf_emit_ctf_early) [!ENABLE_LIBCTF]: New stub.
(ldelf_examine_strtab_for_ctf) [!ENABLE_LIBCTF]: New stub.
binutils/
* configure.ac [--enable-libctf]: New, default yes.
Set ENABLE_LIBCTF accordingly.
* Makefile.am [!ENABLE_LIBCTF]: Empty LIBCTF and LIBCTF_NOBFD.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* objdump.c (usage): Conditionalize portions on ENABLE_LIBCTF.
(option_values): Likewise.
(long_options): Likewise.
(main): Likewise.
(dump_ctf_indent_lines): Conditionalize out when !ENABLE_LIBCTF.
(make_ctfsect): Likewise.
(dump_ctf_archive_member): Likewise.
(dump_ctf) [ENABLE_LIBCTF]: Likewise.
(dump_ctf) [!ENABLE_LIBCTF]: New empty stub.
* readelf.c (options): Conditionalize portions on ENABLE_LIBCTF.
(usage): Likewise.
(process_section_contents): Likewise.
(shdr_to_ctf_sect): Conditionalize out when !ENABLE_LIBCTF.
(dump_ctf_indent_lines): Likewise.
(dump_section_as_ctf) [ENABLE_LIBCTF]: Likewise.
Multiple -M options can be specified in any order. Therefore stright
assignment to fields affected needs to be avoided, such that earlier
options' effects won't be discarded. This was in particular a problem
for -Msuffix followed by certain of the other sub-options.
While updating documentation, take the liberty and also drop the
redundant mentioning of being able to comma-separate multiple options.
This patch adds GNU attribute support to m68k and utilises it to tag the
floating-point calling convention used (hard-float or soft-float). It enables
the linker to ensure linked objects use a consistent floating-point ABI and
allows tools like GDB to infer the ABI used from the ELF file. It is based on
similar work done for PowerPC.
bfd/
* elf32-m68k.c (m68k_elf_merge_obj_attributes): New function.
(elf32_m68k_merge_private_bfd_data): Merge GNU attributes.
binutils/
* readelf.c (display_m68k_gnu_attribute): New function.
(process_arch_specific): Call display_m68k_gnu_attribute for EM_68K.
gas/
* config/tc-m68k.c (m68k_elf_gnu_attribute): New function.
(md_pseudo_table): Handle "gnu_attribute".
* doc/as.texi: Document GNU attribute for M68K.
include/
* elf/m68k.h: Add enum for GNU object attribute with floating point
tag name and values.
ld/
* testsuite/ld-m68k/attr-gnu-4-0.s: New file.
* testsuite/ld-m68k/attr-gnu-4-1.s: Likewise.
* testsuite/ld-m68k/attr-gnu-4-2.s: Likewise.
* testsuite/ld-m68k/attr-gnu-4-00.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-01.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-02.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-10.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-11.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-12.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-20.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-21.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-22.d: Likewise.
* testsuite/ld-m68k/m68k.exp: Run the new tests.
PR 26160
* dwarf.c (fetch_indexed_string): Detect and handle old style
.debug_str_offset tables.
(display_debug_str_offsets): Likewise. Also add support for
.debug_str_offsets.dwo sections.
PR 26112
* dwarf.c (display_debug_str_offsets): Add code to display the
contents of the .debug_str_offsets section.
(display_debug_macro): Add support for DW_MACRO_define_strx and
DW_MACRO_undef_strx.
bfd
* mach-o.c: Support the new load commands by reading a linkedit data
command for them.
binutils
* od-macho.c: Dump linkedit data for new load commands.
include
* mach-o/loader.h: Add declarations of two new Mach-O load
commands.
ld silently accepts -z relro and -z norelro for targets that lack the
necessary GNU_RELRO support. This patch makes those targets emit a
warning instead, and adds testsuite infrastructure to detect when
relro is unsupported.
binutils/
* testsuite/config/default.exp (ld_elf_shared_opt): Don't set.
* testsuite/lib/binutils-common.exp (check_relro_support): New proc.
(run_dump_test): Use check_relro_support to decide whether to pass
extra ld option "-z norelro".
ld/
* emultempl/elf.em (gld${EMULATION_NAME}_handle_option): Omit
-z relro and -z norelro when target support for GNU_RELRO is lacking.
(gld${EMULATION_NAME}_before_parse): Ignore RELRO default too.
* emultempl/aarch64elf.em (gld${EMULATION_NAME}_before_parse): Ignore
RELRO default when target support for GNU_RELRO is lacking.
* emultempl/armelf.em (gld${EMULATION_NAME}_before_parse): Likewise.
* emultempl/linux.em (gld${EMULATION_NAME}_before_parse): Likewise.
* emultempl/scoreelf.em (gld${EMULATION_NAME}_before_parse): Likewise.
* testsuite/config/default.exp (ld_elf_shared_opt): Don't set.
* testsuite/ld-elf/pr16322.d: xfail when no relro support.
* testsuite/ld-elf/pr22393-1a.d: Likewise.
* testsuite/ld-elf/pr22393-1b.d: Likewise.
* testsuite/ld-elf/shared.exp (pr20995-2.so, pr20995-2): Likewise.
* testsuite/lib/ld-lib.exp (run_ld_link_tests): Use check_relro_support
to decide whether to pass extra ld option "-z norelro".
Let's do without that unnecessary internal option buffer. This also
fixes another bug in that the REGINFO data was being taken from the
calloc'd internal option buffer, so was all zeros.
* readelf.c (process_mips_specific): Don't alloc memory for
Elf_Internal_Options.
DT_MIPS_OPTIONS is not a regular array as assumed by readelf. This
patch corrects that assumption, and to do so easily, makes various
internal (host byte order) structs the same size as external (target
byte order) structs.
include/
* elf/mips.h (Elf32_RegInfo): Use fixed width integer types.
(Elf64_Internal_RegInfo, Elf_Internal_Options): Likewise.
binutils/
* readelf.c (process_mips_specific): Assert size of internal
types match size of external types, and simplify allocation of
internal buffer. Catch possible integer overflow when sanity
checking option size. Don't assume options are a regular array.
Sanity check reginfo option against option size. Use PRI macros
when printing.
* binutils/testsuite/binutils-all/pr25662-pdp11.s: Alternate source file
for test using section pseudo-ops compatible with pdp11.
* binutils/testsuite/binutils-all/objcopy.exp: Select alternate source.
This patch adds support for a new CGEN_OPEN_INSN_ENDIAN argument
for @arch@_cgen_cpu_open. This is useful for architectures in
which the endianness of the instruction words is not the same
than the endianness used for data.
An accompanying patch has been sent to the CGEN mailing list that
adds support for this argument on the CGEN side [1]. Its been
already pre-approved [2], and will be applied simultaneously with
this binutils series.
[1] https://sourceware.org/pipermail/cgen/2020q2/002733.html
[2] https://sourceware.org/pipermail/cgen/2020q2/002737.html
include/ChangeLog:
2020-06-04 Jose E. Marchesi <jemarch@gnu.org>
* opcode/cgen.h (enum cgen_cpu_open_arg): New value
CGEN_CPU_OPEN_INSN_ENDIAN.
opcodes/ChangeLog:
2020-06-04 Jose E. Marchesi <jemarch@gnu.org>
* cgen-dis.in (cpu_desc_list): New field `insn_endian'.
(print_insn_): Handle instruction endian.
* bpf-dis.c: Regenerate.
* bpf-desc.c: Regenerate.
* epiphany-dis.c: Likewise.
* epiphany-desc.c: Likewise.
* fr30-dis.c: Likewise.
* fr30-desc.c: Likewise.
* frv-dis.c: Likewise.
* frv-desc.c: Likewise.
* ip2k-dis.c: Likewise.
* ip2k-desc.c: Likewise.
* iq2000-dis.c: Likewise.
* iq2000-desc.c: Likewise.
* lm32-dis.c: Likewise.
* lm32-desc.c: Likewise.
* m32c-dis.c: Likewise.
* m32c-desc.c: Likewise.
* m32r-dis.c: Likewise.
* m32r-desc.c: Likewise.
* mep-dis.c: Likewise.
* mep-desc.c: Likewise.
* mt-dis.c: Likewise.
* mt-desc.c: Likewise.
* or1k-dis.c: Likewise.
* or1k-desc.c: Likewise.
* xc16x-dis.c: Likewise.
* xc16x-desc.c: Likewise.
* xstormy16-dis.c: Likewise.
* xstormy16-desc.c: Likewise.
binutils/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* objdump.c (disassemble_data): Set disasm_info.endian_code to
disasm_info.endian after the latter is initialized to the
endianness reported by BFD.
While a typedef can be specified in message files for the messages following
with the `MessageIdTypedef` directive, only the last typedef was honored by
windmc. This corrects this behavior, matching mc.exe functionality.
* windmc.h (struct mc_node): Add id_typecast field.
* mcparse.y (message): Initialise the id_typecast field.
* windmc.c (write_dbg): Use the id_typecast field as a parameter
when calling write_dbg_define.
(write_header): Likewise.
There are a number of targets that don't support thin archives (*),
and vms doesn't even support file name extensions other than .obj for
archives containing object files. This patch adjusts the testsuite
to cater for the vms restriction, and reenables testing for non-ELF
alpha targets. That adds a few alpha-dec-vms fails and one
alpha-linuxecoff fail but testsuite fails on those targets are nothing
new.
(*) It might seem like they do if binutils is built with
--enable-plugins but the plugin archive support is broken, causing the
wrong type of archives to be created by ar for those targets.
* testsuite/binutils-all/ar.exp (obj): Set up object file name
extension. Use throughout. Don't completely exclude non-ELF
alpha targets. Run long_filenames test for tic30. Exclude thin
archive tests for aix, ecoff and vms.
* estsuite/binutils-all/objdump.exp (obj): Set up object file name
extension. Use throughout. Don't exclude non-ELF alpha targets
from "bintest.a".
1. Remove the -mriscv-isa-version and --with-riscv-isa-version options.
We can still use -march to choose the version for each extensions, so there is
no need to add these.
2. Change the arguments of options from [1p9|1p9p1|...] to [1.9|1.9.1|...].
Unlike the architecture string has specified by spec, ther is no need to do
the same thing for options.
3. Spilt the patches to reduce the burdens of review.
[PATCH 3/7] RISC-V: Support new GAS options and configure options to set ISA versions
to
[PATCH v2 3/9] RISC-V: Support GAS option -misa-spec to set ISA versions
[PATCH v2 4/9] RISC-V: Support configure options to set ISA versions by default.
[PATCH 4/7] RISC-V: Support version checking for CSR according to privilege version.
to
[PATCH v2 5/9] RISC-V: Support version checking for CSR according to privilege spec version.
[PATCH v2 6/9] RISC-V: Support configure option to choose the privilege spec version.
4. Use enum class rather than string to compare the choosen ISA spec in opcodes/riscv-opc.c.
The behavior is same as comparing the choosen privilege spec.
include * opcode/riscv.h: Include "bfd.h" to support bfd_boolean.
(enum riscv_isa_spec_class): New enum class. All supported ISA spec
belong to one of the class
(struct riscv_ext_version): New structure holds version information
for the specific ISA.
* opcode/riscv-opc.h (DECLARE_CSR): There are two version information,
define_version and abort_version. The define_version means which
privilege spec is started to define the CSR, and the abort_version
means which privilege spec is started to abort the CSR. If the CSR is
valid for the newest spec, then the abort_version should be
PRIV_SPEC_CLASS_DRAFT.
(DECLARE_CSR_ALIAS): Same as DECLARE_CSR, but only for the obselete CSR.
* opcode/riscv.h (enum riscv_priv_spec_class): New enum class. Define
the current supported privilege spec versions.
(struct riscv_csr_extra): Add new fields to store more information
about the CSR. We use these information to find the suitable CSR
address when user choosing a specific privilege spec.
binutils * dwarf.c: Updated since DECLARE_CSR is changed.
opcodes * riscv-opc.c (riscv_ext_version_table): The table used to store
all information about the supported spec and the corresponding ISA
versions. Currently, only Zicsr is supported to verify the
correctness of Z sub extension settings. Others will be supported
in the future patches.
(struct isa_spec_t, isa_specs): List for all supported ISA spec
classes and the corresponding strings.
(riscv_get_isa_spec_class): New function. Get the corresponding ISA
spec class by giving a ISA spec string.
* riscv-opc.c (struct priv_spec_t): New structure.
(struct priv_spec_t priv_specs): List for all supported privilege spec
classes and the corresponding strings.
(riscv_get_priv_spec_class): New function. Get the corresponding
privilege spec class by giving a spec string.
(riscv_get_priv_spec_name): New function. Get the corresponding
privilege spec string by giving a CSR version class.
* riscv-dis.c: Updated since DECLARE_CSR is changed.
* riscv-dis.c: Add new disassembler option -Mpriv-spec to dump the CSR
according to the chosen version. Build a hash table riscv_csr_hash to
store the valid CSR for the chosen pirv verison. Dump the direct
CSR address rather than it's name if it is invalid.
(parse_riscv_dis_option_without_args): New function. Parse the options
without arguments.
(parse_riscv_dis_option): Call parse_riscv_dis_option_without_args to
parse the options without arguments first, and then handle the options
with arguments. Add the new option -Mpriv-spec, which has argument.
* riscv-dis.c (print_riscv_disassembler_options): Add description
about the new OBJDUMP option.
ld * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated
priv attributes according to the -mpriv-spec option.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-b.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise.
bfd * elfxx-riscv.h (riscv_parse_subset_t): Add new callback function
get_default_version. It is used to find the default version for
the specific extension.
* elfxx-riscv.c (riscv_parsing_subset_version): Remove the parameters
default_major_version and default_minor_version. Add new bfd_boolean
parameter *use_default_version. Set it to TRUE if we need to call
the callback rps->get_default_version to find the default version.
(riscv_parse_std_ext): Call rps->get_default_version if we fail to find
the default version in riscv_parsing_subset_version, and then call
riscv_add_subset to add the subset into subset list.
(riscv_parse_prefixed_ext): Likewise.
(riscv_std_z_ext_strtab): Support Zicsr extensions.
* elfnn-riscv.c (riscv_merge_std_ext): Use strcasecmp to compare the
strings rather than characters.
riscv_merge_arch_attr_info): The callback function get_default_version
is only needed for assembler, so set it to NULL int the linker.
* elfxx-riscv.c (riscv_estimate_digit): Remove the static.
* elfxx-riscv.h: Updated.
gas * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Updated.
* config/tc-riscv.c (default_arch_with_ext, default_isa_spec):
Static variables which are used to set the ISA extensions. You can
use -march (or ELF build attributes) and -misa-spec to set them,
respectively.
(ext_version_hash): The hash table used to handle the extensions
with versions.
(init_ext_version_hash): Initialize the ext_version_hash according
to riscv_ext_version_table.
(riscv_get_default_ext_version): The callback function of
riscv_parse_subset_t. According to the choosed ISA spec,
get the default version for the specific extension.
(riscv_set_arch): Set the callback function.
(enum options, struct option md_longopts): Add new option -misa-spec.
(md_parse_option): Do not call riscv_set_arch for -march. We will
call it later in riscv_after_parse_args. Call riscv_get_isa_spec_class
to set default_isa_spec class.
(riscv_after_parse_args): Call init_ext_version_hash to initialize the
ext_version_hash, and then call riscv_set_arch to set the architecture
with versions according to default_arch_with_ext.
* testsuite/gas/riscv/attribute-02.d: Set 0p0 as default version for
x extensions.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: New testcase. For i-ext, we
already set it's version to 2p1 by march, so no need to use the default
2p2 version. For m-ext, we do not set the version by -march and ELF arch
attribute, so set the default 2p0 to it. For zicsr, it is not defined in
ISA spec 2p2, so set 0p0 to it.
* testsuite/gas/riscv/attribute-10.d: New testcase. The version of
zicsr is 2p0 according to ISA spec 20191213.
* config/tc-riscv.c (DEFAULT_RISCV_ARCH_WITH_EXT)
(DEFAULT_RISCV_ISA_SPEC): Default configure option settings.
You can set them by configure options --with-arch and
--with-isa-spec, respectively.
(riscv_set_default_isa_spec): New function used to set the
default ISA spec.
(md_parse_option): Call riscv_set_default_isa_spec rather than
call riscv_get_isa_spec_class directly.
(riscv_after_parse_args): If the -isa-spec is not set, then we
set the default ISA spec according to DEFAULT_RISCV_ISA_SPEC by
calling riscv_set_default_isa_spec.
* testsuite/gas/riscv/attribute-01.d: Add -misa-spec=2.2, since
the --with-isa-spec may be set to different ISA spec.
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* configure.ac: Add configure options, --with-arch and
--with-isa-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (default_priv_spec): Static variable which is
used to check if the CSR is valid for the chosen privilege spec. You
can use -mpriv-spec to set it.
(enum reg_class): We now get the CSR address from csr_extra_hash rather
than reg_names_hash. Therefore, move RCLASS_CSR behind RCLASS_MAX.
(riscv_init_csr_hashes): Only need to initialize one hash table
csr_extra_hash.
(riscv_csr_class_check): Change the return type to void. Don't check
the ISA dependency if -mcsr-check isn't set.
(riscv_csr_version_check): New function. Check and find the CSR address
from csr_extra_hash, according to default_priv_spec. Report warning
for the invalid CSR if -mcsr-check is set.
(reg_csr_lookup_internal): Updated.
(reg_lookup_internal): Likewise.
(md_begin): Updated since DECLARE_CSR and DECLARE_CSR_ALIAS are changed.
(enum options, struct option md_longopts): Add new GAS option -mpriv-spec.
(md_parse_option): Call riscv_set_default_priv_version to set
default_priv_spec.
(riscv_after_parse_args): If -mpriv-spec isn't set, then set the default
privilege spec to the newest one.
(enum riscv_csr_class, struct riscv_csr_extra): Move them to
include/opcode/riscv.h.
* testsuite/gas/riscv/priv-reg-fail-fext.d: This test case just want
to check the ISA dependency for CSR, so fix the spec version by adding
-mpriv-spec=1.11.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise. There are some
version warnings for the test case.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.d: New test case.
Check whether the CSR is valid when privilege version 1.9 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: New test case.
Check whether the CSR is valid when privilege version 1.9.1 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.d: New test case.
Check whether the CSR is valid when privilege version 1.10 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.d: New test case.
Check whether the CSR is valid when privilege version 1.11 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Default configure option
setting. You can set it by configure option --with-priv-spec.
(riscv_set_default_priv_spec): New function used to set the default
privilege spec.
(md_parse_option): Call riscv_set_default_priv_spec rather than
call riscv_get_priv_spec_class directly.
(riscv_after_parse_args): If -mpriv-spec isn't set, then we set the
default privilege spec according to DEFAULT_RISCV_PRIV_SPEC by
calling riscv_set_default_priv_spec.
* testsuite/gas/riscv/csr-dw-regnums.d: Add -mpriv-spec=1.11, since
the --with-priv-spec may be set to different privilege spec.
* testsuite/gas/riscv/priv-reg.d: Likewise.
* configure.ac: Add configure option --with-priv-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (explicit_attr): Rename explicit_arch_attr to
explicit_attr. Set it to TRUE if any ELF attribute is found.
(riscv_set_default_priv_spec): Try to set the default_priv_spec if
the priv attributes are set.
(md_assemble): Set the default_priv_spec according to the priv
attributes when we start to assemble instruction.
(riscv_write_out_attrs): Rename riscv_write_out_arch_attr to
riscv_write_out_attrs. Update the arch and priv attributes. If we
don't set the corresponding ELF attributes, then try to output the
default ones.
(riscv_set_public_attributes): If any ELF attribute or -march-attr
options is set (explicit_attr is TRUE), then call riscv_write_out_attrs
to update the arch and priv attributes.
(s_riscv_attribute): Make sure all arch and priv attributes are set
before any instruction.
* testsuite/gas/riscv/attribute-01.d: Update the priv attributes if any
ELF attribute or -march-attr is set. If the priv attributes are not
set, then try to update them by the default setting (-mpriv-spec or
--with-priv-spec).
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* testsuite/gas/riscv/attribute-08.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: Likewise.
* testsuite/gas/riscv/attribute-10.d: Likewise.
* testsuite/gas/riscv/attribute-unknown.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise. Also, the priv spec
set by priv attributes must be supported.
* testsuite/gas/riscv/attribute-05.s: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Likewise. Updated
priv attributes according to the -mpriv-spec option.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg.d: Removed.
* testsuite/gas/riscv/priv-reg-version-1p9.d: New test case. Dump the
CSR according to the priv spec 1.9.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: New test case. Dump the
CSR according to the priv spec 1.9.1.
* testsuite/gas/riscv/priv-reg-version-1p10.d: New test case. Dump the
CSR according to the priv spec 1.10.
* testsuite/gas/riscv/priv-reg-version-1p11.d: New test case. Dump the
CSR according to the priv spec 1.11.
* config/tc-riscv.c (md_show_usage): Add descriptions about
the new GAS options.
* doc/c-riscv.texi: Likewise.
PR binutils/25809
* readelf.c (process_program_headers): Warn if the PT_DYNAMIC
segment doesn't match the .dynamic section and checks are
enabled.
(struct filedata): Add dynamic_symtab_section and
dynamic_strtab_section fields.
(process_section_headers): Set dynamic_symtab_section to the
.dynsym section. Set dynamic_strtab_section to the .dynstr
section.
(process_dynamic_section): Warn if the .dynsym section doesn't
match DT_SYMTAB and DT_SYMENT or the .dynstr section doesn't
DT_STRTAB and DT_STRSZ. But only if checks are enabled.
The ELF header contains a start address, which is also sometimes
called the entry address. The 'objdump -x' output calls this field
the 'start address', while readelf calls it 'entry point address'.
The linker talks about setting the 'entry' point in its manual.
I've always thought of this field as the 'entry address', and so when
I recently wanted to know if objcopy could adjust this field I opened
up the manual and searched for 'entry', which found no hits.
I thought it would be useful (for people like me) if the description
of 'set-start' and 'adjust-start' in the objcopy manual mentioned the
word 'entry' to make it easier to find.
binutils/ChangeLog:
* doc/binutils.texi: Mention 'entry address' in the set-start and
adjust-start options descriptions.
binutils* dwarf.c (do_checks): New global variable.
(display_formatted_table): Warn about an unexpected number of
columns in the table, if checks are enabled. Do not complain
about the lack of data following the number of entries in the
table if the table is empty.
(display_debug_lines_decoded): Only warn about an unexpected
number of columns in a table if checks are enabled.
* dwarf.h (do_checks): Add a prototype.
* elfcomm.c (error): Remove weak attribute.
(warn): Likewise.
* readelf.c (do_checks): Delete.
(warn): Delete.
(process_section_headers): Only warn about empty sections if
checks are enabled.
gas * dwarf2dbg.c (out_dir_and_file_list): Add comments describing the
construction of a DWARF-5 directory name table.
* testsuite/gas/elf/pr25917.d: Update expected output.
PR 25917
* dwarf.c (display_debug_lines_decoded): Warn if encountering a
supicious number of entries for DWARF-5 format directory and file
name tables. Do not display file name table header if the table
is empty. Do not allocate space for empty tables.
The zero scan is silly when the result isn't used.
* objdump.c (disassemble_bytes): Don't scan for zeros when
disassembling zeros. Translate "resuming at file offset" message.
Formatting. Replace some signed variables with unsigned.
* readelf.c (warn): New function - like elfcomm.c version but only
produces output if warnings are enabled.
(struct options): Add --lint and --enable-checks.
(usage): Add entry for --lint.
(parse_args): Handle -L. If checks are enabled but no dumps have
been selected then enable all dumps.
(process_section_headers): Replace long if-then-else sequence with
a switch. Add warning messages for empty SHT_REL, SHT_RELA and
SHT_PROGBITS sections.
(process_file): Do not complain if the file is an archive and lint
mode has been enabled.
* elfcomm.c (error): Make the function weak.
(warn): Likewise.
* NEWS: Mention the new feature.
* doc/binutils.texi: Document the new feature.
* dwarf.h (report_leb_status): Add file name and line number
parameters. Include them in the diagnostic output.
(READ_ULEB): Pass file and line number to report_leb_status.
(READ_SLEB): Likewise.
* dwarf.c (read_and_print_leb128): Pass file and line number to
report_leb_status.
* testsuite/binutils-all/readelf.exp: Add test of new feature.
* testsuite/binutils-all/zero-sec.s: New test source file.
* testsuite/binutils-all/zero-sec.r: Expected output from new
test.
This fixes another missing error check.
* readelf.c (get_num_dynamic_syms): Check DT_MIPS_XHASH was
read before dereferencing, and gracefully return. Remove
gnu_hash_error variable. Free gnu hash arrays if number of
syms found is zero.
This fixes some code that assumed only one PT_LOAD would contain
DT_SYMTAB. Which is normally the case, but fuzzers thoroughly mess
with object files.
* readelf.c (get_num_dynamic_syms): Check for nbuckets and nchains
non-zero.
(process_dynamic_section): Call get_num_dynamic_syms once rather
than in segment loop. Break out of segment loop on a successful
load of dynamic symbols. Formatting.
(process_object): Return error status from process_dynamic_section.
When a coredump is generated, there are a few registers in
ARC HS that are put under a special section, namely ".reg-v2".
It is for backward compatibility reasons with older tools that
we have decided not to extend the generic ".reg" section.
This patch makes it possible to display the information better
regarding that section. Compare the output of "readelf" without
and with these changes:
$ readelf -n core # without the patch
...
LINUX 0x0000000c Unknown note type: (0x00000600)
description data: 78 08 00 00 2f 6c 64 2d 75 43 6c 69
$ readelf -n core # with the patch
...
LINUX 0x0000000c NT_ARC_V2 (ARC HS accumulator/extra registers)
description data: 78 08 00 00 2f 6c 64 2d 75 43 6c 69
In another commit (soon to be submitted), GDB will makes use of these
changes to parse the extra section and its registers.
bfd/ChangeLog
2020-03-26 Anton Kolesov <anton.kolesov@synopsys.com>
* elf-bfd.h (elfcore_write_arc_v2): Add prototype.
* elf.c (elfcore_grok_arc_v2): New function.
(elfcore_grok_note): Call the new function to handle the corresponding
note.
(elfcore_write_arc_v2): New function.
(elfcore_write_register_note): Call the new function to handle the
corresponding pseudo-sections.
binutils/ChangeLog
2020-03-26 Anton Kolesov <anton.kolesov@synopsys.com>
* readelf.c (get_note_type): Handle NT_ARC_V2.
include/elf/ChangeLog
2020-03-26 Anton Kolesov <anton.kolesov@synopsys.com>
* common.h (NT_ARC_V2): New macro definitions.
Introduce new relaxations XTENSA_PDIFF{8,16,32} for positive differences
(subtracted symbol precedes diminished symbol) and XTENSA_NDIFF{8,16,32}
for negative differences (subtracted symbol follows diminished symbol).
Don't generate XTENSA_DIFF relocations in the assembler, generate
XTENSA_PDIFF or XTENSA_NDIFF based on relative symbol position.
Handle XTENSA_DIFF in BFD for compatibility with old object files.
Handle XTENSA_PDIFF and XTENSA_NDIFF in BFD, treating difference value
as unsigned.
2020-04-22 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* bfd-in2.h: Regenerated.
* elf32-xtensa.c (elf_howto_table): New entries for
R_XTENSA_PDIFF{8,16,32} and R_XTENSA_NDIFF{8,16,32}.
(elf_xtensa_reloc_type_lookup, elf_xtensa_do_reloc)
(relax_section): Add cases for R_XTENSA_PDIFF{8,16,32} and
R_XTENSA_NDIFF{8,16,32}.
* libbfd.h (bfd_reloc_code_real_names): Add names for
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32}.
* reloc.c: Add documentation for BFD_RELOC_XTENSA_PDIFF{8,16,32}
and BFD_RELOC_XTENSA_NDIFF{8,16,32}.
binutils/
* readelf.c (is_none_reloc): Recognize
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32}.
gas/
* config/tc-xtensa.c (md_apply_fix): Replace
BFD_RELOC_XTENSA_DIFF{8,16,32} generation with
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32} generation.
* testsuite/gas/xtensa/loc.d: Replace BFD_RELOC_XTENSA_DIFF16
with BFD_RELOC_XTENSA_PDIFF16 in the expected output.
include/
* elf/xtensa.h (elf_xtensa_reloc_type): New entries for
R_XTENSA_PDIFF{8,16,32} and R_XTENSA_NDIFF{8,16,32}.
ld/
* testsuite/ld-xtensa/relax-loc.d: New test definition.
* testsuite/ld-xtensa/relax-loc.s: New test source.
* testsuite/ld-xtensa/xtensa.exp (relax-loc): New test.
The idea here is to get rid of a lot of file related static vars used
to pass data around, in order to not have stale data about one object
file persisting to the next one.
* readelf.c (archive_file_offset, archive_file_size, dynamic_addr),
(dynamic_size, dynamic_nent, dynamic_strings, dynamic_strings_length),
(num_dynamic_syms, nbuckets, nchains, buckets, chains),
(ngnubuckets, gnubuckets, gnuchains, mipsxlat, ngnuchains),
(gnusymidx, dynamic_symbols, dynamic_syminfo, dynamic_syminfo_offset),
(dynamic_syminfo_nent, program_interpreter, dynamic_info),
(dynamic_info_DT_GNU_HASH, dynamic_info_DT_MIPS_XHASH, version_info),
(dynamic_section, symtab_shndx_list, group_count, section_groups),
(section_headers_groups): Move to struct filedata. Update use
throughout file.
Don't use a struct filedata for cmdline, which only needs two of the
filedata fields.
* readelf.c (struct dump_data): New, used..
(cmdline): ..here, and..
(struct filedata): ..here. Adjust all uses.
(request_dump_bynumber, request_dump, parse_args): Pass in a
struct dump_data* rather than Filedata*. Adjust callers.
(main): Don't set cmdline.file_name.
This is another one where not cleaning up sufficiently after
processing one file can lead to errors when processing the next file.
We have ngnuchains non-zero but gnuchains NULL in the following:
off < ngnuchains && (gnuchains[off] & 1) == 0
* readelf.c (process_symbol_table): Clear ngnuchains, ngnubuckets
and nbuckets.
This patch is aimed at fixing a number of oss-fuzz segfaults that
don't reproduce reliably with their current infrastructure, the
problem being that one invocation of readelf is effectively being run
on multiple object files. I believe that these segfaults could be
reliably reproduced with just two fuzzed objects being presented to
readelf, but those inputs are currently not identified by oss-fuzz.
So there is some guesswork involved in this patch. The idea here is
to clear stashed data such as symtab_shndx_list that is processed
using section header info, at the same time that header info is
cleared.
* readelf.c (process_section_headers): Free dynamic symbols etc.
earlier.
This fixes two leaks found in the new code supporting display of
dynamic symbols retrieved via dynamic tags.
* readelf.c (get_num_dynamic_syms): Formatting. Don't return
on error without freeing.
(process_dynamic_section): Don't recreate dynamic symbols from
dynamic tag info when the dynamic symbols have already been
read via section headers.
VDUP (neon) instructions can be conditional, but this is not taken into
account in the current master. This commit fixes that by i) fixing the
VDUP instruction masks and ii) adding logic for disassembling
conditional neon instructions.
opcodes * arm-dis.c (neon_opcodes): Fix VDUP instruction masks.
(print_insn_neon): Support disassembly of conditional
instructions.
binutils* testsuite/binutils-all/arm/vdup-cond.d: New test for testing that
conditional VDUP instructions are disassembled correctly.
* testsuite/binutils-all/arm/vdup-cond.s: New file used by
vdup-cond.d.
* testsuite/binutils-all/arm/vdup-thumb.d: New test for testing
that VDUP instructions (which are conditional in A32) can be
disassembled in thumb mode.
* testsuite/binutils-all/arm/vdup-cond.s: New file used by
vdup-thumb.d.
I find this useful when needing to compare compiler output, where the
address of the instruction and the value of symbols results in
unwanted differences.
* objdump.c (no_addresses): New static var.
(usage): Print help for --no-addresses.
(long_options): Add --no-addresses entry.
(objdump_print_addr_with_sym, objdump_print_addr): Omit symbol address.
(disassemble_bytes): Don't print current line address, or reloc
address.
* doc/binutils.texi: Document objdump --no-addresses.
When readelf is processing more than one file, static bss vars won't
start out as zero for the second file unless they are cleared.
* readelf.c (process_symbol_table): Zero gnubuckets, gnuchains
etc. after freeing.
When reconstructing dynamic symbol table from the PT_DYNAMIC segment,
compute dynamic symbol table size from hash table. For DT_HASH, the
number of dynamic symbol table entries equals the number of chains.
For DT_GNU_HASH/DT_MIPS_XHASH, only defined symbols with non-STB_LOCAL
indings are in hash table. Since DT_GNU_HASH/DT_MIPS_XHASH place all
symbols with STB_LOCAL binding before symbols with other bindings and
all undefined symbols defined ones in dynamic symbol table, the highest
symbol index in DT_GNU_HASH/DT_MIPS_XHASH is the highest dynamic symbol
table index.
Rewrite print_dynamic_symbol to dump dynamic symbol table for --dyn-syms
and --syms --use-dynamic.
binutils/
PR binutils/25707
* readelf.c (nbuckets): New.
(nchains): Likewise.
(buckets): Likewise.
(chains): Likewise.
(ngnubuckets): Likewise.
(gnubuckets): Likewise.
(gnuchains): Likewise.
(mipsxlat): Likewise.
(ngnuchains): Likewise.
(gnusymidx): Likewise.
(VALID_SYMBOL_NAME): Likewise.
(VALID_DYNAMIC_NAME): Use it.
(get_dynamic_data): Moved before process_dynamic_section.
(get_num_dynamic_syms): New function.
(process_dynamic_section): Use DT_SYMTAB, DT_SYMENT, DT_HASH,
DT_GNU_HASH and DT_MIPS_XHASH to reconstruct dynamic symbol
table. Use DT_STRTAB and DT_STRSZ to reconstruct dynamic string
table.
(get_symbol_index_type): Don't print "bad section index" when
there is no section header.
(print_dynamic_symbol): Rewrite.
(process_symbol_table): Call print_dynamic_symbol to dump dynamic
symbol table.
ld/
PR binutils/25707
* testsuite/ld-arm/armthumb-lib.sym: Updated.
* testsuite/ld-arm/farcall-mixed-app.sym: Likewise.
* testsuite/ld-arm/farcall-mixed-app2.sym: Likewise.
* testsuite/ld-arm/fdpic-main-m.sym: Likewise.
* testsuite/ld-arm/fdpic-main.sym: Likewise.
* testsuite/ld-arm/fdpic-shared-m.sym: Likewise.
* testsuite/ld-arm/fdpic-shared.sym: Likewise.
* testsuite/ld-arm/mixed-app.sym: Likewise.
* testsuite/ld-arm/mixed-lib.sym: Likewise.
* testsuite/ld-arm/preempt-app.sym: Likewise.
* testsuite/ld-elf/hash.d: Likewise.
* testsuite/ld-elf/pr13195.d: Likewise.
* testsuite/ld-elfvsb/hidden2.d: Likewise.
* testsuite/ld-mips-elf/hash2.d: Likewise.
A couple of ld ifunc tests currently FAIL on 64-bit Solaris/x86:
FAIL: ld-ifunc/ifunc-10-x86-64
FAIL: ld-ifunc/ifunc-11-x86-64
FAIL: ld-ifunc/ifunc-12-x86-64
FAIL: ld-ifunc/ifunc-13-x86-64
FAIL: ld-ifunc/ifunc-14a-x86-64
FAIL: ld-ifunc/ifunc-14b-x86-64
FAIL: ld-ifunc/ifunc-14c-x86-64
FAIL: ld-ifunc/ifunc-14d-x86-64
FAIL: ld-ifunc/ifunc-14e-x86-64
FAIL: ld-ifunc/ifunc-14f-x86-64
FAIL: ld-ifunc/ifunc-15-x86-64
FAIL: ld-ifunc/ifunc-17a-x86-64
FAIL: ld-ifunc/ifunc-17b-x86-64
FAIL: ld-ifunc/ifunc-2-local-x86-64-now
FAIL: ld-ifunc/ifunc-2-local-x86-64
FAIL: ld-ifunc/ifunc-2-x86-64-now
FAIL: ld-ifunc/ifunc-2-x86-64
FAIL: ld-ifunc/ifunc-20-x86-64
FAIL: ld-ifunc/pr17154-x86-64-now
FAIL: ld-ifunc/pr17154-x86-64
For one, the actual error is weird:
./ld-new: target elf64-x86-64 not found
failed with: <./ld-new: target elf64-x86-64 not found>, no expected output
FAIL: ld-ifunc/ifunc-10-x86-64
although ld -V does report the elf_x86_64 emulation as supported:
$ ./ld/ld-new -V
GNU ld (GNU Binutils) 2.34.50.20200328
Supported emulations:
elf_x86_64_sol2
elf_x86_64
[...]
When using ld -m elf_x86_64_sol2 instead, one of the testcases links
successfully.
However, there's no point in pursuing this: Solaris does not support
ifunc, as can be seen in <sys/elf.h>:
/*
* GNU/Linux specific symbol type not used by Solaris
*/
#define STT_GNU_IFUNC 10
and never will, given that it has symbol capabilities as solution to
effectively the same problem:
http://www.linker-aliens.org/blogs/rie/entry/symbol_capabilitie/
Therefore this patch disables ifunc testing on Solaris completely by
removing Solaris from binutils/testsuite/lib/binutils-common.exp
(supports_gnu_osabi). The ifunc part is justified above. SHF_GNU_MBIND is
in the OS-specific range and conflicts with
#define SHF_SUNW_REALLOC 0x01000000 /* internal: krtld realloc */
While the comment suggests this might be relocatable without too much
problems, the description of mbind (no formal spec AFAICS, just the
comment in the binutils patch submission) strongly suggests that this
isn't relevant to Solaris at all.
Indirectly, clearing supports_gnu_osabi on Solaris disables
supports_gnu_unique. Again, Solaris <sys/elf.h> has
/*
* GNU/Linux specific binding not used by Solaris
*/
#define STB_GNU_UNIQUE 10
so this seems the right thing to do.
Afterwards, one can remove the explicit mentions of *-*-solaris2* in
quite a number of (but not all) the ld-ifunc dump file notarget lists.
There's one fallout, though: two gas tests now XPASS because they are
xfail'ed for !supports_gnu_osabi:
XPASS: mbind sections 12
XPASS: mbind section contents 16
XPASS: mbind sections 16
XPASS: mbind section contents 16
To fix that, I've changed
#xfail: ![supports_gnu_osabi]
to notarget.
Tested on x86_64-pc-solaris2.11, i386-pc-solaris2.11,
x86_64-pc-linux-gnu, and i686-pc-linux-gnu.
ld:
* testsuite/ld-ifunc/ifunc-10-i386.d: Remove *-*-solaris2* from
notarget.
* ifunc-11-i386.d: Likewise.
* ifunc-12-i386.d: Likewise.
* ifunc-13-i386.d: Likewise.
* ifunc-14a-i386.d: Likewise.
* ifunc-14b-i386.d: Likewise.
* ifunc-14c-i386.d: Likewise.
* ifunc-14d-i386.d: Likewise.
* ifunc-14e-i386.d: Likewise.
* ifunc-14f-i386.d: Likewise.
* ifunc-15-i386.d: Likewise.
* ifunc-16-i386-now.d: Likewise.
* ifunc-16-i386.d: Likewise.
* ifunc-17a-i386.d: Likewise.
* ifunc-17b-i386.d: Likewise.
* ifunc-18a-i386.d: Likewise.
* ifunc-18b-i386.d: Likewise.
* ifunc-19a-i386.d: Likewise.
* ifunc-19b-i386.d: Likewise.
* ifunc-2-i386-now.d: Likewise.
* ifunc-2-i386.d: Likewise.
* ifunc-2-local-i386-now.d: Likewise.
* ifunc-2-local-i386.d: Likewise.
* ifunc-20-i386.d: Likewise.
* ifunc-21-i386.d: Likewise.
* ifunc-22-i386.d: Likewise.
* ifunc-5a-i386.d: Likewise.
* ifunc-5a-local-i386.d: Likewise.
* ifunc-5b-i386.d: Likewise.
* ifunc-5b-local-i386.d: Likewise.
* ifunc-5r-local-i386.d: Likewise.
* ifunc-6a-i386.d: Likewise.
* ifunc-6b-i386.d: Likewise.
* ifunc-7a-i386.d: Likewise.
* ifunc-7b-i386.d: Likewise.
* ifunc-8-i386.d: Likewise.
* ifunc-9-i386.d: Likewise.
* pr17154-i386-now.d: Likewise.
* pr17154-i386.d: Likewise.
* ifunc-23a-x86.d: Remove notarget.
* ifunc-24a-x86.d: Likewise.
* ifunc-25a-x86.d: Likewise.
gas:
* testsuite/gas/elf/section12a.d: Use notarget instead of xfail.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section16a.d: Likewise.
* testsuite/gas/elf/section16b.d: Likewise.
binutils:
* testsuite/lib/binutils-common.exp (supports_gnu_osabi): Don't
enable on *-*-solaris*.
PR binutils/pr25662
bfd * libcoff-in.h (struct pe_tdata): Rename the insert_timestamp
field to timestamp and make it an integer.
* libcoff.h: Regenerate.
* peXXigen.c (_bfd_XXi_only_swap_filehdr_out): Test the timestamp
field in the pe_data structure rather than the insert_timestamp
field.
binutils* objcopy.c (copy_object): When copying PE format files set the
timestamp field in the pe_data structure if the preserve_dates
flag is set.
* testsuite/binutils-all/objcopy.exp (objcopy_test) Use
--preserve-dates in place of the -p option, in order to make its
effect more obvious.
ld * emultempl/pe.em (after_open): Replace initialisation of the
insert_timestamp field in the pe_data structure with an
initialisation of the timestamp field.
* emultemp/pep.em: Likewise.
* pe-dll.c (fill_edata): Use the timestamp field in the pe_data
structure instead of the insert_timestamp field.
Last patch didn't manage to xfail spu due to clear_xfail *-*-*elf*.
Clearing *-*-*elf* dates back to a time when we had rather a lot more
setup_xfail patterns, so limiting it to hppa*-*-*elf*. Also,
mips-*-irix ought to have been mips-*-irix* and I'm having second
thoughts about xfailing mips and hiding what looks like a problem: If
the mips target is supposed to emit names for local section symbols
and does so for objcopy, why isn't it doing the same for ld? Also,
lots more mips targets would be subject to this test failing. So I'm
backing out those xfails and leaving it to someone more knowledgeable
about mips.
* testsuite/binutils-all/objcopy.exp (objcopy_test): Only
clear_xfail hppa*-*-*elf*. Revert mips xfails.
xfails spu due to a note section getting a different vma, and some
mips targets that give section symbols a name string. I added -p
for the executable test in an attempt to fix all the pe target fails,
but that doesn't preserve the date/time for some reason.
* testsuite/binutils-all/objcopy.exp (objcopy_test): Move xfails
from here to calls. Remove "m8*-*-*" entry. Don't xfail tic54x
but do xfail spu, mipstx39 and mips-sgi-irix for the executable
test. Pass "-p" to objcopy for the executable test.
binutils/ChangeLog:
2020-03-27 Jozef Lawrynowicz <jozef.l@mittosystems.com>
PR binutils/25662
* testsuite/binutils-all/objcopy.exp (objcopy_test): Add argument to
specify whether an object file or executable should be built and tested.
Change test names to report whether an object file or executable is
being tested.
* testsuite/binutils-all/pr25662.ld: New test.
* testsuite/binutils-all/pr25662.s: New test.
This patch fixes a leak of qualified_name caused by 4c83662712 and a
double free introduced by fd486f32d1. Not breaking out of the loop
results in an error: "failed to seek to next archive header". That's
slightly better than silently preventing the possibility of endless
loops.
* readelf.c (process_archive): Don't double free qualified_name.
Don't break out of loop with "negative" archive_file_size, just
set file offset to max.
With a crafted "negative" ar_hdr.ar_size it is possible to make
readelf loop. This patch catches the overflow in a file offset
calculation.
* readelf.c (process_archive): Prevent endless loop.
Extend _bfd_elf_get_symbol_version_string for nm -D to display symbol
version. _bfd_elf_get_symbol_version_name is added to avoid updating
all XXX_get_symbol_version_string functions.
bfd/
PR binutils/25708
* elf-bfd.h (_bfd_elf_get_symbol_version_name): New.
* elf.c (_bfd_elf_get_symbol_version_name): New function. Based
on the previous _bfd_elf_get_symbol_version_string.
(_bfd_elf_get_symbol_version_string): Use it.
binutils/
PR binutils/25708
* nm.c (SYM_NAME): Removed.
(print_symname): Add a pointer to struct extended_symbol_info
argument. Call _bfd_elf_get_symbol_version_name to get symbol
version.
(print_symdef_entry): Pass NULL to print_symname.
(print_symbol_info_bsd): Update call to print_symname.
(print_symbol_info_sysv): Likewise.
(print_symbol_info_posix): Likewise.
ld/
PR binutils/25708
* testsuite/ld-elf/pr25708.d: New file.
