* mips-opc.c (M3D): Tweak comment.
(mips_builtin_op): Add comment indicating that opcodes of the
same name must be placed together in the table, and sort
the "recip.fmt", "recip1.fmt", "recip2.fmt", "rsqrt.fmt",
"rsqrt1.fmt", and "rsqrt2.fmt" opcodes by name.
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* config/tc-mips.c (mips_set_options): New "ase_mips3d" member.
(mips_opts): Initialize "ase_mips3d" member.
(file_ase_mips3d): New variable.
(CPU_HAS_MIPS3D): New macro.
(md_begin): Initialize mips_opts.ase_mips3d and file_ase_mips3d
based on command line options and configuration defaults.
(macro_build, mips_ip): Accept MIPS-3D instructions if
mips_opts.ase_mips3d is set.
(OPTION_MIPS3D, OPTION_NO_MIPS3D, md_longopts, md_parse_option):
Add support for "-mips3d" and "-no-mips3d" options.
(OPTION_ELF_BASE): Move to accomodate new options.
(s_mipsset): Support ".set mips3d" and ".set nomips3d".
(mips_elf_final_processing): Add a comment indicating that a
MIPS-3D ASE ELF header flag should be set, when one exists.
* doc/as.texinfo: Document -mips3d and -no-mips3d options.
* doc/c-mips.texi: Likewise, and document ".set mips3d" and ".set
nomips3d" directives.
[ gas/testsuite/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* gas/mips/mips64-mips3d.s: New file.
* gas/mips/mips64-mips3d.d: Likewise.
* gas/mips/mips.exp: Run new "mips64-mips3d" test.
[ include/opcode/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* mips.h (INSN_MIPS3D): New definition used to mark MIPS-3D
instructions.
(OPCODE_IS_MEMBER): Adjust comments to indicate that ASE bit masks
may be passed along with the ISA bitmask.
[ opcodes/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_isa_type): Add MIPS3D instructions to the ISA
bit masks for bfd_mach_mips_sb1 and bfd_mach_mipsisa64. Add
comments for bfd_mach_mipsisa32 and bfd_mach_mipsisa64 that
indicate that they should dissassemble all applicable
MIPS-specified ASEs.
* mips-opc.c: Add support for MIPS-3D instructions.
(M3D): New definition.
* mips-opc.c: Update copyright years.
for float opcodes that take float operands. Add alternate
names (xxxD vs. xxxF) for float opcodes.
* pdp11-dis.c (print_operand): Clean up formatting for mode 67.
(print_foperand): New function to handle float opcode operands.
(print_insn_pdp11): Use print_foperand to disassemble float ops.
* ppc-opc.c (insert_bdm): Correct description of "at" branch
hints. Test PPC_OPCODE_POWER4 to determine branch hint flavour.
(extract_bdm, insert_bdp, extract_bdp, valid_bo): Likewise.
(BOFM64, BOFP64, BOTM64, BOFP64): Rename to BOFM4, BOFP4 etc.
(BODNZM64, BODNZP64, BODZM64, BODZP64): Likewise.
(PPCCOM32, PPCCOM64): Delete.
(NOPOWER4, POWER4): Define.
(powerpc_opcodes): Replace occurences of PPCCOM32 with NOPOWER4,
and PPCCOM4 with POWER4 so that "at" style branch hint opcodes
are enabled for power4 rather than ppc64.
2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
* sh64-opc.c: Regenerate.
2001-03-13 DJ Delorie <dj@redhat.com>
* sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
purpose is more obvious.
* sh64-opc.c (shmedia_table): Ditto.
* sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
(print_insn_shmedia): Ditto.
2001-03-12 DJ Delorie <dj@redhat.com>
* sh64-opc.c: Adjust comments to reflect reality: replace bits
3:0 with zeros (not "reserved"), replace "rrrrrr" with
"gggggg" for two-operand floating point opcodes. Remove
"fsina".
2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
Correct printing of .byte:s. Return number of printed bytes or
-1; never 0.
(print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
to next four-byte-alignment if insn or data is not aligned.
2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c: Update comments and fix comment formatting.
(initialize_shmedia_opcode_mask_table) <case A_IMMM>:
Abort instead of setting length to 0.
(crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
crange_bsearch_cmpl, sh64_get_contents_type,
sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.c: Remove #if 0:d entries for instructions not found in
SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
address with same prefix as SHcompact.
In the disassembler, use a .cranges section for linked executables.
* sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
and update for using structure in info->private_data.
(struct sh64_disassemble_info): New.
(is_shmedia_p): Delete.
(crange_qsort_cmpb): New function.
(crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
(crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
(init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
(sh64_get_contents_type, sh64_address_is_shmedia): New functions.
(print_insn_shmedia): Correct displaying of address after MOVI/SHORI
pair. Display addresses for linked executables only.
(print_insn_sh64x_media): Initialize info->private_data by calling
init_sh64_disasm_info.
(print_insn_sh64x): Ditto. Find out type of contents by calling
sh64_contents_type_disasm. Display data regions using ".long" and
".byte" similar to unrecognized opcodes.
2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
information in section flags before considering symbols. Don't
assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
* configure.in (bfd_sh_arch): Check presence of sh64 insns by
matching $target $canon_targets instead of looking at the
now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
* configure: Regenerate.
2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.c (shmedia_creg_table): New.
* sh64-opc.h (shmedia_creg_info): New type.
(shmedia_creg_table): Declare.
* sh64-dis.c (creg_name): New function.
(print_insn_shmedia): Use it.
* disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
bfd_mach_sh5 to print_insn_sh64 if big-endian and to
print_insn_sh64l if little-endian.
* sh64-dis.c (print_insn_shmedia): Make r unsigned.
(print_insn_sh64l): New.
(print_insn_sh64x): New.
(print_insn_sh64x_media): New.
(print_insn_sh64): Break out code to print_insn_sh64x and
print_insn_sh64x_media.
2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
* sh64-opc.h: New file
* sh64-opc.c: New file
* sh64-dis.c: New file
* Makefile.am: Add sh64 targets.
(HFILES): Add sh64-opc.h.
(CFILES): Add sh64-opc.c and sh64-dis.c.
(ALL_MACHINES): Add sh64 files.
* Makefile.in: Regenerate.
* configure.in: Add support for sh64 to bfd_sh_arch.
* configure: Regenerate.
* disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
(disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
print_insn_sh64.
* sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
* po/POTFILES.in: Regenerate.
* po/opcodes.pot: Regenerate.
[includes]
2002-02-04 Frank Ch. Eigler <fche@redhat.com>
* dis-asm.h (disassemble_info): New field `insn_sets'.
(INIT_DISASSEMBLE_INFO): Clear it.
[opcodes]
2002-02-04 Frank Ch. Eigler <fche@redhat.com>
* cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
From Steve Ellcey <sje@cup.hp.com>:
* libtool.m4 (HPUX_IA64_MODE): Set to 32 or 64 based on ABI.
(lt_cv_deplibs_check_method, lt_cv_file_magic_cmd,
lt_cv_file_magic_test_file): Set to appropriate values for HP-UX
IA64.
* ltcf-c.sh (archive_cmds, hardcode_*): Ditto.
* ltconfig (shlibpath_*, dynamic_linker, library_names_spec,
soname_spec, sys_lib_search_path_spec): Ditto.
Various configure scripts regenerated.
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
Corinna Vinschen <vinschen@redhat.com>
* Makefile.am: Add support for xstormy16.
* archures.c: Add support for xstormy16.
* config.bfd: Add support for xstormy16.
* configure.in: Add support for xstormy16.
* reloc.c: Add support for xstormy16.
* targets.c: Add support for xstormy16.
* cpu-xstormy16.c: New file.
* elf32-xstormy16.c: New file.
* Makefile.in: Regenerated.
* bfd-in2.h: Regenerated.
* configure: Regenerated.
* libbfd.h: Regenerated.
Index: binutils/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* readelf.c (guess_is_rela): Add support for stormy16.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
Index: gas/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* configure.in: Add support for xstormy16.
* configure: Regenerated.
* Makefile.am: Add support for xstormy16.
* Makefile.in: Regenerated.
* config/tc-xstormy16.c: New file.
* config/tc-xstormy16.h: New file.
Index: gas/testsuite/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
matthew green <mrg@redhat.com>
* gas/xstormy16/allinsn.d: New file.
* gas/xstormy16/allinsn.exp: New file.
* gas/xstormy16/allinsn.s: New file.
* gas/xstormy16/allinsn.sh: New file.
* gas/xstormy16/gcc.d: New file.
* gas/xstormy16/gcc.s: New file.
* gas/xstormy16/gcc.sh: New file.
* gas/xstormy16/reloc-1.d: New file.
* gas/xstormy16/reloc-1.s: New file.
* gas/xstormy16/reloc-2.d: New file.
* gas/xstormy16/reloc-2.s: New file.
Index: ld/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* Makefile.am: Add support for xstormy16.
* configure.tgt: Add support for xstormy16.
* Makefile.in: Regenerate.
* emulparams/elf32xstormy16.sh: New file.
* scripttempl/xstormy16.sc: New file.
Index: opcodes/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* Makefile.am: Add support for xstormy16.
* Makefile.in: Regenerate.
* configure.in: Add support for xstormy16.
* configure: Regenerate.
* disassemble.c: Add support for xstormy16.
* xstormy16-asm.c: New generated file.
* xstormy16-desc.c: New generated file.
* xstormy16-desc.h: New generated file.
* xstormy16-dis.c: New generated file.
* xstormy16-ibld.c: New generated file.
* xstormy16-opc.c: New generated file.
* xstormy16-opc.h: New generated file.
Index: include/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* dis-asm.h (print_insn_xstormy16): Declare.
Index: include/elf/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* common.h (EM_XSTORMY16): Define.
* xstormy16.h: New file.
* doc/binutils.texi (objdump): Document x86 -M options.
include/ChangeLog
* dis-asm.h (print_insn_i386): Declare.
opcodes/ChangeLog
* disassemble.c (disassembler): Call print_insn_i386.
* i386-dis.c (SUFFIX_ALWAYS): Define.
(struct dis_private): Add orig_sizeflag.
(print_insn_i386): Make it a wrapper, calling..
(print_insn): ..The old body of print_insn_i386. Avoid longjmp
warning without using volatile by moving orig_sizeflag to priv,
and removing inbuf. Parse disassembler_options.
(print_insn_i386_att, print_insn_i386_intel): Move initialisation
code to print_insn.
(putop): Remove #ifdef SUFFIX_ALWAYS.
accept WordReg.
* i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
category instead of Ew.
2001-10-21 Chris Demetriou <cgd@broadcom.com>
* mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
"bltzall" as writing GPR 31 (since they do).
* mips-dis.c (print_insn_arg): Calculate info->target
where appropriate.
(print_insn_mips): Fill in instruction info.
(print_mips16_insn_arg): Remove unneded variable 'val'.
Removed duplicated instruction target calculations,
calculate once and print that result. Use same idiom for
masking the jump segment bits as is used in print_insn_arg.
[gas/testsuite/ChangeLog]
2001-10-21 Chris Demetriou <cgd@broadcom.com>
* gas/mips/beq.s: Add zero words at end of instructions so
that objdump will print "..." when disassembling.
* gas/mips/beq.d: Update for disassembler changes which force
branch delay-slot nops to be printed.
* gas/mips/bge.d: Ditto.
* gas/mips/bgeu.d: Ditto.
* gas/mips/blt.d: Ditto.
* gas/mips/bltu.d: Ditto.
* gas/mips/jal-svr4pic.d: Ditto.
* gas/mips/jal-xgot.d: Ditto.
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* gas/mips/mips.exp (sb1-ext-ps): New test to test
SB-1 core's paired-single extensions to the MIPS64 ISA.
* gas/mips/sb1-ext-ps.d: New file.
* gas/mips/sb1-ext-ps.s: New file.
[include/opcode/ChangeLog]
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* mips.h (INSN_SB1): New cpu-specific instruction bit.
(OPCODE_IS_MEMBER): Allow instructions matching INSN_SB1
if cpu is CPU_SB1.
[opcodes/ChangeLog]
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_isa_type): Make the ISA used to disassemble
SB-1 binaries include instructions specific to the SB-1.
* mips-opc.c (SB1): New definition.
(mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
"recip.ps", "rsqrt.ps", and "sqrt.ps".
* gas/ppc/booke.s (rfci, wrtee, wrteei, mfdcrx, mfdcr, mtdcrx,
mtdcr, msync, dcba, mbar): New BookE tests.
* gas/ppc/booke.d: Update for new BookE tests.
[opcodes/ChangeLog]
* ppc-opc.c (MO): New macro for MO field of mbar instruction.
(powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
* config/tc-ppc.c (md_parse_option): New -m7410, -m7450 and -m7455
flags, equivalent to -m7400. New -maltivec to enable AltiVec
instructions. New -mbook64 and -mbooke/-mbooke32 flags to enable
64-bit and 32-bit BookE support, respectively. Change -m403 and
-m405 to set PPC403 option.
(md_show_usage): Adjust for new options.
* doc/all.texi: Set PPC.
* doc/as.texinfo: Add PPC support and pull in c-ppc.texi.
* doc/c-ppc.texi: New file.
* doc/Makefile.am (CPU_DOCS): Add c-ppc.texi.
* doc/Makefile.in: Regenerate.
[gas/testsuite/ChangeLog]
* gas/ppc/booke.s: New test for Motorola BookE.
* gas/ppc/booke.d: New file.
* gas/ppc/ppc.exp: Test booke.s.
[include/opcode/ChangeLog]
* ppc.h (PPC_OPCODE_BOOKE, PPC_OPCODE_403): New opcode flags for
BookE and PowerPC403 instructions.
[opcodes/ChangeLog]
* ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
instruction field instruction/extraction functions for new BookE
DE form instructions.
(CT): New macro for CT field in an X form instruction.
(DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
instructions.
(PPC64): Don't include PPC_OPCODE_PPC.
(403): New opcode macro for PPC403 processors.
(BOOKE): New opcode macro for BookE processors.
(bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
(bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
(dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
(stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
(mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
(subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
(subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
(addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
(lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
(stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
(tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
(lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
(stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
(lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
* ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
for a disassembler option of `booke', `booke32' or `booke64' to enable
BookE support in the disassembler.
* cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
calls to cgen_get_insn_value and cgen_put_insn_value calls.
(extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
Jason Eckhardt <jle@redhat.com>
* mips-dis.c: Add support for bfd_mach_mipsisa32 and
bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
bfd_mach_mips64.
(LS): Define.
(insert_ds): Complain if not a multiple of 4.
(XSYNC): Define.
(XSYNC_MASK): Define.
(powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
"slbmfee". Modify "sync" to use XSYNC_MASK and LS.
* cgen-asm.in: Include "xregex.h" always to enable the libiberty
regex support.
(@arch@_cgen_build_insn_regex): New routine from Graydon.
(@arch@_cgen_assemble_insn): Add Graydon's code to use regex
to verify if it is worth parsing the insn as insn "x". Also update
error message when insn is not a recognized format of the insn vs
when the insn is completely unrecognized.
* i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
(OP_J): Use bfd_vma for mask to work properly with 64 bits.
(op_address,op_riprel): Use bfd_vma to handle 64 bits.
2001-06-13 Geoffrey Keating <geoffk@redhat.com>
* cgen-asm.c (cgen_parse_keyword): When looking for the
boundaries of a keyword, allow any special characters
that are actually in one of the allowed keyword.
* cgen-opc.c (cgen_keyword_add): Add any special characters
to the nonalpha_chars field.
Index: cgen/ChangeLog
2001-06-13 Geoffrey Keating <geoffk@redhat.com>
* desc.scm (<keyword> 'gen-defn): Add extra zero into
CGEN_KEYWORD_ENTRY initializers.
Index: include/opcode/ChangeLog
2001-06-13 Geoffrey Keating <geoffk@redhat.com>
* cgen.h (cgen_keyword): Add nonalpha_chars field.
(cond_jump_mode, loop_jcxz_mode): Define.
(dis386_att): Add cond_jump_flag and loop_jcxz_flag as
appropriate, and 'F' suffix to loop insns.
(disx86_64_att): Likewise.
(dis386_twobyte_att): Likewise.
(print_insn_i386): Don't output addr prefix for loop, jcxz insns.
Output data size prefix for long conditional jumps. Output cs and
ds branch hints.
(putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
(OP_J): Don't make PREFIX_DATA used.
(need_modrm): Give it file scope.
(MODRM_CHECK): Define.
(dofloat): Use MODRM_CHECK.
(OP_E): Likewise.
(OP_EM): Likewise.
(OP_EX): Likewise.
and fix testsuite yet again now that we are getting correct disassembly.
[opcodes/ChangeLog]
2001-05-07 Frank Ch. Eigler <fche@redhat.com>
* cgen-dis.in (default_print_insn): Tolerate min<base instructions
even at end of a section.
* cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
by ignoring precariously-unpacked insn_value in favor of raw buffer.
[cgen/ChangeLog]
2001-05-07 Frank Ch. Eigler <fche@redhat.com>
* iformat.scm (compute-insn-base-mask-length): Rewrite to tolerate
various-base-length instruction sets.
2001-05-04 Frank Ch. Eigler <fche@redhat.com>
* m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
2001-05-04 Frank Ch. Eigler <fche@redhat.com>
* cgen-dis.in (print_insn): Remove call to read_insn. Instead,
assume incoming buffer already has the base insn loaded. Handle
case of smaller-than-base instructions for variable-length case.
* cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
* cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
to allay a compiler warning.
* ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
notestr if larger than xsect.
(in_class): Handle format M5.
* ia64-asmtab.c: Regnerate.
