(struct eh_frame_hdr_info): Add last_cie_inf, remove last_cie_offset.
* elf-eh-frame.c (_bfd_elf_discard_section_eh_frame): Delete code
setting offsets for removed CIEs. Don't set "sec", instead set
cie_inf for FDEs. Keep a pointer to last struct eh_cie_fde for a
CIE in hdr_info. Only set make_relative and make_lsda_relative
for CIEs. Use pointers rather than array indices.
(_bfd_elf_eh_frame_section_offset): Test/set make_relative,
make_lsda_relative, need_* on cie_inf for FDEs.
(_bfd_elf_write_section_eh_frame): Adjust offset and new_offset for
section output_offset. Delete cie_offset, instead use cie_inf
pointer to CIE entry. Use need_relative and need_lsda_relative on
CIE entry for FDEs. Use pointers rather than array indices.
* config.bfd: Include 64-bit support for i[3-7]86-*-solaris2*.
* elf64-x86-64.c (elf64_x86_64_section_from_shdr): New function.
(elf_backend_section_from_shdr): Define.
binutils/
* readelf.c (get_x86_64_section_type_name): New function.
(get_section_type_name): Use it.
gas/
* config/tc-i386.c: Include "elf/x86-64.h".
(i386_elf_section_type): New function.
* config/tc-i386.h (md_elf_section_type): Define.
(i386_elf_section_type): New prototype.
gas/testsuite/
* gas/i386/i386.exp: Don't run divide test for targets where '/'
is a comment. Run x86-64-unwind for 64-bit ELF targets.
* gas/i386/x86-64-unwind.d, gas/i386/x86-64-unwind.s: New.
include/
* elf/common.h (PT_SUNW_EH_FRAME): Define.
* elf/x86-64.h (SHT_X86_64_UNWIND): Define.
ld/
* configure.tgt: Include elf_x86_64 for i[3-7]86-*-solaris2*.
* elf32-xtensa.c (elf32xtensa_size_opt): New global variable.
(xtensa_default_isa): Global variable moved here from xtensa-isa.c.
(elf32xtensa_no_literal_movement): New global variable.
(elf_howto_table): Add entries for new relocations.
(elf_xtensa_reloc_type_lookup): Handle new relocations.
(property_table_compare): When addresses are equal, compare sizes and
various property flags.
(property_table_matches): New.
(xtensa_read_table_entries): Extend to read new property tables. Add
output_addr parameter to indicate that output addresses should be used.
Use bfd_get_section_limit.
(elf_xtensa_find_property_entry): New.
(elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry.
(elf_xtensa_check_relocs): Handle new relocations.
(elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new
relocations. Use new xtensa-isa.h functions.
(build_encoding_error_message): Remove encode_result parameter. Add
new target_address parameter used to detect alignment errors.
(elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up
error handling. Use new is_operand_relocation function.
(elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data):
Use underbar macro for error messages. Formatting.
(get_const16_opcode): New.
(get_l32r_opcode): Add a separate flag for initialization.
(get_relocation_opnd): Operand number is no longer explicit in the
relocation. Change to decode the opcode and analyze its operands.
(get_relocation_slot): New.
(get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit.
Use new xtensa-isa.h functions to handle multislot instructions.
(is_l32r_relocation): Add bfd parameter. Use is_operand_relocation.
(get_asm_simplify_size, is_alt_relocation, is_operand_relocation,
insn_decode_len, insn_decode_opcode, check_branch_target_aligned,
check_loop_aligned, check_branch_target_aligned_address, narrowable,
widenable, narrow_instruction, widen_instruction, op_single_fmt_table,
get_single_format, init_op_single_format_table): New.
(elf_xtensa_do_asm_simplify): Add error_message parameter and use it
instead of calling _bfd_error_handler. Use new xtensa-isa.h functions.
(contract_asm_expansion): Add error_message parameter and pass it to
elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation
with R_XTENSA_SLOT0_OP.
(get_expanded_call_opcode): Extend to handle either L32R or CONST16
instructions. Use new xtensa-isa.h functions.
(r_reloc struct): Add new virtual_offset field.
(r_reloc_init): Add contents and content_length parameters. Set
virtual_offset field to zero. Add contents to target_offset field for
partial_inplace relocations.
(r_reloc_is_defined): Check for null.
(print_r_reloc): New debug function.
(source_reloc struct): Replace xtensa_operand field with pair of the
opcode and the operand position. Add is_abs_literal field.
(init_source_reloc): Specify operand by opcode/position pair. Set
is_abs_literal field.
(source_reloc_compare): When target_offsets are equal, compare other
fields to make sorting predictable.
(literal_value struct): Add is_abs_literal field.
(value_map_hash_table struct): Add has_last_loc and last_loc fields.
(init_literal_value): New.
(is_same_value): Replace with ...
(literal_value_equal): ... this function. Add comparisons of
virtual_offset and is_abs_literal fields.
(value_map_hash_table_init): Use bfd_zmalloc. Check for allocation
failure. Initialize has_last_loc field.
(value_map_hash_table_delete): New.
(hash_literal_value): Rename to ...
(literal_value_hash): ... this. Include is_abs_literal flag and
virtual_offset field in the hash value.
(get_cached_value): Rename to ...
(value_map_get_cached_value): ... this. Update calls to
literal_value_hash and literal_value_equal.
(add_value_map): Check for allocation failure. Update calls to
value_map_get_cached_value and literal_value_hash.
(text_action, text_action_list, text_action_t): New types.
(find_fill_action, compute_removed_action_diff, adjust_fill_action,
text_action_add, text_action_add_literal, offset_with_removed_text,
offset_with_removed_text_before_fill, find_insn_action,
print_action_list, print_removed_literals): New.
(offset_with_removed_literals): Delete.
(xtensa_relax_info struct): Add is_relaxable_asm_section, action_list,
fix_array, fix_array_count, allocated_relocs, relocs_count, and
allocated_relocs_count fields.
(init_xtensa_relax_info): Initialize new fields.
(reloc_bfd_fix struct): Add new translated field.
(reloc_bfd_fix_init): Add translated parameter and use it to set the
translated field.
(fix_compare, cache_fix_array): New.
(get_bfd_fix): Remove fix_list parameter and get all relax_info for the
section via get_xtensa_relax_info. Use cache_fix_array to set up
sorted fix_array and use bsearch instead of linear search.
(section_cache_t): New struct.
(init_section_cache, section_cache_section, clear_section_cache): New.
(ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types.
(init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds,
extend_ebb_bounds_forward, extend_ebb_bounds_backward,
insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action):
New.
(retrieve_contents): Use bfd_get_section_limit.
(elf_xtensa_relax_section): Add relocations_analyzed flag. Update call
to compute_removed_literals. Free value_map_hash_table when no longer
needed.
(analyze_relocations): Check is_relaxable_asm_section flag. Call
compute_text_actions for all sections.
(find_relaxable_sections): Mark sections as relaxable if they contain
ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init
call. Increment relax_info src_count field only for appropriate
relocation types. Remove is_literal_section check.
(collect_source_relocs): Use bfd_get_section_limit. Adjust calls to
r_reloc_init and find_associated_l32r_irel. Check
is_relaxable_asm_section flag. Handle L32R instructions with absolute
literals. Pass is_abs_literal flag to init_source_reloc.
(is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for
CONST16 instructions. Adjust calls to r_reloc_init and
pcrel_reloc_fits. Handle weak symbols conservatively.
(find_associated_l32r_irel): Add bfd parameter and pass it to
is_l32r_relocation.
(compute_text_actions, compute_ebb_proposed_actions,
compute_ebb_actions, check_section_ebb_pcrels_fit,
check_section_ebb_reduces, text_action_add_proposed,
compute_fill_extra_space): New.
(remove_literals): Replace with ...
(compute_removed_literals): ... this function. Call
init_section_cache. Use bfd_get_section_limit. Sort internal_relocs.
Call xtensa_read_table_entries to get the property table. Skip
relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new
is_removable_literal, remove_dead_literal, and
identify_literal_placement functions.
(get_irel_at_offset): Rewrite to use bsearch on sorted relocations
instead of linear search.
(is_removable_literal, remove_dead_literal,
identify_literal_placement): New.
(relocations_reach): Update check for literal not referenced by any
PC-relative relocations. Adjust call to pcrel_reloc_fits.
(coalesce_shared_literal, move_shared_literal): New.
(relax_section): Use bfd_get_section_limit. Call
translate_section_fixes. Update calls to r_reloc_init and
offset_with_removed_text. Check new is_relaxable_asm_section flag.
Add call to pin_internal_relocs. Add special handling for
R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset
info to calculate new addend_displacement variable. Replace code for
deleting literals with more general code to perform the actions
determined by the action_list for the section.
(translate_section_fixes, translate_reloc_bfd_fix): New.
(translate_reloc): Check new is_relaxable_asm_section flag. Call
find_removed_literal only if is_operand_relocation. Update call to
offset_with_removed_text. Use new target_offset and removed_bytes
variables.
(move_literal): New.
(relax_property_section): Use bfd_get_section_limit. Set new
is_full_prop_section flag and handle new property tables. Update calls
to r_reloc_init and offset_with_removed_text. Check
is_relaxable_asm_section flag. Handle expansion of zero-sized
unreachable entries, with use of offset_with_removed_text_before_fill.
For relocatable links, combine entries only for literal tables.
(relax_section_symbols): Check is_relaxable_asm_section flag. Update
calls to offset_with_removed_text. Translate st_size field for
function symbols.
(do_fix_for_relocatable_link): Change to return bfd_boolean to indicate
failure. Add contents parameter. Update call to get_bfd_fix. Update
call to r_reloc_init. Call _bfd_error_handler and return FALSE for
R_XTENSA_ASM_EXPAND relocs.
(do_fix_for_final_link): Add input_bfd and contents parameters. Update
call to get_bfd_fix. Include offset from contents for partial_inplace
relocations.
(is_reloc_sym_weak): New.
(pcrel_reloc_fits): Use new xtensa-isa.h functions.
(prop_sec_len): New.
(xtensa_is_property_section): Handle new property sections.
(is_literal_section): Delete.
(internal_reloc_compare): When r_offset matches, compare r_info and
r_addend to make sorting predictable.
(internal_reloc_matches): New.
(xtensa_get_property_section_name): Handle new property sections.
(xtensa_get_property_predef_flags): New.
(xtensa_callback_required_dependence): Use bfd_get_section_limit.
Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init.
* xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c.
(xtisa_errno, xtisa_error_msg): New variables.
(xtensa_isa_errno, xtensa_isa_error_msg): New.
(xtensa_insnbuf_alloc): Add error handling.
(xtensa_insnbuf_to_chars): Add num_chars parameter. Update to
use xtensa_format_decode. Add error handling.
(xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the
instruction length to find the number of bytes to copy.
(xtensa_isa_init): Add error handling. Replace calls to
xtensa_load_isa and xtensa_extend_isa with code to initialize lookup
tables in the xtensa_modules structure.
(xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa,
xtensa_extend_isa): Delete.
(xtensa_isa_free): Change to only free lookup tables.
(opname_lookup_compare): Replace with ...
(xtensa_isa_name_compare): ... this function. Use strcasecmp.
(xtensa_insn_maxlength): Rename to ...
(xtensa_isa_maxlength): ... this.
(xtensa_insn_length): Delete.
(xtensa_insn_length_from_first_byte): Replace with ...
(xtensa_isa_length_from_chars): ... this function.
(xtensa_num_opcodes): Rename to ...
(xtensa_isa_num_opcodes): ... this.
(xtensa_isa_num_pipe_stages, xtensa_isa_num_formats,
xtensa_isa_num_regfiles, xtensa_isa_num_stages,
xtensa_isa_num_sysregs, xtensa_isa_num_interfaces,
xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup,
xtensa_format_decode, xtensa_format_encode, xtensa_format_length,
xtensa_format_num_slots, xtensa_format_slot_nop_opcode,
xtensa_format_get_slot, xtensa_format_set_slot): New functions.
(xtensa_opcode_lookup): Add error handling.
(xtensa_decode_insn): Replace with ...
(xtensa_opcode_decode): ... this function, with new format and
slot parameters. Add error handling.
(xtensa_encode_insn): Replace with ...
(xtensa_opcode_encode): ... this function, which does the encoding via
one of the entries in the "encode_fns" array. Add error handling.
(xtensa_opcode_name): Add error handling.
(xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop,
xtensa_opcode_is_call): New.
(xtensa_num_operands): Replace with ...
(xtensa_opcode_num_operands): ... this function. Add error handling.
(xtensa_opcode_num_stateOperands,
xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses,
xtensa_opcode_funcUnit_use, xtensa_operand_name,
xtensa_operand_is_visible): New.
(xtensa_get_operand, xtensa_operand_kind): Delete.
(xtensa_operand_inout): Add error handling and special-case for
"sout" operands.
(xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to
operate on one slot of an instruction. Added error handling.
(xtensa_operand_encode): Handle default operands with no encoding
functions. Check for success by comparing against decoded value.
Add error handling.
(xtensa_operand_decode): Handle default operands. Return decoded value
through argument pointer. Add error handling.
(xtensa_operand_is_register, xtensa_operand_regfile,
xtensa_operand_num_regs, xtensa_operand_is_known_reg): New.
(xtensa_operand_isPCRelative): Rename to ...
(xtensa_operand_is_PCrelative): ... this. Add error handling.
(xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value
through argument pointer. Add error handling.
(xtensa_stateOperand_state, xtensa_stateOperand_inout,
xtensa_interfaceOperand_interface, xtensa_regfile_lookup,
xtensa_regfile_lookup_shortname, xtensa_regfile_name,
xtensa_regfile_shortname, xtensa_regfile_view_parent,
xtensa_regfile_num_bits, xtensa_regfile_num_entries,
xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits,
xtensa_state_is_exported, xtensa_sysreg_lookup,
xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number,
xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name,
xtensa_interface_num_bits, xtensa_interface_inout,
xtensa_interface_has_side_effect, xtensa_funcUnit_lookup,
xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New.
* xtensa-modules.c: Rewrite to use new data structures.
* reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16,
BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP,
BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP,
BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP,
BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP,
BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP,
BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP,
BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP,
BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP,
BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT,
BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT,
BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT,
BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT,
BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT,
BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT,
BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT,
BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations.
* Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies.
* Makefile.in: Regenerate.
* bfd-in2.h: Likewise.
* libbfd.h: Likewise.
gas ChangeLog
* config/tc-xtensa.c (absolute_literals_supported): New global flag.
(UNREACHABLE_MAX_WIDTH): Define.
(XTENSA_FETCH_WIDTH): Delete.
(cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end,
prefer_const16, prefer_l32r): New global variables.
(LIT4_SECTION_NAME): Define.
(lit4_state struct): Add lit4_seg_name and lit4_seg fields.
(XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.
(frag_flags struct): New.
(xtensa_block_info struct): Move from tc-xtensa.h. Add flags field.
(subseg_map struct): Add cur_total_freq and cur_target_freq fields.
(bitfield, bit_is_set, set_bit, clear_bit): Define.
(MAX_FORMATS): Define.
(op_placement_info struct, op_placement_table): New.
(O_pltrel, O_hi16, O_lo16): Define.
(directiveE enum): Rename directive_generics to directive_transform.
Delete directive_relax. Add directive_schedule,
directive_absolute_literals, and directive_last_directive.
(directive_info): Rename "generics" to "transform". Delete "relax".
Add "schedule" and "absolute-literals".
(directive_state): Adjust entries to match changes in directive_info.
(xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h.
(xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode,
xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New.
(xtensa_j_opcode, xtensa_rsr_opcode): Delete.
(align_only_targets, software_a0_b_retw_interlock,
software_avoid_b_j_loop_end, maybe_has_b_j_loop_end,
software_avoid_short_loop, software_avoid_close_loop_end,
software_avoid_all_short_loops, specific_opcode): Delete.
(warn_unaligned_branch_targets): New.
(workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop,
workaround_close_loop_end, workaround_all_short_loops): Default FALSE.
(option_[no_]link_relax, option_[no_]transform,
option_[no_]absolute_literals, option_warn_unaligned_targets,
option_prefer_l32r, option_prefer_const16, option_target_hardware):
New enum values.
(option_[no_]align_only_targets, option_literal_section_name,
option_text_section_name, option_data_section_name,
option_bss_section_name, option_eb, option_el): Delete.
(md_longopts): Add entries for: [no-]transform, [no-]absolute-literals,
warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax,
and target-hardware. Delete entries for [no-]target-align-only,
literal-section-name, text-section-name, data-section-name, and
bss-section-name.
(md_parse_option): Handle new options and remove old ones. Accept but
ignore [no-]density options. Warn for [no-]generics and [no-]relax
and treat them as [no-]transform.
(md_show_usage): Add new options and remove old ones.
(xtensa_setup_hw_workarounds): New.
(md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add
"long", "short", "loc" and "frequency" entries.
(use_generics): Rename to ...
(use_transform): ... this function. Add past_xtensa_end check.
(use_longcalls): Add past_xtensa_end check.
(code_density_available, can_relax): Delete.
(do_align_targets): New.
(get_directive): Accept dashes in directive names. Warn about
[no-]generics and [no-]relax directives and treat them as
[no-]transform.
(xtensa_begin_directive): Call md_flush_pending_output only for some
directives. Check for directives inside instruction bundles. Warn
about deprecated ".begin literal" usage. Warn and ignore [no-]density
directives. Handle new directives. Check generating_literals flag
for literal_prefix.
(xtensa_end_directive): Check for directives inside instruction
bundles. Warn and ignore [no-]density directives. Handle new
directives. Call xtensa_set_frag_assembly_state.
(xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc,
xtensa_dwarf2_emit_insn): New.
(xtensa_literal_position): Call md_flush_pending_output. Do not check
use_literal_section flag.
(xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute
literals. Use xtensa_elf_cons to parse the expression.
(xtensa_literal_prefix): Do not check use_literal_section. Support
".lit4" sections for absolute literals. Change prefix convention to
replace ".text" (or ".t" in a linkonce section). No need to call
subseg_set.
(xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New.
(expression_end): Handle closing braces and colons.
(PLT_SUFFIX, plt_suffix): Delete.
(expression_maybe_register): Use new xtensa-isa.h functions. Use
xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16
and O_hi16 expressions as well.
(tokenize_arguments): Handle closing braces and colons.
(parse_arguments): Use new xtensa-isa.h functions. Handle "invisible"
operands and paired register syntax.
(get_invisible_operands): New.
(xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use
new xtensa-isa.h functions.
(xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New.
(xg_translate_idioms): Check if inside bundle. Use use_transform.
Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density
instructions. Use xtensa_translate_zero_immed.
(operand_is_immed, operand_is_pcrel_label): Delete.
(get_relaxable_immed): Use new xtensa-isa.h functions.
(get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h
functions.
(xtensa_print_insn_table, print_vliw_insn): New.
(is_direct_call_opcode): Use new xtensa-isa.h functions.
(is_call_opcode, is_loop_opcode, is_conditional_branch_opcode,
is_branch_or_jump_opcode): Delete.
(is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New.
(opnum_to_reloc, reloc_to_opnum): Delete.
(xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new
xtensa-isa.h functions. Operate on one slot of an instruction.
(xtensa_insnbuf_set_immediate_field, is_negatable_branch,
xg_get_insn_size): Delete.
(xg_get_build_instr_size): Use xg_get_single_size.
(xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to
xg_build_widen_table. Use xg_get_single_size.
(xg_get_max_narrow_insn_size): Delete.
(xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size,
xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use
xg_get_single_size.
(xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and
OP_OPERAND_LOW16U. Check xg_valid_literal_expression.
(xg_expand_to_stack, xg_expand_narrow): Update calls to
xg_build_widen_table. Use xg_get_single_size.
(xg_immeds_fit): Use new xtensa-isa.h functions. Update call to
xg_check_operand.
(xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and
treat weak symbols conservatively.
(xg_check_operand): Use new xtensa-isa.h functions.
(is_dnrange): Delete.
(xg_assembly_relax): Inline previous calls to tinsn_copy.
(xg_finish_frag): Specify separate relax states for the frag and slot0.
(is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new
xtensa-isa.h functions.
(xg_instruction_matches_option_term, xg_instruction_matches_or_options,
xg_instruction_matches_options): New.
(xg_instruction_matches_rule): Handle O_register expressions. Call
xg_instruction_matches_options.
(transition_rule_cmp): New.
(xg_instruction_match): Update call to xg_build_simplify_table.
(xg_build_token_insn): Record loc fields.
(xg_simplify_insn): Check is_specific_opcode field and
density_supported flag.
(xg_expand_assembly_insn): Skip checking code_density_available. Use
new xtensa-isa.h functions. Call use_transform instead of can_relax.
(xg_assemble_literal): Add error handling for O_big. Call
record_alignment. Handle O_pltrel.
(xg_valid_literal_expression): New.
(xg_assemble_literal_space): Add slot parameter. Remove call to
set_expr_symbol_offset. Add call to record_alignment. Update call to
xg_finish_frag.
(xg_emit_insn): Delete.
(xg_emit_insn_to_buf): Add format parameter. Update calls to
xg_add_opcode_fix and xtensa_insnbuf_to_chars.
(xg_add_opcode_fix): Change opcode parameter to tinsn and add format
and slot parameters. Handle new "alternate" relocations for absolute
literals and CONST16 instructions. Check for bad uses of O_lo16 and
O_hi16. Use new xtensa-isa.h functions.
(xg_assemble_tokens): Delete.
(is_register_writer): Use new xtensa-isa.h functions.
(is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of
old-style RSR from LCOUNT.
(next_frag_opcode): Delete.
(next_frag_opcode_is_loop, next_frag_format_size, frag_format_size,
update_next_frag_state): New.
(update_next_frag_nop_state): Delete.
(next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop.
(xtensa_mark_literal_pool_location): Check use_literal_section flag and
the state of the absolute-literals directive. Add calls to
record_alignment and xtensa_set_frag_assembly_state. Call
xtensa_switch_to_non_abs_literal_fragment instead of
xtensa_switch_to_literal_fragment.
(build_nop): New.
(assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars.
(get_expanded_loop_offset): Change check for undefined opcode to an
assertion.
(xtensa_set_frag_assembly_state, relaxable_section,
xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets,
xtensa_find_unaligned_loops, xg_apply_tentative_value): New.
(md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1.
Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes.
Call init_op_placement_info_table and xtensa_set_frag_assembly_state.
(xtensa_init_fix_data): New.
(xtensa_frob_label): Reset label symbol to the current frag. Check
do_align_targets and generating_literals flag. Propagate frequency
info to new alignment frag. Call xtensa_set_frag_assembly_state.
(xtensa_unrecognized_line): New.
(xtensa_flush_pending_output): Check if inside a bundle. Add a call
to xtensa_set_frag_assembly_state.
(error_reset_cur_vinsn): New.
(md_assemble): Remove check for literal frag. Remove call to
istack_init. Call use_transform instead of use_generics. Parse
explicit instruction format specifiers. Move code for
a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call
error_reset_cur_vinsn on errors. Add call to get_invisible_operands.
Add dwarf2_where call. Remote automatic alignment for ENTRY
instructions. Move call to xtensa_clear_insn_labels to the end.
Rearrange to handle bundles.
(xtensa_cons_fix_new): Delete.
(xtensa_handle_align): New.
(xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove
assignment to is_no_density field.
(md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc
instead of reloc_to_opnum. Handle "alternate" relocations.
(xtensa_force_relocation, xtensa_check_inside_bundle,
xtensa_elf_section_change_hook): New.
(xtensa_symbol_new_hook): Delete.
(xtensa_fix_adjustable): Check for difference of symbols with an
offset. Check for external and weak symbols.
(md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs.
(md_estimate_size_before_relax): Return expansion for the first slot.
(tc_gen_reloc): Handle difference of symbols by producing
XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference
into the output. Handle new XTENSA_SLOT*_OP relocs by storing the
tentative values into the output when linkrelax is set.
(XTENSA_PROP_SEC_NAME): Define.
(xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags.
Create literal tables only if using literal sections. Create new
property tables instead of old instruction tables. Check for unaligned
branch targets and loops.
(finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes,
new_resource_table, clear_resource_table, resize_resource_table,
resources_available, reserve_resources, release_resources,
opcode_funcUnit_use_unit, opcode_funcUnit_use_stage,
resources_conflict, xg_find_narrowest_format, relaxation_requirements,
bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New.
(xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end
flag. Update checks for workaround options. Call
xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns.
(xtensa_cleanup_align_frags): Add special case for branch targets.
Check for and mark unreachable frags.
(xtensa_fix_target_frags): Remove use of align_only_targets flag.
Use RELAX_LOOP_END_BYTES in special case for negatable branch at the
end of a zero-overhead loop body.
(frag_can_negate_branch): Handle instructions with multiple slots.
Use new xtensa-isa.h functions
(xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range,
xtensa_mark_zcl_first_insns): New.
(xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if
transformations are disabled.
(next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle
multislot instructions.
(xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags):
Likewise. Also error if transformations are disabled.
(unrelaxed_frag_max_size): New.
(unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new
xtensa-isa.h functions.
(xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use
xtensa_opcode_is_loop instead of is_loop_opcode.
(get_text_align_power): Replace as_fatal with assertion.
(get_text_align_fill_size): Iterate instead of using modulus when
use_nops is false.
(get_noop_aligned_address): Assert that this is for a machine-dependent
RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop,
xg_get_single_size, and frag_format_size.
(get_widen_aligned_address): Rename to ...
(get_aligned_diff): ... this function. Add max_diff parameter.
Remove handling of rs_align/rs_align_code frags. Use
next_frag_format_size, get_text_align_power, get_text_align_fill_size,
next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff
and pass it back to caller.
(xtensa_relax_frag): Use relax_frag_loop_align. Add code for new
RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN,
RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen.
(relax_frag_text_align): Rename to ...
(relax_frag_loop_align): ... this function. Assume loops can only be
in the first slot of an instruction.
(relax_frag_add_nop): Use assemble_nop instead of constructing an OR
instruction. Remove call to frag_wane.
(relax_frag_narrow): Rename to ...
(relax_frag_for_align): ... this function. Extend to handle
RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with
RELAX_NARROW for the first slot.
(find_address_of_next_align_frag, bytes_to_stretch): New.
(future_alignment_required): Use find_address_of_next_align_frag and
bytes_to_stretch. Look ahead to subsequent frags to make smarter
alignment decisions.
(relax_frag_immed): Add format, slot, and estimate_only parameters.
Check if transformations are enabled for b_j_loop_end workaround.
Use new xtensa-isa.h functions and handle multislot instructions.
Update call to xg_assembly_relax.
(md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE,
RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP
frag types.
(convert_frag_narrow): Add segP, format and slot parameters. Call
convert_frag_immed for branch instructions. Adjust calls to
tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use
xg_get_single_size and xg_get_single_format.
(convert_frag_fill_nop): New.
(convert_frag_immed): Add format and slot parameters. Handle multislot
instructions and use new xtensa-isa.h functions. Update calls to
tinsn_immed_from_frag and xg_assembly_relax. Check if transformations
enabled for b_j_loop_end workaround. Use build_nop instead of
assemble_nop. Check is_specific_opcode flag. Check for unreachable
frags. Use xg_get_single_size. Handle O_pltrel.
(fix_new_exp_in_seg): Remove check for old plt flag.
(convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and
xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check
for loop opcode to an assertion. Mark all frags up to the end of the
loop as not transformable.
(get_last_insn_flags, set_last_insn_flags): Use get_subseg_info.
(get_subseg_info): New.
(xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null
check for dest_seg.
(xtensa_switch_to_literal_fragment): Rewrite to handle absolute
literals and use xtensa_switch_to_non_abs_literal_fragment otherwise.
(xtensa_switch_to_non_abs_literal_fragment): New.
(cache_literal_section): Add is_code parameter and pass it through to
retrieve_literal_seg.
(retrieve_literal_seg): Add is_code parameter and use it to set the
flags on the literal section. Handle case where head parameter is 0.
(get_frag_is_no_transform, set_frag_is_specific_opcode,
set_frag_is_no_transform): New.
(xtensa_create_property_segments): Add end_property_function parameter
and pass it through to add_xt_block_frags. Call bfd_get_section_flags
and skip SEC_DEBUGGING and !SEC_ALLOC sections.
(xtensa_create_xproperty_segments, section_has_xproperty): New.
(add_xt_block_frags): Add end_property_function parameter and call it
if it is non-zero. Call xtensa_frag_flags_init.
(xtensa_frag_flags_is_empty, xtensa_frag_flags_init,
get_frag_property_flags, frag_flags_to_number,
xtensa_frag_flags_combinable, xt_block_aligned_size,
xtensa_xt_block_combine, add_xt_prop_frags,
init_op_placement_info_table, opcode_fits_format_slot,
xg_get_single_size, xg_get_single_format): New.
(istack_push): Inline call to tinsn_copy.
(tinsn_copy): Delete.
(tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and
CONST16 opcodes. Handle O_big, O_illegal, and O_absent.
(tinsn_has_complex_operands): Handle O_hi16 and O_lo16.
(tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h
functions. Handle invisible operands.
(tinsn_to_slotbuf): New.
(tinsn_check_arguments): Use new xtensa-isa.h functions.
(tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn,
vinsn_from_chars, and xg_free_vinsn.
(tinsn_from_insnbuf): New.
(tinsn_immed_from_frag): Add slot parameter and handle multislot
instructions. Handle symbol differences.
(get_num_stack_text_bytes): Use xg_get_single_size.
(xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes,
xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register,
get_expr_register, set_expr_symbol_offset_diff): New.
* config/tc-xtensa.h (MAX_SLOTS): Define.
(xtensa_relax_statesE): Move from tc-xtensa.c. Add
RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS,
RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and
RELAX_NONE types.
(RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c.
(xtensa_frag_type struct): Add is_assembly_state_set,
use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode,
is_align, is_text_align, alignment, and is_first_loop_insn fields.
Replace is_generics and is_relax fields by is_no_transform field.
Delete is_text and is_longcalls fields. Change text_expansion and
literal_expansion to arrays of MAX_SLOTS entries. Add arrays of
per-slot information: literal_frags, slot_subtypes, slot_symbols,
slot_sub_symbols, and slot_offsets. Add fr_prev field.
(xtensa_fix_data struct): New.
(xtensa_symfield_type struct): Delete plt field.
(xtensa_block_info struct): Move definition to tc-xtensa.h. Add
forward declaration here.
(xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec.
(XTENSA_SECTION_RENAME): Undefine.
(TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT,
tc_unrecognized_line, md_do_align, md_elf_section_change_hook,
HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define.
(TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete.
(unit_num_copies_func, opcode_num_units_func,
opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New.
(resource_table struct): New.
* config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10.
(TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype,
literal_space, symbol, sub_symbol, offset, and literal_frag fields.
(tinsn_copy): Delete prototype.
(vliw_insn struct): New.
* config/xtensa-relax.c (insn_pattern_struct): Add options field.
(widen_spec_list): Add option conditions for density and boolean
instructions. Add expansions using CONST16 and conditions for using
CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for
predicted branches.
(simplify_spec_list): Add option conditions for density instructions.
Add entry for NOP instruction.
(append_transition): Add cmp function pointer parameter and use it to
insert the new entry in order.
(operand_function_LOW16U, operand_function_HI16U): New.
(xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle
OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
(enter_opname, split_string): Use xstrdup instead of strdup.
(init_insn_pattern): Initialize new options field.
(clear_req_or_option_list, clear_req_option_list,
clone_req_or_option_list, clone_req_option_list, parse_option_cond):
New.
(parse_insn_pattern): Parse option conditions.
(transition_applies): New.
(build_transition): Use new xtensa-isa.h functions. Fix incorrectly
swapped last arguments in calls to append_constant_value_condition.
Call clone_req_option_list. Add warning about invalid opcode.
Handle LOW16U and HI16U function names.
(build_transition_table): Add cmp parameter and use it in calls to
append_transition. Use new xtensa-isa.h functions. Check
transition_applies before adding entries.
(xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and
pass it through to build_transition_table.
* config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList,
ReqOption, transition_cmp_fn): New types.
(OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
(transition_rule struct): Add options field.
* doc/as.texinfo (Overview): Update Xtensa options.
* doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density,
--[no-]relax, and --[no-]generics options. Update descriptions of
--text-section-literals and --[no-]longcalls. Add
--[no-]absolute-literals and --[no-]transform.
(Xtensa Syntax): Add description of syntax for FLIX instructions.
Remove use of "generic" and "specific" terminology for opcodes.
(Xtensa Registers): Generalize the syntax description to include
user-defined register files.
(Xtensa Automatic Alignment): Update.
(Xtensa Branch Relaxation): Mention limitation of unconditional jumps.
(Xtensa Call Relaxation): Linker can now remove most of the overhead.
(Xtensa Directives): Remove confusing rules about precedence.
(Density Directive, Relax Directive): Delete.
(Schedule Directive): New.
(Generics Directive): Rename to ...
(Transform Directive): ... this node.
(Literal Directive): Update for absolute literals. Missing
literal_position directive is now an error.
(Literal Position Directive): Update for absolute literals.
(Freeregs Directive): Delete.
(Absolute Literals Directive): New.
(Frame Directive): Minor editing.
* Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf):
Update dependencies.
* Makefile.in: Regenerate.
gas/testsuite ChangeLog
* gas/xtensa/all.exp: Adjust expected error message for j_too_far.
Change entry_align test to expect an error.
* gas/xtensa/entry_misalign2.s: Use no-transform instead of
no-generics directives.
include ChangeLog
* xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS,
XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New.
(XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete.
* xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete.
(config_sturct struct): Delete.
(XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE,
XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN,
XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP,
XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL,
XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define.
(xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New.
(xtensa_insn_decode_fn): Rename to ...
(xtensa_opcode_decode_fn): ... this.
(xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn,
xtensa_undo_reloc_fn): Update.
(xtensa_encoding_template_fn): Delete.
(xtensa_opcode_encode_fn, xtensa_format_decode_fn,
xtensa_length_decode_fn): New.
(xtensa_format_internal, xtensa_slot_internal): New types.
(xtensa_operand_internal): Delete operand_kind, inout, isPCRelative,
get_field, and set_field fields. Add name, field_id, regfile,
num_regs, and flags fields.
(xtensa_arg_internal): New type.
(xtensa_iclass_internal): Change operands field to array of
xtensa_arg_internal. Add num_stateOperands, stateOperands,
num_interfaceOperands, and interfaceOperands fields.
(xtensa_opcode_internal): Delete length, template, and iclass fields.
Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses.
(opname_lookup_entry): Delete.
(xtensa_regfile_internal, xtensa_interface_internal,
xtensa_funcUnit_internal, xtensa_state_internal,
xtensa_sysreg_internal, xtensa_lookup_entry): New.
(xtensa_isa_internal): Replace opcode_table field with opcodes field.
Change type of opname_lookup_table. Delete num_modules,
module_opcode_base, module_decode_fn, config, and has_density fields.
Add num_formats, formats, format_decode_fn, length_decode_fn,
num_slots, slots, num_fields, num_operands, operands, num_iclasses,
iclasses, num_regfiles, regfiles, num_states, states,
state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table,
max_sysreg_num, sysreg_table, num_interfaces, interfaces,
interface_lookup_table, num_funcUnits, funcUnits and
funcUnit_lookup_table fields.
(xtensa_isa_module, xtensa_isa_modules): Delete.
(xtensa_isa_name_compare): New prototype.
(xtisa_errno, xtisa_error_msg): New.
* xtensa-isa.h (XTENSA_ISA_VERSION): Define.
(xtensa_isa): Change type.
(xtensa_operand): Delete.
(xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg,
xtensa_interface, xtensa_funcUnit, xtensa_isa_status,
xtensa_funcUnit_use): New types.
(libisa_module_specifier): Delete.
(xtensa_isa_errno, xtensa_isa_error_msg): New prototypes.
(xtensa_insnbuf_free, xtensa_insnbuf_to_chars,
xtensa_insnbuf_from_chars): Update prototypes.
(xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa,
xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn,
xtensa_encode_insn, xtensa_insn_length,
xtensa_insn_length_from_first_byte, xtensa_num_operands,
xtensa_operand_kind, xtensa_encode_result,
xtensa_operand_isPCRelative): Delete.
(xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field,
xtensa_operand_set_field, xtensa_operand_encode,
xtensa_operand_decode, xtensa_operand_do_reloc,
xtensa_operand_undo_reloc): Update prototypes.
(xtensa_isa_maxlength, xtensa_isa_length_from_chars,
xtensa_isa_num_pipe_stages, xtensa_isa_num_formats,
xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states,
xtensa_isa_num_sysregs, xtensa_isa_num_interfaces,
xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup,
xtensa_format_decode, xtensa_format_encode, xtensa_format_length,
xtensa_format_num_slots, xtensa_format_slot_nop_opcode,
xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode,
xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump,
xtensa_opcode_is_loop, xtensa_opcode_is_call,
xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands,
xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses,
xtensa_opcode_funcUnit_use, xtensa_operand_name,
xtensa_operand_is_visible, xtensa_operand_is_register,
xtensa_operand_regfile, xtensa_operand_num_regs,
xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative,
xtensa_stateOperand_state, xtensa_stateOperand_inout,
xtensa_interfaceOperand_interface, xtensa_regfile_lookup,
xtensa_regfile_lookup_shortname, xtensa_regfile_name,
xtensa_regfile_shortname, xtensa_regfile_view_parent,
xtensa_regfile_num_bits, xtensa_regfile_num_entries,
xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits,
xtensa_state_is_exported, xtensa_sysreg_lookup,
xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number,
xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name,
xtensa_interface_num_bits, xtensa_interface_inout,
xtensa_interface_has_side_effect, xtensa_funcUnit_lookup,
xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes.
* elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32,
R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations.
(XTENSA_PROP_SEC_NAME): Define.
(property_table_entry): Add flags field.
(XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.
ld ChangeLog
* ld.texinfo (Xtensa): Describe new linker relaxation to optimize
assembler-generated longcall sequences. Describe new --size-opt
option.
* emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section.
* emultempl/xtensaelf.em (remove_section,
replace_insn_sec_with_prop_sec, replace_instruction_table_sections,
elf_xtensa_after_open): New.
(OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT,
OPTION_NO_LITERAL_MOVEMENT): Define.
(elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals.
(PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement.
(PARSE_AND_LIST_OPTIONS): Add --size-opt.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT,
OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT.
(LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open.
* scripttempl/elfxtensa.sc: Update with changes from elf.sc.
* Makefile.am (eelf32xtensa.c): Update dependencies.
* Makefile.in: Regenerate.
ld/testsuite ChangeLog
* ld-xtensa/lcall1.s: Use .literal directive.
* ld-xtensa/lcall2.s: Align function entry.
* ld-xtensa/coalesce2.s: Likewise.
opcodes ChangeLog
* xtensa-dis.c (state_names): Delete.
(fetch_data): Use xtensa_isa_maxlength.
(print_xtensa_operand): Replace operand parameter with opcode/operand
pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions.
(print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot
instruction bundles. Use xmalloc instead of malloc.
need_lsda_relative.
* elf-eh-frame.c (_bfd_elf_eh_frame_section_offset): Set
need_relative or need_lsda_relative if we are processing an
offset for a reloc on a FDE initial loc or LSDA field
respectively.
(_bfd_elf_write_section_eh_frame): Test need_relative and
need_lsda_relative in place of corresponding make_* field
when deciding to use pc-relative encodings.
* dwarf2.c (_bfd_dwarf2_find_nearest_line): Add output section
vma and output offset to address.
* simple.c (simple_save_output_info): Only set output section
and offset for debug sections, or those not already set up by
the linker.
(bfd_simple_get_relocated_section_contents): Update comment.
ld/testsuite/
* ld-elfvsb/elfvsb.exp: Remove file name from "undefined ref" string.
* elf.c (IS_LOADED): Define.
(assign_file_positions_for_segments): Don't round up file offset of
PT_LOAD segments containing no SEC_LOAD sections, instead round down.
Delete code handling link script adjustment of lma. Do the adjust
in later code handling similar ajustments. Remove dead code error
check. Warn if section lma would require a negative offset
adjustment. Tweak lma adjustment to use p_filesz rather than p_memsz.
Use p_vaddr + p_memsz inside section loop in place of voff. Don't
update voff in section loop. Change voff in segment loop to be an
adjustment on top of "off". Set sec->filepos and update "off" later.
Test for loadable sections consistently using IS_LOADED. Similarly,
test for alloc-only sections other than .tbss consistently.
Don't bother checking SEC_ALLOC in PT_LOAD segments. Remove FIXME.
Tidy PT_NOTE handling. Use %B and %A in error messages.
(assign_file_positions_except_relocs): Use %B in error message.
ld/testsuite/
* ld-scripts/overlay-size.d: Don't check .mbss lma.
* ld-sh/sh64/mix1.xd: Update for changed .bss file offset.
* ld-sh/sh64/shdl32.xd: Likewise.
* ld-sh/sh64/shdl64.xd: Likewise.
* elf32-arm.h (elf32_arm_gc_sweep_hook): Add #ifndef OLD_ARM_ABI
around uses of R_ARM_TARGET1.
(elf32_arm_check_relocs): Likewise.
ld/
* emultempl/armelf_oabi.em (before_allocation): Add extra zero param
to bfd_elf32_arm_process_before_allocation call.
(hpux_core_core_file_p): Fix computation of offset in call
to bfd_seek. Create a ".reg" section from an arbitrary
".reg/<id>" section if none was created after having read
all sections.
case R_CRIS_32_GOTPLT>: For internal error message, handle NULL
symname.
(cris_elf_check_relocs) <case R_CRIS_32_PLT_PCREL>: Don't try to
handle symbol visibility here.
(is_ppc64_elf_target): Rename from is_ppc64_target. Update all
callers.
(ppc_stub_name): Remove trailing "+0" on stub name.
(create_linkage_sections): Create relocations for
branch lookup table when --emit-relocs as well as when --shared.
(ppc_build_one_stub): Emit relocs for long branch stubs. Adjust
relbrlt test. For --emit-stub-syms, always output a sym even when
one already exists on a plt call stub. Put stub type in the stub
symbol name.
(ppc_size_one_stub): Size long branch stub relocs. Adjust relbrlt
test.
(ppc64_elf_size_stubs): Count global sym stubs added. Zero
reloc_count in stub sections. Adjust relbrlt test.
(ppc64_elf_build_stubs): Adjust relbrlt test. Tweak stats output.
* elflink.c (bfd_elf_size_dynamic_sections): Fix comment typo.
(elf_link_input_bfd): Ignore symbol index zero relocs when checking
for relocs against discarded symbols. Fix comments.
* elf.c (_bfd_elf_make_dynamic_segment): New function, split out
from ...
(map_sections_to_segments): ... here. Use it. Assign a file
position to the .dynamic section if it is not loadable, but part
of the PT_DYNAMIC segment.
* elf32-arm.h (elf32_arm_finish_dynamic_sections): Use file
offsets, not VMAs, for the BPABI. Do not fill in the header in
the .got.plt section for the BPABI.
* elfarm-nabi.c (elf32_arm_symbian_modify_segment_map): Add a
PT_DYNAMIC segment.
(elf_backend_want_got_plt): Define to zero for Symbian OS.
* emulparams/armsymbian.sh: Use armbpabi script.
* scripttempl/armbpabi.sc: New script.
(ppc64_elf_check_directives): ..here.
(ppc64_elf_size_dynamic_sections): Use it here to check bfd type
before accessing ppc64_elf_tdata.
(ppc64_elf_finish_dynamic_sections): And here too.
* configure.in (bfd_elf32_bigarm_symbian_vec): Add it.
(bfd_elf32_littlearm_symbian_vec): Likewise.
* configure: Regenerated.
* elf-bfd.h (elf_backend_data): Add dynamic_sec_flags.
* elf32-arm.h (PLT_HEADER_SIZE): Do not define.
(PLT_ENTRY_SIZE): Likewise.
(bfd_vma_elf32_arm_symbian_plt_entry): New
variable.
(elf32_arm_link_hash_table): Add plt_header_size, plt_entry_size,
and symbian_p.
(create_got_section): Don't create sections when generating BPABI
objects.
(elf32_arm_create_dynamic_sections): Tidy.
(elf32_arm_link_hash_table_create): Set plt_header_size,
plt_entry_size, and symbian_p.
(elf32_arm_check_relocs): Do not mark .rel.dyn as loadable when
generating BPABI objects.
(allocate_dynrelocs): Use htab->plt_header_size, not
PLT_HEADER_SIZE. Do not add to .got.plt when
generating BPABI objects.
(elf32_arm_finish_dynamic_symbol): Generate Symbian OS PLTs.
* elfarm-nabi.c: Add SymbianOS target vectors.
* elflink.c (_bfd_elf_create_got_section): Use dynamic_sec_flags.
(_bfd_elf_link_create_dynamic_sections): Likewise.
* elfxx-target.h (ELF_DYNAMIC_SEC_FLAGS): New macro.
(elfNN_bed): Use it.
* targets.c (bfd_elf32_bigarm_symbian_vec): New variable.
(bfd_elf32_littlearm_symbian_vec): Likewise.
(_bfd_target_vector): Add them.
* Makefile.am (TARG_ENV_HFILES): Add te-symbian.h.
* Makefile.in: Regenerated.
* configure.in: Set em for arm*-*-symbianelf*.
* configure: Regenerated.
* config/tc-arm.c (elf32_arm_target_format): Use Symbian target
vectors when appropriate.
* config/te-symbian.h: New file.
* Makefile.am (ALL_EMULATIONS): Add earmsymbian.o.
(earmsymbian.c): New target.
* configure.tgt: Use armsymbian emulation for arm*-*-symbianelf*.
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.
* emulparams/armsymbian.sh: New file.
* acinclude.m4: Require AC_CANONICAL_TARGET, not AC_CANONICAL_SYSTEM.
Include ../config/acx.m4 and use ACX_NONCANONICAL_* where appropriate;
replace uses of *_alias with *_noncanonical.
* aclocal.m4: Rebuild with aclocal 1.4p6.
* Makefile.in: Rebuild with automake 1.4p6.
* doc/Makefile.in: Rebuild with automake 1.4p6.
* configure.in: Autoupdate with autoupdate 2.59.
* config.in: Regenerate with autoheader 2.59.
* configure: Regnerate with autoconf 2.59.
* bfd.c (bfd_get_synthetic_symtab): Pass counts and both symbol tables.
* elf-bfd.h (_bfd_elf_get_synthetic_symtab): Adjust.
* elf.c (_bfd_elf_get_synthetic_symtab): Adjust.
* libbfd-in.h (_bfd_nodynamic_get_synthetic_symtab): Adjust.
* targets.c (struct bfd_target <_bfd_get_synthetic_symtab>): Adjust.
* elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Don't read symbols.
Use both symbol tables on non-relocatable objects. Use a common
error exit. Fix "mid" warning.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
binutils/
* objdump.c (dump_bfd): Pass both symbol tables to
bfd_get_synthetic_symtab.
object file.
(struct sfpr_def_parms): Save some space.
(sfpr_define): Here too.
* elf64-ppc.c (compare_symbols): Put section syms first.
(sym_exists_at): New function.
(ppc64_elf_get_synthetic_symtab): Use relocs to find code entry
points only for relocatable files. Use .opd section contents
otherwise. Generally clean up the code.
LI_R12_0, STVX_VR0_R12_R0, LVX_VR0_R12_R0, MTLR_R0, SFPR_MAX): Define.
(struct sfpr_def_parms): New.
(sfpr_define): New function.
(savegpr0, savegpr0_tail, restgpr0, restgpr0_tail): New functions.
(savegpr1, savegpr1_tail, restgpr1, restgpr1_tail): New functions.
(savefpr, savefpr0_tail, restfpr, restfpr0_tail): New functions.
(savefpr1_tail, restfpr1_tail): New functions.
(savevr, savevr_tail, restvr, restvr_tail): New functions.
(MIN_SAVE_FPR, MAX_SAVE_FPR): Don't define.
(ppc64_elf_func_desc_adjust): Use sfpr_define in place of existing
code. Define all ABI mandated _save and _rest functions.
* elflink.c (bfd_elf_record_link_assignment): Add comment about
changing bfd_link_hash_undefined to bfd_link_hash_new.
* ldexp.c (fold_name): Don't call bfd_link_add_undef if the symbol
was already on the undefs list.
* elfxx-target.h (bfd_elfNN_get_synthetic_symtab): Only define
if not yet defined.
* elf64-ppc.c (bfd_elf64_get_synthetic_symtab): Define.
(synthetic_opd, synthetic_relocatable): New variables.
(compare_symbols, compare_relocs): New helper routines.
(ppc64_elf_get_synthetic_symtab): New function.
* bfd.c (bfd_get_synthetic_symtab): Rename dynsyms argument
to relsyms.
* bfd-in2.h: Regenerated.
* elf.c (_bfd_elf_get_synthetic_symtab): Rename dynsyms argument
to relsyms. Return 0 if abfd is relocatable.
binutils/
* objdump.c (dump_bfd): For relocatable objects, pass syms instead
of dynsyms to bfd_get_synthetic_symtab.
matches the requirements for an ARM mapping symbol name.
(arm_elf_find_function): New function based on elf_find_function in elf.c but
skipping ARM mapping symbols and including thumb function symbols.
(elf32_arm_find_nearest_line): Use arm_elf_find_function.
(elf32_arm_output_symbol_hook): Use is_arm_mapping_symbol_name.
(ppc64_elf_add_symbol_hook): Test for NULL section.
(get_sym_h): Formatting.
(ppc64_elf_size_stubs): Include reloc addend in value stored as
stub target_value.
* elf-bfd.h (_bfd_elf_gc_mark): Declare.
* elflink.c (elf_link_input_bfd): Formatting.
(_bfd_elf_gc_mark): Rename from elf_gc_mark and make global. Adjust
all callers.
* elf64-ppc.c (struct ppc_link_hash_entry): Remove is_entry.
(link_hash_newfunc): Don't set it.
(ppc64_elf_copy_indirect_symbol): Nor copy it.
(ppc64_elf_mark_entry_syms): Delete.
(ppc64_elf_gc_mark_hook): Mark entry syms here. Also mark opd
sections. Use get_opd_info.
* elf64-ppc.h (ppc64_elf_mark_entry_syms): Delete.
ld/
* emultempl/ppc64elf.em (ppc_after_open): Delete.
(LDEMUL_AFTER_OPEN): Don't define.
(func_desc_adjust): Don't set have_undefweak.
(ppc64_elf_func_desc_adjust): Don't add an extr nop to sfpr.
(ppc64_elf_relocate_section): NOP out calls to undefweak functions.
(adjust_opd_syms): Use get_opd_info. Define removed symbols as zero.
(ppc64_elf_edit_opd): Use get_opd_info. Check that sym has a dot
before calling get_fdh. Test fdh rather than h before dereferencing
fdh. Mark removed symbols in opd_adjust.
(ppc64_elf_tls_optimize): Don't bother with opd adjustment here.
(ppc64_elf_relocate_section): Use get_opd_info, and handle removed
opd symbols.
(ppc64_elf_output_symbol_hook): Likewise.
Nick Clifton <nickc@redhat.com>
PR 290
* bfd.c (_bfd_default_error_handler): Make it global.
* elf-bfd.h (elf_backend_data): Add link_order_error_handler.
* elf.c (assign_section_numbers): Cope gracefully with sections
which have SHF_LINK_ORDER set but no sh_link set up.
* elflink.c (elf_get_linked_section_vma): Likewise.
* elfxx-ia64.c (elf_backend_link_order_error_handler): New. Set
it to NULL.
* elfxx-target.h (elf_backend_link_order_error_handler): New.
Set it to _bfd_default_error_handler.
(elfNN_bed): Add elf_backend_link_order_error_handler.
* libbfd-in.h (_bfd_default_error_handler): New.
* libbfd.h: Regenerated.
* config.bfd (hppa*-*-netbsd*): Set targ_defvec to
bfd_elf32_hppa_nbsd_vec. Add bfd_elf32_hppa_linux_vec
to targ_selvecs.
* configure.in (bfd_elf32_hppa_nbsd_vec): Add case.
* configure: Regenerate.
* elf32-hppa.c (elf32_hppa_object_p): Add "elf32-hppa-netbsd"
case that accepts OSABI=NetBSD and OSABI=SysV.
(elf32_hppa_set_gp): For "elf32-hppa-netbsd", set the GP to
the base of .got or .data (if .got does not exist).
(elf32_hppa_post_process_headers): For elf32-hppa-netbsd,
set OSABI=NetBSD.
(TARGET_BIG_SYM): Add bfd_elf32_hppa_nbsd_vec case.
(TARGET_BIG_NAME): Add "elf32-hppa-netbsd" case.
* targets.c (bfd_elf32_hppa_nbsd_vec): Add extern declaration.
(_bfd_target_vector): Add bfd_elf32_hppa_nbsd_vec.
gas:
* config/tc-hppa.h (TARGET_FORMAT): Set to "elf32-hppa-netbsd"
for TE_NetBSD.
ld:
* emulparams/hppanbsd.sh (OUTPUT_FORMAT): Set to "elf32-hppa-netbsd".
2004-07-26 H.J. Lu <hongjiu.lu@intel.com>
* elf-bfd.h (bfd_elf_section_data): Add a pointer for the
linked-to section.
(elf_linked_to_section): New.
* elf.c (assign_section_numbers): Set up sh_link for
SHF_LINK_ORDER.
* elfxx-ia64.c (elfNN_ia64_final_write_processing): Set sh_info
to sh_link for SHT_IA_64_UNWIND sections.
gas/
2004-07-26 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-ia64.c (start_unwind_section): Set the linked-to
section.
(ia64_elf_section_change_hook): Set the linked-to section for
SHT_IA_64_UNWIND.
2004-07-22 H.J. Lu <hongjiu.lu@intel.com>
* elflink.c (elf_fixup_link_order): Issue a warning and flag
an error if failed.
ld/
2004-07-22 H.J. Lu <hongjiu.lu@intel.com>
* ld-scripts/crossref.exp: XFAIL ia64-*-* on the first test.
* elflink.c (_bfd_elf_symbol_refs_local_p): Use it to handle
common definitions.
* elf-m10300.c: Use SYMBOL_REFERENCES_LOCAL instead of
_bfd_elf_symbol_refs_local_p.
* elf32-frv.c (FRVFDPIC_SYM_LOCAL): Remove hack for common
symbols.
2004-07-19 H.J. Lu <hongjiu.lu@intel.com>
* bfd-in.h (dynamic_lib_link_class): Add DYN_NO_ADD_NEEDED and
DYN_NO_NEEDED.
(bfd_elf_get_dyn_lib_class): New prototype.
* elf.c (bfd_elf_get_dyn_lib_class): New function.
* elflink.c (elf_link_add_object_symbols): Check DYN_AS_NEEDED,
DYN_DT_NEEDED and DYN_NO_NEEDED bits to see if a DT_NEEDED
entry is needed. Issue an error if a DT_NEEDED entry is needed
for a file marked DYN_NO_NEEDED.
(elf_link_check_versioned_symbol): Check the DYN_DT_NEEDED bit
for DT_NEEDED tags.
* bfd-in2.h: Regenerated.
ld/
2004-07-19 H.J. Lu <hongjiu.lu@intel.com>
* emultempl/elf32.em (gld${EMULATION_NAME}_load_symbols): Also
check the add_needed field.
(dt_needed): New struct.
(gld${EMULATION_NAME}_try_needed): Change the first argument
to a pointer to struct dt_needed. Check the DYN_NO_ADD_NEEDED
bit in the file where the DT_NEEDED entry comes from.
(gld${EMULATION_NAME}_search_needed): Change the second
argument to a pointer to struct dt_needed.
(gld${EMULATION_NAME}_check_ld_so_conf): Updated.
(gld${EMULATION_NAME}_after_open): Likewise.
* ld.texinfo: Add --add-needed document.
* ldlang.c (new_afile): Set p->add_needed.
* ldlang.h (lang_input_statement_type): Add add_needed field.
* ldmain.h (add_needed): Declare.
* ldmain.c (add_needed): New global var.
* lexsup.c (option_values): Add OPTION_ADD_NEEDED and
OPTION_NO_ADD_NEEDED.
(ld_options): Likewise.
(parse_args): Handle them.
bfd:
* elf32-sh.c: Include ../opcodes/sh-opc.h .
* Makefile.am: Ran make dep-am .
* Makefile.in: Ran make dep-in .
gas:
* config/tc-sh.c (md_assemble): Change isspace to ISSPACE.
(md_parse_option): Remove redundant -isa testing.
Make bfd_arch variable const.
(md_show_usage): Make bfd_arch variable const.
* bfd/cofflink.c (_bfd_coff_generic_relocate_section): Resolve PE weak
externals properly.
* src/gas/config/obj-coff.c (obj_coff_weak): New .weak syntax for PE weak
externals.
* binutils/doc/binutils.texi (nm): Clarify weak symbol description.
* gas/config/tc-i386.c (tc_gen_reloc): Use addend for weak symbols in TE_PE.
* gas/doc/as.texinfo (Weak): Document PE weak symbols.
* ld/ld.texinfo (WIN32): Document PE weak symbols.
2004-06-30 H.J. Lu <hongjiu.lu@intel.com>
PR 233
* elflink.c (elf_link_input_bfd): Issue an error for non-debug
local references to discarded sections and report their
locations.
ld/testsuite/
2004-06-30 H.J. Lu <hongjiu.lu@intel.com>
PR 233
* ld-discard/extern.d: Updated.
* ld-discard/start.d: Likewise.
* ld-discard/static.d: Likewise.
(struct elf32_mn10300_link_hash_entry): Remove
pcrel_relocs_copied.
(mn10300_elf_check_relocs): Only reserve dynamic relocations for
R_MN10300_32. Don't adjust pcrel_relocs_copied.
(mn10300_elf_final_link_relocate): Fail for direct, pc-relative
and gotoff relocations if the symbol doesn't bind locally. Use
_bfd_elf_symbol_refs_local_p to test. Don't create dynamic
relocation for PCREL32.
(mn10300_elf_relocate_section): Use _bfd_elf_symbol_refs_local_p
to test whether a symbol binds locally.
(elf32_mn10300_link_hash_newfunc): Don't initialize
pcrel_relocs_copied.
(_bfd_mn10300_elf_discard_copies): Delete.
(_bfd_mn10300_elf_size_dynamic_sections): Don't call it.
* elf64-x86-64.c (elf64_x86_64_check_relocs): Warn overflow
relocation symbol.
(elf64_x86_64_relocate_section): Issue an error for
R_X86_64_PC8, R_X86_64_PC16 and R_X86_64_PC32 relocations
against global symbols when building shared library.
2004-06-14 Chris Demetriou <cgd@broadcom.com>
* elf32-mips.c (elf_mips_gnu_pcrel32): Add (undoing 2004-04-24
removal) with updated comment.
(bfd_elf32_bfd_reloc_type_lookup): Add back case for
BFD_RELOC_32_PCREL.
(mips_elf32_rtype_to_howto): Add back case for R_MIPS_PC32.
* elfxx-mips.c (mips_elf_calculate_relocation): Likewise.
[ include/elf/ChangeLog ]
2004-06-14 Chris Demetriou <cgd@broadcom.com>
* mips.h (R_MIPS_PC32): Add back (undoing removal on 2004-04-24),
with an updated comment.
bfd:
* Makefile.am: Regenerate dependencies.
* Makefile.in: Regenerate.
* archures.c: Add bfd_mach_sh3_nommu .
* bfd-in2.h: Regenerate.
* cpu-sh.c: Add sh3-nommu architecture.
(bfd_to_arch_table): Create new table.
(sh_get_arch_from_bfd_mach): Create new function.
(sh_get_arch_up_from_bfd_mach): Create new function.
(sh_merge_bfd_arch): Create new function.
* elf32-sh.c (sh_ef_bfd_table): Add table.
(sh_elf_check_relocs): Replace switch statement with
use of sh_ef_bfd_table .
(sh_elf_get_flags_from_mach): Add new function.
(sh_find_elf_flags): Likewise.
(sh_elf_copy_private_data): Replace most of non-elf contents
with a call to sh_merge_bfd_arch() .
gas:
* Makefile.am: Regenerate dependecies.
* Makefile.in: Regenerate.
* config/tc-sh.c (valid_arch): Make unsigned.
(preset_target_arch): Likewise.
(md_begin): Use new architecture flags system.
(get_specific): Likewise.
(assemble_ppi): Likewise.
(md_assemble): Likewise. Also fix error check for bad opcodes.
(md_parse_option): Likewise. Also generate -isa values according
to the table in bfd/cpu-sh.c instead of just constants. Also
allow <arch>-up ISA variants.
(sh_elf_final_processing): Replace if-else chain with a call to
sh_find_elf_flags().
* testsuite/gas/sh/arch: New directory.
* testsuite/gas/sh/arch/arch.exp: New test script.
* testsuite/gas/sh/arch/arch_expected.txt: New file.
* testsuite/gas/sh/arch/sh.s: New file.
* testsuite/gas/sh/arch/sh2.s: New file.
* testsuite/gas/sh/arch/sh-dsp.s: New file.
* testsuite/gas/sh/arch/sh2e.s: New file.
* testsuite/gas/sh/arch/sh3-nommu.s: New file.
* testsuite/gas/sh/arch/sh3.s: New file.
* testsuite/gas/sh/arch/sh3-dsp.s: New file.
* testsuite/gas/sh/arch/sh3e.s: New file.
* testsuite/gas/sh/arch/sh4-nommu-nofpu.s: New file.
* testsuite/gas/sh/arch/sh4-nofpu.s: New file.
* testsuite/gas/sh/arch/sh4.s: New file.
* testsuite/gas/sh/arch/sh4a-nofpu.s: New file.
* testsuite/gas/sh/arch/sh4al-dsp.s: New file.
* testsuite/gas/sh/arch/sh4a.s: New file.
include/elf:
* sh.h (EF_SH_HAS_DSP): Remove.
(EF_SH_HAS_FP): Remove.
(EF_SH_MERGE_MACH): Remove.
(EF_SH4_NOFPU): Convert to decimal.
(EF_SH4A_NOFPU): Likewise.
(EF_SH4_NOMMU_NOFPU): Likewise.
(EF_SH3_NOMMU): Add new macro.
(EF_SH_BFD_TABLE): Likewise.
(sh_find_elf_flags): Add prototype.
(sh_elf_get_flags_from_mach): Likewise.
opcodes:
* sh-dis.c (target_arch): Make unsigned.
(print_insn_sh): Replace (most of) switch with a call to
sh_get_arch_from_bfd_mach(). Also use new architecture flags system.
* sh-opc.h: Redefine architecture flags values.
Add sh3-nommu architecture.
Reorganise <arch>_up macros so they make more visual sense.
(SH_MERGE_ARCH_SET): Define new macro.
(SH_VALID_BASE_ARCH_SET): Likewise.
(SH_VALID_MMU_ARCH_SET): Likewise.
(SH_VALID_CO_ARCH_SET): Likewise.
(SH_VALID_ARCH_SET): Likewise.
(SH_MERGE_ARCH_SET_VALID): Likewise.
(SH_ARCH_SET_HAS_FPU): Likewise.
(SH_ARCH_SET_HAS_DSP): Likewise.
(SH_ARCH_UNKNOWN_ARCH): Likewise.
(sh_get_arch_from_bfd_mach): Add prototype.
(sh_get_arch_up_from_bfd_mach): Likewise.
(sh_get_bfd_mach_from_arch_set): Likewise.
(sh_merge_bfd_arc): Likewise.
ld:
* testsuite/ld-sh/arch/arch.exp: New test script.
* testsuite/ld-sh/arch/arch_expected.txt: New file.
* testsuite/ld-sh/arch/sh.s: New file.
* testsuite/ld-sh/arch/sh2.s: New file.
* testsuite/ld-sh/arch/sh-dsp.s: New file.
* testsuite/ld-sh/arch/sh2e.s: New file.
* testsuite/ld-sh/arch/sh3-nommu.s: New file.
* testsuite/ld-sh/arch/sh3.s: New file.
* testsuite/ld-sh/arch/sh3-dsp.s: New file.
* testsuite/ld-sh/arch/sh3e.s: New file.
* testsuite/ld-sh/arch/sh4-nommu-nofpu.s: New file.
* testsuite/ld-sh/arch/sh4-nofpu.s: New file.
* testsuite/ld-sh/arch/sh4.s: New file.
* testsuite/ld-sh/arch/sh4a-nofpu.s: New file.
* testsuite/ld-sh/arch/sh4al-dsp.s: New file.
* testsuite/ld-sh/arch/sh4a.s: New file.
custom calling conventions for dynamic symbols.
(mn10300_elf_relax_section): Avoid relaxing a function as a local
symbol if it's an alias to a global one.
* elf.c (_bfd_elf_make_section_from_shdr): Don't set SEC_EXCLUDE
for SHT_GROUP sections.
ld/
* ldlang.c (lang_add_section): Set SEC_EXCLUDE for SEC_GROUP
sections when doing a final link. Clear SEC_EXCLUDE when doing
a relocable link, except for SEC_DEBUGGING sections.
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Use the
same condition here to drop SEC_EXCLUDE orphan sections.
(mips_elf_higher, mips_elf_highest,
mips_elf_create_dynamic_relocation): Use MINUS_ONE and MINUS_TWO for
some bfd_vma values.
(_bfd_mips_elf_finish_dynamic_symbol): Likewise. Code cleanup.
Propagate IMAGE_FILE_LARGE_ADDRESS_AWARE.
* peXXigen.c (_bfd_XX_print_private_bfd_data_common): Recognize
IMAGE_FILE_LARGE_ADDRESS_AWARE. Use PE defines.
* configure: Rebuilt.
* targets.c (bfd_elf32_frvfdpic_vec): New.
* config.bfd: Enable it on frv-*-elf and frv-*-*linux*, as default
on the latter.
* elf32-frv.c: Prefix all identifiers added for FDPIC support with
frvfdpic instead of frv. Rearrange elf-target macros such that
the FDPIC-specific ones are only defined for this new target
vector.
(bfd_elf32_frvfdpic_vec): Declare.
(IS_FDPIC): New.
(elf32_frv_relocate_section): Use it to enable segment checking
and to control rofixup emission. Add output section vma to
applied relocation in non-LOAD non-ALLOC sections. Use
_bfd_error_handler for errors.
(_frv_create_got_section): Create .rel.got and .rofixup only in
FDPIC. Create non-dynamic _gp at .got+2048 in non-FDPIC, like the
linker script.
(elf32_frvfdpic_size_dynamic_sections): Assume FDPIC.
(elf32_frvfdpic_modify_segment_map): Likewise.
(elf32_frv_finish_dynamic_sections): New, do-nothing.
(elf32_frvfdpic_finish_dynamic_sections): Assume FDPIC. Improve
error message if we miscompute the rofixup size.
(frvfdpic_elf_use_relative_eh_frame): Assume FDPIC.
(frvfdpic_elf_encode_eh_address): Likewise.
(elf32_frv_check_relocs): Reject FDPIC-only relocs in non-FDPIC.
Record relocs only in FDPIC. Make sure _gp is defined for GPREL
relocs. Reject unknown relocation types.
(elf32_frv_object_p): Make sure target vector matches FDPIC bits.
(frv_elf_merge_private_bfd_data): Likewise.
(ELF_MAXPAGESIZE): Revert to 0x1000 for elf32-frv; keep it as
0x4000 for newly-added elf32-frvfdpic.
* elf.c (bfd_section_from_shdr): Maintain the section order in
a section group.
(special_sections): Add ".note.GNU-stack".
(elf_fake_sections): Handle section group for relocatable
link..
dup_common fields.
(setup_sections): Use som_subspace_dictionary_record struct instead
subspace_dictionary_record. Set SEC_LINK_ONCE if subspace is
is_comdat, is_common or dup_common.
(som_prep_headers): Use som_subspace_dictionary_record struct. Set
is_comdat, is_common and dup_common in section subspace_dict from
copy_data.
(som_begin_writing): Use som_subspace_dictionary_record struct.
(som_finish_writing): Likewise.
(som_bfd_derive_misc_symbol_info): Add support to set is_comdat,
is_common and dup_common flags in info for symbol. Add comment
regarding linker support for these fields. Slightly reorganize
function.
(som_build_and_write_symbol_table): Set is_comdat, is_common and
dup_common fields in symbol table from symbol info.
(bfd_som_set_subsection_attributes): Add comdat, common and dup_common
arguments. Set corresponding fields in copy_data. Change all callers.
(som_bfd_ar_write_symbol_stuff): Set dup_common flag in library
symbol table.
(som_vec): Add SEC_LINK_ONCE to applicable section flags.
* som.h (som_subspace_dictionary_record): Define.
(som_copyable_section_data_struct): Add is_comdat, is_common and
dup_common fields.
(som_section_data_struct): Use som_subspace_dictionary_record struct
instead of subspace_dictionary_record.
(bfd_boolean bfd_som_set_subsection_attributes): Adjust prototype.
* config/obj-som.c (obj_som_init_stab_section): Add new arguments in
call to obj_set_subsection_attributes.
(obj_som_init_stab_section): Likewise.
* config/tc-hppa.c (default_subspace_dict): Add comdat field.
(pa_def_subspaces): Provide comdat default.
(pa_subspace): Handle new "comdat" parameter. Set SEC_LINK_ONCE and
not SEC_IS_COMMON if section is comdat, common or dup_common. Update
calls to create_new_subspace and update_subspace to pass comdat flag.
(create_new_subspace, update_subspace): Add new comdat argument. Use
it in calls to obj_set_subsection_attributes.
* doc/c-hppa.texi (.subspa, .nsubspa): Document new comdat parameter
and use of comdat, common and dup_comm parameters.
if set. Check reloc_done flag before applying relocations. Use
output addresses, both when applying relocations and when comparing
against the specified section.
(elf_xtensa_relocate_section): Use output address to check if dynamic
reloc is in a literal pool. Set section's reloc_done flag.
* elf32-sh64.c (elf_backend_section_flags): New. Defined.
(sh64_elf_set_mach_from_flags): Remove the kludge for .cranges
section.
(sh64_elf_section_flags): New. Set SEC_DEBUGGING for .cranges
section.
2004-04-23 Chris Demetriou <cgd@broadcom.com>
* coff-mips.c (mips_relhi_reloc, mips_rello_reloc)
(mips_switch_reloc, mips_read_relocs, mips_relax_section)
(mips_relax_pcrel16, PCREL16_EXPANSION_ADJUSTMENT): Remove.
(mips_relocate_hi): Remove now-unused 'adjust' and 'pcrel' arguments,
and update comments to reflect current usage.
(mips_howto_table): Remove entries for MIPS_R_RELHI, MIPS_R_RELLO,
and MIPS_R_SWITCH, as well as several empty entries. Update comment
for MIPS_R_PCREL16.
(mips_ecoff_swap_reloc_in, mips_ecoff_swap_reloc_out)
(mips_adjust_reloc_out, mips_bfd_reloc_type_lookup): Remove support
for MIPS_R_SWITCH, MIPS_R_RELLO, and MIPS_R_RELHI relocations.
(mips_adjust_reloc_in): Likewise, adjust maximum accepted relocation
type number to be MIPS_R_PCREL16.
(mips_relocate_section): Remove support for link-time relaxation
of branches used by embedded-PIC. Remove support for MIPS_R_SWITCH,
MIPS_R_RELLO, and MIPS_R_RELHI relocations.
(_bfd_ecoff_bfd_relax_section): Redefine to bfd_generic_relax_section.
* ecoff.c (ecoff_indirect_link_order): Remove support for link-time
relaxation of branches used by embedded-PIC.
* ecofflink.c (bfd_ecoff_debug_accumulate): Likewise.
* libecoff.h (struct ecoff_section_tdata): Remove embedded-PIC
related members, update comment.
* pe-mips.c: Remove disabled (commented-out and #if 0'd)
code related to embedded-PIC.
* elfxx-mips.c (_bfd_mips_elf_read_ecoff_info): Remove
initialization of now-removed 'adjust' member of
'struct ecoff_debug_info'.
[ include/coff/ChangeLog ]
2004-04-23 Chris Demetriou <cgd@broadcom.com>
* mips.h (MIPS_R_RELHI, MIPS_R_RELLO, MIPS_R_SWITCH): Remove
(MIPS_R_PCREL16): Update comment.
* ecoff.h (struct ecoff_value_adjust): Remove structure.
(struct ecoff_debug_info): Remove 'adjust' member.
* elf32-arm.h (elf32_arm_check_relocs): Don't output REL32
relocs for locally defined symbols during -shared final link.
(elf32_arm_final_link_relocate): Likewise.
ELF_LINK_POINTER_EQUALITY_NEEDED.
(elf64_x86_64_check_relocs): Set ELF_LINK_POINTER_EQUALITY_NEEDED
if r_type is not R_X86_64_PC32.
(elf64_x86_64_finish_dynamic_symbol): If
ELF_LINK_POINTER_EQUALITY_NEEDED is not set, clear st_value of
SHN_UNDEF symbols.
* elf32-sh.c (sh_elf_plt_sym_val): New function.
(elf_backend_plt_sym_val): Define.
opcodes/
* sh-dis.c (print_insn_sh): Print the value in constant pool
as a symbol if it looks like a symbol.
gas/testsuite/
* gas/sh/pcrel2.d: Update.
* gas/sh/tlsd.d: Update.
* gas/sh/tlsnopic.d: Update.
* gas/sh/tlspic.d: Update.
ld/testsuite/
* ld-sh/tlsbin-1.d: Update
* ld-sh/tlspic-1.d: Update.
require relocations against a weak symbol to reference the same
symbol hash entry if not a final, static link.
(get_cached_value, add_value_map): Add final_static_link argument.
(remove_literals): Pass final_static_link argument as needed.
(bfd_elf_gc_sections): Fail if a shared object is being created.
Do not fail if dynamic sections have been created. Instead call
elf_gc_mark_dynamic_ref_symbol to mark sections that contain
dynamically referenced symbols. Do not mark the whole graph
rooted at .eh_frame, only the section proper.
