A while ago, back when GDB was a C program, the sect_offset and
cu_offset types were made structs in order to prevent incorrect mixing
of those offsets. Now that we require C++11, we can make them
integers again, while keeping the safety, by exploiting "enum class".
We can add a bit more safety, even, by defining operators that the
types _should_ support, helping making the suspicious uses stand out
more.
Getting at the underlying type is done with the new to_underlying
function added by the previous patch, which also helps better spot
where do we need to step out of the safety net. Mostly, that's around
parsing the DWARF, and when we print the offset for complaint/debug
purposes. But there are other occasional uses.
Since we have to define the sect_offset/cu_offset types in a header
anyway, I went ahead and generalized/library-fied the idea of "offset"
types, making it trivial to add more such types if we find a use. See
common/offset-type.h and the DEFINE_OFFSET_TYPE macro.
I needed a couple generaly-useful preprocessor bits (e.g., yet another
CONCAT implementation), so I started a new common/preprocessor.h file.
I included units tests covering the "offset" types API. These are
mostly compile-time tests, using SFINAE to check that expressions that
shouldn't compile (e.g., comparing unrelated offset types) really are
invalid and would fail to compile. This same idea appeared in my
pending enum-flags revamp from a few months ago (though this version
is a bit further modernized compared to what I had posted), and I plan
on reusing the "check valid expression" bits added here in that
series, so I went ahead and defined the CHECK_VALID_EXPR macro in its
own header -- common/valid-expr.h. I think that's nicer regardless.
I was borderline between calling the new types "offset" types, or
"index" types, BTW. I stuck with "offset" simply because that's what
we're already calling them, mostly.
gdb/ChangeLog:
2017-04-04 Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/offset-type-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add offset-type-selftests.o.
* common/offset-type.h: New file.
* common/preprocessor.h: New file.
* common/traits.h: New file.
* common/valid-expr.h: New file.
* dwarf2expr.c: Include "common/underlying.h". Adjust to use
sect_offset and cu_offset strong typedefs throughout.
* dwarf2expr.h: Adjust to use sect_offset and cu_offset strong
typedefs throughout.
* dwarf2loc.c: Include "common/underlying.h". Adjust to use
sect_offset and cu_offset strong typedefs throughout.
* dwarf2read.c: Adjust to use sect_offset and cu_offset strong
typedefs throughout.
* gdbtypes.h: Include "common/offset-type.h".
(cu_offset): Now an offset type (strong typedef) instead of a
struct.
(sect_offset): Likewise.
(union call_site_parameter_u): Rename "param_offset" field to
"param_cu_off".
* unittests/offset-type-selftests.c: New file.
This should help catch mistakes related to mixing the 1-based DWARF
indexes with 0-based std::vector indexes, since the new types do not
implicitly convert to anything.
The change in read_formatted_entries relates to the fact that doing
the seemingly simpler:
- uintp = &fe.dir_index;
+ uintp = (unsigned int *) &fe.dir_index;
would be undefined C/C++. So to address that, I made the function
extract the form before assigning to the file_entry. It felt natural
to use gdb::optional for "do I have this value", and this is what
motivated the previous patch that added the missing observer methods
to gdb::optional.
gdb/ChangeLog:
2017-04-04 Pedro Alves <palves@redhat.com>
* common/underlying.h: New file.
* dwarf2read.c: Include "common/gdb_optional.h" and
"common/underlying.h".
(dir_index, file_name_index): New types.
(file_entry): Use them.
(file_entry::include): Use to_underlying.
(line_header::add_file_name): Use dir_index.
(read_formatted_entries): Use gdb::optional. Read form before
writting to file_entry.
(dwarf_decode_line_header): Use dir_index.
(lnp_state_machine::current_file): Use to_underlying.
(lnp_state_machine::file): Change type to file_name_index.
(dwarf_record_line): Use to_underlying.
(init_lnp_state_machine): Use file_name_index.
(dwarf_decode_lines_1): Use dir_index and file_name_index.
Currently, gdb::optional is really minimal and can only be used for
lazy initialization. There's no way to get at the value contained
inside the optinal. This commit corrects that, by adding observer
methods, mostly copied from libstdc++'s implementation of C++17
std::optional.
This will be used in the following patch.
gdb/ChangeLog:
2017-04-04 Pedro Alves <palves@redhat.com>
* common/gdb_optional.h (gdb::optiona): Add operator->, operator*,
operator bool, has_value and get methods.
This starts off as replacing a couple custom open coded vector
implementations in the file with std::vector, and then the rest falls
off of that. I.e., use new/delete instead of XCNEW/xfree, add
ctors/dtors/initializers where appropriate. And then use
std::unique_ptr instead of cleanups. Some functions became methods,
and in a couple spots, some single-use callback functions that would
have to be tweaked anyway are converted to lambdas instead.
gdb/ChangeLog:
2017-04-04 Pedro Alves <palves@redhat.com>
* dwarf2read.c (struct file_entry): Add ctors, and initialize all
fields.
(line_header): Initialize all data fields. Change type of
standard_opcode_lengths to std::unique_ptr<unsigned char[]>.
Change type of include_dirs to std::vector<const char *>. Remove
num_include_dirs, include_dirs_size. Change type of file_names to
std::vector<file_entry>. Remove num_file_names, file_names_size.
(line_header::line_header): New.
(line_header::add_include_dir, line_header::add_file_name): New
methods.
(line_header::include_dir_at): Remove NULL check.
(line_header::file_name_at): Add const overload.
(line_header_up): New unique_ptr typedef.
(dw2_get_file_names_reader): Use line_header_up. Adjust to use
std::vector. Remove free_line_header call.
(dwarf2_build_include_psymtabs): Use line_header_up. Remove
free_line_header call.
(free_cu_line_header): Delete.
(handle_DW_AT_stmt_list, handle_DW_AT_stmt_list)
(setup_type_unit_groups): Use line_header_up instead of cleanups.
Adjust to use std::vector.
(free_line_header): Delete.
(free_line_header_voidp): Use delete.
(add_include_dir): Replace with ...
(line_header::add_include_dir): ... this method. Use std::vector.
(add_file_name): Replace with ...
(line_header::add_file_name): ... this method. Use std::vector.
(add_include_dir_stub): Delete.
(read_formatted_entries): Remove memset.
(dwarf_decode_line_header): Return a line_header_up instead of a
raw pointer. Remove cleanup handling. Pass lambdas to
read_formatted_entries. Adjust to use line_header methods.
(dwarf_decode_lines_1): Adjust to use line_header methods.
(dwarf_decode_lines, file_file_name, file_full_name): Adjust to
use std::vector.
Use symbolic constants from include/coff/internal.h instead of magic numbers
with add_data_entry()
bfd/ChangeLog:
2017-04-02 Jon Turney <jon.turney@dronecode.org.uk>
(_bfd_XXi_swap_aouthdr_out): For clarity, use defines rather than
numbers for DataDirectory entry indicies passed to
add_data_entry().
Mark an ALLOC section, which should be placed in special memory area,
with SHF_GNU_MBIND. Its sh_info field indicates the special memory
type. GNU_MBIND section names start with ".mbind" so that they are
placed as orphan sections by linker. All input GNU_MBIND sections
with the same sh_type, sh_flags and sh_info are placed in one output
GNU_MBIND section. In executable and shared object, create a
GNU_MBIND segment for each GNU_MBIND section and its segment type is
PT_GNU_MBIND_LO plus the sh_info value. Each GNU_MBIND segment is
aligned at page boundary.
The assembler syntax:
.section .mbind.foo,"adx",%progbits
^ 0: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.foo,"adx",%progbits,0x1
^ 1: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2
^ 2: Special memory type.
|
'd' for SHF_GNU_MBIND.
bfd/
* elf.c (get_program_header_size): Add a GNU_MBIND segment for
each GNU_MBIND section and align GNU_MBIND section to page size.
(_bfd_elf_map_sections_to_segments): Create a GNU_MBIND
segment for each GNU_MBIND section.
(_bfd_elf_init_private_section_data): Copy sh_info from input
for GNU_MBIND section.
binutils/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX.
(get_elf_section_flags): Handle SHF_GNU_MBIND.
(process_section_headers): Likewise.
* testsuite/binutils-all/mbind1.s: New file.
* testsuite/binutils-all/objcopy.exp: Run readelf test on
mbind1.s.
gas/
* NEWS: Mention support for ELF SHF_GNU_MBIND.
* config/obj-elf.c (section_match): New.
(get_section): Match both sh_info and group name.
(obj_elf_change_section): Add argument for sh_info. Pass both
sh_info and group name to get_section. Issue an error for
SHF_GNU_MBIND section without SHF_ALLOC. Set sh_info.
(obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'.
(obj_elf_section): Support SHF_GNU_MBIND section info.
* config/obj-elf.h (obj_elf_change_section): Add argument for
sh_info.
* config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texinfo: Document 'd' for SHF_GNU_MBIND.
* testsuite/gas/elf/elf.exp: Run section12a, section12b and
section13.
* testsuite/gas/elf/section10.d: Updated.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section12.s: New file.
* testsuite/gas/elf/section12a.d: Likewise.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.l: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.s: Likewise.
include/
* elf/common.h (PT_GNU_MBIND_NUM): New.
(PT_GNU_MBIND_LO): Likewise.
(PT_GNU_MBIND_HI): Likewise.
(SHF_GNU_MBIND): Likewise.
ld/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place
input GNU_MBIND sections with the same type, attributes and
sh_info field into a single output GNU_MBIND section.
* testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b.
* testsuite/ld-elf/mbind1.s: New file.
* testsuite/ld-elf/mbind1a.d: Likewise.
* testsuite/ld-elf/mbind1b.d: Likewise.
* testsuite/ld-elf/mbind1c.d: Likewise.
* testsuite/ld-elf/mbind2a.s: Likewise.
* testsuite/ld-elf/mbind2b.c: Likewise.
We missed a "_gp" when changing the GP symbol. To make sure that
doesn't happen again, we now use the same definition everywhere (thanks,
Nick).
include/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* elf/riscv.h (RISCV_GP_SYMBOL): New define.
bfd/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* elfnn-riscv.c (GP_NAME): Delete.
(riscv_global_pointer_value): Change GP_NAME to RISCV_GP_SYMBOL.
(_bfd_riscv_relax_lui): Likewise.
opcodes/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* riscv-dis.c (riscv_disassemble_insn): Change "_gp" to
RISCV_GP_SYMBOL.
In some situations, the dependency tracking files in .deps can refer to
source files that were removed or renamed, leading to errors like:
make: *** No rule to make target `version.c', needed by `version.o'. Stop.
This patch makes the clean target clear the .deps directory, which gives
the user a chance to recover from the error wihtout knowing about the
internals of the build system.
It is already done for GDB. See here for more details:
https://sourceware.org/ml/gdb-patches/2009-03/msg00000.html
gdb/gdbserver/ChangeLog:
* Makefile.in (clean): Clear .deps.
It's the only place in the codebase that uses "struct ptid", so change
it to ptid_t for consistency.
gdb/ChangeLog:
* remote.c (set_general_thread, set_continue_thread): Use ptid_t
instead of struct ptid.
PR binutils/21342
* elflink.c (_bfd_elf_define_linkage_sym): Prevent null pointer
dereference.
(bfd_elf_final_link): Only initialize the extended symbol index
section if there are extended symbol tables to list.
Without this patch, passing "-march=rv64ic -march=rv64i" results in
you getting a "RV64IC" toolchain, which isn't expected.
gas/ChangeLog:
2017-03-30 Palmer Dabbelt <palmer@dabbelt.com>
* config/tc-riscv.c (riscv_clear_subsets): New function.
(riscv_add_subset): Call riscv_clear_subsets and riscv_set_rvc to
clear RVC when it's been previously set.
I noticed that there were some missing files in gdbserver's gitignore
(some generated register format .c files). Of course the easy fix would
be to add those files to .gitignore, but I think we can do a better job,
so that we don't have to worry about adding generated files to
.gitignore or the clean Makefile target.
I suggest naming all generated source files -generated.c. This way, we
can use a single rule in .gitignore and do a "rm -f *-generated.c" to
clean them up.
New in v2:
- Don't rename version.o and xml-builtin.o
gdb/gdbserver/ChangeLog:
* .gitignore: Remove generated files, replace with wildcard.
* (clean): Replace removal of generated files with wildcard.
(version.c): Replace with...
(version-generated.c): ...this.
(xml-builtin.c): Replace with...
(xml-builtin-generated.c): ...this.
(%-ipa.o: %-generated.c, %.o: %-generated.c): New rules.
(%.c: *regformats*): Replace with...
(%-generated.c: *regformats*): ...this.
The two-tier lexer in gdb/d-exp.y, which resolves fully qualified names
missed a case where `module.type' was not being classified as one token.
And so when the grammar takes over, it matched the remaining tokens
against the rule `TypeExp . IdentifierExp', where we were expecting to
instead match cast expression `( TypeExp ) UnaryExpression'.
Adding a case for TYPE_CODE_MODULE in type_aggregate_p means that
classify_inner_name will get a chance to lookup the symbol.
This was noticed when using `watch -l', and got the rather confusing
response:
A syntax error in expression, near `) 0x0add4e55'.
So it's been included in the testsuite, along with another test that
does effectively the same expression, but explicitly.
gdb/ChangeLog:
* d-exp.y (type_aggregate_p): Treat TYPE_CODE_MODULE as being
aggregate-like.
gdb/testsuite/ChangeLog:
* gdb.dlang/watch-loc.c: New file.
* gdb.dlang/watch-loc.exp: New file.
$ gdb rustc
Reading symbols from rustc...Reading symbols from /usr/lib/debug/usr/bin/rustc.debug...done.
done.
warning: Invalid entry in .debug_gdb_scripts section
/usr/bin/rustc
Section Headers:
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[15] .debug_gdb_scripts PROGBITS 00000000000008ed 0008ed 000022 00 AMS 0 0 1
/usr/lib/debug/usr/bin/rustc.debug
Section Headers:
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[15] .debug_gdb_scripts NOBITS 00000000000008ed 000280 000022 00 AMS 0 0 1
There remains questionable whether bfd_get_section_by_name() should not return
an error for !SEC_LOAD but I haven't investigated that.
gdb/ChangeLog
2017-03-29 Jan Kratochvil <jan.kratochvil@redhat.com>
* auto-load.c (auto_load_section_scripts): Check SEC_HAS_CONTENTS.
gdb/testsuite/ChangeLog
2017-03-29 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.python/py-section-script.exp (sepdebug): New testcases.
This patch adds constructor and destructor to thread_info.
gdb:
2017-03-29 Yao Qi <yao.qi@linaro.org>
* gdbthread.h (struct thread_info): Declare constructor and
destructor. Add some in-class member initializers.
* thread.c (free_thread): Remove.
(init_thread_list): Call delete instead of free_thread.
(new_thread): Call thread_info constructor.
(thread_info::thread_info): New function.
(thread_info::~thread_info): New function.
(delete_thread_1): Call delete instead of free_thread.
(make_cleanup_restore_current_thread): Move tp and frame to
inner block.
This adds -Mraw for PowerPC objdump, a disassembler option to display
the underlying machine instruction rather than aliases. For example,
"rlwinm" always rather than "rotlwi" when the instruction is
performing a simple rotate.
binutils/
* doc/binutils.texi (objdump): Document PowerPC -M options.
gas/
* config/tc-ppc.c (md_parse_option): Reject -mraw.
include/
* opcode/ppc.h (PPC_OPCODE_RAW): Define.
(PPC_OPCODE_*): Make them all unsigned long long constants.
opcodes/
* ppc-dis.c (ppc_opts): Set PPC_OPCODE_PPC for "any" flags. Add
"raw" option.
(lookup_powerpc): Don't special case -1 dialect. Handle
PPC_OPCODE_RAW.
(print_insn_powerpc): Mask out PPC_OPCODE_ANY on first
lookup_powerpc call, pass it on second.
PR binutils/18025
* coff-bfd.h (struct coff_section_data): Add new fields:
saved_bias and bias.
* coffgen.c (coff_find_nearest_line_with_names): Cache the bias
computed for PE binaries.
* dwarf2.c (scan_unit_for_symbols): Only warn once about each
missing abbrev.
Add a prologue analysis that recognizes all instructions that may happen in
compiler-generated prologue, including various stores, core register moves,
subtraction and ENTER_S instruction that does a lot of prologue actions through
microcode.
Testcases cover various prologue scenarios, including instructions that are
spread across multiple 16-bit encodings (for example there are 7 encodings of
store instruction).
gdb/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* arc-tdep.c (arc_frame_cache): Add support for prologue analysis.
(arc_skip_prologue): Likewise.
(arc_make_frame_cache): Likewise.
(arc_pv_get_operand): New function.
(arc_is_in_prologue): Likewise.
(arc_analyze_prologue): Likewise.
(arc_print_frame_cache): Likewise.
(MAX_PROLOGUE_LENGTH): New constant.
gdb/doc/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* gdb.texinfo (Synopsys ARC): Document "set debug arc 2".
gdb/testsuite/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* gdb.arch/arc-analyze-prologue.S: New file.
* gdb.arch/arc-analyze-prologue.exp: Likewise.
Add disassembler helper for GDB, that uses opcodes structure arc_instruction
and adds convenience functions to handle instruction operands. This interface
solves at least those problems with arc_instruction:
* Some instructions, like "push_s", have implicit operands which are not
directly present in arc_instruction.
* Operands of particular meaning, like branch/jump targets, have various
locations and meaning depending on type of branch/target.
* Access to operand value is abstracted into a separate function, so callee
code shouldn't bother if operand value is an immediate value or in a
register.
Testcases included in this commit are fairly limited - they test exclusively
branch instructions, something that will be used in software single stepping.
Most of the other parts of this disassembler helper are tested during prologue
analysis testing.
gdb/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* configure.tgt: Add arc-insn.o.
* arc-tdep.c (arc_delayed_print_insn): Make non-static.
(dump_arc_instruction_command): New function.
(arc_fprintf_disasm): Likewise.
(arc_disassemble_info): Likewise.
(arc_insn_get_operand_value): Likewise.
(arc_insn_get_operand_value_signed): Likewise.
(arc_insn_get_memory_base_reg): Likewise.
(arc_insn_get_memory_offset): Likewise.
(arc_insn_get_branch_target): Likewise.
(arc_insn_dump): Likewise.
(arc_insn_get_linear_next_pc): Likewise.
* arc-tdep.h (arc_delayed_print_insn): Add function declaration.
(arc_disassemble_info): Likewise.
(arc_insn_get_branch_target): Likewise.
(arc_insn_get_linear_next_pc): Likewise.
* NEWS: Mention new "maint print arc arc-instruction".
gdb/doc/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* gdb.texinfo (Synopsys ARC): Add "maint print arc arc-instruction".
gdb/testsuite/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* gdb.arch/arc-decode-insn.S: New file.
* gdb.arch/arc-decode-insn.exp: Likewise.
Add an "arc" sublist to "maintenance print" command list. The list is empty
for now, its purpose is to contain commands that print internal state of some
ARC-specific structures.
gdb/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* arc-tdep (maintenance_print_arc_list): New variable.
(maintenance_print_arc_command): New function.
Add ARC_LIMM_REGNUM to arc_regnum enumeration and assign a number 62 to it.
This ensures that for core registers internal register numbers in this enum are
the same as architectural numbers. This allows to use internal register
numbers in the contexts where architectural number is implied, for example when
disassembling instruction during prologue analysis.
gdb/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* arc-tdep.c (core_v2_register_names, core_arcompact_register_names)
Add "limm" and "reserved".
(arc_cannot_fetch_register, arc_cannot_store_register): Add
ARC_RESERVED_REGNUM and ARC_LIMM_REGNUM.
* arc-tdep.h (arc_regnum): Likewise.
Provide aceess to the THREADPTR register to remote gdb.
gdb/gdbserver/
2017-03-27 Max Filippov <jcmvbkbc@gmail.com>
* linux-xtensa-low.c (regnum::R_THREADPTR): New enum member.
(xtensa_fill_gregset): Call collect_register_by_name for
threadptr register.
(xtensa_store_gregset): Call supply_register_by_name for
threadptr register.
There are no a0-a15 pseudoregisters at the top of the register set in
call0 registers layout. All registers above gdbarch_num_regs (gdbarch)
are privileged. Treat them as such. This fixes the following gdb
assertion seen when 'finish' command is invoked:
regcache.c:649: internal-error: register_status
regcache_raw_read(regcache*, int, gdb_byte*):
Assertion `regnum >= 0 && regnum < regcache->descr->nr_raw_registers'
failed.
gdb/
2017-03-27 Max Filippov <jcmvbkbc@gmail.com>
* xtensa-tdep.c (xtensa_pseudo_register_read): Treat all
registers above gdbarch_num_regs (gdbarch) as privileged in
call0 ABI.
Correctly handle a0- registers on requests from remote gdb. This fixes
'Register 1 is not available'
and subsequent assertion in the remote gdb connecting to the gdbserver:
'findvar.c:291: internal-error: value_of_register_lazy:
Assertion `frame_id_p(get_frame_id (frame))' failed.'
The register structure is the same for windowed and call0 ABIs because
currently linux kernel internally requires windowed registers, so they
are always present.
gdb/gdbserver/
2017-03-27 Max Filippov <jcmvbkbc@gmail.com>
* linux-xtensa-low.c (xtensa_fill_gregset): Call collect_register
for all registers in a0_regnum..a0_regnum + C0_NREGS range.
(xtensa_store_gregset): Call supply_register for all registers in
a0_regnum..a0_regnum + C0_NREGS range.
Correctly handle a0- registers. This allows debugging call0 code in
linux natively.
The register structure is the same for windowed and call0 ABIs because
currently linux kernel internally requires windowed registers, so they are
always present.
gdb/
2017-03-27 Max Filippov <jcmvbkbc@gmail.com>
* xtensa-linux-nat.c (fill_gregset): Call regcache_raw_collect
for a single specified register or for all registers in
a0_base..a0_base + C0_NREGS range.
(supply_gregset_reg): Call regcache_raw_supply for a single
specified register or for all registers in a0_base..a0_base +
C0_NREGS range.
Both gdb and gdbserver need this definition to properly work with call0
ABI. Make it available to both.
gdb/
2017-03-27 Max Filippov <jcmvbkbc@gmail.com>
* arch/xtensa.h (C0_NREGS): Add definition.
* xtensa-tdep.c (C0_NREGS): Remove definition.
This fixes segfault in native gdb because isa is not initialized at the
point of call to xtensa_isa_maxlength.
gdb/
2017-03-27 Max Filippov <jcmvbkbc@gmail.com>
* xtensa-tdep.c (xtensa_scan_prologue, call0_analyze_prologue):
Drop xtensa_default_isa initialization.
(xtensa_gdbarch_init): Initialize xtensa_default_isa.
