-fsanitize=undefined complains about using operator~ on various enum
types that are used with DEF_ENUM_FLAGS_TYPE. This patch fixes these
problems by explicitly setting the base type for these enums to
unsigned. It also adds a static assert to enum_flags to ensure that
future enums used this way have an unsigned underlying type.
gdb/ChangeLog
2018-10-03 Tom Tromey <tom@tromey.com>
* common/enum-flags.h (enum_flags::operator~): Add static assert.
* symfile-add-flags.h (enum symfile_add_flag): Use unsigned as
base type.
* objfile-flags.h (enum objfile_flag): Use unsigned as base type.
* gdbtypes.h (enum type_instance_flag_value): Use unsigned as base
type.
* c-lang.h (enum c_string_type_values): Use unsigned as base
type.
* btrace.h (enum btrace_thread_flag): Use unsigned as base type.
This changes dwarf2_frame_state_reg_info::reg to be a std::vector.
This avoids passing NULL to memcpy in the copy constructor when the
original object does not have any registers.
gdb/ChangeLog
2018-10-03 Tom Tromey <tom@tromey.com>
* dwarf2-frame.h (dwarf2_frame_state_reg_info)
<~dwarf2_frame_state_reg_info>: Update.
<dwarf2_frame_state_reg_info>: Update.
<alloc_regs>: Add assertion. Update.
<reg>: Now a std::vector.
<num_regs>: Remove.
<swap>: Update.
* dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program)
(execute_cfa_program_test, dwarf2_frame_cache): Update.
-fsanitize=undefined pointed out a spot that passes NULL to memcpy,
which is undefined behavior according to the C standard.
gdb/ChangeLog
2018-10-03 Tom Tromey <tom@tromey.com>
* namespace.c (add_using_directive): Don't pass NULL to memcpy.
Add testcases to verify that all SHT_NOTE sections with the same section
alignment are placed in a single PT_NOTE segment.
PR ld/23658
* testsuite/ld-elf/pr23658-1.d: New file.
* testsuite/ld-elf/pr23658-1a.s: Likewise.
* testsuite/ld-elf/pr23658-1b.s: Likewise.
* testsuite/ld-elf/pr23658-1c.s: Likewise.
* testsuite/ld-elf/pr23658-1d.s: Likewise.
* testsuite/ld-elf/pr23658-2.rd: Likewise.
* testsuite/ld-elf/pr23658-3.d: Likewise.
* testsuite/ld-elf/pr23658-3.s: Likewise.
* testsuite/ld-elf/pr23658-3.t: Likewise.
* testsuite/ld-elf/shared.exp: Run PR ld/23658 tests.
To support putting all adjacent SHT_NOTE sections with the same section
alignment into a single PT_NOTE segment, lang_insert_orphan must group
and sort output note sections by section alignments in both output
section list as well as output section statement list.
PR ld/23658
* ldlang.c (lang_insert_orphan): Group and sort output note
sections by section alignments.
Alignments of SHT_NOTE sections can be 8 bytes for 64-bit ELF files. We
should put all adjacent SHT_NOTE sections with the same section alignment
into a single PT_NOTE segment even when the section alignment != 4 bytes.
Also check SHT_NOTE section type instead of section name.
PR ld/23658
* elf.c (get_program_header_size): Put all adjacent SHT_NOTE
sections with the same section alignment into a single PT_NOTE
segment. Check SHT_NOTE section type instead of section name.
(_bfd_elf_map_sections_to_segments): Likewise.
This patch adds the tests and expected output for each of the conditions where
the MOVPRFX constraint should apply.
The specific test cases are all documented to indicate what the expected
behavior should be.
gas/
* testsuite/gas/aarch64/sve-movprfx_1.d: New test.
* testsuite/gas/aarch64/sve-movprfx_1.s: New test.
* testsuite/gas/aarch64/sve-movprfx_10.d: New test.
* testsuite/gas/aarch64/sve-movprfx_10.l: New test.
* testsuite/gas/aarch64/sve-movprfx_10.s: New test.
* testsuite/gas/aarch64/sve-movprfx_11.d: New test.
* testsuite/gas/aarch64/sve-movprfx_11.s: New test.
* testsuite/gas/aarch64/sve-movprfx_12.d: New test.
* testsuite/gas/aarch64/sve-movprfx_12.s: New test.
* testsuite/gas/aarch64/sve-movprfx_13.d: New test.
* testsuite/gas/aarch64/sve-movprfx_13.l: New test.
* testsuite/gas/aarch64/sve-movprfx_13.s: New test.
* testsuite/gas/aarch64/sve-movprfx_14.d: New test.
* testsuite/gas/aarch64/sve-movprfx_14.l: New test.
* testsuite/gas/aarch64/sve-movprfx_14.s: New test.
* testsuite/gas/aarch64/sve-movprfx_15.d: New test.
* testsuite/gas/aarch64/sve-movprfx_15.l: New test.
* testsuite/gas/aarch64/sve-movprfx_15.s: New test.
* testsuite/gas/aarch64/sve-movprfx_16.d: New test.
* testsuite/gas/aarch64/sve-movprfx_16.s: New test.
* testsuite/gas/aarch64/sve-movprfx_17.d: New test.
* testsuite/gas/aarch64/sve-movprfx_17.l: New test.
* testsuite/gas/aarch64/sve-movprfx_17.s: New test.
* testsuite/gas/aarch64/sve-movprfx_18.d: New test.
* testsuite/gas/aarch64/sve-movprfx_18.l: New test.
* testsuite/gas/aarch64/sve-movprfx_18.s: New test.
* testsuite/gas/aarch64/sve-movprfx_19.d: New test.
* testsuite/gas/aarch64/sve-movprfx_19.s: New test.
* testsuite/gas/aarch64/sve-movprfx_2.d: New test.
* testsuite/gas/aarch64/sve-movprfx_2.l: New test.
* testsuite/gas/aarch64/sve-movprfx_2.s: New test.
* testsuite/gas/aarch64/sve-movprfx_20.d: New test.
* testsuite/gas/aarch64/sve-movprfx_20.l: New test.
* testsuite/gas/aarch64/sve-movprfx_20.s: New test.
* testsuite/gas/aarch64/sve-movprfx_21.d: New test.
* testsuite/gas/aarch64/sve-movprfx_21.s: New test.
* testsuite/gas/aarch64/sve-movprfx_22.d: New test.
* testsuite/gas/aarch64/sve-movprfx_22.l: New test.
* testsuite/gas/aarch64/sve-movprfx_22.s: New test.
* testsuite/gas/aarch64/sve-movprfx_23.d: New test.
* testsuite/gas/aarch64/sve-movprfx_23.l: New test.
* testsuite/gas/aarch64/sve-movprfx_23.s: New test.
* testsuite/gas/aarch64/sve-movprfx_24.d: New test.
* testsuite/gas/aarch64/sve-movprfx_24.l: New test.
* testsuite/gas/aarch64/sve-movprfx_24.s: New test.
* testsuite/gas/aarch64/sve-movprfx_25.d: New test.
* testsuite/gas/aarch64/sve-movprfx_25.l: New test.
* testsuite/gas/aarch64/sve-movprfx_25.s: New test.
* testsuite/gas/aarch64/sve-movprfx_26.d: New test.
* testsuite/gas/aarch64/sve-movprfx_26.l: New test.
* testsuite/gas/aarch64/sve-movprfx_26.s: New test.
* testsuite/gas/aarch64/sve-movprfx_3.d: New test.
* testsuite/gas/aarch64/sve-movprfx_3.l: New test.
* testsuite/gas/aarch64/sve-movprfx_3.s: New test.
* testsuite/gas/aarch64/sve-movprfx_4.d: New test.
* testsuite/gas/aarch64/sve-movprfx_4.l: New test.
* testsuite/gas/aarch64/sve-movprfx_4.s: New test.
* testsuite/gas/aarch64/sve-movprfx_5.d: New test.
* testsuite/gas/aarch64/sve-movprfx_5.s: New test.
* testsuite/gas/aarch64/sve-movprfx_6.d: New test.
* testsuite/gas/aarch64/sve-movprfx_6.l: New test.
* testsuite/gas/aarch64/sve-movprfx_6.s: New test.
* testsuite/gas/aarch64/sve-movprfx_7.d: New test.
* testsuite/gas/aarch64/sve-movprfx_7.l: New test.
* testsuite/gas/aarch64/sve-movprfx_7.s: New test.
* testsuite/gas/aarch64/sve-movprfx_8.d: New test.
* testsuite/gas/aarch64/sve-movprfx_8.l: New test.
* testsuite/gas/aarch64/sve-movprfx_8.s: New test.
* testsuite/gas/aarch64/sve-movprfx_9.d: New test.
* testsuite/gas/aarch64/sve-movprfx_9.l: New test.
* testsuite/gas/aarch64/sve-movprfx_9.s: New test.
This patch wires in the new constraint verifiers into the assembler and
disassembler. Because of this the MOVPRFX tests have to be split out from the
generic SVE tests into their own tests so warnings can be ignored.
These tests are only intended to test the encoding correctness and not the
constraints.
gas/
* testsuite/gas/aarch64/sve-movprfx.d: New test.
* testsuite/gas/aarch64/sve-movprfx.s: New test.
* testsuite/gas/aarch64/sve.d: Refactor.
* testsuite/gas/aarch64/sve.s: Refactor.
* testsuite/gas/aarch64/sysreg-diagnostic.d: Update.
opcodes/
* aarch64-asm.c (aarch64_opcode_encode): Apply constraint verifier.
* aarch64-dis.c (print_operands): Refactor to take notes.
(print_verifier_notes): New.
(print_aarch64_insn): Apply constraint verifier.
(print_insn_aarch64_word): Update call to print_aarch64_insn.
* aarch64-opc.c (aarch64_print_operand): Remove attribute, update notes format.
Any open sequence at the end of a section or assembly is considered an error.
This patch adds a check at the end to ensure that all sequences have been closed
and if not reports a warning.
During disassembly it's not possible to detect this condition in the back-end so
the warning is only emitted from the assembler for now.
gas/
* config/tc-aarch64.c (force_automatic_sequence_close,
aarch64_frob_section): New.
* config/tc-aarch64.h (tc_frob_section, aarch64_frob_section): New.
This patch adds the verification rules for move prefix constraints.
The Arm SVE instruction MOVPRFX introduces[1] constraints on the instruction at
PC+4. Particularly the following constraints are handled by this patch
* MOVPRFX must be followed by an instruction.
* MOVPRFX can only be followed by non-layout altering directives.
* MOVPRFX destination register MUST be used as the destination register in the
instruction at PC+4, and is not allowed to be used in any other position other than
destructive input. This includes registers that architecturally overlap. e.g. x1
should be treated as z1.
* MOVPRFX must be followed by a restricted set of SVE instructions.
* The size of the destination register of MOVPRFX must be equal to that of
the operation at PC+4.
* The predicate register and operation of MOVPRFX must match that of the instruction
at PC+4
* The predicated instruction at PC+4 must use the merging predicate.
* Architectural aliases and pseudo-instructions need to be supported as well.
* MOVPRFX cannot be the last instruction in a sequence
Any failure to adhere to any of these constrains will emit an assembly warning
and a disassembly note.
[1] https://developer.arm.com/docs/ddi0584/latest/arm-architecture-reference-manual-supplement-the-scalable-vector-extension-sve-for-armv8-a
include/
* opcode/aarch64.h (aarch64_inst): Remove.
(enum err_type): Add ERR_VFI.
(aarch64_is_destructive_by_operands): New.
(init_insn_sequence): New.
(aarch64_decode_insn): Remove param name.
opcodes/
* aarch64-opc.c (init_insn_block): New.
(verify_constraints, aarch64_is_destructive_by_operands): New.
* aarch64-opc.h (verify_constraints): New.
gas/
* config/tc-aarch64.c (output_operand_error_report): Order warnings.
The current verifiers only take an instruction description and encoded value as
arguments. This was enough when the verifiers only needed to do simple checking
but it's insufficient for the purposes of validating instruction sequences.
This patch adds the required arguments and also a flag to allow a verifier to
distinguish between whether it's being run during encoding or decoding. It also
allows for errors and warnings to be returned by a verifier instead of a simple
pass/fail.
include/
* opcode/aarch64.h (struct aarch64_opcode): Expand verifiers to take
more arguments.
opcodes/
* aarch64-dis.c (aarch64_opcode_decode): Update verifier call.
* aarch64-opc.c (verify_ldpsw): Update arguments.
Previously the ERR_ values were defined as different constants, to make this a
bit more type safe and so they can be more easily re-used I'm changing them into
an actual enum and updating any usages.
include/
* opcode/aarch64.h (enum err_type): New.
(aarch64_decode_insn): Use it.
opcodes/
* aarch64-dis.c (ERR_OK, ERR_UND, ERR_UNP, ERR_NYI): Remove.
(aarch64_decode_insn, print_insn_aarch64_word): Use err_type.
This patch introduces aarch64_instr_sequence which is a structure similar to IT
blocks on Arm in order to track instructions that introduce a constraint or
dependency on instruction 1..N positions away from the instruction that opened
the block.
The struct is also wired through to the locations that require it.
gas/
* config/tc-aarch64.c (now_instr_sequence):
(*insn_sequence, now_instr_sequence): New.
(output_operand_error_record, do_encode): Add insn_sequence.
(md_assemble): Update insn_sequence.
(try_to_encode_as_unscaled_ldst, fix_mov_imm_insn, fix_insn):
Pass insn_sequence.
* config/tc-aarch64.h (struct aarch64_segment_info_type):
Add insn_sequence.
include/
* opcode/aarch64.h (struct aarch64_instr_sequence): New.
(aarch64_opcode_encode): Use it.
opcodes/
* aarch64-asm.c (aarch64_opcode_encode): Add insn_sequence.
* aarch64-dis.c (insn_sequence): New.
This patch series is to allow certain instructions such as the SVE MOVPRFX
instruction to apply a constraint/dependency on the instruction at PC+4.
This patch starts this off by marking which instructions impose the constraint
and which instructions must adhere to the constraint. This is done in a
generic way by extending the verifiers.
* The constraint F_SCAN indicates that an instruction opens a sequence and imposes
a constraint on an instructions following it. The length of the sequence depends
on the instruction itself and it handled in the verifier code.
* The C_SCAN_MOVPRFX flag is used to indicate which constrain the instruction is
checked against. An instruction with both F_SCAN and C_SCAN_MOVPRFX starts a
block for the C_SCAN_MOVPRFX instruction, and one with only C_SCAN_MOVPRFX must
adhere to a previous block constraint is applicable.
The SVE instructions in this list have been marked according to the SVE
specification[1].
[1] https://developer.arm.com/docs/ddi0584/latest/arm-architecture-reference-manual-supplement-the-scalable-vector-extension-sve-for-armv8-a
include/
* opcode/aarch64.h (struct aarch64_opcode): Add constraints,
extend flags field size.
(F_SCAN, C_SCAN_MOVPRFX, C_MAX_ELEM): New.
opcodes/
* aarch64-tbl.h (CORE_INSN, __FP_INSN, SIMD_INSN, CRYP_INSN, _CRC_INSN,
_LSE_INSN, _LOR_INSN, RDMA_INSN, FF16_INSN, SF16_INSN, V8_2_INSN,
_SVE_INSN, V8_3_INSN, CNUM_INSN, RCPC_INSN, SHA2_INSN, AES_INSN,
V8_4_INSN, SHA3_INSN, SM4_INSN, FP16_V8_2_INSN, DOT_INSN): Initialize
constraints.
(_SVE_INSNC): New.
(struct aarch64_opcode): (fjcvtzs, ldpsw, ldpsw, esb, psb): Initialize
constraints.
(movprfx): Change _SVE_INSN into _SVE_INSNC, add C_SCAN_MOVPRFX and
F_SCAN flags.
(msb, mul, neg, not, orr, rbit, revb, revh, revw, sabd, scvtf,
sdiv, sdivr, sdot, smax, smin, smulh, splice, sqadd, sqdecd, sqdech,
sqdecp, sqdecw, sqincd, sqinch, sqincp, sqincw, sqsub, sub, subr, sxtb,
sxth, sxtw, uabd, ucvtf, udiv, udivr, udot, umax, umin, umulh, uqadd,
uqdecd, uqdech, uqdecp, uqdecw, uqincd, uqinch, uqincp, uqincw, uqsub,
uxtb, uxth, uxtw, bic, eon, orn, mov, fmov): Change _SVE_INSN into _SVE_INSNC and add
C_SCAN_MOVPRFX and C_MAX_ELEM constraints.
I tried a build on macOS today and it failed due to a mismatch between
the printf format and the type in aarch64-linux-tdep.c. This patch
fixes the problem by using pulongest and %s rather than %ld.
gdb/ChangeLog
2018-10-02 Tom Tromey <tom@tromey.com>
* aarch64-linux-tdep.c (aarch64_linux_sigframe_init): Use pulongest.
The RISC-V memory model has been ratified, and it includes an additional
fence: "fence.tso". This pseudo instruction extends one of the
previously reserved full fence patterns to be less restrictive, and
therefor will execute correctly on all existing microarchitectures.
Thus there is no reason to allow this instruction to be disabled (or
unconverted to a full fence), so it's just unconditionally allowed.
I've added a test case for GAS to check that "fence.tso" correctly
assembles on rv32i-based targets. I checked to see that "fence.tso"
appears in "gas.log", but that's the only testing I've done.
gas/ChangeLog
2018-10-02 Palmer Dabbelt <palmer@sifive.com>
* testsuite/gas/riscv/fence-tso.d: New file.
* testsuite/gas/riscv/fence-tso.s: Likewise.
include/ChangeLog
2018-10-02 Palmer Dabbelt <palmer@sifive.com>
* opcode/riscv-opc.h (MATCH_FENCE_TSO): New define.
(MASK_FENCE_TSO): Likewise.
opcodes/ChangeLog
2018-10-02 Palmer Dabbelt <palmer@sifive.com>
* riscv-opc.c (riscv_opcodes) <fence.tso>: New opcode.
Extend the "target remote" and "target extended-remote" commands
such that if the filename provided is a Unix local domain (AF_UNIX)
socket, then it'll be treated as such, instead of trying to open
it as if it were a character device.
gdb/ChangeLog:
* NEWS: Mention changed commands.
* ser-uds.c: New file.
* configure.ac (SER_HARDWIRE): Add ser-uds.o.
* configure: Regenerate.
* Makefile.in: Add new file.
* serial.c (serial_open): Check if filename is a socket
and lookup the appropriate interface accordingly.
gdb/doc/ChangeLog:
* gdb.texinfo (Remote Connection Commands): Describe
the changes to target remote and target extended-remote
relating to Unix domain sockets.
As reported by Jan here:
https://sourceware.org/ml/gdb-patches/2018-09/msg00831.html
the check that sets the number of available registers is backwards.
gdb/testsuite/ChangeLog:
* gdb.arch/i386-avx512.exp: Fix setting of nr_regs based on
is_amd64_regs_target.
Add Aarch64 test to check register values of a previous frame
can be shown correctly across a signal.
gdb/testsuite/ChangeLog:
* gdb.arch/aarch64-sighandler-regs.c: New test.
* gdb.arch/aarch64-sighandler-regs.exp: New file.
* lib/gdb.exp (skip_aarch64_sve_tests): New proc.
Both the VFP and SVE registers may be contained within the reserved space of
the sigcontext and can be found by seraching for MAGIC values. Detect these
and add the registers (including pseudos) to the trad frame cache.
gdb/
* aarch64-linux-tdep.c (AARCH64_SIGCONTEXT_RESERVED_OFFSET): Add
define.
(AARCH64_EXTRA_MAGIC): Likewise.
(AARCH64_FPSIMD_MAGIC): Likewise.
(AARCH64_SVE_MAGIC): Likewise.
(AARCH64_EXTRA_DATAP_OFFSET): Likewise.
(AARCH64_FPSIMD_FPSR_OFFSET): Likewise.
(AARCH64_FPSIMD_FPCR_OFFSET): Likewise.
(AARCH64_FPSIMD_V0_OFFSET): Likewise.
(AARCH64_FPSIMD_VREG_SIZE): Likewise.
(AARCH64_SVE_CONTEXT_VL_OFFSET): Likewise.
(AARCH64_SVE_CONTEXT_REGS_OFFSET): Likewise.
(AARCH64_SVE_CONTEXT_P_REGS_OFFSET): Likewise.
(AARCH64_SVE_CONTEXT_FFR_OFFSET): Likewise.
(AARCH64_SVE_CONTEXT_SIZE): Likewise.
(read_aarch64_ctx): Add function.
(aarch64_linux_sigframe_init): Detect FP registers.
Inserted offset in final section in the GOT entry of type DTSOFF soon to be
relocated by the dynamic loader.
bfd/
2018-09-06 Cupertino Miranda <cmiranda@synopsys.com>
* arc-got.h (relocate_fix_got_relocs_for_got_info): Changed. Take TLS
section alignment in consideration for this relocation.
* elf32-arc.c (FINAL_SECTSTART): Added this formula macro.
(ARC_TLS_DTPOFF) Updated reloc to use new created macro instead.
A change upstream reveiled this issue, triggering an assert when linking glibc.
bfd/
2018-03-01 Cupertino Miranda <cmiranda@synopsys.com>
* elf32-arc.c (elf_arc_check_relocs): Changed.
Problem identified in the context of glibc with latest upstream binutils.
Dynamic symbol space was being reserved but, no actual information for the
symbol was being set. Data for the symbol was kept initialized with -1.
No easy test case was possible to be created.
bfd/
2018-03-01 Cupertino Miranda <cmiranda@synopsys.com>
* elf32-arc.c (elf_arc_check_relocs): Changed.
Change location where GOT information is collected for ARC target, avoiding
posible use conflicts of the previous .got field in the symbols hash_entry.
bfd/
2018-03-01 Cupertino Miranda <cmiranda@synopsys.com>
* arc-got.h (get_got_entry_list_for_symbol): Changed.
* ef32-arc.c (struct elf_arc_link_hash_entry): Moved and changed.
(elf_arc_link_hash_newfunc): Changed.
(arc_elf_link_hash_table_create): Removed old initializations.
(elf_arc_relocate_section, elf_arc_finish_dynamic_symbol): Changed.
This commit removes a workaround for a bug in glibc 2.1.3, which
was released 2000-02-24 and superseded 2000-11-09.
gdb/ChangeLog:
* gdb_proc_service.h (gdb_prfpregset_t): Remove typedef.
* proc-service.c (ps_lgetfpregs, ps_lsetfpregs): Use
prfpregset_t instead of gdb_prfpregset_t.
* configure.ac (PRFPREGSET_T_BROKEN): Remove check.
* configure, config.in: Rebuild.
This commit moves now-identical code from gdb/gdb_proc_service.h
and gdb/gdbserver/gdb_proc_service.h into the new shared file
gdb/common/gdb_proc_service.h.
gdb/ChangeLog:
* common/gdb_proc_service.h: New file, factored out from...
* gdb_proc_service.h: Moved common code to the above file.
* Makefile.in (HFILES_NO_SRCDIR): Add the above new file.
gdb/gdbserver/ChangeLog:
* gdb_proc_service.h: Moved common code to
common/gdb_proc_service.h.
This commit updates GDB's gdb_proc_service.h to use elf_{g,fp}regset_t
instead of gdb_{g,fp}regset_t if pr{g,fp}regset_t are undefined.
The types have been equivalent on GNU/Linux since at least 2005.
gdb/ChangeLog:
* gdb_proc_service.h: Use elf_gregset_t if prgregset_t is
undefined. Use elf_fpregset_t if prfpregset_t is undefined.
This commit adds a workaround from gdbserver's gdb_proc_service.h
to GDB's. It doesn't seem to have been needed on any glibc as far
back as 2001, but it's possibly required for other C libraries so
I've retained it.
gdb/ChangeLog:
* configure.ac: Check if sys/procfs.h defines elf_fpregset_t.
(AC_CHECK_HEADERS): Check for linux/elf.h.
* configure, config.in: Rebuild.
* gdb_proc_service.h: Include linux/elf.h if sys/procfs.h
doesn't define elf_fpregset_t.
This commit updates comments and whitespace in GDB's and gdbserver's
gdb_proc_service.h.
gdb/ChangeLog:
* gdb_proc_service.h: Whitespace change.
gdb/gdbserver/ChangeLog:
* gdb_proc_service.h: Synchronize comments and whitespace with
GDB's version of this file.
I noticed some spots that were checking HAVE_UNISTD_H. There is no
need to do this, as <unistd.h> is unconditionally included in many
places in gdb. This sort of cleanup was done once before, in 2013:
2013-07-01 Pedro Alves <palves@redhat.com>
* defs.h: Don't check HAVE_UNISTD_H before including <unistd.h>.
(STDIN_FILENO, STDOUT_FILENO, STDERR_FILENO): Delete.
* tracepoint.c: Don't check HAVE_UNISTD_H before including
<unistd.h>.
HAVE_UNISTD_H seems to come from gnulib, so there are still mentions
of it in the source.
gdb/ChangeLog
2018-10-01 Tom Tromey <tom@tromey.com>
* unittests/scoped_mmap-selftests.c: Don't check HAVE_UNISTD_H.
* unittests/scoped_fd-selftests.c: Don't check HAVE_UNISTD_H.
* common/scoped_fd.h: Don't check HAVE_UNISTD_H.
I realized that while I'd updated the README, I didn't update
gdb.texinfo to document the options to configure.
This patch copies the text from README into gdb.texinfo, adding
Texinfo markup.
gdb/ChangeLog
2018-10-01 Tom Tromey <tom@tromey.com>
* README: Minor change.
gdb/doc/ChangeLog
2018-10-01 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Configure Options): Document configure options.
Commit
c221b2f Testsuite: Add gdb_can_simple_compile
changed the source file name extension of the test program from .s to .c
resulting in compile fails. This, in turn, causes is_amd64_regs_target
checks to fail. In gdb.btrace/tailcall.exp and others, this causes the
wrong source file to be picked and the test to fail on 64-bit targets.
Change the test source from an assembly program to a C program using
inline assembly.
testsuite/
* lib/gdb.exp (is_amd64_regs_target): Change assembly to C inline
assembly.
Building GDB with --host=x86_64-apple-darwin15 using G++ 5.3.0 runs
into a number of -Werror=unused-variable warnings/errors:
../../src/gdb/i386-darwin-nat.c: In function 'void i386_darwin_dr_set(int, CORE_ADDR)':
../../src/gdb/i386-darwin-nat.c:283:7: error: unused variable 'current_pid' [-Werror=unused-variable]
int current_pid;
^
[etc, etc.]
This commit fixes all such warnings.
gdb/ChangeLog:
2018-09-30 Pedro Alves <palves@redhat.com>
* darwin-nat-info.c (darwin_debug_regions_recurse)
(info_mach_exceptions_command): Remove unused local variables.
* darwin-nat.c (darwin_decode_notify_message)
(darwin_nat_target::resume, darwin_nat_target::mourn_inferior)
(darwin_stop_inferior, darwin_setup_exceptions)
(darwin_nat_target::kill, darwin_attach_pid, darwin_ptrace_him)
(darwin_nat_target::attach, darwin_nat_target::detach)
(darwin_read_write_inferior, darwin_read_dyld_info): Remove unused
local variables.
* i386-darwin-nat.c (i386_darwin_dr_set): Remove unused local
variables.
I accidentally left some stray text in gdb/README.
This removes it. I'm checking this in as obvious.
gdb/ChangeLog
2018-09-29 Tom Tromey <tom@tromey.com>
* README: Remove some leftover text.
gdb's README and configure instructions in the manual are quite out of
date. They mention options that haven't existed for many years, among
other things.
This patch attempts to modernize the instructions somewhat. It is not
exhaustive, just an improvement -- more could be done. Perhaps even a
couple of the nodes should simply be removed and replaced by
references to the Autoconf manual.
The README file seems to have been generated from the Texinfo at some
point in the past. I did not continue this, but instead edited it
separately.
gdb/ChangeLog
2018-09-29 Tom Tromey <tom@tromey.com>
* PROBLEMS: Rewrite.
* README: Update.
gdb/doc/ChangeLog
2018-09-29 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Requirements): Mention C++, GNU make.
(Requirements): Sort the table. Add more libraries.
(Running Configure): Remove obsolete text.
(Separate Objdir): Likewise.
(Configure Options): Likewise.
