instruction registers, opcodes and formats. Build internal table
for new instructions and provide callbacks for assembler and
disassembler.
* itbl-lex.l, itbl-parse.y: Lex and yacc parsers for instruction
spec table.
* itbl-ops.h: New file. Header file for itbl support.
* config/itbl-mips.h: New file. Mips specific definitions for
itbl support.
includes config.h instead of host.h, tc.h instead of tp.h, and
targ-env.h instead of target-environment.h.
Also, obj-format.h includes targ-cpu.h instead of
target-processor.h.
start-sanitize-tic80
(Laying groundwork, that will be incrementally fleshed out,
for TIc80 support)
* configure.in (case ${generic_target}): Add tic80-*-coff entry.
* configure: Rebuild with autoconf.
* config/obj-coff.h (coff/tic80.h): Include if TC_TIC80 defined.
(TARGET_FORMAT): Define to "coff-tic80".
* config/tc-tic80.c: New file for TIc80 support.
* config/tc-tic80.h: New file for TIc80 support.
end-sanitize-tic80
Add support for openVMS/Alpha.
* as.h (PRINTF_LIKE): Don't define if VMS, for now.
* config/obj-evax.c: New file.
* config/obj-evax.h: New file.
* config/tc-alpha.c: Add support for EVAX format if OBJ_EVAX is
defined.
* config/tc-alpha.h: Add support for EVAX format if OBJ_EVAX is
defined. Add case for bfd_target_evax_flavour.
* config/vms-a-conf.h: New file.
* conf-a-gas.com: New file.
* configure.in: Add target alpha-*-*vms*.
* configure: Rebuild.
* makefile.vms: New file.
* read.c (s_lcomm): Align bss_seg on 8 byte boundary if OBJ_EVAX.
Don't call ffs on openVMS/Alpha.
Wed Jul 17 14:25:13 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c: New file.
* config/tc-d10v.h: New file.
* configure (d10v-*-elf): New target.
* configure.in (d10v-*-elf): New target.
end-sanitize-d10v
(build_bytes): Likewise.
(skip_colonthing): Handle :32 suffix.
(get_specific): Promote L_24 to L_32 if it makes a match.
Don't always promote L_8 to L_16.
(do_a_fix_imm): Clean up L_32 and L_24 handling.
H8/S related stuff that doesn't need to be sanitized.
start-sanitize-h8s
* config/tc-h8300.c (Smode): New variable.
(h8300hmode): Turn off Hmode.
(h8300smode): New function. Turn on Smode and Hmode.
(md_pseudo_table): New ".h8300s" pseudo-op.
(parse_reg): Handle "exr" register.
(get_operand): Handle bizarre syntax for "stm.l" and "ldm.l".
Handle "mach" and "machl" operands for ldmac.
(get_specific): Handle "stm.l" and "ldm.l".
(build_bytes): Handle "stm.l" and "ldm.l"; handle MACREG operands.
* config/tc-h8300.h (COFF_MAGIC): Handle H8/S magic number.
(Smode): Declare.
end-sanitize-h8s
Sanitized H8/S stuff until we know its status.
* as.c: Include sb.h and macro.h.
(max_macro_next): New global variable.
(main): Call macro_init.
(macro_expr): New static function.
* as.h (max_macro_nest): Declare.
* read.c (line_label): Rename from mri_line_label. Change all
uses.
(potable): Add exitm, irp, irpc, macro, mexit, rept.
(read_a_source_file): Always clear line_label at the start of a
line, not just when flag_mri or LABELS_WITHOUT_COLONS. Fixup
MRI/LABELS_WITHOUT_COLONS handling. In MRI mode, permit label:
equ val. Set line_label when calling colon. In MRI mode, a
leading '.' does not imply a pseudo-op. Check for macro expansion
before calling md_assemble.
(s_irp): New function.
(get_line_sb): New static function.
(s_macro): New function.
(s_mexit): New function.
(s_rept): New function.
* read.h (line_label): Rename from mri_line_label.
(s_irp, s_rept): Declare.
(s_macro, s_mexit): Declare.
* input-scrub.c: Include sb.h.
(sb_index, from_sb): New static variables.
(macro_nest): New static variable.
(struct input_save): Add sb_index and from_sb fields. Change
next_saved_file field to be struct input_save *.
(next_saved_file): Changed to be struct input_save *.
(input_scrub_push): Change to return type struct input_save *.
Save sb_index and from_sb.
(input_scrub_pop): Change parameter type to struct input_save *.
Restore sb_index and from_sb.
(input_scrub_include_sb): New function.
(input_scrub_next_buffer): Handle reading from from_sb.
(bump_line_counters): Only increment lines if not using from_sb.
* config/tc-m68k.c (opt_table): Add nest.
(opt_nest): New static function.
* gasp.c: Include sb.h and macro.h. Move all sb related functions
and definitions to sb.h and sb.c. Move all macro related
functions and definitions to macro.h and macro.c.
* sb.h, sb.c: New files, extracted from gasp.c.
* macro.h, macro.c: Likewise.
* Makefile.in (OBJS): Add sb.o and macro.o
(GASPOBJS): Define.
(gasp.new): Depend upon $(GASPOBJS). Use $(GASPOBJS) to link.
(TARG_CPU_DEP_m68k): Depend upon subsegs.h.
(gasp.o): Depend upon sb.h and macro.h.
(sb.o): New target.
(macro.o): New target.
(as.o): Depend upon sb.h and macro.h.
(input-scrub.o): Depend upon sb.h.
(read.o): Depend upon sb.h and macro.h.
* config/tc-i960.h (TC_COFF_SET_MACHINE): New macro. Calls tc_headers_hook.
* config/tc-i960.c (targ_has_iclass): Use I_CX | I_CX2 where I_CX was used
previously.
(tc_headers_hook): If I_CX2 is found, set flags to F_I960CA.
* config/tc-i960.c (po_hash): Declaration deleted.
(next_object_file_charP): Ditto.
(regnames, aregs, coj): Now const.
(parse_memop): Static array def_scale now const.
(md_begin): Cast away const when passing hash routines addresses of values in
regnames or aregs.
(md_longopts): Added "link-relax" and "no-relax" hyphenated forms. Continue to
accept one-word forms.
(struct tabentry, arch_tab): Moved to top level from inside md_parse_option.
Now const.
(md_show_usage): Use arch_tab to generate usage message. Print hyphenated
forms of relax options.
* config/tc-i960.h (DEFINE_I960_AOUT, TC_S_IS_*, TC_S_*_SYSPROC,
TC_S_FORCE_TO_*): Moved from here...
* config/tc-i960.c: ... to here. Changed DEFINE_I960_AOUT stuff to test
OBJ_AOUT and OBJ_BOUT directly.
* config/tc-i960.h (CTRL, COBR, COJ, REG, MEM*, FBRA, CALLJ, M1-M3, REG_OPC,
R_*, SFR, LIT, FP, OP, R, RS, RL, RSL, F, {R,F}{,L}{2,4}, M, SFR_OK, LIT_OK,
FP_OK, REG_ALIGN, MEMOP, I_*): Macros deleted.
* config/tc-i960.c (ARCH_XL): Define.
(arch_tab): Include XL.
(targ_has_sfr, targ_has_iclass): Handle XL.
(tc_headers_hook): Set flags to F_I960XL for i960XL.
- sparc[lite]-coff as well as sparc-lynx
- producing coff (including debug info) under BFD_ASSEMBLER option
- cleanup of cpu-specific code in non-cpu-specific files
(especially write.c)
- providing common code to avoid duplication in cpu-specific files
(specifically, md_number_to_chars)
- stylistic changes & misc cleanup
================
* config/tc-sparc.c (tc_gen_reloc): Make adjustment to addend be dependent on
howto fields, not on format flavour.
* struc-symbol.h (struct symbol): New fields sy_obj and sy_tc, defined as types
OBJ_SYMFIELD_TYPE and TC_SYMFIELD_TYPE, if those macros are defined.
* config/obj-coff.h (TC_SYMFIELD_TYPE, OBJ_SYMFIELD_TYPE): Define.
(TARGET_SYMBOL_FIELDS, I960_SYM_FIELDS): Don't define.
(sy_tc, sy_obj): Define so that the fields look like they used to, until all
references get changed.
* write.c (fixup_segment): Lots of variables no longer register. Reordered
some code for easier reading.
* config/obj-coff.c (obj_coff_dim): dim_index no longer register. Deleted
superfluous return statement.
(obj_coff_line, obj_coff_size, obj_coff_scl, obj_coff_type, obj_coff_val,
tag_init, tag_insert): Deleted superfluous return statement.
(align, obj_coff_section): Deleted debugging printfs.
* config/tc-i386.c (md_assemble): Discard some register decls. Use assignment
rather than memcpy to copy template.
(op_hash, reg_hash, prefix_hash): Default C initialization of statics is
sufficient.
* config/tc-sparc.c (print_insn): Array Reloc is now const, and points to
const.
* config/obj-coff.h (TARGET_FORMAT): Only use coff-sparc-lynx if TE_LYNX; use
coff-sparc otherwise.
[USE_NATIVE_HEADERS]: Delete this code; it isn't used.
* write.c (fixup_segment): Call TC_VALIDATE_FIX, if defined, before processing
a fixup. Call TC_ADJUST_RELOC_COUNT just before returning. Remove some
i960-coff-specific code.
(TC_ADJUST_RELOC_COUNT): Default to doing nothing.
* config/tc-i960.h (TC_ADJUST_RELOC_COUNT) [OBJ_COFF]: Define.
(i960_validate_fix): Declare.
(TC_VALIDATE_FIX): Define.
* config/tc-i960.c (i960_validate_fix): New function.
* write.c (number_to_chars_littleendian): New function. Write out bytes in
little endian order, doing size and range checking.
(number_to_chars_bigendian): New function, similar.
* write.h: Declare them.
* config/tc-*.c (md_number_to_chars): Use them.
* config/tc-vax.c (md_apply_fix): Ditto.
* config/tc-i386.c (md_apply_fix): Ditto.
* config/obj-coff.c: Rearranged code for handling line number data.
(line_fsym): Renamed from function_lineoff in BFD_ASSEMBLER case, since the
usage is different from non-BFD_ASSEMBLER case.
(in_function, clear_function, set_function): New macros, to combine some of the
functionality implemented in differnet ways in BFD_ASSEMBLER and non-... code.
Used in other functions that used to check function_lineoff &c.
(obj_emit_lineno): Split into two copies, one for BFD_ASSEMBLER, one for not.
Non-BFD_ASSEMBLER version now has temporary variable to contain char* pointer
pointed to by char** argument. Always follow CROSS_COMPILE code; easier to
read that way.
(obj_coff_ln): Don't call add_lineno or c_line_new if appline is set.
(obj_coff_endef) [BFD_ASSEMBLER]: Don't do anything special for ".bf", it's
been done elsewhere.
(coff_frob_symbol): If ilne number data is pending, call add_linesym to flush it.
(coff_frob_file): Don't do that here.
* config/obj-coff.h (coff_frob_file): Declare.
(obj_frob_file): Define, to call it.
* config/tc-sparc.h (md_create_short_jump, md_create_long_jump,
md_estimate_size_before_relax: Define them as macros calling as_fatal.
* config/tc-sparc.c: Don't define them as functions.
