The arguments to these functions are file_ptr, so these declarations
were accidentally implicitly down-casting them to signed int. This
allows for reading files between 2 and 4 GB in size in my testing (I
don't have a larger dll currently to test). These may not be natively
supported by Windows, but can appear when using split-dwarf information.
This solves a "can't get string table" error resulting from attempting
to pass a negative offset to bfd_seek. I encountered this occuring while
trying to use a debug file for libLLVM.dll, but searching online reveals
at least one other person may have run into a similar problem with
Firefox?
https://sourceforge.net/p/mingw-w64/mailman/mingw-w64-public/thread/CA+cU71k2bU0azQxjy4-77ynQj1O+TKmgtaTKe59n7Bjub1y7Tg@mail.gmail.com/
With this patch, the debug file appears to load successfully and I can
see debug information in gdb for the library.
gdb/ChangeLog:
* coffread.c (linetab_offset): Change type to file_ptr.
(linetab_size): Likewise.
(enter_linenos): Change parameter type to file_ptr.
(init_lineno): Likewise.
(init_stringtab): Likewise.
(coff_symtab_read): Likewise.
(coff_symfile_read): Change variable types to file_ptr.
Change-Id: I6ae3bf31efc51c826734ade6731ea6b1c32129f3
This changes the test case gdb.ada/fixed_points.exp to also be run
with -fgnat-encodings=minimal. This change pointed out that the test
case had a few incorrect expected outputs; these are fixed as well.
Note that the Overprecise_Object test only uses the non-legacy output
with GCC trunk.
gdb/testsuite/ChangeLog
2020-12-18 Tom Tromey <tromey@adacore.com>
* gdb.ada/fixed_points.exp: Also run with
-fgnat-encodings=minimal. Update expected output.
Build only unversioned libdep and remove the installed libdep.la since
only a single libdep.so is needed.
PR ld/27082
* Makefile.am
(libdep_la_LDFLAGS): Add -module -avoid-version.
(libdep_la_LINK): New.
(install-data-local): Depend on $(install-bfdpluginLTLIBRARIES)
and remove libdep.la.
Copy elf_gnu_osabi_retain from input only for relocatable link since
SHF_GNU_RETAIN has no impact on non-relocatable outputs.
bfd/
PR ld/27091
* elflink.c (elf_link_input_bfd): Copy elf_gnu_osabi_retain
from input only for relocatable link.
ld/
PR ld/27091
* testsuite/ld-elf/retain7.s: New file.
* testsuite/ld-elf/retain7a.d: Likewise.
* testsuite/ld-elf/retain7b.d: Likewise.
Fixes possible overflow of a static buffer for powerpc with translated
messages, and on v850 when symbol names are large.
* archive.c (_bfd_ar_spacepad, _bfd_ar_sizepad): Use auto buf.
* coff-mcore.c (coff_mcore_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_unhandled_reloc): Use asprintf in place
of fixed size and possibly too small buf for translated message.
* elf64-ppc.c (ppc64_elf_unhandled_reloc): Likewise.
* elf32-v850.c (v850_elf_check_relocs): Likewise.
* ecoff.c (ecoff_type_to_string): Pass in return string buff rather
than using static buffer2. Delete dead code. Remove unnecessary
parentheses.
(_bfd_ecoff_print_symbol): Pass auto buff to ecoff_type_to_string.
* elf32-rx.c (describe_flags): Pass in return string buf rather
than using static buf.
(rx_elf_merge_private_bfd_data): Pass buf to describe_flags.
(rx_elf_print_private_bfd_data): Likewise.
* mach-o.c (cpusubtype): Pass in return string buffer rather than
using static buffer.
(bfd_mach_o_bfd_print_private_bfd_data): Pass buff to cpusubtype.
* opncls.c (separate_debug_file_exists): Make buffer an auto var.
(bfd_fill_in_gnu_debuglink_section): Likewise.
* peXXigen.c (rsrc_resource_name): Pass in return string buffer
rather than using static buffer.
(rsrc_sort_entries): Pass buff to rsrc_resource_name.
* vms-alpha.c (_bfd_vms_write_emh): Pass tbuf to get_vms_time_string.
* vms-misc.c (get_vms_time_string): Pass in return string tbuf
rather than using static tbuf.
* vms.h (get_vms_time_string): Update prototype.
This tidies initialisation of target common sections, doing so using a
static initialiser rather than via code and deleting unnecessary
symbol_ptr_ptr variables (the one in asection is used instead).
The patch also initialises ecoff.c:bfd_debug_section using
BFD_FAKE_SECTION. That does change bfd_debug_section slightly,
output_section was NULL now bfd_debug_section, and symbol_ptr_ptr
was NULL now &bfd_debug_section.symbol, but I believe those changes
are safe.
bfd/
* ecoff.c (bfd_debug_section): Init using BFD_FAKE_SECTION.
(ecoff_scom_section, ecoff_scom_symbol): Statically init using
BFD_FAKE_SECTION and GLOBAL_SYM_INIT. Delete initialisation code.
(ecoff_scom_symbol_ptr): Delete.
* elf32-m32r.c (m32r_elf_scom_section, m32r_elf_scom_symbol),
(m32r_elf_scom_symbol_ptr),
* elf32-score.c (score_elf_scom_section, score_elf_scom_symbol),
(score_elf_scom_symbol_ptr),
* elf32-score7.c (score_elf_scom_section, score_elf_scom_symbol),
(score_elf_scom_symbol_ptr),
* elf32-tic6x.c (tic6x_elf_scom_section, tic6x_elf_scom_symbol),
(tic6x_elf_scom_symbol_ptr),
* elf32-v850.c (v850_elf_scom_section, v850_elf_scom_symbol),
(v850_elf_scom_symbol_ptr),
(v850_elf_tcom_section, v850_elf_tcom_symbol),
(v850_elf_tcom_symbol_ptr),
(v850_elf_zcom_section, v850_elf_zcom_symbol),
(v850_elf_zcom_symbol_ptr),
* elf64-mmix.c (mmix_elf_reg_section, mmix_elf_reg_section_symbol),
(mmix_elf_reg_section_symbol_ptr),
* elfxx-mips.c (mips_elf_scom_section, mips_elf_scom_symbol),
(mips_elf_scom_symbol_ptr): Likewise.
gas/
* ecoff.c (ecoff_frob_symbol): Rename scom_section to
ecoff_scom_section and statically initialise.
While removing printfi_filtered, I found a spot that used n_spaces
where the now-ordinary "%*s" approach would do. This patch makes this
change.
Tested on x86-64 Fedora 32.
gdb/ChangeLog
2020-12-17 Tom Tromey <tromey@adacore.com>
* printcmd.c (print_variable_and_value): Don't use n_spaces.
After seeing Simon's patch, I thought maybe it was finally time to
remove printfi_filtered and fprintfi_filtered, in favor of using the
"%*s" approach to indenting.
In this patch I took the straightforward approach of always adding a
leading "%*s", even when the format already started with "%s", to
avoid the trickier form of:
printf ("%*s", -indent, string)
Regression tested on x86-64 Fedora 32.
Let me know what you think.
gdb/ChangeLog
2020-12-17 Tom Tromey <tromey@adacore.com>
* gdbtypes.c (print_args, dump_fn_fieldlists, print_cplus_stuff)
(print_gnat_stuff, print_fixed_point_type_info)
(recursive_dump_type): Update.
* go32-nat.c (go32_sysinfo, display_descriptor): Update.
* c-typeprint.c (c_type_print_base_struct_union)
(c_type_print_base_1): Update.
* rust-lang.c (rust_internal_print_type): Update.
* f-typeprint.c (f_language::f_type_print_base): Update.
* utils.h (fprintfi_filtered, printfi_filtered): Remove.
* m2-typeprint.c (m2_record_fields): Update.
* p-typeprint.c (pascal_type_print_base): Update.
* compile/compile-loc2c.c (push, pushf, unary, binary)
(do_compile_dwarf_expr_to_c): Update.
* utils.c (fprintfi_filtered, printfi_filtered): Remove.
In the expression rewrite, Ada type resolution will be done at parse
time rather than in a post-parse pass. At this point,
language_defn::post_parser will be removed. However, for this to
work, the information available to post_parser must be made available
during the actual parse.
This patch refactors this code slightly to make this possible. In
particular, "void_context_p" is passed to the parser_state
constructor, and the parser state is then passed to the post_parser
method.
gdb/ChangeLog
2020-12-16 Tom Tromey <tom@tromey.com>
* rust-exp.y (rust_lex_tests): Update.
* parser-defs.h (parser_state): Add void_p parameter.
<void_context_p>: New member.
* parse.c (parse_exp_in_context): Update.
* language.h (language_defn::post_parser): Remove void_context_p,
completing, tracker parameters. Add parser state.
* ada-lang.c (ada_language::post_parser): Update.
This patch changes void_context_p to bool, as a prerequisite to the
change to post_parser that I submitted here:
https://sourceware.org/pipermail/gdb-patches/2020-December/174080.html
Tested by rebuilding.
Note that nothing in-tree passes true here. I don't know why this is,
but there is a use of this internally in AdaCore's tree. I will try
to submit that patch, if it is needed. (And if not, I will come back
around and remove this.)
gdb/ChangeLog
2020-12-16 Tom Tromey <tom@tromey.com>
* parse.c (parse_exp_1, parse_expression_for_completion): Update.
(parse_exp_in_context): Change void_context_p to bool.
* language.h (struct language_defn) <post_parser>: Change
void_context_p to bool.
* ada-lang.c (class ada_language) <post_parser>: Update.
For the same reason as explained in commit 7cb2893dfa ("gdb/testsuite:
gdb.mi/mi-nonstop-exit.exp: enable non-stop using GDBFLAGS").
Note that the use of
set GDBFLAGS "$GDBFLAGS ..."
instead of
append GDBFLAGS "..."
is intentional. "append" is silent when appending to a non-existent
variable. So if this code if moved to a proc (as is the case already
for step-sw-breakpoint-adjust-pc.exp) and we forget to add "global
GDBFLAGS", the flag won't be added to the global GDBFLAGS, and we won't
actually enable non-stop, and it might go unnoticed. Using the "set"
version will turn into an error if we forget the "global".
This makes these test work correctly with native-extended-gdbserver.
Some of them were silently failing because we runto_main is silent when
it fails.
gdb/testsuite/ChangeLog:
* gdb.base/async-shell.exp: Enable non-stop through GDBFLAGS.
* gdb.base/continue-all-already-running.exp: Likewise.
* gdb.base/moribund-step.exp: Likewise.
* gdb.base/step-sw-breakpoint-adjust-pc.exp: Likewise.
Change-Id: I19ef05d07a0ec4a9c9476af2ba6e1ea1159ee437
Skip plugin if not all required plugin hooks are available.
2020-12-16 Howard Chu <hyc@symas.com>
H.J. Lu <hongjiu.lu@intel.com>
PR ld/27081
* libdep_plugin.c (onload): Skip if not all required plugin hooks
are available.
* testsuite/config/default.exp (dep_plug_opt): New.
* testsuite/ld-elf/elf.exp: Pass $dep_plug_opt to nm.
* testsuite/ld-elf/pr26391.fd: New file.
On openSUSE Leap 15.2, when running test-case
gdb.base/batch-preserve-term-settings.exp I get:
...
spawn /bin/sh^M
PS1="gdb-subshell$ "^M
sh-4.4$ PS1="gdb-subshell$ "^M
gdb-subshell$ PASS: gdb.base/batch-preserve-term-settings.exp: batch run: \
spawn shell
...
but on Ubuntu 18.04.5, I get instead:
...
spawn /bin/sh^M
PS1="gdb-subshell$ "^M
$ gdb-subshell$ FAIL: gdb.base/batch-preserve-term-settings.exp: batch run: \
spawn shell (timeout)
...
Fix this by making the regexp recognize the second pattern as well.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-12-16 Tom de Vries <tdevries@suse.de>
* gdb.base/batch-preserve-term-settings.exp:
Prints progress like:
Downloading 4.89 MB separate debug info for /usr/lib64/libgcrypt.so.20.
Downloading 1.10 MB separate debug info for /usr/lib64/liblzma.so.5.
Downloading 1.31 MB separate debug info for /usr/lib64/liblz4.so.1.
Downloading 0.96 MB separate debug info for /usr/lib64/libsmime3.so.
[### ]
Tested on x86_64-linux.
ChangeLog:
2020-12-16 Martin Liska <mliska@suse.cz>
Tom de Vries <tdevries@suse.de>
* gdb/debuginfod-support.c (struct user_data): Remove has_printed
field. Add meter field.
(progressfn): Print progress using meter.
When running test-case gdb.base/info-shared.exp with target board
unix/-pie/-fPIE, we run into:
...
spawn -ignore SIGHUP gcc -fno-stack-protector \
outputs/gdb.base/info-shared/info-shared-solib1.c.o \
-fdiagnostics-color=never -fPIC -shared -Wl,-soname,info-shared-solib1.so \
-lm -fPIE -pie -o outputs/gdb.base/info-shared/info-shared-solib1.so^M
ld: Scrt1.o: in function `_start':^M
start.S:104: undefined reference to `main'^M
collect2: error: ld returned 1 exit status^M
compiler exited with status 1
...
The intention of the -pie/-fPIE flags is to build and test PIE executables on
platforms where that is not the default. However, the flags clash with the
flags required to build shared libraries.
Fix this by filtering out PIE-related flags out of the multilib_flags settings
in compile_shared_lib.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-12-16 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (gdb_compile_shlib_1): Factor out of ...
(gdb_compile_shlib): ... here. Filter out PIE-related flags.
I noticed this failure in gdb.reverse/reverse-insn.exp:
FAIL: gdb.reverse/insn-reverse.exp: adv_simd_vect_shift: compare registers on insn 0:fcvtzs s0, s0, #1
Turns out we're not recording changes to the FPSR. The SIMD/FP data
instructions may set bits in the FPSR, so it needs to be recorded for
proper reverse operations.
gdb/ChangeLog:
2020-12-16 Luis Machado <luis.machado@linaro.org>
* aarch64-tdep.c (aarch64_record_data_proc_simd_fp): Record FPSR.
When inserting hw watchpoints, we take care of masking off the top byte
of the address (and sign-extending it if needed). This guarantees we won't
pass tagged addresses to the kernel via ptrace.
However, from the kernel documentation on tagged pointers...
"Non-zero tags are not preserved when delivering signals. This means that
signal handlers in applications making use of tags cannot rely on the tag
information for user virtual addresses being maintained for fields inside
siginfo_t.
One exception to this rule is for signals raised in response to watchpoint
debug exceptions, where the tag information will be preserved."
So the stopped data address after a hw watchpoint hit can be potentially
tagged, and we don't handle this in GDB at the moment. This results in
GDB missing a hw watchpoint hit and attempting to step over an unsteppable
hw watchpoint, causing it to spin endlessly.
The following patch fixes this by adjusting the stopped data address and adds
some tests to expose the problem.
gdb/ChangeLog:
2020-12-16 Luis Machado <luis.machado@linaro.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::stopped_data_address): Handle the TBI.
gdbserver/ChangeLog:
2020-12-16 Luis Machado <luis.machado@linaro.org>
* linux-aarch64-low.cc (address_significant): New function.
(aarch64_target::low_stopped_data_address): Handle the TBI.
gdb/testsuite/ChangeLog:
2020-12-16 Luis Machado <luis.machado@linaro.org>
* gdb.arch/aarch64-tagged-pointer.c (main): Add a few more
pointer-based memory accesses.
* gdb.arch/aarch64-tagged-pointer.exp: Exercise additional
hw watchpoint cases.
elfNN_bed was made writable as an expedient means of communicating
ld -z max-page-size and ld -z common-page-size values to BFD linker
code, and even for objcopy to communicate segment alignment between
copy_private_bfd_data, rewrite_elf_program_header and
assign_file_positions_for_load_sections. Some time later elfNN_bed
elf_osabi was written by gas. It turns out none of these
modifications to elfNN_bed was necessary, so make it const again.
include/
* bfdlink.h (struct bfd_link_info): Add maxpagesize and
commonpagesize.
bfd/
* elfxx-target.h (elfNN_bed): Constify.
* bfd.c (bfd_elf_set_pagesize): Delete.
(bfd_emul_set_maxpagesize, bfd_emul_set_commonpagesize): Delete.
* elf.c (get_program_header_size): Get commonpagesize from
link info.
(_bfd_elf_map_sections_to_segments): Get maxpagesize from link info.
(assign_file_positions_for_load_sections): Likewise.
(assign_file_positions_for_non_load_sections): Likewise.
(rewrite_elf_program_header): Add maxpagesize param. Set map_p_align.
(copy_private_bfd_data): Don't call bfd_elf_set_maxpagesize.
Instead pass maxpagesize to rewrite_elf_program_header.
* elf32-nds32.c (relax_range_measurement): Add link_info param.
Get maxpagesize from link_info. Adjust caller.
* bfd-in2.h: Regenerate.
gas/
* config/obj-elf.c (obj_elf_section): Don't set elf_osabi here.
(obj_elf_type): Likewise.
ld/
* ld.h (ld_config_type): Delete maxpagesize and commonpagesize.
* emultempl/elf.em: Use link_info rather than config
for maxpagesize and commonpagesize.
* emultempl/ppc32elf.em: Likewise.
* ldexp.c (fold_binary, fold_name): Likewise.
* ldemul.c (after_parse_default): Likewise.
(set_output_arch_default): Don't call bfd_emul_set_maxpagesize
or bfd_emul_set_commonpagesize.
There are occasions where it is reasonable to use a macro defining
function parameters, but this isn't one of them. Use typedefs
instead, which also simplifies declaring a const array of function
pointers.
* libxcoff.h (struct xcoff_backend_data_rec): Constify
_xcoff_glink_code.
(XCOFF_RELOC_FUNCTION_ARGS, XCOFF_COMPLAIN_FUNCTION_ARGS): Delete.
(xcoff_reloc_function, xcoff_complain_function): New typedef.
(xcoff_calculate_relocation, xcoff_complain_overflow),
(xcoff_reloc_type_noop, xcoff_reloc_type_fail),
(xcoff_reloc_type_pos, xcoff_reloc_type_neg),
(xcoff_reloc_type_rel, xcoff_reloc_type_toc),
(xcoff_reloc_type_ba, xcoff_reloc_type_crel): Update declaration.
* coff-rs6000.c (xcoff_reloc_type_br): Declare using typedef.
(xcoff_complain_overflow_dont_func): Likewise.
(xcoff_complain_overflow_bitfield_func): Likewise.
(xcoff_complain_overflow_signed_func): Likewise.
(xcoff_complain_overflow_unsigned_func): Likewise.
(xcoff_calculate_relocation, xcoff_complain_overflow): Constify.
(xcoff_glink_code): Constify.
* coff64-rs6000.c (xcoff64_reloc_type_br): Declare using typedef.
(xcoff64_calculate_relocation, xcoff64_glink_code): Constify.
This patch tidies some COFF and PE code that unnecessarily used static
variables to communicate between functions.
* coffcode.h (pelength, peheader): Delete static variables.
(coff_apply_checksum): Instead, define them as auto vars, and pass..
(coff_read_word, coff_compute_checksum): ..to here. Delete
unnecessary forward declarations.
* pei-x86_64.c (pdata_count): Delete static variable.
(struct pex64_paps): New.
(pex64_print_all_pdata_sections, pex64_bfd_print_pdata): Pass
a pex64_paps for counting.
* peicode.h (jtab): Constify.
"document" command executed in python, gdb.execute("document
<comname>\n...\nend\n"), will wait for user input. Python extension stops
working from that point.
multi-line suport was introduced in commit 56bcdbea2. But "document" support
seem to be implemented.
gdb/ChangeLog:
2020-12-02 Rae Kim <rae.kim@gmail.com>
* cli/cli-script.c (do_document_command): Rename from
document_command. Handle multi-line input.
(multi_line_command_p): Handle document_control.
(build_command_line): Likewise.
(execute_control_command_1): Likewise.
(process_next_line): Likewise.
(document_command): Call do_document_command.
* cli/cli-script.h (enum command_control_type): Add
document_control.
gdb/testsuite/ChangeLog:
2020-12-02 Rae Kim <rae.kim@gmail.com>
* gdb.base/document.exp: New test.
Change-Id: Ice262b980c05051de4c106af9f3fde5b2a6df6fe
While working on the expression rewrite, I found a few spots that
called the internal functions of the expression evaluator, just to
pass in an expected type. This patch adds a parameter to
evaluate_expression so that these functions can avoid this dependency.
Regression tested on x86-64 Fedora 28.
gdb/ChangeLog
2020-12-15 Tom Tromey <tom@tromey.com>
* stap-probe.c (stap_probe::evaluate_argument): Use
evaluate_expression.
* dtrace-probe.c (dtrace_probe::evaluate_argument): Use
evaluate_expression.
* value.h (evaluate_expression): Add expect_type parameter.
* objc-lang.c (print_object_command): Call evaluate_expression.
* eval.c (evaluate_expression): Add expect_type parameter.
This adds a new helper method, expression::first_opcode, that extracts
the outermost opcode of an expression. This simplifies some patches
in the expression rewrite series.
Note that this patch requires the earlier patch to avoid manual
dissection of OP_TYPE operations.
2020-12-15 Tom Tromey <tom@tromey.com>
* varobj.c (varobj_create): Use first_opcode.
* value.c (init_if_undefined_command): Use first_opcode.
* typeprint.c (whatis_exp): Use first_opcode.
* tracepoint.c (validate_actionline): Use first_opcode.
(encode_actions_1): Use first_opcode.
* stack.c (return_command): Use first_opcode.
* expression.h (struct expression) <first_opcode>: New method.
* eval.c (parse_and_eval_type): Use first_opcode.
* dtrace-probe.c (dtrace_process_dof_probe): Use first_opcode.
I noticed hat evaluate_subexp_do_call takes an array of arguments and
a count -- but, unlike the usual convention, the count does not
include the first element.
This patch changes this function to match call_function_by_hand --
passing the callee separately, and using an array_view for the
arguments. This makes it simpler to understand.
Regression tested on x86-64 Fedora 28.
gdb/ChangeLog
2020-12-15 Tom Tromey <tom@tromey.com>
* f-lang.c (evaluate_subexp_f): Update.
* expression.h (evaluate_subexp_do_call): Update.
* eval.c (evaluate_subexp_do_call): Add callee parameter. Replace
nargs, argvec with array_view.
(evaluate_funcall): Update.
The Ada component interval handling code, used for aggregate
assignments, does a pre-pass over the sub-expressions so that it can
size an array. For my expression rewrite, it was handy to C++-ify
this.
gdb/ChangeLog
2020-12-15 Tom Tromey <tom@tromey.com>
* ada-lang.c (num_component_specs): Remove.
(assign_aggregate): Update.
(aggregate_assign_positional, aggregate_assign_from_choices)
(aggregate_assign_others, add_component_interval): Change
arguments.
Add accessor methods to elfcpp::Ehdr class for EI_OSABI and EI_ABIVERSION;
use those to simplify initialization of Osabi class and eliminate the need
to template the class.
elfcpp/
* elfcpp.h (class Ehdr): Add get_ei_osabi and get_ei_abiversion methods.
gold/
* dwp.cc (class Dwo_file): Use new Ehdr::get_ei_osabi and
get_ei_abiversion methods.
* incremental.cc (make_sized_incremental_binary): Likewise.
* object.cc (Sized_relobj_file::Sized_relobj_file): Likewise.
(make_elf_sized_object): Likewise.
* object.h (class Osabi): Make the class untemplated.
After Andrew's latest patch, I noticed that the deprecation warnings
could use the (so-called) title style when printing command names.
This patch implements this idea.
gdb/ChangeLog
2020-12-15 Tom Tromey <tromey@adacore.com>
* cli/cli-decode.c (deprecated_cmd_warning): Use title style for
command names.
gdb/testsuite/ChangeLog
2020-12-15 Tom Tromey <tromey@adacore.com>
* gdb.base/style.exp: Add deprecation tests.
On SLE-11, I run into:
...
(gdb) if 1^M
>shell HOME=/dev/null PS1="gdb-subshell$ " /bin/sh^M
>end^M
hostname:/dir> FAIL: gdb.base/multi-line-starts-subshell.exp: \
spawn subshell from multi-line (timeout)
...
The problem is that the PS1 setting has no effect, due to a bug on older
openSUSE/SLE version. The mechanism there is:
- /etc/profile sets ENV=/etc/bash.bashrc
- /bin/sh is started
- /bin/sh executes ENV, in other words /etc/bash.bashrc
- during the execution of /etc/bash.bashrc, PS1 is set unconditionally
Fix this by setting PS1 after spawning the subshell.
Tested on x86_64-linux.
2020-12-15 Tom de Vries <tdevries@suse.de>
PR testsuite/26952
* gdb.base/multi-line-starts-subshell.exp: Set PS1 after spawning
shell.
Add (or suppress) a DT_GNU_FLAGS_1 dynamic section
with a bit flag value of DF_GNU_1_UNIQUE.
bfd/
* elflink.c (bfd_elf_size_dynamic_sections): Call
_bfd_elf_add_dynamic_entry to add a DT_GNU_FLAGS_1 section.
include/
* bfdlink.h (struct bfd_link_info): New field gnu_flags_1.
ld/
* emultempl/elf.em (gld${EMULATION_NAME}_handle_option):
Parse -z unique / -z nounique options.
DT_GNU_FLAGS_1 added to the DT_VALRNGLO-DT_VALRNGHI range.
DT_GNU_FLAGS_1 value DF_GNU_1_UNIQUE added.
* elf/common.h (DT_GNU_FLAGS_1, DF_GNU_1_UNIQUE): Define.
