Alan Modra
0e1a166b28
* dwarf2dbg.c (dwarf2_directive_file): Avoid signed/unsigned warning.
...
* write.c (set_symtab): Update bfd_alloc declaration. Use a temp
var to ensure bfd_alloc arg is the right type.
(write_object_file): Cast args of bfd_seek. Replace bfd_write with
bfd_bwrite.
* config/obj-coff.c: Replace calls to bfd_write with calls to
bfd_bwrite. Cast args of bfd_seek.
* config/obj-elf.c (obj_elf_change_section): Avoid signed/unsigned
warning.
* config/tc-mn10300.c (set_arch_mach): Make param unsigned.
* config/tc-tic54x.c (tic54x_mlib): Replace bfd_read call with
call to bfd_bread.
2001-09-18 10:08:15 +00:00
Alan Modra
e0890092b6
* expr.c (expr): Move code setting "retval" to the end of the loop,
...
and rearrange for efficiency. For "PIC code" subtraction, use
"rightseg" rather than recalculating. For "symbol OP symbol"
subtract, set "retval" to absolute_section if symbols in same
section.
* symbols.c (resolve_symbol_value): Resolve "sym +/- expr" to an
O_symbol. Simplify a +/- b code. Allow equality and non-equality
comparisons on symbols from any section. Allow other comparison
operators as for subtraction.
(symbol_equated_reloc_p): New predicate function.
* symbols.h (symbol_equated_reloc_p): Declare.
* write.c (adjust_reloc_syms): Use symbol_equated_reloc_p.
(write_relocs): Likewise.
(write_object_file): Likewise.
(relax_segment <rs_machine_dependent>): Ensure segment for
expression syms is set correctly.
* config/tc-mips.c (md_estimate_size_before_relax): Likewise.
* config/tc-i386.c (md_assemble <Output jumps>): Don't lose part
of a complex expression when setting up frag_var.
2001-09-09 14:01:17 +00:00
Alan Modra
0e389e770d
* read.c: Standardize error/warning messages - don't capitalise, no
...
final period or newline, don't say "ignored" or "zero assumed" for
as_bad messages. In some cases, change the wording to that used
elsewhere for similar messages.
* app.c, as.c, atof-generic.c, cgen.c, cond.c, depend.c, dwarf2dbg.c,
ecoff.c, expr.c, frags.c, input-file.c, input-scrub.c, listing.c,
output-file.c, stabs.c, subsegs.c, symbols.c, write.c: Likewise.
* ecoff.c (ecoff_directive_end): Test for missing name by
comparing input line pointers rather than reading string.
(ecoff_directive_ent): Likewise.
* read.c (s_set): Likewise.
(s_align): Report a warning rather than an error for
alignment too large.
(s_comm): Check for missing symbol name.
(s_lcomm_internal): Likewise.
(s_lsym): Likewise.
(s_globl): Use is_end_of_line instead of looking for '\n'.
(s_lcomm_internal): Likewise.
(ignore_rest_of_line): Report a warning rather than an error.
2001-08-01 01:44:25 +00:00
Alan Modra
050be34e82
* write.c (relax_segment <rs_space>): Account for fr_fix.
2001-07-26 03:39:29 +00:00
Alan Modra
ac62c3468d
* symbols.c (S_GET_VALUE): Don't treat O_constant and local
...
symbols specially. Always resolve, adding fr_address to value.
* write.c (write_object_file): Don't add fr_address to sym values.
(relax_frag): Likewise.
(relax_segment): Likewise.
* config/obj-ieee.c (do_symbols): Likewise.
* config/tc-cris.c (md_convert_frag): Likewise.
* config/tc-fr30.c (md_convert_frag): Likewise.
* config/tc-i386.c (md_convert_frag): Likewise.
* config/tc-m32r.c (md_convert_frag): Likewise.
* config/tc-m68hc11.c (md_convert_frag): Likewise.
* config/tc-mcore.c (md_convert_frag): Likewise.
* config/tc-mips.c (mips16_extended_frag): Likewise.
* config/tc-ns32k.c (md_convert_frag): Likewise.
* config/tc-m68k.c (md_convert_frag_1): Likewise.
(BRANCHBWL, BRABSJUNC, BRABSJCOND, BRANCHBW, FBRANCH, DBCCLBR,
DBCCABSJ, PCREL1632, PCINDEX, ABSTOPCREL): Decrement.
(md_relax_table): Remove first four entries. Format.
(md_estimate_size_before_relax): Remove old_fix. Don't bother
setting fr_var. Simplify byte branch checks.
2001-07-23 13:03:40 +00:00
Nick Clifton
8754881645
Fix mips16 testsuite failure by allowing finalize_syms to be set before
...
size_segs is called.
2001-07-03 15:04:19 +00:00
Nick Clifton
38b87a1b80
Do not set finalize_syms until after the segments have been sized.
...
Some backends may still need to access the syms's frags in order to
adjust relaxed frags.
2001-06-27 08:49:42 +00:00
Alan Modra
1a16aca4b4
* write.c (fixup_segment <Difference of 2 syms same seg>): Don't
...
subtract MD_PCREL_FROM_SECTION for 68k.
(fixup_segment <Difference of 2 syms different seg>): Only fudge
by adding MD_PCREL_FROM_SECTION for 68k or if not already pcrel.
2001-06-27 07:02:24 +00:00
Alan Modra
d48019e088
* write.c (fixup_segment <Difference of 2 syms same seg>): If
...
pcrel, subtract MD_PCREL_FROM_SECTION value.
2001-06-27 03:14:47 +00:00
Alan Modra
9e40345d0e
* write.c (relax_segment <rs_space>): Check the section of a
...
symbol to determine whether it is absolute rather than comparing
its frag against zero_address_frag as listings play tricks with
frags.
2001-05-27 12:17:38 +00:00
Alan Modra
54d3cad90d
* write.c (relax_segment <rs_space>): Calculate growth using
...
addresses before stretch. Prevent repeated error messages.
From Peter Jakubek <pjak@snafu.de>
Use as_bad_where and as_warn_where to pinpoint errors.
2001-05-26 12:45:15 +00:00
Alan Modra
766c03c9fa
* write.c (relax_segment): Don't zap fr_symbol when relaxing.
2001-05-24 23:33:00 +00:00
Alan Modra
e027f3e8a4
* write.c (write_object_file): Set finalize_syms = 1 before
...
size_seg is called.
2001-05-24 08:19:32 +00:00
Alan Modra
6386f3a767
* symbols.c (resolve_symbol_value): Remove "finalize" param,
...
instead use finalize_syms directly. Don't treat expressions
specially with regard to finalize_syms. Update calls to self.
(resolve_local_symbol): Update call to resolve_symbol_value.
(S_GET_VALUE): Likewise. Return resolve_symbol_value if
!finalize_syms.
* symbols.h (resolve_symbol_value): Update prototype.
* config/obj-aout.c (obj_crawl_symbol_chain): Update call
to resolve_symbol_value.
* config/obj-bout.c (obj_crawl_symbol_chain): Likewise.
* config/obj-coff.c (do_relocs_for): Likewise.
(yank_symbols): Likewise.
(fixup_segment): Likewise.
* config/obj-vms.c (obj_crawl_symbol_chain): Likewise.
* config/tc-mips.c (md_convert_frag): Likewise.
* config/tc-ppc.c (ppc_frob_symbol): Likewise.
(ppc_fix_adjustable): Likewise.
* dwarf2dbg.c (dwarf2dbg_estimate_size_before_relax): Likewise.
(dwarf2dbg_convert_frag): Likewise.
* ehopt.c (eh_frame_estimate_size_before_relax): Likewise.
(eh_frame_convert_frag): Likewise.
* expr.c (make_expr_symbol): Likewise.
* write.c (adjust_reloc_syms): Likewise.
(write_object_file): Likewise.
(relax_segment): Likewise.
(fixup_segment): Likewise.
(finalize_syms): Init to zero, and update comment.
(write_object_file): Set finalize_syms to 1 rather than 2.
* doc/internals.texi (sy_value): Mention finalize_syms.
(S_GET_VALUE): Remove restriction on when S_GET_VALUE can be called.
2001-05-22 10:23:50 +00:00
Jakub Jelinek
f5fa8ca231
bfd/
...
* libbfd-in.h (_bfd_merge_section): New.
(_bfd_write_merged_section): New.
(_bfd_merged_section_offset): New.
* libbfd.h: Rebuilt.
* linker.c (_bfd_generic_link_output_symbols): Handle
discard_sec_merge.
* aoutx.h (aout_link_write_symbols): Likewise.
* pdp11.c (aout_link_write_symbols): Likewise.
* elflink.h (elf_link_add_object_symbols): Call _bfd_merge_section.
(elf_bfd_final_link): Adjust global symbols pointing into SEC_MERGE
sections.
(elf_link_sec_merge_syms): New.
(elf_link_input_bfd): Call _bfd_merged_section_offset
and _bfd_write_merged_section.
Handle discard_sec_merge.
* elf-bfd.h (struct elf_link_hash_table): Add merge_info
field.
(struct bfd_elf_section_data): Likewise.
* elf.c (_bfd_elf_make_section_from_shdr): Set SEC_MERGE and
SEC_STRINGS section flags and entsize from their ELF counterparts.
(_bfd_elf_link_hash_table_init): Initialize merge_info.
(elf_fake_sections): Set SHF_MERGE, SHF_STRINGS and sh_entsize
from their BFD counterparts.
* merge.c: New file.
* Makefile.am: Add strtab.lo.
* Makefile.in: Rebuilt.
include/
* bfdlink.h (bfd_link_discard): Add discard_sec_merge.
gas/
* config/obj-elf.c (obj_elf_change_section): Add entsize argument,
handle SHF_MERGE and SHF_STRINGS.
(obj_elf_parse_section_letters): Set SHF_MERGE and SHF_STRINGS.
(obj_elf_section): Allow additional argument specifying entity size.
* write.c (adjust_reloc_syms): Keep relocations against local symbols
in SEC_MERGE sections.
ld/
* ldmain.c (main): Default to discard_sec_merge.
* lexsup.c (OPTION_DISCARD_NONE): Define.
(ld_options): Add --discard-none.
(parse_args): Handle OPTION_DISCARD_NONE.
* ldlang.c (wild_doit): SEC_MERGE should be set in the output
section only if SEC_MERGE and SEC_STRINGS flags and entsize of
all its input sections match.
2001-04-13 00:34:36 +00:00
Hans-Peter Nilsson
aacb52510a
* write.c (write_object_file): Reset broken word state before
...
calling relax_seg.
2001-04-04 03:05:47 +00:00
Alan Modra
e46d99eb07
Multi-pass relaxation machinery.
2001-03-30 02:19:36 +00:00
Nick Clifton
37006e4391
fix_new_exp: Print an error if passed a register.
2001-03-23 18:15:49 +00:00
Alan Modra
38686296b3
Use `relax_marker' instead of fragile address test code to determine
...
whether a frag's fr_address has been updated.
2001-03-20 03:12:01 +00:00
Nick Clifton
f7e42eb4af
Fix copyright notices
2001-03-08 23:24:26 +00:00
Ian Lance Taylor
c842b53ae1
* write.c (is_dnrange): Stop as soon as the address becomes
...
larger.
(relax_frag): Add segment parameter. Only call symbol_get_frag
once. Only call is_dnrange if the symbol is in the same segment,
and the symbol address is larger.
(relax_segment): Pass segment to md_relax_frag and relax_frag.
* write.h (relax_frag): Update declaration.
* config/tc-fr30.c (fr30_relax_frag): Add segment parameter. Pass
it to relax_frag.
* config/tc-m32r.c (m32r_relax_frag): Likewise.
* config/tc-m32r.h (md_relax_frag): Add segment parameter.
(m32r_relax_frag): Update declaration.
* config/tc-mips.h (md_relax_frag): Add segment parameter.
* config/tc-tic54x.h (md_relax_frag): Likewise.
* doc/internals.texi (CPU backend): Update documentation for
md_relax_frag.
2001-02-13 21:27:52 +00:00
Richard Henderson
799051fc87
* write.c (subsegs_finish): Fix thinko last change -- don't
...
"optimize" the alignment == 0 case.
2000-12-28 19:14:37 +00:00
Richard Henderson
0a9ef43907
* as.h (rs_align_test): New.
...
* frags.c (NOP_OPCODE): Move default from read.c.
(MAX_MEM_FOR_RS_ALIGN_CODE): New default.
(frag_align_code): New.
* frags.h (frag_align_code): Declare.
* read.c (NOP_OPCODE): Remove.
(do_align): Use frag_align_code.
* write.c (NOP_OPCODE): Remove.
(get_recorded_alignment): New.
(cvt_frag_to_fill): Handle rs_align_test.
(relax_segment): Likewise.
(subsegs_finish): Align last subseg in section to the
section alignment. Use frag_align_code.
* write.h (get_recorded_alignment): Declare.
* config/obj-coff.c (size_section): Handle rs_align_test.
(fill_section, fixup_mdeps): Likewise.
(write_object_file): Use frag_align_code.
* config/tc-alpha.c (alpha_align): Use frag_align_code.
(alpha_handle_align): New.
* config/tc-alpha.h (HANDLE_ALIGN): New.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-i386.h (md_do_align): Use frag_align_code.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-ia64.c (ia64_md_do_align): Don't do code alignment.
(ia64_handle_align): New.
* config/tc-ia64.h (HANDLE_ALIGN): New.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-m32r.c (m32r_do_align): Remove.
(m32r_handle_align): New.
(fill_insn): Use frag_align_code.
* config/tc-m32r.h (md_do_align): Remove.
(HANDLE_ALIGN, MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-m88k.c, config/tc-m88k.h: Similarly.
* config/tc-mips.c, config/tc-mips.h: Similarly.
* config/tc-sh.c (sh_cons_align): Use rs_align_test.
(sh_handle_align): Likewise. Handle rs_align_code.
(sh_do_align): Remove.
* config/tc-sh.h (md_do_align): Remove.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
* config/tc-sparc.c (sparc_cons_align): Use rs_align_test.
(sparc_handle_align): Likewise. Handle rs_align_code.
* config/tc-sparc.h (md_do_align): Remove.
(MAX_MEM_FOR_RS_ALIGN_CODE): New.
2000-12-28 10:07:56 +00:00
Richard Henderson
220e750f6f
* dwarf2dbg.c: Rewrite from scratch. Queue all debugging output
...
until dwarf2_finish; use relaxation to get cross-fragment offsets;
thread multiple subsegments properly; handle multiple code
sections properly; emit proper compilation unit info for assembler
generated debugging.
* as.h (enum _relax_state): Add rs_dwarf2dbg.
* dwarf2dbg.h (struct dwarf2_line_info): Remove filename.
(dwarf2dbg_estimate_size_before_relax): Declare.
(dwarf2dbg_relax_frag, dwarf2dbg_convert_frag): Declare.
* write.c: Include dwarf2dbg.h.
(cvt_frag_to_fill): Handle rs_dwarf2dbg.
(relax_segment): Likewise.
2000-11-29 21:42:41 +00:00
Kazu Hirata
ef99799a42
2000-11-06 Kazu Hirata <kazu@hxi.com>
...
* as.c: Fix formatting.
* dwarf2dbg.c: Likewise.
* itbl-ops.c: Likewise.
* listing.c: Likewise.
* macro.h: Likewise.
* messages.c: Likewise.
* read.c: Likewise.
* subsegs.c: Likewise.
* subsegs.h: Likewise.
* write.c: Likewise.
2000-11-07 01:18:45 +00:00
Alan Modra
44852b190c
Make elf section symbols global for link-once sections.
2000-10-07 12:52:15 +00:00
Alan Modra
927781e250
Miscellaneous tiny fixes.
2000-09-05 03:53:02 +00:00
Alexandre Oliva
aca719bf68
* write.c (TC_FIX_ADJUSTABLE): Remove the duplicate.
2000-08-23 18:20:44 +00:00
Alexandre Oliva
8f36cd18af
* write.c (TC_FIX_ADJUSTABLE): Define to 1, if not defined.
...
(fixup_segment) Use it instead of TC_DONT_FIX_NON_ADJUSTABLE.
* config/tc-i386.h (TC_DONT_FIX_NON_ADJUSTABLE): Remove.
<OBJ_ELF, OBJ_COFF, TE_PE> (TC_FIX_ADJUSTABLE): Define.
* config/tc-arm.h (TC_DONT_FIX_NON_ADJUSTABLE): Remove.
<OBJ_ELF> (TC_FIX_ADJUSTABLE): Define.
* config/tc-i960.h, config/tc-m68k.h, config/tc-v850.h:
Likewise.
2000-08-22 04:52:40 +00:00
Eric Christopher
58a77e418b
2000-08-22 Eric Christopher <echristo@cygnus.com>
...
* config/tc-mn10300.c: (md_apply_fix): New function.
(mn10300_force_relocation): New function.
(mn10300_fix_adjustable): New function.
* config/tc-mn10300.h: (TC_FORCE_RELOCATION): Define.
(TC_HANDLES_FX_DONE): Define.
(obj_fix_adjustable): Define.
(MD_APPLY_FIX3): Define.
(TC_LINKRELAX_FIXUP): Define.
* write.c: (TC_LINKRELAX_FIXUP): Define if not
previously defined.
(fixup_segment): Use TC_LINKRELAX_FIXUP.
* doc/internals.texi: Document TC_LINKRELAX_FIXUP.
2000-08-22 01:20:41 +00:00
Alexandre Oliva
021986386e
* write.c (fixup_segment) [TC_DONT_FIX_NON_ADJUSTABLE]: Use
...
obj_fix_adjustable() and tc_fix_adjustable() to tell whether to
add a symbol's address. Removed all target-specific #ifdefs that
used to accomplished the same.
* config/tc-v850.h (TC_DONT_FIX_NON_ADJUSTABLE): Define.
* config/tc-m68k.h (TC_DONT_FIX_NON_ADJUSTABLE): Define.
* config/tc-arm.h (TC_DONT_FIX_NON_ADJUSTABLE): Define.
* config/tc-i960.h (TC_DONT_FIX_NON_ADJUSTABLE): Define.
* config/tc-i386.h (TC_DONT_FIX_NON_ADJUSTABLE): Define.
2000-08-18 18:45:05 +00:00
Nick Clifton
efaf0ba464
Fix formatting.
2000-07-20 20:07:09 +00:00
Nick Clifton
6aa4f5169f
Fix previous delta so that it is only used for TE_GO32 and not !TE_PE.
2000-06-29 23:10:08 +00:00
Nick Clifton
dbddefbfe6
Set vma and lma for segment when using the BFD_ASSEMBLER for COFF format files.
2000-06-29 22:51:58 +00:00
Hans-Peter Nilsson
753f6b125b
* write.c (write_object_file) [! WORKING_DOT_WORD]: If defined,
...
call TC_CHECK_ADJUSTED_BROKEN_DOT_WORD for each word after
adjustments.
2000-04-03 12:05:31 +00:00
Ian Lance Taylor
945a1a6b98
* write.c (write_relocs): Call SET_SECTION_RELOCS if it is
...
defined.
* config/obj-coff.h (SET_SECTION_RELOCS): Define.
* doc/internals.texi (Object format backend): Document
SET_SECTION_RELOCS.
1999-09-12 03:44:42 +00:00
Ian Lance Taylor
e723ef7c5f
* write.c (dump_section_relocs): Call print_symbol_value_1 to
...
print the symbol, rather than printing it here.
1999-09-11 Donn Terry <donn@interix.com>
* write.c (adjust_reloc_syms): Print adjusted fixup.
1999-09-11 14:59:14 +00:00
Alan Modra
b77ad1d4c9
Fix an overflow checking bug uncovered when a 32 bit target is compiled
...
with a 64 bit bfd.
1999-07-28 23:19:26 +00:00
Ian Lance Taylor
14ad458a39
* write.c (cvt_frag_to_fill): Use frag file and line in rs_org
...
error message.
(relax_segment): Likewise. After giving a rs_org error, convert
the frag to rs_align to avoid cascading errors.
1999-07-14 14:02:33 +00:00
Ian Lance Taylor
ab9da55419
* Many files: Changes to avoid gcc warnings: Add ATTRIBUTE_UNUSED
...
as appropriate. Fill in structure initializations. Add variable
initializations. Add casts.
* dwarf2dbg.c (print_stats): Change i to size_t.
* listing.c (listing_listing): Change list_line to unsigned int.
1999-07-11 20:20:04 +00:00
Ian Lance Taylor
7565ed77a1
* write.c (adjust_reloc_syms): Rather than never reducing reloc
...
which refer to symbols in linkonce sections, permit reducing the
relocs if the symbol is local.
1999-06-12 22:15:51 +00:00
Ian Lance Taylor
b9e57a387a
* subsegs.c (subseg_text_p): New function.
...
* as.h (subseg_text_p): Declare.
* read.c (do_align): Use subseg_text_p to set the default fill.
* write.c (subsegs_finish): Likewise.
* config/obj-coff.c (write_object_file): Likewise.
* config/tc-i386.h (md_maybe_text): Don't define.
(md_do_align): Use subseg_text_p to set the default fill.
* config/tc-m32r.c (m32r_do_align): Likewise.
* config/tc-sh.c (sh_do_align): Likewise.
* config/tc-sparc.h (md_do_align): Likewise.
1999-06-12 16:49:51 +00:00
Ian Lance Taylor
76171f81c7
1999-06-11 Martin Dorey <mdorey@madge.com>
...
* write.c (fixup_segment): Don't add symbol value for i960 ELF.
* config/tc-i960.c (s_leafproc): Don't call tc_set_bal_of_cal if
OBJ_ELF.
(md_apply_fix): Simplify BFD_ASSEMBLER handling.
1999-06-11 19:03:06 +00:00
Ian Lance Taylor
49309057b4
Add support for storing local symbols in a small structure to save
...
memory when assembling large files.
* as.h: Don't include struc-symbol.h.
(symbolS): Add typedef.
* symbols.c: Include struc-symbol.h.
(local_hash): New static variable.
(save_symbol_name): New static function, from symbol_create.
(symbol_create): Call save_symbol_name.
(local_symbol_count): New static variable.
(local_symbol_conversion_count): Likewise.
(LOCAL_SYMBOL_CHECK): Define.
(local_symbol_make): New static function.
(local_symbol_convert): New static function.
(colon): Handle local symbols. Create local symbol for local
label name.
(symbol_table_insert): Handle local symbols.
(symbol_find_or_make): Create local symbol for local label name.
(symbol_find_base): Check for local symbol.
(symbol_append, symbol_insert): Check for local symbols.
(symbol_clear_list_pointers, symbol_remove): Likewise.
(verify_symbol_chain): Likewise.
(copy_symbol_attributes): Likewise.
(resolve_symbol_value): Handle local symbols.
(resolve_local_symbol): New static function.
(resolve_local_symbol_values): New function.
(S_GET_VALUE, S_SET_VALUE): Handle local symbols.
(S_IS_FUNCTION, S_IS_EXTERNAL, S_IS_WEAK, S_IS_COMMON): Likewise.
(S_IS_DEFINED, S_IS_DEBUG, S_IS_LOCAL, S_GET_NAME): Likewise.
(S_GET_SEGMENT, S_SET_SEGMENT, S_SET_EXTERNAL): Likewise.
(S_CLEAR_EXTERNAL, S_SET_WEAK, S_SET_NAME): Likewise.
(symbol_previous, symbol_next): New functions.
(symbol_get_value_expression): Likewise.
(symbol_set_value_expression): Likewise.
(symbol_set_frag, symbol_get_frag): Likewise.
(symbol_mark_used, symbol_clear_used, symbol_used_p): Likewise.
(symbol_mark_used_in_reloc): Likewise.
(symbol_clear_used_in_reloc, symbol_used_in_reloc_p): Likewise.
(symbol_mark_mri_common, symbol_clear_mri_common): Likewise.
(symbol_mri_common_p): Likewise.
(symbol_mark_written, symbol_clear_written): Likewise.
(symbol_written_p): Likewise.
(symbol_mark_resolved, symbol_resolved_p): Likewise.
(symbol_section_p, symbol_equated_p): Likewise.
(symbol_constant_p): Likewise.
(symbol_get_bfdsym, symbol_set_bfdsym): Likewise.
(symbol_get_obj, symbol_set_obj): Likewise.
(symbol_get_tc, symbol_set_tc): Likewise.
(symbol_begin): Initialize local_hash.
(print_symbol_value_1): Handle local symbols.
(symbol_print_statistics): Print local symbol statistics.
* symbols.h: Include "struc-symbol.h" if not BFD_ASSEMBLER.
Declare new symbols.c functions. Move many declarations here from
struc-symbol.h.
(SYMBOLS_NEED_BACKPOINTERS): Define if needed.
* struc-symbol.h (SYMBOLS_NEED_BACKPOINTERS): Don't set.
(struct symbol): Move bsym to make it clearly the first field.
Remove TARGET_SYMBOL_FIELDS.
(symbolS): Don't typedef.
(struct broken_word): Remove.
(N_TYPE_seg, seg_N_TYPE): Move to symbol.h.
(SEGMENT_TO_SYMBOL_TYPE, N_REGISTER): Likewise.
(symbol_clear_list_pointers): Likewise.
(symbol_insert, symbol_remove): Likewise.
(symbol_previous, symbol_append): Likewise.
(verify_symbol_chain, verify_symbol_chain_2): Likewise.
(struct local_symbol): Define.
(local_symbol_converted_p, local_symbol_mark_converted): Define.
(local_symbol_resolved_p, local_symbol_mark_resolved): Define.
(local_symbol_get_frag, local_symbol_set_frag): Define.
(local_symbol_get_real_symbol): Define.
(local_symbol_set_real_symbol): Define.
Define.
* write.c (write_object_file): Call resolve_local_symbol_values.
* config/obj-ecoff.h (OBJ_SYMFIELD_TYPE): Define.
(TARGET_SYMBOL_FIELDS): Don't define.
* config/obj-elf.h (OBJ_SYMFIELD_TYPE): Add local field. If
ECOFF_DEBUGGING, add ECOFF fields.
(ELF_TARGET_SYMBOL_FIELDS, TARGET_SYMBOL_FIELDS): Don't define.
* config/obj-multi.h (struct elf_obj_sy): Add local field. If
ECOFF_DEBUGGING, add ECOFF fields.
(ELF_TARGET_SYMBOL_FIELDS, TARGET_SYMBOL_FIELDS): Don't define.
(ECOFF_DEBUG_TARGET_SYMBOL_FIELDS): Don't define.
* config/tc-mcore.h: Don't include struc-symbol.h.
(TARGET_SYMBOL_FIELDS): Don't define.
(struct mcore_tc_sy): Define.
(TC_SYMFIELD_TYPE): Define.
* Many files: Use symbolS instead of struct symbol. Use new
accessor functions rather than referring to symbolS fields
directly.
* read.c (s_mri_common): Don't add in value of line_label.
* config/tc-mips.c (md_apply_fix): Correct parenthesization when
checking for SEC_LINK_ONCE.
* config/tc-sh.h (sh_fix_adjustable): Declare.
1999-06-03 00:29:48 +00:00
Alan Modra
6d4d30bb14
/
...
Move bitfield overflow checks to after the md_apply_fix call in
fixup_segment so that md_apply_fix has a chance to modify value.
Handle 8 and 16-bit pcrel relocs for i386.
Prototypes and other minor code cleanups.
1999-05-17 03:21:46 +00:00
Richard Henderson
252b5132c7
19990502 sourceware import
1999-05-03 07:29:11 +00:00