killed-outside.exp regresses with "maint set target-non-stop on". The
logs show:
(gdb) continue
Continuing.
infrun: clear_proceed_status_thread (Thread 9028.9028)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming Thread 9028.9028
Sending packet: $Z0,3615a03966,1#4b... Notification received: Stop:X9;process:2344
Packet received: E01
Sending packet: $Z0,3615a13970,1#47...Packet received: E01
Sending packet: $Z0,3615a14891,1#4a...Packet received: E01
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [Thread 9028.9028] at 0x4005e4
Sending packet: $vCont;c:p2344.2344#1a...Packet received: E.target not running.
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n</threads>\n
Sending packet: $vStopped#55...Packet received: OK
Unexpected vCont reply in non-stop mode: E.target not running.
(gdb) remote_async_inferior_event_handler
infrun: target_wait (-1.0.0, status) =
infrun: 9028.0.0 [process 9028],
infrun: status->kind = signalled, signal = GDB_SIGNAL_KILL
infrun: TARGET_WAITKIND_SIGNALLED
Program terminated with signal SIGKILL, Killed.
The program no longer exists.
infrun: stop_waiting
infrun: clear_step_over_info
infrun: stop_all_threads
remote_thread_exit_events(1)
Note the "Unexpected vCont reply" error.
I traced it to a problem in status_pending_p_callback. It resumes an
LWP when it shouldn't.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (thread_still_has_status_pending_p): Don't check
vCont;t here.
(lwp_resumed): New function.
(status_pending_p_callback): Return early if the LWP is not
supposed to be resumed.
When testing with "maint set target-non-stop on", a few
threading-related tests expose an issue that requires new RSP packets.
Say there are 3 threads running, 1-3. If GDB tries to stop thread 1,
2 and 3, and then waits for their stops, but meanwhile say, thread 2
exits, GDB hangs forever waiting for a stop for thread 2 that won't
ever happen.
This patch fixes the issue by adding support for thread exit events to
the protocol. However, we don't want these always enabled, as they're
useless most of the time, and would slow down remote debugging. So I
made it so that GDB can enable/disable them, and then made gdb do that
around the cases that need it, which currently is only
infrun.c:stop_all_threads.
In turn, if we have thread exit events, then the extra "thread x
exited" traffic slows down attach-many-short-lived-threads.exp enough
that gdb has trouble keeping up with new threads that are spawned
while gdb tries to stop existing ones. To fix that I added support
for the counterpart thread created events too. Enabling those when we
try to stop threads ensures that new threads never get a chance to
themselves start new threads, killing the race.
gdb/doc/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Remote Configuration): List "set/show remote
thread-events" command in configuration table.
(Stop Reply Packets): Document "T05 create" stop
reason and 'w' stop reply.
(General Query Packets): Document QThreadEvents packet. Document
QThreadEvents qSupported feature.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Assert that the LWP's
waitstatus is TARGET_WAITKIND_IGNORE. If GDB wants to hear about
thread create events, leave the new child's status pending.
(linux_low_filter_event): If GDB wants to hear about thread exit
events, leave the LWP marked dead and don't delete it.
(linux_wait_for_event_filtered): Don't check for thread exit.
(filter_exit_event): New function.
(linux_wait_1): Use it, when returning an exit event.
(linux_resume_one_lwp_throw): Assert that the LWP's
waitstatus is TARGET_WAITKIND_IGNORE.
* remote-utils.c (prepare_resume_reply): Handle
TARGET_WAITKIND_THREAD_CREATED and TARGET_WAITKIND_THREAD_EXITED.
* server.c (report_thread_events): New global.
(handle_general_set): Handle QThreadEvents.
(handle_query) <qSupported>: Handle and report QThreadEvents+;
(handle_target_event): Handle TARGET_WAITKIND_THREAD_CREATED and
TARGET_WAITKIND_THREAD_EXITED.
* server.h (report_thread_events): Declare.
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* NEWS (New commands): Mention "set/show remote thread-events"
commands.
(New remote packets): Mention thread created/exited stop reasons
and QThreadEvents packet.
* infrun.c (disable_thread_events): New function.
(stop_all_threads): Disable/enable thread create/exit events.
Handle TARGET_WAITKIND_THREAD_EXITED.
(handle_inferior_event_1): Handle TARGET_WAITKIND_THREAD_CREATED
and TARGET_WAITKIND_THREAD_EXITED.
* remote.c (remove_child_of_pending_fork): Also remove threads of
threads that have TARGET_WAITKIND_THREAD_EXITED events.
(remote_parse_stop_reply): Handle "create" magic register. Handle
'w' stop reply.
(initialize_remote): Install remote_thread_events as
to_thread_events target hook.
(remote_thread_events): New function.
* target-delegates.c: Regenerate.
* target.c (target_thread_events): New function.
* target.h (struct target_ops) <to_thread_events>: New field.
(target_thread_events): Declare.
* target/waitstatus.c (target_waitstatus_to_string): Handle
TARGET_WAITKIND_THREAD_CREATED and TARGET_WAITKIND_THREAD_EXITED.
* target/waitstatus.h (enum target_waitkind)
<TARGET_WAITKIND_THREAD_CREATED, TARGET_WAITKIND_THREAD_EXITED):
New values.
Running attach-many-short-lived-threads.exp with the extended-remote
board with "maint set target-non-stop on" times out -- the attach
never completes. Enabling infrun debug logs, we see that GDB is stuck
stopping all threads:
infrun: target_wait (-1.0.0, status) =
infrun: 1639.22213.0 [Thread 1639.22213],
infrun: status->kind = stopped, signal = GDB_SIGNAL_0
infrun: Thread 1639.22260 not executing
infrun: Thread 1639.22256 not executing
infrun: Thread 1639.22258 not executing
infrun: Thread 1639.22257 not executing
infrun: Thread 1639.22259 not executing
infrun: Thread 1639.22255 not executing
infrun: Thread 1639.22253 executing, already stopping
infrun: Thread 1639.22251 executing, already stopping
infrun: Thread 1639.22252 executing, already stopping
infrun: Thread 1639.22250 executing, already stopping
infrun: Thread 1639.22254 executing, already stopping
infrun: Thread 1639.22247 executing, already stopping
infrun: Thread 1639.22213 not executing
infrun: Thread 1639.22207 not executing
infrun: Thread 1639.22201 not executing
infrun: Thread 1639.22219 not executing
infrun: Thread 1639.1639 not executing
** HANG HERE **
GDB is waiting for the stop replies of any of those "already stopping"
threads. Take 22253 for example. On the gdbserver logs we see:
...
resume_stop request for LWP 22253
stopping LWP 22253
Sending sigstop to lwp 22253
linux_resume done
...
and:
my_waitpid (-1, 0x40000001)
my_waitpid (-1, 0x80000001): status(3057f), 22253
LWFE: waitpid(-1, ...) returned 22253, ERRNO-OK
LLW: waitpid 22253 received Trace/breakpoint trap (stopped)
pc is 0x3615ef4ce1
HEW: Got clone event from LWP 22253, new child is LWP 22259
but from here on, we never see any other event for LWP 22253. In
particular, we never see the expected SIGSTOP (from "Sending sigstop"
above). The issue is that linux_resume_stopped_resumed_lwps never
re-resumes the 22253 after the clone event.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (resume_stopped_resumed_lwps): Don't check whether
the thread's last_resume_kind was resume_stop.
With "maint set target-non-stop on", the attach tests occasionally
crash gdbserver.
Basically, gdb attaches with vAttach;PID, and then shortly after reads
the xml target description for that process, to figure out the
process' architecture. On the gdbserver side, the target description
is only filled in when the first process/thread in the thread group
reports its initial PTRACE_ATTACH SIGSTOP. So if GDB is fast enough,
it can read the target description _before_ that initial stop, and
then gdbserver dies dereferencing a NULL tdesc pointer.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_attach): In non-stop mode, wait for one stop
before returning.
There's currently no non-stop equivalent of the all-stop ^C (\003)
"packet" that GDB sends when a ctrl-c is pressed while a foreground
command is active. There's vCont;t, but that's defined to cause a
"signal 0" stop.
This fixes many tests that type ^C, when testing with extended-remote
with "maint set target-non-stop on". E.g.:
Continuing.
talk to me baby
PASS: gdb.base/interrupt.exp: process is alive
a
a
PASS: gdb.base/interrupt.exp: child process ate our char
^C
[Thread 22730.22730] #1 stopped.
0x0000003615ee6650 in __read_nocancel () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
(gdb) FAIL: gdb.base/interrupt.exp: send_gdb control C
p func1 ()
gdb/
2015-11-30 Pedro Alves <palves@redhat.com>
* NEWS (New remote packets): Mention vCtrlC.
* remote.c (PACKET_vCtrlC): New enum value.
(async_remote_interrupt): Call target_interrupt instead of
target_stop.
(remote_interrupt_as): Remove 'ptid' parameter.
(remote_interrupt_ns): New function.
(remote_stop): Adjust.
(remote_interrupt): If the target is in non-stop mode, try
interrupting with vCtrlC.
(initialize_remote): Install set remote ctrl-c packet.
gdb/doc/
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Bootstrapping): Add "interrupting remote targets"
anchor.
(Packets): Document vCtrlC.
gdb/gdbserver/
2015-11-30 Pedro Alves <palves@redhat.com>
* server.c (handle_v_requests): Handle vCtrlC.
This fixes a gdbserver crash when running
gdb.threads/non-ldr-exc-1.exp with "maint set target-non-stop on".
The problem is that qSymbol is called when gdbserver has
current_thread == NULL.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdbthread.h (find_any_thread_of_pid): Declare.
* inferiors.c (thread_of_pid, find_any_thread_of_pid): New
functions.
* server.c (handle_query): If current_thread is NULL, look for
another thread of the selected process.
This patch adds support for thread names in the remote protocol, and
updates gdb/gdbserver to use it. The information is added to the XML
description sent in response to the qXfer:threads:read packet.
gdb/ChangeLog:
* linux-nat.c (linux_nat_thread_name): Replace implementation by call
to linux_proc_tid_get_name.
* nat/linux-procfs.c (linux_proc_tid_get_name): New function,
implementation inspired by linux_nat_thread_name.
* nat/linux-procfs.h (linux_proc_tid_get_name): New declaration.
* remote.c (struct private_thread_info) <name>: New field.
(free_private_thread_info): Free name field.
(remote_thread_name): New function.
(thread_item_t) <name>: New field.
(clear_threads_listing_context): Free name field.
(start_thread): Get name xml attribute.
(thread_attributes): Add "name" attribute.
(remote_update_thread_list): Copy name field.
(init_remote_ops): Assign remote_thread_name callback.
* target.h (target_thread_name): Update comment.
* NEWS: Mention remote thread name support.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_target_ops): Use linux_proc_tid_get_name.
* server.c (handle_qxfer_threads_worker): Refactor to include thread
name in reply.
* target.h (struct target_ops) <thread_name>: New field.
(target_thread_name): New macro.
gdb/doc/ChangeLog:
* gdb.texinfo (Thread List Format): Mention thread names.
This crash is observable by debugging a threaded program on LynxOS.
On the GDB side, this is what we would see:
% gdb q
(gdb) target remote machine:4444
(gdb) break q.adb:6
(gdb) cont
[gdb hits breakpoint]
(gdb) cont
Remote connection closed <<<--- expected: [Inferior 1 (Remote target) exited normally]
On the gdbserver side, which was launched as usual:
% gdbserver --once :4444 q
Segmentation fault (core dumped)
Ooops!
The problem happens while GDB is trying to handle the thread termination
event of the thread that hit the breakpoint. It started happening after
the following change was made:
commit 96e7a1eb6d
Date: Fri Oct 16 11:08:38 2015 -0400
Subject: gdbserver: Reset current_thread when the thread is removed.
Reset current_thread and make sure 'remove_process' is used
after all associated threads have been removed first.
More precisely:
. GDBserver receives the execution-resume order;
. lynx-low resumes it succesfully, and then relies on lynx_wait_1
to wait for the next event;
. We quickly receive one, which lynx_wait_1 analyzes to be
a "thread exit" event, and therefore does...
case SIGTHREADEXIT:
remove_thread (find_thread_ptid (new_ptid));
lynx_continue (new_ptid);
goto retry;
=> remove_thread causes current_thread to be set to NULL...
(that's the recent change mentioned above)
=> ... which causes problems during lynx_continue, because
it calls lynx_resume, which calls regcache_invalidate,
which unfortunately assumes that CURRENT_THREAD is not NULL:
void
regcache_invalidate (void)
{
/* Only update the threads of the current process. */
SEGV!--> int pid = ptid_get_pid (current_thread->entry.id);
find_inferior (&all_threads, regcache_invalidate_one, &pid);
}
Since the problem at hand is caused by trying to figure out which
inferior to reset the regcache for, and since lynx_resume actually
had that info, this patch fixes the problem by introducing a new
routine called regcache_invalidate_pid, which invalidates the cache
of the given pid; and then modifies lynx_resume use that new routine
rather than relying on regcache_invalidate to invalidate the regcache
of the expected inferior.
gdb/gdbserver/ChangeLog:
* regcache.h (regcache_invalidate_pid): Add declaration.
* regcache.c (regcache_invalidate_pid): New function, extracted
from regcache_invalidate.
(regcache_invalidate): Reimplement using regcache_invalidate_pid.
Add trivial documentation comment.
* lynx-low.c: Use regcache_invalidate_pid instead of
regcache_invalidate.
See the comment added in configure.ac for more details behind
this change.
gdb/gdbserver/ChangeLog:
* configure.ac: Do not call AC_CHECK_TYPES for Elf32_auxv_t
and Elf64_auxv_t if the target is Android.
The target_process_qsupported method is called for each qSupported
feature that the common code does not recognize. The only current
implementation, for x86 Linux (x86_linux_process_qsupported), assumes
that it either is called with the "xmlRegisters=i386" feature, or that
it is isn't called at all, indicating the connected GDB predates x86
XML descriptions.
That's a bad assumption however. If GDB sends in a new/unknown (to
core gdbserver) feature after "xmlRegisters=i386", say, something like
qSupported:xmlRegisters=i386;UnknownFeature+, then when
target_process_qsupported is called for "UnknownFeature+",
x86_linux_process_qsupported clears the 'use_xml' global and calls
x86_linux_update_xmltarget, and gdbserver ends up _not_ reporting a
XML description...
This commit changes the target_process_qsupported API to instead pass
down a vector of unprocessed qSupported features in one go.
(There's an early call to target_process_qsupported(NULL) that
indicates "starting qSupported processing". There's no matching call
to mark the end of processing, though. I first fixed this by passing
(char *)-1 to indicate that, and adjusted the x86 backend to only
clear 'use_xml' when qSupported processing starts, and then only call
x86_linux_update_xmltarget() when (char *)-1 was passed. However, I
wasn't that happy with the hack and came up this alternative version.)
gdb/gdbserver/ChangeLog:
2015-11-19 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_process_qsupported): Change prototype.
Adjust.
* linux-low.h (struct linux_target_ops) <process_qsupported>:
Change prototype.
* linux-x86-low.c (x86_linux_process_qsupported): Change prototype
and adjust to loop over all features.
* server.c (handle_query) <qSupported>: Adjust to call
target_process_qsupported once, passing it a vector of unprocessed
features.
* target.h (struct target_ops) <process_qsupported>: Change
prototype.
(target_process_qsupported): Adjust.
Both x86_64 GNU/Linux and x86_64 mingw-w64 build cleanly with
--enable-targets=all. This enables -Werror by default in C++ mode
too, in order to let the buildbot catch C++ build regressions for us.
gdb/ChangeLog:
2015-11-19 Pedro Alves <palves@redhat.com>
* configure.ac (ERROR_ON_WARNING): Don't check whether in C++
mode.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2015-11-19 Pedro Alves <palves@redhat.com>
* configure.ac (ERROR_ON_WARNING): Don't check whether in C++
mode.
* configure: Regenerate.
Both x86_64 GNU/Linux and x86_64 mingw-w64 build cleanly with
--enable-targets=all. Let's drop the -fpermissive hack, in order to
let the buildbot catch C++ build regressions for us.
gdb/ChangeLog:
2015-11-19 Pedro Alves <palves@redhat.com>
* build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Remove -fpermissive.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2015-11-19 Pedro Alves <palves@redhat.com>
* configure: Regenerate.
The patch fixes the following errors in C++ build,
gdb/gdbserver/linux-aarch64-low.c: In function 'int emit_data_processing(uint32_t*, aarch64_opcodes, aarch64_register, aarch64_register, aarch64_operand)':
gdb/gdbserver/linux-aarch64-low.c:1071:52: error: invalid conversion from 'unsigned int' to 'aarch64_opcodes' [-fpermissive]
return emit_data_processing_reg (buf, opcode | operand_opcode, rd,
^
gdb/gdbserver:
2015-11-19 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (emit_data_processing_reg): Change opcode
type to uint32_t.
This patch moves the enum definition out of the scope of struct, and
fixes the following error.
gdb/gdbserver/linux-aarch64-low.c:681:18: error: 'OPERAND_REGISTER' was not declared in this scope
operand.type = OPERAND_REGISTER;
^
gdb/gdbserver:
2015-11-19 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (enum aarch64_operand_type): New.
(struct aarch64_operand): Move enum out.
Commit 91ee7171d0 (MinGW and attribute format(printf/gnu_printf))
made common/common-defs.h depend on gnulib's substitute headers.
Turns out that that broke the gdbserver/ipa build (as the buildbots
discovered) because nothing is making sure that gnulib is built before
the ipa is.
gdb/gdbserver/ChangeLog:
2015-11-18 Pedro Alves <palves@redhat.com>
* Makefile.in (all_object_files): Add $IPA_OBJS.
Building in C++ caught a buglet here:
../../../src/gdb/gdbserver/win32-low.c: In function 'void win32_resume(thread_resume*, size_t)':
../../../src/gdb/gdbserver/win32-low.c:929:11: error: invalid conversion from 'int' to 'gdb_signal' [-fpermissive]
sig = resume_info[0].sig;
^
../../../src/gdb/gdbserver/win32-low.c:934:11: error: invalid conversion from 'int' to 'gdb_signal' [-fpermissive]
sig = 0;
^
Signals in the "struct thread_resume" structure are host signals, not
gdb signals. The current code happens to work because the only
signals that the Windows port supports have the same number as the gdb
equivalent (see handle_exception for the win32 exception -> gdb signal
mapping).
gdb/gdbserver/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* win32-low.c (win32_resume): Use gdb_signal_from_host,
GDB_SIGNAL_0 and gdb_signal_to_string.
Fixes:
../../../src/gdb/gdbserver/win32-low.c: In function 'int win32_kill(int)':
../../../src/gdb/gdbserver/win32-low.c:823:46: error: invalid conversion from 'int' to 'target_waitkind' [-fpermissive]
struct target_waitstatus our_status = { 0 };
^
handle_output_debug_string doesn't use the parameter for anything
(it's an output parameter in the gdb version), so just remove it.
gdb/gdbserver/ChangeLog:
2015-11-17 Pedro Alves <palves@redhat.com>
* win32-low.c (handle_output_debug_string): Remove parameter.
(win32_kill): Remove our_status local and adjust call to
handle_output_debug_string.
(get_child_debug_event): Adjust call to
handle_output_debug_string.
Fixes
/home/simark/src/binutils-gdb/gdb/gdbserver/linux-mips-low.c: In function ‘void mips_add_watchpoint(arch_process_info*, CORE_ADDR, int, int)’:
/home/simark/src/binutils-gdb/gdb/gdbserver/linux-mips-low.c:368:19: error: invalid conversion from ‘int’ to ‘target_hw_bp_type’ [-fpermissive]
new_watch->type = watch_type;
^
gdb/gdbserver/ChangeLog:
* linux-mips-low.c (mips_linux_new_thread): Change type of
watch_type to enum target_hw_bp_type.
Trivial casts for C++.
Fixes things like
In file included from /home/simark/src/binutils-gdb/gdb/gdbserver/../common/common-defs.h:39:0,
from /home/simark/src/binutils-gdb/gdb/gdbserver/server.h:22,
from /home/simark/src/binutils-gdb/gdb/gdbserver/linux-arm-low.c:19:
/home/simark/src/binutils-gdb/gdb/gdbserver/linux-arm-low.c: In function ‘int arm_get_hwcap(long unsigned int*)’:
/home/simark/src/binutils-gdb/gdb/gdbserver/../../include/libiberty.h:711:38: error: invalid conversion from ‘void*’ to ‘unsigned char*’ [-fpermissive]
# define alloca(x) __builtin_alloca(x)
^
/home/simark/src/binutils-gdb/gdb/gdbserver/linux-arm-low.c:807:25: note: in expansion of macro ‘alloca’
unsigned char *data = alloca (8);
^
gdb/gdbserver/ChangeLog:
* linux-aarch32-low.c (arm_fill_gregset): Add cast.
(arm_store_gregset): Likewise.
* linux-arm-low.c (arm_get_hwcap): Likewise.
(arm_read_description): Likewise.
g++ doesn't like that we forward-declare a variable that is initialized
later in the file. It's easy enough to re-order things to fix it.
Fixes
/home/simark/src/binutils-gdb/gdb/gdbserver/linux-ppc-low.c:663:28: error: redefinition of ‘usrregs_info ppc_usrregs_info’
static struct usrregs_info ppc_usrregs_info =
^
/home/simark/src/binutils-gdb/gdb/gdbserver/linux-ppc-low.c:381:28: note: ‘usrregs_info ppc_usrregs_info’ previously declared here
static struct usrregs_info ppc_usrregs_info;
^
gdb/gdbserver/ChangeLog:
* linux-ppc-low.c (ppc_usrregs_info): Remove
forward-declaration.
(ppc_arch_setup): Move lower in file.
Fixes on i386:
../../../binutils-gdb/gdb/gdbserver/proc-service.c: In function ps_pdread:
../../../binutils-gdb/gdb/gdbserver/proc-service.c:83:25: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
../../../binutils-gdb/gdb/gdbserver/proc-service.c: In function ps_pdwrite:
../../../binutils-gdb/gdb/gdbserver/proc-service.c:93:30: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
I could have kept both casts:
(CORE_ADDR) (uintptr_t) addr
but it's cleaner this way. The uintptr_t implicitely gets promoted to a
CORE_ADDR, which is at least as long as uintptr_t.
gdb/gdbserver/ChangeLog:
* proc-service.c (ps_pdread): Change CORE_ADDR cast to uintptr_t.
(ps_pdwrite): Likewise.
gdb/gdbserver/ChangeLog:
* linux-arm-low.c (arm_new_thread): Move pointer dereference
to after assert checks.
Signed-off-by: Henrik Wallin <henrik.wallin@windriver.com>
The casts are required because ps_pd{read,write} must respect a fixed
interface.
gdb/gdbserver/ChangeLog:
* proc-service.c (ps_pdread): Add/adjust casts.
(ps_pdwrite): Add/adjust casts.
... for C++.
Fixes:
gdb/gdbserver/mem-break.c:204:28: error: invalid conversion from 'int' to 'bkpt_type' [-fpermissive]
gdb/gdbserver/ChangeLog:
2015-10-29 Pedro Alves <palves@redhat.com>
* mem-break.c (Z_packet_to_bkpt_type): Add cast.
... as needed for C++.
tpoint->handle is a generic 'void *' handle.
gdb/gdbserver/ChangeLog:
2015-10-29 Pedro Alves <palves@redhat.com>
* tracepoint.c (clear_installed_tracepoints): Add casts.
This is code parsing RSP signal numbers, checking whether the numbers
are indeed valid/known GDB signals, and then converting to host signal
numbers. I considered adding temporary enum gdb_signal variables
instead, but didn't really like the result.
gdb/gdbserver/ChangeLog:
2015-10-29 Pedro Alves <palves@redhat.com>
* server.c (handle_v_cont, process_serial_event): Add enum
gdb_signal casts to signal parsing code.
Fixes:
../../../src/gdb/gdbserver/linux-low.c: In function ‘int linux_low_read_btrace(btrace_target_info*, buffer*, int)’:
../../../src/gdb/gdbserver/linux-low.c:6827:48: error: invalid conversion from ‘int’ to ‘btrace_read_type’ [-fpermissive]
err = linux_read_btrace (&btrace, tinfo, type);
^
In file included from ../../../src/gdb/gdbserver/linux-low.c:98:0:
../../../src/gdb/gdbserver/../nat/linux-btrace.h:116:26: error: initializing argument 3 of ‘btrace_error linux_read_btrace(btrace_data*, btrace_target_info*, btrace_read_type)’ [-fpermissive]
extern enum btrace_error linux_read_btrace (struct btrace_data *btrace,
^
The cyclic dependency the comment talks about is no longer relevant:
https://sourceware.org/ml/gdb-patches/2015-10/msg00643.html
gdb/gdbserver/ChangeLog:
2015-10-29 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_low_read_btrace): Change type of 'type'
parameter.
* server.c (handle_qxfer_btrace): Change type of 'type'
local.
* target.h (struct target_ops) <read_btrace>: Change type of
'type' parameter. Update comment.
gdb/ChangeLog:
* nat/linux-nat.h (__SIGRTMIN): Move here from gdbserver/linux-low.c.
gdb/gdbserver/ChangeLog:
* linux-low.c (__SIGRTMIN): Move to nat/linux-nat.h.
gdb/ChangeLog:
* common/gdb_wait.h (W_STOPCODE): Define, moved here from
gdbserver/linux-low.c.
(WSETSTOP): Simplify.
gdb/gdbserver/ChangeLog:
* linux-low.c (W_STOPCODE): Moved to common/gdb_wait.h.
gdb/ChangeLog:
* linux-thread-db.c (find_new_threads_callback): Cast ti.ti_tid to
unsigned long for debug_printf.
(thread_db_pid_to_str): Ditto.
gdb/gdbserver/ChangeLog:
* thread-db.c (find_one_thread): Cast ti.ti_tid to unsigned long
for debug_printf.
(attach_thread, find_new_threads_callback): Ditto.
This patch fixes the build that was broken by :
https://sourceware.org/ml/gdb-patches/2015-10/msg00369.html
It implements the sw_breakpoint_from_kind operation on these targets and removes
the calls to set_breakpoint_data.
Compiliation tested on win32.
Not tested : nto, spu.
gdb/gdbserver/ChangeLog:
* nto-low.c (nto_sw_breakpoint_from_kind): New function.
(struct target_ops) <sw_breakpoint_from_kind>: Initialize.
(initialize_low): Remove set_breakpoint_data call.
* spu-low.c (spu_sw_breakpoint_from_kind): New function.
(struct target_ops) <sw_breakpoint_from_kind>: Iniitalize.
(initialize_low): Remove set_breakpoint_data call.
* win32-low.c (win32_sw_breakpoint_from_kind): New function.
(struct target_ops) <sw_breakpoint_from_kind>: Initialize.
(initialize_low): Remove set_breakpoint_data call.
This patch moves default_breakpoint_kind_from_pc to target.c and creates a macro
so that all targets can easily use it.
This allows the breakpoint_kind_from_pc operation to be left unimplemented in
targets that do not need it.
This is preparation to fix the win32/nto/spu build that was broken by this
patch: https://sourceware.org/ml/gdb-patches/2015-10/msg00369.html
No regression on Ubuntu 14.04 x86-64 with gdbserver-{native-extended}
gdb/gdbserver/ChangeLog:
* linux-low.c (default_breakpoint_kind_from_pc): Move to target.c.
* mem-break.c (set_breakpoint_at): Use target_breakpoint_kind_from_pc.
* target.c (default_breakpoint_kind_from_pc): Moved from linux-low.c
* target.h (target_breakpoint_kind_from_pc): New macro.
This patch fixes a regression introduced by :
https://sourceware.org/ml/gdb-patches/2015-10/msg00369.html
Tests : gdb.trace/trace-break.exp and gdb.trace/trace-mt.exp would fail on x86
with gdbserver-{native,extended}.
Before this patch, the breakpoint kind set by GDB with a Z packet and the one
set in the case of a tracepoint would be inconsistent on targets that did not
implement breakpoint_kind_from_pc. On x86 for example a breakpoint set by GDB
would have a kind of 1 but a breakpoint set by a tracepoint would have a kind of
0.
This created a missmatch when trying to insert a tracepoint and a breakpoint at
the same location. One of the two breakpoints would be removed with debug
message : "Inconsistent breakpoint kind".
This patch fixes the issue by changing the default 0 breakpoint kind to be
the size of the breakpoint according to sw_breakpoint_from_kind.
The default breakpoint kind must be the breakpoint length to keep consistency
between breakpoints set via GDB and the ones set internally by GDBServer.
No regression on Ubuntu 14.04 x86-64 with gdbserver-{native-extended}
gdb/gdbserver/ChangeLog:
* linux-low.c (default_breakpoint_kind_from_pc): New function.
(linux_breakpoint_kind_from_pc): Use default_breakpoint_kind_from_pc for
the default breakpoint kind.
This patch enables software breakpoints via GDB's Z0 packets on ARM.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* linux-arm-low.c (arm_supports_z_point_type): Add software
breakpoint support.
Before arm_sw_breakpoint_from_kind would use an #ifdef to return the right
arm_breakpoint from the abi or eabi breakpoint type.
arm_breakpoint_at would also check for the arm_breakpoint ||
arm_eabi_breakpoint.
Thus the selected arm_breakpoint would be what arm_sw_breakpoint_from_kind
returned and arm_breakpoint was arm_abi_breakpoint.
This patch makes it more clear by naming those for what they are : 2 separate
entities: arm_abi_breakpoint and arm_eabi_breakpoint and set the current used
one as arm_breakpoint.
This allows a cleaner arm_sw_breakpoint_from_kind as it just returns
arm_breakpoint rather than having the #ifdef in that function.
Any other reference to the arm_breakpoint can now also be clear of #ifdefs...
No regressions on Ubuntu 14.04 on ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* linux-arm-low.c: Refactor breakpoint definitions.
(arm_breakpoint_at): Adjust for arm_abi_breakpoint.
(arm_sw_breakpoint_from_kind): Adjust for arm_breakpoint.
ARM can have multiple breakpoint types based on the instruction set
it's currently in: arm, thumb or thumb2.
GDBServer needs to know what breakpoint is to be inserted at location
when inserting a breakpoint.
This is handled by the breakpoint_kind_from_pc and sw_breakpoint_from_kind
target ops introduced in a previous patch, this patch adds the
arm_breakpoint_kind_from_pc and arm_sw_breakpoint_from_kind implementation so
that the proper breakpoint type is returned based on the pc.
Also in order to share some code with GDB a new file called arm.c have been
introduced in arch/.
While this file does not contain much yet future patches will add more
to it thus the inclusion at this stage.
No regressions on Ubuntu 14.04 on ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* Makefile.in: Add arm.c/o.
* arch/arm.c: New file.
* arch/arm.h: (IS_THUMB_ADDR): Move macro from arm-tdep.c.
(MAKE_THUMB_ADDR): Likewise.
(UNMAKE_THUMB_ADDR): Likewise.
* arm-tdep.c (int thumb_insn_size): Move to arm.c.
(IS_THUMB_ADDR): Move to arm.h.
(MAKE_THUMB_ADDR): Likewise.
(UNMAKE_THUMB_ADDR): Likewise.
* configure.tgt: Add arm.o to all ARM configs.
gdb/gdbserver/ChangeLog:
* Makefile.in: Add arm.c/o.
* configure.srv: Likewise.
* linux-arm-low.c (arm_breakpoint_kinds): New enum.
(arm_breakpoint_kind_from_pc): New function.
(arm_sw_breakpoint_from_kind): Return proper kind.
(struct linux_target_ops) <breakpoint_kind_from_pc>: Initialize.
