number (we are already testing that the correct source line text
gets printed).
* gdb.base/break.exp: Make one test if $usestubs. I'm not sure
that is what is intended, but something needed to be done to get
sunos4 native working again.
* gdb.c++/misc.cc (main): Fix typo (#iffef -> #ifdef).
* findvar.c: Move default def of CANNOT_STORE_REGISTER closer to
the beginning of the code.
* (write_register_gen): New routine. Analogous to
read_register_gen.
* (write_register_bytes): Another rewrite! Make it smarter about
not updating regs with the same value.
* monitor.c (printf_monitor readchar): Use stderr instead of
stdout to output debug info. Also cleanup readchar a little.
* (expect): Make sure that excessive responses are null
terminated.
* (monitor_open): Check for magic number in monitor_ops struct.
Allow multiple commands as init strings. Also, clear all
breakpoints.
* (monitor_resume monitor_wait): Send a command to dump all the
regs for those targets which don't do so when waking up after a
continue command.
* (monitor_wait): Handle excessive response output better.
* (monitor_write_memory): Use block fill, word, and long word
commands (if they exist) to write memory more efficiently.
* General cleanups to use flag bits instead of individual flag
words in monitor_ops struct.
* (monitor_command): Return output from command.
* (monitor_load_srec): Allocate buffer only once. Use alloca.
Wait for load response string instead of using a timeout to start
sending S-records. Fix bug where value of srec_frame shrinks. If
hashmark is set, print `-' for retransmissions. General cleanups.
* (monitor_make_srec): Get rid of S-record default type kludge.
* monitor.h: Use seperate struct for memory and register
read/write commands. Memory commands can come in byte, word,
long, and longlong forms.
* (monitor_ops): Change lots of fields. Generalize some stuff.
Put all flags into flags word. Allow init to be a list of commands.
Add command for clearing all breakpoints, block fill, dumping all
registers.
* remote-est.c: Rewrite to use new monitor conventions.
* config/m68k/est.mt (TDEPFILES): Add monitor.o.
* config/m68k/tm-est.h: Set NUM_REGS to 18.
* testsuite/gdb.base/break.exp: Lots of cleanups. Use gdb_test
more thoroughly.
* findvar.c: Move default def of CANNOT_STORE_REGISTER closer to
the beginning of the code.
* (write_register_gen): New routine. Analogous to
read_register_gen.
* (write_register_bytes): Another rewrite! Make it smarter about
not updating regs with the same value.
* monitor.c (printf_monitor readchar): Use stderr instead of
stdout to output debug info. Also cleanup readchar a little.
* (expect): Make sure that excessive responses are null
terminated.
* (monitor_open): Check for magic number in monitor_ops struct.
Allow multiple commands as init strings. Also, clear all
breakpoints.
* (monitor_resume monitor_wait): Send a command to dump all the
regs for those targets which don't do so when waking up after a
continue command.
* (monitor_wait): Handle excessive response output better.
* (monitor_write_memory): Use block fill, word, and long word
commands (if they exist) to write memory more efficiently.
* General cleanups to use flag bits instead of individual flag
words in monitor_ops struct.
* (monitor_command): Return output from command.
* (monitor_load_srec): Allocate buffer only once. Use alloca.
Wait for load response string instead of using a timeout to start
sending S-records. Fix bug where value of srec_frame shrinks. If
hashmark is set, print `-' for retransmissions. General cleanups.
* (monitor_make_srec): Get rid of S-record default type kludge.
* monitor.h: Use seperate struct for memory and register
read/write commands. Memory commands can come in byte, word,
long, and longlong forms.
* (monitor_ops): Change lots of fields. Generalize some stuff.
Put all flags into flags word. Allow init to be a list of commands.
Add command for clearing all breakpoints, block fill, dumping all
registers.
* remote-est.c: Rewrite to use new monitor conventions.
* config/m68k/est.mt (TDEPFILES): Add monitor.o.
* config/m68k/tm-est.h: Set NUM_REGS to 18.
* testsuite/gdb.base/break.exp: Lots of cleanups. Use gdb_test
more thoroughly.
runto_main is a proc in gdb.exp that will do 'step' for target use
stubs.
* gdb.base/exprs.exp: ditto.
* gdb.base/interrupt.exp: ditto.
* gdb.base/opaque.exp: ditto.
* gdb.base/printcmds.exp: ditto.
* gdb.base/ptype.exp: ditto.
* gdb.base/scope.exp: ditto.
* gdb.base/setvar.exp: ditto.
* gdb.base/signals.exp: ditto.
* gdb.base/twice.exp: ditto.
* gdb.base/break.exp: no run and hit main for stubs. Change line
numbers for breakpoints and info breakpoint.
* gdb.base/break.c: Add #ifdef usestubs for set_debug_traps() and
breakpoint().
* gdb.base/callfuncs.c: ditto.
* gdb.base/exprs: ditto.
* gdb.base/interrupt.c: ditto.
* gdb.base/opaque0.c: ditto.
* gdb.base/printcmds.c: ditto.
* gdb.base/ptype.c: ditto.
* gdb.base/scope0.c: ditto.
* gdb.base/setvar.c: ditto.
* gdb.base/signals.c: ditto.
* gdb.base/twice.c: ditto.
somewhere between `read' and `main.c'. I'm pretty sure the
pattern ".*#\[0-9\].*" was slowing down pattern matching a lot,
and it isn't particularly useful.
* TODO: Remove "handle all print". Also remove item about
checking copyright date (I don't like the idea of a spurious FAIL
based on when we run the tests).
these routines much smarter about updating registers from the
target, only doing so when absolutely necessary. This really
speeds up register modification on some remote targets.
* monitor.c: More cleanups. Get rid of monitor_load_ascii_srec.
BFD makes this unnecessary. Lots of debugging speedups.
* (expect): NULL terminate return string.
* (monitor_open monitor_supply_register parse_register_dump
monitor_wait monitor_fetch_register): Switch to using GNU regexp
library to parse multi-register displays.
* (monitor_read_memory): Read multiple bytes (up to 16) at once.
* (monitor_create_inferior): Call clear_proceed_status to make run
command notice first breakpoint.
* (monitor_load): Clean up. Reset inferior_pid, set pc to start
address and reset symbol table stuff to make loads put things into
a fresh state.
* (monitor_load_srec): Lower sleep time to 1 second.
* monitor.h (struct monitor_ops): Add register_pattern and
supply_register to monitor_ops.
* rom68k-rom.c: Add new support for handling register dumps.
* config/m68k/tm-m68k.h: Define D0_REGNUM and A0_REGNUM for register
dump handling.
CANNOT_STORE_REGISTER to a better place. Fixes ptrace I/O errors
found by test suite during function calls, which attempts to write
unwritable registers.
(sh-hitachi-hms): New target.
* mpw-make.in (BISON): Use byacc instead of bison.
(VERSION): Bump to 4.14.1.
(*-pinsn.*): Remove mentions everywhere.
(all): Don't build MacGDB.
(gdb, SiowGDB): Depend on Version.r.
(Version.r): Generate from version info.
* main.c (main): Pass program name to START_PROGRESS, END_PROGRESS.
(main) [MPW]: Remove debugging hook.
* mac-xdep.c (debug_openp): New flag.
(mac_init): Set flag if env variable defined.
* ser-mac.c (mac_open): Clarify error message.
(mac_readchar): Call PROGRESS while looping.
(mac_write): Call sleep instead of sec_sleep.
(sec_sleep): Remove.
* source.c (openp) [MPW]: Only print debugging info if debugging.
* utils.c (query) [MPW]: Clarify that behavior is a bug.
* gdb.base/a2-run.exp: Skip this file if noargs is set.
* gdb.base/break.c: Change things around so that this program
doesn't depend upon args. This is necessary to make remote
targets work (in general, they can't take args).
* gdb.base/break.exp: Don't try to send args to program. Don't
expect output. Also, replace lots of code with gdb_test.
these routines much smarter about updating registers from the
target, only doing so when absolutely necessary. This really
speeds up register modification on some remote targets.
* monitor.c: More cleanups. Get rid of monitor_load_ascii_srec.
BFD makes this unnecessary. Lots of debugging speedups.
* (expect): NULL terminate return string.
* (monitor_open monitor_supply_register parse_register_dump
monitor_wait monitor_fetch_register): Switch to using GNU regexp
library to parse multi-register displays.
* (monitor_read_memory): Read multiple bytes (up to 16) at once.
* (monitor_create_inferior): Call clear_proceed_status to make run
command notice first breakpoint.
* (monitor_load): Clean up. Reset inferior_pid, set pc to start
address and reset symbol table stuff to make loads put things into
a fresh state.
* (monitor_load_srec): Lower sleep time to 1 second.
* monitor.h (struct monitor_ops): Add register_pattern and
supply_register to monitor_ops.
* rom68k-rom.c: Add new support for handling register dumps.
argument be an int, not a char. Using a prototype followed by an
old-style function definition in a case where an argument is
widened is a GCC-ism not supported by the native AIX compiler.
printing of '\'' (which is what the comment says we are testing,
even though we were not), not '''.
(test_integer_literals_rejected): Test that printing ''' is an error.
* gdb.fortran/exprs.exp, gdb.fortran/types.exp,
gdb.chill/chexp.exp, gdb.base/printcmds.exp,
gdb.c++/cplusfuncs.exp, gdb.chill/callch.exp, gdb.chill/misc.exp,
gdb.chill/pr-6292.exp, gdb.chill/string.exp, gdb.chill/tuples.exp:
Use gdb_test not test_print_accept.
* lib/gdb.exp: Remove test_print_accept.
unsigned char; the bug (PR 1821) is fixed.
* gdb.base/scope.exp: Remove xfails for PRs 1843 and 1868.
* gdb.base/scope.exp (test_at_localscopes): Call pass for
successful tests--makes xfailing them work right.
only \r\n, not .*. The test can pass .* as the last thing in
$pattern if that is what it wants. In addition to providing this
flexibility, this change should speed up pattern matching in cases
where the pattern already ended with .* (there were a number of
them). This change also helps catch bad patterns--in the old
scheme the typo "char \*" instead of "char \\*" would pass. Now
it is caught.
* Many .exp files: Update callers.
"p '\'", which is the same as "p ''" once tcl gets done with
quoting, to "p '\\'", which I suspect is what is intended (one
backslash gets sent to GDB).
* gdb.base/printcmds.exp (test_artificial_arrays): New tests.
test, it causes stepping out of call_after_alloca_subr with
optimizing compilers.
(localvars_in_indirect_call): Consume GDB prompt if `finish'
fails.
* gdb.c++/misc.cc (class Contains_static_instance,
class Contains_nested_static_instance),
gdb.c++/classes.exp (test_static_members): Test printing of
a class that contains a static instance of the class.
that contains a static instance of the class.
* cp-valprint.c (dont_print_vb_obstack): Renamed from
dont_print_obstack, made static.
(dont_print_statmem_obstack): New obstack, controls printing
of static member classes.
(_initialize_cp_valprint): Initialize it.
(cp_print_static_field): New function, handles printing of
static members.
(cp_print_value_fields): New parameter dont_print_statmem to
handle recursive printing of static member classes, use
cp_print_static_field to handle printing of static members.
* c-valprint.c (cp_print_value_fields): Update prototype and
call to include additional dont_print_statmem parameter.
* c-valprint.c, f-valprint.c (dont_print_obstack): Remove unused
extern declaration.
* alpha-tdep.c, findvar.c, infptrace.c: Include <string.h>.
* config/alpha/tm-alpha.h (FRAME_FIND_SAVED_REGS): Call
alpha_find_saved_regs if fi->saved_regs is still NULL.
* elfread.c (elf_symtab_read): Ensure that the filename field
of a minsym is nonempty. Ignore solib trampoline symbols from
the main symbol table, they might have a bogus value.
* procfs.c (set_proc_siginfo), config/alpha/alpha-osf2.mh:
Fix typos in comments.
pdr.framereg field of MIPS_EFI_SYMBOL_NAME symbol to -1. That way
we know whether the PDR ever got set.
* mips-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't
use the PDR, just examine prologues instead.
convenience variable $_ to be the line # of the match.
* symtab.c (decode_line_1): Allow convenience variables to be
used in line specs (for breakpoints and such).
Sun make (with VPATH) work...
* monitor.c monitor.h rom68k-rom.c: Serious cleanup to make IDP
(rom68k) target work right.
* array-rom.c op50-rom.c w89k-rom.c: Partial updates to new
monitor.c interface. More work needs to be done here.
* config/m68k/tm-monitor.h: Change DECR_PC_AFTER_BREAK to 0 to
match the IDP monitor. Also, set NUM_REGS to 18 cuz there's no
floating-point for this card.
we coerce array to pointer (in case arg2 is already array).
* valops.c (call_function_by_hand): Set using_gcc to 2 if using
gcc2. Needed for REG_STRUCT_HAS_ADDR to work on sparc.
Also check REG_STRUCT_HAS_ADDR for union, array and string types.
* valops.c (call_function_by_hand): Re-arrange code for pushing
paramaters on the stack so we can do better STACK_ALIGN.
* valops.c (call_function_by_hand): Call error if the number
of arguments is fewer than parameter types in function type.
sparc64 support to here.
(sparc64_extract_struct_value_address): Deleted.
(dump_ccreg): Add a prototype so long long arg -> int.
* sparc/tm-sp64.h (USE_STRUCT_CONVENTION): Define.
(EXTRACT_STRUCT_VALUE_ADDRESS): Delete.
callers changed. Use it to handle dynamic address relocation.
(hpread_build_psymtabs): Adjust texthigh as we read each function
debug symbol. Fix computation of texthigh.
(hpread_read_subrange_type): Work around macro bugs in HP's
compilers.
(hpread_process_one_debug_symbol): Correctly map source lines.
-DNO_PROTOTYPES.
* gdb.base/callfuncs.c: Control use of prototypes based on
NO_PROTOTYPES, not __STDC.
* gdb.base/callfuncs.exp (do_function_calls): xfail one of the
t_float_values2 tests if prototypes in use.
* gdb.base/callfuncs.c (t_float_values, t_float_values2,
t_double_values): When checking differences against DELTA, check
that difference is within the range (-DELTA,DELTA), not just
(-infinity,DELTA).
extract_unsigned_integer and friends, not SWAP_TARGET_AND_HOST.
* defs.h, findvar.c: Move SWAP_TARGET_AND_HOST back to findvar.c.
Rename it to SWAP_FLOATING to make it clear it is no longer for
integers.
create a 0-length array type, and set BOUND_CANNOT_BE_DETERMINED.
* valops.c (value_cast): If a cast like (TYPE[])VALUE (i.e. array
of unknown length) use sizeof(VALUE)/sizeof(TYPE) as the length.
* c-typeprint.c (c_type_print_varspec_suffix): If array length
is 0, print it, but not if upper_bound is BOUND_CANNOT_BE_DETERMINED.
enable/disable_breakpoint_hook with modify_breakpoint_hook.
* gdbtk.c: General cleanups, get rid of unused variables. Redo
handling of stdout/stderr to just return output as the result of
the tcl command that caused the output. Cleanup -Wall stuff.
* (breakpoint_notify): Now returns just action and breakpoint
number.
* (gdb_get_breakpoint_list): New routine. Does the obvious.
* (gdb_get_breakpoint_info): Mostly derived from the old
breakpoint_notify, but returns lots more info.
* (dsprintf_append_element): Helper routine, works like printf,
but appends a tcl element onto the specified DString. Good for
building up lists as return values.
* (gdbtk_enable/disable_breakpoint): Go away. Replaced with
gdbtk_modify_breakpoint.
* (*many routines*): Use new result protocol.
* (call_wrapper): Make sure that recursive calls don't trash results.
* gdbtk.tcl: New windows, autocmd, and breakpoints.
* (gdbtk_tcl_fputs): Don't use $current_output_win redirection
anymore. It's not needed (in fact, this routine may not be needed
anymore).
* (gdbtk_tcl_breakpoint): Change to reflect new breakpoint
notification protocol.
* (gdbtk_tcl_busy gdbtk_tcl_idle): Straighten out buttons, remove
catches.
* (interactive_cmd): Use this wrapper around button invocations
of many commands. This will catch errors and put the results into
the command window. It also updates all the other windows.
* Also, change reliefs of most things to sunken. This actually
looks better.
* (create_file_win): Fix margin binding to allow breakpoints to
work again.
* (create_asm_win): Use return value of gdb_disassemble instead
of implicit I/O to the command window.
* (create_command_window): Use new result protocol to get output
from commands.
simplify code, declare things, format to standards.
(inferior.h, value.h, command.h, remote-utils.h): Include.
(e7000_login): Rename to e7000_login_command.
(e7000_ftp): Rename to e7000_ftp_command.
(e7000_drain): Rename to e7000_drain_command.
arg, it is a value not a symbol.
gcc -Wall lint:
* eval.c: Move declaration of evaluate_subexp_with_coercion from here..
* expression.h: ..to here.
* expression.h: Include value.h.
* ch-lang.c (evaluate_subexp_chill): Add default case in switch.
* c-lang.c (c_language_defn, cplus_language_defn, asm_langauge_defn),
f-lang.c (f_language_defn), language.c (unknown_language_defn,
auto_language_defn, local_language_defn), m2-lang.c (m2_language_defn):
Set evaluate_exp to evaluate_subexp_standard.
* ch-lang.c (evaluate_subexp_chill): New function. Chill-specific
support for MULTI_SUBSCRIPT.
(chill_language_defn): Set evaluate_exp to evaluate_subexp_chill.
* eval.c (enum noside): Move from here ....
* expression.h (enum noside): ... to here.
(evaluate_subexp_standard): New prototype.
* eval.c (evaluate_subexp): Renamed to evaluate_subexp_standard.
Removed lo-longer-needed test for chill_varying_type.
(evaluate_subexp): New. Calls exp->language_defn->evaluate_exp.
since that functionality has been re-written.
* coffread.c: Remove commented-out add_param_to_type support.
* mdebugread.c (parse_symbol): Likewise.
* stabsread.c (define_symbol): Likewise.
parameter type info, set that from parameter symbols.
* c-typeprint.c (c_type_print_varspec_suffix): For TYPE_CODE_FUNC,
print parameter types, if available.
* ch-typeprint.c (chill_type_print_base): Likewise.
* gdbtypes.h (struct type): Remove function type field.
(TYPE_FUNCTION_TYPE): Remove macro. We can't as simply re-use
function types now that we're also storing parameter types.
And the payoff is much less.
* gdbtypes.c (make_function_type): Don't use/set TYPE_FUNCTION_TYPE.
(recursive_dump_type): Don't print TYPE_FUNCTION_TYPE.
* dwarfread.c (read_subroutine_type): Don't set TYPE_FUNCTION_TYPE.
