PR 26850
* dwarf2dbg.c (dwarf2_gen_line_info_1): Do not record lines in
sections that are not executable or not loadable.
(out_debug_line): Move warning message into dwarf2_gen_line_info_1.
* testsuite/gas/elf/dwarf2-20.s: New test.
* testsuite/gas/elf/dwarf2-20.d: New test driver.
* testsuite/gas/elf/elf.exp: Run the new test.
* testsuite/gas/elf/warn-2.s: Use the .nop directive.
include * opcode/pru.h: Add LMBD (left-most bit detect) opcode index
opcodes * pru-opc.c: Add opcode description for LMBD (left-most bit detect)
gas * testsuite/gas/pru/misc.s: Add tests for lmbd (left-most bit detect)
* testsuite/gas/pru/misc.d: Add tests for lmbd (left-most bit
This patch:
+ Adds new ACCDATA_EL1 (Accelerator Data) system register, see [0].
+ Adds LS64 instruction tests.
+ Update LS64 feature test with new register.
+ Fix comment for AARCH64_OPND_Rt_LS64.
[0] https://developer.arm.com/docs/ddi0595/i/aarch64-system-registers/accdata_el1
Note: as this is register only extension we do not want to hide these
registers behind -march flag going forward (they should be enabled by
default).
Atomic 64-byte load/store instructions limit Rt register number to
values matching below condition (register <Xt> number must be even
and <= 22):
if Rt<4:3> == '11' || Rt<0> == '1' then UNDEFINED;
This patch adds check if Rt fulfills above requirement.
For more details regarding atomic 64-byte load/store instruction for
Armv8.7 please refer to Arm A64 Instruction set documentation for
Armv8-A architecture profile, see document page 157 for load
instruction, and pages 414-418 for store instructions of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
Originally, if the -mabi option isn't set, then assembler will set the
abi according to the architecture string in the riscv_after_parse_args.
But we should also check and reset the abi later since the architecture
string may be reset by the elf attributes. Therefore, set the abi to
the elf_flags in the riscv_after_parse_args seems too early. Besides,
we have to set the abi_xlen before assembling any instruction, so it
should be safe to call riscv_set_abi_by_arch at the place that we set
start_assemble to TRUE. However, one minor case is that we won't call
the md_assemble when we are assembling an file without any instruction.
It seems that we still need to set the abi in riscv_elf_final_processing,
to make sure that abi can be updated according to the elf arch attributes.
For the rv32i and most elf toolchains, this patch can fix the mis-matched
ABI errors for Run pr26391-5 and Run pr26391-6 testcases. Besides, it
also correct the elf header flags of the output objects. Consider the
new testcases, mabi-fail-02 and mabi-noabi-attr-[01|02|03], they are
failed before applying this patch.
But I still get the mis-matched ABI errors for the following toolchains
when runnung the riscv-gnu-toolchain regressions,
newlib-rv32imafc-ilp32f-[medlow|medany]
linux-rv32imac-ilp32-[medlow|medany]
linux-rv32imafdc-ilp32-[medlow|medany}
linux-rv64imac-lp64-[medlow|medany]
linux-rv64imafdc-lp64-[medlow|medany}
For the newlib-rv32imafc-ilp32f, although we try to choose the abi
according to the elf attributes, we will use FLOAT_ABI_SOFT rather
than the FLOAT_ABI_SINGLE for the assmebly file wihtout setting the
-mabi, but compiler will set the abi to FLOAT_ABI_SINGLE for the
C files.
As for the linux toolchains, we also get fails for Run pr26391-5 and
Run pr26391-6 testcases. Since the linux toolchain won't generate elf
attributes to correct the ISA, and the --with-arch configure option
isn't set, assembler will try to set the default arch to rv[32|64]g,
which means the FLOAT_ABI_DOUBLE will be choosed, and may be conflict
with the abi set by the toolchain.
Therefore, I would suggest that it's is more safe to set the --with-arch
when building binutils, but it may break some testcases. For example,
ld-scripts/fill and ld-scripts/empty-address-2 may be broken when c-ext
is set. We might insert R_RISCV_ALIGN to make sure the 4-byte alignment,
but the dump result will be a bit different from what the testcase expected.
However, this patch only fix the problem - the abi, elf_flags and the
instruction, which is generated according to the abi_xlen, are all fixed
once the elf attributes are set for most elf toolchains. Other mis-matched
ABI problems should be fixed when we always build the binutils with the
--with-arch= configure option.
gas/
* config/tc-riscv.c (explicit_mabi): New boolean to indicate if
the -mabi= option is explictly set.
(md_parse_option): Set explicit_mabi to TRUE if -mabi is set.
(riscv_set_abi_by_arch): New function. If the -mabi option isn't
set, then we set the abi according to the architecture string.
Otherwise, check if there are conflicts between architecture
and abi setting.
(riscv_after_parse_args): Move the abi setting to md_assemble nad
riscv_elf_final_processing.
(md_assemble): Call the riscv_set_abi_by_arch when we set the
start_assemble to TRUE.
(riscv_elf_final_processing): Likewise, in case the file without
any instruction.
* testsuite/gas/riscv/mabi-attr-01.s: New testcase.
* testsuite/gas/riscv/mabi-attr-02.s: Likewise.
* testsuite/gas/riscv/mabi-attr-03.s: Likewise.
* testsuite/gas/riscv/mabi-fail-01.d: Likewise.
* testsuite/gas/riscv/mabi-fail-01.l: Likewise.
* testsuite/gas/riscv/mabi-fail-02.d: Likewise.
* testsuite/gas/riscv/mabi-fail-02.l: Likewise.
* testsuite/gas/riscv/mabi-noabi-attr-01a.d: Likewise.
* testsuite/gas/riscv/mabi-noabi-attr-01b.d: Likewise.
* testsuite/gas/riscv/mabi-noabi-attr-02a.d: Likewise.
* testsuite/gas/riscv/mabi-noabi-attr-02b.d: Likewise.
* testsuite/gas/riscv/mabi-noabi-attr-03a.d: Likewise.
* testsuite/gas/riscv/mabi-noabi-attr-03b.d: Likewise.
* testsuite/gas/riscv/mabi-noabi-march-01.d: Likewise.
* testsuite/gas/riscv/mabi-noabi-march-02.d: Likewise.
* testsuite/gas/riscv/mabi-noabi-march-03.d: Likewise.
This patch:
+ updates RAS feature system registers with new RAS 1.1 regs.
+ extends RAS/RAS 1.1 support for all architecture levels of Armv8-A.
Please note that early Armv8-A architectures do not officially support RAS
extension.
Rationale of the patch:
To ease development so that user-friendly RAS system registers operands can be
used. Certain use cases require developers to enable only more generic
architecture (e.g. -march=armv8-a) during system development. Users must use
RAS extension registers bearing in mind that system they use must support it.
The RAS (Reliability, Availability, Serviceability) extension is a
system-level extension that defines a number of system registers.
RAS 1.1 (FEAT_RASv1p1) introduces five new system registers:
ERXPFGCTL_EL1, ERXPFGCDN_EL1, ERXMISC2_EL1, ERXMISC3_EL1 and
ERXPFGF_EL1.
For details see [0].
[0] https://developer.arm.com/docs/ddi0595/i/
Armv8.7 architecture introduces the "accelerator extension", aka
load/store of 64 bytes. New atomic load/store instructions are: LD64B,
ST64B, ST64BV and ST64BV0.
This patch adds:
+ New feature +ls64 to -march command line.
+ New atomic load/store instructions associated with above feature.
For more details regarding atomic 64-byte load/store instruction for
Armv8.7 please refer to Arm A64 Instruction set documentation for
Armv8-A architecture profile, see document page 157 for load
instruction, and pages 414-418 for store instructions of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
Symbol value is in bytes while fragS::fr_address is in octets. Fixes GAS
symver12 and symver13 tests on ELF targets with with OCTETS_PER_BYTE>1.
* config/obj-elf (elf_frob_symbol): Fix symbol value calculation
for versioned symbol aliases.
Signed-off-by: Christian Eggers <ceggers@gmx.de>
Since a file slot is auto-assigned for the #APP marker appeared before
the first .file <NUMBER> directive has been seen, clear all auto-assigned
file slots when seeing the first .file <NUMBER> directive.
PR gas/26778
* * dwarf2dbg.c (num_of_auto_assigned): New.
(allocate_filenum): Increment num_of_auto_assigned.
(dwarf2_directive_filename): Clear the slots auto-assigned
before the first .file <NUMBER> directive was seen.
* testsuite/gas/i386/dwarf4-line-1.d: New file.
* testsuite/gas/i386/dwarf4-line-1.s: Likewise.
* testsuite/gas/i386/i386.exp: Run dwarf4-line-1.
gas/
* config/tc-csky.c (get_operand_value): Add handler for
OPRND_TYPE_IMM5b_VSH and OPRND_TYPE_VREG_WITH_INDEX.
* testsuite/gas/csky/csky_vdsp.d : Fix the disassembling
for vector register.
opcodes/
* csky-dis.c (csky_output_operand): Add handler for
OPRND_TYPE_IMM5b_VSH and OPRND_TYPE_VREG_WITH_INDEX.
* csky-opc.h (OPRND_TYPE_VREG_WITH_INDEX): New enum.
(OPRND_TYPE_IMM5b_VSH): New enum.
(csky_v2_opcodes): Fix and add some instructions for VDSPV1.
Change-Id: Ia5675d7b716fe5c331e6121ad8f83061ef6454bb
bfd * po/es.po: Fix printf format
binutils * windmc.c: Fix printf format
gas * config/tc-arc.c: Fix printf format
opcodes * po/es.po: Fix printf format
sim * arm/armos.c: Fix printf format
* ppc/emul_netbsd.c: Fix printf format
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
Always clear the slot 1 if it was assigned to the input file before the
first .file <NUMBER> directive has been seen. Always use as_where to
generate the correct debug infor for preprocessed assembly codes.
PR gas/25878
PR gas/26740
* dwarf2dbg.c (allocate_filename_to_slot): Don't reuse the slot 1
here.
(dwarf2_where): Restore as_where.
(dwarf2_directive_filename): Clear the slot 1 if it was assigned
to the input file.
* testsuite/gas/i386/dwarf5-line-2.d: New file.
* testsuite/gas/i386/dwarf5-line-2.s: Likewise.
* testsuite/gas/i386/dwarf5-line-3.d: Likewise.
* testsuite/gas/i386/dwarf5-line-3.s: Likewise.
* testsuite/gas/i386/i386.exp: Run dwarf5-line-2 and
dwarf5-line-3.
Some instructions can be emitted (dwarf2_emit_insn is called) before the
first .file <NUMBER> directive has been seen, which allocates the input
file as the first file entry. Reuse the input file entry in the file
table.
PR gas/25878
PR gas/26740
* dwarf2dbg.c (file_entry): Remove auto_assigned.
(assign_file_to_slot): Remove the auto_assign argument.
(allocate_filenum): Updated.
(allocate_filename_to_slot): Reuse the input file entry in the
file table.
(dwarf2_where): Replace as_where with as_where_physical.
* testsuite/gas/i386/dwarf5-line-1.d: New file.
* testsuite/gas/i386/dwarf5-line-1.s: Likewise.
* testsuite/gas/i386/i386.exp: Run dwarf5-line-1.
Rename VexOpcode to OpcodePrefix so that OpcodePrefix can be used for
regular encoding prefix.
gas/
* config/tc-i386.c (build_vex_prefix): Replace vexopcode with
opcodeprefix.
(build_evex_prefix): Likewise.
(is_any_vex_encoding): Don't check vexopcode.
(output_insn): Handle opcodeprefix.
opcodes/
* i386-gen.c (opcode_modifiers): Replace VexOpcode with
OpcodePrefix.
* i386-opc.h (VexOpcode): Renamed to ...
(OpcodePrefix): This.
(PREFIX_NONE): New.
(PREFIX_0X66): Likewise.
(PREFIX_0XF2): Likewise.
(PREFIX_0XF3): Likewise.
* i386-opc.tbl (Prefix_0X66): New.
(Prefix_0XF2): Likewise.
(Prefix_0XF3): Likewise.
Replace VexOpcode= with OpcodePrefix=. Use Prefix_0X66 on xorpd.
Use Prefix_0XF3 on cvtdq2pd. Use Prefix_0XF2 on cvtpd2dq.
* i386-tbl.h: Regenerated.
This patch fixes a bogus use of type punning in parse_barrier() which
was causing an assembly failure on big endian LP64 hosts when attempting
to assemble "isb sy" for AArch64.
The type of the entries in aarch64_barrier_opt_hsh is
aarch64_name_value_pair. We were incorrectly casting this to the
locally-defined asm_barrier_opt which has a wider type (on LP64) for the
second member. This happened to work on little-endian hosts but fails on
LP64 big endian.
The fix is to use the correct type in parse_barrier(). This makes the
locally-defined asm_barrier_opt redundant, so remove it.
gas/ChangeLog:
* config/tc-aarch64.c (asm_barrier_opt): Delete.
(parse_barrier): Fix bogus type punning.
* testsuite/gas/aarch64/system.d: Update disassembly.
* testsuite/gas/aarch64/system.s: Add isb sy test.
PR 26692
* config/tc-z80.c (md_begin): Ensure that xpressions are empty
before using them.
(unify_indexed): Likewise.
(z80_start_line_hook): Improve hash sign handling when SDCC
compatibility mode enabled.
(md_parse_exp_not_indexed): Improve indirect addressing
detection.
(md_pseudo_table): Accept hd64 as an alias of z810.
In 64bit, assembler generates a warning for "sysret":
$ echo sysret | as --64 -o x.o -
{standard input}: Assembler messages:
{standard input}:1: Warning: no instruction mnemonic suffix given and no register operands; using default for `sysret'
Always display suffix for %LQ in 64bit to display "sysretl".
gas/
PR binutils/26704
* testsuite/gas/i386/noreg64-data16.d: Expect sysretl instead of
sysret.
* testsuite/gas/i386/noreg64.d: Likewise.
* testsuite/gas/i386/x86-64-intel64.d: Likewise.
* testsuite/gas/i386/x86-64-opcode.d: Likewise.
opcodes/
PR binutils/26704
* i386-dis.c (putop): Always display suffix for %LQ in 64bit.
The MODRM byte can be checked to display the instruction name only if the
MODRM byte needed. Clear modrm if the MODRM byte isn't needed so that
modrm field checks in putop like, modrm.mod == N with N != 0, can be done
without checking need_modrm.
gas/
PR binutils/26705
* testsuite/gas/i386/x86-64-suffix.s: Add "mov %rsp,%rbp" before
sysretq.
* testsuite/gas/i386/x86-64-suffix-intel.d: Updated.
* testsuite/gas/i386/x86-64-suffix.d: Likewise.
opcodes/
PR binutils/26705
* i386-dis.c (print_insn): Clear modrm if not needed.
(putop): Check need_modrm for modrm.mod != 3. Don't check
need_modrm for modrm.mod == 3.
PR 26253
gas * config/obj-elf.c (obj_elf_section): Accept a numeric value for
the "o" section flag. Interpret it as a section index. Allow an
index of zero.
* doc/as.texi: Document the new behaviour.
* NEWS: Mention the new feature. Tidy entries.
* testsuite/gas/elf/sh-link-zero.s: New test.
* testsuite/gas/elf/sh-link-zero.d: New test driver.
* testsuite/gas/elf/elf.exp: Run the new test.
* testsuite/gas/elf/section21.l: Updated expected assembler
output.
bfd * elf.c (_bfd_elf_setup_sections): Do not complain about an
sh_link value of zero when the SLF_LINK_ORDER flag is set.
(assign_section_numbers): Likewise.
When the address size prefix applies to both the memory and the register
operand, we need to extract the address size prefix from the register
operand if the memory operand has no real registers, like symbol, DISP
or symbol(%rip).
NB: GCC always generates symbol(%rip) for RIP-relative addressing for
both x32 and x86-64.
Move the .code16 tests in movdir.s to movdir-16bit to show the correct
output from objdump.
PR gas/26685
* config/tc-i386.c (process_suffix): Also check the register
operand for the address size prefix if the memory operand has
no real registers.
* testsuite/gas/i386/enqcmd-16bit.d: New file.
* testsuite/gas/i386/enqcmd-16bit.s: Likewise.
* testsuite/gas/i386/movdir-16bit.d: Likewise.
* testsuite/gas/i386/movdir-16bit.s: Likewise.
* testsuite/gas/i386/enqcmd.s: Add tests with symbol and DISP.
* testsuite/gas/i386/x86-64-enqcmd.s: Likewise.
* testsuite/gas/i386/x86-64-movdir.s: Likewise.
* testsuite/gas/i386/movdir.s: Add tests with symbol and DISP.
Remove the .code16 test.
* testsuite/gas/i386/i386.exp: Run movdir-16bit and enqcmd-16bit.
* testsuite/gas/i386/x86-64-enqcmd-intel.d: Updated.
* testsuite/gas/i386/x86-64-enqcmd.d: Likewise.
* testsuite/gas/i386/x86-64-movdir-intel.d: Likewise.
* testsuite/gas/i386/x86-64-movdir.d: Likewise.
* testsuite/gas/i386/enqcmd-intel.d: Likewise.
* testsuite/gas/i386/enqcmd.d: Likewise.
* testsuite/gas/i386/movdir-intel.d: Likewise.
* testsuite/gas/i386/movdir.d: Likewise.
* testsuite/gas/i386/x86-64-enqcmd-intel.d: Likewise.
* testsuite/gas/i386/x86-64-enqcmd.d: Likewise.
* testsuite/gas/i386/x86-64-movdir-intel.d: Likewise.
* testsuite/gas/i386/x86-64-movdir.d: Likewise.
* config/obj-elf (elf_pseudo_table): Add attach_to_group.
(obj_elf_attach_to_group): New function.
* doc/as.texi: Document the new directive.
* NEWS: Mention the new feature.
* testsuite/gas/elf/attach-1.s: New test.
* testsuite/gas/elf/attach-1.d: New test driver.
* testsuite/gas/elf/attach-2.s: New test.
* testsuite/gas/elf/attach-2.d: New test driver.
* testsuite/gas/elf/attach-err.s: New test.
* testsuite/gas/elf/attach-err.d: New test driver.
* testsuite/gas/elf/attach-err.err: New test error output.
* testsuite/gas/elf/elf.exp: Run the new tests.
If the address prefix changes the register operand, we need to check the
register operand when the memory operand is RIP-relative.
PR gas/26685
* config/tc-i386.c (process_suffix): Check the register operand
for the address size prefix if the memory operand is symbol(%rip).
* testsuite/gas/i386/x86-64-enqcmd.s: Add tests with RIP-relative
addressing.
* testsuite/gas/i386/x86-64-movdir.s: Likewise.
* testsuite/gas/i386/x86-64-enqcmd-intel.d: Updated.
* testsuite/gas/i386/x86-64-enqcmd.d: Likewise.
* testsuite/gas/i386/x86-64-movdir-intel.d: Likewise.
* testsuite/gas/i386/x86-64-movdir.d: Likewise.
This patch adds support for Arm's Neoverse N2 CPU to AArch64 binutils.
gas/ChangeLog:
* config/tc-aarch64.c (aarch64_cpus): Add neoverse-n2.
* doc/c-aarch64.texi: Document support for Neoverse N2.
