* config/m68k/tm-m68k.h (NUM_FREGS): m68k-linux patch.
Added NUM_FREGS macro.
* config/m68k/xm-linux.h: m68k-linux patch. New file.
* config/m68k/tm-linux.h: m68k-linux patch. New file.
* config/m68k/nm-linux.h: m68k-linux patch. New file.
* config/m68k/linux.mt: m68k-linux patch. New file.
* config/m68k/linux.mh: m68k-linux patch. New file.
* gdbserver/low-linux.c: m68k-linux patch. Added an ifdef
that checks the value of __GLIBC to decide whether or
not to include sys/reg.h.
* m68klinux-nat.c: m68k-linux patch. New file. Note
both m68k-tdep.c and m68klinux-nat.c contain definitions
for supply_gregset and supply_fpregset. The definitions
in m68k-tdep.c are valid is USE_PROC_FS is defined. Otherwise,
the definitions in m68klinux-nat.c will be used. This is a
bit of a hack. The supply_* routines do not belong in
*_tdep.c files. But, there are several lynx ports that currently
depend on these definitions.
* configure.tgt: m68k-linux patch. Added m68*-*-linux*
gdb_target.
* configure.host: m68k-linux patch. Added m68*-*-linux*
gdb_host.
* Makefile.in: m68k-linux patch. Added compile line for
m68klinux-nat.o
* sim/fr30/testutils.inc (set_s_user): Correct Mask.
(set_s_system): Correct Mask.
* sim/fr30/ld.cgs (ld): Move previously failing test back
into place.
* sim/fr30/ldm0.cgs: New testcase.
* sim/fr30/ldm1.cgs: New testcase.
* sim/fr30/stm0.cgs: New testcase.
* sim/fr30/stm1.cgs: New testcase.
AIX .vbyte unaligned data support.
(md_pseudo_table): Add 'vbyte' to list of valid pseudos.
(ppc_elf_validate_fix): Add eh_frame to list of ELF relocatable
sections.
<jimb@zwingli.cygnus.com> and David Taylor
<taylor@texas.cygnus.com> as part of a project to merge in changes
made by HP; HP did not create ChangeLog entries.
* config/mp-enable-tui: New file.
(TUI_CFLAGS): Search devo's include directory, as long as we're
totally ruining modularity.
(INCLUDE_SRCDIR): New var.
(GDB_TUI_SRCDIR): Fix syntax error.
* configure.in: Check the --enable-tui flag; if it's set, include
a makefile fragment that #defines TUI and adds the needed #include
directories.
(*-*-hpux*): New host; use sysdep-hpux.h.
* Makefile.in (.c.o): Check the variable set in the makefile
fragment above.
* display.c (term_goto): declare it.
(insert_some_chars): set it.
(delete_chars): set it.
* readline.c: add tui include files surrounded by TUI.
(rl_reset): new function, move some of rl_abort functionality to
here.
(rl_abort): call rl_reset.
(rl_getc): tui changes.
(init_terminal_io): tui changes.
* readline.h (tui_version, fputc_unfiltered, fputs_unfiltered,
tui_tputs): declare if TUI is defined.
* rltty.c (prepare_terminal_settings): additional comment.
* signals.c: add tui include files surrounded by TUI. move #if
and #endif to column 1 so HP's compiler will accept them. Remove
declaration of tuiDoAndReturnToTop since it's declared in tui.h.
(rl_handle_sigwinch): call tuiDoAndReturnToTop if TUI defined.
(rl_handle_sigwinch_on_clear): define if TUI defined.
(rl_set_signals): if TUI, avoid infinite recursion.
(rl_clear_signals): install rl_handle_sigwinch_on_clear.
* sysdep-hpux.h: New file.
Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
David Taylor <taylor@texas.cygnus.com>, and
Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
merge in changes by HP; HP did not create ChangeLog entries.
* dis-buf.c (generic_strcat_address): new function.
* hppa-dis.c: Changes to improve hppa disassembly.
Changed formatting in : reg_names, fp_reg_names,control_reg,
New variables : sign_extension_names, deposit_names, conversion_names
float_test_names, compare_cond_names_double, add_cond_names_double,
logical_cond_names_double, unit_cond_names_double,
branch_push_pop_names, saturation_names, shift_names, mix_names,
New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
Move some definitions to libhppa.h: GET_FIELD, GET_BIT
(fput_const): renamed as fput_hex_const
(print_insn_hppa):
- use the macros fputs_filtered and
fput_decimal_const whenever possible; calls to sign_extend require
2 params -- add a missing second param of 0.
- Some new code ifdefed for LOCAL_ONLY, all related to figuring out
architecture version number of current machine. HP folks are
trying to handle situation where the target program was compiled
for PA 1.x (32-bit), but is running on a PA 2.0 machine and
visa versa.
- added new cases : 'g', 'B', 'm'
- added cases specifically for PA 2.0
- changed the following cases : '"', 'n', 'N', 'p', 'Z',
- calls to fput_const become calls to fput_hex_const
Zannoni.
* hpux-core.c (hpux_core_core_file_p): this function now
understands HPUX 10.30 thread info. Yes, the thread stacks can be
found in the corefile! Also, in hpux_core_core_file_p, if we
encounter a section with an unknown type, don't punt. Instead,
just skip it. Also, count the number of sections of known type
that we encounter. If we encounter at least one good one, then
we'll declare that the file is a core file. If we encounter any
unknown ones but some known ones, then we'll issue a warning (but
still declare it to be a core file). Also, correctly decide when a
file is not a core.
(PROC_INFO_HAS_THREAD_ID): define if CORE_ANON_SHMEM defined.
(CORE_ANON_SHMEM): define if not defined.
(hpux_core_struct): add members lwpid and user_tid.
(core_kernel_thread_id, core_user_thread_id): new macros.
(make_bfd_asection): use bfd_alloc to allocate room for a copy of
the name before storing it in the bfd.
(hpux_core_core_file_p): handle threads.
* libhppa.h (GET_FIELD): protect against redefinition.
(HPPA_WIDE): define.
(GET_FIELD): define.
(GET_BIT): define.
(MASK): define.
(CATENATE): define.
(ELEVEN): define.
(sign_extend): redefine.
(assemble_6): define.
(assemble_12): rewrite.
(assemble_16): define.
(assemble_16a): define.
(assemble_17): rewrite.
(assemble_22): define.
* config/i386/xm-cygwin.h: Remove REQUEST_QUIT definition.
* config/powerpc/xm-cygwin.h: Ditto.
PR 17664.
With this define in place, you can't type "q" to get out of GDB's pager
under Cygwin.
the stack frame. Their offset from the previous stack frame is in
fdata.gpr_offset and fdata.fpr_offset, not fdata.offset.
(gdb.base/return.exp)
* config/rs6000/tm-rs6000.h: Doc fixes.
(objdump_sprintf): Merge both versions into one. Increase buffer
size as needed to avoid overflow.
(disassemble_bytes): Change buf from 1000 bytes to 50. Change
initialization and use of sfile to match changes to
objdump_sprintf.
* configure: Regenerate.
* sim-main.h: Protect against multiple inclusion.
Don't include cgen-scache.h,cgen-cpu.h,cgen-trace.h,cpuall.h.
Done by cgen-sim.h now.
* tconfig.in (SIM_HAVE_MODEL): Delete, moved to cgen-types.h.
* cpuall.h: Regenerate.
* cpu.h,decode.c,sem-switch.c,sem.c: Regenerate.
* mloop.in (extract16): Make static inline again.
Simplify with call to @cpu@_fill_argbuf,@cpu@_fill_argbuf_tp.
(extract32): Ditto.
Simplify with call to @cpu@_fill_argbuf,@cpu@_fill_argbuf_tp.
(execute): Test ARGBUF_PROFILE_P before profiling.
Update calls to TRACE_INSN_INIT,TRACE_INSN_FINI.
* cpux.h,decodex.c,modelx.c,semx-switch.c: Regenerate.
* mloopx.in: Rewrite.
