GCC's config/ChangeLog since the last time this merge was done
(in the binutils-gdb commit 0b4d000cc4) is included at the
end of this commit message.
It is worth noting that the binutils-gdb commit 301a9420d9
added the file config/debuginfod.m4 which is not present in GCC's
config/ directory. This file is preserved, unmodified, after this
commit.
In order to regenerate all of the configure files, I configured with
--enable-maintainer-mode, and built the 'all' target. I then did the
same thing on a source tree without this patch, and only committed
those files that changed when this patch was added.
GCC's config/ChangeLog entries:
2020-02-12 Sandra Loosemore <sandra@codesourcery.com>
PR libstdc++/79193
PR libstdc++/88999
* no-executables.m4: Use a non-empty program to test for linker
support.
2020-02-01 Andrew Burgess <andrew.burgess@embecosm.com>
* lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Update shell syntax.
2020-01-27 Andrew Burgess <andrew.burgess@embecosm.com>
* lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Add new
--with-libXXX-type=... option. Use this to guide the selection of
either a shared library or a static library.
2020-01-24 Maciej W. Rozycki <macro@wdc.com>
* toolexeclibdir.m4: New file.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
* futex.m4: Handle *-uclinux*.
* tls.m4 (GCC_CHECK_TLS): Likewise.
2019-09-06 Florian Weimer <fweimer@redhat.com>
* futex.m4 (GCC_LINUX_FUTEX): Include <unistd.h> for the syscall
function.
2019-07-08 Richard Sandiford <richard.sandiford@arm.com>
* bootstrap-Og.mk: New file.
2019-06-25 Kwok Cheung Yeung <kcy@codesourcery.com>
Andrew Stubbs <ams@codesourcery.com>
* gthr.m4 (GCC_AC_THREAD_HEADER): Add case for gcn.
2019-05-30 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* ax_count_cpus.m4: New file.
2019-05-02 Richard Biener <rguenther@suse.de>
PR bootstrap/85574
* bootstrap-lto.mk (extra-compare): Set to gcc/lto1$(exeext).
2019-04-16 Martin Liska <mliska@suse.cz>
* bootstrap-lto-lean.mk: Filter out -flto in STAGEtrain_CFLAGS.
2019-04-09 Martin Liska <mliska@suse.cz>
* bootstrap-lto-lean.mk: New file.
2019-03-02 Johannes Pfau <johannespfau@gmail.com>
* mh-mingw: Also set __USE_MINGW_ACCESS flag for C++ code.
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* math.m4, tls.m4: Use AC_LANG_SOURCE.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
config/ChangeLog:
* ax_count_cpus.m4: New file, backported from GCC.
* bootstrap-Og.mk: New file, backported from GCC.
* bootstrap-lto-lean.mk: New file, backported from GCC.
* bootstrap-lto.mk: Changes backported from GCC.
* futex.m4: Changes backported from GCC.
* gthr.m4: Changes backported from GCC.
* lib-link.m4: Changes backported from GCC.
* mh-mingw: Changes backported from GCC.
* no-executables.m4: Changes backported from GCC.
* tls.m4: Changes backported from GCC.
* toolexeclibdir.m4: New file, backported from GCC.
binutils/ChangeLog:
* configure: Regenerate.
gdb/ChangeLog:
* configure: Regenerate.
gdbserver/ChangeLog:
* configure: Regenerate.
gdbsupport/ChangeLog:
* configure: Regenerate.
intl/ChangeLog:
* configure: Regenerate.
libiberty/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog.bin-gdb:
* configure: Regenerate.
I noticed that do_start_initialization, in python.c, checks the result
of xmalloc. However, xmalloc cannot fail, so this check is useless.
This patch also changes the code to use XNEWVEC.
gdb/ChangeLog
2020-02-19 Tom Tromey <tromey@adacore.com>
* python/python.c (do_start_initialization): Use XNEWVEC. Remove
NULL check.
* config/tc-i386.c (output_insn): Mark cvtpi2ps and cvtpi2pd
with GNU_PROPERTY_X86_FEATURE_2_MMX.
* testsuite/gas/i386/i386.exp: Run property-3 and
x86-64-property-3.
* testsuite/gas/i386/property-3.d: New file.
* testsuite/gas/i386/property-3.s: Likewise.
* testsuite/gas/i386/x86-64-property-3.d: Likewise.
With gdb.cp/cpexprs.exp, we see:
...
KPASS: gdb.cp/cpexprs.exp: p CV::m(int) const (PRMS c++/14186)
KPASS: gdb.cp/cpexprs.exp: p CV::m(int) volatile (PRMS c++/14186)
KPASS: gdb.cp/cpexprs.exp: p CV::m(int) const volatile (PRMS c++/14186)
...
The tests have been KPASSing since Sept 4 2017, due to commit 3693fdb3c8
'Make "p S::method() const::static_var" work too'.
Fix this by removing the corresponding kfail.
gdb/testsuite/ChangeLog:
2020-02-19 Tom de Vries <tdevries@suse.de>
* gdb.cp/cpexprs.exp: Remove c++/14186 kfail.
Since plugin can be used only once in try_load_plugin, call dlclose
before return.
PR binutils/25355
* plugin.c (plugin_list_entry): Remove handle.
(try_load_plugin): Call dlclose before return.
When running gdb.base/solib-overlap.exp, I get:
...
Running src/gdb/testsuite/gdb.base/solib-overlap.exp ...
sh: prelink: command not found
=== gdb Summary ===
nr of untested testcases 1
...
The verbose output on stdout/stderr is due to using system to execute
prelink, which also means that the output is not captured in gdb.log and
gdb.sum.
Fix this by using exec instead of system.
Tested on x86_64-linux, with:
- no prelink installed, and
- a fake prelink installed, using "cp /usr/bin/echo ~/bin/prelink".
gdb/testsuite/ChangeLog:
2020-02-19 Tom de Vries <tdevries@suse.de>
* gdb.base/solib-overlap.exp: Use exec instead of system to execute
prelink.
Before commit d4295de4f3 "[gdb/testsuite] Handle missing gnatmake in
gnat_runtime_has_debug_info", calling the gdb_caching_proc
gnat_runtime_has_debug_info could generate a pass because of using
gdb_compile_ada.
This has been fixed in that commit by using a factored out variant
gdb_compile_ada_1, which does not call pass.
Additionally, fix cases like this in more generic way: by ignoring pass calls
during execution of a gdb_caching_proc.
Build and reg-tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-02-19 Tom de Vries <tdevries@suse.de>
* lib/cache.exp (ignore_pass, gdb_do_cache_wrap): New proc.
(gdb_do_cache): Use gdb_do_cache_wrap.
* gdb.base/gdb-caching-proc.exp (test_proc): Use gdb_do_cache_wrap.
Some minor tidies. Allocating memory for internal relocs and symbols
after reading external relocs is slightly better with fuzzed files.
You can at least do something about silly sizes that way.
* aoutx.h (slurp_reloc_table): Allocate reloc_cache after
reading external relocs.
* ecoff.c (ecoff_slurp_reloc_table): Likewise.
* archive.c (_bfd_write_archive_contents): Don't twiddle bfd_error
after bfd_bread.
* archive64.c (_bfd_archive_64_bit_slurp_armap): Remove unnecessary
bfd_release.
* elf32-m32c.c (m32c_offset_for_reloc): Make shndx_buf a bfd_byte*.
(m32c_elf_relax_section): Likewise.
* elf32-rl78.c (rl78_offset_for_reloc): Likewise.
(rl78_elf_relax_section): Likewise.
* elf32-rx.c (rx_offset_for_reloc): Likewise.
(elf32_rx_relax_section): Likewise.
* mach-o.c (bfd_mach_o_alloc_and_read): Move earlier with better
parameter types and use..
(bfd_mach_o_read_dylinker, bfd_mach_o_read_dylib),
(bfd_mach_o_read_fvmlib, bfd_mach_o_read_str): ..in these functions.
* peicode.h (pe_bfd_object_p): Don't zero the part of opthdr
being read from file, just the extra.
* som.c (som_slurp_symbol_table): Allocate internal symbol buffer
after reading external syms. Free on failure.
The bfd_alloc2 series of functions were invented to handle cases where
nmemb * size can overflow. This patch changes some places where the
calculation can't overflow.
* elf.c (bfd_section_from_shdr): Use bfd_zalloc rather than
bfd_zalloc2.
(assign_section_numbers): Likewise.
(elf_map_symbols): Likewise, and bfd_alloc rather than bfd_alloc2.
(_bfd_elf_map_sections_to_segments): Use bfd_malloc rather than
bfd_malloc2, size_t amt, and unsigned tls_count.
(rewrite_elf_program_header): Use bfd_malloc and size_t amt.
* elflink.c (elf_create_symbuf): Use bfd_malloc.
(elf_output_implib): Use bfd_alloc.
We have calls to bfd_get_size when swapping in ELF section headers.
Since object files can have a large number of sections, it's worth
caching the file size rather than making lots of stat system calls.
* bfd.c (struct bfd): Move format and direction to other
bitfields. Add "size".
* bfdio.c (bfd_get_size): Cache size when not writing file.
* opncls.c (bfd_get_debug_link_info_1): Allow for bfd_get_size
returning zero, ie. unknown.
(bfd_get_alt_debug_link_info): Likewise.
* bfd-in2.h: Regenerate.
This fixes a number of places that call a memory allocation function
without checking for a NULL return before using.
* mach-o.c (bfd_mach_o_flatten_sections): Return a bfd_boolean,
FALSE if memory alloc fails. Adjust calls.
* som.c (som_prep_for_fixups): Likewise.
* vms-alpha.c (alpha_vms_add_fixup_lp, alpha_vms_add_fixup_ca),
(alpha_vms_add_fixup_qr, alpha_vms_add_fixup_lr),
(alpha_vms_add_lw_reloc, alpha_vms_add_qw_reloc): Likewise.
* som.c (som_build_and_write_symbol_table): Return via error_return
on seek failure.
* vms-alpha.c (VEC_APPEND): Adjust for vector_grow1 changes.
(VEC_APPEND_EL): Delete.
(vector_grow1): Return pointer to element. Catch overflow.
Return NULL on memory allocation failure.
(alpha_vms_add_fixup_lp): Replace VEC_APPEND_EL with VEC_APPEND.
(alpha_vms_add_fixup_ca): Likewise.
(alpha_vms_link_add_object_symbols): Check VEC_APPEND result
before using.
* elf.c (bfd_section_from_shdr): Check bfd_zalloc2 result.
We can't use c99 without enabling c99 support for older compilers
that don't enable c99 by default. So if you want to use c99 contructs
in binutils you'll need to first arrange for -std=c99 to be passed to
older compilers.
* elfxx-riscv.c (riscv_multi_letter_ext_valid_p): Don't use C99.
Implement RISC-V/Linux support for both RV64 and RV32 systems, including
XML target description handling based on features determined, GPR and
FPR regset support including dynamic sizing of the latter, and software
breakpoint handling. Define two NT_FPREGSET regsets of a different size
matching the FPR sizes supported for generic `gdbserver' code to pick
from according to what the OS supplies.
Also handle a glibc bug where ELF_NFPREG is defined in terms of NFPREG,
however NFPREG is nowhere defined.
2020-02-19 Maciej W. Rozycki <macro@wdc.com>
Andrew Burgess <andrew.burgess@embecosm.com>
gdb/
* NEWS: Mention RISC-V GNU/Linux GDBserver support.
gdbserver/
* linux-riscv-low.cc: New file.
* Makefile.in (SFILES): Add linux-riscv-low.cc, arch/riscv.c,
and nat/riscv-linux-tdesc.c.
* configure.srv <riscv*-*-linux*> (srv_tgtobj)
(srv_linux_regsets, srv_linux_usrregs, srv_linux_thread_db):
Define.
In preparation for adding the RISC-V gdbserver, this commit
restructures the API for looking up target descriptions.
The current API is riscv_create_target_description, which creates a
target description from a riscv_gdbarch_features, but also caches the
created target descriptions so that for a given features object we
always get back the same target description object. This is important
for GDB due to the way gdbarch objects are reused.
As the same target description is always returned to GDB, and can be
returned multiple times, it is returned as a const, however, the
current cache actually stores a non-const target description. This is
improved in this patch so that the cache holds a const target
description.
For gdbsever, this caching of the target descriptions is not needed,
the gdbserver looks up one target description to describe the target
it is actually running on and that is it. Further the gdbserver
actually needs to modify the target description that is looked up, so
for the gdbsever, returning a const target description is not
acceptable.
This commit aims to address this by creating two parallel target
description APIs, on is the old riscv_create_target_description,
however, this no longer performs any caching, and just creates a new
target description, and returns it as non-const.
The second API is riscv_lookup_target_description, this one performs
the caching, and calls riscv_create_target_description to create a
target description when needed.
In order to make sure the correct API is used in the correct place I
have guarded the code using the GDBSERVER define. For GDB the
riscv_create_target_description is static, and not generally usable
throughout GDB, only the lookup API is global. In gdbserver, the
lookup functions, and the cache are not defined or created at all,
only the riscv_create_target_description API is available.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* arch/riscv.c (struct riscv_gdbarch_features_hasher): Only define
if GDBSERVER is not defined.
(riscv_tdesc_cache): Likewise, also store const target_desc.
(STATIC_IN_GDB): Define.
(riscv_create_target_description): Update declaration with
STATIC_IN_GDB.
(riscv_lookup_target_description): New function, only define if
GDBSERVER is not defined.
* arch/riscv.h (riscv_create_target_description): Declare only
when GDBSERVER is defined.
(riscv_lookup_target_description): New declaration when GDBSERVER
is not defined.
* nat/riscv-linux-tdesc.c (riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this, and return
riscv_gdbarch_features instead of target_desc.
* nat/riscv-linux-tdesc.h: Include 'arch/riscv.h'.
(riscv_linux_read_description): Rename to...
(riscv_linux_read_features): ...this.
* riscv-linux-nat.c (riscv_linux_nat_target::read_description):
Update to use riscv_gdbarch_features and
riscv_lookup_target_description.
* riscv-tdep.c (riscv_find_default_target_description): Use
riscv_lookup_target_description instead of
riscv_create_target_description.
When running gdb.base/dtrace-probe.exp, I get this on stdout/stderr:
...
Running src/gdb/testsuite/gdb.base/dtrace-probe.exp ...
gdb compile failed, ld: error in \
build/gdb/testsuite/outputs/gdb.base/dtrace-probe/dtrace-probe.o\
(.eh_frame); no .eh_frame_hdr table will be created
ld: crt1.o: in function `_start':
start.S:110: undefined reference to `main'
ld: build/gdb/testsuite/outputs/gdb.base/dtrace-probe/dtrace-probe-p.o:\
(.SUNW_dof+0x88): undefined reference to `main'
ld: build/gdb/testsuite/outputs/gdb.base/dtrace-probe/dtrace-probe-p.o:\
(.SUNW_dof+0xb8): undefined reference to `main'
collect2: error: ld returned 1 exit status
=== gdb Summary ===
nr of untested testcases 1
...
There is no reason to be this verbose about the failure to compile.
Fix this by using quiet as additional option to gdb_compile in
dtrace_build_usdt_test_program. Note that the error message still occurs in
gdb.log.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-02-19 Tom de Vries <tdevries@suse.de>
* lib/dtrace.exp (dtrace_build_usdt_test_program): Use quiet as
gdb_compile option.
If a flag enum has value 0 and the enumeration type does not have an
enumerator with value 0, we currently print:
$1 = (unknown: 0x0)
I don't like the display of "unknown" here, since for flags, 0 is a
an expected value. It just means that no flags are set. This patch
makes it so that we print it as a simple 0 in this situation:
$1 = 0
If there is an enumerator with value 0, it is still printed using that
enumerator, for example (from the test):
$1 = FE_NONE
gdb/ChangeLog:
* valprint.c (generic_val_print_enum_1): When printing a flag
enum with value 0 and there is no enumerator with value 0, print
just "0" instead of "(unknown: 0x0)".
gdb/testsuite/ChangeLog:
* gdb.base/printcmds.exp (test_print_enums): Update expected
output.
When we print the "unknown" part of a flag enum, it is printed in
decimal. I think it would be more useful if it was printed in hex, as
it helps to determine which bits are set more than a decimal value.
gdb/ChangeLog:
* valprint.c (generic_val_print_enum_1): Print unknown part of
flag enum in hex.
gdb/testsuite/ChangeLog:
* gdb.base/printcmds.exp (test_print_enums): Expect hex values
for "unknown".
I have come across some uses cases where it would be desirable to treat
an enum that has duplicate values as a "flag enum". For example, this
one here [1]:
enum membarrier_cmd {
MEMBARRIER_CMD_QUERY = 0,
MEMBARRIER_CMD_GLOBAL = (1 << 0),
MEMBARRIER_CMD_GLOBAL_EXPEDITED = (1 << 1),
MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED = (1 << 2),
MEMBARRIER_CMD_PRIVATE_EXPEDITED = (1 << 3),
MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED = (1 << 4),
MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE = (1 << 5),
MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_SYNC_CORE = (1 << 6),
/* Alias for header backward compatibility. */
MEMBARRIER_CMD_SHARED = MEMBARRIER_CMD_GLOBAL,
};
The last enumerator is kept for backwards compatibility. Without this
patch, this enumeration wouldn't be considered a flag enum, because two
enumerators collide. With this patch, it would be considered a flag
enum, and the value 3 would be printed as:
MEMBARRIER_CMD_GLOBAL | MEMBARRIER_CMD_GLOBAL_EXPEDITED
Although if people prefer, we could display both MEMBARRIER_CMD_GLOBAL
and MEMBARRIER_CMD_SHARED in the result. It wouldn't be wrong, and
could perhaps be useful in case a bit may have multiple meanings
(depending on some other bit value).
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/uapi/linux/membarrier.h?id=0bf999f9c5e74c7ecf9dafb527146601e5c848b9#n125
gdb/ChangeLog:
* dwarf2/read.c (update_enumeration_type_from_children): Allow
flag enums to contain duplicate enumerators.
* valprint.c (generic_val_print_enum_1): Update comment.
gdb/testsuite/ChangeLog:
* gdb.base/printcmds.c (enum flag_enum): Add FE_TWO_LEGACY
enumerator.
GDB has this feature where if an enum looks like it is meant to
represent binary flags, it will present the values of that type as a
bitwise OR of the flags that are set in the value.
The original motivation for this patch is to fix this behavior:
enum hello { AAA = 0x1, BBB = 0xf0 };
(gdb) p (enum hello) 0x11
$1 = (AAA | BBB)
This is wrong because the bits set in BBB (0xf0) are not all set in the
value 0x11, but GDB presents it as if they all were.
I think that enumerations with enumerators that have more than one bit
set should simply not qualify as "flag enum", as far as this
heuristic is concerned. I'm not sure what it means to have flags of
more than one bit. So this is what this patch implements.
I have added an assert in generic_val_print_enum_1 to make sure the flag
enum types respect that, in case they are used by other debug info
readers, in the future.
I've enhanced the gdb.base/printcmds.exp test to cover this case. I've
also added tests for printing flag enums with value 0, both when the
enumeration has and doesn't have an enumerator for value 0.
gdb/ChangeLog:
* dwarf2/read.c: Include "count-one-bits.h".
(update_enumeration_type_from_children): If an enumerator has
multiple bits set, don't treat the enumeration as a "flag enum".
* valprint.c (generic_val_print_enum_1): Assert that enumerators
of flag enums have 0 or 1 bit set.
gdb/testsuite/ChangeLog:
* gdb.base/printcmds.c (enum flag_enum): Prefix enumerators with
FE_, add FE_NONE.
(three): Update.
(enum flag_enum_without_zero): New enum.
(flag_enum_without_zero): New variable.
(enum not_flag_enum): New enum.
(three_not_flag): New variable.
* gdb.base/printcmds.exp (test_artificial_arrays): Update.
(test_print_enums): Add more tests for printing flag enums.
After de-installing gnatmake, I get on stdout/stderr:
...
Running src/gdb/testsuite/gdb.base/gdb-caching-proc.exp ...
FAIL: gdb-caching-proc.exp: failed to compile gnat-debug-info test binary
...
FAIL: gdb-caching-proc.exp: failed to compile gnat-debug-info test binary
...
In gdb.sum, we see these FAILs (each paired with an UNSUPPORTED as well)
followed by:
...
PASS: gdb-caching-proc.exp: gnat_runtime_has_debug_info consistency
...
Likewise, after re-installing gnatmake, I get a PASS for each of the
UNSUPPORTEDs, and the FAILs disappear.
The FAIL comes from gnat_runtime_has_debug_info, the PASS/UNSUPPORTED comes
from gdb_compile_ada.
Fix this by removing the corresponding fail call in
gnat_runtime_has_debug_info, as well as using a new variant gdb_compile_ada_1
that doesn't call pass/unsupported.
Tested on x86_64-linux, with gnatmake installed and de-installed.
gdb/testsuite/ChangeLog:
2020-02-18 Tom de Vries <tdevries@suse.de>
* lib/ada.exp (gdb_compile_ada_1): Factor out of ...
(gdb_compile_ada): ... here.
(gnat_runtime_has_debug_info): Remove fail call for gdb_compile_ada
failure. Use gdb_compile_ada_1 instead of gdb_compile_ada.
An earlier patch changed gdbserver to use the already-built top-level
gnulib and gdbsupport. However, if one did a build that did not
include gdb, then gdbserver would fail to build.
The problem is that configure.ac only adds gnulib and gdbsupport to
the build when gdb is being built. This patch fixes the problem by
arranging for this to happen when gdbserver is built.
ChangeLog
2020-02-17 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac (configdirs): Add gnulib and gdbsupport when building
gdbserver.
AMD ABM has 2 instructions: popcnt and lzcnt. ABM CPUID feature bit has
been reused for lzcnt and a POPCNT CPUID feature bit is added for popcnt
which used to be the part of SSE4.2. This patch removes CpuABM and adds
CpuPOPCNT. It changes ABM to enable both lzcnt and popcnt, changes SSE4.2
to also enable popcnt.
gas/
* config/tc-i386.c (cpu_arch): Add .popcnt.
* doc/c-i386.texi: Remove abm and .abm. Add popcnt and .popcnt.
Add a tab before @samp{.sse4a}.
opcodes/
* i386-gen.c (cpu_flag_init): Replace CpuABM with
CpuLZCNT|CpuPOPCNT. Add CpuPOPCNT to CPU_SSE4_2_FLAGS. Add
CPU_POPCNT_FLAGS.
(cpu_flags): Remove CpuABM. Add CpuPOPCNT.
* i386-opc.h (CpuABM): Removed.
(CpuPOPCNT): New.
(i386_cpu_flags): Remove cpuabm. Add cpupopcnt.
* i386-opc.tbl: Replace CpuABM|CpuSSE4_2 with CpuPOPCNT on
popcnt. Remove CpuABM from lzcnt.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
There don't really need to be separate Cpu64 and CpuNo64 templates for
these. One small issue with this is that slightly strange code
.intel_syntax noprefix
.code16
.arch i286
.arch .avx
vcvtsi2sd xmm0, xmm0, dword ptr [bx]
vcvtsi2sd xmm0, xmm0, qword ptr [bx]
vcvtsi2sd xmm0, xmm0, ebx
vcvtsi2sd xmm0, xmm0, rbx
now will match in behavior with the AVX512 counterparts in that not
only the 2nd vcvtsi2sd won't assemble, but also the first. The last
two, otoh, will continue to assemble fine (due to the lack of any
memory operand size specifier). As a result, another way to make
things behave more consistently would be to avoid the folding and
add IgnoreSize to the CpuNo64 AVX512 variants. A 3rd way to do so
would be to add Cpu386 to any such insn template.
While doing this also make the usual cosmetic adjustments for the
insns touched anyway. Additionally drop the redundant Cpu64 from
the SAE forms of VCVT{,U}SI2SD - they won't assemble outside of
64-bit mode due to there not being anything to match the Reg64
operand.
There's no need to have separate Cpu64 and CpuNo64 templates: There
already is special logic handling the attribute, and all that's needed
is rejecting 16-bit address registers in 64-bit mode. Suppress suffix
guessing and group all involved logic together, outside of suffix
processing (arguably it doesn't even belong in process_suffix()).
Also, since no AddrPrefixOpReg template permits any suffixes, move the
No_*Suf specifiers for them to a central place. Along with this drop
the no longer relevant NoRex64 from there.
Generally, the documentation doesn't allow for any explicit operands
to be specified with MONITOR/MWAIT. To permit the more legible
overriding of the address size via specifying operands, the option is
being retained even in Intel mode, but operand swapping is being
suppressed by this patch. This is both because it makes no sense here
(all of the operands are inputs) and because, as a result, old gcc
(prior to 4.8) actually expects it this way with -mintel-syntax (and
hence gets fixed by this change rather than, as claimed by a reply in
the bug report, broken).
Conversions which shrink element size and which have a memory source
can't be disambiguated between their 128- and 256-bit variants by
looking at the register operand. "operand size mismatch", however, is a
pretty misleading diagnostic. Generalize the logic introduced for
VFPCLASSP{S,D} such that, with suitable similar adjustments to the
respective templates, it'll cover these cases too.
For VCVTNEPS2BF16 also fold the two previously separate AVX512VL
templates to achieve the intended effect. This is then also accompanied
by a respective addition to the inval-avx512f testcase.
Since SSE3 is independent of SSE4a, don't disable SSE3 when disabling
SSE4a.
* i386-gen.c (cpu_flag_init): Remove CPU_ANY_SSE3_FLAGS from
CPU_ANY_SSE4A_FLAGS.
commit 7deea9aad8 changed nosse4 to include CpuSSE4a. But AMD SSE4a is
a superset of SSE3 and Intel SSE4 is a superset of SSSE3. Disable Intel
SSE4 shouldn't disable AMD SSE4a. This patch restores nosse4. It also
adds .sse4a and nosse4a.
gas/
* config/tc-i386.c (cpu_arch): Add .sse4a and nosse4a. Restore
nosse4.
* doc/c-i386.texi: Document sse4a and nosse4a.
opcodes/
* i386-gen.c (cpu_flag_init): Add CPU_ANY_SSE4A_FLAGS. Remove
CPU_ANY_SSE4_FLAGS.
To help with readability, add the type displaced_step_closure_up, an
alias for std::unique_ptr<displaced_step_closure>, and use it throughout
the code base.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_displaced_step_copy_insn): Use
displaced_step_closure_up.
* aarch64-tdep.h (aarch64_displaced_step_copy_insn): Likewise.
(struct displaced_step_closure_up):
* amd64-tdep.c (amd64_displaced_step_copy_insn): Likewise.
* amd64-tdep.h (amd64_displaced_step_copy_insn): Likewise.
* arm-linux-tdep.c (arm_linux_displaced_step_copy_insn):
Likewise.
* gdbarch.sh (displaced_step_copy_insn): Likewise.
* gdbarch.c, gdbarch.h: Re-generate.
* i386-linux-tdep.c (i386_linux_displaced_step_copy_insn): Use
displaced_step_closure_up.
* i386-tdep.c (i386_displaced_step_copy_insn): Likewise.
* i386-tdep.h (i386_displaced_step_copy_insn): Likewise.
* infrun.h (displaced_step_closure_up): New type alias.
(struct displaced_step_inferior_state) <step_closure>: Change
type to displaced_step_closure_up.
* rs6000-tdep.c (ppc_displaced_step_copy_insn): Use
displaced_step_closure_up.
* s390-tdep.c (s390_displaced_step_copy_insn): Likewise.
This changes gdbserver so that it no longer builds its own gnulib and
libiberty. Instead, it now relies on the ones that were already built
at the top level.
gdbsupport is still built specially for gdbserver. This is more
complicated and will be tackled in a subsequent patch.
ChangeLog
2020-02-14 Tom Tromey <tom@tromey.com>
* Makefile.in: Rebuild.
* Makefile.def: Make gdbserver require gnulib and libiberty.
gdbserver/ChangeLog
2020-02-14 Tom Tromey <tom@tromey.com>
* acinclude.m4: Don't include acx_configure_dir.m4.
* Makefile.in (LIBIBERTY_BUILDDIR, GNULIB_BUILDDIR): Update.
(SUBDIRS, CLEANDIRS, REQUIRED_SUBDIRS): Remove.
(all, install-only, uninstall, clean-info, clean)
(maintainer-clean): Don't recurse.
(subdir_do, all-lib): Remove.
($(LIBGNU) $(LIBIBERTY) $(GNULIB_H)): Remove rule.
(GNULIB_H): Remove.
(generated_files): Update.
($(GNULIB_BUILDDIR)/Makefile): Remove rule.
* configure: Rebuild.
* configure.ac: Don't configure gnulib or libiberty.
(GNULIB): Update.
gdbsupport/ChangeLog
2020-02-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Change path to gnulib/config.h.
Change-Id: I469cbbf5db2ab37109c058e9e3a1e4f4dabdfc98
While looking at the output of "maint info bfd" with multiple
inferiors, I noticed that there were duplicate entries for
.gnu_debugdata.
There is no reason to re-create this BFD each time it is needed. This
patch arranges to share the data.
gdb/ChangeLog
2020-02-14 Tom Tromey <tom@tromey.com>
* minidebug.c (gnu_debug_key): New global.
(find_separate_debug_file_in_section): Use it.
Change-Id: If139f89f0f07db33f399afdbcfbf5aaeffe4de46
This updates the gdb testsuite to look for gdbserver in its new
location. The old location is also checked for, on the theory that
perhaps someone sets GDB to a full path for install testing.
gdb/testsuite/ChangeLog
2020-02-14 Tom Tromey <tom@tromey.com>
* lib/gdbserver-support.exp (find_gdbserver): Find gdbserver in
build directory.
* boards/gdbserver-base.exp: Update path to gdbserver.
Change-Id: If03db762ba53882ddfaf2d2d516de14c3fa03938
This callback dynamically allocates a specialized displaced_step_closure, and
gives the ownership of the object to its caller. So I think it would make
sense for the callback to return an std::unique_ptr, this is what this patch
implements.
gdb/ChangeLog:
* gdbarch.sh (displaced_step_copy_insn): Change return type to an
std::unique_ptr.
* gdbarch.c: Re-generate.
* gdbarch.h: Re-generate.
* infrun.c (displaced_step_prepare_throw): Adjust to std::unique_ptr
change.
* aarch64-tdep.c (aarch64_displaced_step_copy_insn): Change return
type to std::unique_ptr.
* aarch64-tdep.h (aarch64_displaced_step_copy_insn): Likewise.
* amd64-tdep.c (amd64_displaced_step_copy_insn): Likewise.
* amd64-tdep.h (amd64_displaced_step_copy_insn): Likewise.
* arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise.
* i386-linux-tdep.c (i386_linux_displaced_step_copy_insn): Likewise.
* i386-tdep.c (i386_displaced_step_copy_insn): Likewise.
* i386-tdep.h (i386_displaced_step_copy_insn): Likewise.
* rs6000-tdep.c (ppc_displaced_step_copy_insn): Likewise.
* s390-tdep.c (s390_displaced_step_copy_insn): Likewise.
displaced_step_inferior_state::reset and displaced_step_clear appear to
have the same goal, but they don't do the same thing.
displaced_step_inferior_state::reset clears more things than
displaced_step_clear, but it misses free'ing the closure, which
displaced_step_clear does.
This patch replaces displaced_step_clear's implementation with just a call to
displaced_step_inferior_state::reset. It then changes
displaced_step_inferior_state::step_closure to be a unique_ptr, to indicate the
fact that displaced_step_inferior_state owns the closure (and so that it is
automatically freed when the field is reset).
The test gdb.base/step-over-syscall.exp caught a problem when doing this, which
I consider to be a latent bug which my cleanup exposes. In
handle_inferior_event, in the TARGET_WAITKIND_FORKED case, if we displaced-step
over a fork syscall, we make sure to restore the memory that we used as a
displaced-stepping buffer in the child. We do so using the
displaced_step_inferior_state of the parent. However, we do it after calling
displaced_step_fixup for the parent, which clears the information in the
parent's displaced_step_inferior_state. It worked fine before, because
displaced_step_clear didn't completely clear the displaced_step_inferior_state
structure, so the required information (in this case the gdbarch) was
still available after clearing.
I fixed it by making GDB restore the child's memory before calling the
displaced_step_fixup on the parent. This way, the data in the
displaced_step_inferior_state structure is still valid when we use it for the
child. This is the error you would get in
gdb.base/step-over-syscall.exp without this fix:
/home/smarchi/src/binutils-gdb/gdb/gdbarch.c:3911: internal-error: ULONGEST gdbarch_max_insn_length(gdbarch*): Assertion `gdbarch != NULL' failed.
gdb/ChangeLog:
* infrun.c (get_displaced_step_closure_by_addr): Adjust to
std::unique_ptr.
(displaced_step_clear): Rename to...
(displaced_step_reset): ... this. Just call displaced->reset ().
(displaced_step_clear_cleanup): Rename to...
(displaced_step_reset_cleanup): ... this.
(displaced_step_prepare_throw): Adjust to std::unique_ptr.
(displaced_step_fixup): Likewise.
(resume_1): Likewise.
(handle_inferior_event): Restore child's memory before calling
displaced_step_fixup on the parent.
* infrun.h (displaced_step_inferior_state) <reset>: Adjust
to std::unique_ptr.
<step_closure>: Change type to std::unique_ptr.
For a fix I intend to submit, I would need a function that counts the
number of set bits in a word. There is __builtin_popcount that is
supported by gcc and clang, but there is also a gnulib module that wraps
that and provides a fallback for other compilers, so I think it would be
good to use it.
I also noticed that there is a bitcount function in arch/arm.c, so I
thought that as a first step I would replace that one with the gnulib
count-one-bits module. This is what this patch does.
The gnulib module provides multiple functions, with various parameter
length (unsigned int, unsigned long int, unsigned long long int), I
chose the one that made sense for each call site based on the argument
type.
gnulib/ChangeLog:
* update-gnulib.sh (IMPORTED_GNULIB_MODULES): Import
count-one-bits module.
* configure: Re-generate.
* aclocal.m4: Re-generate.
* Makefile.in: Re-generate.
* import/count-one-bits.c: New file.
* import/count-one-bits.h: New file.
* import/Makefile.am: Re-generate.
* import/Makefile.in: Re-generate.
* import/m4/gnulib-cache.m4: Re-generate.
* import/m4/gnulib-comp.m4: Re-generate.
* import/m4/count-one-bits.m4: New file.
gdb/ChangeLog:
* arm-tdep.c: Include count-one-bits.h.
(cleanup_block_store_pc): Use count_one_bits.
(cleanup_block_load_pc): Use count_one_bits.
(arm_copy_block_xfer): Use count_one_bits.
(thumb2_copy_block_xfer): Use count_one_bits.
(thumb_copy_pop_pc_16bit): Use count_one_bits.
* arch/arm-get-next-pcs.c: Include count-one-bits.h.
(thumb_get_next_pcs_raw): Use count_one_bits.
(arm_get_next_pcs_raw): Use count_one_bits_l.
* arch/arm.c (bitcount): Remove.
* arch/arm.h (bitcount): Remove.
