This patch adds some --no-tls-optimize tests and performs some of the
existing dynamic tests with tls markers in order to catch any
regression in PLT counting.
* testsuite/ld-powerpc/tlsexe.r: Adjust for added TLSMARK symbol.
* testsuite/ld-powerpc/tlsexe32.r: Likewise.
* testsuite/ld-powerpc/tlsso.r: Likewise.
* testsuite/ld-powerpc/tlsso32.r: Likewise.
* testsuite/ld-powerpc/tls32no.d,
* testsuite/ld-powerpc/tls32no.g: New test files.
* testsuite/ld-powerpc/tlsexe32no.d,
* testsuite/ld-powerpc/tlsexe32no.g,
* testsuite/ld-powerpc/tlsexe32no.r: New test files.
* testsuite/ld-powerpc/tlsexeno.d,
* testsuite/ld-powerpc/tlsexeno.g,
* testsuite/ld-powerpc/tlsexeno.r: New test files.
* testsuite/ld-powerpc/tlsexetocno.d,
* testsuite/ld-powerpc/tlsexetocno.g: New test files.
* testsuite/ld-powerpc/tlsno.d,
* testsuite/ld-powerpc/tlsno.g: New test files.
* testsuite/ld-powerpc/tlstocno.d,
* testsuite/ld-powerpc/tlstocno.g: New test files.
* testsuite/ld-powerpc/powerpc.exp: Run new tests.
1) GOT entries generated for any of the GOT TLS relocations don't need
dynamic relocations for locally defined symbols in PIEs. In the case
of a tls_index doubleword, the dtpmod entry is known to be 1, and the
dtprel entry is also known at link time and relative. Similarly,
dtprel and tprel words are known at link time and relative. (GOT
entries for other than TLS symbols are not relative and thus need
dynamic relocations in PIEs.)
2) Local dynamic TLS code is really only meant for accesses local to
the current binary. There was a cheapskate test for this before using
the common tlsld_got slot, but the test wasn't exactly correct and
might confuse anyone looking at the code. The proper test,
SYMBOL_REFERENCES_LOCAL isn't so expensive that it should be avoided.
3) The same cheap test for local syms when optimising TLS sequences
should be SYMBOL_REFERENCES_LOCAL too.
bfd/
* elf64-ppc.c (ppc64_elf_check_relocs): Move initialisation of vars.
(ppc64_elf_tls_optimize): Correct is_local condition.
(allocate_got): Don't reserve dynamic relocations for any of the
tls got relocs in PIEs when the symbol is local.
(allocate_dynrelocs): Correct validity test for local sym using
tlsld_got slot.
(ppc64_elf_size_dynamic_sections): Don't reserve dynamic relocations
for any of the tls got relocs in PIEs.
(ppc64_elf_layout_multitoc): Likewise.
(ppc64_elf_relocate_section): Correct validity test for local sym
using tlsld_got slot. Don't emit dynamic relocations for any of
the tls got relocs in PIEs when the symbol is local.
* elf32-ppc.c (ppc_elf_tls_optimize): Correct is_local condition.
(got_relocs_needed): Delete.
(allocate_dynrelocs): Correct validity test for local sym using
tlsld_got slot. Don't reserve dynamic relocations for any of the
tls got relocs in PIEs when the symbol is local.
(ppc_elf_size_dynamic_sections): Don't reserve dynamic relocations
for any of the tls got relocs in PIEs.
(ppc_elf_relocate_section): Correct validity test for local sym
using tlsld_got slot. Don't emit dynamic relocations for any of
the tls got relocs in PIEs when the symbol is local.
ld/
* testsuite/ld-powerpc/tlsso.d: Adjust to suit tlsld_got usage change.
* testsuite/ld-powerpc/tlsso.g: Likewise.
* testsuite/ld-powerpc/tlsso.r: Likewise.
* testsuite/ld-powerpc/tlsso32.d: Likewise.
* testsuite/ld-powerpc/tlsso32.g: Likewise.
* testsuite/ld-powerpc/tlsso32.r: Likewise.
On 64-bit host the 32-bit addend was loaded without sign extension into
an unsigned long.
bfd/ChangeLog:
PR ld/25062
* elf32-arm.c (elf32_arm_final_link_relocate): Sign extend data.
ld/ChangeLog:
PR ld/25062
* testsuite/ld-arm/arm-elf.exp: Update.
* testsuite/ld-arm/tls-gdesc-neg.d: New test.
* testsuite/ld-arm/tls-gdesc-neg.s: New test.
This lets other programs read and write CTF-format data.
Two versioned shared libraries are created: libctf.so and
libctf-nobfd.so. They contain identical content except that
libctf-nobfd.so contains no references to libbfd and does not implement
ctf_open, ctf_fdopen, ctf_bfdopen or ctf_bfdopen_ctfsect, so it can be
used by programs that cannot use BFD, like readelf.
The soname major version is presently .0 until the linker API
stabilizes, when it will flip to .1 and hopefully never change again.
New in v3.
v4: libtoolize and turn into a pair of shared libraries. Drop
--enable-install-ctf: now controlled by --enable-shared and
--enable-install-libbfd, like everything else.
v5: Add ../bfd to ACLOCAL_AMFLAGS and AC_CONFIG_MACRO_DIR. Fix tabdamage.
* Makefile.def (host_modules): libctf is no longer no_install.
* Makefile.in: Regenerated.
libctf/
* configure.ac (AC_DISABLE_SHARED): New, like opcodes/.
(LT_INIT): Likewise.
(AM_INSTALL_LIBBFD): Likewise.
(dlopen): Note why this is necessary in a comment.
(SHARED_LIBADD): Initialize for possibly-PIC libiberty: derived from
opcodes/.
(SHARED_LDFLAGS): Likewise.
(BFD_LIBADD): Likewise, for libbfd.
(BFD_DEPENDENCIES): Likewise.
(VERSION_FLAGS): Initialize, using a version script if ld supports
one, or libtool -export-symbols-regex otherwise.
(AC_CONFIG_MACRO_DIR): Add ../BFD.
* Makefile.am (ACLOCAL_AMFLAGS): Likewise.
(INCDIR): New.
(AM_CPPFLAGS): Use $(srcdir), not $(top_srcdir).
(noinst_LIBRARIES): Replace with...
[INSTALL_LIBBFD] (lib_LTLIBRARIES): This, or...
[!INSTALL_LIBBFD] (noinst_LTLIBRARIES): ... this, mentioning new
libctf-nobfd.la as well.
[INSTALL_LIBCTF] (include_HEADERS): Add the CTF headers.
[!INSTALL_LIBCTF] (include_HEADERS): New, empty.
(libctf_a_SOURCES): Rename to...
(libctf_nobfd_la_SOURCES): ... this, all of libctf other than
ctf-open-bfd.c.
(libctf_la_SOURCES): Now derived from libctf_nobfd_la_SOURCES,
with ctf-open-bfd.c added.
(libctf_nobfd_la_LIBADD): New, using @SHARED_LIBADD@.
(libctf_la_LIBADD): New, using @BFD_LIBADD@ as well.
(libctf_la_DEPENDENCIES): New, using @BFD_DEPENDENCIES@.
* Makefile.am [INSTALL_LIBCTF]: Use it.
* aclocal.m4: Add ../bfd/acinclude.m4, ../config/acx.m4, and the
libtool macros.
* libctf.ver: New, everything is version LIBCTF_1.0 currently (even
the unstable components).
* Makefile.in: Regenerated.
* config.h.in: Likewise.
* configure: Likewise.
binutils/
* Makefile.am (LIBCTF): Mention the .la file.
(LIBCTF_NOBFD): New.
(readelf_DEPENDENCIES): Use it.
(readelf_LDADD): Likewise.
* Makefile.in: Regenerated.
ld/
* configure.ac (TESTCTFLIB): Set to the .so or .a, like TESTBFDLIB.
* Makefile.am (TESTCTFLIB): Use it.
(LIBCTF): Use the .la file.
(check-DEJAGNU): Use it.
* Makefile.in: Regenerated.
* configure: Likewise.
include/
* ctf-api.h: Note the instability of the ctf_link interfaces.
This is quite complicated because the CTF section's contents depend on
the final contents of the symtab and strtab, because it has two sections
whose contents are shuffled to be in 1:1 correspondence with the symtab,
and an internal strtab that gets deduplicated against the ELF strtab
(with offsets adjusted to point into the ELF strtab instead). It is
also compressed if large enough, so its size depends on its contents!
So we cannot construct it as early as most sections: we cannot even
*begin* construction until after the symtab and strtab are finalized.
Thankfully there is already one section treated similarly: compressed
debugging sections: the only differences are that compressed debugging
sections have extra handling to deal with their changing name if
compressed (CTF sections are always called ".ctf" for now, though we
have reserved ".ctf.*" against future use), and that compressed
debugging sections have previously-uncompressed content which has to be
stashed away for later compression, while CTF sections have no content
at all until we generate it (very late).
BFD also cannot do the link itself: libctf knows how to do it, and BFD
cannot call libctf directly because libctf already depends on bfd for
file I/O. So we have to use a pair of callbacks, one, examine_strtab,
which allows a caller to examine the symtab and strtab after
finalization (called from elf_link_swap_symbols_out(), right before the
symtabs are written, and after the strtab has been finalized), and one
which actually does the emission (called emit_ctf simply because it is
grouped with a bunch of section-specific late-emission function calls at
the bottom of bfd_elf_final_link, and a section-specific name seems best
for that). emit_ctf is actually called *twice*: once from lang_process
if the emulation suggests that this bfd target does not examine the
symtab or strtab, and once via a bfd callback if it does. (This means
that non-ELF targets still get CTF emitted, even though the late CTF
emission stage is never called for them).
v2: merged with non-ELF support patch: slight commit message
adjustments.
v3: do not spend time merging CTF, or crash, if the CTF section is
explicitly discarded. Do not try to merge or compress CTF unless
linking.
v4: add CTF_COMPRESSION_THRESHOLD. Annul the freed input ctf_file_t's
after writeout: set SEC_IN_MEMORY on the output contents so a future
bfd enhancement knows it could free it. Add SEC_LINKER_CREATED |
SEC_KEEP to avoid having to add .ctf to the linker script. Drop
now-unnecessary ldlang.h-level elf-bfd.h include and hackery around
it. Adapt to elf32.em->elf.em and elf-generic.em->ldelf*.c
changes.
v5: fix tabdamage. Drop #inclusions in .h files: include in .c files,
.em files, and use struct forwards instead. Use bfd_section_is_ctf
inline function rather than SECTION_IS_CTF macro. Move a few
comments.
* Makefile.def (dependencies): all-ld depends on all-libctf.
* Makefile.in: Regenerated.
include/
* bfdlink.h (elf_strtab_hash): New forward.
(elf_sym_strtab): Likewise.
(struct bfd_link_callbacks <examine_strtab>): New.
(struct bfd_link_callbacks <emit_ctf>): Likewise.
bfd/
* elf-bfd.h (bfd_section_is_ctf): New inline function.
* elf.c (special_sections_c): Add ".ctf".
(assign_file_positions_for_non_load_sections): Note that
compressed debugging sections etc are not assigned here. Treat
CTF sections like SEC_ELF_COMPRESS sections when is_linker_output:
sh_offset -1.
(assign_file_positions_except_relocs): Likewise.
(find_section_in_list): Note that debugging and CTF sections, as
well as reloc sections, are assigned later.
(_bfd_elf_assign_file_positions_for_non_load): CTF sections get
their size and contents updated.
(_bfd_elf_set_section_contents): Skip CTF sections: unlike
compressed sections, they have no uncompressed content to copy at
this stage.
* elflink.c (elf_link_swap_symbols_out): Call the examine_strtab
callback right before the strtab is written out.
(bfd_elf_final_link): Don't cache the section contents of CTF
sections: they are not populated yet. Call the emit_ctf callback
right at the end, after all the symbols and strings are flushed
out.
ld/
* ldlang.h: (struct lang_input_statement_struct): Add the_ctf.
(struct elf_sym_strtab): Add forward.
(struct elf_strtab_hash): Likewise.
(ldlang_ctf_apply_strsym): Declare.
(ldlang_write_ctf_late): Likewise.
* ldemul.h (ldemul_emit_ctf_early): New.
(ldemul_examine_strtab_for_ctf): Likewise.
(ld_emulation_xfer_type) <emit_ctf_early>: Likewise.
(ld_emulation_xfer_type) <examine_strtab_for_ctf>: Likewise.
* ldemul.c (ldemul_emit_ctf_early): New.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldlang.c: Include ctf-api.h.
(CTF_COMPRESSION_THRESHOLD): New.
(ctf_output): New. Initialized in...
(ldlang_open_ctf): ... this new function. Open all the CTF
sections in the input files: mark them non-loaded and empty
so as not to copy their contents to the output, but linker-created
so the section gets created in the target.
(ldlang_merge_ctf): New, merge types via ctf_link_add_ctf and
ctf_link.
(ldlang_ctf_apply_strsym): New, an examine_strtab callback: wrap
ldemul_examine_strtab_for_ctf.
(lang_write_ctf): New, write out the CTF section.
(ldlang_write_ctf_late): New, late call via bfd's emit_ctf hook.
(lang_process): Call ldlang_open_ctf, ldlang_merge_ctf, and
lang_write_ctf.
* ldmain.c (link_callbacks): Add ldlang_ctf_apply_strsym,
ldlang_write_ctf_late.
* emultempl/aix.em: Add ctf-api.h.
* emultempl/armcoff.em: Likewise.
* emultempl/beos.em: Likewise.
* emultempl/elf.em: Likewise.
* emultempl/generic.em: Likewise.
* emultempl/linux.em: Likewise.
* emultempl/msp430.em: Likewise.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* emultempl/ticoff.em: Likewise.
* emultempl/vanilla.em: Likewise.
* ldcref.c: Likewise.
* ldctor.c: Likewise.
* ldelf.c: Likewise.
* ldelfgen.c: Likewise.
* ldemul.c: Likewise.
* ldexp.c: Likewise.
* ldfile.c: Likewise.
* ldgram.c: Likewise.
* ldlex.l: Likewise.
* ldmain.c: Likewise.
* ldmisc.c: Likewise.
* ldver.c: Likewise.
* ldwrite.c: Likewise.
* lexsup.c: Likewise.
* mri.c: Likewise.
* pe-dll.c: Likewise.
* plugin.c: Likewise.
* ldelfgen.c (ldelf_emit_ctf_early): New.
(ldelf_examine_strtab_for_ctf): tell libctf about the symtab and
strtab.
(struct ctf_strsym_iter_cb_arg): New, state to do so.
(ldelf_ctf_strtab_iter_cb): New: tell libctf about
each string in the strtab in turn.
(ldelf_ctf_symbols_iter_cb): New, tell libctf
about each symbol in the symtab in turn.
* ldelfgen.h (struct elf_sym_strtab): Add forward.
(struct elf_strtab_hash): Likewise.
(struct ctf_file): Likewise.
(ldelf_emit_ctf_early): Declare.
(ldelf_examine_strtab_for_ctf): Likewise.
* emultempl/elf-generic.em (LDEMUL_EMIT_CTF_EARLY): Set it.
(LDEMUL_EXAMINE_STRTAB_FOR_CTF): Likewise.
* emultempl/aix.em (ld_${EMULATION_NAME}_emulation): Add
emit_ctf_early and examine_strtab_for_ctf, NULL by default.
* emultempl/armcoff.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/beos.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/elf.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/generic.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/linux.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/msp430.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/pe.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/pep.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/ticoff.em (ld_${EMULATION_NAME}_emulation): Likewise.
* emultempl/vanilla.em (ld_vanilla_emulation): Likewise.
* Makefile.am: Pull in libctf (and zlib, a transitive requirement
for compressed CTF section emission). Pass it on to DejaGNU.
* configure.ac: Add AM_ZLIB.
* aclocal.m4: Added zlib.m4.
* Makefile.in: Regenerated.
* testsuite/ld-bootstrap/bootstrap.exp: Use it when relinking ld.
Despite PR19615, it doesn't make sense to use -Bsymbolic with PIEs.
Dynamic symbols in an executable won't be overridden anyway.
* ld.texi (-Bsymbolic, -Bsymbolic-functions): Don't mention PIEs.
* ld.h (symbolic_enum, dynamic_list_enum),
(args_type <symbolic, dynamic_list>): Move to..
* lexsup.c (parse_args): ..here, using auto vars opt_symbolic
and opt_dynamic_list rather than command_line fields. Only
act on -Bsymbolic and -Bsymbolic-functions for shared library
output. Free dynamic_list.
I was looking at the implementation of this script keyword today and
couldn't remember why we do what we do in get_init_priority, because
the comments explain how the init_priority is encoded but don't say
why it is necessary to extract the priority and sort on that. So
after figuring out why (again), I wrote some more comments.
Then I simplified get_init_priority a little, adding some sanity
checking on the strtoul result. This actually makes get_init_priority
support sorting by numerical suffix more generally, but I figure this
feature would be better as a new keyword (without the .ctors/.dtors
special case), so haven't documented the extension.
* ld.texi (SORT_BY_ALIGNMENT): Reword slightly.
(SORT_BY_INIT_PRIORITY): Elucidate.
* ldlang.c: Include limits.h.
(get_init_priority): Comment. Change param to a section,
return an int. Sanity check priority digits. Support sorting
more sections with trailing digits. Return -1 on error.
(compare_section): Adjust.
bfd/
* bfd-in.h: Move arm declaraions..
* cpu-arm.h: ..to here, new file..
* coff-arm.h: ..and here, new file..
* elf32-arm.h: ..and here, new file.
* cpu-arm.c: Include cpu-arm.h.
* coff-arm.c: Include cpu-arm.h and coff-arm.h.
* elf32-arm.c: Include cpu-arm.h and elf32-arm.h.
* pe-arm.c: Move function rename defines later.
* pe-arm-wince.c: Likewise and include sysdep.h and bfd.h early.
* bfd-in2.h: Regenerate.
gas/
* config/tc-arm.c: Include cpu-arm.h.
ld/
* emultempl/armelf.em: Include elf32-arm.h.
* emultempl/pe.em: Move func defines later and include coff-arm.h.
gcc10 on x86_64 and powerpc64le recognises that the loop in
Foo::operator= can be turned into a call to memmove, which then
results in an undefined symbol when linking. Avoid that by making the
loop smaller.
* testsuite/ld-srec/sr3.cc (FOO_MSG_LEN): Set to 4.
For the lui and auipc relaxations, since the symbol value of an undefined weak
symbol is always be zero, we can optimize the patterns into a single LI/MV/ADDI
instruction.
bfd/
* elfnn-riscv.c (riscv_pcgp_hi_reloc): Add new field undefined_weak.
(riscv_record_pcgp_hi_reloc): New parameter undefined_weak.
Set undefined_weak field from it.
(relax_func_t): New parameter undefined_weak.
(_bfd_riscv_relax_call): New ignored parameter undefined_weak.
(_bfd_riscv_relax_tls_le): Likewise.
(_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_delete): Likewise.
(_bfd_riscv_relax_lui): New parameter undefined_weak. If true,
allow relaxing. For LO12* relocs, set rs1 to x0 when undefined_weak.
(_bfd_riscv_relax_pc): New parameter undefined_weak. For LO12* relocs,
set undefined_weak from hi_reloc. If true, allow relaxing. For LO12*
relocs, set rs1 to x0 when undefined_weak and change to non-pcrel
reloc.
(_bfd_riscv_relax_section): New local undefined_weak. Set for
undef weak relocs that can be relaxed. Pass to relax_func call.
ld/
* testsuite/ld-riscv-elf/weakref32.s: Add relaxable undef weak code.
* testsuite/ld-riscv-elf/weakref64.s: Likewise.
* testsuite/ld-riscv-elf/weakref32.d: Updated.
* testsuite/ld-riscv-elf/weakref64.d: Updated.
This one exposed a bug in tic6x gas, found with inline function
parameter type checking. struct bfd_section and struct bfd_symbol
both have a flags field, so bfd_is_com_section (symbol) compiled OK
when bfd_is_com_section was a macro but didn't special case common
symbols.
bfd/
* bfd-in.h (bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment, bfd_section_flags),
(bfd_section_userdata, bfd_is_com_section, discarded_section),
(bfd_get_section_limit_octets, bfd_get_section_limit): Delete macros.
* bfd.c (bfd_get_section_limit_octets, bfd_get_section_limit),
(bfd_section_list_remove, bfd_section_list_append),
(bfd_section_list_prepend, bfd_section_list_insert_after),
(bfd_section_list_insert_before, bfd_section_removed_from_list):
New inline functions.
* section.c (bfd_is_und_section, bfd_is_abs_section),
(bfd_is_ind_section, bfd_is_const_section, bfd_section_list_remove),
(bfd_section_list_append, bfd_section_list_prepend),
(bfd_section_list_insert_after, bfd_section_list_insert_before),
(bfd_section_removed_from_list): Delete macros.
(bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment, bfd_section_flags),
(bfd_section_userdata, bfd_is_com_section, bfd_is_und_section),
(bfd_is_abs_section, bfd_is_ind_section, bfd_is_const_section),
(discarded_section): New inline functions.
* bfd-in2.h: Regenerate.
gas/
* config/tc-tic6x.c (tc_gen_reloc): Correct common symbol check.
ld/
* emultempl/xtensaelf.em (xtensa_get_section_deps): Comment.
Use bfd_section_userdata.
(xtensa_set_section_deps): Use bfd_set_section_userdata.
* ldlang.c (lang_output_section_get): Use bfd_section_userdata.
(sort_def_symbol): Likewise, and bfd_set_section_userdata.
(init_os): Use bfd_set_section_userdata.
(print_all_symbols): Use bfd_section_userdata.
* ldlang.h (get_userdata): Delete.
I get some spurious changes when running autoconf/automake for various
projects in the tree. This is likely because they were generated using
distro-patched tools last time.
I ran `autoreconf -f` in the various automake projects of the
binutils-gdb tree, and this is the result. The tools I am using have
been compiled from source, from the upstream release.
bfd/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gas/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gold/ChangeLog:
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
ld/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
opcodes/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
Fixes a few leaks in bfd and ld.
bfd/
* mach-o.c (bfd_mach_o_fat_member_init): Likewise. Replace
xstrdup and xmalloc with bfd_strdup and bfd_malloc. Return an
error status. Adjust calls.
* vms-lib.c (_bfd_vms_lib_get_module): Test mhd->id earlier.
Close bfd on failure. Replace xstrdup/bfd_alloc use with
bfd_malloc. Use bfd_set_filename.
gdb/
* solib-spu.c (spu_bfd_open): Use bfd_set_filename.
* spu-linux-nat.c (spu_bfd_open): Likewise.
ld/
* emultempl/pe.em (after_open): Use bfd_set_filename.
* emultempl/pep.em (after_open): Use bfd_set_filename.
I think this is safer than leaving an input_statement added during
open_input_bfds off the list. There are a number of places that
fiddle with various lists and might be confused by an off-list
statement, eg. orphan handling.
* ldlang.c (new_afile): Remove add_to_list parameter.
(lang_add_input_file): Update new_afile calls.
(lookup_name): Splice input_statement added by new_afile into
statement_list after current input_file_chain entry.
(lang_process): Update comment.
For some reason, commit 906e58cab5 2008-05-15 excluded input
statements with BFD_LINKER_CREATED BFDs from being printed to map
files. This isn't ideal since it loses claimed plugin BFDs.
* ldlang.c (print_input_statement): Do not exclude linker created
BFDs.
This fixes a problem with commit 128bf1fe60, a patch I made
2019-08-06. Apparently it is possible to trigger the assertion I
added during an LTO bootstrap, something I haven't reproduced.
However, I did find a case triggered by an odd linker script feature
that allows a file to be loaded from the script without specifying
that file on the command line. Regarding input sections:
"When you use a file name which is not an archive:file specifier
and does not contain any wild card characters, the linker will
first see if you also specified the file name on the linker command
line or in an INPUT command. If you did not, the linker will
attempt to open the file as an input file, as though it appeared on
the command line."
So putting
.foo : { foo.a(*) }
into a script supposedly extracts foo.a into .foo. Except it doesn't,
since this feature is meant for object files only. Well anyway,
assuming --whole-archive was given on the command line, foo.a contains
a -flto object and no other objects involved were -flto then we'll hit
the assert due to files added like foo.a here *not* having their input
statement put on the general statement list. Why these are not put on
the statement list isn't obvious but it has been that way since commit
193c5f93a1 in 1994.
PR 24981
* ldlang.c (lang_process): Remove assertion. Comment.
lang_input_section_type** is better than lang_statement_union_type**
here since that is in fact the type passed to the qsort predicate,
and I think it's worth factoring out the common indirections.
* emultempl/beos.em (sort_by_file_name): Use appropriate
intermediary variables.
(sort_by_section_name): Likewise.
This restores a line that has been dropped when the auto-import feature
of the PE-COFF linker was overhauled about one year. It is necessary
for GDB to properly resolve extern symbol in DLLs.
ld/ChangeLog
* pe-dll.c (pe_find_data_imports): Replace again the original name
of the undefined symbol with the __imp_ prefixed one after it is
resolved.
The loads and stores handled in the second instruction of a sequence
marked by R_PPC64_PCREL_OPT may be a prefix instruction. For example:
pld ra,symbol@got@pcrel
0:
pld rt,off(ra)
.reloc 0b-8,R_PPC64_PCREL_OPT,(.-8)-(0b-8)
can be optimised to
pld rt,symbol+off@pcrel
pnop
* elf64-ppc.c (xlate_pcrel_opt): Handle prefix loads and stores
in second instruction.
(ppc64_elf_relocate_section): Likewise.
Caused by the PR24406 fix. unwrap_hash_lookup shouldn't be called
with link_info.wrap_hash NULL.
PR ld/24406
* plugin.c (get_symbols): Test link_info.wrap_hash before calling
unwrap_hash_lookup.
This patch fixes a few linker crashes due to TLS code reaching an assert when it
shouldn't.
The first scenario is with weak TLS symbols that remain weak during linking. In
this case the mid-end would not have seen a TLS symbol and so wouldn't have
allocated the TLS section. We currently assert here and the linker crashes with
a not very useful message.
This patch changes this to return the value 0 for the TLS symbol in question
emulating what lld and gold and other BFD targets do. However because weak TLS
is implementation defined and we don't define any behavior for it I also emit a
warning to the user to inform them of such.
Secondly when a strong TLS reference is undefined. The linker crashes even after
it correctly reported that there is an undefined reference. This changes it so
that it gracefully exits and reports a useful error.
bfd/ChangeLog:
PR ld/24601
* elfnn-aarch64.c (aarch64_relocate): Handle weak TLS and undefined TLS.
Also Pass input_bfd to _bfd_aarch64_elf_resolve_relocation.
* elfxx-aarch64.c (_bfd_aarch64_elf_resolve_relocation): Use it.
* elfxx-aarch64.h (_bfd_aarch64_elf_resolve_relocation): Emit warning
for weak TLS.
ld/ChangeLog:
PR ld/24601
* testsuite/ld-aarch64/aarch64-elf.exp (undef-tls, weak-tls): New.
* testsuite/ld-aarch64/undef-tls.d: New test.
* testsuite/ld-aarch64/undef-tls.s: New test.
* testsuite/ld-aarch64/weak-tls.d: New test.
* testsuite/ld-aarch64/weak-tls.s: New test.
We currently use a padding NOP after a Thumb to Arm interworking veneer (BX pc).
The NOP is never executed but may result in a performance penalty on some cores.
For this reason this patch changes the NOPs after Thumb to Arm veneers into B .-2
and adds a note to this in the source code for future reference.
bfd/ChangeLog:
* elf32-arm.c (elf32_thumb2_plt_entry, elf32_arm_plt_thumb_stub,
elf32_arm_stub_long_branch_v4t_thumb_thumb,
elf32_arm_stub_long_branch_v4t_thumb_arm,
elf32_arm_stub_short_branch_v4t_thumb_arm,
elf32_arm_stub_long_branch_v4t_thumb_arm_pic,
elf32_arm_stub_long_branch_v4t_thumb_thumb_pic,
elf32_arm_stub_long_branch_v4t_thumb_tls_pic): Change nop to branch to
previous instruction.
ld/ChangeLog:
* testsuite/ld-arm/cortex-a8-fix-b-plt.d: Update Testcase.
* testsuite/ld-arm/cortex-a8-fix-b-rel-arm.d: Likewise.
* testsuite/ld-arm/cortex-a8-fix-bcc-plt.d: Likewise.
* testsuite/ld-arm/farcall-cond-thumb-arm.d: Likewise.
* testsuite/ld-arm/farcall-mixed-app.d: Likewise.
* testsuite/ld-arm/farcall-mixed-app2.d: Likewise.
* testsuite/ld-arm/farcall-mixed-lib-v4t.d: Likewise.
* testsuite/ld-arm/farcall-thumb-arm-pic-veneer.d: Likewise.
* testsuite/ld-arm/farcall-thumb-arm-short.d: Likewise.
* testsuite/ld-arm/farcall-thumb-arm.d: Likewise.
* testsuite/ld-arm/farcall-thumb-thumb-pic-veneer.d: Likewise.
* testsuite/ld-arm/farcall-thumb-thumb.d: Likewise.
* testsuite/ld-arm/fix-arm1176-on.d: Likewise.
* testsuite/ld-arm/ifunc-10.dd: Likewise.
* testsuite/ld-arm/ifunc-2.dd: Likewise.
* testsuite/ld-arm/ifunc-4.dd: Likewise.
* testsuite/ld-arm/ifunc-6.dd: Likewise.
* testsuite/ld-arm/ifunc-8.dd: Likewise.
* testsuite/ld-arm/jump-reloc-veneers-long.d: Likewise.
* testsuite/ld-arm/mixed-app.d: Likewise.
* testsuite/ld-arm/thumb2-b-interwork.d: Likewise.
* testsuite/ld-arm/tls-longplt.d: Likewise.
* testsuite/ld-arm/tls-thumb1.d: Likewise.
commit 83924b3846
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Tue Feb 5 18:45:23 2019 -0800
x86-64: Restore PIC check for PCREL reloc against protected symbol
moved PIC check for PC-relative relocations to elf_x86_64_check_relocs.
Since linker defined symbols may not be processed at the time, we need
to move the check back to elf_x86_64_relocate_section.
bfd/
PR ld/24905
* elf64-x86-64.c (elf_x86_64_check_relocs): Move PIC check for
PC-relative relocations back to ...
(elf_x86_64_relocate_section): Here.
ld/
PR ld/24905
* testsuite/ld-x86-64/pr24905-x32.d: New file.
* testsuite/ld-x86-64/pr24905.d: Likewise.
* testsuite/ld-x86-64/pr24905.s: Likewise.
* testsuite/ld-x86-64/pr24905.t: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr24905 and pr24905-x32.
git commit 3e04d7655b introduced a bug by sizing output sections
earlier in ppc_before_allocation. That meant PLT (and GOT) sizes were
not included when calculating total executable section sizes.
* emultempl/ppc32elf.em (ppc_before_allocation): Force running
prelim_size_sections before deciding whether branch trampolines
might be needed.
This fixes a problem originally reported at
https://github.com/riscv/riscv-binutils-gdb/issues/173
If you have code linked at address zero, you can have a lui instruction
loading a value 0x800 which gets relaxed to a c.lui which is valid (c.lui 0x1
followed by addi -0x800). Relaxation can reduce the value below 0x800 at which
point the c.lui 0x0 is no longer valid. We can fix this by converting the
c.lui to a c.li which can load 0.
bfd/
* elfnn-riscv.c (perform_relocation) <R_RISCV_RVC_LUI>: If
RISCV_CONST_HIGH_PART (value) is zero, then convert c.lui instruction
to c.li instruction, and use ENCODE_RVC_IMM to set value.
ld/
* testsuite/ld-riscv-elf/c-lui-2.d: New.
* testsuite/ld-riscv-elf/c-lui-2.ld: New.
* testsuite/ld-riscv-elf/c-lui-2.s: New.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run the c-lui-2 test.
"next" and "next_real_file" in lang_input_statement_type always point
to another lang_input_statement_type, so it makes sense for these to
not be the generic lang_statement_union_type. This patch also updates
a number of variables in ldlang.c for the same reason, and modifies
lang_statement_append to reduce the need for casts.
* ldlang.h (lang_input_statement_type): Make next
and next_real_file a lang_input_statement_type pointer.
(lang_statement_append): Delete prototype.
(LANG_FOR_EACH_INPUT_STATEMENT): Update for lang_input_statement_type
change.
* ldmain.c (add_archive_element): Likewise.
* ldlang.c: Likewise throughout.
(lang_statement_append): Make static. Make element and field
void pointers. Remove casts in calls.
(lang_check): Use a lang_input_statement_type pointer for "file".
(find_rescan_insertion): Similarly for "iter" and return value.
(lang_process): Similarly for "insert", "iter" and "temp".
* emultempl/spuelf.em (embedded_spu_file): Likewise.
* emultempl/aix.em (gld${EMULATION_NAME}_before_allocation): Expand
lang_statment_append call.
This patch is a reimplementation of [1] which was submitted in 2015 by
Neil Schellenberger. Copyright issue was sorted out [2] last year.
It proposed a new section (.gnu.xhash) and related dynamic tag
(DT_GNU_XHASH). The new section would be virtually identical to the
existing .gnu.hash except for the translation table (xlat) which would
contain correct MIPS .dynsym indexes corresponding to the hashvals in
chains. This is because MIPS ABI imposes a different ordering on the
dynsyms than the one expected by the .gnu.hash section. Another addition
would be a leading word (ngnusyms) which would contain the number of
entries in the translation table.
In this patch, the new section name and dynamic tag are changed to
reflect the fact that the section should be treated as MIPS-specific
(.MIPS.xhash and DT_MIPS_XHASH).
This patch addresses the alignment issue as reported in [3], which is
caused by the leading word added to the .MIPS.xhash section. Leading word
is removed in this patch, and the number of entries in the translation
table is now calculated using DT_MIPS_SYMTABNO dynamic tag (this is
addressed by the corresponding glibc patch).
Suggestions on coding style in [4] were taken into account. Existing
GNU hash testcase was covered, and another one was added in the MIPS
part of the testsuite.
The other major change is reserving MIPS ABI version 5 for .MIPS.xhash,
marking the need of support for .MIPS.xhash in the dynamic linker (again,
addressed in the corresponding glibc patch). This is something which I
am not sure of, especially after reading [5]. I am confused on whether
this ABI version is reserved for IFUNC, or it can be used for this
purpose.
Already mentioned glibc patch is submitted at:
https://sourceware.org/ml/libc-alpha/2019-06/msg00456.html
[1] https://sourceware.org/ml/binutils/2015-10/msg00057.html
[2] https://sourceware.org/ml/binutils/2018-03/msg00025.html
[3] https://sourceware.org/ml/binutils/2016-01/msg00006.html
[4] https://sourceware.org/ml/binutils/2016-02/msg00097.html
[5] https://sourceware.org/ml/libc-alpha/2016-12/msg00853.html
ld * emulparams/elf32bmip.sh: Add .MIPS.xhash section.
* emulparams/elf32bmipn32-defs.sh: Add .MIPS.xhash section.
* emulparams/elf64bmip-defs.sh: Add .MIPS.xhash section.
* emultempl/mipself.em: Remove mips_after_parse function.
* testsuite/ld-elf/hash.d: Update comment.
* testsuite/ld-mips-elf/hash1.d: New test.
* testsuite/ld-mips-elf/hash1.s: Ditto.
* testsuite/ld-mips-elf/hash1a.d: Remove.
* testsuite/ld-mips-elf/hash1b.d: Ditto.
* testsuite/ld-mips-elf/hash1c.d: Ditto
* testsuite/ld-mips-elf/hash2.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: New tests.
* testsuite/ld-mips-elf/start.s: New test.
bfd * elf-bfd.h (struct elf_backend_data): New members.
* elflink.c (_bfd_elf_link_create_dynamic_sections): Create
.gnu.hash section if necessary.
(struct collect_gnu_hash_codes): New member.
(elf_gnu_hash_process_symidx): New function name.
(elf_renumber_gnu_hash_syms): Ignore local and undefined
symbols. Record xlat location for every symbol which should have
a .MIPS.xhash entry.
(bfd_elf_size_dynamic_sections): Add DT_GNU_HASH dynamic tag to
dynamic section if necessary.
(GNU_HASH_SECTION_NAME): New define.
(bfd_elf_size_dynsym_hash_dynstr): Get .MIPS.xhash section.
Update the section size info.
* elfxx-mips.c (struct mips_elf_hash_sort_data): New members.
(struct mips_elf_link_hash_entry): New member.
(mips_elf_link_hash_newfunc): Initialize .MIPS.xhash translation
table location.
(mips_elf_sort_hash_table): Initialize the pointer to the
.MIPS.xhash section.
(mips_elf_sort_hash_table_f): Populate the .MIPS.xhash
translation table entry with the symbol dynindx.
(_bfd_mips_elf_section_from_shdr): Add SHT_MIPS_XHASH.
(_bfd_mips_elf_fake_sections): Initialize .MIPS.xhash section
info.
(_bfd_mips_elf_create_dynamic_sections): Create .MIPS.xhash
section.
(_bfd_mips_elf_size_dynamic_sections): Add DT_MIPS_XHASH tag to
dynamic section.
(_bfd_mips_elf_finish_synamic_sections): Add DT_MIPS_XHASH.
(_bfd_mips_elf_final_write_processing): Set .MIPS.xhash section
sh_link info.
(_bfd_mips_elf_get_target_dtag): Get DT_MIPS_XHASH tag.
(MIPS_LIBC_ABI_XHASH): New ABI version enum value.
(_bfd_mips_post_process_headers): Mark the ABI version as
MIPS_LIBC_ABI_XHASH if there exists a .MIPS.xhash section,
but not a .hash section.
(_bfd_mips_elf_record_xhash_symbol): New function. Record a
position in the translation table, associated with the hash
entry.
* elfxx-mips.h (literal_reloc_p): Define
elf_backend_record_xhash_symbol backend hook.
* elfxx-target.h: Initialize elf_backend_record_xhash_symbol
backend hook.
include * elf/mips.h (SHT_GNU_XHASH): New define.
(DT_GNU_XHASH): New define.
binutils * readelf.c (get_mips_dynamic_type): Return MIPS_XHASH dynamic type.
(get_mips_section_type_name): Return MI{S_XHASH name string.
(dynamic_section_mips_val): Initialize the .MIPS.xhash dynamic
info.
(process_symbol_table): Initialize the .MIPS.xhash section
pointer. Adjust the readelf output to support the new section.
(process_object): Set the .MIPS.xhash dynamic info to zero.
This patch makes the elf64bpf emulation to use it's own linker script,
based on elf.sc. At the moment, the only change is that the BPF
executable doesn't define an entry symbol (BPF programs feature
several entry points scattered in several sections.)
This is a step towards the goal of generating proper ELF executables
that would be loaded by the kernel's libbpf. We are not there yet:
BPF "programs" should still be linked with -r.
This change removes a warning while linking executables, decreases the
number of unsupported tests in the target from 47 to 29, and increases
the number of expected passes from 104 to 145.
Regtested in x86_64 for all targets.
No regressions.
ld/ChangeLog:
2019-08-07 Jose E. Marchesi <jose.marchesi@oracle.com>
* scripttempl/elf64bpf.sc: Adapted from elf.sc.
* emulparams/elf64bpf.sh (SCRIPT_NAME): Use elf64bpf.
(EMBEDDED): Define.
* testsuite/ld-bpf/call-1.d: Do not expect a warning regarding an
undefined entry symbol.
* testsuite/ld-bpf/jump-1.d: Likewise.
* testsuite/ld-undefined/undefined.exp: Do not pass '-e entry' to
ld in BPF targets, and do not expect line number information.
* testsuite/ld-srec/srec.exp (run_srec_test): xfail s-record tests
in BPF targets.
This is a mostly cosmetic fix for cases like PR24873 where LTO
recompiled objects were supposed to be inserted inside a group. The
specific case handled by this patch is when the first file inside a
group is an archive, the first file claimed by the plugin. Prior to
this patch we would have inserted the recompiled objects before the
group, which doesn't matter really since the entire group will be
reloaded, but it looks a little wrong in map files.
PR 24873
* ldlang.c (find_replacements_insert_point): Return "before" flag.
(find_next_input_statement): New function.
(lang_process): When placing recompiled LTO objects before a
claimed archive, place them immediately before in the statement
list.
Reloading of archives (and checking --as-needed DSOs again) is
disabled until we hit the plugin insert point. It's necessary to do
that because in a case like lib1.a lto.o lib2.a where lib1.a and
lib2.a contain duplicate symbols, we want the lto.o recompiled object
to pull in objects from lib2.a as necessary, but not from lib1.a.
Unfortunately this heuristic fails when the insert point is inside a
group, because ld actually loads the symbols from the recompiled
object before running over the contours of the script, thus missing
the fact that new undefs appeared in the group.
PR 24873
* ldlang.c (plugin_undefs): New static var.
(open_input_bfds <lang_group_statement_enum>): Loop on
plugin_undefs and hitting plugin_insert point.
(lang_process <lto_plugin_active>): Set plugin_undefs.
This patch processes INSERT AFTER and INSERT BEFORE in a user -T
script when such a script is invoked on the command line inside
--start-group/--end-group. Also, ld now warns when the user simply
forgot --end-group.
PR 24806
* ldlang.c (process_insert_statements): Add start of list
parameter. Use rather than lang_os_list.head. Process insert
statements inside group statements with a recursive call.
(lang_process): Adjust process_insert_statements call.
* lexsup.c (parse_args): Warn when adding missing --end-group.
The idea is to make it a little easier to find uses of this list,
so searches don't hit occurrences of lang_output_section_statement_type
and lang_output_section_statement_enum.
* ldlang.h (lang_os_list): Rename from lang_output_section_statement.
* ldlang.c: Likewise throughout file.
* emultempl/alphaelf.em: Likewise.
* emultempl/elf32.em: Likewise.
* emultempl/mmo.em: Likewise.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* emultempl/ppc32elf.em: Likewise.
* emultempl/spuelf.em: Likewise.
Revert
commit 8c728a9d93
Author: Martin Liska <mliska@suse.cz>
Date: Mon Jul 22 14:23:32 2019 +0200
Remove tests that test __gnu_lto_v1 symbol.
since outputs of these tests are used by later tests. Check the normal
symbol, foo, instead of __gnu_lto_v.*, which GCC stopped emitting after
r273662.
* testsuite/ld-plugin/lto-3r.d: Restored. Check foo instead
of __gnu_lto_v.*.
* testsuite/ld-plugin/lto-5r.d: Likewise.
* testsuite/ld-plugin/lto.exp: Run lto-3r and lto-5r tests.
Add linker relaxation. The first relaxation added is converting
GOTPC32 to PCREL relocations. This relaxation doesn't change the size of
the binary.
bfd/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* elf32-arc.c (bfd_get_32_me): New function.
(bfd_put_32_me): Likewise.
(arc_elf_relax_section): Likewise.
(bfd_elf32_bfd_relax_section): Define.
ld/testsuite/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* ld-arc/relax-local-pic.d: New test.
* ld-arc/relax-local-pic.s: New file.
ld/ChangeLog:
2019-07-22 Martin Liska <mliska@suse.cz>
* testsuite/ld-plugin/lto-3r.d: Remove.
* testsuite/ld-plugin/lto-5r.d: Remove.
* testsuite/ld-plugin/lto.exp: Do not run lto-3r and lto-5r
tests.
When SHF_GNU_MBIND was added in the SHF_LOOS to SHF_HIOS range, it
should have required ELFOSABI_GNU since these flags are already in use
by other OSes. HPUX SHF_HP_TLS in fact has the same value. That
means no place in binutils should test SHF_GNU_MBIND without first
checking OSABI, and SHF_GNU_MBIND should not be set without also
setting OSABI. At least, that's the ideal, but the patch accepts
SHF_GNU_MBIND on ELFOSABI_NONE object files since gas didn't always
set OSABI. However, to reinforce the fact that SHF_GNU_MBIND isn't
proper without a non-zero OSABI, readelf will display the flag as
LOOS+0 if OSABI isn't set.
The clash with SHF_HP_TLS means that hppa64-linux either has that flag
on .tbss sections or supports GNU_MBIND, not both. (hppa64-linux
users, if there are any, may have noticed that GNU ld since 2017
mysteriously aligned their .tbss sections to a 4k boundary. That was
one consequence of SHF_HP_TLS being blindly interpreted as
SHF_GNU_MBIND.) Since it seems that binutils, gdb, gcc, glibc, and
the linux kernel don't care about SHF_HP_TLS I took that flag out of
.tbss for hppa64-linux.
bfd/
* elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_mbind.
* elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_mbind.
(get_program_header_size): Formatting. Only test SH_GNU_MBIND
when elf_gnu_osabi_mbind is set.
(_bfd_elf_map_sections_to_segments): Likewise.
(_bfd_elf_init_private_section_data): Likewise.
(_bfd_elf_final_write_processing): Update comment.
* elf64-hppa.c (elf64_hppa_special_sections): Move .tbss entry.
(elf_backend_special_sections): Define without .tbss for linux.
binutils/
* readelf.c (get_parisc_segment_type): Split off hpux entries..
(get_ia64_segment_type): ..and these..
(get_hpux_segment_type): ..to here.
(get_segment_type): Condition GNU_MBIND on osabi. Use
get_hpux_segment_type.
(get_symbol_binding): Do not print UNIQUE for ELFOSABI_NONE.
(get_symbol_type): Do not print IFUNC for ELFOSABI_NONE.
gas/
* config/obj-elf.c (obj_elf_change_section): Don't emit a fatal
error for non-SHF_ALLOC SHF_GNU_MBIND here.
(obj_elf_parse_section_letters): Return SHF_GNU_MBIND in new
gnu_attr param.
(obj_elf_section): Adjust obj_elf_parse_section_letters call.
Formatting. Set SHF_GNU_MBIND and elf_osabi from gnu_attr.
Emit normal error for non-SHF_ALLOC SHF_GNU_MBIND and wrong osabi.
(obj_elf_type): Set elf_osabi for ifunc.
* testsuite/gas/elf/section12a.d: xfail msp430 and hpux.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.l: Adjust expected error.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Condition
SHF_GNU_MBIND on osabi. Set output elf_gnu_osabi_mbind.
Also restore them somewhat closer to the original. They originally
failed on many targets, and a month later I "simplified" them as part
of a larger patch fixing other failing tests. That unfortunately lost
their main purpose, which was to test TLS layout.
* testsuite/ld-elf/size-1.d,
* testsuite/ld-elf/size-1.s,
* testsuite/ld-elf/size-1.t: New test.
* testsuite/ld-elf/size-2.d,
* testsuite/ld-elf/size-2.s,
* testsuite/ld-elf/size-2.t: New test.
* testsuite/ld-scripts/size-1.d,
* testsuite/ld-scripts/size-1.s,
* testsuite/ld-scripts/size-1.t,
* testsuite/ld-scripts/size-2.s,
* testsuite/ld-scripts/size-2.d,
* testsuite/ld-scripts/size-2.t,
* testsuite/ld-scripts/size.exp: Delete.
This patch supports using pcrel instructions in TLS code sequences. A
number of new relocations are needed, gas operand modifiers to
generate those relocations, and new TLS optimisation. For
optimisation it turns out that the new pcrel GD and LD sequences can
be distinguished from the non-pcrel GD and LD sequences by there being
different relocations on the new sequence. The final "add ra,rb,13"
on IE sequences similarly needs a new relocation, or as I chose, a
modification of R_PPC64_TLS. On pcrel IE code, the R_PPC64_TLS points
one byte into the "add" instruction rather than being on the
instruction boundary.
GD:
pla 3,z@got@tlsgd@pcrel # R_PPC64_GOT_TLSGD34
bl __tls_get_addr@notoc(z@tlsgd) # R_PPC64_TLSGD and R_PPC64_REL24_NOTOC
edited to IE
pld 3,z@got@tprel@pcrel
add 3,3,13
edited to LE
paddi 3,13,z@tprel
nop
LD:
pla 3,z@got@tlsld@pcrel # R_PPC64_GOT_TLSLD34
bl __tls_get_addr@notoc(z@tlsld) # R_PPC64_TLSLD and R_PPC64_REL24_NOTOC
..
paddi 9,3,z2@dtprel
pld 10,z3@got@dtprel@pcrel
add 10,10,3
edited to LE
paddi 3,13,0x1000
nop
IE:
pld 9,z@got@tprel@pcrel # R_PPC64_GOT_TPREL34
add 3,9,z@tls@pcrel # R_PPC64_TLS at insn+1
ldx 4,9,z@tls@pcrel
lwax 5,9,z@tls@pcrel
stdx 5,9,z@tls@pcrel
edited to LE
paddi 9,13,z@tprel
nop
ld 4,0(9)
lwa 5,0(9)
std 5,0(9)
LE:
paddi 10,13,z@tprel
include/
* elf/ppc64.h (R_PPC64_TPREL34, R_PPC64_DTPREL34),
(R_PPC64_GOT_TLSGD34, R_PPC64_GOT_TLSLD34),
(R_PPC64_GOT_TPREL34, R_PPC64_GOT_DTPREL34): Define.
(IS_PPC64_TLS_RELOC): Include new tls relocs.
bfd/
* reloc.c (BFD_RELOC_PPC64_TPREL34, BFD_RELOC_PPC64_DTPREL34),
(BFD_RELOC_PPC64_GOT_TLSGD34, BFD_RELOC_PPC64_GOT_TLSLD34),
(BFD_RELOC_PPC64_GOT_TPREL34, BFD_RELOC_PPC64_GOT_DTPREL34),
(BFD_RELOC_PPC64_TLS_PCREL): New pcrel tls relocs.
* elf64-ppc.c (ppc64_elf_howto_raw): Add howtos for pcrel tls relocs.
(ppc64_elf_reloc_type_lookup): Translate pcrel tls relocs.
(must_be_dyn_reloc, dec_dynrel_count): Add R_PPC64_TPREL64.
(ppc64_elf_check_relocs): Support pcrel tls relocs.
(ppc64_elf_tls_optimize, ppc64_elf_relocate_section): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): Map "tls@pcrel", "got@tlsgd@pcrel",
"got@tlsld@pcrel", "got@tprel@pcrel", and "got@dtprel@pcrel".
(fixup_size, md_assemble): Handle pcrel tls relocs.
(ppc_force_relocation, ppc_fix_adjustable): Likewise.
(md_apply_fix, tc_gen_reloc): Likewise.
ld/
* testsuite/ld-powerpc/tlsgd.d,
* testsuite/ld-powerpc/tlsgd.s,
* testsuite/ld-powerpc/tlsie.d,
* testsuite/ld-powerpc/tlsie.s,
* testsuite/ld-powerpc/tlsld.d,
* testsuite/ld-powerpc/tlsld.s: New tests.
* testsuite/ld-powerpc/powerpc.exp: Run them.
Just making room for a new tlsld test.
* testsuite/ld-powerpc/tlsldopt.d: Rename from tlsld.d.
* testsuite/ld-powerpc/tlsldopt.s: Rename from tlsld.s.
* testsuite/ld-powerpc/tlsldopt32.d: Rename from tlsld32.d.
* testsuite/ld-powerpc/tlsldopt32.s: Rename from tlsld32.s.
* testsuite/ld-powerpc/powerpc.exp: Update.
When doing a relocatable link, members of input section group are
placed in their own output sections. We need to make sure that no
input sections are merged with member of output section group.
PR ld/24819
* emultempl/elf32.em (elf_orphan_compatible): Return FALSE for
member of output section group when doing a relocatable link.
* testsuite/ld-elf/pr24819.d: New file.
* testsuite/ld-elf/pr24819.s: Likewise.
It is possible to create shared libraries on PowerPC using
-ftls-model=inital-exec or -ftls-model=local-exec. The first is half
reasonable, getting you a shared library that can't be dlopen'd but
otherwise is reasonable. The second is quite bad. Not only do you
lose being able to dlopen, the library also has dynamic text
relocations. Worse, the TPREL16_LO, TPREL16_HA and other TPREL16
dynamic relocs emitted were wrong, resulting in wrong values being
applied by ld.so.
Using the first TLS section symbol in dynamic relocations for local
TLS symbols doesn't work. It's wrong because TLS symbols used by TLS
relocs have values relative to the TLS segment, whereas the TLS
section symbols are addresses. This patch instead uses a symbol index
of zero which is used elsewhere by PowerPC on dynamic TLS relocs.
It's not strictly ABI compliant to use a non-TLS symbol with TLS
relocs but symbol index zero can be interpreted as "no symbol". Not
using the first TLS section symbol means it doesn't need to be dynamic.
The patch also fixes a further problem with PowerPC32 dynamic TPREL16*
relocs, which shouldn't have the symbol value in the addend as we do
for non-TLS symbols.
bfd/
* elflink.c (_bfd_elf_omit_section_dynsym_default): Don't keep
tls_sec.
(_bfd_elf_init_1_index_section): Prefer not using TLS sections.
(_bfd_elf_init_2_index_sections): Likewise.
* elf64-ppc.c (ppc64_elf_relocate_section): When emitting dynamic
relocations for local TLS symbols, use STN_UNDEF as the relocation
symbol.
* elf32-ppc.c (ppc_elf_relocate_section): Likewise, and don't
leave TLS symbol value in the addend.
ld/
* testsuite/ld-powerpc/tlsso.r: Update.
* testsuite/ld-powerpc/tlsso32.g: Update.
* testsuite/ld-powerpc/tlsso32.r: Update.
* testsuite/ld-powerpc/tlstocso.r: Update.
* testsuite/ld-cris/tls-dso-dtpoffd2.d: Update.
* testsuite/ld-cris/tls-dso-dtpoffd4.d: Update.
* testsuite/ld-cris/tls-dso-tpoffgotcomm1.d: Update.
* testsuite/ld-cris/tls-gd-1.d: Update.
* testsuite/ld-cris/tls-gd-1h.d: Update.
* testsuite/ld-cris/tls-gd-2.d: Update.
* testsuite/ld-cris/tls-gd-2h.d: Update.
* testsuite/ld-cris/tls-ie-10.d: Update.
* testsuite/ld-cris/tls-ie-11.d: Update.
* testsuite/ld-cris/tls-ie-8.d: Update.
* testsuite/ld-cris/tls-ie-9.d: Update.
* testsuite/ld-cris/tls-js1.d: Update.
* testsuite/ld-cris/tls-ld-4.d: Update.
* testsuite/ld-cris/tls-ld-5.d: Update.
* testsuite/ld-cris/tls-ld-6.d: Update.
* testsuite/ld-cris/tls-ld-7.d: Update.
* testsuite/ld-cris/tls-ldgd-14.d: Update.
* testsuite/ld-cris/tls-ldgd-15.d: Update.
* testsuite/ld-cris/tls-ldgdx-14.d: Update.
* testsuite/ld-cris/tls-ldgdx-15.d: Update.
* testsuite/ld-cris/tls-local-54.d: Update.
* testsuite/ld-cris/tls-local-60.d: Update.
* testsuite/ld-cris/tls-local-61.d: Update.
* testsuite/ld-cris/tls-local-63.d: Update.
* testsuite/ld-cris/tls-local-64.d: Update.
* testsuite/ld-cris/tls-ok-30.d: Update.
* testsuite/ld-cris/tls-ok-32.d: Update.
* testsuite/ld-cris/tls-ok-34.d: Update.
* testsuite/ld-mips-elf/tls-multi-got-1.got: Update.
* testsuite/ld-mips-elf/tls-multi-got-1.r: Update.
* testsuite/ld-mips-elf/tlsdyn-pie-o32.d: Update.
* testsuite/ld-mips-elf/tlsdyn-pie-o32.got: Update.
* testsuite/ld-mips-elf/tlslib-o32-hidden.got: Update.
* testsuite/ld-mips-elf/tlslib-o32-ver.got: Update.
* testsuite/ld-mips-elf/tlslib-o32.got: Update.
* testsuite/ld-s390/tlspic.rd: Update.
* testsuite/ld-s390/tlspic_64.rd: Update.
* testsuite/ld-sparc/tlssunnopic32.rd: Update.
* testsuite/ld-sparc/tlssunnopic64.rd: Update.
* testsuite/ld-sparc/tlssunpic32.rd: Update.
* testsuite/ld-sparc/tlssunpic64.rd: Update.
This stops the first overlay section being ignored when empty,
losing its LMA assignment
PR 24786
* ldlang.h (enum section_type): Add first_overlay_section.
* ldlang.c (lang_add_section): Adjust switch statement.
(map_input_to_output_sections): Likewise.
(lang_size_sections_1): Always set last_os for first overlay section.
(lang_leave_overlay): Set sectype to first_overlay_section.
Recently a patch was submitted for a Xen Project test harness binary to
override the compiler specified @object to @func (see [1]). In a reply I
suggested we shouldn't make ourselves dependent on currently unspecified
behavior of gas here: It accumulates all requests, and then
bfd/elf.c:swap_out_syms(), in an apparently ad hoc manner, prioritizes
certain flags over others.
Make the behavior predictable: Generally the last .type is what counts.
Exceptions are directives which set multiple bits (TLS, IFUNC, and
UNIQUE): Subsequent directives requesting just the more generic bit
(i.e. FUNC following IFUNC) won't clear the more specific one. Warn
about incompatible changes, except from/to STT_NOTYPE.
Also add a new target hook, which hppa wants to use right away afaict.
In the course of adding the warning I ran into two ld testsuite
failures. I can only assume that it was a copy-and-paste mistake that
lead to the same symbol having its type set twice.
[1] https://lists.xenproject.org/archives/html/xen-devel/2019-05/msg01980.html
PR 24753
bfd * compress.c (bfd_get_full_section_contents): Do not complain
about linker created sections that are larger than the file size.
ld * emultempl/aarch64elf.em (_aarch64_add_stub_section): Include the
LINKER_CREATED section flag when creating the stub section.
Consider a file containing only Armv8-M secure entry functions.
This file is compiled and linked with "-march=armv8-m.main -mfloat-abi=hard
-mfpu=fpv5-sp-d16 -mcmse -static --specs=rdimon.specs
-Wl,--section-start,.gnu.sgstubs=0x190000 -ffunction-sections
-fdata-sections
-Wl,--gc-sections -g" options to generate an executable.
The executable generated does not contain any debug information of these
secure entry functions even though it contains secure entry functions in
the .text section. This patch fixes this problem.
PR 23839
bfd * elf32-arm.c (elf32_arm_update_relocs): Do not include the
section VMA in the offset used to update exidx relocs.
ld * testsuite/ld-arm/unwind-4.d: Adjust for corrected calculation of
exidx relocs.
With my (oldish) gcc/glibc combination I'm seeing
.../ld/plugin.c: In function get_lto_kind:
.../ld/plugin.c:664: error: declaration of index shadows a global declaration
/usr/include/string.h:487: error: shadowed declaration is here
.../ld/plugin.c: In function get_lto_resolution:
.../ld/plugin.c:685: error: declaration of index shadows a global declaration
/usr/include/string.h:487: error: shadowed declaration is here
.../ld/plugin.c: In function get_lto_visibility:
.../ld/plugin.c:711: error: declaration of index shadows a global declaration
/usr/include/string.h:487: error: shadowed declaration is here
commit d2ef37ebd9
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Dec 7 08:30:30 2018 -0800
elf: Report property change when merging properties
failed to remove the property after reporting it has been removed. This
patch corrects it.
bfd/
PR ld/24721
* elf-properties.c (elf_merge_gnu_property_list): Remove the
property after reporting property removal.
ld/
PR ld/24721
* testsuite/ld-x86-64/x86-64.exp: Run PR ld/24721 tests.
* testsuite/ld-x86-64/pr24721-x32.d: New file.
* testsuite/ld-x86-64/pr24721.d: Likewise.
* testsuite/ld-x86-64/pr24721.map: Likewise.
* testsuite/ld-x86-64/pr24721a.s: Likewise.
* testsuite/ld-x86-64/pr24721b.s: Likewise.
While the skiboot linker script bears some culpability in this PR,
it's also true that the GOT indirect to GOT relative optimisation for
16-bit offsets isn't safe. At least, it isn't safe to remove the GOT
entry based on distance between the GOT pointer and symbol calculated
from the preliminary layout. So this patch removes that optimisation,
and reduces the range allowed for 32-bit and 34-bit offsets.
PR 24704
bfd/
* elf64-ppc.c (R_PPC64_GOT16_DS): Don't set has_gotrel.
(ppc64_elf_edit_toc): Don't remove R_PPC64_GOT16_DS got entries.
Reduce range of offsets allowed for other GOT relocs.
ld/
* testsuite/ld-powerpc/elfv2exe.d: Update.
* testsuite/ld-powerpc/elfv2so.d: Update.
These ilp32 relocations were missing for some reason.
bfd/ChangeLog:
* elfnn-aarch64.c: Enable MOVW_PREL relocs for ELF32.
include/ChangeLog:
* elf/aarch64.h (R_AARCH64_P32_MOVW_PREL_G0): Define.
(R_AARCH64_P32_MOVW_PREL_G0_NC): Define.
(R_AARCH64_P32_MOVW_PREL_G1): Define.
ld/ChangeLog:
* testsuite/ld-aarch64/aarch64-elf.exp: Add emit-relocs-22 and -23.
* testsuite/ld-aarch64/emit-relocs-22.d: New test.
* testsuite/ld-aarch64/emit-relocs-22.s: New test.
* testsuite/ld-aarch64/emit-relocs-23.d: New test.
* testsuite/ld-aarch64/emit-relocs-23.s: New test.
Mention in the description of the `-rpath' LD option the restrictions
the option has with respect to searching link-time dependencies of
shared objects referred in the link. Previously these restrictions were
only documented along with the `-rpath-link' option, which may not be
the place one would consider when looking for the semantics of `-rpath'.
Copy the relevant part of the `-rpath-link' option description then,
splitting the now overlong paragraph into three, for legibility.
ld/
* ld.texi (Options): Also document `-rpath' option restrictions
in the description of the option itself.
If the new GNU property section was being created by the linker
(this will happen only if none of the inputs have any GNU property
section but the command line to the linker forces a bti with
--force-bti), the alignment of the section and hence the program
header of PT_GNU_PROPERTY type was not being set correctly. This
patch fixes this issue.
bfd/ChangeLog:
2019-06-06 Sudakshina Das <sudi.das@arm.com>
* elfxx-aarch64.c (_bfd_aarch64_elf_link_setup_gnu_properties): Set
alignment of the new gnu property section.
ld/ChangeLog:
2019-06-06 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-aarch64/aarch64-elf.exp: Add new tests.
* testsuite/ld-aarch64/property-bti-pac4-a.d: New test.
* testsuite/ld-aarch64/property-bti-pac4-b.d: New test.
* testsuite/ld-aarch64/property-bti-pac4.s: New test.
This changes s12z to use generic.em and genelf.em, which is more
suited to targets that use the generic linker hash table. A tweak or
two to some testsuite predicates then gives a clean testsuite result
on the target.
PR 24596
binutils/
* testsuite/lib/binutils-common.exp (supports_gnu_unique): Add
s12z to targets not supporting this feature.
ld/
* emulparams/m9s12zelf.sh (TEMPLATE_NAME): Set to generic.
(EXTRA_EM_FILE): Define to genelf.
* testsuite/lib/ld-lib.exp (uses_genelf): Add s12z.
Overflow checks were removed for all hi16 relocations except PC-relative
high relocations per PR ld/16720. Remove overflow checks from %pcrel_hi
relocations so that we can correctly handle negative offsets from PC.
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation) <R_MIPS_PCHI16>:
Remove overflow check.
ld/
* testsuite/ld-mips-elf/undefweak-overflow.s: Remove test case
for pcrel_hi/pcrel_lo.
* testsuite/ld-mips-elf/undefweak-overflow.d: Update to match.
* testsuite/ld-mips-elf/reloc-pcrel-r6.s: New test source.
* testsuite/ld-mips-elf/reloc-pcrel-r6.d: New test linker script.
* testsuite/ld-mips-elf/reloc-pcrel-r6.ld: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
PR 24596
* emultempl/pe.em (gld_${EMULATION_NAME}_after_open): Check that
the output is coff before accessing coff tdata.
* emultempl/pep.em (gld_${EMULATION_NAME}_after_open): Likewise.
Force sysv hash style for reliable symbol table layout.
ld/ChangeLog:
* testsuite/ld-aarch64/variant_pcs-now.d: Use --hash-style=sysv.
* testsuite/ld-aarch64/variant_pcs-shared.d: Likewise.
Even though the generic ELF target doesn't handle groups correctly,
this helps avoid a segfault in bfd_elf_set_group_contents seen on
d30v-elf, dlx-elf, pj-elf, and xgate-elf when linking the pr22836
testcase.
PR 24596
bfd/
* linker.c (_bfd_generic_link_output_symbols): Heed BSF_KEEP.
ld/
* emultempl/genelf.em (gld${EMULATION_NAME}_after_open): Set
BFS_KEEP on group signature symbol.
Propagate STO_AARCH64_VARIANT_PCS st_other attribute to the output and
add DT_AARCH64_VARIANT_PCS dynamic tag if necessary.
Mismatching attributes are not diagnosed.
bfd/ChangeLog:
* elfnn-aarch64.c (elfNN_aarch64_merge_symbol_attribute): New function.
(struct elf_aarch64_link_hash_table): Add variant_pcs member.
(elfNN_aarch64_allocate_dynrelocs): Update variant_pcs.
(elfNN_aarch64_size_dynamic_sections): Add DT_AARCH64_VARIANT_PCS.
(elf_backend_merge_symbol_attribute): Define.
ld/ChangeLog:
* testsuite/ld-aarch64/aarch64-elf.exp: Add new tests.
* testsuite/ld-aarch64/variant_pcs-1.s: New asm for tests.
* testsuite/ld-aarch64/variant_pcs-2.s: New asm for tests.
* testsuite/ld-aarch64/variant_pcs-now.d: New test.
* testsuite/ld-aarch64/variant_pcs-r.d: New test.
* testsuite/ld-aarch64/variant_pcs-shared.d: New test.
* testsuite/ld-aarch64/variant_pcs.ld: New linker script for tests.
bfd/
* elf64-ppc.c (ppc64_elf_check_relocs): Set has_gotrel for
R_PPC64_GOT_PCREL34.
(xlate_pcrel_opt): New function.
(ppc64_elf_edit_toc): Handle R_PPC64_GOT_PCREL34.
(ppc64_elf_relocate_section): Edit GOT indirect to GOT relative
for R_PPC64_GOT_PCREL34. Implement R_PPC64_PCREL_OPT optimisation.
ld/
* testsuite/ld-powerpc/pcrelopt.s,
* testsuite/ld-powerpc/pcrelopt.d,
* testsuite/ld-powerpc/pcrelopt.sec: New test.
* testsuite/ld-powerpc/powerpc.exp: Run it.
This patch adds support to the linker for the Linux eBPF architecture.
A minimal testsuite is included.
ld/ChangeLog:
2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com>
* Makefile.am (ALL_64_EMULATION_SOURCES): Add eelf64bpf.c.
* Makefile.in (prefix): Regenerate.
* configure.tgt (targ_extra_ofiles): Add case for bpf-*-* targets.
* emulparams/elf64bpf.sh: New file.
* testsuite/lib/ld-lib.exp (check_gc_sections_available): Add
bpf-*-* to the list of targets not supporting gc-sections.
* testsuite/ld-bpf/bar.s: New file.
* testsuite/ld-bpf/jump-1.d: Likewise.
* testsuite/ld-bpf/foo.s: Likewise.
* testsuite/ld-bpf/call-1.d: Likewise.
* testsuite/ld-bpf/bpf.exp: Likewise.
* testsuite/ld-bpf/baz.s: Likewise.
git commit 6ec6968b1b results in
... error: linker script file '/usr/local/lib64/libgcc_s.so' appears multiple times
collect2: error: ld returned 1 exit status
FAIL: bootstrap
This patch changes things so that an error is given only when a -T
script or the default script is invoked more than once. I'm still a
little nervous that we match script file names, not the entire path.
PR 24576
* ldfile.c (enum script_open_style): New.
(struct script_name_list): New.
(ldfile_open_command_file_1): Take a script_open_style param
rather than booleans. Adjust callers. Only fail when -T or
default -T script is invoked twice.
(ldfile_try_open_bfd): Revert last change.
PR 24576
* ld/ldfile.c: (ldfile_open_command_file_1): Add new parameter -
is_script. If true check that the file has not already been
parsed as a linker script.
(ldfile_open_script_file): New function.
(ldfile_try_open_bfd): Use the new function in place of
ldfile_open_command_line.
* ldmain.c (main): Likewise.
* lexsup.c (parse_args): Use the new function for opening linker
scripts with the -T option.
* ldfile.h (ldfile_open_script_file): Add prototype.
bfd/
* elfxx-mips.c (_bfd_mips_elf_check_relocs): Add NULL pointer
checks. Search the RELA table for n64 relocations.
ld/
* testsuite/ld-mips-elf/pic-reloc-5.d: New test.
* testsuite/ld-mips-elf/pic-reloc-6.d: New test.
* testsuite/ld-mips-elf/pic-reloc-7.d: New test.
* testsuite/ld-mips-elf/pic-reloc-5.s: New test source.
* testsuite/ld-mips-elf/pic-reloc-6.s: New test source.
* testsuite/ld-mips-elf/pic-reloc-7.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Add a new option to get the linker to emit PLTs that use compact
branches instead of delay slot branches.
bfd/
* elfxx-mips.c (LA25_BC): New macro.
(mips_elf_link_hash_table)<compact_branches>: New field.
(STUB_JALRC): New macro.
(mipsr6_o32_exec_plt0_entry_compact): New array.
(mipsr6_n32_exec_plt0_entry_compact): Likewise.
(mipsr6_n64_exec_plt0_entry_compact): Likewise.
(mipsr6_exec_plt_entry_compact): Likewise.
(mips_elf_create_la25_stub): Use BC instead of J for stubs
when compact_branches is true.
(_bfd_mips_elf_finish_dynamic_symbol): Choose the compact
PLT for MIPSR6 with compact_branches. Do not reorder the
compact branches PLT. Switch the lazy stub for MIPSR6
with compact_branches to use JALRC.
(mips_finish_exec_plt): Choose the compact PLT0 for MIPSR6
when compact_branches is true.
(_bfd_mips_elf_compact_branches): New function.
* elfxx-mips.h (_bfd_mips_elf_compact_branches): New prototype.
ld/
* emultempl/mipself.em (compact_branches): New static variable.
(mips_create_output_section_statements): Call
_bfd_mips_elf_compact_branches.
(PARSE_AND_LIST_PROLOGUE): Add OPTION_COMPACT_BRANCHES and
OPTION_NO_COMPACT_BRANCHES.
(PARSE_AND_LIST_LONGOPTS): Add compact-branches,
no-compact-branches.
(PARSE_AND_LIST_OPTIONS): Add --compact-branches,
--no-compact-branches.
(PARSE_AND_LIST_ARGS_CASES): Handle the above.
* ld.texinfo: Document --compact-branches, --no-compact-branches.
* testsuite/ld-mips-elf/pic-and-nonpic-1-r6.dd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-1-r6.nd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-3a-r6.dd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-3a-r6.gd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-1a-r6.s: New test source.
* testsuite/ld-mips-elf/pic-and-nonpic-3a-r6.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
The Cortex-A53 erratum currently has two ways it can resolve the erratum when
using the flag --fix-cortex-a53-843419:
1) If the address is within the range of an ADR instruction it rewrites the ADRP
into an ADR, and those doesn't need the use of a veneer.
2) If the address is not within range, it adds a branch to a veneer which will
execute the final bit of the erratum workaround and branch back to the call
site.
When we do this we always generate the veneers and we always align the size of
the text section to 4KB. This is because we only know which workaround we can
use after all linking has finished and all addresses are known. This means even
though the veneers are not used, we still generate the section and we still
change the size of the input section.
This is problematic for small memory devices as this would require the user to
take about a ~4KB hit in memory even though it's not even used.
Since there's no real way to restart the linking process from the final write
phase this patch solves the issue by allowing the user more control over which
erratum workaround gets used.
Concretely this changes the option --fix-cortex-a53-843419 to take optional
arguments --fix-cortex-a53-843419[=full|adr|adrp]
- full (default): Use both ADRP and ADR workaround. This is equivalent to not
specifying any options and is the default behavior before this
patch.
- adr: Only use the ADR workaround, this will not cause any increase in binary
size but linking will fail if the referenced address is out of range of
an ADR instruction.
- adrp: Use only the ADRP workaround, this will never rewrite your ADRP.
In the cases where the user knows how big their binaries are the `adr` option
would prevent the unneeded overhead.
bfd/ChangeLog:
PR ld/24373
* bfd-in.h (enum erratum_84319_opts): New
(bfd_elf64_aarch64_set_options, bfd_elf32_aarch64_set_options): Change
int to enum erratum_84319_opts.
* bfd-in2.h: Regenerate.
* elfnn-aarch64.c (struct elf_aarch64_link_hash_table): Change
fix_erratum_843419 to use new enum, remove fix_erratum_843419_adr.
(_bfd_aarch64_add_stub_entry_after): Conditionally create erratum stub.
(aarch64_size_one_stub): Conditionally size erratum 843419 stubs.
(_bfd_aarch64_resize_stubs): Amend comment.
(elfNN_aarch64_size_stubs): Don't generate stubs when no workaround
requested.
(bfd_elfNN_aarch64_set_options): Use new fix_erratum_843419 enum.
(_bfd_aarch64_erratum_843419_branch_to_stub): Implement selection of
erratum workaround.
(clear_erratum_843419_entry): Update erratum conditional.
ld/ChangeLog:
PR ld/24373
* emultempl/aarch64elf.em (PARSE_AND_LIST_LONGOPTS): Add optional args
to flags.
* NEWS: Add changes to flag.
(PARSE_AND_LIST_OPTIONS): Update help descriptions.
(PARSE_AND_LIST_ARGS_CASES): Add new options to parser.
* testsuite/ld-aarch64/aarch64-elf.exp: Add new run_dump_tests.
* testsuite/ld-aarch64/erratum843419-adr.d: New test.
* testsuite/ld-aarch64/erratum843419-adrp.d: New test.
* testsuite/ld-aarch64/erratum843419-far-adr.d: New test.
* testsuite/ld-aarch64/erratum843419-far-full.d: New test.
* testsuite/ld-aarch64/erratum843419-far.s: New test.
* testsuite/ld-aarch64/erratum843419-full.d: New test.
* testsuite/ld-aarch64/erratum843419-near.s: New test.
* testsuite/ld-aarch64/erratum843419-no-args.d: New test.
The range check done to transform an absolute call/jump to a pc-relative one is
off-by-one, and that causes this shortening optimization to be missed if the
branch target is right at the range boundary.
In the non-shrinkable case, the range is what is mentioned in the ISA - -4094
bytes in the backward direction, and 4096 bytes in the positive direction.
In the shrinkable case, the forward jump range increases by two bytes (deleted
because of the shortening from call/jmp to rcall/rjmp), and therefore, the
range is -4094 in the reverse, and 4098 in the positive direction.
Fix the ranges for !shrinkable and shrinkable cases, and add a test caes to
ensure jumps to max forward and backward ranges get relaxed to rjmp.
The current code to compute relative distance in the wrap around case does not
handle the edge case of the target (after adjusting for implicit PC increment)
being exactly half of the wrap around distance. This patch fixes that and adds a
testcase.
The range for a forward relative jump call is 4096 bytes ((2 * 2047) + (2 bytes
for the implicit PC increment)). If the target of the jump is at a distance of
4098 bytes, it is out of range for a forward jump - however, a backward jump can
still reach that address if pmem-wrap-around is 8192.
Assume address 0 has rjmp to address 4098. With a wrap around of 8192 and
*without* adjusting for the implicit PC increment of 2 bytes, rjmp .-4096 will
jump to address 4096 (wrap around at 8192 and decreasing addresses from then
on). Adjusting 2 bytes for the implicit PC increment, the actual target is 4098.
avr_relative_distance_considering_wrap_around though, does the wrap around only
if the passed in distance is less than half of the wrap around distance. In this
case, it is exactly equal to half (original distance 4098, adjusted distance of
4096 and wraparound of 8192), and the bypassed wrap around causes the reloc
overflow error.
Fix by wrapping around even if adjusted distance is equal to half of wrap around
distance.
On IRIX 5, every global symbol that is not explicitly labelled as
being a function is assumed to be an object. There is no reason
why IRIX behaviour should extend to all MIPS targets, so limit this
to only IRIX targets.
gas/
PR 14798
* config/tc-mips.c (s_mips_globl): Only treat symbols that are
not explicitly labelled as BSF_OBJECTs for IRIX targets.
* testsuite/gas/mips/pr14798.s: New test source.
* testsuite/gas/mips/pr14798-irix.d: New test.
* testsuite/gas/mips/pr14798.d: Likewise.
* testsuite/gas/mips/mips.exp: Run the new tests.
binutils/
PR 14798
* testsuite/binutils-all/readelf.ss-mips: Update reference output.
* testsuite/binutils-all/readelf.ss-tmips: Likewise.
ld/
PR 14798
* testsuite/ld-mips-elf/reloc-6a.s: Specify .text section for
global code symbols.
* testsuite/ld-mips-elf/reloc-6b.s: Likewise.
As the existing comment said: "a common ought to be overridden by a
def in a -flto object". This patch makes the code actually do that,
rather than allowing a normal object file common to override a -flto
defined symbol.
PR 24567
* plugin.c (plugin_notice): Do not let a common symbol override
a non-common definition in IR.
This fixes the recently added ld-elf/pr24511 test failure on pj-elf.
Incidentally, pj-elf has failed its gas "pj" test since 2005-12-22
(git commit 54758c3e39). I think that makes the target ripe for
obsolescence.
bfd/
* elf32-pj.c (pj_elf_reloc): Don't report undefined weak as an error.
ld/
* testsuite/ld-undefined/weak-undef.exp: Don't xfail pj.
m32c_md_end attempted to pad out a code section with nops, but this
was just plain wrong in many ways:
- The padding didn't happen at all if the last section emitted wasn't
a code section.
- The padding went to the wrong place if subsections were used, and
the last subseg used wasn't the highest numbered subseg.
- Padding wasn't added to all code sections.
- If the last section was empty, it was padded to 4 bytes.
- The padding didn't go to a 4-byte alignment boundary, instead it
effectively made the last instruction 4 bytes in size.
- The padding didn't take into account that code sections may have
contents other than machine instructions.
So, rip it out and handle nop padding properly, also fixing .align
.balign/.p2align in the middle of code.
gas/
* config/tc-m32c.c (insn_size): Delete static var.
(md_begin): Don't set it.
(m32c_md_end): Delete.
(md_assemble): Add insn_size auto var.
* config/tc-m32c.h (md_end): Don't define.
(m32c_md_end): Delete.
(NOP_OPCODE, HANDLE_ALIGN, MAX_MEM_FOR_RS_ALIGN_CODE): Define.
* testsuite/gas/all/align.d: Remove m32c from notarget list.
* testsuite/gas/all/incbin.d: Likewise.
* testsuite/gas/elf/dwarf2-11.d: Likewise.
* testsuite/gas/macros/semi.d: Likewise.
* testsuite/gas/all/gas.exp (do_comment): Similarly.
ld/
* testsuite/ld-scripts/fill.d: Don't xfail m32c
* testsuite/ld-scripts/fill16.d: Likewise.
This patch restricts the section names matched in coff_section_type,
a function that translates section names to symbol type, and arranges
to translate section flags to symbol type before looking at names.
The latter change resulted in various test failures due to improper
section flags being used in tests, and by the plugin support, so fix
that too.
The new test fails on many ELF targets that lack .init/fini_array
in their scripts. I've just xfailed those. pru-elf oddly defines
__init_array_begin rather than __init_array_start. I've left that
target as a FAIL, and pj-elf too which reports an error for undefined
weak symbols.
bfd/
PR 24511
* syms.c (coff_section_type): Only allow '.', '$' and numeric
following the standard section names.
(bfd_decode_symclass): Prioritize section flag tests in
decode_section_type before name tests in coff_section_type.
* plugin.c (bfd_plugin_canonicalize_symtab): Init fake_section
and fake_common_section using BFD_FAKE_SECTION. Use "fake" as
their names and choose standard .text section flags for
fake_section.
ld/
PR 24511
* testsuite/ld-elf/pr14156a.d: Allow for .init/.fini being a
data section on hppa64.
* testsuite/ld-elf/pr14156b.d: Likewise.
* testsuite/ld-scripts/pr18963.t: Map standard sections to set
output section flags.
* testsuite/ld-scripts/sane1.t: Likewise.
* testsuite/ld-elf/init-fini-arrays.s: Reference __init_array_start
and __fini_array_start. Define __start et al.
* testsuite/ld-elf/pr24511.d: New test.
Fixes the following error:
ld.pod around line 568: Expected '=item *'
POD document had syntax errors at /usr/bin/pod2man line 71.
* ld.texi (How GNU properties are merged): Avoid pod2man error.
Correct example.
When undefined non-weak references in IR objects are optimized out
by LTO, we can have weak dynamic referencs to symbols marked with
bfd_link_hash_undefined. We shouldn't complain such undefined weak
dynamic references.
bfd/
PR ld/24486
* elflink.c (elf_link_output_extsym): Don't complain undefined
weak dynamic reference.
ld/
PR ld/24486
* testsuite/ld-plugin/lto.exp: Run PR ld/24486 tests.
* testsuite/ld-plugin/pr24486a.c: New file.
* testsuite/ld-plugin/pr24486b.c: Likewise.
* testsuite/ld-plugin/pr24486c.c: Likewise.
When a wrapper symbol, __wrap_FOO, is defined in IR, its resolution
should be LDPR_PREVAILING_DEF, not PREVAILING_DEF_IRONLY, since LTO
doesn't know that __wrap_FOO provides definition of FOO. And resolution
of FOO should be LDPR_RESOLVED_IR since it is resolved by __wrap_FOO in
IR.
PR ld/24406
* ld.texi: Remove LTO warning from --wrap.
* plugin.c (get_symbols): Update resolution for wrapper and
wrapped symbols.
* testsuite/ld-plugin/lto.exp: Run ld/24406 tests.
* testsuite/ld-plugin/pr24406-1.c: New file.
* testsuite/ld-plugin/pr24406-2a.c: Likewise.
* testsuite/ld-plugin/pr24406-2b.c: Likewise.
This patch aims to improve the definitions of BTI and PAC based PLTs.
The following changes are made:
* PLT0 does not need PAC instructions since the PLTGOT[2] (and PLTGOT[1])
are readonly so they cannot be corrupted at runtime. Thus both PAC plt0
and BTI+PAC plt0 are removed and we can use basic plt0 and BTI plt0
instead, respectively.
* We can remove the extra padding nops when we add the new bti instructions.
BTI plt0 and BTI TLSDESC plt are updated.
* For better performance PLTn could be padded to 24bytes. Both BTI pltn and
PAC pltn are updated.
*** bfd/ChangeLog ***
2019-04-25 Sudakshina Das <sudi.das@arm.com>
* elfnn-aarch64.c (PLT_BTI_ENTRY_SIZE): Remove.
(PLT_BTI_TLSDESC_ENTRY_SIZE): Remove.
(PLT_PAC_ENTRY_SIZE, PLT_BTI_PAC_ENTRY_SIZE): Remove.
(PLT_BTI_SMALL_ENTRY_SIZE, PLT_PAC_SMALL_ENTRY_SIZE): Update.
(elfNN_aarch64_small_plt0_pac_entry): Remove.
(elfNN_aarch64_small_plt0_bti_pac_entry): Remove.
(elfNN_aarch64_small_plt0_bti_entry): Update.
(elfNN_aarch64_small_plt_bti_entry): Update.
(elfNN_aarch64_small_plt_pac_entry): Update.
(elfNN_aarch64_tlsdesc_small_plt_bti_entry): Update.
(setup_plt_values): Setup new entries.
(elfNN_aarch64_finish_dynamic_sections): Remove size change.
(elfNN_aarch64_plt_sym_val): Likewise.
*** ld/ChangeLog ***
2019-04-25 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-aarch64/bti-pac-plt-1.d: Update.
* testsuite/ld-aarch64/bti-pac-plt-2.d: Update.
* testsuite/ld-aarch64/bti-plt-1.d: Update.
* testsuite/ld-aarch64/bti-plt-3.d: Update.
* testsuite/ld-aarch64/bti-plt-5.d: Update.
* testsuite/ld-aarch64/pac-plt-1.d: Update.
* testsuite/ld-aarch64/pac-plt-2.d: Update.
The ld testsuite includes numerous tests that depend on being able to
compile and link programs with the C compiler. Some of these tests
use [which $CC] to check for the presence of the compiler before
proceeding with the test, but run_ld_link_exec_tests and run_cc_link_tests
give ERRORs if compilation fails. Also, even if $CC is defined and present,
it may not be usable due to missing libraries, etc.
This patch adds a new procedure check_compiler_available that attempts
to build an empty program and caches the result. Uses of [which $CC]
are replaced with calls to this procedure, and run_ld_link_exec_tests
and run_cc_link_tests now also guard attempts to use $CC.
2019-04-24 Sandra Loosemore <sandra@codesourcery.com>
ld/
* testsuite/config/default.exp: Use [check_compiler_available]
instead of [which $CC].
* testsuite/ld-auto-import/auto-import.exp: Likewise.
* testsuite/ld-cygwin/exe-export.exp: Likewise.
* testsuite/ld-elf/audit.exp: Likewise.
* testsuite/ld-elf/compress.exp: Likewise.
* testsuite/ld-elf/dwarf.exp: Likewise.
* testsuite/ld-elf/elf.exp: Likewise.
* testsuite/ld-elf/indirect.exp: Likewise.
* testsuite/ld-elf/linux-x86.exp: Likewise.
* testsuite/ld-elf/shared.exp: Likewise.
* testsuite/ld-elf/tls.exp: Likewise.
* testsuite/ld-elf/wrap.exp: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Likewise.
* testsuite/ld-elfvers/vers.exp: Likewise.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-i386/i386.exp: Likewise.
* testsuite/ld-i386/no-plt.exp: Likewise.
* testsuite/ld-i386/tls.exp: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Likewise.
* testsuite/ld-mn10300/mn10300.exp: Likewise.
* testsuite/ld-pe/pe-compile.exp: Likewise.
* testsuite/ld-pe/pe-run.exp: Likewise.
* testsuite/ld-pe/pe-run2.exp: Likewise.
* testsuite/ld-pie/pie.exp: Likewise.
* testsuite/ld-plugin/lto.exp: Likewise.
* testsuite/ld-plugin/plugin.exp: Likewise.
* testsuite/ld-scripts/crossref.exp: Likewise.
* testsuite/ld-sh/sh.exp: Likewise.
* testsuite/ld-shared/shared.exp: Likewise.
* testsuite/ld-size/size.exp: Likewise.
* testsuite/ld-srec/srec.exp: Likewise.
* testsuite/ld-undefined/undefined.exp: Likewise.
* testsuite/ld-unique/unique.exp: Likewise.
* testsuite/ld-x86-64/mpx.exp: Likewise.
* testsuite/ld-x86-64/no-plt.exp: Likewise.
* testsuite/ld-x86-64/tls.exp: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Call
check_compiler_available before trying to use the compiler.
(run_cc_link_tests): Likewise.
(check_compiler_available): New. Use it instead of [which $CC].
Commit c40e31a121 broke --enable-dependency-tracking=no.
* Makefile.am (GENDEPDIR): New var, used..
(GENSCRIPTS): ..here.
* Makefile.in: Regenerate.
* genscripts.sh: Test for $DEPDIR set before every use.
This tidies the remaining --no-print-map-discarded fails. h8300-elf
warns on a section without flags, and s12z doesn't support
--gc-sections.
bfd/
* elf32-s12z.c (elf_backend_can_gc_sections): Don't define
ld/
* testsuite/ld-gc/skip-map-discarded.s: Add section attributes.
* testsuite/lib/ld-lib.exp (check_gc_sections_available): Add
s12z to list of targets not supporting --gc-sections.
ld * config/tc-msp430.c (msp430_make_init_symbols): Define __crt0_init_bss
symbol when .lower.bss or .either.bss sections exist.
Define __crt0_movedata when .lower.data or .either.data sections exist.
* testsuite/gas/msp430/either-data-bss-sym.d: New test.
* testsuite/gas/msp430/low-data-bss-sym.d: New test.
* testsuite/gas/msp430/either-data-bss-sym.s: New test source.
* testsuite/gas/msp430/low-data-bss-sym.s: New test source.
* testsuite/gas/msp430/msp430.exp: Run new tests.
Enable large code model when running -mdata-region={upper,either}
tests.
Some of these tests were excluded for ns32k-netbsd, exclude for all
ns32k instead.
binutils/
* testsuite/binutils-all/copy-2.d: Don't run for ns32k-*-*.
* testsuite/binutils-all/copy-3.d: Likewise.
gas/
* testsuite/gas/all/gas.exp: Remove ns32k xfails.
* testsuite/gas/all/weakref1u.d: Don't run for ns32k-*-*.
ld/
* testsuite/ld-scripts/pr20302.d: Don't run for ns32k-*-*.
* testsuite/ld-scripts/section-match-1.d: Likewise.
* testsuite/ld-undefined/require-defined.exp: Likewise.
s patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This patch adds the BFCSEL instruction. It also adds a local relocation with a new bfd_reloc_code_real enum.
ChangeLog entries are as follows:
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_THUMB_PCREL_BFCSEL): New relocation.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (T16_32_TAB): New entriy for bfcsel.
(do_t_v8_1_branch): New switch case for bfcsel.
(toU): Define.
(insns): New instruction for bfcsel.
(md_pcrel_from_section): New switch case
for BFD_RELOC_THUMB_PCREL_BFCSEL.
(md_appdy_fix): Likewise
(tc_gen_reloc): Likewise.
* testsuite/gas/arm/armv8_1-m-bfcsel.d: New.
* testsuite/gas/arm/armv8_1-m-bfcsel.s: New.
*** ld/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-arm/bfcsel.s: New.
* testsuite/ld-arm/bfcsel.d: New.
* testsuite/ld-arm/arm-elf.exp: Add above test.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (thumb32_opcodes): New instruction bfcsel.
(print_insn_thumb32): Edit the switch case for %Z.
This patch is part of a series of patches to add support for Armv8.1-M Mainline
instructions to binutils.
This patch adds the BFL instruction.
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (T16_32_TAB): New entrie for bfl.
(do_t_v8_1_branch): New switch case for bfl.
(insns): New instruction for bfl.
* testsuite/gas/arm/armv8_1-m-bfl.d: New.
* testsuite/gas/arm/armv8_1-m-bfl.s: New.
* testsuite/gas/arm/armv8_1-m-bfl-bad.s: New.
* testsuite/gas/arm/armv8_1-m-bfl-bad.d: New.
* testsuite/gas/arm/armv8_1-m-bfl-bad.l: New.
* testsuite/gas/arm/armv8_1-m-bfl-rel.d: New.
* testsuite/gas/arm/armv8_1-m-bfl-rel.s: New.
*** ld/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-arm/bfl.s: New.
* testsuite/ld-arm/bfl.d: New.
* testsuite/ld-arm/arm-elf.exp: Add above test.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (thumb32_opcodes): New instruction bfl.
This patch is part of a series of patches to add support for Armv8.1-M Mainline
instructions to binutils.
This patch adds the BF instruction.
ChangeLog entries are as follows:
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (T16_32_TAB): New entries for bf.
(do_t_branch_future): New.
(insns): New instruction for bf.
* testsuite/gas/arm/armv8_1-m-bf.d: New.
* testsuite/gas/arm/armv8_1-m-bf.s: New.
* testsuite/gas/arm/armv8_1-m-bf-bad.s: New.
* testsuite/gas/arm/armv8_1-m-bf-bad.l: New.
* testsuite/gas/arm/armv8_1-m-bf-bad.d: New.
* testsuite/gas/arm/armv8_1-m-bf-rel.d: New.
* testsuite/gas/arm/armv8_1-m-bf-rel.s: New.
*** ld/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-arm/bf.s: New.
* testsuite/ld-arm/bf.d: New.
* testsuite/ld-arm/arm-elf.exp: Add above test.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (thumb32_opcodes): New instructions for bf.
The patch is straightforward, it does the following:
- support the new Tag_CPU_arch build attribute value, ie.:
+ declare the new value
+ update all the asserts forcing logic to be reviewed for new
architectures
+ create a corresponding bfd_mach_arm_8_1M_MAIN enumerator in bfd and
add mapping from Tag_CPU_arch to it
+ teach readelf about new Tag_CPU_arch value
- declare armv8.1-m.main as a supported architecture value
- define Armv8.1-M Mainline in terms of feature bits available
- tell objdump mapping from bfd_mach_arm_8_1M_MAIN enumerator to feature
bits available
- update architecture-specific logic in gas and bfd guarded by the
asserts mentioned above.
- tests for all the above
ChangeLog entries are as follows:
*** bfd/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* archures.c (bfd_mach_arm_8_1M_MAIN): Define.
* bfd-in2.h: Regenerate.
* cpu-arm.c (arch_info_struct): Add entry for Armv8.1-M Mainline.
* elf32-arm.c (using_thumb_only): Return true for Armv8.1-M Mainline
and update assert.
(using_thumb2): Likewise.
(using_thumb2_bl): Update assert.
(arch_has_arm_nop): Likewise.
(bfd_arm_get_mach_from_attributes): Add case for Armv8.1-M Mainline.
(tag_cpu_arch_combine): Add logic for Armv8.1-M Mainline merging.
*** binutils/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* readelf.c (arm_attr_tag_CPU_arch): Add entry for Armv8.1-M Mainline.
*** gas/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (cpu_arch_ver): Add entry for Armv8.1-M Mainline
Tag_CPU_arch build attribute value. Reindent.
(get_aeabi_cpu_arch_from_fset): Update assert.
(aeabi_set_public_attributes): Update assert for Tag_DIV_use logic.
* testsuite/gas/arm/attr-march-armv8_1-m.main.d: New test.
*** include/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* elf/arm.h (TAG_CPU_ARCH_V8_1M_MAIN): new macro.
(MAX_TAG_CPU_ARCH): Set value to above macro.
* opcode/arm.h (ARM_EXT2_V8_1M_MAIN): New macro.
(ARM_AEXT_V8_1M_MAIN): Likewise.
(ARM_AEXT2_V8_1M_MAIN): Likewise.
(ARM_ARCH_V8_1M_MAIN): Likewise.
*** ld/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* testsuite/ld-arm/attr-merge-13.attr: New test.
* testsuite/ld-arm/attr-merge-13a.s: New test.
* testsuite/ld-arm/attr-merge-13b.s: New test.
*** opcodes/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-dis.c (select_arm_features): Add logic for Armv8.1-M Mainline.
It is no longer true that autoconf/automake cannot substitute vars
with embedded new-lines.
* configure.ac (TDIRS): Build up tdirs in this variable and
AC_SUBST, also using AM_SUBST_NOTMAKE.
* configure: Regenerate.
* Makefile.am (DISTCLEANFILES): Remove tdirs.
* Makefile.in: Regenerate.
Add a new option to disable the listing of discarded sections
in map file output. The use case stems from a large application
built with -ffunction-sections --gc-sections where the list of
discarded sections blows up the map file output. The default
behaviour remains to print discarded sections, but the new option
allows us to disable it.
ld/
* NEWS: Mention new option --no-print-map-discarded.
* ld.h (ld_config_type) <print_map_discarded>: New field.
* ldlang.c (lang_map): Conditionally output discarded sections
in map files based on configuration option.
* ldlex.h (option_values) <OPTION_PRINT_MAP_DISCARDED,
OPTION_NO_PRINT_MAP_DISCARDED>: New.
* ldmain.c (main): Enabled print_map_discarded by default.
* lexsup.c (ld_options): Add new command-line options.
(parse_args) <OPTION_NO_PRINT_MAP_DISCARDED,
OPTION_PRINT_MAP_DISCARDED>: New cases.
* ld.texi: Document new options.
* testsuite/ld-gc/gc.exp: Add new test.
* testsuite/ld-gc/skip-map-discarded.s: New file.
* testsuite/ld-gc/skip-map-discarded.d: New file.
* testsuite/ld-gc/skip-map-discarded.map: New file.
Add -static-pie tests for DT_INIT_ARRAY, DT_FINI_ARRAY, DT_PREINIT_ARRAY
and IFUNC.
* testsuite/config/default.exp (STATIC_PIE_LDFLAGS): New. Set
to "-static-pie" if target compiler supports it.
* testsuite/ld-elf/elf.exp: Run -static-pie tests if
$STATIC_PIE_LDFLAGS isn't empty.
* testsuite/ld-ifunc/ifunc.exp: Likewise.
When using DF_BIND_NOW on AArch64 we don't reserve the GOT slot for a TLSDESC,
but we still emitted DT_TLSDESC_GOT and DT_TLSDESC_PLT. This caused random
memory corruption as the "special" value of (bfd_vma)-1 would be set for
dt_tlsdesc_got.
Since we don't have a value of dt_tlsdesc_got I also don't emit DT_TLSDESC_PLT
now becuase it would point to an incomplete PLT. To be able to write the PLT
entry DT_TLSDESC_GOT is needed and since we don't have one we can't write the
PLT entry either.
It is my understanding that GLIBC doesn't need these two entries when not lazy
loading. Conversely AArch32 does not reserve neither the GOT not the PLT slot
when doing DF_BIND_NOW.
AArch32 does not need these checks because these values are initialized to 0
and so the if (...) checks don't pass, but on AArch64 these are initialized
to (bfd_vma)-1 and thus we need some extra checks.
bfd/ChangeLog:
PR ld/24302
* elfnn-aarch64.c (elfNN_aarch64_size_dynamic_sections): Don't emit
DT_TLSDESC_GOT and DT_TLSDESC_PLT when DF_BIND_NOW.
(elfNN_aarch64_finish_dynamic_sections): Don't write PLT if DF_BIND_NOW.
ld/ChangeLog:
PR ld/24302
* testsuite/ld-aarch64/aarch64-elf.exp: Add new test.
* testsuite/ld-aarch64/tls-relax-gdesc-le-now.d: New test.
__rel[a]_iplt_start and __rel[a]_iplt_end are defined to handle IFUNC in
static executables. For PIE, since IFUNC is handled as the part of the
normal dynamic relocation processing, there is no need to define these
symbols in PIE.
* scripttempl/elf.sc (CREATE_PIC): New. Set for CREATE_SHLIB or
CREATE_PIE.
(__rel_iplt_start): Don't define for CREATE_PIC.
(__rel_iplt_end): Likewise.
(__rela_iplt_start): Likewise.
(__rela_iplt_end): Likewise.
This fixes the csky-elf ld-elf/pr21884 and ld-unique/pr21529 failures,
by disabling branch stubs for binary (and other non-csky) output.
The csky-linux target gets branch stubs off by default because
presumably there are reasons why branch stubs were disabled, but
rather than killing the support completely it can be enabled by
--branch-stub.
* emultempl/cskyelf.em (csk_elf_before_parse): New function,
setting use_branch_stub false for linux.
(csky_elf_create_output_section_statements): Do emit this
function and all others in the file for linux, plus the branch
option control. Disable branch stubs when non-ELF.
In looking at the csky-elf vs. csky-linux differences, the first thing
I compared was csky_elf.sh and cskyelf_linux.sh. Those files are
mostly the same but besides the real differences, annoyingly have some
lines ordered differently. It's better in such cases to have one file
source the other, making differences plain. This patch does that for
csky and microblaze, removes an unused variable defined in a few
places, and fixes ld makefile dependencies.
* Makefile.am (eskyelf.c, eskyelf_linux.c): Depend on cskyelf.em.
(ecskyelf_linux.c): Depend on cskyelf.sh.
(eelf32microblazeel.c): Depend on elf32microblaze.sh.
* Makefile.in: Regenerate.
* emulparams/cskyelf.sh: Comment regarding cskelf_linux.sh.
(PAGE_SIZE): Don't define.
* emulparams/cskyelf_linux.sh: Source sckyelf.sh, leaving just
the differing variable defs/undefs.
* emulparams/elf32mcore.sh (PAGE_SIZE): Don't define.
* emulparams/elf32microblaze.sh: Comment re. elf32microblazeel.sh.
(OUTPUT_FORMAT): Use BIG_OUTPUT_FORMAT.
(PAGE_SIZE): Don't define.
* emulparams/elf32microblazeel.sh: Source elf32microblaze.sh,
leaving just the differing OUTPUT_FORMAT.
When an instruction has operands, the PowerPC disassembler prints
spaces after the opcode so as to line up operands. If the operands
are all optional and all default value, then no operands are printed,
leaving trailing spaces. This patch fixes that.
opcodes/
* ppc-dis.c (print_insn_powerpc): Delay printing spaces after
opcode until first operand is output.
gas/
* testsuite/gas/ppc/476.d: Remove trailing spaces.
* testsuite/gas/ppc/a2.d: Likewise.
* testsuite/gas/ppc/booke.d: Likewise.
* testsuite/gas/ppc/booke_xcoff.d: Likewise.
* testsuite/gas/ppc/e500.d: Likewise.
* testsuite/gas/ppc/e500mc.d: Likewise.
* testsuite/gas/ppc/e6500.d: Likewise.
* testsuite/gas/ppc/htm.d: Likewise.
* testsuite/gas/ppc/power6.d: Likewise.
* testsuite/gas/ppc/power8.d: Likewise.
* testsuite/gas/ppc/power9.d: Likewise.
* testsuite/gas/ppc/vle.d: Likewise.
ld/
* testsuite/ld-powerpc/tlsexe32.d: Remove trailing spaces.
* testsuite/ld-powerpc/tlsopt5.d: Likewise.
* testsuite/ld-powerpc/tlsopt5_32.d: Likewise.
Let's hope no one has section names starting with '/' in scripts. If
they do, this change to fix parsing of '/' in expressiongs will break
their project.
PR 24411
ldlex.l (SYMBOLNAMECHAR1): Don't match '/'.
(<EXPRESSION>"/DISCARD/"): New.
Underscore was specified twice in all these patterns, and backslash
twice in some. Flex warned about the $SYSROOT rule, which is covered
by earlier rules: "ldlex.l:386: warning, rule cannot be matched".
* ldlex.l: Formatting.
(CMDFILENAMECHAR, CMDFILENAMECHAR1): Delete.
(FILENAMECHAR1, SYMBOLNAMECHAR1, FILENAMECHAR, WILDCHAR),
(NOCFILENAMECHAR): Remove duplicate chars. Reorder.
(SYMBOLCHARN): Likewise. Rename to SYMBOLNAMECHAR.
(<INPUTLIST>"$SYSROOT"..): Delete rule.
shrink_dynamic_reloc_sections must remove PLT entry that was created for
an undefined weak symbol in the presence of --export-dynamic option when
relaxation coalesces literals pointing to that symbol. This fixes the
following assertion:
ld: BFD (GNU Binutils) 2.31.1 internal error, aborting at
elf32-xtensa.c:3292 in elf_xtensa_finish_dynamic_sections
2019-03-29 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* elf32-xtensa.c (shrink_dynamic_reloc_sections): Add
info->export_dynamic to the conditional.
ld/
* testsuite/ld-xtensa/relax-undef-weak-pie-export-dynamic.d: New
test definition.
* testsuite/ld-xtensa/xtensa.exp
(relax-undef-weak-pie-export-dynamic): Add new test.
ld/ChangeLog:
2019-02-26 Martin Liska <mliska@suse.cz>
* plugin.c (get_symbols): Add lto_kind_str, lto_resolution_str,
lto_visibility_str and use then to inform about plugin-symbols.
* testsuite/ld-plugin/plugin-12.d: Adjust expected pattern.
Similar to the AArch64 patches the Arm disassembler has the same issues with
out of order sections but also a few short comings.
For one thing there are multiple code blocks to determine mapping symbols, and
they all work slightly different, and neither fully correct. The first thing
this patch does is centralise the mapping symbols search into one function
mapping_symbol_for_insn. This function is then updated to perform a search in
a similar way as AArch64.
Their used to be a value has_mapping_symbols which was used to determine the
default disassembly for objects that have no mapping symbols. The problem with
the approach was that it was determining this value in the same loop that needed
it, which is why this field could take on the states -1, 0, 1 where -1 means
"don't know". However this means that until you actually find a mapping symbol
or reach the end of the disassembly glob, you don't know if you did the right
action or not, and if you didn't you can't correct it anymore.
This is why the two jump-reloc-veneers-* testcases end up disassembling some
insn as data when they shouldn't.
Out of order here refers to an object file where sections are not listed in a
monotonic increasing VMA order.
The ELF ABI for Arm [1] specifies the following for mapping symbols:
1) A text section must always have a corresponding mapping symbol at it's
start.
2) Data sections do not require any mapping symbols.
3) The range of a mapping symbol extends from the address it starts on up to
the next mapping symbol (exclusive) or section end (inclusive).
However there is no defined order between a symbol and it's corresponding
mapping symbol in the symbol table. This means that while in general we look
up for a corresponding mapping symbol, we have to make at least one check of
the symbol below the address being disassembled.
When disassembling different PCs within the same section, the search for mapping
symbol can be cached somewhat. We know that the mapping symbol corresponding to
the current PC is either the previous one used, or one at the same address as
the current PC.
However this optimization and mapping symbol search must stop as soon as we
reach the end or start of the section. Furthermore if we're only disassembling
a part of a section, the search is a allowed to search further than the current
chunk, but is not allowed to search past it (The mapping symbol if there, must
be at the same address, so in practice we usually stop at PC+4).
lastly, since only data sections don't require a mapping symbol the default
mapping type should be DATA and not INSN as previously defined, however if the
binary has had all its symbols stripped than this isn't very useful. To fix
this we determine the default based on the section flags. This will allow the
disassembler to be more useful on stripped binaries. If there is no section
than we assume you to be disassembling INSN.
[1] https://developer.arm.com/docs/ihi0044/latest/elf-for-the-arm-architecture-abi-2018q4-documentation#aaelf32-table4-7
binutils/ChangeLog:
* testsuite/binutils-all/arm/in-order-all.d: New test.
* testsuite/binutils-all/arm/in-order.d: New test.
* testsuite/binutils-all/arm/objdump.exp: Support .d tests.
* testsuite/binutils-all/arm/out-of-order-all.d: New test.
* testsuite/binutils-all/arm/out-of-order.T: New test.
* testsuite/binutils-all/arm/out-of-order.d: New test.
* testsuite/binutils-all/arm/out-of-order.s: New test.
ld/ChangeLog:
* testsuite/ld-arm/jump-reloc-veneers-cond-long.d: Update disassembly.
* testsuite/ld-arm/jump-reloc-veneers-long.d: Update disassembly.
opcodes/ChangeLog:
* arm-dis.c (struct arm_private_data): Remove has_mapping_symbols.
(mapping_symbol_for_insn): Implement new algorithm.
(print_insn): Remove duplicate code.
The AArch64 linker option to turn on BTI (--force-bti) warns in case there are
input objects which have a missing GNU NOTE section for BTI. This patch is trying
to improve the warnings that come out.
In order to do so, I propose adding a new argument to elf_merge_gnu_properties
and the backend function merge_gnu_properties. This new argument makes sure
that we now pass both the objects along with the properties to which they
belong to. The x86 backend function has also been updated to match this
change.
*** bfd/ChangeLog ***
2019-03-21 Sudakshina Das <sudi.das@arm.com>
* elf-bfd.h (struct elf_backend_data): Add argument to
merge_gnu_properties.
* elf-properties.c (elf_merge_gnu_properties): Add argument to
itself and while calling bed->merge_gnu_properties.
(elf_merge_gnu_property_list): Update the calls for
elf_merge_gnu_properties.
* elfnn-aarch64.c (elfNN_aarch64_merge_gnu_properties): Update handling
of --force-bti warning and add argument.
* elfxx-aarch64.c (_bfd_aarch64_elf_link_setup_gnu_properties): Add
warning.
* elfxx-x86.c (_bfd_x86_elf_merge_gnu_properties): Add argument.
* elfxx-x86.h (_bfd_x86_elf_merge_gnu_properties): Likewise in
declaration.
*** ld/ChangeLog ***
2019-03-21 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-aarch64/aarch64-elf.exp: Add new test.
* testsuite/ld-aarch64/bti-plt-1.s: Add .ifdef for PAC note section.
* testsuite/ld-aarch64/bti-plt-6.d: Update warning.
* testsuite/ld-aarch64/bti-plt-7.d: Likewise.
* testsuite/ld-aarch64/bti-warn.d: New test.
The special case for .init and .fini in update_wild_statements is
ineffective for .init or .fini wildcards inside other output sections.
The special case needs to be on the wildcard, not the output section.
This patch is belt and braces, both fixing update_wild_statements and
the scripts.
* scripttempl/alpha.sc, * scripttempl/armbpabi.sc,
* scripttempl/crisaout.sc, * scripttempl/elf32cr16.sc,
* scripttempl/elf32crx.sc, * scripttempl/elf32xc16x.sc,
* scripttempl/elf32xc16xl.sc, * scripttempl/elf32xc16xs.sc,
* scripttempl/elf64hppa.sc, * scripttempl/elf_chaos.sc,
* scripttempl/elfarc.sc, * scripttempl/elfarcv2.sc,
* scripttempl/elfd30v.sc, * scripttempl/elfm68hc11.sc,
* scripttempl/elfm68hc12.sc, * scripttempl/elfm9s12z.sc,
* scripttempl/elfmicroblaze.sc, * scripttempl/elfxgate.sc,
* scripttempl/elfxtensa.sc, * scripttempl/epiphany_4x4.sc,
* scripttempl/ft32.sc, * scripttempl/i386beos.sc,
* scripttempl/iq2000.sc, * scripttempl/mcorepe.sc,
* scripttempl/mep.sc, * scripttempl/mips.sc, * scripttempl/moxie.sc,
* scripttempl/pe.sc, * scripttempl/pep.sc, * scripttempl/ppcpe.sc,
* scripttempl/tic4xcoff.sc, * scripttempl/tic80coff.sc,
* scripttempl/v850.sc, * scripttempl/v850_rh850.sc,
* scripttempl/visium.sc, * scripttempl/xstormy16.sc: Add KEEP and
SORT_NONE to .init and .fini wildcards.
* scripttempl/elf32xc16x.sc,
* scripttempl/elf32xc16xl.sc,
* scripttempl/elf32xc16xs.sc: Add .fini wildcard.
* scripttempl/elf_chaos.sc: Add .init output section.
* scripttempl/elfd30v.sc: Remove duplicate .init.
* scripttempl/elfm68hc11.sc, * scripttempl/elfm68hc12.sc,
* scripttempl/elfm9s12z.sc, * scripttempl/elfxgate.sc: Remove
duplicate .init, and add .fini wildcard.
* scripttempl/ppcpe.sc (INIT, FINI): Delete.
* ldlang.c (update_wild_statements): Special case .init and
.fini in the wildcard, not the output section.
A number of the fails are due to ld supporting the creation of shared
libraries but not allowing linking against them without using an
option like -Bdynamic.
FAIL: Symbol export class test (final shared object)
FAIL: PROVIDE_HIDDEN test 4
FAIL: PROVIDE_HIDDEN test 6
FAIL: PROVIDE_HIDDEN test 10
FAIL: PROVIDE_HIDDEN test 12
FAIL: Build pr22471b.so
FAIL: Build pr22649-2b.so
FAIL: Build pr22649-2d.so
FAIL: PR ld/20828 dynamic symbols with section GC (plain)
FAIL: PR ld/20828 dynamic symbols with section GC (version script)
FAIL: PR ld/20828 dynamic symbols with section GC (versioned)
FAIL: PR ld/21233 dynamic symbols with section GC (--undefined)
FAIL: PR ld/21233 dynamic symbols with section GC (--require-defined)
FAIL: PR ld/21233 dynamic symbols with section GC (EXTERN)
FAIL: Build pr22150
FAIL: PR ld/14170
FAIL: Link using broken linker script
FAIL: pr17068 link --as-needed lib in group
FAIL: ld-gc/pr20022
* emulparams/elf32lm32fd.sh (DYNAMIC_LINK): Undef.
Generic linker ELF targets using CREATE_OBJECT_SYMBOLS in their
scripts run into a problem. The file symbols are created by
_bfd_generic_link_output_symbols in each object file, in the section
corresponding to the CREATE_OBJECT_SYMBOLS section, typically .text.
If it so happens that the output .text section is stripped due to
being empty, then elf.c:assign_section_numbers won't assign an ELF
section number and swap_out_syms will report "unable to find
equivalent output section" for the object symbols. Fix this by
always keeping an output section with CREATE_OBJECT_SYMBOLS.
* ldlang.c (lang_size_sections_1): Set SEC_KEEP on
create_object_symbols_section.
* testsuite/ld-elf/pr22319.d: Don't xfail dlx.
* testsuite/ld-elf/merge.d: Remove csky from xfails, add moxie.
* testsuite/ld-elf/pr21884.d: Remove csky from xfails.
* testsuite/ld-elf/shared.exp: Add csky to list not xfailing pr22374.
* testsuite/ld-unique/pr21529.d: Remove csky from xfails
This is part of the patch series to add support for BTI and
PAC in AArch64 linker.
1) This patch adds new definitions of PAC enabled PLTs
and both BTI and PAC enabled PLTs.
2) It also defines the new dynamic tag DT_AARCH64_PAC_PLT
for the PAC enabled PLTs.
3) This patch adds a new ld command line option: --pac-plt.
In the presence of this option, the linker uses the PAC
enabled PLTs and marks with DT_AARCH64_PAC_PLT.
4) In case both BTI and PAC are enabled the linker should
pick PLTs enabled with both and also use dynamic tags for both.
All these are made according to the new AArch64 ELF ABI
https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4
*** bfd/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elfnn-aarch64.c (PLT_PAC_ENTRY_SIZE, PLT_PAC_SMALL_ENTRY_SIZE): New.
(PLT_BTI_PAC_ENTRY_SIZE, PLT_BTI_PAC_SMALL_ENTRY_SIZE): New.
(setup_plt_values): Account for PAC or PAC and BTI enabled PLTs.
(elfNN_aarch64_size_dynamic_sections): Add checks for PLT_BTI_PAC
and PLT_PAC_PLT.
(elfNN_aarch64_finish_dynamic_sections): Account for PLT_BTI_PAC.
(get_plt_type): Add case for DT_AARCH64_PAC_PLT.
(elfNN_aarch64_plt_sym_val): Add cases for PLT_BTI_PAC and PLT_PAC.
*** binutils/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* readelf.c (get_aarch64_dynamic_type): Add case for
DT_AARCH64_PAC_PLT.
(dynamic_section_aarch64_val): Likewise.
*** include/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elf/aarch64.h (DT_AARCH64_PAC_PLT): New.
*** ld/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* NEWS: Document --pac-plt.
* emultempl/aarch64elf.em (OPTION_PAC_PLT): New.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS): Add pac-plt.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_PAC_PLT.
* testsuite/ld-aarch64/aarch64-elf.exp: Add the following tests.
* testsuite/ld-aarch64/bti-pac-plt-1.d: New test.
* testsuite/ld-aarch64/bti-pac-plt-2.d: New test.
* testsuite/ld-aarch64/pac-plt-1.d: New test.
* testsuite/ld-aarch64/pac-plt-2.d: New test.
* testsuite/ld-aarch64/bti-plt-1.s: Add .ifndef directive.
This is part of the patch series to add support for BTI and
PAC in AArch64 linker.
1) This patch adds a new ld command line option: --force-bti.
In the presence of this option, the linker enables BTI with the
GNU_PROPERTY_AARCH64_FEATURE_1_BTI feature. This gives out warning
in case of missing gnu notes for BTI in inputs.
2) It also defines a new set of BTI enabled PLTs. These are used either
when all the inputs are marked with GNU_PROPERTY_AARCH64_FEATURE_1_BTI
or when the new --force-bti option is used. This required adding new
fields in elf_aarch64_link_hash_table so that we could make the PLT
related information more generic.
3) It also defines a dynamic tag DT_AARCH64_BTI_PLT. The linker uses
this whenever it picks BTI enabled PLTs.
All these are made according to the new AArch64 ELF ABI
https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4
*** bfd/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* bfd-in.h (aarch64_plt_type, aarch64_enable_bti_type): New.
(aarch64_bti_pac_info): New.
(bfd_elf64_aarch64_set_options): Add aarch64_bti_pac_info argument.
(bfd_elf32_aarch64_set_options): Likewise.
* bfd-in2.h: Regenerate
* elfnn-aarch64.c (PLT_BTI_ENTRY_SIZE): New.
(PLT_BTI_SMALL_ENTRY_SIZE, PLT_BTI_TLSDESC_ENTRY_SIZE): New.
(elfNN_aarch64_small_plt0_bti_entry): New.
(elfNN_aarch64_small_plt_bti_entry): New.
(elfNN_aarch64_tlsdesc_small_plt_bti_entry): New.
(elf_aarch64_obj_tdata): Add no_bti_warn and plt_type fields.
(elf_aarch64_link_hash_table): Add plt0_entry, plt_entry and
tlsdesc_plt_entry_size fields.
(elfNN_aarch64_link_hash_table_create): Initialise the new fields.
(setup_plt_values): New helper function.
(bfd_elfNN_aarch64_set_options): Use new bp_info to set plt sizes and
bti enable type.
(elfNN_aarch64_allocate_dynrelocs): Use new size members instead of
fixed macros.
(elfNN_aarch64_size_dynamic_sections): Likewise and add checks.
(elfNN_aarch64_create_small_pltn_entry): Use new generic pointers
to plt stubs instead of fixed ones and update filling them according
to the need for bti.
(elfNN_aarch64_init_small_plt0_entry): Likewise.
(elfNN_aarch64_finish_dynamic_sections): Likewise.
(get_plt_type, elfNN_aarch64_get_synthetic_symtab): New.
(elfNN_aarch64_plt_sym_val): Update size accordingly.
(elfNN_aarch64_link_setup_gnu_properties): Set up plts if BTI GNU NOTE
is set.
(bfd_elfNN_get_synthetic_symtab): Define.
(elfNN_aarch64_merge_gnu_properties): Give out warning with --force-bti
and mising BTI NOTE SECTION.
*** binutils/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* readelf.c (get_aarch64_dynamic_type): New.
(get_dynamic_type): Use above for EM_AARCH64.
(dynamic_section_aarch64_val): New.
(process_dynamic_section): Use above for EM_AARCH64.
*** include/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* elf/aarch64.h (DT_AARCH64_BTI_PLT): New.
*** ld/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* NEWS: Document --force-bti.
* emultempl/aarch64elf.em (plt_type, bti_type, OPTION_FORCE_BTI): New.
(PARSE_AND_LIST_SHORTOPTS, PARSE_AND_LIST_OPTIONS): Add force-bti.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_FORCE_BTI.
* testsuite/ld-aarch64/aarch64-elf.exp: Add all the tests below.
* testsuite/ld-aarch64/bti-plt-1.d: New test.
* testsuite/ld-aarch64/bti-plt-1.s: New test.
* testsuite/ld-aarch64/bti-plt-2.s: New test.
* testsuite/ld-aarch64/bti-plt-2.d: New test.
* testsuite/ld-aarch64/bti-plt-3.d: New test.
* testsuite/ld-aarch64/bti-plt-4.d: New test.
* testsuite/ld-aarch64/bti-plt-5.d: New test.
* testsuite/ld-aarch64/bti-plt-6.d: New test.
* testsuite/ld-aarch64/bti-plt-7.d: New test.
* testsuite/ld-aarch64/bti-plt-so.s: New test.
* testsuite/ld-aarch64/bti-plt.ld: New test.
This is part of the patch series to add support for BTI and
PAC in AArch64 linker.
This patch implements the following:
1) This extends in the gnu property support in the linker for
AArch64 by defining backend hooks for elf_backend_setup_gnu_properties,
elf_backend_merge_gnu_properties and elf_backend_parse_gnu_properties.
2) It defines AArch64 specific GNU property
GNU_PROPERTY_AARCH64_FEATURE_1_AND and 2 bit for BTI and PAC in it.
3) It also adds support in readelf.c to read and print these new
GNU properties in AArch64.
All these are made according to the new AArch64 ELF ABI
https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4
*** bfd/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elf-properties.c (_bfd_elf_link_setup_gnu_properties): Exclude
linker created inputs from merge.
* elfnn-aarch64.c (struct elf_aarch64_obj_tdata): Add field for
GNU_PROPERTY_AARCH64_FEATURE_1_AND properties.
(elfNN_aarch64_link_setup_gnu_properties): New.
(elfNN_aarch64_merge_gnu_properties): New.
(elf_backend_setup_gnu_properties): Define for AArch64.
(elf_backend_merge_gnu_properties): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_link_setup_gnu_properties): Define.
(_bfd_aarch64_elf_parse_gnu_properties): Define.
(_bfd_aarch64_elf_merge_gnu_properties): Define.
* elfxx-aarch64.h (_bfd_aarch64_elf_link_setup_gnu_properties): Declare.
(_bfd_aarch64_elf_parse_gnu_properties): Declare.
(_bfd_aarch64_elf_merge_gnu_properties): Declare.
(elf_backend_parse_gnu_properties): Define for AArch64.
*** binutils/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* readelf.c (decode_aarch64_feature_1_and): New.
(print_gnu_property_note): Add case for AArch64 gnu notes.
*** include/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elf/common.h (GNU_PROPERTY_AARCH64_FEATURE_1_AND): New.
(GNU_PROPERTY_AARCH64_FEATURE_1_BTI): New.
(GNU_PROPERTY_AARCH64_FEATURE_1_PAC): New.
*** ld/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* NEWS: Document GNU_PROPERTY_AARCH64_FEATURE_1_BTI and
GNU_PROPERTY_AARCH64_FEATURE_1_PAC.
* testsuite/ld-aarch64/aarch64-elf.exp: Add run commands for new tests.
* testsuite/ld-aarch64/property-bti-pac1.d: New test.
* testsuite/ld-aarch64/property-bti-pac1.s: New test.
* testsuite/ld-aarch64/property-bti-pac2.d: New test.
* testsuite/ld-aarch64/property-bti-pac2.s: New test.
* testsuite/ld-aarch64/property-bti-pac3.d: New test.
There should be no AND properties if some input doesn't have them. We
should set IBT and SHSTK properties for -z ibt and -z shstk if needed.
bfd/
PR ld/24322
* elfxx-x86.c (_bfd_x86_elf_merge_gnu_properties): Properly
merge GNU_PROPERTY_X86_FEATURE_1_[IBT|SHSTK].
ld/
PR ld/24322
* testsuite/ld-i386/i386.exp: Run PR ld/24322 tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr24322a.d: New file.
* testsuite/ld-i386/pr24322b.d: Likewise.
* testsuite/ld-x86-64/pr24322a-x32.d: Likewise.
* testsuite/ld-x86-64/pr24322a.d: Likewise.
* testsuite/ld-x86-64/pr24322b-x32.d: Likewise.
* testsuite/ld-x86-64/pr24322b.d: Likewise.
* testsuite/ld-x86-64/pr24322a.s: Likewise.
* testsuite/ld-x86-64/pr24322b.s: Likewise.
* testsuite/ld-x86-64/pr24322c.s: Likewise.
Skip symbol defined by linker when checking copy reloc on protected
symbol.
bfd/
PR ld/24276
* elf64-x86-64.c (elf_x86_64_check_relocs): Skip symbol defined
by linker when checking copy reloc on protected symbol.
ld/
PR ld/24276
* testsuite/ld-i386/i386.exp: Run PR ld/24276 test.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr24276.dso: New file.
* testsuite/ld-i386/pr24276.warn: Likewise.
* testsuite/ld-x86-64/pr24276.dso: Likewise.
* testsuite/ld-x86-64/pr24276.warn: Likewise.
The syntax we ended up with for -m32 -fPIC calls to __tls_get_addr is
rather weird.
bl __tls_get_addr+0x8000(gd0@tlsgd)@plt
This came about by accident, probably due to requiring the arg reloc
before the call reloc.
Of course the @plt really belongs with __tls_get_addr since it affects
the call rather than the call arg, and it isn't a great deal of
trouble to ensure the relocs are emitted in the correct order. This
patch supports a newer syntax, like so:
bl __tls_get_addr+0x8000@plt(gd0@tlsgd)
gas/
* config/tc-ppc.c (parse_tls_arg): New function, extracted..
(md_assembler): ..from here. Call it after parsing other
suffix modifiers too.
ld/
* testsuite/ld-powerpc/tls32.s: Test new @plt syntax.
Big section alignment requirements between source and destination of a
long call can result in making call range bigger than what's reachable
by the call opcode. Add biggest section alignment of sections between
the call site and call destination to the call distance when making
long call relaxation decision.
2019-02-20 Eric Tsai <erictsai@cadence.com>
bfd/
* elf32-xtensa.c (is_resolvable_asm_expansion): Scan output
sections between the call site and call destination and adjust
call distance by the largest alignment.
ld/
* testsuite/ld-xtensa/call_overflow.d: New test definition.
* testsuite/ld-xtensa/call_overflow1.s: New test source.
* testsuite/ld-xtensa/call_overflow2.s: New test source.
* testsuite/ld-xtensa/call_overflow3.s: New test source.
* testsuite/ld-xtensa/xtensa.exp: Add call_overflow test.
... as a follow-up to commit d981640286 "Run more
ld tests when not native", which replaced by a proper solution the following
mess before present in 'ld/configure.host':
-*-*-gnu*)
- # When creating static executables, we ought to use crt0.o instead of crt1.o,
- # <http://www.gnu.org/software/hurd/open_issues/binutils.html#static>,
- # but the testing infrastructure is not prepared for that. This is not
- # relevant for most tests, and the few remaining ones have been XFAILed.
- HOSTING_CRT0='[...]'
- HOSTING_LIBS='[...]'
ld/
* testsuite/ld-elf/elf.exp: Remove Hurd XFAILs.
Recent gcc commit b4371b277f1e ("[ARC] Enable init_array support")
inhibits DT_"INIT,FINI} in favor of DT_{INIT,FINI}ARRAY.
Even prior to that, it seems ARC port is the only one with this
special DT_INIT/FINI handling in linker emulation. Removing it
doesn't seem to change any uClibc/glibc testsuite results,
so this can RIP anyways.
bfd/
2019-02-01 Vineet Gupta <vgupta@synopsys.com>
* elf32-arc.c: Delete init_str, fini_str
ld/
2019-02-01 Vineet Gupta <vgupta@synopsys.com>
* emultempl/arclinux.em : Delete special INIT/FINI handling.
These targets were all failing due to extra symbols.
pdp11-dec-aout +FAIL: ld-scripts/pr24008
powerpc-aix5.1 +FAIL: ld-scripts/pr24008
powerpc-aix5.2 +FAIL: ld-scripts/pr24008
rs6000-aix4.3.3 +FAIL: ld-scripts/pr24008
rs6000-aix5.1 +FAIL: ld-scripts/pr24008
rs6000-aix5.2 +FAIL: ld-scripts/pr24008
Some fails remain, those I saw were segfaults or assertion fails that
indicate target bugs.
PR ld/24008
* testsuite/ld-scripts/pr24008.d: Pass with extra target
defined symbols.
commit bd7ab16b45
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Tue Feb 13 07:34:22 2018 -0800
x86-64: Generate branch with PLT32 relocation
removed check R_X86_64_PC32 relocation against protected symbols in
shared objects. Since elf_x86_64_check_relocs is called after we
have seen all input files, we can check for PC-relative relocations in
elf_x86_64_check_relocs. We should not allow PC-relative relocations
against protected symbols since address of protected function and
location of protected data may not be in the shared object.
bfd/
PR ld/24151
* elf64-x86-64.c (elf_x86_64_need_pic): Check
SYMBOL_DEFINED_NON_SHARED_P instead of def_regular.
(elf_x86_64_relocate_section): Move PIC check for PC-relative
relocations to ...
(elf_x86_64_check_relocs): Here.
(elf_x86_64_finish_dynamic_symbol): Use SYMBOL_DEFINED_NON_SHARED_P
to check if a symbol is defined in a non-shared object.
* elfxx-x86.h (SYMBOL_DEFINED_NON_SHARED_P): New.
ld/
PR ld/24151
* testsuite/ld-x86-64/pr24151a-x32.d: New file.
* testsuite/ld-x86-64/pr24151a.d: Likewise.
* testsuite/ld-x86-64/pr24151a.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr24151a and pr24151a-x32.
PR 24008
* ldexp.h (lang_phase_type): Add lang_fixed_phase_enum.
* ldexp.c (fold_name): Move expld.assign_name check later to
avoid an extra lookup.
(exp_fold_tree_1): When lang_fixed_phase_enum, don't change symbol
values, and don't clear expld.assign_name.
* ldlang.c (lang_map): Set expld.phase to lang_fixed_phase_enum.
(print_assignment): Resolve entire assignment expression.
Don't access symbol u.def unless symbol is defined.
place_orphan handled ELF SHT_REL/SHT_RELA specially, output_rel_find
didn't. This mismatch was a bug and also meant it was possible to
craft an object where ld accessed section->name out of bounds.
PR 24042
* emultempl/elf32.em (output_rel_find): Drop "sec" param. Add
"rela".
(gld${EMULATION_NAME}_place_orphan): Use sh_type to calculate
"rela" param of output_rel_find when ELF. Tidy uses of elfinput.
For PLT expressions, we should subtract the PLT relocation size only for
jump instructions. Since PLT relocations are PC relative, we only allow
"symbol@PLT" in PLT expression.
gas/
PR gas/23997
* config/tc-i386.c (x86_cons): Check for invalid PLT expression.
(md_apply_fix): Subtract the PLT relocation size only for jump
instructions.
* testsuite/gas/i386/reloc32.s: Add test for invalid PLT
expression.
* testsuite/gas/i386/reloc64.s: Likewise.
* testsuite/gas/i386/ilp32/reloc64.s: Likewise.
* testsuite/gas/i386/reloc32.l: Updated.
* testsuite/gas/i386/reloc64.l: Likewise.
* testsuite/gas/i386/ilp32/reloc64.l: Likewise.
ld/
PR gas/23997
* testsuite/ld-i386/i386.exp: Run PR gas/23997 test.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr23997a.s: New file.
* testsuite/ld-x86-64/pr23997b.c: Likewise.
* testsuite/ld-x86-64/pr23997c.c: Likewise.
Linkers group input note sections with the same name into one output
note section with the same name. One output note section is placed in
one PT_NOTE segment. New linkers merge all input .note.gnu.property
sections into one output .note.gnu.property section with a single
NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older
linkers treat input .note.gnu.property section as a generic note section
and just concatenate all input .note.gnu.property sections into one
output .note.gnu.property section without merging them, we may
see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which
are invalid.
GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such
that linker sets the bit for non-relocatable outputs. But it isn't
sufficient:
1. It doesn't cover generic properties.
2. When -mx86-used-note=yes is passed to x86 assembler, the
GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED
property in object file and older linkers generate invalid
NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit
set.
I am proposing the following changes:
1. Add PT_GNU_PROPERTY segment type:
# define PT_GNU_PROPERTY (PT_LOOS + 0x474e553)
which covers .note.gnu.property section.
2. Remove GNU_PROPERTY_X86_UINT32_VALID.
bfd/
PR ld/23900
* elf.c (get_program_header_size): Add a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
(_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
* elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
binutils/
PR ld/23900
* readelf.c (get_segment_type): Support PT_GNU_PROPERTY.
(decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID.
(decode_x86_feature_1): Likewise.
(decode_x86_feature_2): Likewise.
(print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID
check.
* testsuite/binutils-all/i386/empty.d: Updated.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/i386/pr21231b.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff.
* testsuite/binutils-all/x86-64/pr21231b.s: Likewise.
gas/
PR ld/23900
* config/tc-i386.c (x86_cleanup): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
* testsuite/gas/i386/property-1.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
include/
PR ld/23900
* elf/common.h (PT_GNU_PROPERTY): New.
(GNU_PROPERTY_X86_UINT32_VALID): Removed.
ld/
PR ld/23900
* testsuite/ld-elf/elf.exp: Run PR ld/23900 test.
* testsuite/ld-elf/pr23900-1-32.rd: New file.
* testsuite/ld-elf/pr23900-1-64.rd: Likewise.
* testsuite/ld-elf/pr23900-1.d: Likewise.
* testsuite/ld-elf/pr23900-1.s: Likewise.
* testsuite/ld-elf/pr23900-2.s: Likewise.
* testsuite/ld-elf/pr23900-2a.d: Likewise.
* testsuite/ld-elf/pr23900-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.d: Adjusted.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/pr23372c.d: Expect <None>
for GNU_PROPERTY_X86_ISA_1_USED.
* testsuite/ld-x86-64/pr23372c-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372c.d: Likewise.
* testsuite/ld-x86-64/pr23372d-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372d.d: Likewise.
* testsuite/ld-x86-64/property-x86-5a.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
* testsuite/ld-x86-64/property-x86-5b.s: Likewise.
Mark the previous definition from IR object as undefined so that the
generic linker will override it.
bfd/
PR ld/23958
* elflink.c (_bfd_elf_add_default_symbol): Override the previous
definition from IR object.
ld/
PR ld/23958
* testsuite/ld-plugin/lto.exp: Run PR ld/23958 test.
* testsuite/ld-plugin/pr23958.c: New file.
* testsuite/ld-plugin/pr23958.t: Likewise.
For GNU_PROPERTY_X86_COMPAT_ISA_1_USED and GNU_PROPERTY_X86_UINT32_OR_AND
properties, a bit in the output pr_data field is set if it is set in any
relocatable input pr_data fields and this property is present in all
relocatable input files. A missing property implies that its bits have
unknown values. When all bits in the the output pr_data field are zero,
this property should not be removed from output to indicate it has zero
in all bits.
bfd/
PR ld/23372
* elfxx-x86.c (_bfd_x86_elf_merge_gnu_properties): Don't remove
empty properties for GNU_PROPERTY_X86_COMPAT_ISA_1_USED and
GNU_PROPERTY_X86_UINT32_OR_AND.
(_bfd_x86_elf_link_fixup_gnu_properties): Likewise.
ld/
PR ld/23372
* testsuite/ld-i386/pr23372a.d: Updated.
* testsuite/ld-i386/pr23372c.d: Likewise.
* testsuite/ld-x86-64/pr23372a-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372a.d: Likewise.
* testsuite/ld-x86-64/pr23372c-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372c.d: Likewise.
Delay setting its alignment until we know it is non-empty. Otherwise an
empty iplt section may change vma and lma of the following sections, which
triggers moving dot of the following section backwards, resulting in a
warning and section lma not being set properly. It later leads to a
"File truncated" error.
bfd/
PR ld/23930
* elfxx-x86.c (_bfd_x86_elf_size_dynamic_sections): Update
the iplt section alignment if it is non-empty.
(_bfd_x86_elf_link_setup_gnu_properties): Set plt.iplt_alignment
and delay setting the iplt section alignment.
* elfxx-x86.h (elf_x86_plt_layout): Add iplt_alignment.
ld/
PR ld/23930
* testsuite/ld-i386/i386.exp: Run pr23930.
* testsuite/ld-i386/pr23930.d: New file.
* testsuite/ld-x86-64/pr23930-32.t: Likewise.
* testsuite/ld-x86-64/pr23930-x32.d: Likewise.
* testsuite/ld-x86-64/pr23930.d: Likewise.
* testsuite/ld-x86-64/pr23930.t: Likewise.
* testsuite/ld-x86-64/pr23930a.s: Likewise.
* testsuite/ld-x86-64/pr23930b.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr23930 and pr23930-x32.
IFUNC resolvers must always be called via their global entry point.
They will be called from ld.so rather than from the local executable.
PR 23937
bfd/
* elf64-ppc.c (write_plt_relocs_for_local_syms): Don't add local
entry offset for ifuncs.
ld/
* testsuite/ld-powerpc/pr23937.d,
* testsuite/ld-powerpc/pr23937.s: New test.
* testsuite/ld-powerpc/powerpc.exp: Run it.
When discovering the statement lists via their header variable
statement_list, file_chain and input_file_chain it can be confusing to
figure out what they are for. They can point to the same initial
statement and the relation between the next field they use is not
obvious from the name.
This commit adds comment for each of those statement list header to
explain what they are for and what next field they use. It also rewrite
the comment for the next fields to simply redirect the reader to the
list header to avoid duplication of documentation.
2018-11-29 Thomas Preud'homme <thomas.preudhomme@linaro.org>
ld/
* ldlang.c (statement_list): Document purpose and what next field it
uses.
(file_chain): Likewise.
(input_file_chain): Likewise.
* ldlang.h (lang_statement_header_type): Document statement list header
the next pointer correspond to.
(lang_statement_header_type): Replace comment for next and
next_real_file field to refer the reader to their corresponding
statement list header.
Accept R_MIPS_HI16, R_MIPS_HIGHER and R_MIPS_HIGHEST relocations and
their compressed counterparts in PIC code where the symbol referred is
absolute. Such an operation is meaningful, because an absolute symbol
effectively is a constant the calculation of the value of which has been
deferred to the static link time, and which is not going to change any
further at the dynamic load time. Therefore there is no need ever to
refuse the use of these relocations with such symbols, as the resulting
run-time value observed by the program will be correct even in PIC code.
This is not the case with R_MIPS_26 and its compressed counterparts,
because the run-time value calculated by the instructions these
relocations are used with depends on the address of the instruction
itself, and that can change according to the base address used by the
dynamic loader. Therefore these relocations have to continue being
rejected in PIC code even with absolute symbols.
This allows successful linking of code that relies on previous linker
behavior up to commit 861fb55ab5 ("Defer allocation of R_MIPS_REL32
GOT slots"), <https://sourceware.org/ml/binutils/2008-08/msg00096.html>,
which introduced the problematic check missing this special exception
for absolute symbols.
bfd/
* elfxx-mips.c (_bfd_mips_elf_check_relocs) <R_MIPS16_HI16>
<R_MIPS_HI16, R_MIPS_HIGHER, R_MIPS_HIGHEST, R_MICROMIPS_HI16>
<R_MICROMIPS_HIGHER, R_MICROMIPS_HIGHEST>: Also accept an
absolute symbol in PIC code.
ld/
* testsuite/ld-mips-elf/pic-reloc-0.d: New test.
* testsuite/ld-mips-elf/pic-reloc-1.d: New test.
* testsuite/ld-mips-elf/pic-reloc-2.d: New test.
* testsuite/ld-mips-elf/pic-reloc-3.d: New test.
* testsuite/ld-mips-elf/pic-reloc-4.d: New test.
* testsuite/ld-mips-elf/pic-reloc-absolute-hi.ld: New test
linker script.
* testsuite/ld-mips-elf/pic-reloc-absolute-lo.ld: New test
linker script.
* testsuite/ld-mips-elf/pic-reloc-ordinary.ld: New test linker
script.
* testsuite/ld-mips-elf/pic-reloc-j.s: New test source.
* testsuite/ld-mips-elf/pic-reloc-lui.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Similarly to commit 174d0a74a2 ("PowerPC/BFD: Convert `%P: %H:' to
`%H:' in error messages") convert linker relocation error messages to
use `%H:' rather `%P: %H:', removing inconsistent message composition
like:
$ cat reloc-j.s
.text
.globl foo
.ent foo
foo:
j bar
j bar
.end foo
$ cat reloc-j.ld
SECTIONS
{
bar = 0x12345678;
.text : { *(.text) }
/DISCARD/ : { *(*) }
}
$ as -o reloc-j.o reloc-j.s
$ ld -T reloc-j.ld -o reloc-j reloc-j.o
ld: tmpdir/reloc-j.o: in function `foo':
(.text+0x0): relocation truncated to fit: R_MIPS_26 against `bar'
ld: (.text+0x8): relocation truncated to fit: R_MIPS_26 against `bar'
$
where subsequent lines referring to issues within a single function have
the name of the linker executable prepended, but the first one does not.
As noted with the commit referred this breaks a GNU Coding Standard's
requirement that error messages from compilers should look like this:
source-file-name:lineno: message
also quoted in `vfinfo' code handling these specifiers.
Remove the linker name prefix then, making the messages now look like:
$ ld -T reloc-j.ld -o reloc-j reloc-j.o
tmpdir/reloc-j.o: in function `foo':
(.text+0x0): relocation truncated to fit: R_MIPS_26 against `bar'
(.text+0x8): relocation truncated to fit: R_MIPS_26 against `bar'
$
instead.
ld/
* ldmain.c (reloc_overflow): Use `%H:' rather than `%P: %H:'
with `einfo'.
(reloc_dangerous): Likewise.
(unattached_reloc): Likewise.
The fix for PR ld/22263 causes TLS relocations using ADRP to be relaxed
into MOVZ, however this causes issues for the erratum code.
The erratum code scans the input sections looking for ADRP instructions
and notes their location in the stream.
It then later tries to find them again in order to generate the linker
stubs. Due to the relaxation it instead finds a MOVZ and hard aborts.
Since this relaxation is a valid one, and in which case the erratum no
longer applies, it shouldn't abort but instead just continue.
This changes the TLS relaxation code such that when it finds an ADRP and
it relaxes it, it removes the erratum entry from the work list by changing
the stub type into none so the stub is ignored.
The entry is not actually removed as removal is a more expensive operation
and we have already allocated the memory anyway.
The clearing is done for IE->LE and GD->LE relaxations, and a testcase is
added for the IE case. The GD case I believe to be impossible to get together
with the erratum sequence due to the required BL which would break the sequence.
However to cover all basis I have added the guard there as well.
build on native hardware and regtested on
aarch64-none-elf, aarch64-none-elf (32 bit host),
aarch64-none-linux-gnu, aarch64-none-linux-gnu (32 bit host)
Cross-compiled and regtested on
aarch64-none-linux-gnu, aarch64_be-none-linux-gnu
Testcase in PR23940 tested and works as expected now and benchmarks ran on A53
showing no regressions and no issues.
bfd/ChangeLog:
PR ld/23904
* elfnn-aarch64.c (_bfd_aarch64_adrp_p): Use existing constants.
(_bfd_aarch64_erratum_843419_branch_to_stub): Use _bfd_aarch64_adrp_p.
(struct erratum_835769_branch_to_stub_clear_data): New.
(_bfd_aarch64_erratum_843419_clear_stub): New.
(clear_erratum_843419_entry): New.
(elfNN_aarch64_tls_relax): Use it.
(elfNN_aarch64_relocate_section): Pass input_section.
(aarch64_map_one_stub): Handle branch type none as valid.
ld/ChangeLog:
PR ld/23904
* testsuite/ld-aarch64/aarch64-elf.exp: Add erratum843419_tls_ie.
* testsuite/ld-aarch64/erratum843419_tls_ie.d: New test.
* testsuite/ld-aarch64/erratum843419_tls_ie.s: New test.
Glibc commit:
commit a15529fda8d132621328c3fe32997a3d9c55aef4
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Mon May 14 09:23:55 2018 -0700
i386: Replace PREINIT_FUNCTION@PLT with *%eax in call
Since we have loaded address of PREINIT_FUNCTION into %eax, we can
avoid extra branch to PLT slot.
changed __gmon_start__ relocations in crt1.o from
00000015 0000092b R_386_GOT32X 00000000 __gmon_start__
0000001e 00000904 R_386_PLT32 00000000 __gmon_start__
to
00000015 00000a2b R_386_GOT32X 00000000 __gmon_start__
As the result, .plt.sec section may be generated instead of .plt.got
section, depending on __gmon_start__ relocations.
* testsuite/ld-i386/plt-main-ibt.dd: Accept both .plt.got and
.plt.sec sections.
Add --enable-x86-feature and --disable-x86-feature options to elfedit
to set and clear the IBT and SHSTK bits in program property in ELF
executables and shared objects.
binutils/
* doc/binutils.texi: Document --enable-x86-feature and
--disable-x86-feature options for elfedit.
* elfedit.c: Include "config.h" and <sys/mman.h>.
(enable_x86_features): New.
(disable_x86_features): Likewise.
(update_gnu_property): Likewise.
(elf_x86_feature): Likewise.
(process_file): Call update_gnu_property on ET_EXEC or ET_DYN
file.
(command_line_switch): Add OPTION_ENABLE_X86_FEATURE and
OPTION_DISABLE_X86_FEATURE.
(options): Add--enable-x86-feature and --disable-x86-feature.
(usage): Likewise.
(main): Handle OPTION_ENABLE_X86_FEATURE and
OPTION_DISABLE_X86_FEATURE.
ld/
* testsuite/config/default.exp (ELFEDIT): New.
* testsuite/ld-elf/linux-x86.exp (elfedit_test): New proc.
Run elfedit tests.
* testsuite/ld-elf/x86-feature-1a.rd: New file.
* testsuite/ld-elf/x86-feature-1b.rd: Likewise.
* testsuite/ld-elf/x86-feature-1c.rd: Likewise.
* testsuite/ld-elf/x86-feature-1d.rd: Likewise.
* testsuite/ld-elf/x86-feature-1e.rd: Likewise.
commit e60f4d3bda
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Mon Nov 5 09:01:26 2018 -0800
x86: Disable GOT relaxation with data prefix
Since linker GOT relaxation isn't valid for 16-bit GOT access, we should
disable GOT relaxation with data prefix.
run_dump_test proposes an ld action but when trying to make use of it in
a gas test it gave me some Tcl error. It turns out that it references
the check_shared_lib_support procedure and ld_elf_shared_opt variable
both only available in ld-lib.exp. I've thus moved the procedure in
binutils-common.exp and defined the variable needed in the various
default.exp of testsuite that seem to be using run_dump_test.
Since check_shared_lib_support itself references the ld variable not
defined in binutils-common I've defined it from LD in run_dump_test and
fixed LD and LDFLAGS to be defined as expected by run_dump_test in the
various default.exp of testsuite using run_dump_test.
2018-11-01 Thomas Preud'homme <thomas.preudhomme@linaro.org>
binutils/
* testsuite/config/default.exp: Define LD, LDFLAGS and
ld_elf_shared_opt.
* testsuite/lib/binutils-common.exp (check_shared_lib_support): Moved
from ld-lib.exp.
(run_dump_test): Set ld to $LD.
gas/
* testsuite/config/default.exp: Define LD, LDFLAGS and
ld_elf_shared_opt.
ld/
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Moved to
binutils-common.exp.
The idea of this change is to make -t output useful for users wanting
to package all the object files involved in linking for a bug report.
Something like the following should do the trick.
gcc hello.c -save-temps -Wl,-t | xargs realpath | sort | uniq > files
tar cJf test.tar.xz `cat files`
* ldlang.c (load_symbols): When -t, print file names for script
files and archives.
* ldmain.c (trace_files): Make an int.
(add_archive_element): Print archive elements only with multiple
-t options, or when archive is thin.
* ldmain.h (trace_files): Update.
* ldmisc.c (vfinfo): Don't print both original path and path in
sysroot.
* lexsup.c (parse_args <t>): Increment trace_files.
This output really belongs in ld --verbose.
* ldmain.c (main): Print emulation mode and "deleting executable"
for --verbose, not --trace.
(add_archive_element): Only print "no new IR symbols" for --verbose.
Prepending '/' to absolute paths doesn't gain us much, and results in
the current implementation of --trace emitting silly path-in-sysroot
output, eg.
/lib/ld-linux-x86-64.so.2 (//lib/ld-linux-x86-64.so.2)
* ldmain.c (get_sysroot): Return "" for "--sysroot=/".
For ld -r, we generally set the VMA of sections to zero. This is done
to make the output of ld -r most similar to that output by the
assembler, which generally has sections starting at VMA zero. In some
cases that covers for backend bugs which would mis-handle relocatable
object files with non-zero section VMAs.
This patch fixes a few sections that didn't have zero VMAs for ld -r.
A missing zero on .note.gnu.build-id and .eh_frame_hdr doesn't matter
much since these are linker generated symbols only output on final
link, but it's good to be consistent.
* Makefile.am (ei386beos.c, ei386go32.c): Correct dependencies.
* Makefile.in: Regenerate.
* scripttempl/elf.sc (.note.gnu.build-id, .eh_frame_hdr): Set
address with ${RELOCATING-0}.
* scripttempl/arclinux.sc: Likewise.
* scripttempl/armbpabi.sc: Likewise.
* scripttempl/avr.sc: Likewise.
* scripttempl/elf64hppa.sc: Likewise.
* scripttempl/elf_chaos.sc: Likewise.
* scripttempl/elfarc.sc: Likewise.
* scripttempl/elfxtensa.sc: Likewise.
* scripttempl/mep.sc: Likewise.
* scripttempl/nds32elf.sc: Likewise.
* scripttempl/pru.sc: Likewise.
* scripttempl/elf32msp430.sc: Likewise, and for other sections.
* scripttempl/epiphany_4x4.sc: Similarly.
Commit 91ae256e33 fixes the behavior of ld when `--gc-sections` and
`--gc-keep-exported` are both given on the linker command line. This
updates the ld documentation to suit.
* ld.texi (--gc-sections): Update.
When assigning symbol version, we should hide debug symbols defined in
discarded sections from IR objects so that they can be removed later.
bfd/
PR ld/23818
* elflink.c (_bfd_elf_link_assign_sym_version): Hide symbols
defined in discarded input sections.
ld/
PR ld/23818
* testsuite/ld-plugin/lto.exp: Run PR ld/23818 test.
* testsuite/ld-plugin/pr23818.d: New file.
* testsuite/ld-plugin/pr23818.t: Likewise.
* testsuite/ld-plugin/pr23818a.c: Likewise.
* testsuite/ld-plugin/pr23818b.c: Likewise.
Fixes a couple of ERROR results due to .set difference on alpha.
* testsuite/ld-elf/shared.exp: Don't build pr19073 test on alpha.
* testsuite/ld-elf/pr18720b.c: Don't use .set on alpha.
A symbol root is not needed if --gc-keep-exported is also given.
* ldlang.c (lang_end): Don't error if no --entry or --undefined
is given with -r -gc-sections if --gc-keep-exported.
This patch performs a run-time test that a shared libbfd.so has been
compiled with the same size bfd_vma as that of apps using the library.
On a 32-bit host it is easily possible to have one libbfd.so compiled
to support 64-bit targets (or configured with --enable-64-bit-bfd)
while another only supports 32-bit targets. The two libraries will
have differently sized bfd_vma types, and if the wrong one is loaded
all sorts of weird behaviour might be seen.
bfd/
PR 23534
* init.c (BFD_INIT_MAGIC): Define.
(bfd_init): Return BFD_INIT_MAGIC.
bfd-in2.h: Regenerate.
binutils/
PR 23534
* addr2line.c (main): Exit with fatal error if bfd_init
returns an unexpected value.
* ar.c (main): Likewise.
* dlltool.c (identify_dll_for_implib): Likewise.
* nm.c (main): Likewise.
* objcopy.c (main): Likewise.
* objdump.c (main): Likewise.
* size.c (main): Likewise.
* strings.c (main): Likewise.
* windmc.c (main): Likewise.
* windres.c (main): Likewise.
gas/
PR 23534
* as.c (main): Exit with fatal error if bfd_init returns an
unexpected value.
ld/
PR 23534
* ldmain.c (main): Exit with fatal error if bfd_init returns
an unexpected value.
With
commit 64029e9368
Author: Alan Modra <amodra@gmail.com>
Date: Fri Oct 5 11:40:54 2018 +0930
Separate header PT_LOAD for -z separate-code
there is no need to add a GNU_PROPERTY_X86_ISA_1_USED note to force
program header in in non-code PT_LOAD segment when -z separate-code
is used.
bfd/
PR ld/23428
* elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Don't
add GNU_PROPERTY_X86_FEATURE_2_NEEDED to force program header
in non-code PT_LOAD segment.
ld/
PR ld/23428
* testsuite/ld-i386/property-x86-4a.d: Updated.
* testsuite/ld-x86-64/property-x86-4a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-4a.d: Likewise.
Properly group orphan note sections. When placing orphan note section
as the first note section, place it after the section before all note
sections.
PR ld/23658
* ldlang.c (lang_insert_orphan): Properly group and place orphan
note sections. Properly handle orphan note section before all
note sections.
* testsuite/ld-elf/pr23658-1.d: Renamed to ...
* testsuite/ld-elf/pr23658-1a.d: This. Updated.
* testsuite/ld-elf/pr23658-1b.d: New test.
* testsuite/ld-elf/pr23658-1c.d: Likewise.
This patch, along with previous patches in the series, supports
putting the ELF file header and program headers in a PT_LOAD without
sections.
Logic governing whether headers a loaded has changed a little: The
primary reason to include headers is now the presence of
SIZEOF_HEADERS in a linker script. However, to support scripts that
may have reserved space for headers by hand, we continue to add
headers whenever the first section address is past the end of headers
modulo page size.
include/
* bfdlink.h (struct bfd_link_info): Add load_phdrs field.
bfd/
* elf-nacl.c (nacl_modify_segment_map): Cope with header PT_LOAD
lacking sections.
* elf.c (_bfd_elf_map_sections_to_segments): Assume file and
program headers are required when info->load_phdrs. Reorganize
code handling program headers. Generate a mapping without
sections just for file and program headers when -z separate-code
would indicate they should be on a different page to the first
section.
ld/
* ldexp.c (fold_name <SIZEOF_HEADERS>): Set link_info.load_phdrs.
* testsuite/ld-elf/loadaddr1.d: Pass -z noseparate-code.
* testsuite/ld-elf/loadaddr2.d: Likewise.
* testsuite/ld-i386/vxworks2.sd: Adjust expected output.
* testsuite/ld-powerpc/vxworks2.sd: Likewise.
* testsuite/ld-elf/overlay.d: Remove spu xfail.
* testsuite/ld-spu/ovl.lnk: Don't use SIZEOF_HEADERS.
* testsuite/ld-tic6x/dsbt-be.ld: Likewise.
* testsuite/ld-tic6x/dsbt-inrange.ld: Likewise.
* testsuite/ld-tic6x/dsbt-overflow.ld: Likewise.
* testsuite/ld-tic6x/dsbt.ld: Likewise.
Some time ago the pr19593 test was xfailed for alpha. This turned out
to be the wrong course of action since the test exposed a bug in
orphan section placement. On alpha, orphan sections were being
inserted before ". = SIZEOF_HEADERS" due to the test having two
assignments, and on alpha, an output section statement from
-Ttext-segment being passed to ld.
* ldlang.c (insert_os_after): Clear ignore_first on assignment to
dot, not any assignment. Clear ignore_first on output section
statement contents too.
* testsuite/ld-elf/pr19539.d: Remove alpha xfail.
Some targets don't set a default interpreter, resulting in an empty
.interp section unless --dynamic-linker is passed to ld. A PT_INTERP
without a path is rather useless.
The testsuite change fixes a failure on microblaze-linux.
bfd/
* elf.c (get_program_header_size): Don't count PT_INTERP if
.interp is empty.
(_bfd_elf_map_sections_to_segments): Don't create PT_INTERP if
.interp is empty.
ld/
* testsuite/ld-elf/pr22423.d: Pass --dynamic-linker to ld.
This patch adds the new instruction and relocation as per proposal:
https://openrisc.io/proposals/ladrp
This is to be added to the spec in an upcoming revision. The new instruction
l.adrp loads the page offset of the current instruction offset by
a 21-bit immediate shifted left 13-bits. This is meant to be used with
a 13-bit lower bit page offset. This allows us to free up the got
register r16.
l.adrp r3, foo
l.ori r4, r3, po(foo)
l.lbz r5, po(foo)(r3)
l.sb po(foo)(r3), r6
The relocations we add are:
- BFD_RELOC_OR1K_PLTA26 For PLT jump relocation with PLT entry
asm: plta() implemented using l.ardp, meaning
no need for r16 (the GOT reg)
- BFD_RELOC_OR1K_GOT_PG21 Upper 21-bit Page offset got address
asm: got()
- BFD_RELOC_OR1K_TLS_GD_PG21 Upper 21-bit Page offset with TLS General
asm: tlsgd() Dynamic calculation
- BFD_RELOC_OR1K_TLS_LDM_PG21 Upper 21-bit Page offset with TLS local
asm: tlsldm() dynamic calculation
- BFD_RELOC_OR1K_TLS_IE_PG21 Upper 21-bit Page offset with TLS Initial
asm: gottp() Executable calculation
- BFD_RELOC_OR1K_PCREL_PG21 Default relocation for disp21 (l.adrp
instructions)
- BFD_RELOC_OR1K_LO13 low 13-bit page offset relocation
asm: po() i.e. mem loads, addi etc
- BFD_RELOC_OR1K_SLO13 low 13-bit page offset relocation
asm: po() i.e. mem stores, with split immediate
- BFD_RELOC_OR1K_GOT_LO13, low 13-bit page offset with GOT calcs
asm: gotpo()
- BFD_RELOC_OR1K_TLS_GD_LO13 Lower 13-bit offset with TLS GD calcs
asm: tlsgdpo()
- BFD_RELOC_OR1K_TLS_LDM_LO13 Lower 13-bit offset with TLS LD calcs
asm: tlsldmpo()
- BFD_RELOC_OR1K_TLS_IE_LO13 Lower 13-bit offset with TLS IE calcs
asm: gottppo()
bfd/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* bfd-in2.h: Regenerated.
* elf32-or1k.c: (or1k_elf_howto_table): Fix formatting for
R_OR1K_PLT26, Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21,
R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21,
R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13,
R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26.
(or1k_reloc_map): Add BFD_RELOC_OR1K_PCREL_PG21,
BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_TLS_GD_PG21,
BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_IE_PG21,
BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_GOT_LO13,
BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_GD_LO13,
BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_LO13,
BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_PLTA26.
(elf_or1k_link_hash_table): Add field saw_plta.
(or1k_final_link_relocate): Add value calculations for new relocations.
(or1k_elf_relocate_section): Add section relocations for new
relocations.
(or1k_write_plt_entry): New function.
(or1k_elf_finish_dynamic_sections): Add support for PLTA relocations
using new l.adrp instruction. Cleanup PLT relocation code generation.
* libbfd.h: Regenerated.
* reloc.c: Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_LO13,
BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_GOT_LO13,
BFD_RELOC_OR1K_PLTA26, BFD_RELOC_OR1K_TLS_GD_PG21,
BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21,
BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21,
BFD_RELOC_OR1K_TLS_IE_LO13.
cpu/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k.opc (parse_disp26): Add support for plta() relocations.
(parse_disp21): New function.
(or1k_rclass): New enum.
(or1k_rtype): New enum.
(or1k_imm16_relocs): Define new PO and SPO relocation mappings.
(parse_reloc): Add new po(), gotpo() and gottppo() for LO13 relocations.
(parse_imm16): Add support for the new 21bit and 13bit relocations.
* or1korbis.cpu (f-disp26): Don't assume SI.
(f-disp21): New pc-relative 21-bit 13 shifted to right.
(insn-opcode): Add ADRP.
(l-adrp): New instruction.
gas/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* config/tc-or1k.c (or1k_apply_fix): Add BFD_RELOC_OR1K_TLS_GD_PG21,
BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21,
BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21,
BFD_RELOC_OR1K_TLS_IE_LO13.
* testsuite/gas/or1k/allinsn.s: Add test for l.adrp.
* testsuite/gas/or1k/allinsn.d: Add test results for new
instructions.
* testsuite/gas/or1k/reloc-1.s: Add tests to generate
R_OR1K_PLTA26, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21,
R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13,
R_OR1K_TLD_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_LO13, R_OR1K_SLO13
relocations.
* testsuite/gas/or1k/reloc-1.d: Add relocation results for
tests.
* testsuite/gas/or1k/reloc-2.s: Add negative tests for store to
gotpo().
* testsuite/gas/or1k/reloc-2.l: Add expected error test results.
ld/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* testsuite/ld-or1k/or1k.exp: Add test cases for plt generation.
* testsuite/ld-or1k/plt1.dd: New file.
* testsuite/ld-or1k/plt1.s: New file.
* testsuite/ld-or1k/plt1.x.dd: New file.
* testsuite/ld-or1k/plta1.dd: New file.
* testsuite/ld-or1k/plta1.s: New file.
* testsuite/ld-or1k/pltlib.s: New file.
include/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_PCREL_PG21,
R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21,
R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13,
R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13,
R_OR1K_SLO13, R_OR1K_PLTA26.
opcodes/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k-asm.c: Regenerated.
* or1k-desc.c: Regenerated.
* or1k-desc.h: Regenerated.
* or1k-dis.c: Regenerated.
* or1k-ibld.c: Regenerated.
* or1k-opc.c: Regenerated.
* or1k-opc.h: Regenerated.
* or1k-opinst.c: Regenerated.
