* bfd-in.h: Define BFD_HOST_LONG_LONG. Test it rather than
__GNUC__ when deciding whether to use long long for
BFD_HOST_64_BIT.
* configure, Makefile.in, doc/Makefile.in, bfd-in2.h: Regenerate.
* mips.h (CPU_RM7000): New macro.
(OPCODE_IS_MEMBER): Match CPU_RM7000 against 4650 insns.
bfd/
* archures.c (bfd_mach_mips7000): New.
* bfd-in2.h: Regenerated.
* cpu-mips.c (arch_info_struct): Add an entry for mips:7000.
* elfxx-mips.c (mips_set_isa_flags): Handle bfd_mach_mips7000.
(mips_mach_extensions): Add an entry for it.
opcodes/
* mips-dis.c (mips_arch_choices): Add rm7000 and rm9000 entries.
gas/
* config/tc-mips.c (hilo_interlocks): True for CPU_RM7000.
(mips_cpu_info_table): Add rm7000 and rm9000 entries.
gas/testsuite/
* gas/mips/rm7000.[sd]: New test.
* gas/mips/mips.exp: Run it.
* bfd-in.h (bfd_h8300_pad_address): Declare.
* bfd-in2.h: Regenerate.
* cpu-h8300.c (bfd_h8300_pad_address): New function.
* coff-h8300.c (h8300_reloc16_estimate): Use it to canonicalize
addresses before checking whether they can be relaxed.
(h8300_reloc16_extra_cases): Likewise for the R_MOVL2 sanity check.
Don't complain about overflows in general 8-bit relocations.
* elf32-h8300.c (elf32_h8_relax_section): Use bfd_h8300_pad_address.
Fix handling of R_H8_DIR24A8.
ld/testsuite/
* ld-h8300/relax-3{.s,.d,-coff.d}: New test.
* ld-h8300/h8300.exp: Run it.
2003-06-17 H.J. Lu <hongjiu.lu@intel.com>
* section.c (struct sec): Put back kept_section.
(STD_SECTION): Put back kept_section initialization.
* bfd-in2.h: Regenerate.
* elflink.h (elf_link_input_bfd): Also check discarded linkonce
sections for relocateable output. Use kept_section to preserve
debug information discarded by linkonce.
ld/
2003-06-17 H.J. Lu <hongjiu.lu@intel.com>
* ldlang.c (section_already_linked): Put back assignment of
kept_section.
* elf.c (bfd_elf_bfd_from_remote_memory): New function.
* bfd-in.h: Declare it.
* bfd-in2.h: Regenerated.
* elfcode.h (NAME(_bfd_elf,bfd_from_remote_memory)): New function.
* elf-bfd.h (struct elf_backend_data): New function pointer member
elf_backend_bfd_from_remote_memory.
(_bfd_elf32_bfd_from_remote_memory, _bfd_elf64_bfd_from_remote_memory):
Declare them.
* elfxx-target.h (elf_backend_bfd_from_remote_memory): New macro.
(elfNN_bed): Add that to the initializer.
From Bernd Schmidt <bernds@redhat.com>
* archures.c (bfd_mach_h8300sx): New.
* bfd-in2.h: Regenerate.
* cpu-h8300.c (h8300_scan)): Add support for h8300sx.
(h8300sx_info_struct): New.
(h8300s_info_struct): Link to it.
* elf32-h8300.c (elf32_h8_mach): Add support for h8300sx.
(elf32_h8_final_write_processing): Likewise.
(elf32_h8_relax_section): Likewise.
parameter symbol_table. Optionally use it instead of the symbol
table from the bfd. Save and restore output offsets and output
sections around bfd_get_relocated_section_contents. Fix a memory
leak.
(simple_save_output_info, simple_restore_output_info): New
functions.
* bfd-in2.h: Regenerate.
* dwarf2.c (read_abbrevs): Use
bfd_simple_get_relocated_section_contents instead of
bfd_get_section_contents.
(decode_line_info): Likewise.
(_bfd_dwarf2_find_nearest_line): Likewise. Don't call
find_rela_addend.
(find_rela_addend): Remove.
* elfxx-ia64.c (elfNN_ia64_reloc): Weaken sanity check for
debugging sections.
(elfNN_ia64_hash_table_create): Create the hash table with malloc,
not bfd_zalloc.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
* elf64-ppc.c (TP_OFFSET, DTP_OFFSET): Declare.
(ppc64_elf_howto_raw): Add TLS howto's. Adjust R_PPC64_NONE to be
against a 32 bit field.
(ppc64_elf_reloc_type_lookup): Handle TLS relocs.
(_ppc64_elf_section_data): Add t_symndx and comments.
(ppc64_elf_section_data): Use elf_section_data macro.
(ppc64_elf_new_section_hook): American spelling.
(struct got_entry, struct plt_entry): New.
(MUST_BE_DYN_RELOC): Rename from IS_ABSOLUTE_RELOC.
(struct ppc_stub_hash_entry): Add "addend" field.
(struct ppc_link_hash_entry): Add "tls_type".
(TLS_TLS, TLS_GD_LD, TLS_LD, TLS_TPREL, TLS_DTPREL,
TLS_EXPLICIT): Define.
(struct ppc_link_hash_table): Add tls_sec, tls_get_addr, tlsld_got.
(link_hash_newfunc): Init new fields.
(ppc64_elf_link_hash_table_create): Likewise. Set init_relcount and
init_offset to NULL.
(ppc64_elf_copy_indirect_symbol): Copy got and plt info. Don't call
_bfd_elf_link_hash_copy_indirect, rather insert relevant code from
there.
(update_local_sym_info, update_plt_info): New functions.
(ppc64_elf_check_relocs): Use them. Handle TLS relocs. Adjust GOT
handling to use got.glist rather than got.refcount. Likewise for PLT.
(ppc64_elf_gc_sweep_hook): Handle TLS relocs, new GOT and PLT lists.
(func_desc_adjust): Adjust for new PLT list.
(ppc64_elf_adjust_dynamic_symbol): Likewise.
(get_sym_h, get_tls_type): New functions.
(ppc64_elf_edit_opd): Remove unused variable. Use get_sym_h.
(ppc64_elf_tls_optimize): New function.
(allocate_dynrelocs): Adjust for new PLT and GOT lists. Allocate
TLS relocs.
(ppc64_elf_size_dynamic_sections): Likewise.
(ppc_type_of_stub): Adjust for new PLT list.
(ppc_build_one_stub): Likewise.
(ppc64_elf_size_stubs): Likewise. Use get_sym_h. Treat __tls_get_addr
calls specially.
(ppc64_elf_relocate_section): Adjust for new GOT and PLT lists. Handle
TLS relocs. Report local syms using bfd_elf_local_sym_name. Don't
init GOT entries that have a reloc. Generate GOT relocs here..
(ppc64_elf_finish_dynamic_symbol): ..not here. Adjust for PLT list.
* elf64-ppc.h (ppc64_elf_tls_optimize): Declare.
* elf32-s390.c (elf_s390_adjust_gotplt): New prototype.
(elf_howto_table): Rename R_390_GOTOFF to R_390_GOTOFF32. Add
R_390_GOTOFF16, R_390_GOTOFF64, R_390_GOTPLT12, R_390_GOTPLT16,
R_390_GOTPLT32, R_390_GOTPLT64, R_390_GOTPLTENT, R_390_PLTOFF16,
R_390_PLTOFF32 and R_390_PLTOFF64.
(elf_s390_reloc_type_lookup): Likewise.
(struct elf_s390_link_hash_entry): Add gotplt_refcount to keep track
of GOTPLT references to a function.
(link_hash_newfunc): Initialize gotplt_refcount.
(elf_s390_check_relocs): Move allocation of local_got_refcounts array
and creation of the got section out of the main switch. Add support
for the gotoff, gotplt and pltoff relocations.
(elf_s390_gc_sweep_hook): Add reference counting for gotoff, gotplt
and pltoff.
(elf_s390_adjust_gotplt): New function.
(elf_s390_adjust_dynamic_symbol): Adjust gotplt refcount for removed
plt entries.
(allocate_dynrelocs): Add comment.
(elf_s390_relocate_section): Change r_type to unsigned. Add support
for gotoff, gotplt and pltoff relocations.
* elf64-s390.c: Same changes as for elf32-s390.c.
* libbfd.h: Regenerate.
* reloc.c: Add BFD_RELOC_390_GOTOFF64, BFD_RELOC_390_GOTPLT12,
BFD_RELOC_390_GOTPLT16, BFD_RELOC_390_GOTPLT32, BFD_RELOC_390_GOTPLT64,
BFD_RELOC_390_GOTPLTENT, BFD_RELOC_390_PLTOFF16, BFD_RELOC_390_PLTOFF32
and BFD_RELOC_390_PLTOFF64.
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* aoutx.h (NAME(aout,machine_type)): Add bfd_mach_mipsisa32r2 case.
* archures.c (bfd_mach_mipsisa32r2): New define.
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsisa32r2): New enum value.
(arch_info_struct): Add entry for I_mipsisa32r2.
* elfxx-mips.c (elf_mips_isa, _bfd_elf_mips_mach)
(_bfd_mips_elf_print_private_bfd_data): Handle E_MIPS_ARCH_32R2.
(_bfd_mips_elf_final_write_processing): Add
bfd_mach_mipsisa32r2 case.
(_bfd_mips_elf_merge_private_bfd_data): Handle merging of
binaries marked as using MIPS32 Release 2.
[ binutils/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* doc/binutils.texi (objdump): Note MIPS HWR (Hardware Register)
changes in MIPS -M options.
[ gas/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* configure.in: Recognize mipsisa32r2, mipsisa32r2el, and
CPU variants.
* configure: Regenerate.
* config/tc-mips.c (ISA_HAS_DROR, ISA_HAS_ROR): New defines.
(macro_build): Handle "K" operand.
(macro2): Use ISA_HAS_DROR and ISA_HAS_ROR in the places where
CPU_HAS_DROR and CPU_HAS_ROR are currently used.
(mips_ip): New variable "lastpos", and implement "+A", "+B",
and "+C" operands for MIPS32 Release 2 ins/ext instructions.
Implement "K" operand for MIPS32 Release 2 rdhwr instruction.
(validate_mips_insn): Implement "+" as a way to extend the
allowed operands, and implement "K", "+A", "+B", and "+C"
operands.
(OPTION_MIPS32R2): New define.
(md_longopts): Add entry for OPTION_MIPS32R2.
(OPTION_ELF_BASE): Adjust to accomodate OPTIONS_MIPS32R2.
(md_parse_option): Handle OPTION_MIPS32R2.
(s_mipsset): Reimplement handling of ".set mipsN" options
and add support for ".set mips32r2".
(mips_cpu_info_table): Add entry for "mips32r2" (MIPS32 Release 2).
(md_show_usage): Document "-mips32r2" option.
* doc/as.texinfo: Document "-mips32r2" option.
* doc/c-mips.texi: Likewise.
[ gas/testsuite/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0-names-mips32r2.d: New test.
* gas/mips/hwr-names-mips32r2.d: New test.
* gas/mips/hwr-names-numeric.d: New test.
* gas/mips/hwr-names.s: New test source file.
* gas/mips/mips32r2.d: New test.
* gas/mips/mips32r2.s: New test source file.
* gas/mips/mips32r2-ill.l: New test.
* gas/mips/mips32r2-ill.s: New test source file.
* gas/mips/mips.exp: Add mips32r2 architecture data array
entry. Run new tests mentioned above.
[ include/elf/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h (E_MIPS_ARCH_32R2): New define.
[ include/opcode/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h: Document "+" as the start of two-character operand
type names, and add new "K", "+A", "+B", and "+C" operand types.
(OP_MASK_INSMSB, OP_SH_INSMSB, OP_MASK_EXTMSB)
(OP_SH_EXTMSB, INSN_ISA32R2, ISA_MIPS32R2, CPU_MIPS32R2): New
defines.
[ opcodes/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0_names_mips3264r2, mips_hwr_names_numeric)
(mips_hwr_names_mips3264r2): New arrays.
(mips_arch_choice): New "hwr_names" member.
(mips_arch_choices): Adjust for structure change, and add a new
entry for "mips32r2" ISA.
(mips_hwr_names): New variable.
(set_default_mips_dis_options): Set mips_hwr_names.
(parse_mips_dis_option): New "hwr-names" option which sets
mips_hwr_names, and adjust "reg-names=ARCH" to set mips_hwr_names.
(print_insn_arg): Change return type to "int"
and use that to indicate number of characters consumed.
Add support for "+" operand extension character, "+A", "+B",
"+C", and "K" operands.
(print_insn_mips): Adjust for changes to print_insn_arg.
(print_mips_disassembler_options): Adjust for "hwr-names"
addition and "reg-names" change.
* mips-opc (I33): New define (shorthand for INSN_ISA32R2).
(mips_builtin_opcodes): Note that "nop" and "ssnop" are special
forms of "sll". Add new MIPS32 Release 2 instructions: ehb,
di, ei, ext, ins, jr.hb, jalr.hb, mfhc1, mfhc2, mthc1, mthc2,
rdhwr, rdpgpr, seb, seh, synci, wrpgpr, wsbh.
Note that hardware rotate instructions (ror, rorv) can be
used on MIPS32 Release 2, and add the official mnemonics
for them (rotr, rotrv) and the similar "rotl" mnemonic for
left-rotate.
