2021-11-26 John David Anglin <danglin@gcc.gnu.org>
PR ld/27442
ld/ChangeLog:
* ld/testsuite/ld-ifunc/ifunc.exp (contains_irelative_reloc): Adjust
regexp.
Skip static ifunc-using executable test on hppa*-*-*.
The test must be done with the shared object and not with the object
file which is already being tested above.
ld/
* testsuite/ld-elfvsb/elfvsb.exp: use .so file in "weak hidden
symbol DSO last"
This is the original discussion,
https://github.com/riscv/riscv-elf-psabi-doc/pull/190
And here is the glibc part,
https://sourceware.org/pipermail/libc-alpha/2021-August/129931.html
For binutils part, we need to support a new direcitve: .variant_cc.
The function symbol marked by .variant_cc means it need to be resolved
directly without resolver for dynamic linker. We also add a new dynamic
entry, STO_RISCV_VARIANT_CC, to indicate there are symbols with the
special attribute in the dynamic symbol table of the object.
I heard that llvm already have supported this in their mainline, so
I think it's time to commit this.
bfd/
* elfnn-riscv.c (riscv_elf_link_hash_table): Added variant_cc
flag. It is used to check if relocations for variant CC symbols
may be present.
(allocate_dynrelocs): If the symbol has STO_RISCV_VARIANT_CC
flag, then raise the variant_cc flag of riscv_elf_link_hash_table.
(riscv_elf_size_dynamic_sections): Added dynamic entry for
variant_cc.
(riscv_elf_merge_symbol_attribute): New function, used to merge
non-visibility st_other attributes, including STO_RISCV_VARIANT_CC.
binutils/
* readelf.c (get_riscv_dynamic_type): New function.
(get_dynamic_type): Called get_riscv_dynamic_type for riscv targets.
(get_riscv_symbol_other): New function.
(get_symbol_other): Called get_riscv_symbol_other for riscv targets.
gas/
* config/tc-riscv.c (s_variant_cc): Marked symbol that it follows a
variant CC convention.
(riscv_elf_copy_symbol_attributes): Same as elf_copy_symbol_attributes,
but without copying st_other. If a function symbol has special st_other
value set via directives, then attaching an IFUNC resolver to that symbol
should not override the st_other setting.
(riscv_pseudo_table): Support variant_cc diretive.
* config/tc-riscv.h (OBJ_COPY_SYMBOL_ATTRIBUTES): Defined.
* testsuite/gas/riscv/variant_cc-set.d: New testcase.
* testsuite/gas/riscv/variant_cc-set.s: Likewise.
* testsuite/gas/riscv/variant_cc.d: Likewise.
* testsuite/gas/riscv/variant_cc.s: Likewise.
include/
* elf/riscv.h (DT_RISCV_VARIANT_CC): Defined to (DT_LOPROC + 1).
(STO_RISCV_VARIANT_CC): Defined to 0x80.
ld/
* testsuite/ld-riscv-elf/variant_cc-1.s: New testcase.
* testsuite/ld-riscv-elf/variant_cc-2.s: Likewise.
* testsuite/ld-riscv-elf/variant_cc-now.d: Likewise.
* testsuite/ld-riscv-elf/variant_cc-r.d: Likewise.
* testsuite/ld-riscv-elf/variant_cc-shared.d: Likewise.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
ld/
* testsuite/ld-aarch64/dt_textrel.d: Pass explicit -z notext in
case ld was configured with --enable-textrel-check=error.
* testsuite/ld-aarch64/pr22764.d: Likewise.
* testsuite/ld-aarch64/pr20402.d: Likewise.
R_PPC64_REL24_P9NOTOC is a variant of R_PPC64_REL24_NOTOC for use on
@notoc cals from non-power10 code in the rare case that using such a
construct is useful. R_PPC64_REL24_P9NOTOC will be emitted by gas
rather than R_PPC64_REL24_NOTOC when @notoc is used in a branch
instruction if power10 instructions are not enabled at that point.
The new relocation tells the linker to not use power10 instructions on
any stub emitted for that branch, unless overridden by
--power10-stubs=yes.
The current linker heuristic of only generating power10 instructions
for stubs if power10-only relocations are detected, continues to be
used.
include/
* elf/ppc64.h (R_PPC64_REL24_P9NOTOC): Define.
bfd/
* reloc.c (BFD_RELOC_PPC64_REL24_P9NOTOC): Define.
* elf64-ppc.c (ppc64_elf_howto_raw): Add entry for new reloc.
(ppc64_elf_reloc_type_lookup): Handle it.
(enum ppc_stub_type): Delete.
(enum ppc_stub_main_type, ppc_stub_sub_type): New.
(struct ppc_stub_type): New.
(struct ppc_stub_hash_entry): Use the above new type.
(struct ppc_link_hash_table): Update stub_count.
(is_branch_reloc, ppc64_elf_check_relocs),
(toc_adjusting_stub_needed): Handle new reloc.
(stub_hash_newfunc, select_alt_stub, ppc_merge_stub),
(ppc_type_of_stub, plt_stub_size, build_plt_stub),
(build_tls_get_addr_head, build_tls_get_addr_tail),
(ppc_build_one_stub, ppc_size_one_stub, ppc64_elf_size_stubs),
(ppc64_elf_build_stubs, ppc64_elf_relocate_section): Handle new
reloc. Modify stub handling to suit new scheme.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): When power10 is not enabled
return BFD_RELOC_PPC64_REL24_P9NOTOC for @notoc.
(fixup_size, ppc_force_relocation, ppc_fix_adjustable): Handle
BFD_RELOC_PPC64_REL24_P9NOTOC.
ld/
* testsuite/ld-powerpc/callstub-2.s: Add .machine power10.
Previous flags were aimed to be run with XLC.
Nowadays, only GCC is being tested with GNU toolchain. Moreover,
recent XLC versions might also accept "-shared".
* testsuite/ld-shared/shared.exp: Adjust shared flags.
ctf_type_visit (used, among other things, by the type dumping code) was
aborting when it saw a nonrepresentable type anywhere: even a single
structure member with a nonrepresentable type caused an abort with
ECTF_NONREPRESENTABLE. This is not useful behaviour, given that the
abort comes from a type-resolution we are only doing in order to
determine whether the type is a structure or union. We know
nonrepresentable types can't be either, so handle that case and
pass the nonrepresentable type down.
(The added test verifies that the dumper now handles this case and
prints nonrepresentable structure members as it already does
nonrepresentable top-level types, rather than skipping the whole
structure -- or, without the previous commit, skipping the whole types
section.)
ld/ChangeLog
2021-10-25 Nick Alcock <nick.alcock@oracle.com>
* testsuite/ld-ctf/nonrepresentable-member.*: New test.
libctf/ChangeLog
2021-10-25 Nick Alcock <nick.alcock@oracle.com>
* ctf-types.c (ctf_type_rvisit): Handle nonrepresentable types.
Consider the the pcgp-relax-02 testcase,
.text
.globl _start
_start:
.L1: auipc a0, %pcrel_hi(data_a)
.L2: auipc a1, %pcrel_hi(data_b)
addi a0, a0, %pcrel_lo(.L1)
addi a1, a1, %pcrel_lo(.L2)
.data
.word 0x0
.globl data_a
data_a:
.word 0x1
.section .rodata
.globl data_b
data_b:
.word 0x2
If the first auipc is deleted, but we are still building the pcgp
table (connect the high and low pcrel relocations), then there is
an aliasing issue that we need some way to disambiguate which of
the two symbols we are targeting. Therefore, Palmer thought of a
way to use R_RISCV_DELETE to split this into two phases, so we
could resolve the addresses before creating the ambiguities.
This patch just add the ld testcase for the above case, in case we
have changed something but break this.
ld/
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Renamed pcgp-relax
to pcgp-relax-01, and added pcgp-relax-02.
* testsuite/ld-riscv-elf/pcgp-relax-01.d: Renmaed from pcgp-relax.
* testsuite/ld-riscv-elf/pcgp-relax-01.s: Likewise.
* testsuite/ld-riscv-elf/pcgp-relax-02.d: New testcase.
* testsuite/ld-riscv-elf/pcgp-relax-02.s: Likewise.
Commit abd20cb637 and
ebdcad3fdd introduced additional
complexity into the paths run by the RISC-V relaxation pass in order to
resolve the issue of accurately keeping track of pcrel_hi and pcrel_lo
pairs. The first commit split up relaxation of these relocs into a pass
which occurred after other relaxations in order to prevent the situation
where bytes were deleted in between a pcrel_lo/pcrel_hi pair, inhibiting
our ability to find the corresponding pcrel_hi relocation from the
address attached to the pcrel_lo.
Since the relaxation was split into two passes the 'again' parameter
could not be used to perform the entire relaxation process again and so
the second commit added a way to restart ldelf_map_segments, thus
starting the whole process again.
Unfortunately this process could not account for the fact that we were
not finished with the relaxation process so in some cases - such as the
case where code would not fit in a memory region before the
R_RISCV_ALIGN relocation was relaxed - sanity checks in generic code
would fail.
This patch fixes all three of these concerns by reverting back to a
system of having only one target relax pass but updating entries in the
table of pcrel_hi/pcrel_lo relocs every time any bytes are deleted. Thus
we can keep track of the pairs accurately, and we can use the 'again'
parameter to restart the entire target relax pass, behaving in the way
that generic code expects. Unfortunately we must still have an
additional pass to delay deleting AUIPC bytes to avoid ambiguity between
pcrel_hi relocs stored in the table after deletion. This pass can only
be run once so we may potentially miss out on relaxation opportunities
but this is likely to be rare.
https://sourceware.org/bugzilla/show_bug.cgi?id=28410
bfd/
* elfnn-riscv.c (riscv_elf_link_hash_table): Removed restart_relax.
(riscv_elf_link_hash_table_create): Updated.
(riscv_relax_delete_bytes): Moved after the riscv_update_pcgp_relocs.
Update the pcgp_relocs table whenever bytes are deleted.
(riscv_update_pcgp_relocs): Add function to update the section
offset of pcrel_hi and pcrel_lo, and also update the symbol value
of pcrel_hi.
(_bfd_riscv_relax_call): Need to update the pcgp_relocs table
when deleting codes.
(_bfd_riscv_relax_lui): Likewise.
(_bfd_riscv_relax_tls_le): Likewise.
(_bfd_riscv_relax_align): Once we've handled an R_RISCV_ALIGN,
we can't relax anything else, so set the sec->sec_flg0 to true.
Besides, we don't need to update the pcgp_relocs table at this
stage, so just pass NULL pointer as the pcgp_relocs table for
riscv_relax_delete_bytes.
(_bfd_riscv_relax_section): Use only one pass for all target
relaxations.
(_bfd_riscv_relax_delete): Likewise, we don't need to update
the pcgp_relocs table at this stage, and don't need to set
the `again' since restart_relax mechanism is abandoned.
(bfd_elfNN_riscv_restart_relax_sections): Removed.
(_bfd_riscv_relax_section): Updated.
* elfxx-riscv.h (bfd_elf32_riscv_restart_relax_sections): Removed.
(bfd_elf64_riscv_restart_relax_sections): Likewise.
ld/
* emultempl/riscvelf.em: Revert restart_relax changes and set
relax_pass to 3.
* testsuite/ld-riscv-elf/align-small-region.d: New testcase.
* testsuite/ld-riscv-elf/align-small-region.ld: Likewise.
* testsuite/ld-riscv-elf/align-small-region.s: Likewise.
* testsuite/ld-riscv-elf/restart-relax.d: Removed sine the
restart_relax mechanism is abandoned.
* testsuite/ld-riscv-elf/restart-relax.s: Likewise.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
Adjust pr28158.rd for glibc 2.34:
$ readelf -W --dyn-syms tmpdir/pr28158
Symbol table '.dynsym' contains 4 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 FUNC GLOBAL DEFAULT UND __libc_start_main@GLIBC_2.34 (2)
2: 0000000000000000 0 NOTYPE WEAK DEFAULT UND __gmon_start__
3: 000000000040401c 4 OBJECT GLOBAL DEFAULT 23 foo@VERS_2.0 (3)
$
vs older glibc:
$ readelf -W --dyn-syms tmpdir/pr28158
Symbol table '.dynsym' contains 4 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 FUNC GLOBAL DEFAULT UND __libc_start_main@GLIBC_2.2.5 (3)
2: 0000000000000000 0 NOTYPE WEAK DEFAULT UND __gmon_start__
3: 000000000040401c 4 OBJECT GLOBAL DEFAULT 23 foo@VERS_2.0 (2)
$
* testsuite/ld-elf/pr28158.rd: Adjusted for glibc 2.34.
Don't set version info on unversioned symbols when seeing a hidden
versioned symbol after an unversioned definition and the default
versioned symbol.
bfd/
PR ld/28348
* elflink.c (elf_link_add_object_symbols): Don't set version info
on unversioned symbols.
ld/
PR ld/28348
* testsuite/ld-elf/pr28348.rd: New file.
* testsuite/ld-elf/pr28348.t: Likewise.
* testsuite/ld-elf/pr28348a.c: Likewise.
* testsuite/ld-elf/pr28348b.c: Likewise.
* testsuite/ld-elf/pr28348c.c: Likewise.
* testsuite/ld-elf/shared.exp: Run PR ld/28348 tests.
When statically linking, it can arrive to an undefined weak symbol of
which its value cannot be determined. However, we are having pieces of
code which doesn't take this situation into account, leading to access
a structure which may not be initialized. Fix this situation and add a
test.
bfd/
xxxx-xx-xx Cupertino Miranda <cmiranda@synopsys.com>
Claudiu Zissulescu <claziss@synopsys.com>
* arc-got.h (arc_static_sym_data): New structure.
(get_static_sym_data): New function.
(relocate_fix_got_relocs_for_got_info): Move the computation fo
symbol value and section to above introduced function, and use
this new function.
ld/testsuite/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* ld-arc/got-weak.d: New file.
* ld-arc/got-weak.s: Likewise.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
fix
Fixes a few issues:
1) If you use "-fsanitize=address,undefined" in CFLAGS, the Makefile
attempt to trim off -fsanitize options left us with ",undefined".
2) ld_compile adds CFLAGS_FOR_TARGET itself, no need to pass it.
3) CFLAGS might be needed linking bootstrap test.
* Makefile.am (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Trim off
all -fsanitize=*.
* Makefile.in: Regenerate.
* testsuite/ld-bootstrap/bootstrap.exp: Use CFLAGS when linking.
* testsuite/ld-cdtest/cdtest.exp: Use CFLAGS_FOR_TARGET when
linking.
* testsuite/ld-auto-import/auto-import.exp: Don't pass
CFLAGS_FOR_TARGET to ld_compile.
* testsuite/ld-cygwin/exe-export.exp: Likewise.
* testsuite/ld-elfvers/vers.exp: Likewise.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-pe/pe-compile.exp: Likewise.
* testsuite/ld-pe/pe-run.exp: Likewise.
* testsuite/ld-pe/pe-run2.exp: Likewise.
* testsuite/ld-plugin/plugin.exp: Likewise.
* testsuite/ld-shared/shared.exp: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Likewise, and don't allow
nios2 testing to trash CFLAGS_FOR_TARGET.
* testsuite/ld-scripts/crossref.exp: Don't pass options in
CC_FOR_TARGET, do so in CFLAGS_FOR_TARGET instead.
* testsuite/ld-srec/srec.exp: Likewise, and for CXX.
The top level Makefile, the ld Makefile and others, define
CC_FOR_TARGET to be a compiler for the binutils target machine. This
is the compiler that should be used for almost all tests with C
source. There are _FOR_TARGET versions of CFLAGS, CXX, and CXXFLAGS
too. This was all supposed to work with the testsuite .exp files
using CC for the target compiler, and CC_FOR_HOST for the host
compiler, with the makefiles passing CC=$CC_FOR_TARGET and
CC_FOR_HOST=$CC to the runtest invocation.
One exception to the rule of using CC_FOR_TARGET is the native-only ld
bootstrap test, which uses the newly built ld to link a copy of
itself. Since the files being linked were created with the host
compiler, the boostrap test should use CC and CFLAGS, in case some
host compiler option provides needed libraries automatically.
However, bootstrap.exp used CC where it should have used CC_FOR_HOST.
I set about fixing that problem, then decided that playing games in
the makefiles with CC was a bad idea. Not only is it confusing, but
other dejagnu code knows about CC_FOR_TARGET. See dejagnu/target.exp.
So this patch gets rid of the makefile variable renaming and changes
all the .exp files to use the correct _FOR_TARGET variables.
CC_FOR_HOST and CFLAGS_FOR_HOST disappear. A followup patch will
correct bootstrap.exp to use CFLAGS, and a number of other things I
noticed.
binutils/
* testsuite/lib/binutils-common.exp (run_dump_test): Use
CC_FOR_TARGET and CFLAGS_FOR_TARGET rather than CC and CFLAGS.
ld/
* Makefile.am (check-DEJAGNU): Don't set CC to CC_FOR_TARGET
and similar. Pass variables with unchanged names. Don't set
CC_FOR_HOST or CFLAGS_FOR_HOST.
* Makefile.in: Regenerate.
* testsuite/config/default.exp: Update default CC and similar.
(compiler_supports, plug_opt): Use CC_FOR_TARGET.
* testsuite/ld-cdtest/cdtest.exp: Replace all uses of CC with
CC_FOR_TARGET, and similarly for CFLAGS, CXX and CXXFLAGS.
* testsuite/ld-auto-import/auto-import.exp: Likewise.
* testsuite/ld-cygwin/exe-export.exp: Likewise.
* testsuite/ld-elf/dwarf.exp: Likewise.
* testsuite/ld-elf/indirect.exp: Likewise.
* testsuite/ld-elf/shared.exp: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Likewise.
* testsuite/ld-elfvers/vers.exp: Likewise.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Likewise.
* testsuite/ld-mn10300/mn10300.exp: Likewise.
* testsuite/ld-pe/pe-compile.exp: Likewise.
* testsuite/ld-pe/pe-run.exp: Likewise.
* testsuite/ld-pe/pe-run2.exp: Likewise.
* testsuite/ld-pie/pie.exp: Likewise.
* testsuite/ld-plugin/lto.exp: Likewise.
* testsuite/ld-plugin/plugin.exp: Likewise.
* testsuite/ld-scripts/crossref.exp: Likewise.
* testsuite/ld-selective/selective.exp: Likewise.
* testsuite/ld-sh/sh.exp: Likewise.
* testsuite/ld-shared/shared.exp: Likewise.
* testsuite/ld-srec/srec.exp: Likewise.
* testsuite/ld-undefined/undefined.exp: Likewise.
* testsuite/ld-unique/unique.exp: Likewise.
* testsuite/ld-x86-64/tls.exp: Likewise.
* testsuite/lib/ld-lib.exp: Likewise.
libctf/
* Makefile.am (check-DEJAGNU): Don't set CC to CC_FOR_TARGET.
Pass CC and CC_FOR_TARGET. Don't set CC_FOR_HOST.
* Makefile.in: Regenerate.
* testsuite/config/default.exp: Update default CC and similar.
* testsuite/lib/ctf-lib.exp (run_native_host_cmd): Use CC rather
than CC_FOR_HOST.
(run_lookup_test): Use CC_FOR_TARGET and CFLAGS_FOR_TARGET.
It turns out we do need to backtrack when parsing after all. The
fill_opt component in the section rule swiches to EXPRESSION and back
to SCRIPT, and to find the end of an expression it is necessary to
look ahead one token.
* ldgram.y (section): Throw away lookahead NAME token.
(overlay_section): Likewise.
* testsuite/ld-elf/overlay.t: Add fill pattern on overlays.
Test fill pattern before stupidly named normal sections too,
and before /DISCARD/.
I think these happened by accident, so let's see what breaks if they
are removed.
* ldlex.l: Remove lower case "absolute" and "sizeof_headers"
in non-mri mode.
* ld.texi: Remove sizeof_headers index.
* testsuite/ld-mmix/mmohdr1.ld: Use SIZEOF_HEADERS.
As discussed previously, a.out support is now quite deprecated, and in
some cases removed, in both Binutils itself and NetBSD, so this legacy
default makes little sense. `netbsdelf*` and `netbsdaout*` still work
allowing the user to be explicit about there choice. Additionally, the
configure script warns about the change as Nick Clifton requested.
One possible concern was the status of NetBSD on NS32K, where only a.out
was supported. But per [1] NetBSD has removed support, and if it were to
come back, it would be with ELF. The binutils implementation is
therefore marked obsolete, per the instructions in the last message.
With that patch and this one applied, I have confirmed the following:
--target=i686-unknown-netbsd
--target=i686-unknown-netbsdelf
builds completely
--target=i686-unknown-netbsdaout
properly fails because target is deprecated.
--target=vax-unknown-netbsdaout builds completely except for gas, where
the target is deprecated.
[1]: https://mail-index.netbsd.org/tech-toolchain/2021/07/19/msg004025.html
---
bfd/config.bfd | 43 +++++++++++++--------
bfd/configure.ac | 5 +--
binutils/testsuite/binutils-all/nm.exp | 2 +-
binutils/testsuite/lib/binutils-common.exp | 7 +---
config/picflag.m4 | 4 +-
gas/configure.tgt | 9 +++--
gas/testsuite/gas/arm/blx-bl-convert.d | 2 +-
gas/testsuite/gas/arm/blx-local-thumb.d | 2 +-
gas/testsuite/gas/sh/basic.exp | 2 +-
gdb/configure.host | 34 +++++++----------
gdb/configure.tgt | 2 +-
gdb/testsuite/gdb.asm/asm-source.exp | 6 +--
intl/configure | 2 +-
ld/configure.tgt | 44 +++++++++++-----------
ld/testsuite/ld-arm/arm-elf.exp | 4 +-
ld/testsuite/ld-elf/elf.exp | 2 +-
ld/testsuite/ld-elf/shared.exp | 4 +-
libiberty/configure | 4 +-
Close the file descriptor if there is no archive plugin file descriptor
to avoid running out of file descriptors on thin archives with many
archive members.
bfd/
PR ld/28138
* plugin.c (bfd_plugin_close_file_descriptor): Close the file
descriptor there is no archive plugin file descriptor.
ld/
PR ld/28138
* testsuite/ld-plugin/lto.exp: Run ld/28138 tests.
* testsuite/ld-plugin/pr28138.c: New file.
* testsuite/ld-plugin/pr28138-1.c: Likewise.
* testsuite/ld-plugin/pr28138-2.c: Likewise.
* testsuite/ld-plugin/pr28138-3.c: Likewise.
* testsuite/ld-plugin/pr28138-4.c: Likewise.
* testsuite/ld-plugin/pr28138-5.c: Likewise.
* testsuite/ld-plugin/pr28138-6.c: Likewise.
* testsuite/ld-plugin/pr28138-7.c: Likewise.
Commit 40726f16a8 broke references to sections within ADDR(), and
overlays with weird section names.
* ldgram.y (paren_script_name): New rule.
(exp): Use it for ALIGNOF, SIZEOF, ADDR, and LOADADDR. Similarly
ensure script mode parsing for section name in SEGMENT_START.
(overlay_section): Delete unnecessary ldlex_script call. Backup
on a lookahead NAME parsed in expression mode.
* testsuite/ld-elf/overlay.s: Add more sections.
* testsuite/ld-elf/overlay.t: Test '-' in section names.
* ld.texi: Document new output section type.
* ldgram.y: Add new token.
* ldlang.c: Handle the new flag.
* ldlang.h: Add readonly_section to list of section types.
* ldlex.l: Add a new identifier.
* testsuite/ld-scripts/output-section-types.t: New example linker script.
* testsuite/ld-scripts/output-section-types.d: Test driver.
* testsyute/ld-scripts/script.exp: Run the new test.
netbsdpe was deprecated in c2ce831330.
Since then, a release has passed (2.37), and it was marked obselete in
5c9cbf07f3. Unless I am mistaken, that
means we can now remove support altogether.
All branches in the "active" code are remove, and the target is
additionally marked as obsolete next to the other removed ones for
libbfd and gdb.
Per [1] from the NetBSD toolchain list, PE/COFF support was removed a
decade ago. Furthermore, the sole mention of this target in the binutils
commit history was in 2002. Together, I'm led to believe this target
hasn't seen much attention in quite a while.
[1]: https://mail-index.netbsd.org/tech-toolchain/2021/06/16/msg003996.html
bfd/
* config.bfd: Remove netbsdpe entry.
binutils/
* configure.ac: Remove netbsdpe entry.
* testsuite/lib/binutils-common.exp (is_pecoff_format): Likewise.
* configure: Regenerate.
gas/
* configure.tgt: Remove netbsdpe entry.
gdb/
* configure.tgt: Add netbsdpe to removed targets.
ld/
* configure.tgt: Remove netbsdpe entry.
* testsuite/ld-bootstrap/bootstrap.exp: Likewise.
Run property-1_needed-1b.d and property-1_needed-1c.d, which pass
-z [no]indirect-extern-access to linker, only run for Linux/x86 targets.
* testsuite/ld-elf/property-1_needed-1b.d: Only run for
Linux/x86 targets.
* testsuite/ld-elf/property-1_needed-1c.d: Likewise.
If GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS is set on any input
relocatable files:
1. Don't generate copy relocations.
2. Turn off extern_protected_data since it implies
GNU_PROPERTY_NO_COPY_ON_PROTECTED.
3. Treate reference to protected symbols with indirect external access
as local.
4. Set GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS on output.
5. When generating executable, clear this bit when there are non-GOT or
non-PLT relocations in input relocatable files without the bit set.
6. Add -z [no]indirect-extern-access to control indirect external access.
bfd/
* elf-bfd (elf_obj_tdata): Add has_indirect_extern_access.
(elf_has_indirect_extern_access): New.
* elf-properties.c (_bfd_elf_parse_gnu_properties): Set
elf_has_indirect_extern_access and elf_has_no_copy_on_protected
when seeing GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS.
(elf_write_gnu_propertie): Add an argument to pass link_info.
Set needed_1_p for GNU_PROPERTY_1_NEEDED in memory.
(_bfd_elf_link_setup_gnu_properties): Handle
GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS for
-z indirect-extern-access. Set nocopyreloc to true and
extern_protected_data to false for indirect external access.
(_bfd_elf_convert_gnu_properties): Updated.
* elf32-i386.c (elf_i386_check_relocs): Set
non_got_ref_without_indirect_extern_access on legacy non-GOT or
non-PLT references.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
* elflink.c (_bfd_elf_symbol_refs_local_p): Return true for
STV_PROTECTED symbols with indirect external access.
* elfxx-x86.c (_bfd_x86_elf_adjust_dynamic_symbol): Clear
indirect_extern_access for legacy non-GOT/non-PLT references.
* elfxx-x86.h (elf_x86_link_hash_entry): Add
non_got_ref_without_indirect_extern_access.
include/
* bfdlink.h (bfd_link_info): Add indirect_extern_access and
needed_1_p. Change nocopyreloc to int.
ld/
* NEWS: Mention -z [no]indirect-extern-access
* ld.texi: Document -z [no]indirect-extern-access
* ldmain.c (main): Initialize link_info.indirect_extern_access
to -1.
* emulparams/extern_protected_data.sh: Support
-z [no]indirect-extern-access.
* testsuite/ld-elf/indirect-extern-access-1.rd: New file
* testsuite/ld-elf/indirect-extern-access-1a.c: Likewise.
* testsuite/ld-elf/indirect-extern-access-1b.c: Likewise.
* testsuite/ld-elf/indirect-extern-access-2.rd: Likewise.
* testsuite/ld-elf/indirect-extern-access-2a.c: Likewise.
* testsuite/ld-elf/indirect-extern-access-2b.c: Likewise.
* testsuite/ld-elf/indirect-extern-access-3.rd: Likewise.
* testsuite/ld-elf/indirect-extern-access.S: Likewise.
* testsuite/ld-elf/property-1_needed-1b.d: Likewise.
* testsuite/ld-elf/property-1_needed-1c.d: Likewise.
* testsuite/ld-x86-64/indirect-extern-access.rd: Likewise.
* testsuite/ld-x86-64/protected-data-1.h: Likewise.
* testsuite/ld-x86-64/protected-data-1a.c: Likewise.
* testsuite/ld-x86-64/protected-data-1b.c: Likewise.
* testsuite/ld-x86-64/protected-data-2a.S: Likewise.
* testsuite/ld-x86-64/protected-data-2b.S: Likewise.
* testsuite/ld-x86-64/protected-func-2a.S: Likewise.
* testsuite/ld-x86-64/protected-func-2b.S: Likewise.
* testsuite/ld-x86-64/protected-func-2c.c: Likewise.
* testsuite/ld-elf/linux-x86.exp: Run test with
GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS.
* testsuite/ld-x86-64/x86-64.exp: Run tests for protected
function and data with indirect external access.
Add GNU_PROPERTY_1_NEEDED:
#define GNU_PROPERTY_1_NEEDED GNU_PROPERTY_UINT32_OR_LO
to indicate the needed properties by the object file.
Add GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS:
#define GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS (1U << 0)
to indicate that the object file requires canonical function pointers and
cannot be used with copy relocation.
binutils/
* readelf.c (decode_1_needed): New.
(print_gnu_property_note): Handle GNU_PROPERTY_1_NEEDED.
include/
* elf/common.h (GNU_PROPERTY_1_NEEDED): New.
(GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS): Likewise.
ld/
* testsuite/ld-elf/property-1_needed-1a.d: New file.
* testsuite/ld-elf/property-1_needed-1.s: Likewise.
Disallow PC relocations against weak undefined symbols in PIE since they
can lead to non-zero address at run-time.
bfd/
PR ld/21782
* elf64-x86-64.c (elf_x86_64_relocate_section): Disallow PC
relocations against weak undefined symbols in PIE.
ld/
PR ld/21782
* testsuite/ld-x86-64/pie3.d: Expect linker error.
When link_info.keep_memory is true, linker caches the relocation
information and symbol tables of input files in memory. When there
are many input files with many relocations, we may run out of memory.
Add --max-cache-size=SIZE to set the maximum cache size.
bfd/
PR ld/18028
* bfd.c (bfd): Add alloc_size.
* elf-bfd.h (_bfd_elf_link_info_read_relocs): New.
* elf32-i386.c (elf_i386_check_relocs): Use _bfd_link_keep_memory.
Update cache_size.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
* elflink.c (_bfd_elf_link_read_relocs): Renamed to ...
(_bfd_elf_link_info_read_relocs): This. Update cache_size.
(_bfd_elf_link_read_relocs): New.
(_bfd_elf_link_check_relocs): Call _bfd_elf_link_info_read_relocs
instead of _bfd_elf_link_read_relocs.
(elf_link_add_object_symbols): Likewise.
(elf_link_input_bfd): Likewise.
(init_reloc_cookie_rels): Likewise.
(init_reloc_cookie): Update cache_size. Call
_bfd_elf_link_info_read_relocs instead of
_bfd_elf_link_read_relocs.
(link_info_ok): New.
(elf_gc_smash_unused_vtentry_relocs): Updated. Call
_bfd_elf_link_info_read_relocs instead of
_bfd_elf_link_read_relocs.
(bfd_elf_gc_sections): Use link_info_ok. Pass &link_info_ok
to elf_gc_smash_unused_vtentry_relocs.
* libbfd-in.h (_bfd_link_keep_memory): New.
* linker.c (_bfd_link_keep_memory): New.
* opncls.c (bfd_alloc): Update alloc_size.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
include/
PR ld/18028
* bfdlink.h (bfd_link_info): Add cache_size and max_cache_size.
ld/
PR ld/18028
* NEWS: Mention --max-cache-size=SIZE.
* ld.texi: Document --max-cache-size=SIZE.
* ldlex.h (option_values): Add OPTION_MAX_CACHE_SIZE.
* ldmain.c: (main): Set link_info.max_cache_size to -1.
* lexsup.c (ld_options): Add --max-cache-size=SIZE.
(parse_args): Support OPTION_MAX_CACHE_SIZE.
* testsuite/ld-bootstrap/bootstrap.exp: Add test for
--max-cache-size=-1.
the fix for PR22756 only changed behaviour for hidden aliases,
but the same situation exists for non-hidden aliases: sym_hashes[]
can contain multiple entries pointing to the same symbol structure
leading to relaxation adjustment to be applied twice.
Fix this by testing for duplicates for everything that looks like it
has a version.
PR ld/28021
bfd/
* elfnn-riscv.c (riscv_relax_delete_bytes): Check for any
versioning.
ld/
* testsuite/ld-riscv-elf/relax-twice.ver: New.
* testsuite/ld-riscv-elf/relax-twice-1.s: New.
* testsuite/ld-riscv-elf/relax-twice-2.s: New.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp
(run_relax_twice_test): New, and call it.
Linker plugin_object_p opens the IR archive for each IR archive member.
For GCC plugin, plugin_object_p closes the archive file descriptor. But
for LLVM plugin, the archive file descriptor remains open. If there are
3000 IR archive members, there are 3000 file descriptors for them. We
can run out of file descriptors petty easily.
1. Add archive_plugin_fd and archive_plugin_fd_open_count to bfd so that
we can cache and reuse the IR archive file descriptor for all IR archive
members in the archive.
2. Add bfd_plugin_close_file_descriptor to properly close the IR archive
file descriptor.
bfd/
PR ld/28040
* archive.c (_bfd_archive_close_and_cleanup): Close the archive
plugin file descriptor if needed.
* bfd.c (bfd): Add archive_plugin_fd and
archive_plugin_fd_open_count.
* opncls.c (_bfd_new_bfd): Initialize to -1.
* plugin.c (bfd_plugin_open_input): Cache and reuse the archive
plugin file descriptor.
(bfd_plugin_close_file_descriptor): New function.
(try_claim): Call bfd_plugin_close_file_descriptor.
* plugin.h (bfd_plugin_close_file_descriptor): New.
* bfd-in2.h: Regenerated.
ld/
PR ld/28040
* plugin.c (plugin_input_file): Add ibfd.
(release_plugin_file_descriptor): New function.
(release_input_file): Call release_plugin_file_descriptor to
close input->fd.
(plugin_object_p): Call release_plugin_file_descriptor to close
input->fd. Also call release_plugin_file_descriptor if not
claimed.
* testsuite/config/default.exp (RANLIB): New.
* testsuite/ld-plugin/lto.exp: Run ranlib test.
The original discussion was here,
https://github.com/riscv/riscv-elf-psabi-doc/issues/184
After discussing with Kito Cheng, I think the addends of %pcrel_hi
and %pcrel_lo are both allowed in GNU toolchain. However, both of
the them mean the offset of symbols, rather than the pc address.
But the addends of %got_pcrel_hi and it's %pcrel_lo do not look
reasonable. I believe gcc won't generate the got patterns with
addends, so linker should report dangerous relocation errors,
in case the assembly code use them.
Another issue was here,
https://sourceware.org/pipermail/binutils/2021-June/116983.html
At the beginnig, I suppose %pcrel_hi and %pcrel_lo are valid only
when they are in the same input section. But Jim Wilson points out
that gcc may generate %hi and %lo in the different input sections,
when -freorder-blocks-and-partition option is used. So that a memory
references for a loop may have the %hi outside the loop, but the %lo
remain in the loop. However, it is hard to create the testcases,
to see if %pcrel_hi and %pcrel_lo have the same behavior.
Unfortunately, I notice that the current pcrel resolver cannot
work for the above case. For now we build a hash table for pcrel
at the start of riscv_elf_relocate_section, and then free the hash
at the end. But riscv_elf_relocate_section only handles an input
section at a time, so that means we can only resolve the %pcrel_hi
and %pcrel_lo which are in the same input section. Otherwise, like
the above case, we will report "%pcrel_lo missing matching %pcrel_hi"
for them. I have no plan to improve this in the short-term, so maybe
we can wait until someone meets the problem before we deal with it.
bfd/
* elfnn-riscv.c (riscv_pcrel_hi_reloc): Added field to store
the original relocation type, in case the type is converted to
R_RISCV_HI20.
(riscv_pcrel_lo_reloc): Removed unused name field.
(riscv_pcrel_relocs): Added comments.
(riscv_zero_pcrel_hi_reloc): Removed unused input_bfd.
(riscv_record_pcrel_hi_reloc): Updated.
(riscv_record_pcrel_lo_reloc): Likewise.
(riscv_resolve_pcrel_lo_relocs): Likewise. Check the original
type of auipc, to make sure the %pcrel_lo without any addends.
Otherwise, report dangerous relocation error.
(riscv_elf_relocate_section): Updated above functions are changed.
For R_RISCV_GOT_HI20, report dangerous relocation error when addend
isn't zero.
ld/
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
* testsuite/ld-riscv-elf/pcrel-lo-addend-3a.d: New testcase.
* testsuite/ld-riscv-elf/pcrel-lo-addend-3a.s: Likewise.
* testsuite/ld-riscv-elf/pcrel-lo-addend-3b.d: New testcase.
Should report error since the %pcrel_lo with addend refers to
%got_pcrel_hi.
* testsuite/ld-riscv-elf/pcrel-lo-addend-3b.s: Likewise.
* testsuite/ld-riscv-elf/pcrel-lo-addend-3c.d: New testcase.
Should report error since the %got_pcrel_hi with addend.
* testsuite/ld-riscv-elf/pcrel-lo-addend-3c.s: Likewise.
* testsuite/ld-riscv-elf/pcrel-lo-addend-3.ld: Likewise.
Since GOTOFF relocations against IFUNC symbols must go through PLT,
set PLT reference count to 1 for GOTOFF relocation.
bfd/
PR ld/27998
* elfxx-x86.c (elf_x86_allocate_dynrelocs): Count PLT for GOTOFF
relocation against IFUNC symbols.
(_bfd_x86_elf_adjust_dynamic_symbol): Likewise.
ld/
PR ld/27998
* testsuite/ld-i386/i386.exp: Run PR ld/27998 tests.
* testsuite/ld-i386/pr27998a.d: New file.
* testsuite/ld-i386/pr27998a.s: Likewise.
* testsuite/ld-i386/pr27998b.d: Likewise.
* testsuite/ld-i386/pr27998b.s: Likewise.
Change
ld: warning: creating DT_TEXTREL in a PIE
to
ld: warning: creating DT_TEXTREL in a PDE
on PDE.
bfd/
* elflink.c (bfd_elf_final_link): Correct DT_TEXTREL warning in
PDE.
ld/
* testsuite/ld-x86-64/textrel-1.err: New file.
* testsuite/ld-x86-64/textrel-1a.s: Likewise.
* testsuite/ld-x86-64/textrel-1b.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run textrel-1 tests.
1. Skip am33_2.0-*-* hppa*-*-hpux* mn10300-*-* since assembly source file
for the HPPA assembler is renamed and modifed by sed. mn10300 has RELA
relocations in .note.gnu.property section which elf_parse_notes doesn't
support.
2. Pass --generate-missing-build-notes=no to assembler.
3. Allow other note sections for xtensa.
* testsuite/ld-elf/property-and-1.d: Skip am33_2.0, hppa-hpux
and mn10300.
Pass --generate-missing-build-notes=no to assembler. Allow
other note sections for xtensa.
* testsuite/ld-elf/property-and-2.d: Likewise.
* testsuite/ld-elf/property-and-3.d: Likewise.
* testsuite/ld-elf/property-and-4.d: Likewise.
* testsuite/ld-elf/property-or-1.d: Likewise.
* testsuite/ld-elf/property-or-2.d: Likewise.
* testsuite/ld-elf/property-or-3.d: Likewise.
* testsuite/ld-elf/property-or-4.d: Likewise.
Implement GNU_PROPERTY_UINT32_AND_XXX/GNU_PROPERTY_UINT32_OR_XXX:
https://sourceware.org/pipermail/gnu-gabi/2021q1/000467.html
1. GNU_PROPERTY_UINT32_AND_LO..GNU_PROPERTY_UINT32_AND_HI
#define GNU_PROPERTY_UINT32_AND_LO 0xb0000000
#define GNU_PROPERTY_UINT32_AND_HI 0xb0007fff
A bit in the output pr_data field is set only if it is set in all
relocatable input pr_data fields. If all bits in the the output
pr_data field are zero, this property should be removed from output.
If the bit is 1, all input relocatables have the feature. If the
bit is 0 or the property is missing, the info is unknown.
2. GNU_PROPERTY_UINT32_OR_LO..GNU_PROPERTY_UINT32_OR_HI
#define GNU_PROPERTY_UINT32_OR_LO 0xb0008000
#define GNU_PROPERTY_UINT32_OR_HI 0xb000ffff
A bit in the output pr_data field is set if it is set in any
relocatable input pr_data fields. If all bits in the the output
pr_data field are zero, this property should be removed from output.
If the bit is 1, some input relocatables have the feature. If the
bit is 0 or the property is missing, the info is unknown.
bfd/
* elf-properties.c (_bfd_elf_parse_gnu_properties): Handle
GNU_PROPERTY_UINT32_AND_LO, GNU_PROPERTY_UINT32_AND_HI,
GNU_PROPERTY_UINT32_OR_LO and GNU_PROPERTY_UINT32_OR_HI.
(elf_merge_gnu_properties): Likewise.
binutils/
* readelf.c (print_gnu_property_note): Handle
GNU_PROPERTY_UINT32_AND_LO, GNU_PROPERTY_UINT32_AND_HI,
GNU_PROPERTY_UINT32_OR_LO and GNU_PROPERTY_UINT32_OR_HI.
include/
* elf/common.h (GNU_PROPERTY_UINT32_AND_LO): New.
(GNU_PROPERTY_UINT32_AND_HI): Likewise.
(GNU_PROPERTY_UINT32_OR_LO): Likewise.
(GNU_PROPERTY_UINT32_OR_HI): Likewise.
ld/
* testsuite/ld-elf/property-and-1.d: New file.
* testsuite/ld-elf/property-and-1.s: Likewise.
* testsuite/ld-elf/property-and-2.d: Likewise.
* testsuite/ld-elf/property-and-2.s: Likewise.
* testsuite/ld-elf/property-and-3.d: Likewise.
* testsuite/ld-elf/property-and-3.s: Likewise.
* testsuite/ld-elf/property-and-4.d: Likewise.
* testsuite/ld-elf/property-and-empty.s: Likewise.
* testsuite/ld-elf/property-or-1.d: Likewise.
* testsuite/ld-elf/property-or-1.s: Likewise.
* testsuite/ld-elf/property-or-2.d: Likewise.
* testsuite/ld-elf/property-or-2.s: Likewise.
* testsuite/ld-elf/property-or-3.d: Likewise.
* testsuite/ld-elf/property-or-3.s: Likewise.
* testsuite/ld-elf/property-or-4.d: Likewise.
* testsuite/ld-elf/property-or-empty.s: Likewise.
