This is embarrassing.
The whole point of CTF is that it remains intact even after a binary is
stripped, providing a compact mapping from symbols to types for
everything in the externally-visible interface of an ELF object: it has
connections to the symbol table for that purpose, and to the string
table to avoid duplicating symbol names. So it's a shame that the hooks
I implemented last year served to hook it up to the .symtab and .strtab,
which obviously disappear on strip, leaving any accompanying the CTF
dict containing references to strings (and, soon, symbols) which don't
exist any more because their containing strtab has been vaporized. The
original Solaris design used .dynsym and .dynstr (well, actually,
.ldynsym, which has more symbols) which do not disappear. So should we.
Thankfully the work we did before serves as guide rails, and adjusting
things to use the .dynstr and .dynsym was fast and easy. The only
annoyance is that the dynsym is assembled inside elflink.c in a fairly
piecemeal fashion, so that the easiest way to get the symbols out was to
hook in before every call to swap_symbol_out (we also leave in a hook in
front of symbol additions to the .symtab because it seems plausible that
we might want to hook them in future too: for now that hook is unused).
We adjust things so that rather than being offered a whole hash table of
symbols at once, libctf is now given symbols one at a time, with st_name
indexes already resolved and pointing at their final .dynstr offsets:
it's now up to libctf to resolve these to names as needed using the
strtab info we pass it separately.
Some bits might be contentious. The ctf_new_dynstr callback takes an
elf_internal_sym, and this remains an elf_internal_sym right down
through the generic emulation layers into ldelfgen. This is no worse
than the elf_sym_strtab we used to pass down, but in the future when we
gain non-ELF CTF symtab support we might want to lower the
elf_internal_sym to some other representation (perhaps a
ctf_link_symbol) in bfd or in ldlang_ctf_new_dynsym. We rename the
'apply_strsym' hooks to 'acquire_strings' instead, becuse they no longer
have anything to do with symbols.
There are some API changes to pieces of API which are technically public
but actually totally unused by anything and/or unused by anything but ld
so they can change freely: the ctf_link_symbol gains new fields to allow
symbol names to be given as strtab offsets as well as strings, and a
symidx so that the symbol index can be passed in. ctf_link_shuffle_syms
loses its callback parameter: the idea now is that linkers call the new
ctf_link_add_linker_symbol for every symbol in .dynsym, feed in all the
strtab entries with ctf_link_add_strtab, and then a call to
ctf_link_shuffle_syms will apply both and arrange to use them to reorder
the CTF symtab at CTF serialization time (which is coming in the next
commit).
Inside libctf we have a new preamble flag CTF_F_DYNSTR which is always
set in v3-format CTF dicts from this commit forwards: CTF dicts without
this flag are associated with .strtab like they used to be, so that old
dicts' external strings don't turn to garbage when loaded by new libctf.
Dicts with this flag are associated with .dynstr and .dynsym instead.
(The flag is not the next in sequence because this commit was written
quite late: the missing flags will be filled in by the next commit.)
Tests forthcoming in a later commit in this series.
bfd/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* elflink.c (elf_finalize_dynstr): Call examine_strtab after
dynstr finalization.
(elf_link_swap_symbols_out): Don't call it here. Call
ctf_new_symbol before swap_symbol_out.
(elf_link_output_extsym): Call ctf_new_dynsym before
swap_symbol_out.
(bfd_elf_final_link): Likewise.
* elf.c (swap_out_syms): Pass in bfd_link_info. Call
ctf_new_symbol before swap_symbol_out.
(_bfd_elf_compute_section_file_positions): Adjust.
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* readelf.c (dump_section_as_ctf): Use .dynsym and .dynstr, not
.symtab and .strtab.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* bfdlink.h (struct elf_sym_strtab): Replace with...
(struct elf_internal_sym): ... this.
(struct bfd_link_callbacks) <examine_strtab>: Take only a
symstrtab argument.
<ctf_new_symbol>: New.
<ctf_new_dynsym>: Likewise.
* ctf-api.h (struct ctf_link_sym) <st_symidx>: New.
<st_nameidx>: Likewise.
<st_nameidx_set>: Likewise.
(ctf_link_iter_symbol_f): Removed.
(ctf_link_shuffle_syms): Remove most parameters, just takes a
ctf_dict_t now.
(ctf_link_add_linker_symbol): New, split from
ctf_link_shuffle_syms.
* ctf.h (CTF_F_DYNSTR): New.
(CTF_F_MAX): Adjust.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldelfgen.c (struct ctf_strsym_iter_cb_arg): Rename to...
(struct ctf_strtab_iter_cb_arg): ... this, changing fields:
<syms>: Remove.
<symcount>: Remove.
<symstrtab>: Rename to...
<strtab>: ... this.
(ldelf_ctf_strtab_iter_cb): Adjust.
(ldelf_ctf_symbols_iter_cb): Remove.
(ldelf_new_dynsym_for_ctf): New, tell libctf about a single
symbol.
(ldelf_examine_strtab_for_ctf): Rename to...
(ldelf_acquire_strings_for_ctf): ... this, only doing the strtab
portion and not symbols.
* ldelfgen.h: Adjust declarations accordingly.
* ldemul.c (ldemul_examine_strtab_for_ctf): Rename to...
(ldemul_acquire_strings_for_ctf): ... this.
(ldemul_new_dynsym_for_ctf): New.
* ldemul.h: Adjust declarations accordingly.
* ldlang.c (ldlang_ctf_apply_strsym): Rename to...
(ldlang_ctf_acquire_strings): ... this.
(ldlang_ctf_new_dynsym): New.
(lang_write_ctf): Call ldemul_new_dynsym_for_ctf with NULL to do
the actual symbol shuffle.
* ldlang.h (struct elf_strtab_hash): Adjust accordingly.
* ldmain.c (bfd_link_callbacks): Wire up new/renamed callbacks.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-link.c (ctf_link_shuffle_syms): Adjust.
(ctf_link_add_linker_symbol): New, unimplemented stub.
* libctf.ver: Add it.
* ctf-create.c (ctf_serialize): Set CTF_F_DYNSTR on newly-serialized
dicts.
* ctf-open-bfd.c (ctf_bfdopen_ctfsect): Check for the flag: open the
symtab/strtab if not present, dynsym/dynstr otherwise.
* ctf-archive.c (ctf_arc_bufpreamble): New, get the preamble from
some arbitrary member of a CTF archive.
* ctf-impl.h (ctf_arc_bufpreamble): Declare it.
We were failing to report errors from ctf_archive_iter, which results in
silent early termination if (for example) one CTF archive member in a
.ctf section is corrupted and cannot be opened. Report the error in the
usual fashion instead.
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf): Report errors from ctf_archive_iter.
* readelf.c (dump_section_as_ctf): Likewise.
The functions that return ctf_dict_t's given a ctf_archive_t and a name
are very clumsily named. It sounds like they return *archives*, not
dictionaries, and the names are very long and clunky. Why do we
have a ctf_arc_open_by_name when it opens a dictionary, not an archive,
and when there is no way to open a dictionary in any other way? The
answer is purely internal: the function is located in ctf-archive.c,
and everything in there was called ctf_arc_*, and there is another
way to open a dict (by offset in the archive), that is internal to
ctf-archive.c and that nothing else can call.
This is clearly bad naming. The internal organization of the source tree
should not dictate public API names!
So rename things (keeping the old, bad names for compatibility), and
adjust all users. You now open a dict using ctf_dict_open, and
open it giving ELF sections via ctf_dict_open_sections.
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf): Use ctf_dict_open, not
ctf_arc_open_by_name.
* readelf.c (dump_section_as_ctf): Likewise.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c (elfctf_build_psymtabs): Use ctf_dict_open, not
ctf_arc_open_by_name.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_arc_open_by_name): Rename to...
(ctf_dict_open): ... this, keeping compatibility function.
(ctf_arc_open_by_name_sections): Rename to...
(ctf_dict_open_sections): ... this, keeping compatibility function.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-archive.c (ctf_arc_open_by_offset): Rename to...
(ctf_dict_open_by_offset): ... this. Adjust callers.
(ctf_arc_open_by_name_internal): Rename to...
(ctf_dict_open_internal): ... this. Adjust callers.
(ctf_arc_open_by_name_sections): Rename to...
(ctf_dict_open_sections): ... this, keeping compatibility function.
(ctf_arc_open_by_name): Rename to...
(ctf_dict_open): ... this, keeping compatibility function.
* libctf.ver: New functions added.
* ctf-link.c (ctf_link_one_input_archive): Adjusted accordingly.
(ctf_link_deduplicating_open_inputs): Likewise.
The naming of the ctf_file_t type in libctf is a historical curiosity.
Back in the Solaris days, CTF dictionaries were originally generated as
a separate file and then (sometimes) merged into objects: hence the
datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw
CTF is essentially never written to a file on its own, and the datatype
changed name to a "CTF dictionary" years ago. So the term "CTF file"
refers to something that is never a file! This is at best confusing.
The type has also historically been known as a 'CTF container", which is
even more confusing now that we have CTF archives which are *also* a
sort of container (they contain CTF dictionaries), but which are never
referred to as containers in the source code.
So fix this by completing the renaming, renaming ctf_file_t to
ctf_dict_t throughout, and renaming those few functions that refer to
CTF files by name (keeping compatibility aliases) to refer to dicts
instead. Old users who still refer to ctf_file_t will see (harmless)
pointer-compatibility warnings at compile time, but the ABI is unchanged
(since C doesn't mangle names, and ctf_file_t was always an opaque type)
and things will still compile fine as long as -Werror is not specified.
All references to CTF containers and CTF files in the source code are
fixed to refer to CTF dicts instead.
Further (smaller) renamings of annoyingly-named functions to come, as
part of the process of souping up queries across whole archives at once
(needed for the function info and data object sections).
binutils/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close.
* readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t.
(dump_ctf_archive_member): Likewise.
(dump_section_as_ctf): Likewise. Use ctf_dict_close, not
ctf_file_close.
gdb/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctfread.c: Change uses of ctf_file_t to ctf_dict_t.
(ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close.
include/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_file_t): Rename to...
(ctf_dict_t): ... this. Keep ctf_file_t around for compatibility.
(struct ctf_file): Likewise rename to...
(struct ctf_dict): ... this.
(ctf_file_close): Rename to...
(ctf_dict_close): ... this, keeping compatibility function.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this, keeping compatibility function.
All callers adjusted.
* ctf.h: Rename references to ctf_file_t to ctf_dict_t.
(struct ctf_archive) <ctfa_nfiles>: Rename to...
<ctfa_ndicts>: ... this.
ld/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (ctf_output): This is a ctf_dict_t now.
(lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t.
(ldlang_open_ctf): Adjust comment.
(lang_merge_ctf): Use ctf_dict_close, not ctf_file_close.
* ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to
ctf_dict_t. Change opaque declaration accordingly.
* ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust.
* ldemul.h (examine_strtab_for_ctf): Likewise.
(ldemul_examine_strtab_for_ctf): Likewise.
* ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise.
libctf/ChangeLog
2020-11-20 Nick Alcock <nick.alcock@oracle.com>
* ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations
adjusted.
(ctf_fileops): Rename to...
(ctf_dictops): ... this.
(ctf_dedup_t) <cd_id_to_file_t>: Rename to...
<cd_id_to_dict_t>: ... this.
(ctf_file_t): Fix outdated comment.
<ctf_fileops>: Rename to...
<ctf_dictops>: ... this.
(struct ctf_archive_internal) <ctfi_file>: Rename to...
<ctfi_dict>: ... this.
* ctf-archive.c: Rename ctf_file_t to ctf_dict_t.
Rename ctf_archive.ctfa_nfiles to ctfa_ndicts.
Rename ctf_file_close to ctf_dict_close. All users adjusted.
* ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers.
(ctf_bundle_t) <ctb_file>: Rename to...
<ctb_dict): ... this.
* ctf-decl.c: Rename ctf_file_t to ctf_dict_t.
* ctf-dedup.c: Likewise. Rename ctf_file_close to
ctf_dict_close. Refer to CTF dicts, not CTF containers.
* ctf-dump.c: Likewise.
* ctf-error.c: Likewise.
* ctf-hash.c: Likewise.
* ctf-inlines.h: Likewise.
* ctf-labels.c: Likewise.
* ctf-link.c: Likewise.
* ctf-lookup.c: Likewise.
* ctf-open-bfd.c: Likewise.
* ctf-string.c: Likewise.
* ctf-subr.c: Likewise.
* ctf-types.c: Likewise.
* ctf-util.c: Likewise.
* ctf-open.c: Likewise.
(ctf_file_close): Rename to...
(ctf_dict_close): ...this.
(ctf_file_close): New trivial wrapper around ctf_dict_close, for
compatibility.
(ctf_parent_file): Rename to...
(ctf_parent_dict): ... this.
(ctf_parent_file): New trivial wrapper around ctf_parent_dict, for
compatibility.
* libctf.ver: Add ctf_dict_close and ctf_parent_dict.
PR 22967
* nm.c (ifunc_type_chars): New variable.
(long_options): Add --ifunc-chars.
(print_symbol): Use ifunc_type_chars for ifunc symbols.
(main): Handle the new option.
* doc/binutils.texi: Document the new option.
* configure.ac: Add --enable-f-for-ifunc-symbols option which
changes the default symbol displayed by nm.
* NEWS: Mention the new feature.
* testsuite/binutils-all/nm.exp: Test the new feature.
* config.in: Regenerate.
* configure: Regenerate.
binutils/ChangeLog:
* testsuite/binutils-all/readelf-maskos-1a.d: Fix test for unrecognized
bit set in SHF_MASKOS range.
* testsuite/binutils-all/readelf-maskos-1b.d: Likewise.
* testsuite/binutils-all/readelf-maskos-unknown.s: New test.
ld/ChangeLog:
* testsuite/ld-elf/retain3.s: Move symbolic reference into writeable
.data section from read-only .text section.
* testsuite/ld-elf/retain5.d: Don't pass --print-gc-sections for test
that doesn't require it.
* testsuite/ld-elf/retain6a.d: Adjust test.
* testsuite/ld-elf/retain6main.s: Move symbolic reference into writeable
.data section from read-only .text section.
The SHF_GNU_RETAIN section flag is an extension to the GNU ELF OSABI.
It is defined as follows:
=========================================================
Section Attribute Flags
+-------------------------------------+
| Name | Value |
+-------------------------------------+
| SHF_GNU_RETAIN | 0x200000 (1 << 21) |
+-------------------------------------+
SHF_GNU_RETAIN
The link editor should not garbage collect the section.
=========================================================
The .section directive accepts the "R" flag, which indicates
SHF_GNU_RETAIN should be applied to the section.
There is not a direct mapping of SHF_GNU_RETAIN to the BFD
section flag SEC_KEEP. Keeping these flags distinct allows
SHF_GNU_RETAIN sections to be explicitly removed by placing them in
/DISCARD/.
bfd/ChangeLog:
* elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_retain.
(struct elf_obj_tdata): Increase has_gnu_osabi to 4 bits.
* elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_retain
for SHF_GNU_RETAIN.
(_bfd_elf_final_write_processing): Report if SHF_GNU_RETAIN is
not supported by the OSABI.
Adjust error messages.
* elflink.c (elf_link_input_bfd): Copy enabled has_gnu_osabi bits from
input BFD to output BFD.
(bfd_elf_gc_sections): gc_mark the section if SHF_GNU_RETAIN is set.
binutils/ChangeLog:
* NEWS: Announce SHF_GNU_RETAIN support.
* readelf.c (get_elf_section_flags): Handle SHF_GNU_RETAIN.
Recognize SHF_GNU_RETAIN and SHF_GNU_MBIND only for supported OSABIs.
* testsuite/binutils-all/readelf.exp: Run new tests.
Don't run run_dump_test when there isn't an assembler available.
* testsuite/lib/binutils-common.exp (supports_gnu_osabi): Adjust
comment.
* testsuite/binutils-all/readelf-maskos-1a.d: New test.
* testsuite/binutils-all/readelf-maskos-1b.d: New test.
* testsuite/binutils-all/readelf-maskos.s: New test.
* testsuite/binutils-all/retain1.s: New test.
* testsuite/binutils-all/retain1a.d: New test.
* testsuite/binutils-all/retain1b.d: New test.
gas/ChangeLog:
* NEWS: Announce SHF_GNU_RETAIN support.
* config/obj-elf.c (obj_elf_change_section): Merge SHF_GNU_RETAIN bit
between section declarations.
(obj_elf_parse_section_letters): Handle 'R' flag.
Handle numeric flag values within the SHF_MASKOS range.
(obj_elf_section): Validate SHF_GNU_RETAIN usage.
* doc/as.texi: Document 'R' flag to .section directive.
* testsuite/gas/elf/elf.exp: Run new tests.
* testsuite/gas/elf/section10.d: Unset SHF_GNU_RETAIN bit.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section22.d: New test.
* testsuite/gas/elf/section22.s: New test.
* testsuite/gas/elf/section23.s: New test.
* testsuite/gas/elf/section23a.d: New test.
* testsuite/gas/elf/section23b.d: New test.
* testsuite/gas/elf/section23b.err: New test.
* testsuite/gas/elf/section24.l: New test.
* testsuite/gas/elf/section24.s: New test.
* testsuite/gas/elf/section24a.d: New test.
* testsuite/gas/elf/section24b.d: New test.
include/ChangeLog:
* elf/common.h (SHF_GNU_RETAIN): Define.
ld/ChangeLog:
* NEWS: Announce support for SHF_GNU_RETAIN.
* ld.texi (garbage collection): Document SHF_GNU_RETAIN.
(Output Section Discarding): Likewise.
* testsuite/ld-elf/elf.exp: Run new tests.
* testsuite/ld-elf/retain1.s: New test.
* testsuite/ld-elf/retain1a.d: New test.
* testsuite/ld-elf/retain1b.d: New test.
* testsuite/ld-elf/retain2.d: New test.
* testsuite/ld-elf/retain2.ld: New test.
* testsuite/ld-elf/retain2.map: New test.
* testsuite/ld-elf/retain3.d: New test.
* testsuite/ld-elf/retain3.s: New test.
* testsuite/ld-elf/retain4.d: New test.
* testsuite/ld-elf/retain4.s: New test.
* testsuite/ld-elf/retain5.d: New test.
* testsuite/ld-elf/retain5.map: New test.
* testsuite/ld-elf/retain5lib.s: New test.
* testsuite/ld-elf/retain5main.s: New test.
* testsuite/ld-elf/retain6a.d: New test.
* testsuite/ld-elf/retain6b.d: New test.
* testsuite/ld-elf/retain6lib.s: New test.
* testsuite/ld-elf/retain6main.s: New test.
PR 26829
* dwarf.c (struct dwo_info): Add cu_offset field.
(add_dwo_info): Add cu_offset parameter. Record in new dwo_info
struct.
(add_dwo_name): Add cu_offset field.
(add_dwo_dir): Add cu_offset field.
(add_dwo_id): Add cu_offset field.
(read_and_display_attr_value): Pass cu_offset to dwo recording
functions.
(load_separate_debug_files): Accumulate name, dir and id values
and display once for each CU.
* testsuite/binutils-all/dwo.sL Use a separate CU for the second
dwo link.
* testsuite/binutils-all/readelf.k2: Update expected output.
elfedit.c:904:15: error: 'osabi' may be used uninitialised in this function [-Werror=maybe-uninitialized]
904 | osabi = concat (osabi, "|", osabis[i].name, NULL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* elfedit (usage): Avoid false positive "may be used uninitialised".
Don't leak memory.
This feature doesn't actually require plugin support, that was a
mistake in the previous patch. Fixes these fails:
hppa-hp-hpux10 +FAIL: ar adding library dependencies
i386-bsd +FAIL: ar adding library dependencies
i386-msdos +FAIL: ar adding library dependencies
ns32k-netbsd +FAIL: ar adding library dependencies
ns32k-pc532-mach +FAIL: ar adding library dependencies
pdp11-dec-aout +FAIL: ar adding library dependencies
* ar.c (main): Use plugin_target rather than "target" when
resetting libdeps_bfd target.
Update elfedit message to
$ elfedit --help
Usage: elfedit <option(s)> elffile(s)
Update the ELF header of ELF files
The options are:
--input-mach [none|i386|iamcu|l1om|k1om|x86_64]
Set input machine type
--output-mach [none|i386|iamcu|l1om|k1om|x86_64]
Set output machine type
--input-type [none|rel|exec|dyn]
Set input file type
--output-type [none|rel|exec|dyn]
Set output file type
--input-osabi [none|HPUX|NetBSD|GNU|Linux|Solaris|AIX|Irix|FreeBSD|TRU64|Modesto|OpenBSD|OpenVMS|NSK|AROS|FenixOS]
Set input OSABI
--output-osabi [none|HPUX|NetBSD|GNU|Linux|Solaris|AIX|Irix|FreeBSD|TRU64|Modesto|OpenBSD|OpenVMS|NSK|AROS|FenixOS]
Set output OSABI
--enable-x86-feature [ibt|shstk]
Enable x86 feature
--disable-x86-feature [ibt|shstk]
Disable x86 feature
-h --help Display this information
-v --version Display the version number of elfedit
Report bugs to <http://www.sourceware.org/bugzilla/>
* elfedit.c: Include "libiberty.h".
(usage): Update help message.
* ar.c (long_options): Add --record-libdeps.
(usage): Mention the new option.
(decode_options): Handle the new option.
(replace_members): If necessary, create a bfd to hold the libdeps
description.
* binemul.c (ar_emul_append_bfd): New function.
(ar_emul_replace_bfd): New function.
(ar_emul_default_append): Replace file_name and target arguments
with new_bfd argument.
(ar_emul_default_replace): Likewise.
* binemul.h: Update prototypes.
(struct bin_emulation_xfer_struct): Update fields.
* doc/binutils.texi: Document the new option.
* NEWS: Mention the new feature.
* emul_aix.c (ar_emul_aix_append): Update.
(ar_emul_aix_replace): Likewise.
* testsuite/binutils-all/ar.exp: Add test of new feature.
A .debug_abbrev section can have multiple CUs. When caching abbrev list,
we need to check abbrev base to support multiple CUs.
PR binutils/26808
* dwarf.c (abbrev_list): Add abbrev_base.
(new_abbrev_list): Add an abbrev_base argument and record it.
(find_abbrev_list_by_abbrev_offset): Add an abbrev_base argument
and match it.
(process_debug_info): Pass abbrev_base to new_abbrev_list and
find_abbrev_list_by_abbrev_offset.
(display_debug_abbrev): Pass 0 abbrev_base to new_abbrev_list
and find_abbrev_list_by_abbrev_offset.
* testsuite/binutils-all/x86-64/pr26808.dump: New file.
* testsuite/binutils-all/x86-64/pr26808.dwp.bz2: Likewise.
* testsuite/binutils-all/x86-64/x86-64.exp: Run PR binutils/26808
test.
I just came across the GDB 10.1 release notes and saw that md5 is still
being used in those. I thought it would be a good idea to instead have a
more modern, secure and wildly available hash function such as SHA256 as
part of the release process.
The changes have been done rather mechnically via sed but executing the
`src-release.sh -b gdb` did work so I am confident about the result.
While this does not directly address the release mails, I was wasn't
able to find the template/script used for those, this is probably still
an improvement.
ChangeLog:
* src-release.sh: Use sha256sum instead of md5sum.
binutils/ChangeLog:
* README-how-to-make-a-release: Use sha256sum instead of md5sum.
Change-Id: I9cf19ea40699137c45463b8514f6e29271af2347
* dwarf.c (struct abbrev_list): New structure. Used to collect
lists of abbreviation sets.
(struct abbrev_map): New structure. Used to map CU offsets to
abbreviation offsets.
(record_abbrev_list): New function. A new entry to an
abbreviation list.
(free_all_abbrevs): Update to free abbreviation lists.
(new_abbrev_list): New function. Start a new abbreviation
list.
(find_abbrev_list_by_abbrev_offset): New function.
(find_abbrev_map_by_offset): New function.
(add_abbrev): Add abbrev_list parameter.
(add_abbrev_attr): Likewise.
(process_abbrev_section): Rename to process_abbrev_set and add
list parameter.
(get_type_abbrev_from_form): New function. Attempts to decode the
forms used by DW_AT_type attributes.
(get_type_signedness): Display type names if operating in wide
mode. Use get_type_abbrev_from_form.
(read_and_display_attr_value): Use get_type_abbrev_from_form.
(process_debug_info): Pre-parse the CU headers to collate all the
abbrevs before starting the main scan.
(process_debug_abbrev): Do not free any loaded abbrevs.
(free_debug_memory): Free the abbrev maps.
bfd * po/es.po: Fix printf format
binutils * windmc.c: Fix printf format
gas * config/tc-arc.c: Fix printf format
opcodes * po/es.po: Fix printf format
sim * arm/armos.c: Fix printf format
* ppc/emul_netbsd.c: Fix printf format
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
* dwarf.c (skip_attr_bytes): Accept DWARF versions higher than 4
when processing the DW_FORM_ref_addr form.
Skip bytes in DW_FORM_block and DW_FORM_exprloc forms.
Handle DW_FORM_indirect.
(get_type_signedness): Allow a limited amount of recursion.
Do not attempt to decode types that use the DW_FORM_ref_addr form.
(read_and_display_attr_value): Do not attempt to decode types
that use the DW_FORM_ref_addr form.
Using gcc-10 or current mainline gcc, binutils configured with
--disable-nls results in:
readelf.c: In function 'display_lto_symtab':
readelf.c:12283:26: error: offset '17' outside bounds of constant string [-Werror=array-bounds]
12283 | SECTION_NAME (section) + strlen (".gnu.lto_.symtab.")) > 0
| ^
Which is actually a bogus warning in this case because we've already
checked the name string for validity, so SECTION_NAME won't ever be
"<none>", "<no-strings>" or "<corrupt>". This patch fixes the problem
by making SECTION_NAME simply return the string from the string table.
Other places also shouldn't be trying to match any of the error
strings against a section name, so fix them too.
* readelf.c: Delete whitespace at end of line throughout.
(SECTION_NAME, SECTION_NAME_VALID): New.
(SECTION_NAME_PRINT): Rename from SECTION_NAME. Formatting.
(printable_section_name, dump_relocations): Use SECTION_NAME_PRINT.
(process_section_headers, process_section_groups): Likewise.
(shdr_to_ctf_sect): Likewise.
(find_section, find_section_in_set): Use SECTION_NAME_VALID.
(ia64_process_unwind, hppa_process_unwind): Likewise.
(display_debug_section, initialise_dumps_byname): Likewise.
(process_lto_symbol_tables): Likewise. Check trailing period of
lto symbol table names.
(display_lto_symtab): Use sizeof instead of strlen.
* readelf.c (do_lto_syms): New local.
(long_option_values): Add OPTION_LTO_SYMS.
(options): Add --lto-syms.
(usage): Mention the new option.
(parse_args): Parse the new option.
(get_lto_kind): New function.
(get_lto_visibility): New function.
(get_lto_sym_type): New function.
(display_lto_symtab): New function - displays the contents of an
LTo symbol table section.
(process_lto_symbol_tables): New functions. Calls
dipslay_lto_symtab on any LTO symbol table section.
(process_object_file): Call process_lto_symbol_tables.
* doc/binutils.texi: Document the new option.
* NEWS: Mention the new feature.
display_loclists_list only handled DW_LLE_offset_pair as bounded
location description. Also handle DW_LLE_start_end and DW_LLE_start_lenght.
These don't use the base_address.
binutils/ChangeLog:
* dwarf.c (display_loclists_list): Handle DW_LLE_start_end and
DW_LLE_start_length. Only add base_address for DW_LLE_offset_pair.
* elfcomm.c (byte_put_little_endian, byte_put_big_endian): Support
more field sizes.
* readelf.c (target_specific_reloc_handling <MSP430>): Limit
allowed reloc_size. Don't read_leb128 outside of section.
dwz in DWARF5 mode might produce DW_UT_partial unit types, which are
the same as DW_UT_compile unit types (but start with a DW_TAG_partial_unit)
and it might produce DW_FORM_ref_addr to create a reference between
units. Accept both constructs.
binutils/ChangeLog:
* dwarf.c (read_and_display_attr_value): Handle DW_FORM_ref_addr
for dwarf_version 5 just as version 3 and 4 (only 2 is different).
(process_debug_info): Allow DW_UT_partial.
Define NT_X86_CET which is the proposed note for x86 CET state to support
Intel CET in Linux kernel. Double check it after Intel CET patches have
been merged into Linux kernel.
binutils/
* readelf.c (get_note_type): Support NT_X86_CET.
include/
* elf/common.h (NT_X86_CET): New.
PR 26595
* dwarf.c (load_separate_debug_info): Return NULL rather than
FALSE in error situations.
(load_separate_debug_file): Move code to load debug links to ...
(check_for_and_load_links): ... here. New function. Load
separate debug information pointed to by debuglink and
debugaltlink sections. Recursively scan newly loaded debug
information for more links and load them too.
The associated check function doesn't do anything with its "data"
param, so nothing to adjust there.
PR 26578
* dwarf.c (parse_gnu_debugaltlink): Don't alloc build_id_data.
(load_separate_debug_files): Use a stack var for build_id_data.
Pass --disable-reloc-section on PE targets for PR 25662 test since
commit 514b4e191d
Author: Jeremy Drake <sourceware-bugzilla@jdrake.com>
Date: Thu Aug 27 12:58:27 2020 +0100
Change the default characteristics of DLLs built by the linker to more secure settings.
defaulted to --enable-reloc-section.
PR ld/26587
* testsuite/binutils-all/objcopy.exp: Pass --disable-reloc-section
to ld on PE targets for PR 25662 test.
Link-time relaxations of branches are common for MSP430, given that GCC
can generate pessimal branch instructions, and the
-mcode-region=either/-mdata-region=either options to shuffle sections
can further change the type of branch instruction required.
These relaxations can result in invalid code when .uleb128
directives, used in the .gcc_except_table section, are used to calculate
the distance between two labels. A value for the .uleb128 directive is
calculated at assembly-time, and can't be updated at link-time, even if
relaxation causes the distance between the labels to change.
This patch adds relocations for subtract expressions in .uleb128
directives, to allow the linker to re-calculate the value of these
expressions after relaxation has been performed.
bfd/ChangeLog:
* bfd-in2.h (bfd_reloc_code_real): Add
BFD_RELOC_MSP430_{SET,SUB}_ULEB128.
* elf32-msp430.c (msp430_elf_ignore_reloc): New.
(elf_msp430_howto_table): Add R_MSP430{,X}_GNU_{SET,SUB}_ULEB128.
(msp430_reloc_map): Add R_MSP430_GNU_{SET,SUB}_ULEB128.
(msp430x_reloc_map): Add R_MSP430X_GNU_{SET,SUB}_ULEB128.
(write_uleb128): New.
(msp430_final_link_relocate): Handle R_MSP430{,X}_GNU_{SET,SUB}_ULEB128.
* libbfd.c (_bfd_write_unsigned_leb128): New.
* libbfd.h (_bfd_write_unsigned_leb128): New prototype.
Add BFD_RELOC_MSP430_{SET,SUB}_ULEB128.
* reloc.c: Document BFD_RELOC_MSP430_{SET,SUB}_ULEB128.
binutils/ChangeLog:
* readelf.c (target_specific_reloc_handling): Handle
R_MSP430{,X}_GNU_{SET,SUB}_ULEB128.
gas/ChangeLog:
* config/tc-msp430.c (msp430_insert_uleb128_fixes): New.
(msp430_md_end): Call msp430_insert_uleb128_fixes.
include/ChangeLog:
* elf/msp430.h (elf_msp430_reloc_type): Add
R_MSP430_GNU_{SET,SUB}_ULEB128.
(elf_msp430x_reloc_type): Add R_MSP430X_GNU_{SET,SUB}_ULEB128.
ld/ChangeLog:
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
* testsuite/ld-msp430-elf/uleb128.s: New test.
* testsuite/ld-msp430-elf/uleb128_430.d: New test.
* testsuite/ld-msp430-elf/uleb128_430x.d: New test.
When compiled on a 32-bit host, a temp var is too small for possible
64-bit values to be calculated.
* readelf.c (print_gnu_build_attribute_name): Make "bytes"
unsigned long long.
