mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2025-01-24 12:35:55 +08:00
97caaa905a
132 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Tom Tromey
|
c80e29dba9 |
Change get_ada_task_ptid parameter type
get_ada_task_ptid currently takes a 'long' as its 'thread' parameter type. However, on some platforms this is actually a pointer, and using 'long' can sometimes end up with the value being sign-extended. This sign extension can cause problems later, if the tid is then later used as an address again. This patch changes the parameter type to ULONGEST and updates all the uses. This approach preserves sign extension on the targets where it is apparently intended, while avoiding it on others. Co-Authored-By: John Baldwin <jhb@FreeBSD.org> |
||
|
Tom Tromey
|
96bbe3ef96 |
Change ptid_t::tid to ULONGEST
The ptid_t 'tid' member is normally used as an address in gdb -- both bsd-uthread and ravenscar-thread use it this way. However, because the type is 'long', this can cause problems with sign extension. This patch changes the type to ULONGEST to ensure that sign extension does not occur. |
||
Pedro Alves
|
08bdefb58b |
gdb: make inferior_list use intrusive_list
Change inferior_list, the global list of inferiors, to use intrusive_list. I think most other changes are somewhat obvious fallouts from this change. There is a small change in behavior in scoped_mock_context. Before this patch, constructing a scoped_mock_context would replace the whole inferior list with only the new mock inferior. Tests using two scoped_mock_contexts therefore needed to manually link the two inferiors together, as the second scoped_mock_context would bump the first mock inferior from the thread list. With this patch, a scoped_mock_context adds its mock inferior to the inferior list on construction, and removes it on destruction. This means that tests run with mock inferiors in the inferior list in addition to any pre-existing inferiors (there is always at least one). There is no possible pid clash problem, since each scoped mock inferior uses its own process target, and pids are per process target. Co-Authored-By: Simon Marchi <simon.marchi@efficios.com> Change-Id: I7eb6a8f867d4dcf8b8cd2dcffd118f7270756018 |
||
Simon Marchi
|
c90e7d6352 |
gdbsupport, gdb: give names to observers
Give a name to each observer, this will help produce more meaningful debug message. gdbsupport/ChangeLog: * observable.h (class observable) <struct observer> <observer>: Add name parameter. <name>: New field. <attach>: Add name parameter, update all callers. Change-Id: Ie0cc4664925215b8d2b09e026011b7803549fba0 |
||
Joel Brobecker
|
3666a04883 |
Update copyright year range in all GDB files
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
||
|
Tom Tromey
|
a9f14fa549 |
Handle CPU offset for Ravenscar
The Ravenscar support assumes that the thread ID is the same as the CPU ID that appears in the Ada task structure. However, on some systems, gdbserver will report thread IDs that are off by some constant. This can happen, e.g., with qemu in a scenario where there is an additional (unreported) CPU in the emulation. The Ada Ravenscar runtimes have been modified to store this offset in a global variable. This patch changes gdb to read this variable, when it exists, and apply the offset to the base CPU ID. This fixes some crashes that otherwise occur. 2020-12-11 Tom Tromey <tromey@adacore.com> * ada-tasks.c (struct ada_tasks_pspace_data) <cpu_id_offset>: New field. (ada_get_tcb_types_info): Look for __gnat_gdb_cpu_first_id. (read_atcb): Use cpu_id_offset. |
||
Simon Marchi
|
dda83cd783 |
gdb, gdbserver, gdbsupport: fix leading space vs tabs issues
Many spots incorrectly use only spaces for indentation (for example, there are a lot of spots in ada-lang.c). I've always found it awkward when I needed to edit one of these spots: do I keep the original wrong indentation, or do I fix it? What if the lines around it are also wrong, do I fix them too? I probably don't want to fix them in the same patch, to avoid adding noise to my patch. So I propose to fix as much as possible once and for all (hopefully). One typical counter argument for this is that it makes code archeology more difficult, because git-blame will show this commit as the last change for these lines. My counter counter argument is: when git-blaming, you often need to do "blame the file at the parent commit" anyway, to go past some other refactor that touched the line you are interested in, but is not the change you are looking for. So you already need a somewhat efficient way to do this. Using some interactive tool, rather than plain git-blame, makes this trivial. For example, I use "tig blame <file>", where going back past the commit that changed the currently selected line is one keystroke. It looks like Magit in Emacs does it too (though I've never used it). Web viewers of Github and Gitlab do it too. My point is that it won't really make archeology more difficult. The other typical counter argument is that it will cause conflicts with existing patches. That's true... but it's a one time cost, and those are not conflicts that are difficult to resolve. I have also tried "git rebase --ignore-whitespace", it seems to work well. Although that will re-introduce the faulty indentation, so one needs to take care of fixing the indentation in the patch after that (which is easy). gdb/ChangeLog: * aarch64-linux-tdep.c: Fix indentation. * aarch64-ravenscar-thread.c: Fix indentation. * aarch64-tdep.c: Fix indentation. * aarch64-tdep.h: Fix indentation. * ada-lang.c: Fix indentation. * ada-lang.h: Fix indentation. * ada-tasks.c: Fix indentation. * ada-typeprint.c: Fix indentation. * ada-valprint.c: Fix indentation. * ada-varobj.c: Fix indentation. * addrmap.c: Fix indentation. * addrmap.h: Fix indentation. * agent.c: Fix indentation. * aix-thread.c: Fix indentation. * alpha-bsd-nat.c: Fix indentation. * alpha-linux-tdep.c: Fix indentation. * alpha-mdebug-tdep.c: Fix indentation. * alpha-nbsd-tdep.c: Fix indentation. * alpha-obsd-tdep.c: Fix indentation. * alpha-tdep.c: Fix indentation. * amd64-bsd-nat.c: Fix indentation. * amd64-darwin-tdep.c: Fix indentation. * amd64-linux-nat.c: Fix indentation. * amd64-linux-tdep.c: Fix indentation. * amd64-nat.c: Fix indentation. * amd64-obsd-tdep.c: Fix indentation. * amd64-tdep.c: Fix indentation. * amd64-windows-tdep.c: Fix indentation. * annotate.c: Fix indentation. * arc-tdep.c: Fix indentation. * arch-utils.c: Fix indentation. * arch/arm-get-next-pcs.c: Fix indentation. * arch/arm.c: Fix indentation. * arm-linux-nat.c: Fix indentation. * arm-linux-tdep.c: Fix indentation. * arm-nbsd-tdep.c: Fix indentation. * arm-pikeos-tdep.c: Fix indentation. * arm-tdep.c: Fix indentation. * arm-tdep.h: Fix indentation. * arm-wince-tdep.c: Fix indentation. * auto-load.c: Fix indentation. * auxv.c: Fix indentation. * avr-tdep.c: Fix indentation. * ax-gdb.c: Fix indentation. * ax-general.c: Fix indentation. * bfin-linux-tdep.c: Fix indentation. * block.c: Fix indentation. * block.h: Fix indentation. * blockframe.c: Fix indentation. * bpf-tdep.c: Fix indentation. * break-catch-sig.c: Fix indentation. * break-catch-syscall.c: Fix indentation. * break-catch-throw.c: Fix indentation. * breakpoint.c: Fix indentation. * breakpoint.h: Fix indentation. * bsd-uthread.c: Fix indentation. * btrace.c: Fix indentation. * build-id.c: Fix indentation. * buildsym-legacy.h: Fix indentation. * buildsym.c: Fix indentation. * c-typeprint.c: Fix indentation. * c-valprint.c: Fix indentation. * c-varobj.c: Fix indentation. * charset.c: Fix indentation. * cli/cli-cmds.c: Fix indentation. * cli/cli-decode.c: Fix indentation. * cli/cli-decode.h: Fix indentation. * cli/cli-script.c: Fix indentation. * cli/cli-setshow.c: Fix indentation. * coff-pe-read.c: Fix indentation. * coffread.c: Fix indentation. * compile/compile-cplus-types.c: Fix indentation. * compile/compile-object-load.c: Fix indentation. * compile/compile-object-run.c: Fix indentation. * completer.c: Fix indentation. * corefile.c: Fix indentation. * corelow.c: Fix indentation. * cp-abi.h: Fix indentation. * cp-namespace.c: Fix indentation. * cp-support.c: Fix indentation. * cp-valprint.c: Fix indentation. * cris-linux-tdep.c: Fix indentation. * cris-tdep.c: Fix indentation. * darwin-nat-info.c: Fix indentation. * darwin-nat.c: Fix indentation. * darwin-nat.h: Fix indentation. * dbxread.c: Fix indentation. * dcache.c: Fix indentation. * disasm.c: Fix indentation. * dtrace-probe.c: Fix indentation. * dwarf2/abbrev.c: Fix indentation. * dwarf2/attribute.c: Fix indentation. * dwarf2/expr.c: Fix indentation. * dwarf2/frame.c: Fix indentation. * dwarf2/index-cache.c: Fix indentation. * dwarf2/index-write.c: Fix indentation. * dwarf2/line-header.c: Fix indentation. * dwarf2/loc.c: Fix indentation. * dwarf2/macro.c: Fix indentation. * dwarf2/read.c: Fix indentation. * dwarf2/read.h: Fix indentation. * elfread.c: Fix indentation. * eval.c: Fix indentation. * event-top.c: Fix indentation. * exec.c: Fix indentation. * exec.h: Fix indentation. * expprint.c: Fix indentation. * f-lang.c: Fix indentation. * f-typeprint.c: Fix indentation. * f-valprint.c: Fix indentation. * fbsd-nat.c: Fix indentation. * fbsd-tdep.c: Fix indentation. * findvar.c: Fix indentation. * fork-child.c: Fix indentation. * frame-unwind.c: Fix indentation. * frame-unwind.h: Fix indentation. * frame.c: Fix indentation. * frv-linux-tdep.c: Fix indentation. * frv-tdep.c: Fix indentation. * frv-tdep.h: Fix indentation. * ft32-tdep.c: Fix indentation. * gcore.c: Fix indentation. * gdb_bfd.c: Fix indentation. * gdbarch.sh: Fix indentation. * gdbarch.c: Re-generate * gdbarch.h: Re-generate. * gdbcore.h: Fix indentation. * gdbthread.h: Fix indentation. * gdbtypes.c: Fix indentation. * gdbtypes.h: Fix indentation. * glibc-tdep.c: Fix indentation. * gnu-nat.c: Fix indentation. * gnu-nat.h: Fix indentation. * gnu-v2-abi.c: Fix indentation. * gnu-v3-abi.c: Fix indentation. * go32-nat.c: Fix indentation. * guile/guile-internal.h: Fix indentation. * guile/scm-cmd.c: Fix indentation. * guile/scm-frame.c: Fix indentation. * guile/scm-iterator.c: Fix indentation. * guile/scm-math.c: Fix indentation. * guile/scm-ports.c: Fix indentation. * guile/scm-pretty-print.c: Fix indentation. * guile/scm-value.c: Fix indentation. * h8300-tdep.c: Fix indentation. * hppa-linux-nat.c: Fix indentation. * hppa-linux-tdep.c: Fix indentation. * hppa-nbsd-nat.c: Fix indentation. * hppa-nbsd-tdep.c: Fix indentation. * hppa-obsd-nat.c: Fix indentation. * hppa-tdep.c: Fix indentation. * hppa-tdep.h: Fix indentation. * i386-bsd-nat.c: Fix indentation. * i386-darwin-nat.c: Fix indentation. * i386-darwin-tdep.c: Fix indentation. * i386-dicos-tdep.c: Fix indentation. * i386-gnu-nat.c: Fix indentation. * i386-linux-nat.c: Fix indentation. * i386-linux-tdep.c: Fix indentation. * i386-nto-tdep.c: Fix indentation. * i386-obsd-tdep.c: Fix indentation. * i386-sol2-nat.c: Fix indentation. * i386-tdep.c: Fix indentation. * i386-tdep.h: Fix indentation. * i386-windows-tdep.c: Fix indentation. * i387-tdep.c: Fix indentation. * i387-tdep.h: Fix indentation. * ia64-libunwind-tdep.c: Fix indentation. * ia64-libunwind-tdep.h: Fix indentation. * ia64-linux-nat.c: Fix indentation. * ia64-linux-tdep.c: Fix indentation. * ia64-tdep.c: Fix indentation. * ia64-tdep.h: Fix indentation. * ia64-vms-tdep.c: Fix indentation. * infcall.c: Fix indentation. * infcmd.c: Fix indentation. * inferior.c: Fix indentation. * infrun.c: Fix indentation. * iq2000-tdep.c: Fix indentation. * language.c: Fix indentation. * linespec.c: Fix indentation. * linux-fork.c: Fix indentation. * linux-nat.c: Fix indentation. * linux-tdep.c: Fix indentation. * linux-thread-db.c: Fix indentation. * lm32-tdep.c: Fix indentation. * m2-lang.c: Fix indentation. * m2-typeprint.c: Fix indentation. * m2-valprint.c: Fix indentation. * m32c-tdep.c: Fix indentation. * m32r-linux-tdep.c: Fix indentation. * m32r-tdep.c: Fix indentation. * m68hc11-tdep.c: Fix indentation. * m68k-bsd-nat.c: Fix indentation. * m68k-linux-nat.c: Fix indentation. * m68k-linux-tdep.c: Fix indentation. * m68k-tdep.c: Fix indentation. * machoread.c: Fix indentation. * macrocmd.c: Fix indentation. * macroexp.c: Fix indentation. * macroscope.c: Fix indentation. * macrotab.c: Fix indentation. * macrotab.h: Fix indentation. * main.c: Fix indentation. * mdebugread.c: Fix indentation. * mep-tdep.c: Fix indentation. * mi/mi-cmd-catch.c: Fix indentation. * mi/mi-cmd-disas.c: Fix indentation. * mi/mi-cmd-env.c: Fix indentation. * mi/mi-cmd-stack.c: Fix indentation. * mi/mi-cmd-var.c: Fix indentation. * mi/mi-cmds.c: Fix indentation. * mi/mi-main.c: Fix indentation. * mi/mi-parse.c: Fix indentation. * microblaze-tdep.c: Fix indentation. * minidebug.c: Fix indentation. * minsyms.c: Fix indentation. * mips-linux-nat.c: Fix indentation. * mips-linux-tdep.c: Fix indentation. * mips-nbsd-tdep.c: Fix indentation. * mips-tdep.c: Fix indentation. * mn10300-linux-tdep.c: Fix indentation. * mn10300-tdep.c: Fix indentation. * moxie-tdep.c: Fix indentation. * msp430-tdep.c: Fix indentation. * namespace.h: Fix indentation. * nat/fork-inferior.c: Fix indentation. * nat/gdb_ptrace.h: Fix indentation. * nat/linux-namespaces.c: Fix indentation. * nat/linux-osdata.c: Fix indentation. * nat/netbsd-nat.c: Fix indentation. * nat/x86-dregs.c: Fix indentation. * nbsd-nat.c: Fix indentation. * nbsd-tdep.c: Fix indentation. * nios2-linux-tdep.c: Fix indentation. * nios2-tdep.c: Fix indentation. * nto-procfs.c: Fix indentation. * nto-tdep.c: Fix indentation. * objfiles.c: Fix indentation. * objfiles.h: Fix indentation. * opencl-lang.c: Fix indentation. * or1k-tdep.c: Fix indentation. * osabi.c: Fix indentation. * osabi.h: Fix indentation. * osdata.c: Fix indentation. * p-lang.c: Fix indentation. * p-typeprint.c: Fix indentation. * p-valprint.c: Fix indentation. * parse.c: Fix indentation. * ppc-linux-nat.c: Fix indentation. * ppc-linux-tdep.c: Fix indentation. * ppc-nbsd-nat.c: Fix indentation. * ppc-nbsd-tdep.c: Fix indentation. * ppc-obsd-nat.c: Fix indentation. * ppc-ravenscar-thread.c: Fix indentation. * ppc-sysv-tdep.c: Fix indentation. * ppc64-tdep.c: Fix indentation. * printcmd.c: Fix indentation. * proc-api.c: Fix indentation. * producer.c: Fix indentation. * producer.h: Fix indentation. * prologue-value.c: Fix indentation. * prologue-value.h: Fix indentation. * psymtab.c: Fix indentation. * python/py-arch.c: Fix indentation. * python/py-bpevent.c: Fix indentation. * python/py-event.c: Fix indentation. * python/py-event.h: Fix indentation. * python/py-finishbreakpoint.c: Fix indentation. * python/py-frame.c: Fix indentation. * python/py-framefilter.c: Fix indentation. * python/py-inferior.c: Fix indentation. * python/py-infthread.c: Fix indentation. * python/py-objfile.c: Fix indentation. * python/py-prettyprint.c: Fix indentation. * python/py-registers.c: Fix indentation. * python/py-signalevent.c: Fix indentation. * python/py-stopevent.c: Fix indentation. * python/py-stopevent.h: Fix indentation. * python/py-threadevent.c: Fix indentation. * python/py-tui.c: Fix indentation. * python/py-unwind.c: Fix indentation. * python/py-value.c: Fix indentation. * python/py-xmethods.c: Fix indentation. * python/python-internal.h: Fix indentation. * python/python.c: Fix indentation. * ravenscar-thread.c: Fix indentation. * record-btrace.c: Fix indentation. * record-full.c: Fix indentation. * record.c: Fix indentation. * reggroups.c: Fix indentation. * regset.h: Fix indentation. * remote-fileio.c: Fix indentation. * remote.c: Fix indentation. * reverse.c: Fix indentation. * riscv-linux-tdep.c: Fix indentation. * riscv-ravenscar-thread.c: Fix indentation. * riscv-tdep.c: Fix indentation. * rl78-tdep.c: Fix indentation. * rs6000-aix-tdep.c: Fix indentation. * rs6000-lynx178-tdep.c: Fix indentation. * rs6000-nat.c: Fix indentation. * rs6000-tdep.c: Fix indentation. * rust-lang.c: Fix indentation. * rx-tdep.c: Fix indentation. * s12z-tdep.c: Fix indentation. * s390-linux-tdep.c: Fix indentation. * score-tdep.c: Fix indentation. * ser-base.c: Fix indentation. * ser-mingw.c: Fix indentation. * ser-uds.c: Fix indentation. * ser-unix.c: Fix indentation. * serial.c: Fix indentation. * sh-linux-tdep.c: Fix indentation. * sh-nbsd-tdep.c: Fix indentation. * sh-tdep.c: Fix indentation. * skip.c: Fix indentation. * sol-thread.c: Fix indentation. * solib-aix.c: Fix indentation. * solib-darwin.c: Fix indentation. * solib-frv.c: Fix indentation. * solib-svr4.c: Fix indentation. * solib.c: Fix indentation. * source.c: Fix indentation. * sparc-linux-tdep.c: Fix indentation. * sparc-nbsd-tdep.c: Fix indentation. * sparc-obsd-tdep.c: Fix indentation. * sparc-ravenscar-thread.c: Fix indentation. * sparc-tdep.c: Fix indentation. * sparc64-linux-tdep.c: Fix indentation. * sparc64-nbsd-tdep.c: Fix indentation. * sparc64-obsd-tdep.c: Fix indentation. * sparc64-tdep.c: Fix indentation. * stabsread.c: Fix indentation. * stack.c: Fix indentation. * stap-probe.c: Fix indentation. * stubs/ia64vms-stub.c: Fix indentation. * stubs/m32r-stub.c: Fix indentation. * stubs/m68k-stub.c: Fix indentation. * stubs/sh-stub.c: Fix indentation. * stubs/sparc-stub.c: Fix indentation. * symfile-mem.c: Fix indentation. * symfile.c: Fix indentation. * symfile.h: Fix indentation. * symmisc.c: Fix indentation. * symtab.c: Fix indentation. * symtab.h: Fix indentation. * target-float.c: Fix indentation. * target.c: Fix indentation. * target.h: Fix indentation. * tic6x-tdep.c: Fix indentation. * tilegx-linux-tdep.c: Fix indentation. * tilegx-tdep.c: Fix indentation. * top.c: Fix indentation. * tracefile-tfile.c: Fix indentation. * tracepoint.c: Fix indentation. * tui/tui-disasm.c: Fix indentation. * tui/tui-io.c: Fix indentation. * tui/tui-regs.c: Fix indentation. * tui/tui-stack.c: Fix indentation. * tui/tui-win.c: Fix indentation. * tui/tui-winsource.c: Fix indentation. * tui/tui.c: Fix indentation. * typeprint.c: Fix indentation. * ui-out.h: Fix indentation. * unittests/copy_bitwise-selftests.c: Fix indentation. * unittests/memory-map-selftests.c: Fix indentation. * utils.c: Fix indentation. * v850-tdep.c: Fix indentation. * valarith.c: Fix indentation. * valops.c: Fix indentation. * valprint.c: Fix indentation. * valprint.h: Fix indentation. * value.c: Fix indentation. * value.h: Fix indentation. * varobj.c: Fix indentation. * vax-tdep.c: Fix indentation. * windows-nat.c: Fix indentation. * windows-tdep.c: Fix indentation. * xcoffread.c: Fix indentation. * xml-syscall.c: Fix indentation. * xml-tdesc.c: Fix indentation. * xstormy16-tdep.c: Fix indentation. * xtensa-config.c: Fix indentation. * xtensa-linux-nat.c: Fix indentation. * xtensa-linux-tdep.c: Fix indentation. * xtensa-tdep.c: Fix indentation. gdbserver/ChangeLog: * ax.cc: Fix indentation. * dll.cc: Fix indentation. * inferiors.h: Fix indentation. * linux-low.cc: Fix indentation. * linux-nios2-low.cc: Fix indentation. * linux-ppc-ipa.cc: Fix indentation. * linux-ppc-low.cc: Fix indentation. * linux-x86-low.cc: Fix indentation. * linux-xtensa-low.cc: Fix indentation. * regcache.cc: Fix indentation. * server.cc: Fix indentation. * tracepoint.cc: Fix indentation. gdbsupport/ChangeLog: * common-exceptions.h: Fix indentation. * event-loop.cc: Fix indentation. * fileio.cc: Fix indentation. * filestuff.cc: Fix indentation. * gdb-dlfcn.cc: Fix indentation. * gdb_string_view.h: Fix indentation. * job-control.cc: Fix indentation. * signals.cc: Fix indentation. Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695 |
||
Tom Tromey
|
841de12014 |
Remove target_has_stack macro
This removes the target_has_stack object-like macro, replacing it with the underlying function. gdb/ChangeLog 2020-09-28 Tom Tromey <tom@tromey.com> * windows-tdep.c (tlb_make_value): Update. * tui/tui-regs.c (tui_data_window::show_registers): Update. * thread.c (scoped_restore_current_thread::restore) (scoped_restore_current_thread::scoped_restore_current_thread) (thread_command): Update. * stack.c (backtrace_command_1, frame_apply_level_command) (frame_apply_all_command, frame_apply_command): Update. * infrun.c (siginfo_make_value, restore_infcall_control_state): Update. * gcore.c (derive_stack_segment): Update. * frame.c (get_current_frame, has_stack_frames): Update. * auxv.c (info_auxv_command): Update. * ada-tasks.c (ada_build_task_list): Update. * target.c (target_has_stack): Rename from target_has_stack_1. * target.h (target_has_stack): Remove macro. (target_has_stack): Rename from target_has_stack_1. |
||
|
Tom Tromey
|
27087b7f6c |
Apply 'const' in more places
Many global arrays in gdb could be marked "const" but are not. This patch changes some of them. (There may be other arrays that could benefit from this treatment. I only examined arrays of strings.) This lets the linker move some symbols to the readonly data section. For example, previously: 0000000000000000 d _ZL18can_use_agent_enum is now: 0000000000000030 r _ZL18can_use_agent_enum 2020-09-14 Tom Tromey <tromey@adacore.com> * x86-tdep.h (x86_in_indirect_branch_thunk): Update. * x86-tdep.c (x86_is_thunk_register_name) (x86_in_indirect_branch_thunk): Update. * sparc64-tdep.c (sparc64_fpu_register_names) (sparc64_cp0_register_names, sparc64_register_names) (sparc64_pseudo_register_names): Now const. * sparc-tdep.h (struct gdbarch_tdep) <fpu_register_names, cp0_registers_num>: Now const. * sparc-tdep.c (sparc_core_register_names) (sparc32_fpu_register_names, sparc32_cp0_register_names) (sparc32_pseudo_register_names): Now const. (validate_tdesc_registers): Update. * rust-lang.c (rust_extensions): Now const. * p-lang.c (p_extensions): Now const. * objc-lang.c (objc_extensions): Now const. * nto-tdep.c (nto_thread_state_str): Now const. * moxie-tdep.c (moxie_register_names): Now const. * mips-tdep.h (struct gdbarch_tdep) <mips_processor_reg_names>: Now const. * mips-tdep.c (mips_generic_reg_names, mips_tx39_reg_names) (mips_linux_reg_names): Now const. (mips_gdbarch_init): Update. * microblaze-tdep.c (microblaze_register_names): Now const. * m68k-tdep.c (m68k_register_names): Now const. * m32r-tdep.c (m32r_register_names): Now const. * ia64-tdep.c (ia64_register_names): Now const. * i386-tdep.h (struct gdbarch_tdep) <register_names, ymmh_register_names, ymm16h_regnum, mpx_register_names, k_register_names, zmmh_register_names, xmm_avx512_register_names, ymm_avx512_register_names, pkeys_register_names>: Now const. * i386-tdep.c (i386_register_names, i386_zmm_names) (i386_zmmh_names, i386_k_names, i386_ymm_names, i386_ymmh_names) (i386_mpx_names, i386_pkeys_names, i386_bnd_names) (i386_mmx_names, i386_byte_names, i386_word_names): Now const. * f-lang.c (f_extensions): Now const. * d-lang.c (d_extensions): Now const. * csky-tdep.c (csky_register_names): Now const. * charset.c (default_charset_names, charset_enum): Now const. (_initialize_charset): Update. * c-lang.c (c_extensions, cplus_extensions, asm_extensions): Now const. * bsd-uthread.c (bsd_uthread_solib_names): Now const. (bsd_uthread_solib_loaded): Update. (bsd_uthread_state): Now const. * amd64-tdep.c (amd64_register_names, amd64_ymm_names) (amd64_ymm_avx512_names, amd64_ymmh_names) (amd64_ymmh_avx512_names, amd64_mpx_names, amd64_k_names) (amd64_zmmh_names, amd64_zmm_names, amd64_xmm_avx512_names) (amd64_pkeys_names, amd64_byte_names, amd64_word_names) (amd64_dword_names): Now const. * agent.c (can_use_agent_enum): Now const. * ada-tasks.c (task_states, long_task_states): Now const. * ada-lang.c (known_runtime_file_name_patterns) (known_auxiliary_function_name_patterns, attribute_names) (standard_exc, ada_extensions): Now const. gdbserver/ChangeLog 2020-09-14 Tom Tromey <tromey@adacore.com> * tracepoint.cc (eval_result_names): Now const. * ax.cc (gdb_agent_op_names): Now const. |
||
|
Tom Tromey
|
78c02f21ad |
Use gdb::function_view in iterate_over_live_ada_tasks
This changes iterate_over_live_ada_tasks to accept a gdb::function_view. This is needed by a subsequent patch. gdb/ChangeLog 2020-08-07 Tom Tromey <tromey@adacore.com> * ada-lang.h (ada_task_list_iterator_ftype): Now a gdb::function_view. (iterate_over_live_ada_tasks): Change type of argument. * ada-tasks.c (iterate_over_live_ada_tasks): Change type of argument. |
||
|
Simon Marchi
|
064d9cb9e7 |
gdb: remove TYPE_LOW_BOUND_UNDEFINED and TYPE_HIGH_BOUND_UNDEFINED
Remove the macros, use the getters of `struct dynamic_prop` instead. gdb/ChangeLog: * gdbtypes.h (TYPE_LOW_BOUND_UNDEFINED, TYPE_HIGH_BOUND_UNDEFINED): Remove. Update all callers to get the bound property's kind and check against PROP_UNDEFINED. Change-Id: I6a7641ac1aa3fa7fca0c21f00556f185f2e2d68c |
||
|
Simon Marchi
|
5537ddd024 |
gdb: remove TYPE_HIGH_BOUND and TYPE_LOW_BOUND
Remove the macros, use the getters of `struct dynamic_prop` instead.
gdb/ChangeLog:
* gdbtypes.h (TYPE_LOW_BOUND, TYPE_HIGH_BOUND): Remove. Update
all callers to use type::range_bounds followed by
dynamic_prop::{low,high}.
Change-Id: I31beeed65d94d81ac4f999244a8b859e2ee961d1
|
||
|
Simon Marchi
|
940da03e32 |
gdb: remove TYPE_FIELD_TYPE macro
Remove the `TYPE_FIELD_TYPE` macro, changing all the call sites to use `type::field` and `field::type` directly. gdb/ChangeLog: * gdbtypes.h (TYPE_FIELD_TYPE): Remove. Change all call sites to use type::field and field::type instead. Change-Id: Ifda6226a25c811cfd334a756a9fbc5c0afdddff3 |
||
|
Simon Marchi
|
3d967001ec |
gdb: remove TYPE_INDEX_TYPE macro
Remove `TYPE_INDEX_TYPE` macro, changing all the call sites to use `type::index_type` directly. gdb/ChangeLog: * gdbtypes.h (TYPE_INDEX_TYPE): Remove. Change all call sites to use type::index_type instead. Change-Id: I56715df0bdec89463cda6bd341dac0e01b2faf84 |
||
|
Simon Marchi
|
7813437494 |
gdb: remove TYPE_CODE macro
Remove TYPE_CODE, changing all the call sites to use type::code directly. This is quite a big diff, but this was mostly done using sed and coccinelle. A few call sites were done by hand. gdb/ChangeLog: * gdbtypes.h (TYPE_CODE): Remove. Change all call sites to use type::code instead. |
||
|
Tom Tromey
|
94c93c35b5 |
Remove ALL_PSPACES
This removes the ALL_PSPACES macro. In this case it seemed cleanest to change how program spaces are stored -- instead of using a linked list, they are now stored in a std::vector. gdb/ChangeLog 2020-05-08 Tom Tromey <tom@tromey.com> * symtab.c (set_symbol_cache_size) (maintenance_print_symbol_cache, maintenance_flush_symbol_cache) (maintenance_print_symbol_cache_statistics): Update. * symmisc.c (print_symbol_bcache_statistics) (print_objfile_statistics, maintenance_print_objfiles) (maintenance_info_symtabs, maintenance_check_symtabs) (maintenance_expand_symtabs, maintenance_info_line_tables): Update. * symfile-debug.c (set_debug_symfile): Update. * source.c (forget_cached_source_info): Update. * python/python.c (gdbpy_progspaces): Update. * psymtab.c (maintenance_info_psymtabs): Update. * probe.c (parse_probes): Update. * linespec.c (iterate_over_all_matching_symtabs) (collect_symtabs_from_filename, search_minsyms_for_name): Update. * guile/scm-progspace.c (gdbscm_progspaces): Update. * exec.c (exec_target::close): Update. * ada-tasks.c (ada_tasks_new_objfile_observer): Update. * breakpoint.c (print_one_breakpoint_location) (create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint): Update. * progspace.c (program_spaces): Now a std::vector. (maybe_new_address_space): Update. (add_program_space): Remove. (program_space::program_space): Update. (remove_program_space): Update. (number_of_program_spaces): Remove. (print_program_space, update_address_spaces): Update. * progspace.h (program_spaces): Change type. (ALL_PSPACES): Remove. (number_of_program_spaces): Don't declare. (struct program_space) <next>: Remove. |
||
|
Tom Tromey
|
f67210ff1c |
Avoid stringop-truncation errors
I configured with -fsanitize=address and built gdb. linux-tdep.c and
ada-tasks.c failed to build due to some stringop-truncation errors,
e.g.:
In function ‘char* strncpy(char*, const char*, size_t)’,
inlined from ‘int linux_fill_prpsinfo(elf_internal_linux_prpsinfo*)’ at ../../binutils-gdb/gdb/linux-tdep.c:1742:11,
inlined from ‘char* linux_make_corefile_notes(gdbarch*, bfd*, int*)’ at ../../binutils-gdb/gdb/linux-tdep.c:1878:27:
/usr/include/bits/string_fortified.h:106:34: error: ‘char* __builtin_strncpy(char*, const char*, long unsigned int)’ specified bound 81 equals destination size [-Werror=stringop-truncation]
This patch fixes the problem by using "sizeof - 1" in the call to
strndup, as recommended in the GCC manual. This doesn't make a
difference here because the next line, in all cases, sets the final
element to '\0' anyway.
gdb/ChangeLog
2020-03-20 Tom Tromey <tromey@adacore.com>
* ada-tasks.c (read_atcb): Use smaller length in strncpy call.
* linux-tdep.c (linux_fill_prpsinfo): Use smaller length in
strncpy call.
|
||
|
Simon Marchi
|
6c2659886f |
gdb: add back declarations for _initialize functions
I'd like to enable the -Wmissing-declarations warning. However, it
warns for every _initialize function, for example:
CXX dcache.o
/home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’:
/home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations]
_initialize_dcache (void)
^~~~~~~~~~~~~~~~~~
The only practical way forward I found is to add back the declarations,
which were removed by this commit:
commit
|
||
Pedro Alves
|
5b6d1e4fa4 |
Multi-target support
This commit adds multi-target support to GDB. What this means is that
with this commit, GDB can now be connected to different targets at the
same time. E.g., you can debug a live native process and a core dump
at the same time, connect to multiple gdbservers, etc.
Actually, the word "target" is overloaded in gdb. We already have a
target stack, with pushes several target_ops instances on top of one
another. We also have "info target" already, which means something
completely different to what this patch does.
So from here on, I'll be using the "target connections" term, to mean
an open process_stratum target, pushed on a target stack. This patch
makes gdb have multiple target stacks, and multiple process_stratum
targets open simultaneously. The user-visible changes / commands will
also use this terminology, but of course it's all open to debate.
User-interface-wise, not that much changes. The main difference is
that each inferior may have its own target connection.
A target connection (e.g., a target extended-remote connection) may
support debugging multiple processes, just as before.
Say you're debugging against gdbserver in extended-remote mode, and
you do "add-inferior" to prepare to spawn a new process, like:
(gdb) target extended-remote :9999
...
(gdb) start
...
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) file a.out
...
(gdb) start
...
At this point, you have two inferiors connected to the same gdbserver.
With this commit, GDB will maintain a target stack per inferior,
instead of a global target stack.
To preserve the behavior above, by default, "add-inferior" makes the
new inferior inherit a copy of the target stack of the current
inferior. Same across a fork - the child inherits a copy of the
target stack of the parent. While the target stacks are copied, the
targets themselves are not. Instead, target_ops is made a
refcounted_object, which means that target_ops instances are
refcounted, which each inferior counting for a reference.
What if you want to create an inferior and connect it to some _other_
target? For that, this commit introduces a new "add-inferior
-no-connection" option that makes the new inferior not share the
current inferior's target. So you could do:
(gdb) target extended-remote :9999
Remote debugging using :9999
...
(gdb) add-inferior -no-connection
[New inferior 2]
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 <null>
(gdb) tar extended-remote :10000
Remote debugging using :10000
...
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 process 18450 target:/home/pedro/tmp/main
(gdb)
A following patch will extended "info inferiors" to include a column
indicating which connection an inferior is bound to, along with a
couple other UI tweaks.
Other than that, debugging is the same as before. Users interact with
inferiors and threads as before. The only difference is that
inferiors may be bound to processes running in different machines.
That's pretty much all there is to it in terms of noticeable UI
changes.
On to implementation.
Since we can be connected to different systems at the same time, a
ptid_t is no longer a unique identifier. Instead a thread can be
identified by a pair of ptid_t and 'process_stratum_target *', the
later being the instance of the process_stratum target that owns the
process/thread. Note that process_stratum_target inherits from
target_ops, and all process_stratum targets inherit from
process_stratum_target. In earlier patches, many places in gdb were
converted to refer to threads by thread_info pointer instead of
ptid_t, but there are still places in gdb where we start with a
pid/tid and need to find the corresponding inferior or thread_info
objects. So you'll see in the patch many places adding a
process_stratum_target parameter to functions that used to take only a
ptid_t.
Since each inferior has its own target stack now, we can always find
the process_stratum target for an inferior. That is done via a
inf->process_target() convenience method.
Since each inferior has its own target stack, we need to handle the
"beneath" calls when servicing target calls. The solution I settled
with is just to make sure to switch the current inferior to the
inferior you want before making a target call. Not relying on global
context is just not feasible in current GDB. Fortunately, there
aren't that many places that need to do that, because generally most
code that calls target methods already has the current context
pointing to the right inferior/thread. Note, to emphasize -- there's
no method to "switch to this target stack". Instead, you switch the
current inferior, and that implicitly switches the target stack.
In some spots, we need to iterate over all inferiors so that we reach
all target stacks.
Native targets are still singletons. There's always only a single
instance of such targets.
Remote targets however, we'll have one instance per remote connection.
The exec target is still a singleton. There's only one instance. I
did not see the point of instanciating more than one exec_target
object.
After vfork, we need to make sure to push the exec target on the new
inferior. See exec_on_vfork.
For type safety, functions that need a {target, ptid} pair to identify
a thread, take a process_stratum_target pointer for target parameter
instead of target_ops *. Some shared code in gdb/nat/ also need to
gain a target pointer parameter. This poses an issue, since gdbserver
doesn't have process_stratum_target, only target_ops. To fix this,
this commit renames gdbserver's target_ops to process_stratum_target.
I think this makes sense. There's no concept of target stack in
gdbserver, and gdbserver's target_ops really implements a
process_stratum-like target.
The thread and inferior iterator functions also gain
process_stratum_target parameters. These are used to be able to
iterate over threads and inferiors of a given target. Following usual
conventions, if the target pointer is null, then we iterate over
threads and inferiors of all targets.
I tried converting "add-inferior" to the gdb::option framework, as a
preparatory patch, but that stumbled on the fact that gdb::option does
not support file options yet, for "add-inferior -exec". I have a WIP
patchset that adds that, but it's not a trivial patch, mainly due to
need to integrate readline's filename completion, so I deferred that
to some other time.
In infrun.c/infcmd.c, the main change is that we need to poll events
out of all targets. See do_target_wait. Right after collecting an
event, we switch the current inferior to an inferior bound to the
target that reported the event, so that target methods can be used
while handling the event. This makes most of the code transparent to
multi-targets. See fetch_inferior_event.
infrun.c:stop_all_threads is interesting -- in this function we need
to stop all threads of all targets. What the function does is send an
asynchronous stop request to all threads, and then synchronously waits
for events, with target_wait, rinse repeat, until all it finds are
stopped threads. Now that we have multiple targets, it's not
efficient to synchronously block in target_wait waiting for events out
of one target. Instead, we implement a mini event loop, with
interruptible_select, select'ing on one file descriptor per target.
For this to work, we need to be able to ask the target for a waitable
file descriptor. Such file descriptors already exist, they are the
descriptors registered in the main event loop with add_file_handler,
inside the target_async implementations. This commit adds a new
target_async_wait_fd target method that just returns the file
descriptor in question. See wait_one / stop_all_threads in infrun.c.
The 'threads_executing' global is made a per-target variable. Since
it is only relevant to process_stratum_target targets, this is where
it is put, instead of in target_ops.
You'll notice that remote.c includes some FIXME notes. These refer to
the fact that the global arrays that hold data for the remote packets
supported are still globals. For example, if we connect to two
different servers/stubs, then each might support different remote
protocol features. They might even be different architectures, like
e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a
host/controller scenario as a single program. That isn't going to
work correctly today, because of said globals. I'm leaving fixing
that for another pass, since it does not appear to be trivial, and I'd
rather land the base work first. It's already useful to be able to
debug multiple instances of the same server (e.g., a distributed
cluster, where you have full control over the servers installed), so I
think as is it's already reasonable incremental progress.
Current limitations:
- You can only resume more that one target at the same time if all
targets support asynchronous debugging, and support non-stop mode.
It should be possible to support mixed all-stop + non-stop
backends, but that is left for another time. This means that
currently in order to do multi-target with gdbserver you need to
issue "maint set target-non-stop on". I would like to make that
mode be the default, but we're not there yet. Note that I'm
talking about how the target backend works, only. User-visible
all-stop mode works just fine.
- As explained above, connecting to different remote servers at the
same time is likely to produce bad results if they don't support the
exact set of RSP features.
FreeBSD updates courtesy of John Baldwin.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@FreeBSD.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::thread_architecture): Adjust.
* ada-tasks.c (print_ada_task_info): Adjust find_thread_ptid call.
(task_command_1): Likewise.
* aix-thread.c (sync_threadlists, aix_thread_target::resume)
(aix_thread_target::wait, aix_thread_target::fetch_registers)
(aix_thread_target::store_registers)
(aix_thread_target::thread_alive): Adjust.
* amd64-fbsd-tdep.c: Include "inferior.h".
(amd64fbsd_get_thread_local_address): Pass down target.
* amd64-linux-nat.c (ps_get_thread_area): Use ps_prochandle
thread's gdbarch instead of target_gdbarch.
* break-catch-sig.c (signal_catchpoint_print_it): Adjust call to
get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* breakpoint.c (breakpoints_should_be_inserted_now): Consider all
inferiors.
(update_inserted_breakpoint_locations): Skip if inferiors with no
execution.
(update_global_location_list): When handling moribund locations,
find representative inferior for location's pspace, and use thread
count of its process_stratum target.
* bsd-kvm.c (bsd_kvm_target_open): Pass target down.
* bsd-uthread.c (bsd_uthread_target::wait): Use
as_process_stratum_target and adjust thread_change_ptid and
add_thread calls.
(bsd_uthread_target::update_thread_list): Use
as_process_stratum_target and adjust find_thread_ptid,
thread_change_ptid and add_thread calls.
* btrace.c (maint_btrace_packet_history_cmd): Adjust
find_thread_ptid call.
* corelow.c (add_to_thread_list): Adjust add_thread call.
(core_target_open): Adjust add_thread_silent and thread_count
calls.
(core_target::pid_to_str): Adjust find_inferior_ptid call.
* ctf.c (ctf_target_open): Adjust add_thread_silent call.
* event-top.c (async_disconnect): Pop targets from all inferiors.
* exec.c (add_target_sections): Push exec target on all inferiors
sharing the program space.
(remove_target_sections): Remove the exec target from all
inferiors sharing the program space.
(exec_on_vfork): New.
* exec.h (exec_on_vfork): Declare.
* fbsd-nat.c (fbsd_add_threads): Add fbsd_nat_target parameter.
Pass it down.
(fbsd_nat_target::update_thread_list): Adjust.
(fbsd_nat_target::resume): Adjust.
(fbsd_handle_debug_trap): Add fbsd_nat_target parameter. Pass it
down.
(fbsd_nat_target::wait, fbsd_nat_target::post_attach): Adjust.
* fbsd-tdep.c (fbsd_corefile_thread): Adjust
get_thread_arch_regcache call.
* fork-child.c (gdb_startup_inferior): Pass target down to
startup_inferior and set_executing.
* gdbthread.h (struct process_stratum_target): Forward declare.
(add_thread, add_thread_silent, add_thread_with_info)
(in_thread_list): Add process_stratum_target parameter.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(find_thread_ptid, thread_change_ptid): Add process_stratum_target
parameter.
(all_threads()): Delete overload.
(all_threads, all_non_exited_threads): Add process_stratum_target
parameter.
(all_threads_safe): Use brace initialization.
(thread_count): Add process_stratum_target parameter.
(set_resumed, set_running, set_stop_requested, set_executing)
(threads_are_executing, finish_thread_state): Add
process_stratum_target parameter.
(switch_to_thread): Use is_current_thread.
* i386-fbsd-tdep.c: Include "inferior.h".
(i386fbsd_get_thread_local_address): Pass down target.
* i386-linux-nat.c (i386_linux_nat_target::low_resume): Adjust.
* inf-child.c (inf_child_target::maybe_unpush_target): Remove
have_inferiors check.
* inf-ptrace.c (inf_ptrace_target::create_inferior)
(inf_ptrace_target::attach): Adjust.
* infcall.c (run_inferior_call): Adjust.
* infcmd.c (run_command_1): Pass target to
scoped_finish_thread_state.
(proceed_thread_callback): Skip inferiors with no execution.
(continue_command): Rename 'all_threads' local to avoid hiding
'all_threads' function. Adjust get_last_target_status call.
(prepare_one_step): Adjust set_running call.
(signal_command): Use user_visible_resume_target. Compare thread
pointers instead of inferior_ptid.
(info_program_command): Adjust to pass down target.
(attach_command): Mark target's 'thread_executing' flag.
(stop_current_target_threads_ns): New, factored out from ...
(interrupt_target_1): ... this. Switch inferior before making
target calls.
* inferior-iter.h
(struct all_inferiors_iterator, struct all_inferiors_range)
(struct all_inferiors_safe_range)
(struct all_non_exited_inferiors_range): Filter on
process_stratum_target too. Remove explicit.
* inferior.c (inferior::inferior): Push dummy target on target
stack.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors):
Add process_stratum_target parameter, and pass it down.
(have_live_inferiors): Adjust.
(switch_to_inferior_and_push_target): New.
(add_inferior_command, clone_inferior_command): Handle
"-no-connection" parameter. Use
switch_to_inferior_and_push_target.
(_initialize_inferior): Mention "-no-connection" option in
the help of "add-inferior" and "clone-inferior" commands.
* inferior.h: Include "process-stratum-target.h".
(interrupt_target_1): Use bool.
(struct inferior) <push_target, unpush_target, target_is_pushed,
find_target_beneath, top_target, process_target, target_at,
m_stack>: New.
(discard_all_inferiors): Delete.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors)
(all_inferiors, all_non_exited_inferiors): Add
process_stratum_target parameter.
* infrun.c: Include "gdb_select.h" and <unordered_map>.
(target_last_proc_target): New global.
(follow_fork_inferior): Push target on new inferior. Pass target
to add_thread_silent. Call exec_on_vfork. Handle target's
reference count.
(follow_fork): Adjust get_last_target_status call. Also consider
target.
(follow_exec): Push target on new inferior.
(struct execution_control_state) <target>: New field.
(user_visible_resume_target): New.
(do_target_resume): Call target_async.
(resume_1): Set target's threads_executing flag. Consider resume
target.
(commit_resume_all_targets): New.
(proceed): Also consider resume target. Skip threads of inferiors
with no execution. Commit resumtion in all targets.
(start_remote): Pass current inferior to wait_for_inferior.
(infrun_thread_stop_requested): Consider target as well. Pass
thread_info pointer to clear_inline_frame_state instead of ptid.
(infrun_thread_thread_exit): Consider target as well.
(random_pending_event_thread): New inferior parameter. Use it.
(do_target_wait): Rename to ...
(do_target_wait_1): ... this. Add inferior parameter, and pass it
down.
(threads_are_resumed_pending_p, do_target_wait): New.
(prepare_for_detach): Adjust calls.
(wait_for_inferior): New inferior parameter. Handle it. Use
do_target_wait_1 instead of do_target_wait.
(fetch_inferior_event): Adjust. Switch to representative
inferior. Pass target down.
(set_last_target_status): Add process_stratum_target parameter.
Save target in global.
(get_last_target_status): Add process_stratum_target parameter and
handle it.
(nullify_last_target_wait_ptid): Clear 'target_last_proc_target'.
(context_switch): Check inferior_ptid == null_ptid before calling
inferior_thread().
(get_inferior_stop_soon): Pass down target.
(wait_one): Rename to ...
(poll_one_curr_target): ... this.
(struct wait_one_event): New.
(wait_one): New.
(stop_all_threads): Adjust.
(handle_no_resumed, handle_inferior_event): Adjust to consider the
event's target.
(switch_back_to_stepped_thread): Also consider target.
(print_stop_event): Update.
(normal_stop): Update. Also consider the resume target.
* infrun.h (wait_for_inferior): Remove declaration.
(user_visible_resume_target): New declaration.
(get_last_target_status, set_last_target_status): New
process_stratum_target parameter.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter, and use it.
(clear_inline_frame_state (thread_info*)): New.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter.
(clear_inline_frame_state (thread_info*)): Declare.
* linux-fork.c (delete_checkpoint_command): Pass target down to
find_thread_ptid.
(checkpoint_command): Adjust.
* linux-nat.c (linux_nat_target::follow_fork): Switch to thread
instead of just tweaking inferior_ptid.
(linux_nat_switch_fork): Pass target down to thread_change_ptid.
(exit_lwp): Pass target down to find_thread_ptid.
(attach_proc_task_lwp_callback): Pass target down to
add_thread/set_running/set_executing.
(linux_nat_target::attach): Pass target down to
thread_change_ptid.
(get_detach_signal): Pass target down to find_thread_ptid.
Consider last target status's target.
(linux_resume_one_lwp_throw, resume_lwp)
(linux_handle_syscall_trap, linux_handle_extended_wait, wait_lwp)
(stop_wait_callback, save_stop_reason, linux_nat_filter_event)
(linux_nat_wait_1, resume_stopped_resumed_lwps): Pass target down.
(linux_nat_target::async_wait_fd): New.
(linux_nat_stop_lwp, linux_nat_target::thread_address_space): Pass
target down.
* linux-nat.h (linux_nat_target::async_wait_fd): Declare.
* linux-tdep.c (get_thread_arch_regcache): Pass target down.
* linux-thread-db.c (struct thread_db_info::process_target): New
field.
(add_thread_db_info): Save target.
(get_thread_db_info): New process_stratum_target parameter. Also
match target.
(delete_thread_db_info): New process_stratum_target parameter.
Also match target.
(thread_from_lwp): Adjust to pass down target.
(thread_db_notice_clone): Pass down target.
(check_thread_db_callback): Pass down target.
(try_thread_db_load_1): Always push the thread_db target.
(try_thread_db_load, record_thread): Pass target down.
(thread_db_target::detach): Pass target down. Always unpush the
thread_db target.
(thread_db_target::wait, thread_db_target::mourn_inferior): Pass
target down. Always unpush the thread_db target.
(find_new_threads_callback, thread_db_find_new_threads_2)
(thread_db_target::update_thread_list): Pass target down.
(thread_db_target::pid_to_str): Pass current inferior down.
(thread_db_target::get_thread_local_address): Pass target down.
(thread_db_target::resume, maintenance_check_libthread_db): Pass
target down.
* nto-procfs.c (nto_procfs_target::update_thread_list): Adjust.
* procfs.c (procfs_target::procfs_init_inferior): Declare.
(proc_set_current_signal, do_attach, procfs_target::wait): Adjust.
(procfs_init_inferior): Rename to ...
(procfs_target::procfs_init_inferior): ... this and adjust.
(procfs_target::create_inferior, procfs_notice_thread)
(procfs_do_thread_registers): Adjust.
* ppc-fbsd-tdep.c: Include "inferior.h".
(ppcfbsd_get_thread_local_address): Pass down target.
* proc-service.c (ps_xfer_memory): Switch current inferior and
program space as well.
(get_ps_regcache): Pass target down.
* process-stratum-target.c
(process_stratum_target::thread_address_space)
(process_stratum_target::thread_architecture): Pass target down.
* process-stratum-target.h
(process_stratum_target::threads_executing): New field.
(as_process_stratum_target): New.
* ravenscar-thread.c
(ravenscar_thread_target::update_inferior_ptid): Pass target down.
(ravenscar_thread_target::wait, ravenscar_add_thread): Pass target
down.
* record-btrace.c (record_btrace_target::info_record): Adjust.
(record_btrace_target::record_method)
(record_btrace_target::record_is_replaying)
(record_btrace_target::fetch_registers)
(get_thread_current_frame_id, record_btrace_target::resume)
(record_btrace_target::wait, record_btrace_target::stop): Pass
target down.
* record-full.c (record_full_wait_1): Switch to event thread.
Pass target down.
* regcache.c (regcache::regcache)
(get_thread_arch_aspace_regcache, get_thread_arch_regcache): Add
process_stratum_target parameter and handle it.
(current_thread_target): New global.
(get_thread_regcache): Add process_stratum_target parameter and
handle it. Switch inferior before calling target method.
(get_thread_regcache): Pass target down.
(get_thread_regcache_for_ptid): Pass target down.
(registers_changed_ptid): Add process_stratum_target parameter and
handle it.
(registers_changed_thread, registers_changed): Pass target down.
(test_get_thread_arch_aspace_regcache): New.
(current_regcache_test): Define a couple local test_target_ops
instances and use them for testing.
(readwrite_regcache): Pass process_stratum_target parameter.
(cooked_read_test, cooked_write_test): Pass mock_target down.
* regcache.h (get_thread_regcache, get_thread_arch_regcache)
(get_thread_arch_aspace_regcache): Add process_stratum_target
parameter.
(regcache::target): New method.
(regcache::regcache, regcache::get_thread_arch_aspace_regcache)
(regcache::registers_changed_ptid): Add process_stratum_target
parameter.
(regcache::m_target): New field.
(registers_changed_ptid): Add process_stratum_target parameter.
* remote.c (remote_state::supports_vCont_probed): New field.
(remote_target::async_wait_fd): New method.
(remote_unpush_and_throw): Add remote_target parameter.
(get_current_remote_target): Adjust.
(remote_target::remote_add_inferior): Push target.
(remote_target::remote_add_thread)
(remote_target::remote_notice_new_inferior)
(get_remote_thread_info): Pass target down.
(remote_target::update_thread_list): Skip threads of inferiors
bound to other targets. (remote_target::close): Don't discard
inferiors. (remote_target::add_current_inferior_and_thread)
(remote_target::process_initial_stop_replies)
(remote_target::start_remote)
(remote_target::remote_serial_quit_handler): Pass down target.
(remote_target::remote_unpush_target): New remote_target
parameter. Unpush the target from all inferiors.
(remote_target::remote_unpush_and_throw): New remote_target
parameter. Pass it down.
(remote_target::open_1): Check whether the current inferior has
execution instead of checking whether any inferior is live. Pass
target down.
(remote_target::remote_detach_1): Pass down target. Use
remote_unpush_target.
(extended_remote_target::attach): Pass down target.
(remote_target::remote_vcont_probe): Set supports_vCont_probed.
(remote_target::append_resumption): Pass down target.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc, remote_target::resume)
(remote_target::commit_resume): Pass down target.
(remote_target::remote_stop_ns): Check supports_vCont_probed.
(remote_target::interrupt_query)
(remote_target::remove_new_fork_children)
(remote_target::check_pending_events_prevent_wildcard_vcont)
(remote_target::remote_parse_stop_reply)
(remote_target::process_stop_reply): Pass down target.
(first_remote_resumed_thread): New remote_target parameter. Pass
it down.
(remote_target::wait_as): Pass down target.
(unpush_and_perror): New remote_target parameter. Pass it down.
(remote_target::readchar, remote_target::remote_serial_write)
(remote_target::getpkt_or_notif_sane_1)
(remote_target::kill_new_fork_children, remote_target::kill): Pass
down target.
(remote_target::mourn_inferior): Pass down target. Use
remote_unpush_target.
(remote_target::core_of_thread)
(remote_target::remote_btrace_maybe_reopen): Pass down target.
(remote_target::pid_to_exec_file)
(remote_target::thread_handle_to_thread_info): Pass down target.
(remote_target::async_wait_fd): New.
* riscv-fbsd-tdep.c: Include "inferior.h".
(riscv_fbsd_get_thread_local_address): Pass down target.
* sol2-tdep.c (sol2_core_pid_to_str): Pass down target.
* sol-thread.c (sol_thread_target::wait, ps_lgetregs, ps_lsetregs)
(ps_lgetfpregs, ps_lsetfpregs, sol_update_thread_list_callback):
Adjust.
* solib-spu.c (spu_skip_standalone_loader): Pass down target.
* solib-svr4.c (enable_break): Pass down target.
* spu-multiarch.c (parse_spufs_run): Pass down target.
* spu-tdep.c (spu2ppu_sniffer): Pass down target.
* target-delegates.c: Regenerate.
* target.c (g_target_stack): Delete.
(current_top_target): Return the current inferior's top target.
(target_has_execution_1): Refer to the passed-in inferior's top
target.
(target_supports_terminal_ours): Check whether the initial
inferior was already created.
(decref_target): New.
(target_stack::push): Incref/decref the target.
(push_target, push_target, unpush_target): Adjust.
(target_stack::unpush): Defref target.
(target_is_pushed): Return bool. Adjust to refer to the current
inferior's target stack.
(dispose_inferior): Delete, and inline parts ...
(target_preopen): ... here. Only dispose of the current inferior.
(target_detach): Hold strong target reference while detaching.
Pass target down.
(target_thread_name): Add assertion.
(target_resume): Pass down target.
(target_ops::beneath, find_target_at): Adjust to refer to the
current inferior's target stack.
(get_dummy_target): New.
(target_pass_ctrlc): Pass the Ctrl-C to the first inferior that
has a thread running.
(initialize_targets): Rename to ...
(_initialize_target): ... this.
* target.h: Include "gdbsupport/refcounted-object.h".
(struct target_ops): Inherit refcounted_object.
(target_ops::shortname, target_ops::longname): Make const.
(target_ops::async_wait_fd): New method.
(decref_target): Declare.
(struct target_ops_ref_policy): New.
(target_ops_ref): New typedef.
(get_dummy_target): Declare function.
(target_is_pushed): Return bool.
* thread-iter.c (all_matching_threads_iterator::m_inf_matches)
(all_matching_threads_iterator::all_matching_threads_iterator):
Handle filter target.
* thread-iter.h (struct all_matching_threads_iterator, struct
all_matching_threads_range, class all_non_exited_threads_range):
Filter by target too. Remove explicit.
* thread.c (threads_executing): Delete.
(inferior_thread): Pass down current inferior.
(clear_thread_inferior_resources): Pass down thread pointer
instead of ptid_t.
(add_thread_silent, add_thread_with_info, add_thread): Add
process_stratum_target parameter. Use it for thread and inferior
searches.
(is_current_thread): New.
(thread_info::deletable): Use it.
(find_thread_ptid, thread_count, in_thread_list)
(thread_change_ptid, set_resumed, set_running): New
process_stratum_target parameter. Pass it down.
(set_executing): New process_stratum_target parameter. Pass it
down. Adjust reference to 'threads_executing'.
(threads_are_executing): New process_stratum_target parameter.
Adjust reference to 'threads_executing'.
(set_stop_requested, finish_thread_state): New
process_stratum_target parameter. Pass it down.
(switch_to_thread): Also match inferior.
(switch_to_thread): New process_stratum_target parameter. Pass it
down.
(update_threads_executing): Reimplement.
* top.c (quit_force): Pop targets from all inferior.
(gdb_init): Don't call initialize_targets.
* windows-nat.c (windows_nat_target) <get_windows_debug_event>:
Declare.
(windows_add_thread, windows_delete_thread): Adjust.
(get_windows_debug_event): Rename to ...
(windows_nat_target::get_windows_debug_event): ... this. Adjust.
* tracefile-tfile.c (tfile_target_open): Pass down target.
* gdbsupport/common-gdbthread.h (struct process_stratum_target):
Forward declare.
(switch_to_thread): Add process_stratum_target parameter.
* mi/mi-interp.c (mi_on_resume_1): Add process_stratum_target
parameter. Use it.
(mi_on_resume): Pass target down.
* nat/fork-inferior.c (startup_inferior): Add
process_stratum_target parameter. Pass it down.
* nat/fork-inferior.h (startup_inferior): Add
process_stratum_target parameter.
* python/py-threadevent.c (py_get_event_thread): Pass target down.
gdb/gdbserver/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* fork-child.c (post_fork_inferior): Pass target down to
startup_inferior.
* inferiors.c (switch_to_thread): Add process_stratum_target
parameter.
* lynx-low.c (lynx_target_ops): Now a process_stratum_target.
* nto-low.c (nto_target_ops): Now a process_stratum_target.
* linux-low.c (linux_target_ops): Now a process_stratum_target.
* remote-utils.c (prepare_resume_reply): Pass the target to
switch_to_thread.
* target.c (the_target): Now a process_stratum_target.
(done_accessing_memory): Pass the target to switch_to_thread.
(set_target_ops): Ajust to use process_stratum_target.
* target.h (struct target_ops): Rename to ...
(struct process_stratum_target): ... this.
(the_target, set_target_ops): Adjust.
(prepare_to_access_memory): Adjust comment.
* win32-low.c (child_xfer_memory): Adjust to use
process_stratum_target.
(win32_target_ops): Now a process_stratum_target.
|
||
|
Joel Brobecker
|
b811d2c292 |
Update copyright year range in all GDB files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
||
|
Tom Tromey
|
c83d8d32c9 |
Avoid crash in print_ada_task_info
In MI mode, print_ada_task_info can crash in find_thread_ptid when trying to print an Ada task that is no longer alive. This patch avoids the problem by checking for this case. Because this is Ada-specific, and because Joel approved it internally, I am checking it in. gdb/ChangeLog 2019-11-22 Tom Tromey <tromey@adacore.com> * ada-tasks.c (ada_task_is_alive): Make parameter const. (print_ada_task_info): Don't try to fetch thread id if task is not alive. gdb/gdbserver/ChangeLog 2019-11-22 Tom Tromey <tromey@adacore.com> * gdb.ada/tasks.exp: Add -ada-task-info regression test. * gdb.ada/tasks/foo.adb: Add another stopping location. Change-Id: If25eae6507eebb7537eb8adbcbaa1fc1eec88f5c |
||
Christian Biesinger
|
c9d95fa3d0 |
Replace the MSYMBOL_*_NAME macros with member functions
Improves readability. In the future, it will also allow making the name private, once the name setter functions become member functions. gdb/ChangeLog: 2019-11-22 Christian Biesinger <cbiesinger@google.com> * ada-lang.c (ada_lookup_simple_minsym): Update. (ada_collect_symbol_completion_matches): Update. * ada-tasks.c (read_atcb): Update. * amd64-windows-tdep.c (amd64_skip_main_prologue): Update. (amd64_windows_skip_trampoline_code): Update. * arm-tdep.c (skip_prologue_function): Update. (arm_skip_stack_protector): Update. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update. (arm_wince_skip_main_prologue): Update. * ax-gdb.c (gen_expr): Update. * block.c (call_site_for_pc): Update. * blockframe.c (find_pc_partial_function): Update. * breakpoint.c (set_breakpoint_location_function): Update. * btrace.c (ftrace_print_function_name): Update. (ftrace_function_switched): Update. * c-valprint.c (print_unpacked_pointer): Update. * coffread.c (coff_symfile_read): Update. * compile/compile-c-symbols.c (convert_symbol_bmsym): Update. * compile/compile-cplus-symbols.c (convert_symbol_bmsym): Update. * dwarf-index-write.c (write_psymbols): Update. * dwarf2loc.c (call_site_to_target_addr): Update. (func_verify_no_selftailcall): Update. (tailcall_dump): Update. (call_site_find_chain_1): Update. (dwarf_expr_reg_to_entry_parameter): Update. * elfread.c (elf_gnu_ifunc_record_cache): Update. * eval.c (evaluate_funcall): Update. (evaluate_subexp_standard): Update. (evaluate_subexp_for_sizeof): Update. * expprint.c (print_subexp_standard): Update. (dump_subexp_body_standard): Update. * frame.c (get_prev_frame_always_1): Update. * frv-tdep.c (frv_skip_main_prologue): Update. * gnu-v2-abi.c (gnuv2_value_rtti_type): Update. * gnu-v3-abi.c (gnuv3_rtti_type): Update. (gnuv3_get_typename_from_type_info): Update. (gnuv3_skip_trampoline): Update. * hppa-tdep.c (hppa_lookup_stub_minimal_symbol): Update. * i386-tdep.c (i386_skip_main_prologue): Update. (i386_pe_skip_trampoline_code): Update. * ia64-tdep.c (ia64_convert_from_func_ptr_addr): Update. * infcall.c (get_function_name): Update. * linespec.c (minsym_found): Update. * linux-fork.c (info_checkpoints_command): Update. * m32c-tdep.c (m32c_m16c_address_to_pointer): Update. (m32c_m16c_pointer_to_address): Update. * maint.c (maintenance_translate_address): Update. * minsyms.c (add_minsym_to_hash_table): Update. (add_minsym_to_demangled_hash_table): Update. (lookup_minimal_symbol_mangled): Update. (lookup_minimal_symbol_demangled): Update. (lookup_minimal_symbol_linkage): Update. (lookup_minimal_symbol_text): Update. (lookup_minimal_symbol_by_pc_name): Update. (minimal_symbol_is_less_than): Update. (compact_minimal_symbols): Update. (build_minimal_symbol_hash_tables): Update. (find_solib_trampoline_target): Update. * mips-tdep.c (mips_stub_frame_sniffer): Update. (mips_skip_pic_trampoline_code): Update. * msp430-tdep.c (msp430_skip_trampoline_code): Update. * objc-lang.c (info_selectors_command): Update. (info_classes_command): Update. (find_methods): Update. (find_imps): Update. * p-valprint.c (pascal_val_print): Update. * ppc-linux-tdep.c (powerpc_linux_in_dynsym_resolve_code): Update. * ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update. * printcmd.c (build_address_symbolic): Update. (info_symbol_command): Update. * psymtab.c (psymbol_name_matches): Update. (match_partial_symbol): Update. (lookup_partial_symbol): Update. (print_partial_symbols): Update. (sort_pst_symbols): Update. (maintenance_check_psymtabs): Update. * python/py-framefilter.c (py_print_frame): Update. * python/python.c (gdbpy_rbreak): Update. * record-btrace.c (btrace_get_bfun_name): Update. (btrace_call_history): Update. * rs6000-tdep.c (rs6000_skip_main_prologue): Update. (rs6000_skip_trampoline_code): Update. * sol-thread.c (info_cb): Update. * stabsread.c (scan_file_globals): Update. * stack.c (find_frame_funname): Update. (info_frame_command_core): Update. * symmisc.c (dump_msymbols): Update. * symtab.c (symbol_natural_name): Rename to.., (general_symbol_info::natural_name): ...this. (symbol_demangled_name): Rename to... (general_symbol_info::demangled_name): ...this. (symbol_search_name): Rename to... (general_symbol_info::search_name): ...this. (symbol_matches_search_name): Update. (find_pc_sect_line): Update. (skip_prologue_sal): Update. (search_symbols): Update. (print_msymbol_info): Update. (rbreak_command): Update. (completion_list_add_msymbol): Update. (completion_list_objc_symbol): Update. (get_msymbol_address): Update. * symtab.h (struct general_symbol_info): Add member functions natural_name (), linkage_name (), print_name (), demangled_name (), and search_name (). (SYMBOL_NATURAL_NAME): Update. (symbol_natural_name): Move to a member function on general_symbol_info. (SYMBOL_DEMANGLED_NAME): Update. (symbol_demangled_name): Move to a member function on general_symbol_info. (SYMBOL_SEARCH_NAME): Update. (symbol_search_name): Move to a member function on general_symbol_info. (MSYMBOL_NATURAL_NAME): Remove. (MSYMBOL_LINKAGE_NAME): Remove. (MSYMBOL_PRINT_NAME): Remove. (MSYMBOL_DEMANGLED_NAME): Remove. (MSYMBOL_SEARCH_NAME): Remove. * x86-tdep.c (x86_in_indirect_branch_thunk): Update. Change-Id: I65aa529843a9903e174ce799037e41f954a9fcee |
||
Tom de Vries
|
85102364b2 |
[gdb] Fix more typos in comments
Fix typos in comments. NFC. Tested on x86_64-linux. gdb/ChangeLog: 2019-10-18 Tom de Vries <tdevries@suse.de> * aarch64-tdep.c: Fix typos in comments. * ada-lang.c: Same. * ada-tasks.c: Same. * alpha-tdep.c: Same. * alpha-tdep.h: Same. * amd64-nat.c: Same. * amd64-windows-tdep.c: Same. * arc-tdep.c: Same. * arc-tdep.h: Same. * arch-utils.c: Same. * arm-nbsd-tdep.c: Same. * arm-tdep.c: Same. * ax-gdb.c: Same. * blockframe.c: Same. * btrace.c: Same. * c-varobj.c: Same. * coff-pe-read.c: Same. * coffread.c: Same. * cris-tdep.c: Same. * darwin-nat.c: Same. * dbxread.c: Same. * dcache.c: Same. * disasm.c: Same. * dtrace-probe.c: Same. * dwarf-index-write.c: Same. * dwarf2-frame-tailcall.c: Same. * dwarf2-frame.c: Same. * dwarf2read.c: Same. * eval.c: Same. * exceptions.c: Same. * fbsd-tdep.c: Same. * findvar.c: Same. * frame.c: Same. * frv-tdep.c: Same. * gnu-v3-abi.c: Same. * go32-nat.c: Same. * h8300-tdep.c: Same. * hppa-tdep.c: Same. * i386-linux-tdep.c: Same. * i386-tdep.c: Same. * ia64-libunwind-tdep.c: Same. * ia64-tdep.c: Same. * infcmd.c: Same. * infrun.c: Same. * linespec.c: Same. * linux-nat.c: Same. * linux-thread-db.c: Same. * machoread.c: Same. * mdebugread.c: Same. * mep-tdep.c: Same. * mn10300-tdep.c: Same. * namespace.c: Same. * objfiles.c: Same. * opencl-lang.c: Same. * or1k-tdep.c: Same. * osabi.c: Same. * ppc-linux-nat.c: Same. * ppc-linux-tdep.c: Same. * ppc-sysv-tdep.c: Same. * printcmd.c: Same. * procfs.c: Same. * record-btrace.c: Same. * record-full.c: Same. * remote-fileio.c: Same. * remote.c: Same. * rs6000-tdep.c: Same. * s12z-tdep.c: Same. * score-tdep.c: Same. * ser-base.c: Same. * ser-go32.c: Same. * skip.c: Same. * sol-thread.c: Same. * solib-svr4.c: Same. * solib.c: Same. * source.c: Same. * sparc-nat.c: Same. * sparc-sol2-tdep.c: Same. * sparc-tdep.c: Same. * sparc64-tdep.c: Same. * stabsread.c: Same. * stack.c: Same. * symfile.c: Same. * symtab.c: Same. * target-descriptions.c: Same. * target-float.c: Same. * thread.c: Same. * utils.c: Same. * valops.c: Same. * valprint.c: Same. * value.c: Same. * varobj.c: Same. * windows-nat.c: Same. * xcoffread.c: Same. * xstormy16-tdep.c: Same. * xtensa-tdep.c: Same. Change-Id: I5175f1b107bfa4e1cdd4a3361ccb4739e53c75c4 |
||
|
Tom Tromey
|
7f6aba03b9 |
Introduce metadata style
This introduces a new "metadata" style and changes many places in gdb to use it. The idea here is to let the user distinguish gdb output from output that (conceptually at least) comes directly from the inferior. The newly-styled category includes text that gdb traditionally surrounds in "<...>", like "<unavailable>". I only added a single test for this. In many cases this output is difficult to test. Also, while developing this errors in the implementation of the new printf formats showed up as regressions. gdb/ChangeLog 2019-10-01 Tom Tromey <tom@tromey.com> * p-lang.c (pascal_printstr): Use metadata style. * value.c (show_convenience): Use metadata style. * valprint.c (valprint_check_validity, val_print_optimized_out) (val_print_not_saved, val_print_unavailable) (val_print_invalid_address, generic_val_print, val_print) (value_check_printable, val_print_array_elements): Use metadata style. * ui-out.h (class ui_out) <field_fmt>: New overload. <do_field_fmt>: Add style parameter. * ui-out.c (ui_out::field_fmt): New overload. * typeprint.c (type_print_unknown_return_type) (val_print_not_allocated, val_print_not_associated): Use metadata style. * tui/tui-out.h (class tui_ui_out) <do_field_fmt>: Add style parameter. * tui/tui-out.c (tui_ui_out::do_field_fmt): Update. * tracepoint.c (tvariables_info_1): Use metadata style. * stack.c (print_frame_arg, print_frame_info, print_frame) (info_frame_command_core): Use metadata style. * skip.c (info_skip_command): Use metadata style. * rust-lang.c (rust_print_enum): Use metadata style. * python/py-prettyprint.c (print_stack_unless_memory_error): Use metadata style. * python/py-framefilter.c (py_print_single_arg): Use metadata style. * printcmd.c (do_one_display, print_variable_and_value): Use metadata style. * p-valprint.c (pascal_val_print) (pascal_object_print_value_fields): Use metadata style. * p-typeprint.c (pascal_type_print_base): Use metadata style. * mi/mi-out.h (class mi_ui_out) <do_field_fmt>: Add style parameter. * mi/mi-out.c (mi_ui_out::do_field_fmt): Update. * m2-valprint.c (m2_print_long_set): Use metadata style. * m2-typeprint.c (m2_print_type): Use metadata style. * infcmd.c (print_return_value_1): Use metadata style. * gnu-v3-abi.c (print_one_vtable): Use metadata style. * f-valprint.c (info_common_command_for_block): Use metadata style. * f-typeprint.c (f_type_print_base): Use metadata style. * expprint.c (print_subexp_standard): Use metadata style. * cp-valprint.c (cp_print_value_fields): Use metadata style. * cli/cli-style.h (class cli_style_option): Add constructor. (metadata_style): Declare. * cli/cli-style.c (metadata_style): New global. (_initialize_cli_style): Register metadata style. * cli-out.h (class cli_ui_out) <do_field_fmt>: Add style parameter. * cli-out.c (cli_ui_out::do_field_fmt): Update. * c-typeprint.c (c_type_print_base_struct_union) (c_type_print_base_1): Use metadata style. * breakpoint.c (watchpoint_value_print) (print_one_breakpoint_location): Use metadata style. * break-catch-syscall.c (print_one_catch_syscall): Use metadata style. * break-catch-sig.c (signal_catchpoint_print_one): Use metadata style. * ada-valprint.c (val_print_packed_array_elements, printstr) (print_field_values, ada_val_print_ref, ada_val_print): Use metadata style. * ada-typeprint.c (print_array_type, ada_print_type): Use metadata style. * ada-tasks.c (print_ada_task_info, info_task): Use metadata style. * ada-lang.c (user_select_syms): Use metadata style. gdb/testsuite/ChangeLog 2019-10-01 Tom Tromey <tom@tromey.com> * lib/gdb-utils.exp (style): Handle "metadata" argument. * gdb.base/style.exp: Add metadata style test. |
||
|
Joel Brobecker
|
7433218996 |
(Ada) do not print Ada task names in quotes in "info tasks" output
A recent change enhanced a couple of notifications about Ada tasks to
include the task's name in addition to the task's number. That change
also modified the output of the "info tasks" when printing the detailed
information of one given task. I believe this change was unintentionally
left over from the initial version after it was decided that quoting
the task's name should not be done. This patch therefore undoes this
part of the patch.
gdb/ChangeLog:
* ada-tasks.c (info_task): Remove quoting of the task's name.
Tested on x86_64-linux, with both the official testsuite as well as
AdaCore's testsuite.
|
||
Philippe Waroquiers
|
4993045d18 |
Output the Ada task name in more messages.
With this patch, we e.g. get:
[Switching to task 2 "task_list(1)"]
[Current task is 2 "task_list(1)"]
instead of
[Switching to task 2]
[Current task is 2]
The logic to produce the taskno optionally followed
by the task name has been factorized in the task_to_str function.
Task names are output between double quotes in the new messages,
similarly to what GDB does for thread names.
However, no quotes are put around task names in 'info tasks' Name column.
This was discussed with Tom, that preferred no quotes there, while I
was more in favour of visual consistency.
I discussed with a few more users, which led to (exactly) 50% preferring
quotes and 50% preferring no quotes :).
To arrive to the decision to remove the quotes, the following "killing args"
were used:
* To have quotes or to not have quotes, that is the question; yes
but not *THE* question :).
* If there is not a clear majority that prefers quotes, better to
not disturb the existing user basis for a (somewhat) irrelevant
aspect.
* The opinion of the reviewer has more weight.
So, compared to the previous version, this version remotes the quotes
in 'info tasks'.
It improves the alignement of 'info tasks' output.
With this patch, we get:
(gdb) info task
ID TID P-ID Pri State Name
* 1 555555759030 48 Runnable main_task
2 555555759e30 1 48 Selective Wait mit
(gdb)
instead of
(gdb) info task
ID TID P-ID Pri State Name
* 1 555555759030 48 Runnable main_task
2 555555759e30 1 48 Selective Wait mit
(gdb)
(e.g. the first one properly shows parent and priority under the
correct header).
This is version 4 of the 'task name' patch.
Compared to version 3, the changes are:
output task names between quotes but not in 'info tasks'
gdb/ChangeLog
2019-09-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Announce that Ada task names are now shown at more places,
and between quotes (except in info task output).
* gdb/ada-tasks.c (task_to_str): New function.
(display_current_task_id): Call task_to_str.
(task_command_1): Likewise.
(print_ada_task_info): In non-mi mode, Properly align headers and data
when task-id length is > 9 (9 is the default for a 32 bits CORE_ADDR).
gdb/doc/ChangeLog
2019-09-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Ada Tasks): Tell the task name is printed, update
examples.
gdb/testsuite/ChangeLog
2019-09-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.ada/rdv_wait.exp: Update to new task names.
* gdb.base/task_switch_in_core.exp: Likewise.
* gdb.base/info_sources_base.c: Likewise.
|
||
|
Philippe Waroquiers
|
590042fc45 |
Make first and last lines of 'command help documentation' consistent.
With this patch, the help docs now respect 2 invariants: * The first line of a command help is terminated by a '.' character. * The last character of a command help is not a newline character. Note that the changes for the last invariant were done by Tom, as part of : [PATCH] Remove trailing newlines from help text https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html but some occurrences have been re-introduced since then. Some help docs had to be rephrased/restructured to respect the above invariants. Before this patch, print_doc_line was printing the first line of a command help documentation, but stopping at the first '.' or ',' character. This was giving inconsistent results : * The first line of command helps was sometimes '.' terminated, sometimes not. * The first line of command helps was not always designed to be readable/understandable/unambiguous when stopping at the first '.' or ',' character. This e.g. created the following inconsistencies/problems: < catch exception -- Catch Ada exceptions < catch handlers -- Catch Ada exceptions < catch syscall -- Catch system calls by their names < down-silently -- Same as the `down' command while the new help is: > catch exception -- Catch Ada exceptions, when raised. > catch handlers -- Catch Ada exceptions, when handled. > catch syscall -- Catch system calls by their names, groups and/or numbers. > down-silently -- Same as the `down' command, but does not print anything. Also, the command help doc should not be terminated by a newline character, but this was not respected by all commands. The cli-option -OPT framework re-introduced some occurences. So, the -OPT build help framework was changed to not output newlines at the end of %OPTIONS% replacement. This patch changes the help documentations to ensure the 2 invariants given above. It implied to slightly rephrase or restructure some help docs. Based on the above invariants, print_doc_line (called by 'apropos' and 'help' commands to print the first line of a command help) now outputs the full first line of a command help. This all results in a lot of small changes in the produced help docs. There are less code changes than changes in the help docs, as a lot of docs are produced by some code (e.g. the remote packet usage settings). gdb/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * cli/cli-decode.h (print_doc_line): Add for_value_prefix argument. * cli/cli-decode.c (print_doc_line): Likewise. It now prints the full first line, except when FOR_VALUE_PREFIX. In this case, the trailing '.' is not output, and the first character is uppercased. (print_help_for_command): Update call to print_doc_line. (print_doc_of_command): Likewise. * cli/cli-setshow.c (deprecated_show_value_hack): Likewise. * cli/cli-option.c (append_indented_doc): Do not append newline. (build_help_option): Append newline after first appended_indented_doc only if a second call is done. (build_help): Append 2 new lines before each option, except the first one. * compile/compile.c (_initialize_compile): Add new lines after %OPTIONS%, when not at the end of the help. Change help doc or code producing the help doc to respect the invariants. * maint-test-options.c (_initialize_maint_test_options): Likewise. Also removed the new line after 'Options:', as all other commands do not put an empty line between 'Options:' and the first option. * printcmd.c (_initialize_printcmd): Likewise. * stack.c (_initialize_stack): Likewise. * interps.c (interpreter_exec_cmd): Fix "Usage:" line that was incorrectly telling COMMAND is optional. * ada-lang.c (_initialize_ada_language): Change help doc or code producing the help doc to respect the invariants. * ada-tasks.c (_initialize_ada_tasks): Likewise. * breakpoint.c (_initialize_breakpoint): Likewise. * cli/cli-cmds.c (_initialize_cli_cmds): Likewise. * cli/cli-logging.c (_initialize_cli_logging): Likewise. * cli/cli-setshow.c (_initialize_cli_setshow): Likewise. * cli/cli-style.c (cli_style_option::add_setshow_commands, _initialize_cli_style): Likewise. * corelow.c (core_target_info): Likewise. * dwarf-index-cache.c (_initialize_index_cache): Likewise. * dwarf2read.c (_initialize_dwarf2_read): Likewise. * filesystem.c (_initialize_filesystem): Likewise. * frame.c (_initialize_frame): Likewise. * gnu-nat.c (add_task_commands): Likewise. * infcall.c (_initialize_infcall): Likewise. * infcmd.c (_initialize_infcmd): Likewise. * interps.c (_initialize_interpreter): Likewise. * language.c (_initialize_language): Likewise. * linux-fork.c (_initialize_linux_fork): Likewise. * maint-test-settings.c (_initialize_maint_test_settings): Likewise. * maint.c (_initialize_maint_cmds): Likewise. * memattr.c (_initialize_mem): Likewise. * printcmd.c (_initialize_printcmd): Likewise. * python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq, _RegEx): Likewise. * ravenscar-thread.c (_initialize_ravenscar): Likewise. * record-btrace.c (_initialize_record_btrace): Likewise. * record-full.c (_initialize_record_full): Likewise. * record.c (_initialize_record): Likewise. * regcache-dump.c (_initialize_regcache_dump): Likewise. * regcache.c (_initialize_regcache): Likewise. * remote.c (add_packet_config_cmd, init_remote_threadtests, _initialize_remote): Likewise. * ser-tcp.c (_initialize_ser_tcp): Likewise. * serial.c (_initialize_serial): Likewise. * skip.c (_initialize_step_skip): Likewise. * source.c (_initialize_source): Likewise. * stack.c (_initialize_stack): Likewise. * symfile.c (_initialize_symfile): Likewise. * symtab.c (_initialize_symtab): Likewise. * target-descriptions.c (_initialize_target_descriptions): Likewise. * top.c (init_main): Likewise. * tracefile-tfile.c (tfile_target_info): Likewise. * tracepoint.c (_initialize_tracepoint): Likewise. * tui/tui-win.c (_initialize_tui_win): Likewise. * utils.c (add_internal_problem_command): Likewise. * valprint.c (value_print_option_defs): Likewise. gdb/testsuite/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * gdb.base/style.exp: Update tests for help doc new invariants. * gdb.base/help.exp: Likewise. |
||
|
Tom Tromey
|
381befeedf |
Rename field_int to field_signed
This renames ui_out::field_int to field_signed, and field_fmt_int to field_fmt_signed; and changes the type of the "value" parameter from int to LONGEST. Tested by the buildbot. gdb/ChangeLog 2019-07-17 Tom Tromey <tromey@adacore.com> * ui-out.h (class ui_out) <field_signed, field_fmt_signed, do_field_signed>: Rename. Change type of "value". * ui-out.c (ui_out::field_signed): Rename from field_int. Change type of "value". (ui_out::field_fmt_signed): Rename from field_fmt_int. Change type of "value". * tui/tui-out.h (class tui_ui_out) <do_field_signed>: Rename from do_field_int. Change type of "value". * tui/tui-out.c (tui_ui_out::do_field_signed): Rename from do_field_int. Change type of "value". * tracepoint.c (trace_status_mi, tfind_1) (print_one_static_tracepoint_marker): Update. * thread.c (print_thread_info_1, print_selected_thread_frame): Update. * stack.c (print_frame, print_frame_info): Update. * spu-tdep.c (info_spu_signal_command, info_spu_dma_cmdlist): Update. * source.c (print_source_lines_base): Update. * skip.c (info_skip_command): Update. * record-btrace.c (btrace_ui_out_decode_error) (btrace_call_history_src_line): Update. * python/py-framefilter.c (py_print_single_arg, py_print_frame): Update. * progspace.c (print_program_space): Update. * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Update. * mi/mi-out.h (class mi_ui_out) <do_field_signed>: Rename from do_field_int. Change type of "value". * mi/mi-out.c (mi_ui_out::do_table_begin) (mi_ui_out::do_table_header): Update. (mi_ui_out::do_field_signed): Rename from do_field_int. Change type of "value". * mi/mi-main.c (mi_cmd_thread_list_ids, print_one_inferior) (mi_cmd_data_list_changed_registers, output_register) (mi_cmd_data_read_memory, mi_load_progress) (mi_cmd_trace_frame_collected): Update. * mi/mi-interp.c (mi_on_normal_stop_1, mi_output_solib_attribs): Update. * mi/mi-cmd-var.c (print_varobj, mi_cmd_var_create) (mi_cmd_var_delete, mi_cmd_var_info_num_children) (mi_cmd_var_list_children, varobj_update_one): Update. * mi/mi-cmd-stack.c (mi_cmd_stack_info_depth) (mi_cmd_stack_list_args, list_arg_or_local): Update. * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Update. * inferior.c (print_inferior): Update. * gdb_bfd.c (print_one_bfd): Update. * disasm.c (gdb_pretty_print_disassembler::pretty_print_insn): Update. * darwin-nat-info.c (darwin_debug_regions_recurse): Update. * cli-out.h (class cli_ui_out) <do_field_signed>: Rename from do_field_int. Change type of "value". * cli-out.c (cli_ui_out::do_field_signed): Rename from do_field_int. Change type of "value". * breakpoint.c (watchpoint_check, print_breakpoint_location) (print_one_breakpoint_location, print_it_catch_fork) (print_one_catch_fork, print_it_catch_vfork) (print_one_catch_vfork, print_it_catch_solib) (print_it_catch_exec, print_it_ranged_breakpoint) (print_mention_watchpoint, print_mention_masked_watchpoint) (bkpt_print_it, update_static_tracepoint): Update. * break-catch-throw.c (print_it_exception_catchpoint): Update. * break-catch-syscall.c (print_it_catch_syscall): Update. * ada-tasks.c (print_ada_task_info): Update. * ada-lang.c (print_it_exception, print_mention_exception): Update. |
||
|
Tom Tromey
|
33eca68072 |
Use field_string in more places
This replaces uses of field_fmt with a "%s" format string to use field_string instead. Also, one use of "%9lx" is replaced with a call to phex_nz; the '9' is dropped as it is implicit in the field width. 2019-07-15 Tom Tromey <tromey@adacore.com> * mi/mi-main.c (list_available_thread_groups): Use field_string. * mi/mi-interp.c (mi_memory_changed): Use field_string. * target.c (flash_erase_command): Use field_string. * infrun.c (print_signal_received_reason): Use field_string. * i386-tdep.c (i386_mpx_print_bounds): Use field_string. * breakpoint.c (maybe_print_thread_hit_breakpoint): Use field_string. * ada-tasks.c (print_ada_task_info): Use field_string. |
||
|
Tom Tromey
|
24c54127c5 |
Two minor constifications
I noticed a couple of spots where a "char *" was used where a "const char *" made more sense. This patch fixes both of them. Tested by rebuilding. gdb/ChangeLog 2019-05-10 Tom Tromey <tromey@adacore.com> * thread.c (print_thread_info): Make "requested_threads" const. * gdbthread.h (print_thread_info): Make "requested_threads" const. * ada-tasks.c (print_ada_task_info): Make "taskno_str" const. * ada-lang.h (print_ada_task_info): Make "taskno_str" const. |
||
|
Tom Tromey
|
14ef6690f1 |
Convert ada-tasks.c to type-safe registry API
This changes ada-tasks.c to use the type-safe registry API. gdb/ChangeLog 2019-05-08 Tom Tromey <tom@tromey.com> * ada-tasks.c (ada_tasks_pspace_data_handle): Change type. (get_ada_tasks_pspace_data): Update. (ada_tasks_pspace_data_cleanup): Remove. (_initialize_tasks): Update. (ada_tasks_inferior_data_handle): Change type. (get_ada_tasks_inferior_data): Update. (ada_tasks_inferior_data_cleanup): Remove. (struct ada_tasks_pspace_data): Add initializers. |
||
|
Tom Tromey
|
4de283e4b5 |
Revert the header-sorting patch
Andreas Schwab and John Baldwin pointed out some bugs in the header sorting patch; and I noticed that the output was not correct when limited to a subset of files (a bug in my script). So, I'm reverting the patch. I may try again after fixing the issues pointed out. gdb/ChangeLog 2019-04-05 Tom Tromey <tom@tromey.com> Revert the header-sorting patch. * ft32-tdep.c: Revert. * frv-tdep.c: Revert. * frv-linux-tdep.c: Revert. * frame.c: Revert. * frame-unwind.c: Revert. * frame-base.c: Revert. * fork-child.c: Revert. * findvar.c: Revert. * findcmd.c: Revert. * filesystem.c: Revert. * filename-seen-cache.h: Revert. * filename-seen-cache.c: Revert. * fbsd-tdep.c: Revert. * fbsd-nat.h: Revert. * fbsd-nat.c: Revert. * f-valprint.c: Revert. * f-typeprint.c: Revert. * f-lang.c: Revert. * extension.h: Revert. * extension.c: Revert. * extension-priv.h: Revert. * expprint.c: Revert. * exec.h: Revert. * exec.c: Revert. * exceptions.c: Revert. * event-top.c: Revert. * event-loop.c: Revert. * eval.c: Revert. * elfread.c: Revert. * dwarf2read.h: Revert. * dwarf2read.c: Revert. * dwarf2loc.c: Revert. * dwarf2expr.h: Revert. * dwarf2expr.c: Revert. * dwarf2-frame.c: Revert. * dwarf2-frame-tailcall.c: Revert. * dwarf-index-write.h: Revert. * dwarf-index-write.c: Revert. * dwarf-index-common.c: Revert. * dwarf-index-cache.h: Revert. * dwarf-index-cache.c: Revert. * dummy-frame.c: Revert. * dtrace-probe.c: Revert. * disasm.h: Revert. * disasm.c: Revert. * disasm-selftests.c: Revert. * dictionary.c: Revert. * dicos-tdep.c: Revert. * demangle.c: Revert. * dcache.h: Revert. * dcache.c: Revert. * darwin-nat.h: Revert. * darwin-nat.c: Revert. * darwin-nat-info.c: Revert. * d-valprint.c: Revert. * d-namespace.c: Revert. * d-lang.c: Revert. * ctf.c: Revert. * csky-tdep.c: Revert. * csky-linux-tdep.c: Revert. * cris-tdep.c: Revert. * cris-linux-tdep.c: Revert. * cp-valprint.c: Revert. * cp-support.c: Revert. * cp-namespace.c: Revert. * cp-abi.c: Revert. * corelow.c: Revert. * corefile.c: Revert. * continuations.c: Revert. * completer.h: Revert. * completer.c: Revert. * complaints.c: Revert. * coffread.c: Revert. * coff-pe-read.c: Revert. * cli-out.h: Revert. * cli-out.c: Revert. * charset.c: Revert. * c-varobj.c: Revert. * c-valprint.c: Revert. * c-typeprint.c: Revert. * c-lang.c: Revert. * buildsym.c: Revert. * buildsym-legacy.c: Revert. * build-id.h: Revert. * build-id.c: Revert. * btrace.c: Revert. * bsd-uthread.c: Revert. * breakpoint.h: Revert. * breakpoint.c: Revert. * break-catch-throw.c: Revert. * break-catch-syscall.c: Revert. * break-catch-sig.c: Revert. * blockframe.c: Revert. * block.c: Revert. * bfin-tdep.c: Revert. * bfin-linux-tdep.c: Revert. * bfd-target.c: Revert. * bcache.c: Revert. * ax-general.c: Revert. * ax-gdb.h: Revert. * ax-gdb.c: Revert. * avr-tdep.c: Revert. * auxv.c: Revert. * auto-load.c: Revert. * arm-wince-tdep.c: Revert. * arm-tdep.c: Revert. * arm-symbian-tdep.c: Revert. * arm-pikeos-tdep.c: Revert. * arm-obsd-tdep.c: Revert. * arm-nbsd-tdep.c: Revert. * arm-nbsd-nat.c: Revert. * arm-linux-tdep.c: Revert. * arm-linux-nat.c: Revert. * arm-fbsd-tdep.c: Revert. * arm-fbsd-nat.c: Revert. * arm-bsd-tdep.c: Revert. * arch-utils.c: Revert. * arc-tdep.c: Revert. * arc-newlib-tdep.c: Revert. * annotate.h: Revert. * annotate.c: Revert. * amd64-windows-tdep.c: Revert. * amd64-windows-nat.c: Revert. * amd64-tdep.c: Revert. * amd64-sol2-tdep.c: Revert. * amd64-obsd-tdep.c: Revert. * amd64-obsd-nat.c: Revert. * amd64-nbsd-tdep.c: Revert. * amd64-nbsd-nat.c: Revert. * amd64-nat.c: Revert. * amd64-linux-tdep.c: Revert. * amd64-linux-nat.c: Revert. * amd64-fbsd-tdep.c: Revert. * amd64-fbsd-nat.c: Revert. * amd64-dicos-tdep.c: Revert. * amd64-darwin-tdep.c: Revert. * amd64-bsd-nat.c: Revert. * alpha-tdep.c: Revert. * alpha-obsd-tdep.c: Revert. * alpha-nbsd-tdep.c: Revert. * alpha-mdebug-tdep.c: Revert. * alpha-linux-tdep.c: Revert. * alpha-linux-nat.c: Revert. * alpha-bsd-tdep.c: Revert. * alpha-bsd-nat.c: Revert. * aix-thread.c: Revert. * agent.c: Revert. * addrmap.c: Revert. * ada-varobj.c: Revert. * ada-valprint.c: Revert. * ada-typeprint.c: Revert. * ada-tasks.c: Revert. * ada-lang.c: Revert. * aarch64-tdep.c: Revert. * aarch64-ravenscar-thread.c: Revert. * aarch64-newlib-tdep.c: Revert. * aarch64-linux-tdep.c: Revert. * aarch64-linux-nat.c: Revert. * aarch64-fbsd-tdep.c: Revert. * aarch64-fbsd-nat.c: Revert. * aarch32-linux-nat.c: Revert. |
||
|
Tom Tromey
|
d55e5aa6b2 |
Sort includes for files gdb/[a-f]*.[chyl].
This patch sorts the include files for the files [a-f]*.[chyl]. The patch was written by a script. Tested by the buildbot. I will follow up with patches to sort the remaining files, by sorting a subset, testing them, and then checking them in. gdb/ChangeLog 2019-04-05 Tom Tromey <tom@tromey.com> * ft32-tdep.c: Sort headers. * frv-tdep.c: Sort headers. * frv-linux-tdep.c: Sort headers. * frame.c: Sort headers. * frame-unwind.c: Sort headers. * frame-base.c: Sort headers. * fork-child.c: Sort headers. * findvar.c: Sort headers. * findcmd.c: Sort headers. * filesystem.c: Sort headers. * filename-seen-cache.h: Sort headers. * filename-seen-cache.c: Sort headers. * fbsd-tdep.c: Sort headers. * fbsd-nat.h: Sort headers. * fbsd-nat.c: Sort headers. * f-valprint.c: Sort headers. * f-typeprint.c: Sort headers. * f-lang.c: Sort headers. * extension.h: Sort headers. * extension.c: Sort headers. * extension-priv.h: Sort headers. * expprint.c: Sort headers. * exec.h: Sort headers. * exec.c: Sort headers. * exceptions.c: Sort headers. * event-top.c: Sort headers. * event-loop.c: Sort headers. * eval.c: Sort headers. * elfread.c: Sort headers. * dwarf2read.h: Sort headers. * dwarf2read.c: Sort headers. * dwarf2loc.c: Sort headers. * dwarf2expr.h: Sort headers. * dwarf2expr.c: Sort headers. * dwarf2-frame.c: Sort headers. * dwarf2-frame-tailcall.c: Sort headers. * dwarf-index-write.h: Sort headers. * dwarf-index-write.c: Sort headers. * dwarf-index-common.c: Sort headers. * dwarf-index-cache.h: Sort headers. * dwarf-index-cache.c: Sort headers. * dummy-frame.c: Sort headers. * dtrace-probe.c: Sort headers. * disasm.h: Sort headers. * disasm.c: Sort headers. * disasm-selftests.c: Sort headers. * dictionary.c: Sort headers. * dicos-tdep.c: Sort headers. * demangle.c: Sort headers. * dcache.h: Sort headers. * dcache.c: Sort headers. * darwin-nat.h: Sort headers. * darwin-nat.c: Sort headers. * darwin-nat-info.c: Sort headers. * d-valprint.c: Sort headers. * d-namespace.c: Sort headers. * d-lang.c: Sort headers. * ctf.c: Sort headers. * csky-tdep.c: Sort headers. * csky-linux-tdep.c: Sort headers. * cris-tdep.c: Sort headers. * cris-linux-tdep.c: Sort headers. * cp-valprint.c: Sort headers. * cp-support.c: Sort headers. * cp-namespace.c: Sort headers. * cp-abi.c: Sort headers. * corelow.c: Sort headers. * corefile.c: Sort headers. * continuations.c: Sort headers. * completer.h: Sort headers. * completer.c: Sort headers. * complaints.c: Sort headers. * coffread.c: Sort headers. * coff-pe-read.c: Sort headers. * cli-out.h: Sort headers. * cli-out.c: Sort headers. * charset.c: Sort headers. * c-varobj.c: Sort headers. * c-valprint.c: Sort headers. * c-typeprint.c: Sort headers. * c-lang.c: Sort headers. * buildsym.c: Sort headers. * buildsym-legacy.c: Sort headers. * build-id.h: Sort headers. * build-id.c: Sort headers. * btrace.c: Sort headers. * bsd-uthread.c: Sort headers. * breakpoint.h: Sort headers. * breakpoint.c: Sort headers. * break-catch-throw.c: Sort headers. * break-catch-syscall.c: Sort headers. * break-catch-sig.c: Sort headers. * blockframe.c: Sort headers. * block.c: Sort headers. * bfin-tdep.c: Sort headers. * bfin-linux-tdep.c: Sort headers. * bfd-target.c: Sort headers. * bcache.c: Sort headers. * ax-general.c: Sort headers. * ax-gdb.h: Sort headers. * ax-gdb.c: Sort headers. * avr-tdep.c: Sort headers. * auxv.c: Sort headers. * auto-load.c: Sort headers. * arm-wince-tdep.c: Sort headers. * arm-tdep.c: Sort headers. * arm-symbian-tdep.c: Sort headers. * arm-pikeos-tdep.c: Sort headers. * arm-obsd-tdep.c: Sort headers. * arm-nbsd-tdep.c: Sort headers. * arm-nbsd-nat.c: Sort headers. * arm-linux-tdep.c: Sort headers. * arm-linux-nat.c: Sort headers. * arm-fbsd-tdep.c: Sort headers. * arm-fbsd-nat.c: Sort headers. * arm-bsd-tdep.c: Sort headers. * arch-utils.c: Sort headers. * arc-tdep.c: Sort headers. * arc-newlib-tdep.c: Sort headers. * annotate.h: Sort headers. * annotate.c: Sort headers. * amd64-windows-tdep.c: Sort headers. * amd64-windows-nat.c: Sort headers. * amd64-tdep.c: Sort headers. * amd64-sol2-tdep.c: Sort headers. * amd64-obsd-tdep.c: Sort headers. * amd64-obsd-nat.c: Sort headers. * amd64-nbsd-tdep.c: Sort headers. * amd64-nbsd-nat.c: Sort headers. * amd64-nat.c: Sort headers. * amd64-linux-tdep.c: Sort headers. * amd64-linux-nat.c: Sort headers. * amd64-fbsd-tdep.c: Sort headers. * amd64-fbsd-nat.c: Sort headers. * amd64-dicos-tdep.c: Sort headers. * amd64-darwin-tdep.c: Sort headers. * amd64-bsd-nat.c: Sort headers. * alpha-tdep.c: Sort headers. * alpha-obsd-tdep.c: Sort headers. * alpha-nbsd-tdep.c: Sort headers. * alpha-mdebug-tdep.c: Sort headers. * alpha-linux-tdep.c: Sort headers. * alpha-linux-nat.c: Sort headers. * alpha-bsd-tdep.c: Sort headers. * alpha-bsd-nat.c: Sort headers. * aix-thread.c: Sort headers. * agent.c: Sort headers. * addrmap.c: Sort headers. * ada-varobj.c: Sort headers. * ada-valprint.c: Sort headers. * ada-typeprint.c: Sort headers. * ada-tasks.c: Sort headers. * ada-lang.c: Sort headers. * aarch64-tdep.c: Sort headers. * aarch64-ravenscar-thread.c: Sort headers. * aarch64-newlib-tdep.c: Sort headers. * aarch64-linux-tdep.c: Sort headers. * aarch64-linux-nat.c: Sort headers. * aarch64-fbsd-tdep.c: Sort headers. * aarch64-fbsd-nat.c: Sort headers. * aarch32-linux-nat.c: Sort headers. |
||
|
Tom Tromey
|
98814c6c11 |
Minor Ada task cleanups
While working on the Ada task code, I noticed a few things that could be cleaned up: * task_list_valid_p was not set in all cases in ada_build_task_list. This causes many needless re-fetches of the task list. * task_list_valid_p can be bool, and various functions can also return bool. * Nothing checks the return value of read_known_tasks, so it can be changed to return void. * The call to ada_build_task_list in ravenscar_thread_target::update_thread_list is redundant, because this is the first thing done by iterate_over_live_ada_tasks. Tested using the internal AdaCore test suite against a ravenscar target. gdb/ChangeLog 2019-02-19 Tom Tromey <tromey@adacore.com> * ravenscar-thread.c (ravenscar_thread_target::update_thread_list): Don't call ada_build_task_list. * ada-lang.h (ada_build_task_list): Don't declare. * ada-tasks.c (struct ada_tasks_inferior_data) <task_list_valid_p>: Now bool. (read_known_tasks, ada_task_list_changed) (ada_tasks_invalidate_inferior_data): Update. (read_known_tasks_array): Return bool. (read_known_tasks_list): Likewise. (read_known_tasks): Return void. (ada_build_task_list): Now static. |
||
|
Philippe Waroquiers
|
040b3e95e4 |
Fix leaks of 'per program space' and 'per inferior' ada task data.
Valgrind reports leaks such as the below. Fix these leaks by changing ada_tasks_pspace_data_handle and ada_tasks_inferior_data_handle to use the 'with_cleanup' register variant. Tested on debian/amd64 natively and under Valgrind. ==26346== 56 bytes in 1 blocks are definitely lost in loss record 631 of 3,249 ==26346== at 0x4C2C4CC: operator new(unsigned long) (vg_replace_malloc.c:344) ==26346== by 0x38F911: get_ada_tasks_inferior_data(inferior*) (ada-tasks.c:281) ==26346== by 0x38FA3F: ada_tasks_invalidate_inferior_data (ada-tasks.c:1362) ==26346== by 0x38FA3F: ada_tasks_new_objfile_observer(objfile*) (ada-tasks.c:1411) ==26346== by 0x60CBC5: operator() (functional:2127) ==26346== by 0x60CBC5: notify (observable.h:106) ==26346== by 0x60CBC5: clear_symtab_users(enum_flags<symfile_add_flag>) (symfile.c:2903) ... ==26346== 104 bytes in 1 blocks are definitely lost in loss record 984 of 3,249 ==26346== at 0x4C2E0BC: calloc (vg_replace_malloc.c:762) ==26346== by 0x4056F0: xcalloc (common-utils.c:84) ==26346== by 0x38F8AE: xcnew<ada_tasks_pspace_data> (poison.h:122) ==26346== by 0x38F8AE: get_ada_tasks_pspace_data(program_space*) (ada-tasks.c:253) ==26346== by 0x38FA77: ada_tasks_invalidate_pspace_data (ada-tasks.c:1354) ==26346== by 0x38FA77: ada_tasks_new_objfile_observer(objfile*) (ada-tasks.c:1394) ==26346== by 0x60CBC5: operator() (functional:2127) ==26346== by 0x60CBC5: notify (observable.h:106) ... gdb/ChangeLog 2019-02-18 Philippe Waroquiers <philippe.waroquiers@skynet.be> * ada-task.c (_initialize_tasks): Use 'with_cleanup' register variant for ada_tasks_pspace_data_handle and ada_tasks_inferior_data_handle. (ada_tasks_pspace_data_cleanup): New function. (ada_tasks_inferior_data_cleanup): New function. |
||
|
Joel Brobecker
|
42a4f53d2b |
Update copyright year range in all GDB files.
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files. |
||
|
Joel Brobecker
|
76136aeda5 |
(Ada/tasking) fix array or string index out of range warning
A recent change in the compiler highlighted a small weakness in
the function reading the contents of the Ada Task Control Block
(ATCB -- the data that allows us to inspect Ada tasks). As a result,
anytime we read it, we started getting some warnings. For instance,
using the gdb.ada/tasks.exp testcase...
$ gnatmake -g foo.adb
$ gdb foo
(gdb) b foo.adb:60
Breakpoint 1 at 0x403e07: file foo.adb, line 60.
(gdb) run
[...]
Thread 1 "foo" hit Breakpoint 1, foo () at foo.adb:60
60 for J in Task_List'Range loop -- STOP_HERE
... we can see that the "info tasks" command produces some warnings,
followed by the correct output.
(gdb) info tasks
!! -> warning: array or string index out of range
!! -> warning: array or string index out of range
!! -> warning: array or string index out of range
!! -> warning: array or string index out of range
ID TID P-ID Pri State Name
* 1 654050 48 Runnable main_task
2 654ef0 1 48 Accept or Select Term task_list(1)
3 658680 1 48 Accept or Select Term task_list(2)
4 65be10 1 48 Accept or Select Term task_list(3)
The problem comes from the fact that read_atcb, the function responsible
for loading the contents of the ATCB, blindly tries to read some data
which is only relevant when a task is waiting for another task on
an entry call. A comment in that code's section gives a hint as to
how the information is meant to be decoded:
/* Let My_ATCB be the Ada task control block of a task calling the
entry of another task; then the Task_Id of the called task is
in My_ATCB.Entry_Calls (My_ATCB.ATC_Nesting_Level).Called_Task. */
What the comment shows is that, to get the Id of the task being called,
one has to go through the entry calls field, which is an array pointer.
Up to now, we were lucky that, for tasks that are _not_ waiting on an
entry call, its ATCB atc_nesting_level used to be set to 1, and so
we were able to silently read some irrelevant data. But a recent change
now causes this field to be zero instead, and this triggers the warning,
since we are now trying to read outside of the array's range (arrays
in Ada often start at index 1, as is the case here).
We avoid this issue by simply only reading that data when the data
is actually known to be relevant (state == Entry_Caller_Sleep).
This, in turn, allows us to simplify a bit the use of the task_info->state
field, where we no longer need to check task the task has a state equal
to Entry_Caller_Sleep before using this field. Indeed, with this new
approach, we now know that, unless task_info->state == Entry_Caller_Sleep,
the state is now guaranteed to be zero. In other words, we no longer set
task_info->called_task to some random value, forcing to check the task's
state first as a way to verify that the data is not random.
gdb/ChangeLog:
* ada-lang.c (read_atcb): Only set task_info->called_task if
task_info->state == Entry_Caller_Sleep.
(print_ada_task_info): Do not check task_info->state before
checking task_info->called_task.
(info_task): Likewise.
|
||
|
Joel Brobecker
|
07deea26b5 |
ada-tasks.c::read_atcb: start from a cleared ada_task_info result
The purpose of this patch is not to fix a bug per se, but rather
to robustify this function to make sure it never returns a struct
ada_task_info where some of the fields are left uninitialized.
Reading the current implementation, it attempts to methodically
set them all one by one: but it's not excluded that a future
change might miss something. A memset is cheap and make sure that
this function returns repeatable results.
This in turns allows us to remove some assignments which have become
redundant.
gdb/ChangeLog:
* ada-tasks.c (read_atcb): Clear task_info before computing
the value of each of its fields.
|
||
|
Simon Marchi
|
c645cda49e |
Make ada_tasks_inferior_data::task_list an std::vector
This removes a VEC type. It requires converting ada_tasks_inferior_data to C++ (initializing fields, allocating with new). It seems, however, that the allocated ada_tasks_inferior_data structures are never freed (that should be fixed separately). gdb/ChangeLog: * ada-tasks.c (ada_task_info_s): Remove typedef. (DEF_VEC_O(ada_task_info_s)): Remove. (struct ada_tasks_inferior_data): Initialize fields. <task_list>: Make an std::vector. (get_ada_tasks_inferior_data): Allocate with new. (ada_get_task_number): Adjust. (get_task_number_from_id): Likewise. (valid_task_id): Likewise. (ada_get_task_info_from_ptid): Likewise. (iterate_over_live_ada_tasks): Likewise. (add_ada_task): Likewise. (read_known_tasks): Likewise. (ada_build_task_list): Likewise. (print_ada_task_info): Likewise. (info_task): Likewise. (task_command_1): Likewise. |
||
|
Tom Tromey
|
d7e15655a4 |
Remove ptid_equal
Remove ptid_equal in favor of using "==". gdb/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * common/ptid.c (ptid_equal): Remove. * common/ptid.h (ptid_equal): Don't declare. * ada-tasks.c: Update. * breakpoint.c: Update. * common/agent.c: Update. * corelow.c: Update. * darwin-nat-info.c: Update. * darwin-nat.c: Update. * dcache.c: Update. * dtrace-probe.c: Update. * dummy-frame.c: Update. * fbsd-nat.c: Update. * frame.c: Update. * gdbthread.h: Update. * gnu-nat.c: Update. * go32-nat.c: Update. * inf-loop.c: Update. * inf-ptrace.c: Update. * infcall.c: Update. * infcmd.c: Update. * inflow.c: Update. * infrun.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-thread-db.c: Update. * mi/mi-cmd-var.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * nto-procfs.c: Update. * ppc-linux-tdep.c: Update. * procfs.c: Update. * python/py-inferior.c: Update. * python/py-record-btrace.c: Update. * python/py-record.c: Update. * ravenscar-thread.c: Update. * regcache.c: Update. * remote-sim.c: Update. * remote.c: Update. * sol-thread.c: Update. * solib.c: Update. * target.c: Update. * tui/tui-stack.c: Update. * varobj.c: Update. * windows-nat.c: Update. * windows-tdep.c: Update. gdb/gdbserver/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * linux-low.c: Update. * lynx-low.c: Update. * mem-break.c: Update. * nto-low.c: Update. * remote-utils.c: Update. * server.c: Update. * spu-low.c: Update. * target.c: Update. * win32-low.c: Update. |
||
|
Tom Tromey
|
cc6bcb548d |
Remove ptid_get_tid
This removes ptid_get_tid in favor of calling the ptid_t::tid method. gdb/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * common/ptid.c (ptid_get_tid): Remove. * common/ptid.h (ptid_get_tid): Don't declare. * ada-tasks.c: Update. * aix-thread.c: Update. * bsd-uthread.c: Update. * darwin-nat.c: Update. * fbsd-nat.c: Update. * i386-darwin-nat.c: Update. * infrun.c: Update. * linux-tdep.c: Update. * nto-procfs.c: Update. * ppc-ravenscar-thread.c: Update. * python/py-infthread.c: Update. * ravenscar-thread.c: Update. * sol-thread.c: Update. * sparc-ravenscar-thread.c: Update. * windows-nat.c: Update. gdb/gdbserver/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * target.c: Update. |
||
|
Tom Tromey
|
e38504b392 |
Remove ptid_get_lwp
This removes ptid_get_lwp in favor of calling the ptid_t::lwp method. gdb/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * common/ptid.c (ptid_get_lwp): Remove. * common/ptid.h (ptid_get_lwp): Don't declare. * aarch64-linux-nat.c: Update. * ada-tasks.c: Update. * aix-thread.c: Update. * amd64-linux-nat.c: Update. * arm-linux-nat.c: Update. * corelow.c: Update. * fbsd-nat.c: Update. * fbsd-tdep.c: Update. * gnu-nat.c: Update. * i386-cygwin-tdep.c: Update. * i386-gnu-nat.c: Update. * i386-linux-nat.c: Update. * ia64-linux-nat.c: Update. * inf-ptrace.c: Update. * infrun.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * mips-linux-nat.c: Update. * nat/aarch64-linux-hw-point.c: Update. * nat/aarch64-linux.c: Update. * nat/linux-btrace.c: Update. * nat/linux-osdata.c: Update. * nat/linux-procfs.c: Update. * nat/x86-linux-dregs.c: Update. * obsd-nat.c: Update. * ppc-fbsd-nat.c: Update. * ppc-linux-nat.c: Update. * procfs.c: Update. * python/py-infthread.c: Update. * ravenscar-thread.c: Update. * remote.c: Update. * s390-linux-nat.c: Update. * sol-thread.c: Update. * sol2-tdep.c: Update. * spu-linux-nat.c: Update. * x86-linux-nat.c: Update. * xtensa-linux-nat.c: Update. gdb/gdbserver/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * linux-low.c: Update. * linux-mips-low.c: Update. * lynx-low.c: Update. * nto-low.c: Update. * remote-utils.c: Update. * server.c: Update. * spu-low.c: Update. * target.c: Update. * thread-db.c: Update. |
||
|
Pedro Alves
|
00431a78b2 |
Use thread_info and inferior pointers more throughout
This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid. |
||
|
Tom Tromey
|
76727919ce |
Convert observers to C++
This converts observers from using a special source-generating script to be plain C++. This version of the patch takes advantage of C++11 by using std::function and variadic templates; incorporates Pedro's patches; and renames the header file to "observable.h" (this change eliminates the need for a clean rebuild). Note that Pedro's patches used a template lambda in tui-hooks.c, but this failed to compile on some buildbot instances (presumably due to differing C++ versions); I replaced this with an ordinary template function. Regression tested on the buildbot. gdb/ChangeLog 2018-03-19 Pedro Alves <palves@redhat.com> Tom Tromey <tom@tromey.com> * unittests/observable-selftests.c: New file. * common/observable.h: New file. * observable.h: New file. * ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c, arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c, breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c, corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c, extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c, infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c, linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c, mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c, ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c, python/py-breakpoint.c, python/py-finishbreakpoint.c, python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c, record-btrace.c, record-full.c, record.c, regcache.c, remote.c, riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c, spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c, symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c, tui/tui-interp.c, valops.c: Update all users. * tui/tui-hooks.c (tui_bp_created_observer) (tui_bp_deleted_observer, tui_bp_modified_observer) (tui_inferior_exit_observer, tui_before_prompt_observer) (tui_normal_stop_observer, tui_register_changed_observer): Remove. (tui_observers_token): New global. (attach_or_detach, tui_attach_detach_observers): New functions. (tui_install_hooks, tui_remove_hooks): Use tui_attach_detach_observers. * record-btrace.c (record_btrace_thread_observer): Remove. (record_btrace_thread_observer_token): New global. * observer.sh: Remove. * observer.c: Rename to observable.c. * observable.c (namespace gdb_observers): Define new objects. (observer_debug): Move into gdb_observers namespace. (struct observer, struct observer_list, xalloc_observer_list_node) (xfree_observer_list_node, generic_observer_attach) (generic_observer_detach, generic_observer_notify): Remove. (_initialize_observer): Update. Don't include observer.inc. * Makefile.in (generated_files): Remove observer.h, observer.inc. (clean mostlyclean): Likewise. (observer.h, observer.inc): Remove targets. (SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c. (COMMON_SFILES): Use observable.c, not observer.c. * .gitignore: Remove observer.h. gdb/doc/ChangeLog 2018-03-19 Tom Tromey <tom@tromey.com> * observer.texi: Remove. gdb/testsuite/ChangeLog 2018-03-19 Tom Tromey <tom@tromey.com> * gdb.gdb/observer.exp: Remove. |
||
|
Joel Brobecker
|
e2882c8578 |
Update copyright year range in all GDB files
gdb/ChangeLog:
Update copyright year range in all GDB files
|
||
|
Joel Brobecker
|
e05fa6f9df |
(Ada) Add support for task switching when debugging core files
The reasons for not supporting task switching when debugging core files
appear to now mostly be OBE. In particular, on GNU/Linux, the thread
layer is now able to retrieve the same thread info as in the live
process. So, this patch is mostly about just removing the guard
that limited the use of task switching to live processes.
gdb/ChangeLog:
* ada-tasks.c (read_atcb): Properly set task_info->ptid
when !target_has_execution as well.
(task_command): Remove error when !target_has_execution.
gdb/testsuite/ChangeLog:
* gdb.ada/task_switch_in_core: New testcase.
|
||
|
Joel Brobecker
|
cf3fbed4a0 |
problem debugging ravenscar programs if runtime is stripped
Trying to debug a program using a stripped version of the ravenscar
runtime, we can get the following error:
(gdb) cont
Continuing.
Cannot find Ada_Task_Control_Block type. Aborting
This is because the ravenscar-thread layer makes the assumption that
the runtime is built the way we expect it, meaning that the Ada tasking
units we rely on for Ada tasking debugging, are built with debugging
information, and that this debug information has not been stripped from
the runtime.
When this assumption is not true, resuming such a program can trigger
the error above, which then leads GDB a little confused. For instance,
we can see things like:
(gdb) bt
Target is executing.
This patch fixes the issue by disabling the ravenscar thread layer
if we detect that the runtime is missing some of the debugging info
we need in order to support Ada task debugging. This is the best
we can do, as the ravenscar-thread layer actually depends on the
ada-tasks layer to implement thread debugging.
gdb/ChangeLog:
* ada-lang.h (ada_get_tcb_types_info): Add declaration.
* ada-tasks.c (ada_get_tcb_types_info): Renames get_tcb_types_info.
Make non-static. Change return type to char *. Adjust code
accordingly. Rewrite the function's documentation.
(read_atcb): Adjust call to get_tcb_types_info accordingly.
* ravenscar-thread.c (ravenscar_inferior_created): Check that
we have enough debugging information in the runtime to support
Ada task debugging before we enable the ravenscar-thread layer.
|
||
|
Joel Brobecker
|
9edcc12f9b |
Add multiple-CPU support in ravenscar-thread.c
This patch reworks the ravenscar-thread layer to remove the
assumption that the target only has 1 CPU. In particular,
when connected to a QEMU target over the remote protocol,
QEMU reports each CPU as one thread. This patch adapts
the ravenscar-thread layer to this, and adds a large comment
explaining the general design of this unit.
gdb/ChangeLog:
* ada-lang.h (ada_get_task_info_from_ptid): Add declaration.
* ada-tasks.c (ada_get_task_info_from_ptid): New function.
* ravenscar-thread.c: Add into comment.
(base_magic_null_ptid): Delete.
(base_ptid): Change documentation.
(ravenscar_active_task): Renames ravenscar_running_thread.
All callers updated throughout.
(is_ravenscar_task, ravenscar_get_thread_base_cpu): New function.
(ravenscar_task_is_currently_active): Likewise.
(get_base_thread_from_ravenscar_task): Ditto.
(ravenscar_update_inferior_ptid): Adjust to handle multiple CPUs.
(ravenscar_runtime_initialized): Likewise.
(get_running_thread_id): Add new parameter "cpu". Adjust
implementation to handle this new parameter.
(ravenscar_fetch_registers): Small adjustment to use
is_ravenscar_task and ravenscar_task_is_currently_active in
order to decide whether to use the target beneath or this
module's arch_ops.
(ravenscar_store_registers, ravenscar_prepare_to_store): Likewise.
(ravenscar_stopped_by_sw_breakpoint): Use
get_base_thread_from_ravenscar_task to get the underlying
thread, rather than using base_ptid.
(ravenscar_stopped_by_hw_breakpoint, ravenscar_stopped_by_watchpoint)
(ravenscar_stopped_data_address, ravenscar_core_of_thread):
Likewise.
(ravenscar_inferior_created): Do not set base_magic_null_ptid.
|
||
|
Joel Brobecker
|
65d40437e2 |
Provide the "Base CPU" in output of "info task" (if set by runtime).
At the user level, this patch enhances the debugger to print the ID
of the base CPU a task is running on:
(gdb) info task 3
Ada Task: 0x13268
Name: raven1
Thread: 0x13280
LWP: 0
!!!-> Base CPU: 1
No parent
Base Priority: 127
State: Runnable
This new field is only printed when the base CPU is nonzero or, in
other words, if the base CPU info is being provided by the runtime.
For instance, on native systems, where threads/processes can "jump"
from CPU to CPU, the info is not available, and the output of the
command above then remains unchanged.
At the internal level, the real purpose of this change is to prepare
the way for ravenscar-thread to start handling SMP systems. For that,
we'll need to know which CPU each task is running on... More info
on that in the commit that actually adds support for it.
gdb/ChangeLog:
* ada-lang.h (struct ada_task_info) <base_cpu>: New field.
* ada-lang.c (struct atcb_fieldno) <base_cpu>: New field.
(get_tcb_types_info): Set fieldnos.base_cpu.
(read_atcb): Set task_info->base_cpu.
(info_task): Print "Base CPU" info if set by runtime.
|
||
|
Tom Tromey
|
1d12d88f18 |
Constify add_info
This patch constifies add_info and updates all the info commands. The bulk of this patch was written using a script; and then I did a manual pass to fix up the remaining compilation errors. I could not compile every changed file; in particular nto-procfs.c, gnu-nat.c, and darwin-nat-info.c; but I at least tried to check the correctness by inspection. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * frame.h (info_locals_command, info_args_command): Constify. * auto-load.h (auto_load_info_scripts): Constify. * inferior.h (registers_info): Constify. * copying.c: Rebuild. * copying.awk: Constify generated commands. * auto-load.c (auto_load_info_scripts) (info_auto_load_gdb_scripts): Constify. * cli/cli-decode.c (struct cmd_list_element): Take a cmd_const_cfunc_ftype. * command.h (add_info): Take a cmd_const_cfunc_ftype. * tui/tui-win.c (tui_all_windows_info): Constify. * python/py-auto-load.c (info_auto_load_python_scripts): Constify. * cli/cli-cmds.c (show_command): Remove non-const overload. * tracepoint.c (info_tvariables_command, info_scope_command): Constify. (info_static_tracepoint_markers_command): Constify. * thread.c (info_threads_command): Constify. (print_thread_info_1): Constify. * target.c (info_target_command): Constify. * symtab.c (info_sources_command, info_functions_command) (info_types_command): Constify. (info_variables_command): Remove non-const overload. * symfile.c (info_ext_lang_command): Constify. * stack.c (info_frame_command, info_locals_command) (info_args_command): Constify. (backtrace_command): Remove non-const overload. * source.c (info_source_command, info_line_command): Constify. * solib.c (info_sharedlibrary_command): Constify. * skip.c (info_skip_command): Constify. * ser-go32.c (info_serial_command): Constify. * reverse.c (info_bookmarks_command): Constify. * printcmd.c (info_symbol_command, info_address_command) (info_display_command): Constify. * osdata.c (info_osdata_command): Constify. * objc-lang.c (info_selectors_command, info_classes_command): Constify. * nto-procfs.c (procfs_pidlist, procfs_meminfo): Constify. * memattr.c (info_mem_command): Constify. * macrocmd.c (info_macro_command, info_macros_command): Constify. * linux-fork.c (info_checkpoints_command): Constify. * infrun.c (info_signals_command): Constify. * inflow.c (info_terminal_command): Constify. * inferior.c (info_inferiors_command): Constify. (print_inferior): Constify. * infcmd.c (info_program_command, info_all_registers_command) (info_registers_command, info_vector_command) (info_float_command): Constify. (registers_info): Constify. * gnu-nat.c (info_send_rights_cmd, info_recv_rights_cmd) (info_port_sets_cmd, info_dead_names_cmd, info_port_rights_cmd): Constify. * f-valprint.c (info_common_command): Constify. * dcache.c (info_dcache_command): Constify. (dcache_info_1): Constify. * darwin-nat-info.c (info_mach_tasks_command) (info_mach_task_command, info_mach_ports_command) (info_mach_port_command, info_mach_threads_command) (info_mach_thread_command, info_mach_regions_command) (info_mach_regions_recurse_command, info_mach_region_command) (info_mach_exceptions_command): Constify. (get_task_from_args): Constify. * cp-support.c (info_vtbl_command): Constify. * breakpoint.c (info_watchpoints_command) (info_tracepoints_command): Constify. (info_breakpoints_command): Remove non-const overload. * avr-tdep.c (avr_io_reg_read_command): Constify. * auxv.c (info_auxv_command): Constify. * ada-tasks.c (info_tasks_command): Constify. (info_task): Constify. * ada-lang.c (info_exceptions_command): Constify. |