binutils/
2017-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* testsuite/binutils-all/dw5.S: New file.
* testsuite/binutils-all/dw5.W: New file.
* testsuite/binutils-all/readelf.exp (readelf -wiaoRlL): New test.
binutils* resbin.c: Optional dialog control data immediately follow
the control description without alignment.
* testsuite/binutils-all/windres/controldata.rc: New test.
source.
* testsuite/binutils-all/windres/controldata.rsd: New test.
PR binutils/20876
bfd * opncls.c (find_separate_debug_file): Add include_dirs
parameter. Only include the directory part of the bfd's filename
in search paths if include_dirs is true. Add a couple of extra
locations for looking for debug files.
( bfd_follow_gnu_debuglink): Update invocation of
find_separate_debug_file.
(bfd_follow_gnu_debugaltlink): Likewise.
(get_build_id): New function: Finds the build-id of the given bfd.
(get_build_id_name): New function: Computes the name of the
separate debug info file for a bfd, based upon its build-id.
(check_build_id_file): New function: Checks to see if a separate
debug info file exists at the given location, and that its
build-id matches that of the original bfd.
(bfd_follow_build_id_debuglink): New function: Finds a separate
debug info file for a given bfd by using the build-id method.
* dwarf2.c (_bfd_dwarf2_slurp_debug_info): Try using the build-id
method of locating a separate debug info file before using the
debuglink method.
* bfd-in2.h: Regenerate.
binutils * NEWS: Mention the new feature.
* testsuite/binutils-all/objdump.exp (test_build_id_debuglink):
New proc to test the location of separate debug info files using
the build-id method.
Add ASMACRO instruction support as per the MIPS16e ASE architecture
specifications [1][2], completing MIPS16e instruction set support.
[1] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Section 4.1 "MIPS16e Instruction Descriptions", p. 65
[2] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Section 1.1 "MIPS16e Instruction Descriptions", p. 66
include/
* opcode/mips.h: Document `0', `1', `2', `3', `4' and `s'
operand codes.
opcodes/
* mips16-opc.c (decode_mips16_operand): Add `0', `1', `2', `3',
`4' and `s' operand codes.
(mips16_opcodes): Add "asmacro" entry.
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: Update for
ASMACRO support.
gas/
* testsuite/gas/mips/mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-32@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-64@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-asmacro.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Identify non-extensible instructions in the MIPS16 opcode table and
disallow their use with the `.e' instruction size suffix in assembly and
do not interpret any EXTEND prefix present as a part of the instruction
in disassembly.
According to all versions of the MIPS16 ASE specifications the following
instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R,
I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA
and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e
ASE specifications it has been further clarified what was previously
implied, that non-extesiable instructions when preceded with an EXTEND
prefix must cause a Reserved Instruction exception [3][5].
Therefore in the presence of an EXTEND prefix none of these instructions
are supposed to be handled as extended instructions and supporting these
forms in disassembly causes confusion, and in the case of the RRR major
opcode it also clashes with the ASMACRO encoding.
References:
[1] "Product Description, MIPS16 Application-Specific Extension",
Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16
Instruction Set Summary", p. 5
[2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10
[3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39
[4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49
[5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41
[6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51
include/
* opcode/mips.h (INSN2_SHORT_ONLY): New macro.
gas/
* config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix
instruction size override for INSN2_SHORT_ONLY opcode table
entries.
* testsuite/gas/mips/mips16-extend-swap.d: Adjust output.
* testsuite/gas/mips/mips16-macro-e.l: Adjust error messages.
* testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-insn-e.l: New stderr output.
* testsuite/gas/mips/mips16-insn-t.l: New stderr output.
* testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-insn-e.s: New test source.
* testsuite/gas/mips/mips16-insn-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
opcodes/
* mips-dis.c (print_insn_mips16): Disallow EXTEND prefix
matching for INSN2_SHORT_ONLY opcode table entries.
* mips16-opc.c (SH): New macro.
(mips16_opcodes): Set SH in `pinfo2' for non-extensible
instruction entries: "nop", "addu", "and", "break", "cmp",
"daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu",
"drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv",
"dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j",
"jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg",
"not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu",
"srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb",
"seh", "sew", "zeb", "zeh", "zew" and "extend".
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: New test.
* testsuite/binutils-all/mips/mips16-extend-insn.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
Limit MIPS16 instruction disassembly according to the ISA level and ASE
set selected, as with the regular MIPS and microMIPS instruction sets.
Retain the property of `objdump -m mips:16' disassembling all MIPS16
instructions however, regardless of any ISA level recorded in the binary
examined.
To validate the disassembler use the GAS test suite for its convenience
of running tests across multiple ISAs, even though placing the tests in
the binutils test suite would be more appropriate. Adjust the single
binutils test which depends on 64-bit instruction disassembly to have
the ISA level required actually recorded in the binary examined.
opcodes/
* mips-dis.c (mips_arch_choices): Use ISA_MIPS64 rather than
ISA_MIPS3 as the `isa' selection in the `bfd_mach_mips16' entry.
(print_insn_mips16): Check opcode entries for validity against
the ISA level and ASE set selected.
binutils/
* testsuite/binutils-all/mips/mips16-undecoded.s: Use `.module'
rather than `.set' to set the ISA level.
gas/
* testsuite/gas/mips/mips16-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16e-sub.d: New test.
* testsuite/gas/mips/mips16-64@mips16e-sub.d: New test.
* testsuite/gas/mips/mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-64@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16e-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-sub.s: New test source.
* testsuite/gas/mips/mips16e-sub.s: New test source.
* testsuite/gas/mips/mips16e-64-sub.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Switch to 32-bit MIPS16 opcode table entry interpretation, similar to
how the microMIPS opcode table is handled, for both the `match' and
`mask' fields, removing special casing for JAL and JALX instructions and
their `a' and `i' operand codes throughout, while retaining automatic
processing of extendable opcodes in assembly and disassembly.
In assembly disallow size enforcement suffixes as appropriate: `.t' for
both 32-bit instructions and macros and `.e' for macros only, making
macro handling consistent with the microMIPS instruction set.
In disassembly fully decode EXTEND prefixes prepended to unsupported
instruction encodings (according to the ISA selection) rather than
dumping them as hexadecimal data along with the following instruction,
removing all special casing for the EXTEND prefix and making its
handling rely on its opcode table entry, except where it is considered a
part of an extendable instruction.
include/
* opcode/mips.h (mips_opcode_32bit_p): New inline function.
gas/
* config/tc-mips.c (micromips_insn_length): Use
`mips_opcode_32bit_p'.
(is_size_valid): Adjust description.
(is_size_valid_16): New function.
(validate_mips_insn): Use `mips_opcode_32bit_p' in MIPS16
operand decoding.
(validate_mips16_insn): Remove `a' and `i' operand code special
casing, use `mips_opcode_32bit_p' to determine instruction
width.
(append_insn): Adjust forced MIPS16 instruction size
determination.
(match_mips16_insn): Likewise. Don't shift the instruction's
opcode with the `a' and `i' operand codes. Use
`mips_opcode_32bit_p' in operand decoding.
(match_mips16_insns): Check for forced instruction size's
validity.
(mips16_ip): Don't force instruction size in the `noautoextend'
mode.
* testsuite/gas/mips/mips16-jal-e.d: New test.
* testsuite/gas/mips/mips16-jal-t.d: New test.
* testsuite/gas/mips/mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16-jal-t.l: New stderr output.
* testsuite/gas/mips/mips16-macro-e.l: New stderr output.
* testsuite/gas/mips/mips16-macro-t.l: New stderr output.
* testsuite/gas/mips/mips16-jal-e.s: New test source.
* testsuite/gas/mips/mips16-jal-t.s: New test source.
* testsuite/gas/mips/mips16-macro-e.s: New test source.
* testsuite/gas/mips/mips16-macro-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Always handle `extend' and
`insn' together, with `extend' as the high-order 16 bits.
(match_kind): New enum.
(print_insn_mips16): Rework for 32-bit instruction matching.
Do not dump EXTEND prefixes here.
* mips16-opc.c (mips16_opcodes): Move "extend" entry to the end.
Recode `match' and `mask' fields as 32-bit in absolute "jal" and
"jalx" entries.
binutils/
* testsuite/binutils-all/mips/mips16-extend-noinsn.d: Adjust
test for separate EXTEND prefix disassembly.
Respect any ASE flags recorded in ELF file structures for the purpose of
selecting instructions to be disassembled, preventing code from being
hex-dumped even though having been clearly indicated as valid at the
assembly time. Use date from the MIPS ABI flags structure if present,
and otherwise there may be an MDMX ASE flag set in the ELF file header.
For backwards compatibility only set extra flags and do not clear any,
preserving all previously set by the architecture selected to be
disassembled for.
include/
* elf/mips.h (Elf_Internal_ABIFlags_v0): Also declare struct
typedef as `elf_internal_abiflags_v0'.
bfd/
* bfd-in.h (elf_internal_abiflags_v0): New struct declaration.
(bfd_mips_elf_get_abiflags): New prototype.
* elfxx-mips.c (bfd_mips_elf_get_abiflags): New function.
* bfd-in2.h: Regenerate.
opcodes/
* mips-dis.c (mips_convert_abiflags_ases): New function.
(set_default_mips_dis_options): Also infer ASE flags from ELF
file structures.
binutils/
* testsuite/binutils-all/mips/mips-ase-1.d: New test.
* testsuite/binutils-all/mips/mips-ase-2.d: New test.
* testsuite/binutils-all/mips/mips-ase-3.d: New test.
* testsuite/binutils-all/mips/mips-ase-1.s: New test source.
* testsuite/binutils-all/mips/mips-ase-2.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
Use a tab rather than a space to separate `extend' and its uninterpreted
argument output, like with regular instructions. Separate hexadecimal
halves of undecoded extended instructions output with a space instead of
presenting them concatenated.
opcodes/
* mips-dis.c (print_insn_mips16): Use a tab rather than a space
to separate `extend' and its uninterpreted argument output.
Separate hexadecimal halves of undecoded extended instructions
output.
binutils/
* testsuite/binutils-all/mips/mips16-extend-noinsn.d: New test.
* testsuite/binutils-all/mips/mips16-extend-noinsn.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new test.
Complement commit dd8b7c222e ("MIPS: mips16e jalrc/jrc opcodes"),
<https://sourceware.org/ml/binutils/2005-07/msg00349.html>, and stop the
disassembler making a delay-slot adjustment for PC-relative operations
following either MIPS16e compact jumps, or undefined RR/J(AL)R(C)
encodings that have the `l' (link) and `ra' (source register is `ra')
bits set both at a time. Adjust code description for accuracy. Add a
suitable test case.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Avoid delay-slot
adjustment for PC-relative operations following MIPS16e compact
jumps or undefined RR/J(AL)R(C) encodings.
binutils/
* testsuite/binutils-all/mips/mips16-pcrel.d: New test.
* testsuite/binutils-all/mips/mips16-pcrel.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new test.
This patch fixes:
- fpus and fpud are swaped.
- quarkse_em doesn't include FPX extensions.
- auto guessed opcode mechanism may ignore the option passed via -M<feature> option.
opcodes/
2016-11-29 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (is_compatible_p): Remove function.
(skip_this_opcode): Don't add any decoding class to decode list.
Remove warning.
(find_format_from_table): Go through all opcodes, and warn if we
use a guessed mnemonic.
binutils/
2016-11-29 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/binutils-all/arc/objdump.exp (Warning test): Update
test.
PR binutils/20751
* nm.c (with_symbol_versions): New local variable.
(long_options): Add --with-symbol-versions.
(usage): Mention --with-symbol-versions.
(print_symbol): If with_symbol_versions is set then display the
version information associated with the symbol.
* NEWS: Mention the new feature.
* doc/binutils.texi (nm): Document the new option.
(objdump): Describe how symbol version information is displayed
for dynamic symbol dumps.
(readelf): Describe how symbol version information is displayed.
* testsuite/binutils-all/nm.exp: Add a test of the new feature.
* readelf.c (apply_relocations): Fail if the symbol table section
linked to by the reloc section does not have either the SHT_SYMTAB
or SHT_DYNSYM type.
(print_gnu_note): Decode the contents of NT_GNU_HWCAP notes.
Print the contents of unknown note types.
(process_note): Add the file and section to the parameter list.
Use print_symbol to display the note name.
Display the contents of unknown note types.
(process_corefile_note_segment): Rename to process_notes_at.
Add section parameter. Apply relocations to the notes when
loading from a section. Display section name when processing
notes in a section.
* testsuite/binutils-all/readelf.n: Update expected output.
As pointed out in PR binutils/19020, those tests were still failing when doing
remote testing. This is because the binary files weren't being copied over to
the remote host for testing.
FAIL: binutils-all/pr19020a
FAIL: binutils-all/pr19020b
This small patch fixes this up to make things pass.
binutils/ChangeLog:
2016-10-14 Luis Machado <lgustavo@codesourcery.com>
* testsuite/lib/utils-lib.exp (run_dump_test): Call remote_download
to copy file to remote host.
Fixes failures on alpha, ia64, mcore, metag, moxie, and pj due to lack
of 16-bit relocs.
* testsuite/binutils-all/remove-relocs-01.s: Use .dc.a, not .word.
The objcopy and strip tools make use of the bfd library to manipulate
the state of the input file (to produce an output file). Within the
input file (for ELF at least), relocations are held within a section,
and so, if the user wanted to remove the relocations, but keep the
section to which the relocations would have been applied, it is tempting
to think that specifying the name of a relocation section to objcopy's
--remove-section option might do what you want, for example:
objcopy --remove-section=.rela.text input.elf output.elf
However, this does not work. The reason is that when the input file is
loaded, relocations are not managed as sections, but are, instead,
loaded as data associated with the section to which the relocations
would be applied. In our example above the relocations in '.rela.text'
are held as data on the section '.text' once 'input.elf' is loaded.
One task that objcopy and strip do is copy the relocations from the
input file to the output file if the section is also being copied from
the input file to the output file.
This commit adds a new command line option for objcopy and strip,
--remove-relocations, which can be used to remove the relocations, while
keeping the section that the relocations would have been applied to, for
example:
objcopy --remove-relocations=.text input.elf output.elf
in this case the section '.text' will appear in both 'input.elf' and
'output.elf', but any relocations in 'input.elf' that apply to '.text'
will not be present in 'output.elf'.
I have also added a special case to the handling of --remove-section
that spots if a user tries to remove a relocation section (currently
this is done by spotting the '.rela.' or '.rel.' prefix) and forwards
the request to --remove-relocations.
As with --remove-section and --only-section the --remove-relocations
option supports the '!' prefix on the section-patterns it takes to allow
for sections to be specifically not matched.
There are tests for all the new functionality.
binutils/ChangeLog:
* doc/binutils.texi (objcopy): Document 'remove-relocations'.
(strip): Likewise.
* objcopy.c (SECTION_CONTEXT_REMOVE_RELOCS): Define.
(enum command_line_switch): Add 'OPTION_REMOVE_RELOCS'.
(struct option strip_options): Add 'remove-relocations'.
(struct option copy_options): Likewise.
(copy_usage): Likewise.
(strip_usage): Likewise.
(handle_remove_relocations_option): New function.
(discard_relocations): New function.
(handle_remove_section_option): New function.
(copy_relocations_in_section): Use discard_relocations.
(strip_main): Use handle_remove_section_option for
'remove-section', and handle 'remove-relocations' option.
(copy_main): Likewise.
* testsuite/binutils-all/objcopy.exp: Run new tests.
* testsuite/binutils-all/remove-relocs-01.d: New file.
* testsuite/binutils-all/remove-relocs-01.s: New file.
* testsuite/binutils-all/remove-relocs-02.d: New file.
* testsuite/binutils-all/remove-relocs-03.d: New file.
* testsuite/binutils-all/remove-relocs-04.d: New file.
* testsuite/binutils-all/remove-relocs-05.d: New file.
* testsuite/binutils-all/remove-relocs-06.d: New file.
For symbol matching, prefixing a pattern with '!' will indicate a
non-matching pattern, however, this is not the case for section
patterns. As a result it is not possible to say "apply this action to
all sections except ...".
With this commit the objcopy and strip tools now support '!' prefix for
section patterns, so we can say:
objcopy --remove-section="*" --remove-section="!.text*"
Which will remove all sections, except those matching the pattern
'.text*'.
binutils/ChangeLog:
* objcopy.c (find_section_list): Handle section patterns starting
with '!' being a non-matching pattern.
* doc/binutils.texi (objcopy): Give example of using '!' with
--remove-section and --only-section.
(strip): Give example of using '!' with --remove-section.
* testsuite/binutils-all/data-sections.s: New file.
* testsuite/binutils-all/only-section-01.d: New file.
* testsuite/binutils-all/remove-section-01.d: New file.
* testsuite/binutils-all/objcopy.exp: Run new tests.
* NEWS: Mention new feature.
* testsuite/binutils-all/objcopy.exp
(objcopy_test_without_global_symbol): Expect this test to fail on
the AArch64 and ARM targets, since they preserve their mapping
symbols.
Complement commit a43942db49 ("LD/ELF: Unify STB_GNU_UNIQUE handling")
and use `supports_gnu_unique' with the `unique_symbol' and `type' tests,
fixing failures like:
.../binutils/testsuite/binutils-all/unique.s: Assembler messages:
.../binutils/testsuite/binutils-all/unique.s:2: Error: symbol type "gnu_unique_object" is supported only by GNU targets
ERROR: .../binutils/testsuite/binutils-all/unique.s: assembly failed
UNRESOLVED: ar unique symbol in archive
.../binutils/ar -s -r -c tmpdir/artest.a tmpdir/unique.o
Executing on host: .../binutils/ar -s -r -c tmpdir/artest.a tmpdir/unique.o (timeout = 300)
.../binutils/ar: tmpdir/unique.o: No such file or directory
FAIL: ar unique symbol in archive
and:
.../gas/testsuite/gas/elf/type.s: Assembler messages:
.../gas/testsuite/gas/elf/type.s:30: Error: symbol type "gnu_unique_object" is supported only by GNU targets
../as-new: BFD (GNU Binutils) 2.26.51.20160628 internal error, aborting at .../gas/write.c:608 in size_seg
../as-new: Please report this bug.
.../gas/testsuite/../../binutils/readelf -s dump.o | grep "1 *\[FIONTCU\]" > dump.out
Executing on host: sh -c {.../gas/testsuite/../../binutils/readelf -s dump.o >readelf.out 2>gas.stderr} /dev/null (timeout = 300)
readelf: Error: dump.o: Failed to read file's magic number
FAIL: elf type list
on MIPS/FreeBSD targets:
mips-freebsd -FAIL: ar unique symbol in archive
mips-freebsd -FAIL: elf type list
mips64-freebsd -FAIL: ar unique symbol in archive
mips64-freebsd -FAIL: elf type list
mips64el-freebsd -FAIL: ar unique symbol in archive
mips64el-freebsd -FAIL: elf type list
mipsel-freebsd -FAIL: ar unique symbol in archive
mipsel-freebsd -FAIL: elf type list
binutils/
* testsuite/binutils-all/ar.exp: Use `supports_gnu_unique' with
the `unique_symbol' test.
gas/
* testsuite/gas/elf/elf.exp: Use `supports_gnu_unique' with the
`type' test.
Some MIPS targets use a named section symbol rather than a symbol with
no name as is used with most ELF targets. When renaming sections, the
named section symbol needs to be renamed too.
Rather than fix this bug, I'd originally intended to just correct the
xfail added recently for update-1.o vs update4.o in update-section.exp,
using the same set of targets for the localize-hidden-1 mips xfail.
I'd extracted that target test into a new function, is_bad_symtab. It
turns out to be useful in readelf.exp too.
bfd/
* config.bfd: Delete mips vxworks patterns matched earlier.
Combine mips*-*-none with mips*-*-elf*.
binutils/
* objcopy.c (find_section_rename): Forward declare. Remove
ibfd and sec_ptr param. Add old_name param. Allow for NULL
returned_flags. Move read of section name and flags to..
(setup_section): ..here. Update find_section_rename call.
(filter_symbols): Rename section symbols for renamed sections.
(copy_object): Call filter_symbols when renamed sections.
* testsuite/lib/binutils-common.exp (is_bad_symtab): New.
* testsuite/binutils-all/update-section.exp: Revert 96037eb0
mips xfail.
* testsuite/binutils-all/objcopy.exp (copy_executable): Use
is_bad_symtab.
(localize-hidden-1): xfail if is_bad_symtab.
* testsuite/binutils-all/readelf.exp: Use is_bad_symtab to select
between mips/tmips.
* testsuite/binutils-all/ar.exp: Skip tests for Alpha target.
Skip bfdtest1 tests for tic30 target.
* testsuite/binutils-all/arm/objdump.exp: Skip for aout arm
target.
* testsuite/binutils-all/compress.exp: Expect some tests to fail
on the nds32.
* testsuite/binutils-all/copy-3.d: Skip for go32 targets.
* testsuite/binutils-all/copy-4.d: Skip for AIX and linuxecoff
targets.
* testsuite/binutils-all/nm.exp: Treat beos based targets as ELF
targets.
* testsuite/binutils-all/objcopy.exp: Only run reverse bytes tests
if the bintest.o file was created. Use the
get_standard_section_names proc to get the name of the data
section.
* testsuite/binutils-all/objdump.exp: Update regexps to allow for
RX section names.
* testsuite/binutils-all/readelf.exp: Use
get_standard_section_names proc to get the name of the data
section.
* testsuite/binutils-all/readelf.r: Allow for non standard text
section names.
* testsuite/binutils-all/readelf.s: Update regexps for tilepro.
* testsuite/binutils-all/size.exp: Allow for non standard section
names.
* testsuite/binutils-all/update-section.exp: Expect comapre 1vs4
to fail on mips targets.
* testsuite/lib/utils-lib.exp (default_binutils_run): Use
get_standard_section_names proc.
(run_dump_test): Likewise.
(proc get_standard_section_names): New proc.
Mixing MIPS16 and microMIPS code in a single binary isn't usually
supported but GAS happily produces such code if requested. However it
is not correctly disassembled even if a symbol table is available and
function symbols are correctly anotated with the ISA mode. This is
because the ELF-header global microMIPS ASE flag takes precedence over
MIPS16 function annotation, causing them to be treated as regular MIPS
code.
Correct the problem by respecting function symbol anotation regardless
of the ELF-header flag.
binutils/
* testsuite/binutils-all/mips/mixed-mips16-micromips.d: New test.
* testsuite/binutils-all/mips/mixed-mips16-micromips.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new test.
opcodes/
* mips-dis.c (is_compressed_mode_p): Add `micromips_p' operand,
replacing references to `micromips_ase' throughout.
(_print_insn_mips): Don't use file-level microMIPS annotation to
determine the disassembly mode with the symbol table.
Correct a regression introduced with commit 685080f210 ("Adds support
for generating notes in V850 binaries.") which replaced rather than
extending the call to `_bfd_elf_copy_private_bfd_data' with
`v850_elf_copy_private_bfd_data'. Consequently ELFOSABI_GNU marking is
not propagated to output by `objcopy' from objects containing
STB_GNU_UNIQUE symbols.
bfd/
* elf32-v850.c (v850_elf_copy_notes): New function, factored out
from...
(v850_elf_copy_private_bfd_data): ... here. Call the new
function and `_bfd_elf_copy_private_bfd_data'.
binutils/
* testsuite/binutils-all/objcopy.exp: Don't skip the `strip-10'
test for the V850.
binutils* testsuite/lib/binutils-common.exp (is_elf_format): Add avr-*-*.
ld * testsuite/ld-elf/pr18735.d: Allow other symbols.
* testsuite/ld-elf/sec64k.exp: Skip 64ksec for avr.
* testsuite/ld-gc/pr14265.d: Allow other symbols.
* testsuite/ld-plugin/plugin.exp: Add PR ld/17973 to
plugin_tests only if check_shared_lib_support is true.
* testsuite/ld-selective/selective.exp: Add --section-start
flag for avr.
PR target/19722
opcodes * aarch64-dis.c (aarch64_opcode_decode): Run verifier if present.
* aarch64-opc.c (verify_ldpsw): New function.
* aarch64-opc.h (verify_ldpsw): New prototype.
* aarch64-tbl.h: Add initialiser for verifier field.
(LDPSW): Set verifier to verify_ldpsw.
binutils* testsuite/binutils-all/aarch64/illegal.s: New test.
* testsuite/binutils-all/aarch64/illegal.d: New test driver.
include * opcode/aarch64.h (struct aarch64_opcode): Add verifier field.
PR target/19938
bfd * elf-bbfd.h (struct elf_backend_data): New field:
elf_strtab_flags.
New field: elf_backend_set_special_section_info_and_link
* elfxx-target.h (elf_backend_strtab_flags): Define if not already
defined.
(elf_backend_set_special_section_info_and_link): Define if not
already defined.
(elfNN_bed): Use elf_backend_set_special_section_info_and_link and
elf_backend_strtab_flags macros to initialise fields in structure.
* elf.c (_bfd_elf_make_section_from_shdr): Check for SHF_STRINGS
being set even if SHF_MERGE is not set.
(elf_fake_sections): Likewise.
(section_match): New function. Matches two ELF sections based
upon fixed characteristics.
(find_link): New function. Locates a section in a BFD that
matches a section in a different BFD.
(_bfd_elf_copy_private_bfd_data): Copy the sh_info and sh_link
fields of reserved sections.
(bfd_elf_compute_section_file_positions): Set the flags for the
.shstrtab section based upon the elf_strtab_flags field in the
elf_backend_data structure.
(swap_out_syms): Likewise for the .strtab section.
* elflink.c (bfd_elf_final_link): Set the flags for the
.strtab section based upon the elf_strtab_flags field in the
elf_backend_data structure.
* elf32-i386.c (elf32_i386_set_special_info_link): New function.
(elf_backend_strtab_flags): Set to SHF_STRINGS for Solaris
targets.
(elf_backend_set_special_section_info_and_link): Define for
Solaris targets.
* elf32-sparc.c: Likewise.
* elf64-x86-64.c: Likewise.
binutils* testsuite/binutils-all/i386/compressed-1b.d: Allow for the
string sections possibly having the SHF_STRINGS flag bit set.
* testsuite/binutils-all/i386/compressed-1c.d: Likewise.
* testsuite/binutils-all/readelf.s: Likewise.
* testsuite/binutils-all/readelf.s-64: Likewise.
* testsuite/binutils-all/x86-64/compressed-1b.d: Likewise.
* testsuite/binutils-all/x86-64/compressed-1c.d: Likewise.
gas * testsuite/gas/i386/ilp32/x86-64-unwind.d: Allow for the string
sections possibly having the SHF_STRINGS flag bit set.
* testsuite/gas/i386/x86-64-unwind.d: Likewise.
This commit restructures the selection of the default cpu/mach so that
the choice is made from md_begin (if the user has not provided a command
line choice). This will reduce the amount of change needed in a later
patch.
At the request of Synopsys, the default architecture changes to ARC700
from this commit, previously the default was a non-existent
super-architecture that contained all instructions from all arc
variants. There's some clean up associated with removing the default
merged architecture, and a small test fix now that the default is
ARC700.
binutils/ChangeLog:
* testsuite/binutils-all/objdump.exp (cpus_expected): Add ARC700
to the architecture list.
gas/ChangeLog:
* config/tc-arc.c (arc_target): Delay initialisation until
arc_select_cpu.
(arc_target_name): Likewise.
(arc_features): Likewise.
(arc_mach_type): Likewise.
(cpu_types): Remove "all" entry.
(arc_select_cpu): New function, most of the content is from...
(md_parse_option): ... here. Call new arc_select_cpu.
(md_begin): Call arc_select_cpu if needed, default is now arc700.
include/ChangeLog:
* opcode/arc.h (ARC_OPCODE_BASE): Delete.
opcodes/ChangeLog:
* arc-opc.c (BASE): Delete.
bfd PR binutils/19775
* archive.c (bfd_generic_openr_next_archived_file): Allow zero
length elements in the archive.
binutils PR binutils/19775
* testsuite/binutils-all/ar.exp (proc empty_archive): New proc.
Run the new proc.
* testsuite/binutils-all/empty: New, empty, file.
The HAS_RELOC bit should be cleared when relocations are removed from
relocatable files.
bfd/
PR binutils/19547
* elf.c (assign_section_numbers): Clear HAS_RELOC if there are
no relocations in relocatable files.
binutils/
PR binutils/19547
* testsuite/binutils-all/objcopy.exp
(objcopy_test_without_global_symbol): New proc.
Run objcopy_test_without_global_symbol.
* testsuite/binutils-all/pr19547.c: New file.
We should set BFD_DECOMPRESS to decompress debug sections when reading in
DWARF debug sections.
bfd/
PR binutils/19523
* dwarf2.c (_bfd_dwarf2_slurp_debug_info): Set BFD_DECOMPRESS to
decompress debug sections.
binutils/
PR binutils/19523
* Makefile.am (check-DEJAGNU): Pass CC and CC_FOR_BUILD to
runtest.
* Makefile.in: Regenerated.
* testsuite/binutils-all/compress.exp (test_gnu_debuglink): New
proc.
Run test_gnu_debuglink for native ELF build.
Oddly, config.sub converts a duple ending in -elf for these target to
-unknown-none, which means they aren't seen as elf targets by
binutils. So, counter that. This exposes a number of testsuite
issues (ones you would have seen if configuring with a full triple,
say m68hc11-unknown-elf).
binutils/
* testsuite/lib/binutils-common.exp (is_elf_format): Return true
for m68hc11/12 and xgate triples.
gas/
* testsuite/gas/cfi/cfi.exp: Exclude m68hc11/12 from m68k test.
ld/
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Exclude xgate.
* testsuite/ld-elf/endsym.d: xfail m68hc11/12 and xgate.
* testsuite/ld-elf/pr14156a.d: Likewise.
* testsuite/ld-elf/pr14926.d: Don't run for m68hc11/12 and xgate.
* testsuite/ld-elf/sec64k.exp: Likewise.
When the DWARF address size is 32-bit, but the host machine is 64-bit,
objdump fails to spot base addresses specified in the .debug_ranges and
.debug_loc lists.
As an example, here is the output when dumping an example .debug_ranges
section with the pre-patched objdump:
Contents of the .debug_ranges section:
Offset Begin End
00000000 ffffffff 00000004 (start > end)
00000000 00000000 00000004
00000000 ffffffff 00000008 (start > end)
00000000 00000000 00000004
00000000 <End of list>
And this is what the same section looks like when dumped with the
patched version of objdump:
Contents of the .debug_ranges section:
Offset Begin End
00000000 ffffffff 00000004 (base address)
00000000 00000004 00000008
00000000 ffffffff 00000008 (base address)
00000000 00000008 0000000c
00000000 <End of list>
binutils/ChangeLog:
* dwarf.c (is_max_address): New function.
(display_loc_list): Remove out of date comment, use
is_max_address.
(display_debug_ranges): Likewise.
binutils/testsuite/ChangeLog:
* binutils-all/objdump.exp: Add test for .debug_ranges decode.
* binutils-all/dw2-ranges.S: New file.
* binutils-all/dw2-ranges.W: New file.
PR binutils/19104
binutils * objcopy.c (command_line_switch): Add OPTION_ADD_SYMBOL.
(copy_options): Add add-symbol.
(copy_usage): Likewise.
(parse_symflags): New function.
(need_sym_before): New function.
(create_new_symbol): New function.
(filter_symbols): Add code to insert new symbols.
(copy_main): Process OPTION_ADD_SYMBOL.
* doc/binutils.texi: Document new feature.
* NEWS: Add note about the new feature.
tests * binutils-all/add-symbol.d: New test.
* binutils-all/objcopy.exp: Run the new test.
The main aim of this patch is to perform more objcopy tests when we
can build executables but not run them. ie. non-native with cross
compiler available.
* binutils-all/objcopy.exp: Delete trailing whitespace. Use
"string equal" rather than "string match" when making simple
string comparisons. Revert 2008-07-08 host_triplet checks.
Perform non-run tests when we can build executable.
(strip_executable, strip_executable_with_saving_a_symbol): Move
run test later. Take extra param on whether to perform run test.
Update callers.
(keep_debug_symbols_and_test_copy): Delete unused vars.
