(AC_FUNC_SETPGRP): Add.
* aclocal.m4, configure, config.in: Regenerated.
* inflow.c (gdb_setpgid): Get rid of NEED_POSIX_SETPGID and
SETPGRP_ARGS. Always use setpgid if it is available, fall back on
setpgrp if it isn't. Use SETPGRP_VOID (defined by autoconf) to
distinguish between the two setpgrp flavours.
* config/xm-sysv4.h, config/arm/xm-linux.h,
config/i386/xm-i386aix.h, config/i386/xm-sco.h,
config/i386/xm-linux.h, config/i386/xm-ptx.h,
config/m68k/xm-linux.h, config/powerpc/xm-linux.h,
config/sparc/xm-linux.h, config/sparc/xm-sun4sol2.h,
config/ia64/xm-linux.h (NEED_POSIX_SETPGID): Remove.
* config/rs6000/xm-rs6000.h (SETPGRP_ARGS): Remove.
config/m68k/xm-linux.h, config/powerpc/xm-linux.h,
config/sparc/xm-linux.h, config/ia64/xm-linux.h (HAVE_TERMIOS):
Removed. Taken care of by autoconf and terminal.h.
2000-04-20 Scott Bambrough <scottb@netwinder.org>
* arm-linux-nat.c (PIDGET, TIDGET): New.
(get_thread_id, GET_THREAD_ID): New.
(fetch_nwfpe_register, store_nwfpe_register): New.
(fetch_register, store_register): New.
(fetch_fpregister, store_fpregister): New.
(fill_gregset, supply_gregset): New.
(fill_fpregset, supply_fpregset): New.
(fetch_fpregs): Modified to use thread id's.
(store_fpregs): Modified to use thread id's and
fetch_nwfpe_register.
(fetch_regs): Modified to use thread id's.
(store_regs): Modified to use thread id's.
(fetch_inferior_registers): Modified to handle single register
fetches.
(store_inferior_registers): Modified to handle single register
stores.
(arm_linux_register_u_addr): Removed.
* configure.tgt: Added gdbserver to configdirs for arm*-*-linux*.
* config/arm/linux.mh
(NATDEPFILES): Removed core-aout.o. Added core-regset.o.
(LOADLIBES): Define.
* config/arm/nm-linux.h: Include config/nm-linux.h.
(ATTACH_DETACH): Removed. Defined in config/nm-linux.h.
(REGISTER_U_ADDR): Removed.
(SVR4_SHARED_LIBS): Removed. Defined in config/nm-linux.h.
(#include "solib.h"): Removed. Included via config/nm-linux.h.
* gdbarch.sh (IEEE_FLOAT): New entry.
* gdbarch.c, gdbarch.h: Regenerated.
* valprint.c (IEEE_FLOAT): Provide a default #definition for this.
(print_floating): Use IEEE_FLOAT as if it were an expression; use
the code specific to IEEE-format numbers whenever the value of
IEEE_FLOAT is non-zero.
* config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
config/arc/tm-arc.h, config/arm/tm-arm.h, config/fr30/tm-fr30.h,
config/h8300/tm-h8300.h, config/i386/tm-i386.h,
config/i960/tm-i960.h, config/m88k/tm-m88k.h,
config/mips/tm-mips.h, config/pa/tm-hppa.h,
config/sparc/tm-sparc.h, config/delta/tm-delta.h,
config/frv/tm-frv.h (IEEE_FLOAT): For all ports that #define
IEEE_FLOAT, make sure they give it the value (1).
* ChangeLog: Correct date on last entry.
* arm-linux-tdep.c (arm_linux_push_arguments): New function.
* config/arm/tm-linux: Redefined PUSH_ARGUMENTS for Linux.
* config/arm/tm-embed: Fix build warning from redefinition of
LOWEST_PC.
* config/arm/tm-arm.h: Remove TARGET_BYTE_ORDER_SELECTABLE.
* config/arm/tm-wince.h: Remove TARGET_BYTE_ORDER_SELECTABLE and
TARGET_BYTE_ORDER. Add TARGET_BYTE_ORDER_SELECTABLE_P to
override default in tm-arm.h. Use default target byte order
from tm-arm.h.
dependencies. Created ARM Linux specific arm-linux-tdep.c file and moved
missing code into it from arm-linux-nat.c.
2000-04-05 Scott Bambrough <scottb@netwinder.org>
* arm-linux-tdep.c: New file.
* arm-linux-nat.c (fetch_fpregs): Remove unused code.
(arm_get_longjmp_target): Moved it and all defines
it uses to arm-linux-tdep.c.
(arm_linux_extract_return_value): Moved to
arm-linux-tdep.c.
* config/arm/linux.mt: Add arm-linux-tdep.c to TDEPFILES.
* config/arm/linux.mh (NATDEPFILES): Removed core-regset.o.
Not used. Required to get GDB to build on glibc 2.1.3.
* config/arm/tm-linux.h (LOWEST_PC): Undefine LOWEST_PC
before redefining. Gets rid of compiler warning.
* config/arm/tm-wince.h: New file.
* config/arm/wince.mt New file.
* config/sh/tm-wince.h: New file.
* config/sh/wince.mt New file.
* config/mips/tm-wince.h: New file.
* config/mips/wince.mt New file.
* wince.c: New file.
* wince-stub.c: New file.
* wince-stub.h: New file.
* sh-tdep.c: Use correct register names for Windows CE.
* callback.[ch]: New files.
* remote-rdp.c: Support for the ARM RDP monitor.
* Makefile: Update.
* arm-tdep.c (arm_othernames): New.
(_initialize_arm_tdep): install 'othernames' command.
(arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New.
* configure.in: Check for termios.h, termio.h and sgtty.h.
(i[345]86-*-win32*): New host.
* configure: Regenerated.
* inflow.c: Clean up inclusions.
* main.c (main): Check for WINGDB, not WIN32.
* printcmd.c (do_examine): Put QUIT test in loop.
* remote-hms.c (e7000_load): Delete.
(hms_ops): Point to generic_load instead.
* remote-hms.c (hms_ops): Point to generic_load.
* remote-sim.c (sim_callback_write_stdout): Becomes
gdbsim_write_stdout.
(gdbsim_load): Call generic_load.
* remote-utils.c (gr_load_image): Delete.
* ser-unix.c (terminal.h): Include instead of havig
own #if tree.
(hardwire_flush_input): Reset input buffer too.
* source.c (openp): If WIN32 then open file in binary mode.
* terminal.h: Configure IO mechanism using autoconf defines if available and
not overriden.
* utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check.
* config/arm/arm.mt (TDEPFILES): Add remote-rdp.o
* config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE.
(ADDR_BITS_REMOVE): New.
(ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New.
(INST_xx): New
(FRAME_FIND_SAVED_REGS): Pass the right argument.
(arm_get_next_pc): Declare.
* mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
BROKEN_LARGE_ALLOCA. Do the cleanup before returning, rather than
leaving it on the chain. Reindent much of this function.
* config/sparc/{xm-sun4sol2.h,xm-sun4os4.h},
config/i386/{xm-sun386.h,xm-i386m3.h,xm-i386mach.h},
config/m68k/{sun3os4.h,xm-news.h,xm-hp300hpux.h},
config/ns32k/xm-ns32km3.h: Remove all references to
BROKEN_LARGE_ALLOCA; with the above change it is no longer needed.
* main.c, fork-child.c, many config files: Remove all
SET_STACK_LIMIT_HUGE code; with the above changes it should no
longer be needed.
* symtab.c (lookup_partial_symbol): Use if and abort, not assert.
This avoids __eprintf troubles.
* main.c (main): Surround in #ifndef MAIN_OVERRIDE. Move
initialization code which needs to be called even if we bypass the
command line stuff into gdb_init.
* utils.c (fputs_unfiltered): Surround in #ifndef
FPUTS_UNFILTERED_OVERRIDE.
* Makefile.in (libgdb.a): New target.
* utils.c: Rearrange I/O stuff a bit so that all output goes
through fputs_unfiltered. Use vasprintf; removes arbitrary limit
which made %s not work with arbitrarily large strings.
* printcmd.c (printf_command): Use printf_filtered, not
printf_unfiltered and printf, now that arbitrary limit is gone.
